A Light-Weight On-Chip Monitoring Network for Dynamic Adaptation and Calibration

Current nanometer technologies suffer within-die parameter uncertainties, varying workload conditions, aging, and temperature effects that cause a serious reduction on yield and performance. In this scenario, monitoring, calibration, and dynamic adaptation become essential, demanding systems with a collection of multi purpose monitors and exposing the need for light-weight monitoring networks. This paper presents a new monitoring network paradigm able to perform an early prioritization of the information. This is achieved by the introduction of a new hierarchy level, the threshing level. Targeting it, we propose a time-domain signaling scheme over a single-wire that minimizes the network switching activity as well as the routing requirements. To validate our approach, we make a thorough analysis of the architectural trade-offs and expose two complete monitoring systems that suppose an area improvement of 40% and a power reduction of three orders of magnitude compared to previous works.

A Monitoring Infrastructure for FPGA Self-Awareness and Dynamic Adaptation

Variabilities associated with CMOS evolution affect the yield and performance of current digital designs. FPGAs, which are widely used for fast prototyping and implementation of digital circuits, also suffer from these issues. Proactive approaches start to appear to achieve self-awareness and dynamic adaptation of these devices. To support these techniques we propose the employment of a multi-purpose sensor network. This infrastructure, through adequate use of configuration and automation tools, is able to obtain relevant data along the life cycle of an FPGA. This is realised at a very reduced cost, not only in terms of area or other limited resources, but also regarding the design effort required to define and deploy the measuring infrastructure. Our proposal has been validated by measuring inter-die and intra-die variability in different FPGA families.

Core physics and safety analysis of Generation-IV Sodium Fast Reactors using existing and newly developed computational tools

El futuro de la energía nuclear de fisión dependerá, entre otros factores, de la capacidad que las nuevas tecnologías demuestren para solventar los principales retos a largo plazo que se plantean. Los principales retos se pueden resumir en los siguientes aspectos: la capacidad de proporcionar una solución final, segura y fiable a los residuos radiactivos; así como dar solución a la limitación de recursos naturales necesarios para alimentar los reactores nucleares; y por último, una mejora robusta en la seguridad de las centrales que en definitiva evite cualquier daño potencial tanto en la población como en el medio ambiente como consecuencia de cualquier escenario imaginable o más allá de lo imaginable. Siguiendo estas motivaciones, la Generación IV de reactores nucleares surge con el compromiso de proporcionar electricidad de forma sostenible, segura, económica y evitando la proliferación de material fisible. Entre los sistemas conceptuales que se consideran para la Gen IV, los reactores rápidos destacan por su capacidad potencial de transmutar actínidos a la vez que permiten una utilización óptima de los recursos naturales. Entre los refrigerantes que se plantean, el sodio parece una de las soluciones más prometedoras. Como consecuencia, esta tesis surgió dentro del marco del proyecto europeo CP-ESFR con el principal objetivo de evaluar la física de núcleo y seguridad de los reactores rápidos refrigerados por sodio, al tiempo que se desarrollaron herramientas apropiadas para dichos análisis. Efectivamente, en una primera parte de la tesis, se abarca el estudio de la física del núcleo de un reactor rápido representativo, incluyendo el análisis detallado de la capacidad de transmutar actínidos minoritarios. Como resultado de dichos análisis, se publicó un artículo en la revista Annals of Nuclear Energy [96]. Por otra parte, a través de un análisis de un hipotético escenario nuclear español, se evalúo la disponibilidad de recursos naturales necesarios en el caso particular de España para alimentar una flota específica de reactores rápidos, siguiendo varios escenarios de demanda, y teniendo en cuenta la capacidad de reproducción de plutonio que tienen estos sistemas. Como resultado de este trabajo también surgió una publicación en otra revista científica de prestigio internacional como es Energy Conversion and Management [97]. Con objeto de realizar esos y otros análisis, se desarrollaron diversos modelos del núcleo del ESFR siguiendo varias configuraciones, y para diferentes códigos. Por otro lado, con objeto de poder realizar análisis de seguridad de reactores rápidos, son necesarias herramientas multidimensionales de alta fidelidad específicas para reactores rápidos. Dichas herramientas deben integrar fenómenos relacionados con la neutrónica y con la termo-hidráulica, entre otros, mediante una aproximación multi-física. Siguiendo este objetivo, se evalúo el código de difusión neutrónica ANDES para su aplicación a reactores rápidos. ANDES es un código de resolución nodal que se encuentra implementado dentro del sistema COBAYA3 y está basado en el método ACMFD. Por lo tanto, el método ACMFD fue sometido a una revisión en profundidad para evaluar su aptitud para la aplicación a reactores rápidos. Durante ese proceso, se identificaron determinadas limitaciones que se discutirán a lo largo de este trabajo, junto con los desarrollos que se han elaborado e implementado para la resolución de dichas dificultades. Por otra parte, se desarrolló satisfactoriamente el acomplamiento del código neutrónico ANDES con un código termo-hidráulico de subcanales llamado SUBCHANFLOW, desarrollado recientemente en el KIT. Como conclusión de esta parte, todos los desarrollos implementados son evaluados y verificados. En paralelo con esos desarrollos, se calcularon para el núcleo del ESFR las secciones eficaces en multigrupos homogeneizadas a nivel nodal, así como otros parámetros neutrónicos, mediante los códigos ERANOS, primero, y SERPENT, después. Dichos parámetros se utilizaron más adelante para realizar cálculos estacionarios con ANDES. Además, como consecuencia de la contribución de la UPM al paquete de seguridad del proyecto CP-ESFR, se calcularon mediante el código SERPENT los parámetros de cinética puntual que se necesitan introducir en los típicos códigos termo-hidráulicos de planta, para estudios de seguridad. En concreto, dichos parámetros sirvieron para el análisis del impacto que tienen los actínidos minoritarios en el comportamiento de transitorios. Concluyendo, la tesis presenta una aproximación sistemática y multidisciplinar aplicada al análisis de seguridad y comportamiento neutrónico de los reactores rápidos de sodio de la Gen-IV, usando herramientas de cálculo existentes y recién desarrolladas ad' hoc para tal aplicación. Se ha empleado una cantidad importante de tiempo en identificar limitaciones de los métodos nodales analíticos en su aplicación en multigrupos a reactores rápidos, y se proponen interesantes soluciones para abordarlas. ABSTRACT The future of nuclear reactors will depend, among other aspects, on the capability to solve the long-term challenges linked to this technology. These are the capability to provide a definite, safe and reliable solution to the nuclear wastes; the limitation of natural resources, needed to fuel the reactors; and last but not least, the improved safety, which would avoid any potential damage on the public and or environment as a consequence of any imaginable and beyond imaginable circumstance. Following these motivations, the IV Generation of nuclear reactors arises, with the aim to provide sustainable, safe, economic and proliferationresistant electricity. Among the systems considered for the Gen IV, fast reactors have a representative role thanks to their potential capacity to transmute actinides together with the optimal usage of natural resources, being the sodium fast reactors the most promising concept. As a consequence, this thesis was born in the framework of the CP-ESFR project with the generic aim of evaluating the core physics and safety of sodium fast reactors, as well as the development of the approppriated tools to perform such analyses. Indeed, in a first part of this thesis work, the main core physics of the representative sodium fast reactor are assessed, including a detailed analysis of the capability to transmute minor actinides. A part of the results obtained have been published in Annals of Nuclear Energy [96]. Moreover, by means of the analysis of a hypothetical Spanish nuclear scenario, the availability of natural resources required to deploy an specific fleet of fast reactor is assessed, taking into account the breeding properties of such systems. This work also led to a publication in Energy Conversion and Management [97]. In order to perform those and other analyses, several models of the ESFR core were created for different codes. On the other hand, in order to perform safety studies of sodium fast reactors, high fidelity multidimensional analysis tools for sodium fast reactors are required. Such tools should integrate neutronic and thermal-hydraulic phenomena in a multi-physics approach. Following this motivation, the neutron diffusion code ANDES is assessed for sodium fast reactor applications. ANDES is the nodal solver implemented inside the multigroup pin-by-pin diffusion COBAYA3 code, and is based on the analytical method ACMFD. Thus, the ACMFD was verified for SFR applications and while doing so, some limitations were encountered, which are discussed through this work. In order to solve those, some new developments are proposed and implemented in ANDES. Moreover, the code was satisfactorily coupled with the thermal-hydraulic code SUBCHANFLOW, recently developed at KIT. Finally, the different implementations are verified. In addition to those developments, the node homogenized multigroup cross sections and other neutron parameters were obtained for the ESFR core using ERANOS and SERPENT codes, and employed afterwards by ANDES to perform steady state calculations. Moreover, as a result of the UPM contribution to the safety package of the CP-ESFR project, the point kinetic parameters required by the typical plant thermal-hydraulic codes were computed for the ESFR core using SERPENT, which final aim was the assessment of the impact of minor actinides in transient behaviour. All in all, the thesis provides a systematic and multi-purpose approach applied to the assessment of safety and performance parameters of Generation-IV SFR, using existing and newly developed analytical tools. An important amount of time was employed in identifying the limitations that the analytical nodal diffusion methods present when applied to fast reactors following a multigroup approach, and interesting solutions are proposed in order to overcome them.

A self-timed multipurpose delay sensor for field programmable gate arrays (FPGAs)

This paper presents a novel self-timed multi-purpose sensor especially conceived for Field Programmable Gate Arrays (FPGAs). The aim of the sensor is to measure performance variations during the life-cycle of the device, such as process variability, critical path timing and temperature variations. The proposed topology, through the use of both combinational and sequential FPGA elements, amplifies the time of a signal traversing a delay chain to produce a pulse whose width is the sensor’s measurement. The sensor is fully self-timed, avoiding the need for clock distribution networks and eliminating the limitations imposed by the system clock. One single off- or on-chip time-to-digital converter is able to perform digitization of several sensors in a single operation. These features allow for a simplified approach for designers wanting to intertwine a multi-purpose sensor network with their application logic. Employed as a temperature sensor, it has been measured to have an error of ±0.67 °C, over the range of 20–100 °C, employing 20 logic elements with a 2-point calibration.

Unearthing the roots of degradation of Quercus pyrenaica coppices: an integrative perspective from clonal structure to carbon budgets

Quercus pyrenaica es una especie rebrotadora de raíz intensa e históricamente aprovechada en monte bajo para la obtención de leñas, carbón y pastos. Debido al éxodo rural y a la aparición de nuevas fuentes energéticas, este aprovechamiento fue abandonado en la década de 1970. Desde entonces, las bajas producciones de madera y bellota y el puntisecado de los pies evidencian el generalizado estancamiento de estas masas. Uno de los mayores retos actuales de la selvicultura en el ámbito mediterráneo es encontrar usos alternativos para estos montes abandonados, siendo la conversión a monte alto una de las alternativas preferidas. Se han realizado resalveos de conversión, sin embrago, éstos se aplican sin un conocimiento integral de las causas de la degradación. En esta tesis doctoral, estudiamos un hipotético desequilibrio entre la parte radical y la parte aérea (R:S) de las cepas de rebollo como causa subyacente de su decaimiento. En una parcela experimental, aprovechada al menos desde el siglo XII, se realizaron análisis genéticos a priori para elucidar la estructura genética del rodal, y así estudiar la influencia del tamaño clonal en el funcionamiento de las cepas. Las cepas de mayor tamaño presentaron un menor crecimiento diametral de sus pies, así como mayores tasas de respiración radical, estimadas a partir de flujos internos de CO2 a través del xilema (FT) y de los flujos de CO2 del suelo. Estos resultados sugieren que el desequilibrio R:S aumenta con el tamaño clonal, dado que la eliminación periódica de órganos aéreos, al mismo tiempo que las raíces permanecen intactas, da lugar a un gran desarrollo del sistema radical que consume gran parte de los carbohidratos no estructurales (NSC) en respiración de mantenimiento, comprometiendo así el desarrollo de órganos aéreos. Se excavaron y pesaron dos cepas compuestas por cuatro y ocho pies, las cuales mostraron ratios R:S (0.5 y 1, respectivamente) superiores a los registrados en pies de origen sexual. Al igual que en otras especies rebrotadoras de raíz, se observaron altas concentraciones de NSC en las raíces (> 20% en primavera) y una gran proporción de albura en el sistema radical (52%) que alberga una notable reserva de NSC (87 kg en la cepa de mayor tamaño). En el sistema radical de dicha cepa, estimada mediante dataciones radiocarbónicas en 550 años de edad, se contaron 248 uniones radicales. La persistencia de sistemas radicales grandes, viejos, y altamente interconectados sugiere que la gran cantidad de recursos almacenados y consumidos en las raíces compensan un pobre desarrollo aéreo con una alta resiliencia vegetativa. Para un mejor entendimiento de los balances de carbono y del agotamiento de NSC en las cepas de rebollo, se midieron los flujos internos y externos de CO2 en troncos y los flujos de CO2 del suelo, y se estimó la respiración de órganos aéreos (RS) y subterráneos (RR). Estacionalmente, RS y RR reflejaron las dinámicas de flujo de savia y de crecimiento del tronco, y estuvieron determinadas principalmente por los flujos externos de CO2, dada la escasa contribución de FT a RS y RR (< 10% y < 2%, respectivamente). En una escala circadiana, la contribución de FT a RS aumentó hasta un 25% en momentos de alta transpiración. Las bajas concentraciones de CO2 en el xilema ([CO2] hasta un 0.11%) determinaron comparativamente unos bajos FT, probablemente causados por una limitada respiración del xilema y una baja resistencia a la difusión radial del CO2 impuestos por la sequía estival. Los pulsos de [CO2] observados tras las primeras lluvias de otoño apoyan esta idea. A lo largo del periodo vegetativo, el flujo medio de CO2 procedente del suelo (39 mol CO2 day-1) fue el mayor flujo respiratorio, tres y cuatro veces superior a RS (12 mol CO2 day-1) y RR (8-9 mol CO2 day-1), respectivamente. Ratios RR/RS menores que la unidad evidencian un importante peso de la respiración aérea como sumidero de carbono adicional. Finalmente, se ensayó el zanjado de raíces y el anillamiento de troncos como tratamientos selvícolas alternativos con el objetivo de aumentar las reservas de NSC en los troncos de las cepas. Los resultados preliminares desaconsejan el zanjado de raíces por el alto coste derivado posiblemente de la cicatrización de las heridas. El anillado de troncos imposibilitó el transporte de NSC a las raíces y aumentó la concentración de almidón por encima de la zona anillada, mientras que sistema radical se mantiene por los pies no anillados de la cepa. Son necesarias más mediciones y datos adicionales para comprobar el mantenimiento de esta respuesta positiva a largo plazo. Para concluir, destacamos la necesidad de estudios multidisciplinares que permitan una comprensión integral de la degradación de los rebollares ibéricos para poder aplicar a posteriori una gestión adecuada en estos montes bajos abandonados. ABSTRACT Quercus pyrenaica is a vigorous root-resprouting species intensively and historically coppiced for firewood, charcoal and woody pastures. Due to the rural exodus and the appearance of new energy sources, coppicing was abandoned towards 1970. Since then, tree overaging has resulted in stand stagnation displayed by slow stem growth, branch dieback, and scarce acorn production. The urgent need to find new alternative uses for abandoned coppices is recognized as one of the biggest challenges which currently faces Mediterranean silviculture; conversion into high forest by thinning is one of the preferred alternatives. For this aim, thinning has been broadly applied and seldom tested, although without a comprehensive understanding of the causes of stand stagnation. In this PhD study, we test the hypothesis of an imbalance between above- and below-ground organs, result of long term coppicing, as the underlying cause of Q. pyrenaica decay. In an experimental plot coppiced since at least the 12th century, genetic analyses were performed a priori to elucidate inconspicuous clonal structure of Q. pyrenaica to evaluate how clonal size affects the functioning of these multi-stemmed trees. Clonal size negatively affected diametric stem growth, whereas root respiration rates, measured by internal fluxes of CO2 through xylem (FT) and soil CO2 efflux, increased with clonal size. These results suggest root-to-shoot (R:S) imbalance intensifying with clonal size: periodic removal of aboveground organs whilst belowground organs remain undisturbed may have led to massive root systems which consume a great proportion of non-structural carbohydrates (NSC) for maintenance respiration, thus constraining aboveground performance. Furthermore, excavation of two multi-stemmed trees, composed by four and eight stems, revealed R:S ratios (0.5 and 1, respectively) greater than those reported for sexually regenerated trees. Moreover, as similarly observed in several root-resprouting species, NSC allocation to roots was favored ([NSC] > 20% in spring): a large proportion of sapwood maintained throughout the root system (52%) stored a remarkable NSC pool of 87 kg in the case of the largest clone. In this root system of the eight-stemmed tree, 248 root connections were counted and, by radiocarbon dating, its age was estimated to be 550-years-old. Persistence of massive, old and highly interconnected root systems suggests that enhanced belowground NSC storage and consumption reflects a trade-off between vegetative resilience and aboveground development. For a better understanding of tree carbon budget and the potential role of carbon starvation in Q. pyrenaica decay, internal and external stem CO2 fluxes and soil CO2 effluxes were monitored to evaluate respiratory costs above- and below-ground. On a seasonal scale, stem and root respiration (RS and RR) mirrored sap flow and stem growth dynamics. Respiration was determined to the greatest extent by external fluxes of CO2 to the atmosphere or soil, since FT accounted for a low proportion of RS and RR (< 10% and < 2%, respectively). On a diel scale, the contribution of FT to RS increased up to 25% at high transpiration rates. Comparatively low FT was determined by the low concentration of xylem CO2 registered ([CO2] as low as 0.11%), likely as a consequence of constrained xylem respiration and reduced resistance to CO2 radial diffusion imposed by summer drought. Xylem [CO2] pulses following first autumn rains support this idea. Averaged over the growing season, soil CO2 efflux was the greatest respiratory flux (39 mol CO2 day-1), three and four times greater than RS (12 mol CO2 day-1) and RR (8-9 mol CO2 day-1), respectively. Ratios of RR/RS below one evidence an additional and important weight of aboveground respiration as a tree carbon sink. Finally, root trenching and stem girdling were tested as complimentary treatments to thinning as a means to improve carbon reserves in stems of clonal trees. Preliminary results discouraged root trenching due to the high cost likely incurred for wound closure. Stem girdling successfully blocked NSC translocation downward, increasing starch concentrations above the girdled zone whilst the root system is fed by non-girdled stems within the clone. Further measurements and ancillary data are necessary to verify that this positive effect hold over time. To conclude, the need of multidisciplinary approaches for an integrative understanding on the functioning of abandoned Q pyrenaica coppices is highlighted for an appropriate management of these stands.

Engineering Computational Emotion - A Reference Model for Emotion in Artificial Systems

Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.

Lo intermedio como lugar : lo intersticial, lo fronterizo y lo impreciso en la arquitectura contemporánea

1. Nuestra investigación se centra en el estudio de los “ámbitos o espacios intermedios” en momentos de la arquitectura contemporánea, en un período de transición entre finales de los años 80 y nuestros días. Pretendemos analizar cómo se presenta el ámbito intermedio en el objeto o lugar arquitectónico y su función o relación con el entorno cercano, desde el proyecto hasta su repercusión en la experiencia vivida. 2. El concepto de intermedio entendido como ámbito o espacio intersticial, fronterizo y ambivalente (o multivalente), atraviesa en la presente investigación el campo de la etimología, de la ciencia, del pensamiento y del arte, para detenerse en la arquitectura actual, llevándose a cabo una indagación concreta en el proceso de concepción, en la propuesta formal, espacial y funcional, así como en la percepción y demás experiencias o vivencias en el lugar arquitectónico. 3. En primer lugar nos proponemos estudiar y explorar el concepto de “intermedio” en sus características, funciones y ubicaciones dentro de la cultura contemporánea, detectando sus antecedentes culturales más importantes, para a continuación aplicarlo reflexivamente a obras significativas de arquitectura. La investigación se enfoca en la modalidad figural (imprecisa) de lo intermedio (en alusión al “figural” deleuziano), cuyas metáforas base son lo translúcido, la penumbra y la espuma, vinculadas al actual paradigma cultural de la complejidad (C. Jencks). A continuación se analizan las relaciones o implicaciones de dicha modalidad figural en obras de arquitectos como Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel y Bos, y Siza, comprobando su valor operativo y poniendo de manifiesto su sentido e importancia en la actualidad y en la disciplina. El estudio tiene como trasfondo el concepto de in-between de la obra de Eisenman, y utiliza conceptos de la filosofía del límite de Trías como algunos de sus principales fundamentos. 4. En cada una de las obras de arquitectura presentadas esta modalidad imprecisa se traduce en un ámbito o espacio intermedio figural específico. Son obras en las que real y virtual, matricial y objetual, arquitectura y territorio, existente y nuevo, colectivo e individual, social e íntimo, interior y exterior, y demás usos y funciones se entrelazan o funden. Son arquitecturas cuya geometría ya no se encuentra tan determinada por aspectos bi o tridimensionales del dibujo o de la construcción. A través de la manipulación de estas geometrías más o menos complejas, dinámicas e intersticiales, estas obras reflejan (o intuyen) las premisas del actual Zeitgeist: un cambio de esquemas de objetos a relaciones basado en un pensamiento más holístico, transdisciplinar, sistémico o complejo (E. Morin), y una nueva conciencia colectiva sobre la realidad que anuncia la crisis de la percepción, el cambio de paradigma y nuevos valores (F. Capra). Emerge otra forma de sentir y percibir el mundo, los lugares y los espacios, que poco a poco está cambiando el modo de pensar y dibujar la arquitectura, y consecuentemente de interaccionar con ella. 5. El sentido del espacio intermedio figural, emerge en las cada vez más complejas cualidades morfológico-espaciales y funcionales de una parte importante de la arquitectura actual. Arquitectura, geometría y tecnología informática están más entrelazadas que nunca, y de un modo más libre, para así poder indagar en nuevas formas de pensar y crear lugares en que los “espacios intermedios” que investigamos son un testimonio. El espacio arquitectónico se vuelve afectivo e interactivo, un lugar intermedio figural, formalizado por espacialidades intersticiales que parecen aludir a lo líquido, donde la forma es más matriz que configuración, el espacio más espacialidad que compartimiento, la función más versátil y multivalente que específica o autónoma, y la perplejidad, la imaginación y la evocación se entrecruzan y vuelven patentes. 6. La arquitectura de los lugares intermedios valora no solamente el “plano”, la “configuración” y la “transparencia”, sino sobre todo el “espacio” y la “relación” en sus interrelaciones con los usuarios y demás contextos. De la identidad a la relacionalidad, de la representación a la presentación, es una arquitectura que propone “otros espacios” que más que espacios son topografías y espacialidades intersticiales, de tensión, transición, transformación, relación, intercambio e interacción. Son lugares intermedios reales y virtuales, que se sirven tanto de la morfología como de la topología para conquistar nuevas espacialidades, pretendiendo salir de la estricta operación de “forming”/”morphing”/formación/”conformación” para explorar la de “spacing”/espaciamiento. Son lugares que se basan en conceptos como la zona de indiscernibilidad de Deleuze, la imagen- flujo de Buci-Glucksmann, la suspensión-entre de Sloterdijk, o el espacio no-objetivo al que se refiere José Gil, plasmándose en la arquitectura contemporánea como tropos de lo intersticial. 7. Son los lugares intermedios de la arquitectura actual, de espacialidad háptica, más “afectiva”, generativa e interactiva, donde ese ámbito intermedio transforma y es transformado, “afecta”, “con-mueve” (nos hace mover/accionar) y evoca otros lugares, otras posibilidades de espacio habitable u ocupable. Emerge lo intermedio como lugar, algo que anuncia y exhibe, de manera paradigmática y manifiesta, el monumento de Eisenman en Berlín. ABSTRACT 1. Our research focuses on the study of “in-between spaces or environments” at particular times in contemporary architecture, in a transition period from the end of the 1980’s through to today. We aim to analyse how in-between environments are presented in the architectural object or place and their function or their relationship with the nearby surroundings, from the project through to the experience had. 2. In this research, the in-between concept, understood as an interstitial, border and ambivalent (or multi-purpose) environment or space, is assessed from the viewpoint of etymology, science, thought and art, to conclude in current architecture, with specific exploration of the conception process, of the formal, spatial and functional proposal, together with the perception and other experiences in the architectural place. 3. Firstly, we aim to study and explore the “in-between” concept as regards its features, functions and locations within contemporary culture, revealing its most important cultural background, to then apply it reflexively to important works of architecture. The research focuses on the figural (imprecise) mode of in-between (in allusion to Deleuze’s “figural” approach) whose base metaphors are the translucent, semi-darkness and foam, linked to the current cultural paradigm of complexity (C. Jenks). We then go on to assess the relationships or implications of said figural mode in architectural works by Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel and Bos, and Siza, verifying their operational worth and revealing their meaning and importance today and in this discipline. The backdrop of the study is the in-between concept of Eisenman’s work and it also uses concepts from the philosophy of the limit of Trías as its main underpinnings. 4. In each of the architectural works presented, this imprecise mode is translated into a specific in-between environment or space. They are works in which real and virtual, matricial and objectual, architecture and territory, existing and new, collective and individual, social and intimate, interior and exterior and other uses and functions all intertwine or blend together. They are architectures the geometry of which is not so much determined by bi- or tri-dimensional aspects of the drawing or construction. Through the manipulation of these more or less complex, dynamic and interstitial geometries, these works reflect (or insinuate) the premises of the current Zeitgeist: A change in the scheme of objects to relationships towards a more holistic, transdisciplinary, systemic or complex thought (E. Morin), and a new collective conscience about the reality which announces the crisis of perception, the change in paradigm and new values (F. Capra). Another way of feeling and perceiving the world, places and spaces, which little by little is changing the way of thinking and drawing architecture and hence of interacting with it. 5. The meaning of figural in-between space emerges in the increasingly complex, morphological-spatial and functional qualities of a large part of architecture today. Architecture, geometry and computer technology are more than ever intertwined in a freer way to inquire into other ways of thinking and making places, where the “in-between” spaces we research are a testimony. Architectural space becomes affective and interactive, a figural in-between place, formed by interstitial spatiality which seems to allude to something liquid, where shape is more matrix than configuration, space more spatiality than compartment, its function more versatile and multi-purpose than specific or autonomous, and perplexity, imagination and evocation criss-cross each other, becoming obvious. 6. The architecture of in-between places values not only “flat”, “configuration” and “transparency”, but above all “space” and the “relationship” in its interrelations with users and other contexts. From identity to relationality, from representation to presentation, it is an architecture that proposes “other spaces”, which more than spaces are topographies and interstitial spatialities, of tension, transition, transformation, relation, exchange and interaction. They are real and virtual in-between places, that take in both morphology and topology to conquer new spatialities, aiming to depart from the strict “forming”/”morphing” operation in order to explore “spacing”. They are places that derive both from Deleuze’s indiscernibility zone concept, from Buci-Glucksmann´s image-flow concept, from Sloterdijk’s suspension-between, and from the non-objective space referred to by José Gil, and they are embodied in contemporary architecture as tropes of the interstitial. 7. They are the in-between places in architecture today, of haptic spatiality, more “affective”, generative and interactive, where that in-between environment transforms and is transformed, “affects”, “moves” (it makes us move/act) and evokes other places, other possibilities of habitable or occupiable space. The in-between emerges as a place, which paradigmatically and declaredly, Eisenman´s monument in Berlin announces and exhibits. RESUMO 1. A investigação centra-se no estudo dos “âmbitos ou espaços intermédios” em momentos da arquitectura contemporânea, no período de transição entre os finais dos anos 80 e os nossos dias. Pretende-se analisar como se apresenta o âmbito intermédio no objecto ou lugar arquitectónico e sua função ou relação com o meio envolvente, desde o projecto até à sua repercussão na experiencia vivenciada. 2. O conceito de intermédio entendido como âmbito ou espaço intersticial, fronteiriço e ambivalente (ou multivalente), atravessa na presente investigação o campo da etimologia, da ciência, do pensamento e da arte, para deter-se na arquitectura actual, realizando-se uma indagação concreta no processo de concepção, na proposta formal, espacial e funcional, assim como na percepção e demais experiencias ou vivencias no lugar arquitectónico. 3. Em primeiro lugar, explora-se o conceito de “intermédio” nas suas características, funções e concretizações na cultura contemporânea, detectando os seus antecedentes culturais mais importantes, para em seguida aplicá-lo reflexivamente a obras significativas de arquitectura. A investigação centra-se na modalidade figural (imprecisa) do intermédio (alusão ao figural deleuziano) cujas metáforas base são o translúcido, a penumbra e a espuma, relacionadas com o actual paradigma da complexidade (C. Jencks). Em seguida analisam-se as relações ou implicações da referida modalidade figural em obras de arquitectos como Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel e Bos, e Siza, como modo de comprovar o seu valor operativo e revelar o seu sentido e importância na actualidade e na disciplina. O estudo tem como referencia o conceito de in-between da obra de Eisenman, e utiliza conceitos da filosofia do limite de Trias como alguns dos seus principais fundamentos. 4. Em cada uma das obras de arquitectura apresentadas esta modalidade imprecisa traduz-se num âmbito ou espaço intermédia figural especifico. São obras nas quais real e virtual, matricial e objectual, arquitectura e território, existente e novo, colectivo e individual, social e intimo, interior e exterior, e outros usos e funções se entrelaçam ou fundem. São arquitecturas cuja geometria já não está tão determinada por aspectos bi ou tridimensionais do desenho ou da construção. Através do uso destas geometrias mais ou menos complexas, dinâmicas e intersticiais, estas obras reflectem (ou intuem) as premissas do actual zeitgeist: uma mudança de esquemas de objectos a relações para um pensamento mais holístico, transdisciplinar, sistémico ou complexo (E. Morin) e uma nova consciência colectiva sobre a realidade, que anuncia a crise da percepção, a mudança de paradigma e novos valores (F. Capra). Emerge uma outra forma de sentir e perceber o mundo, os lugares e os espaços, que gradualmente vai alterando o modo de pensar e desenhar a arquitectura, e consequentemente de interagir com ela. 5. O sentido do espaço intermédio figural, emerge nas cada vez mais complexas qualidades morfológico-espaciais e funcionais de uma parte importante da arquitectura actual. Cada vez mais, arquitectura, geometria e tecnologia informática, relacionam-se de um modo mais livre para indagar outras formas de pensar e fazer lugares, onde os espaços intermédios que investigamos são um testemunho. O espaço arquitectónico torna-se afectivo e interactivo, um lugar intermédio figural, formalizado por espacialidades intersticiais que parecem aludir ao estado liquido, onde a forma é mais matriz que configuração, o espaço mais espacialidade que compartimento, a função mais versátil e multivalente que especifica ou autónoma, e a perplexidade, a imaginação e a evocação entrecruzam-se e tornam-se patentes. 6. A arquitectura dos lugares intermédios valoriza não só o “plano”, a “configuração” e a “transparência”, mas sobretudo o” espaço” e a ”relação” nas suas inter-relações com os utentes e restante contextos. Da identidade à relacionalidade, da representação à apresentação, é uma arquitectura que propõe “outros espaços”, que além de espaços são topografias e espacialidades intersticiais, de tensão, transição, transformação, relação, intercambio e interacção. São lugares intermédios reais e virtuais que utilizam tanto a morfologia como a topologia para conquistar novas espacialidades, pretendendo ultrapassar a estrita operação de “forming”/“morphing”/formação para explorar a de “spacing”/espaçamento. São lugares que se apoiam tanto no conceito de zona de indescernibilidade de Deleuze, como na de imagem-fluxo de Buci-Glucksmann como no de suspensão–entre de Sloterdijk ou de espaço-não objectivo que refere José Gil, e se plasmam na arquitectura contemporânea como tropos do intersticial. 7. São os lugares intermédios da arquitectura actual, de espacialidade háptica, mais “afectiva”, generativa e interactiva, onde esse âmbito intermédio transforma e é transformado, “afecta”, ”co-move “(nos faz mover/agir) e evoca outros lugares, outras possibilidades de espaço habitável ou ocupável. Emerge o intermédio como lugar que, paradigmática e manifestamente, o monumento de Eisenmann em Berlim, anuncia e exibe.

Estudio y diseño de elementos acústicos para proporcionar una acústica variable en una sala multifuncional

El objetivo de este proyecto es profundizar en el estudio y diseño de sistemas relacionados con el acondicionamiento acústico para una sala multifuncional. El proyecto se compone de dos partes. Una parte teórica y una parte práctica dónde se aplican los conceptos teóricos aprendidos. La primera parte, está dividida en capítulos en los que se habla de los siguientes temas: Acústica de salas. Para obtener una acústica adecuada en un recinto destinado a varias funciones, se debe contar con una serie de características que lo definan según su uso, por lo que es necesario conocer el tiempo de reverberación y otros parámetros subjetivos para poder caracterizar ese recinto. Materiales para el acondicionamiento acústico, donde se habla de los materiales absorbentes clasificándolos según las frecuencias a las que actúan y de los distintos tipos de difusores. Métodos para conseguir una acústica variable mediante la utilización de elementos físicos variables, citando casos reales de salas multifuncionales. La segunda parte, consiste en la realización de diseños de elementos de acústica variable para una posible utilización en salas polivalentes reales. La herramienta elegida a la hora de la elaboración de estos diseños es el AutoCad. Con esta herramienta se han realizado estos diseños representados en dos y tres dimensiones. ABSTRACT. The objective of this project is to deepen the study and design of systems related to multifunctional room acoustic conditioning. The project is composed of two parts. A theoretical part and a practical part where the learned theoretical concepts are applied. The first part is divided into chapters in which we talk about the following topics: Acoustics of rooms. To obtain proper acoustics in a room intended for various functions, you must have a number of characteristics that define it according to its use, so it is necessary to know the reverberation time and other subjective parameters to characterize the hall. Materials for acoustic conditioning, where we talk about the absorbent materials classified according to frequencies that those materials act and the different types of diffusers. Methods for obtain a variable acoustic by using variable physical elements, mentioning real cases of multi-purpose rooms. The second part deals with designs execution of variable acoustic elements for a possible use in a real multipurpose room. The chosen tool to develop these designs is the AutoCad. These designs have been made with this tool, represented in two and three dimensions.

Growth data from a field trial of Quercus suber plants regenerated from selected trees and their half-sib progenies by somatic embryogenesis

The development of reliable clonal propagation technologies is a requisite for performing Multi-Varietal Forestry (MVF). Somatic embryogenesis is considered the tissue culture based method more suitable for operational breeding of forest trees. Vegetative propagation is very difficult when tissues are taken from mature donors, making clonal propagation of selected trees almost impossible. We have been able to induce somatic embryogenesis in leaves taken from mature oak trees, including cork oak (Quercus suber). This important species of the Mediterranean ecosystem produces cork regularly, conferring to this species a significant economic value. In a previous paper we reported the establishment of a field trial to compare the growth of plants of somatic origin vs zygotic origin, and somatic plants from mature trees vs somatic plants from juvenile seedlings. For that purpose somatic seedlings were regenerated from five selected cork oak trees and from young plants of their half-sib progenies by somatic embryogenesis. They were planted in the field together with acorn-derived plants of the same families. After the first growth period, seedlings of zygotic origin doubled the height of somatic seedlings, showing somatic plants of adult and juvenile origin similar growth. Here we provide data on height and diameter increases after two additional growth periods. In the second one, growth parameters of zygotic seedlings were also significantly higher than those of somatic ones, but there were not significant differences in height increase between seedlings and somatic plants of mature origin. In the third growth period, height and diameter increases of somatic seedlings cloned from the selected trees did not differ from those of zygotic seedlings, which were still higher than data from plants obtained from somatic embryos from the sexual progeny. Therefore, somatic seedlings from mature origin seem not to be influenced by a possible ageing effect, and plants from somatic embryos tend to minimize the initial advantage of plants from acorns

Toward Multi-Scale Object-Based Data Fusion

This paper proposes a new methodology for object based 2-D data fu- sion, with a multiscale character. This methodology is intended to be use in agriculture, specifically in the characterization of the water status of different crops, so as to have an appropriate water management at a farm-holding scale. As a first approach to its evaluation, vegetation cover vigor data has been integrated with texture data. For this purpose, NDVI maps have been calculated using a multispectral image and Lacunarity maps from the panchromatic image. Preliminary results show this methodology is viable in the integration and management of large volumes of data, which characterize the behavior of agricultural covers at farm-holding scale.

Multi-objective Estimation of Distribution Algorithm Based on Joint Modeling of Objectives and Variables

This paper proposes a new multi-objective estimation of distribution algorithm (EDA) based on joint modeling of objectives and variables. This EDA uses the multi-dimensional Bayesian network as its probabilistic model. In this way it can capture the dependencies between objectives, variables and objectives, as well as the dependencies learnt between variables in other Bayesian network-based EDAs. This model leads to a problem decomposition that helps the proposed algorithm to find better trade-off solutions to the multi-objective problem. In addition to Pareto set approximation, the algorithm is also able to estimate the structure of the multi-objective problem. To apply the algorithm to many-objective problems, the algorithm includes four different ranking methods proposed in the literature for this purpose. The algorithm is applied to the set of walking fish group (WFG) problems, and its optimization performance is compared with an evolutionary algorithm and another multi-objective EDA. The experimental results show that the proposed algorithm performs significantly better on many of the problems and for different objective space dimensions, and achieves comparable results on some compared with the other algorithms.

The CIAO Multi-Dialect Compiler and System: An Experimentation Workbench for Future (C)LP Systems

CIAO is an advanced programming environment supporting Logic and Constraint programming. It offers a simple concurrent kernel on top of which declarative and non-declarative extensions are added via librarles. Librarles are available for supporting the ISOProlog standard, several constraint domains, functional and higher order programming, concurrent and distributed programming, internet programming, and others. The source language allows declaring properties of predicates via assertions, including types and modes. Such properties are checked at compile-time or at run-time. The compiler and system architecture are designed to natively support modular global analysis, with the two objectives of proving properties in assertions and performing program optimizations, including transparently exploiting parallelism in programs. The purpose of this paper is to report on recent progress made in the context of the CIAO system, with special emphasis on the capabilities of the compiler, the techniques used for supporting such capabilities, and the results in the áreas of program analysis and transformation already obtained with the system.

Aplicaciones de interés forestal de las imágenes obtenidas con el sensor Multi-angle Imaging SpectroRadiometer (MISR)

Las aplicaciones de la teledetección al seguimiento de lo que ocurre en la superficie terrestre se han ido multiplicando y afinando con el lanzamiento de nuevos sensores por parte de las diferentes agencias espaciales. La necesidad de tener información actualizada cada poco tiempo y espacialmente homogénea, ha provocado el desarrollo de nuevos programas como el Earth Observing System (EOS) de la National Aeronautics and Space Administration (NASA). Uno de los sensores que incorpora el buque insignia de ese programa, el satélite TERRA, es el Multi-angle Imaging SpectroRadiometer (MISR), diseñado para capturar información multiangular de la superficie terrestre. Ya desde los años 1970, se conocía que la reflectancia de las diversas ocupaciones y usos del suelo variaba en función del ángulo de observación y de iluminación, es decir, que eran anisotrópicas. Tal variación estaba además relacionada con la estructura tridimensional de tales ocupaciones, por lo que se podía aprovechar tal relación para obtener información de esa estructura, más allá de la que pudiera proporcionar la información meramente espectral. El sensor MISR incorpora 9 cámaras a diferentes ángulos para capturar 9 imágenes casi simultáneas del mismo punto, lo que permite estimar con relativa fiabilidad la respuesta anisotrópica de la superficie terrestre. Varios trabajos han demostrado que se pueden estimar variables relacionadas con la estructura de la vegetación con la información que proporciona MISR. En esta Tesis se ha realizado una primera aplicación a la Península Ibérica, para comprobar su utilidad a la hora de estimar variables de interés forestal. En un primer paso se ha analizado la variabilidad temporal que se produce en los datos, debido a los cambios en la geometría de captación, es decir, debido a la posición relativa de sensores y fuente de iluminación, que en este caso es el Sol. Se ha comprobado cómo la anisotropía es mayor desde finales de otoño hasta principios de primavera debido a que la posición del Sol es más cercana al plano de los sensores. También se ha comprobado que los valores máximo y mínimo se van desplazando temporalmente entre el centro y el extremo angular. En la caracterización multiangular de ocupaciones del suelo de CORINE Land Cover que se ha realizado, se puede observar cómo la forma predominante en las imágenes con el Sol más alto es convexa con un máximo en la cámara más cercana a la fuente de iluminación. Sin embargo, cuando el Sol se encuentra mucho más bajo, ese máximo es muy externo. Por otra parte, los datos obtenidos en verano son mucho más variables para cada ocupación que los de noviembre, posiblemente debido al aumento proporcional de las zonas en sombra. Para comprobar si la información multiangular tiene algún efecto en la obtención de imágenes clasificadas según ocupación y usos del suelo, se han realizado una serie de clasificaciones variando la información utilizada, desde sólo multiespectral, a multiangular y multiespectral. Los resultados muestran que, mientras para las clasificaciones más genéricas la información multiangular proporciona los peores resultados, a medida que se amplían el número de clases a obtener tal información mejora a lo obtenido únicamente con información multiespectral. Por otra parte, se ha realizado una estimación de variables cuantitativas como la fracción de cabida cubierta (Fcc) y la altura de la vegetación a partir de información proporcionada por MISR a diferentes resoluciones. En el valle de Alcudia (Ciudad Real) se ha estimado la fracción de cabida cubierta del arbolado para un píxel de 275 m utilizando redes neuronales. Los resultados muestran que utilizar información multiespectral y multiangular puede mejorar casi un 20% las estimaciones realizadas sólo con datos multiespectrales. Además, las relaciones obtenidas llegan al 0,7 de R con errores inferiores a un 10% en Fcc, siendo éstos mucho mejores que los obtenidos con el producto elaborado a partir de datos multiespectrales del sensor Moderate Resolution Imaging Spectroradiometer (MODIS), también a bordo de Terra, para la misma variable. Por último, se ha estimado la fracción de cabida cubierta y la altura efectiva de la vegetación para 700.000 ha de la provincia de Murcia, con una resolución de 1.100 m. Los resultados muestran la relación existente entre los datos espectrales y los multiangulares, obteniéndose coeficientes de Spearman del orden de 0,8 en el caso de la fracción de cabida cubierta de la vegetación, y de 0,4 en el caso de la altura efectiva. Las estimaciones de ambas variables con redes neuronales y diversas combinaciones de datos, arrojan resultados con R superiores a 0,85 para el caso del grado de cubierta vegetal, y 0,6 para la altura efectiva. Los parámetros multiangulares proporcionados en los productos elaborados con MISR a 1.100 m, no obtienen buenos resultados por sí mismos pero producen cierta mejora al incorporarlos a la información espectral. Los errores cuadráticos medios obtenidos son inferiores a 0,016 para la Fcc de la vegetación en tanto por uno, y 0,7 m para la altura efectiva de la misma. Regresiones geográficamente ponderadas muestran además que localmente se pueden obtener mejores resultados aún mejores, especialmente cuando hay una mayor variabilidad espacial de las variables estimadas. En resumen, la utilización de los datos proporcionados por MISR ofrece una prometedora vía de mejora de resultados en la media-baja resolución, tanto para la clasificación de imágenes como para la obtención de variables cuantitativas de la estructura de la vegetación. ABSTRACT Applications of remote sensing for monitoring what is happening on the land surface have been multiplied and refined with the launch of new sensors by different Space Agencies. The need of having up to date and spatially homogeneous data, has led to the development of new programs such as the Earth Observing System (EOS) of the National Aeronautics and Space Administration (NASA). One of the sensors incorporating the flagship of that program, the TERRA satellite, is Multi-angle Imaging Spectroradiometer (MISR), designed to capture the multi-angle information of the Earth's surface. Since the 1970s, it was known that the reflectance of various land covers and land uses varied depending on the viewing and ilumination angles, so they are anisotropic. Such variation was also related to the three dimensional structure of such covers, so that one could take advantage of such a relationship to obtain information from that structure, beyond which spectral information could provide. The MISR sensor incorporates 9 cameras at different angles to capture 9 almost simultaneous images of the same point, allowing relatively reliable estimates of the anisotropic response of the Earth's surface. Several studies have shown that we can estimate variables related to the vegetation structure with the information provided by this sensor, so this thesis has made an initial application to the Iberian Peninsula, to check their usefulness in estimating forest variables of interest. In a first step we analyzed the temporal variability that occurs in the data, due to the changes in the acquisition geometry, i.e. the relative position of sensor and light source, which in this case is the Sun. It has been found that the anisotropy is greater from late fall through early spring due to the Sun's position closer to the plane of the sensors. It was also found that the maximum and minimum values are displaced temporarily between the center and the ends. In characterizing CORINE Land Covers that has been done, one could see how the predominant form in the images with the highest sun is convex with a maximum in the camera closer to the light source. However, when the sun is much lower, the maximum is external. Moreover, the data obtained for each land cover are much more variable in summer that in November, possibly due to the proportional increase in shadow areas. To check whether the information has any effect on multi-angle imaging classification of land cover and land use, a series of classifications have been produced changing the data used, from only multispectrally, to multi-angle and multispectral. The results show that while for the most generic classifications multi-angle information is the worst, as there are extended the number of classes to obtain such information it improves the results. On the other hand, an estimate was made of quantitative variables such as canopy cover and vegetation height using information provided by MISR at different resolutions. In the valley of Alcudia (Ciudad Real), we estimated the canopy cover of trees for a pixel of 275 m by using neural networks. The results showed that using multispectral and multiangle information can improve by almost 20% the estimates that only used multispectral data. Furthermore, the relationships obtained reached an R coefficient of 0.7 with errors below 10% in canopy cover, which is much better result than the one obtained using data from the Moderate Resolution Imaging Spectroradiometer (MODIS), also onboard Terra, for the same variable. Finally we estimated the canopy cover and the effective height of the vegetation for 700,000 hectares in the province of Murcia, with a spatial resolution of 1,100 m. The results show a relationship between the spectral and the multi-angle data, and provide estimates of the canopy cover with a Spearman’s coefficient of 0.8 in the case of the vegetation canopy cover, and 0.4 in the case of the effective height. The estimates of both variables using neural networks and various combinations of data, yield results with an R coefficient greater than 0.85 for the case of the canopy cover, and 0.6 for the effective height. Multi-angle parameters provided in the products made from MISR at 1,100 m pixel size, did not produce good results from themselves but improved the results when included to the spectral information. The mean square errors were less than 0.016 for the canopy cover, and 0.7 m for the effective height. Geographically weighted regressions also showed that locally we can have even better results, especially when there is high spatial variability of estimated variables. In summary, the use of the data provided by MISR offers a promising way of improving remote sensing performance in the low-medium spatial resolution, both for image classification and for the estimation of quantitative variables of the vegetation structure.

Response threshold models, stochastic learning automata and ant colony optimization-based decentralized self-coordination algorithms for heterogeneous multi-tasks distribution in multi-robot systems

In recent decades, there has been an increasing interest in systems comprised of several autonomous mobile robots, and as a result, there has been a substantial amount of development in the eld of Articial Intelligence, especially in Robotics. There are several studies in the literature by some researchers from the scientic community that focus on the creation of intelligent machines and devices capable to imitate the functions and movements of living beings. Multi-Robot Systems (MRS) can often deal with tasks that are dicult, if not impossible, to be accomplished by a single robot. In the context of MRS, one of the main challenges is the need to control, coordinate and synchronize the operation of multiple robots to perform a specic task. This requires the development of new strategies and methods which allow us to obtain the desired system behavior in a formal and concise way. This PhD thesis aims to study the coordination of multi-robot systems, in particular, addresses the problem of the distribution of heterogeneous multi-tasks. The main interest in these systems is to understand how from simple rules inspired by the division of labor in social insects, a group of robots can perform tasks in an organized and coordinated way. We are mainly interested on truly distributed or decentralized solutions in which the robots themselves, autonomously and in an individual manner, select a particular task so that all tasks are optimally distributed. In general, to perform the multi-tasks distribution among a team of robots, they have to synchronize their actions and exchange information. Under this approach we can speak of multi-tasks selection instead of multi-tasks assignment, which means, that the agents or robots select the tasks instead of being assigned a task by a central controller. The key element in these algorithms is the estimation ix of the stimuli and the adaptive update of the thresholds. This means that each robot performs this estimate locally depending on the load or the number of pending tasks to be performed. In addition, it is very interesting the evaluation of the results in function in each approach, comparing the results obtained by the introducing noise in the number of pending loads, with the purpose of simulate the robot's error in estimating the real number of pending tasks. The main contribution of this thesis can be found in the approach based on self-organization and division of labor in social insects. An experimental scenario for the coordination problem among multiple robots, the robustness of the approaches and the generation of dynamic tasks have been presented and discussed. The particular issues studied are: Threshold models: It presents the experiments conducted to test the response threshold model with the objective to analyze the system performance index, for the problem of the distribution of heterogeneous multitasks in multi-robot systems; also has been introduced additive noise in the number of pending loads and has been generated dynamic tasks over time. Learning automata methods: It describes the experiments to test the learning automata-based probabilistic algorithms. The approach was tested to evaluate the system performance index with additive noise and with dynamic tasks generation for the same problem of the distribution of heterogeneous multi-tasks in multi-robot systems. Ant colony optimization: The goal of the experiments presented is to test the ant colony optimization-based deterministic algorithms, to achieve the distribution of heterogeneous multi-tasks in multi-robot systems. In the experiments performed, the system performance index is evaluated by introducing additive noise and dynamic tasks generation over time.

Towards a fuzzy-based multi-classifier selection module for activity recognition applications

Performing activity recognition using the information provided by the different sensors embedded in a smartphone face limitations due to the capabilities of those devices when the computations are carried out in the terminal. In this work a fuzzy inference module is implemented in order to decide which classifier is the most appropriate to be used at a specific moment regarding the application requirements and the device context characterized by its battery level, available memory and CPU load. The set of classifiers that is considered is composed of Decision Tables and Trees that have been trained using different number of sensors and features. In addition, some classifiers perform activity recognition regardless of the on-body device position and others rely on the previous recognition of that position to use a classifier that is trained with measurements gathered with the mobile placed on that specific position. The modules implemented show that an evaluation of the classifiers allows sorting them so the fuzzy inference module can choose periodically the one that best suits the device context and application requirements.