Respuesta fisiológica, productiva y cualitativa del cultivar Syrah (Vitis vinifera L) con diferentes frecuencias de riego y densidad de goteros en suelos arcillosos

La disponibilidad hídrica es uno de los principales factores que determinan el rendimiento del viñedo en muchas regiones vitícolas, por lo que sus consecuencias han sido ampliamente estudiadas. Sin embargo, para una cantidad de agua de riego determinada, otros aspectos como la frecuencia de aplicación, o la combinación entre el caudal de los goteros y la distancia entre los mismos (es decir, el patrón de distribución de agua en el suelo), pueden jugar un papel relevante, pero estos factores han sido poco estudiados. El objetivo de este trabajo ha sido evaluar las implicaciones agronómicas y fisiológicas de dos frecuencias de riego (IrrF, cada 2 y 4 días) y dos patrones de distribución de agua (DisP, goteros de 2 L h-1 separados 0,6 m vs. goteros de 4 L h-1 separados 1,2 m). El experimento se llevó a cabo durante cuatro temporadas consecutivas en un viñedo cv. Syrah con un suelo arcilloso en el centro de España, y los dos factores fueron evaluados bajo dos condiciones de disponibilidad hídrica (Baja: 20% de ETo y Media: 40% de ETo). El efecto de la frecuencia de riego y el patrón de distribución de agua en la respuesta agronómica del cv. Syrah se ha estudiado en el capítulo 1. La frecuencia de riego y el patrón de distribución de agua en el suelo afectaron a algunos aspectos de los componentes de rendimiento y desarrollo vegetativo en las dos condiciones de disponibilidad hídrica, aunque los efectos observados no fueron los mismos todos los años. Los efectos fueron más evidentes para IrrF en condiciones de baja disponibilidad hídrica y para DisP en condiciones de disponibilidad hídrica media. Dos de los cuatro años del experimento, el pasar de frecuencia de riego de 2 días a 4 días causó un incremento medio de rendimiento del 20% para la situación de baja disponibilidad hídrica. La textura del suelo, sin duda ha condicionado los resultados obtenidos en los tratamientos regados con el 20% de la ETo, ya que regar cada dos días implicaba la aplicación de pequeñas cantidades de agua y se formaban bulbos de riego superficiales, probablemente favoreciendo las pérdidas por evaporación. En el capítulo 2, se ha analizado el efecto de la frecuencia de riego y del patrón de distribución de agua en el estado hídrico de la planta y el intercambio gaseoso a nivel de hoja con el fin de explicar las diferencias observadas en la respuesta agronómica. En lo que respecta a la frecuencia de riego, en condiciones de baja disponibilidad hídrica, las plantas regadas cada 4 días (plantas 4d), mostraron mayores tasas de asimilación neta y conductancia estomática que las plantas regadas cada 2 días (plantas 2d), lo que es consistente con la hipótesis de que con la frecuencia de riego de 2 días se produjo una pérdida de eficiencia del uso del agua, probablemente debido a una mayor evaporación como consecuencia del hecho de que el volumen de suelo mojado creado era pequeño y cerca de la superficie. En condiciones de disponibilidad hídrica media, las diferencias en el intercambio gaseoso a nivel de hoja fueron mucho más pequeñas. Al comienzo del verano cada frecuencia de riego se comportó mejor uno de los días de medida, compensando al final del ciclo de riego de 4 días. Sin embargo, a medida que avanzó el verano y el déficit de agua se hizo más alto, las diferencias significativas aparecieron sólo en el 'día 4' del ciclo de riego, cuando las plantas 2d se comportaron mejor que las plantas regadas 4d que llevaban tres días sin regarse. Estas diferencias fisiológicas fueron menores que en condiciones de baja disponibilidad hídrica y al parecer no suficientes para afectar el comportamiento agronómico. En cuanto al patrón de distribución de agua, el efecto fue poco significativo, pero la mayor densidad de goteros tendió a presentar un mayor intercambio gaseoso a nivel de hoja, especialmente a media mañana. El efecto fue más importante para las condiciones de disponibilidad hídrica media. En el capítulo 3, se han comparado las relaciones entre el intercambio gaseoso a nivel de hoja, el estado hídrico y la demanda atmosférica, con el fin de explicar los cambios en la intensidad de la respuesta fisiológica observados en el Capítulo 2. No se han encontrado diferencias en dichas relaciones para el patrón de distribución de agua, por lo que sólo se ha analizado el efecto de la frecuencia de riego. El estudio se ha centrado fundamentalmente en si las plantas mostraron una respuesta fisiológica diferente a los cambios en el estado hídrico y en la demanda atmosférica según el tiempo transcurrido desde el último riego. Las diferencias observadas explican los resultados obtenidos en los capítulos anteriores, y sugieren la existencia de procesos de aclimatación vinculados a la frecuencia de riego y a la disponibilidad hídrica. Las plantas bajo condiciones de baja disponibilidad hídrica se mostraron más aclimatadas al estrés hídrico que aquellas en condiciones de disponibilidad hídrica media. La frecuencia de riego afectó claramente la relación entre los parámetros de intercambio gaseoso a nivel de hoja, el estado hídrico de la planta y las condiciones atmosféricas, y junto con la cantidad de agua aplicada tuvo implicaciones en el desarrollo de mecanismos de aclimatación que afectaron a la respuesta fisiológica de la planta, afectando a la eficiencia del riego. ABSTRACT Water availability is one of the major factors that determine vineyard performance in many grape growing regions, so its implications have been widely studied before. However, for a given irrigation water amount, other aspects such as application frequency, or emitter spacing and flow rate (i.e., distribution pattern), may play a relevant role, but these factors have been scarcely studied. The aim of this work was to evaluate the agronomic and physiological implications of two irrigation frequencies (IrrF, every 2 and 4 days) and two water distribution patterns (DisP, 2 L h−1 emitters every 0.6 m vs. 4 L h−1 emitters every 1.2 m). The experiment was carried out during four consecutive seasons in a cv. Syrah vineyard with a clay soil in central Spain, and the two factors were evaluated under two water availability conditions (LOW WA: 20% of ETo and MEDIUM WA: 40% of ETo). The effect of irrigation frequency and water distribution pattern on the agronomical response of cv. Syrah was studied in Chapter 1. IrrF and DisP affected some aspects of vegetative development and yield components under both water availability conditions, although the effects observed were not the same every year. The effects were more evident for IrrF under low water availability and for DisP under medium water availability. Two out of the four years of the experiment, the change of irrigation frequency from 2 days to 4 days promoted an average yield increase of 20% for the LOW WA situation. Soil texture certainly conditioned the results obtained under LOW WA conditions, since high frequency irrigation implied applying small amounts of water that resulted in limited superficial water bulbs, which probably favored water evaporation. In Chapter 2, the effect of irrigation frequency and water distribution pattern on plant water status and leaf gas exchange was analyzed to explain the differences observed in the agronomical response. Concerning irrigation frequency, under LOW WA conditions, applying irrigation every 4 days, resulted in higher net assimilation rates and stomatal conductance than doing it every 2 days, supporting the hypothesis that the latter frequency resulted in a water use efficiency loss, probably due to higher evaporation as a consequence of the fact the wetted soil volume created was small and close to the surface. Under MEDIUM WA conditions, differences in leaf gas exchange were much smaller. At the beginning of the summer each irrigation frequency behaved better one of the measurements days, compensating at the end of the 4-day irrigation cycle. However, as the summer progressed and water deficit became higher, significant differences appeared only on ‘day 4’ of the irrigation cycle, when 2d plants behaved better than 4d plants. These physiological differences were smaller than under LOW WA conditions and apparently not sufficient to affect agronomical performance. Regarding water distribution pattern, the effect was less significant but the closest emitter spacing resulted in general terms in a higher leaf gas exchange, especially at midmorning. The effect was more noticeable for MEDIUM WA conditions. In Chapter 3, the relationships between leaf gas exchange and leaf water status and atmospheric demand were compared to explain the changes in the intensity of the physiological response observed in Chapter 2. No differences were found in the relationships for water distribution pattern, so only the effect of irrigation frequency was analyzed focusing on whether the plants have a different physiological response to changes in water status and atmospheric demand according to the time elapsed since the last irrigation. Differences observed in the relationships explained the results obtained in the previous chapters, and point at the occurrence of acclimation processes linked to irrigation frequency and to water availability. Plants under LOW WATER AVAILABILITY conditions seemed to be more acclimated to water stress than those under MEDIUM WATER AVAILABILITY conditions. Irrigation frequency clearly affected the relationship between leaf gas exchange parameters, plant water status and atmospheric conditions, and together with the amount of water applied had implications in the development of acclimation mechanisms that affected plant physiological response, thus affecting irrigation efficiency.

Management of irrigation frequency and nitrogen fertilization to mitigate GHG and NO emissions from drip-fertigated crops

Drip irrigation combined with split application of fertilizer nitrogen (N) dissolved in the irrigation water (i.e. drip fertigation) is commonly considered best management practice for water and nutrient efficiency. As a consequence, its use is becoming widespread. Some of the main factors (water-filled pore space, NH4+ and NO3−) regulating the emissions of greenhouse gases (i.e. N2O, CO2 and CH4) and NO from agroecosystems can easily be manipulated by drip fertigation without yield penalties. In this study, we tested management options to reduce these emissions in a field experiment with a melon (Cucumis melo L.) crop. Treatments included drip irrigation frequency (weekly/daily) and type of N fertilizer (urea/calcium nitrate) applied by fertigation. Crop yield, environmental parameters, soil mineral N concentrations and fluxes of N2O, NO, CH4 and CO2 were measured during 85 days. Fertigation with urea instead of calcium nitrate increased N2O and NO emissions by a factor of 2.4 and 2.9, respectively (P < 0.005). Daily irrigation reduced NO emissions by 42% (P < 0.005) but increased CO2 emissions by 21% (P < 0.05) compared with weekly irrigation. We found no relation between irrigation frequency and N2O emissions. Based on yield-scaled Global Warming Potential as well as NO cumulative emissions, we conclude that weekly fertigation with a NO3−-based fertilizer is the best option to combine agronomic productivity with environmental sustainability. Our study shows that adequate management of drip fertigation, while contributing to the attainment of water and food security, may provide an opportunity for climate change mitigation.

On the formation of nitrogen oxides in the combustion processes of hydrogen in air

A research programme is being carried out at the Institute Nacional de Tecnica Aeroespacial of Spain, on several aspects of the formation of nitrogen oxides in continuous flow combustion systems, considering hydrogen and hydrocarbons as fuels. The research programme is fundamentally oriented on the basic aspects of the problem, although it also includes the study of the influence on the formation process of several operational and design variables of the combusters, such as type of fuels, fuel/air ratio, degree of mixing in premixed type flames, existence of droplets as compared with homogeneous combustion.This problem of nitrogen oxides formation is receiving lately great attention, specially in connection with automobile reciprocating engines and aircraft gas turbines. This is due to the fact of the increasing frequency and intensity of photochemical hazes or smog, typical of urban areas submitted to strong solar radiation, which are originated by the action on organic compounds of the oxidants resulting from the photochemical decomposition of nitrogen dioxide N02. In the combustion process almost all nitrogen oxides are in form of NO. This nitric oxide reacts with the oxygen of the air and forms N02, this reaction only taking place in or near the exhaust of tne motors, since the N0-02 reaction becomes frozen for the concentration existing in the atmosphere.

Application and modeling of GaN FET in 1MHz large signal bandwidth power supply for radio frequency power amplifier

In this paper, implementation and testing of non- commercial GaN HEMT in a simple buck converter for envelope amplifier in ET and EER transmission techn iques has been done. Comparing to the prototypes with commercially available EPC1014 and 1015 GaN HEMTs, experimentally demonstrated power supply provided better thermal management and increased the switching frequency up to 25MHz. 64QAM signal with 1MHz of large signal bandw idth and 10.5dB of Peak to Average Power Ratio was gener ated, using the switching frequency of 20MHz. The obtaine defficiency was 38% including the driving circuit an d the total losses breakdown showed that switching power losses in the HEMT are the dominant ones. In addition to this, some basic physical modeling has been done, in order to provide an insight on the correlation between the electrical characteristics of the GaN HEMT and physical design parameters. This is the first step in the optimization of the HEMT design for this particular application.

Processing of ultra-wideband low-frequency signals, for application in Foliage Penetration (FOPEN) Synthetic Aperture Radar (SAR) systems

Foliage Penetration (FOPEN) radar systems were introduced in 1960, and have been constantly improved by several organizations since that time. The use of Synthetic Aperture Radar (SAR) approaches for this application has important advantages, due to the need for high resolution in two dimensions. The design of this type of systems, however, includes some complications that are not present in standard SAR systems. FOPEN SAR systems need to operate with a low central frequency (VHF or UHF bands) in order to be able to penetrate the foliage. High bandwidth is also required to obtain high resolution. Due to the low central frequency, large integration angles are required during SAR image formation, and therefore the Range Migration Algorithm (RMA) is used. This project thesis identifies the three main complications that arise due to these requirements. First, a high fractional bandwidth makes narrowband propagation models no longer valid. Second, the VHF and UHF bands are used by many communications systems. The transmitted signal spectrum needs to be notched to avoid interfering them. Third, those communications systems cause Radio Frequency Interference (RFI) on the received signal. The thesis carries out a thorough analysis of the three problems, their degrading effects and possible solutions to compensate them. The UWB model is applied to the SAR signal, and the degradation induced by it is derived. The result is tested through simulation of both a single pulse stretch processor and the complete RMA image formation. Both methods show that the degradation is negligible, and therefore the UWB propagation effect does not need compensation. A technique is derived to design a notched transmitted signal. Then, its effect on the SAR image formation is evaluated analytically. It is shown that the stretch processor introduces a processing gain that reduces the degrading effects of the notches. The remaining degrading effect after processing gain is assessed through simulation, and an experimental graph of degradation as a function of percentage of nulled frequencies is obtained. The RFI is characterized and its effect on the SAR processor is derived. Once again, a processing gain is found to be introduced by the receiver. As the RFI power can be much higher than that of the desired signal, an algorithm is proposed to remove the RFI from the received signal before RMA processing. This algorithm is a modification of the Chirp Least Squares Algorithm (CLSA) explained in [4], which adapts it to deramped signals. The algorithm is derived analytically and then its performance is evaluated through simulation, showing that it is effective in removing the RFI and reducing the degradation caused by both RFI and notching. Finally, conclusions are drawn as to the importance of each one of the problems in SAR system design.