New electrodynamic tether technology

New Electrodynarnic Tether Technology (NETT) is an experiment we proposed to ESA as part of the Columbus Precursor Flights. It was designed to fly as an exposed payload in the Spacelab carrier. Its primary objective is performance testing for the innovative bare tether concept. The experiment also includes two scientific objectives, specific for uninsulated tethers: i) detection of artificial auroral effects produced by secondary electron emission, and ii) detection of VLF wave emission. Additional objectives of the project are space performance of an electron-emitting hollow cathode and engineering verification of an open-loop deployment strategy.

Motivating Young Students to Start a Career in Nuclear: The Basic Course of Science and Nuclear Technology, An Educational Activity of Spanish Young Generation in Nuclear (JÓVENES NUCLEARES)

The main objective of this course, conducted by Jóvenes Nucleares (Spanish Young Generation in Nuclear, JJNN), a non-profit organization that depends on the Spanish Nuclear Society (SNE) is to pass on basic knowledge about Science and Nuclear Technology to the general public, mostly students and introduce them to its most relevant points. The purposes of this course are to provide general information, to answer the most common questions about Nuclear Energy and to motivate the young students to start a career in nuclear. Therefore, it is directed mainly to high school and university students, but also to general people that wants to learn about the key issues of such an important matter in our society. Anybody could attend the course, as no specific scientific education is required. The course is done at least once a year, during the Annual Meeting of the Spanish Nuclear Society, which takes place in a different Spanish city each time. The course is done also to whichever university or institution that asks for it to JJNN, with the only limit of the presenter´s availability. The course is divided into the following chapters: Physical nuclear and radiation principles, Nuclear power plants, Nuclear safety, Nuclear fuel, Radioactive waste, Decommission of nuclear facilities, Future nuclear power plants, Other uses of nuclear technology, Nuclear energy, climate change and sustainable development. The course is divided into 15 minutes lessons on the above topics, imparted by young professionals, experts in the field that belongs either to the Spanish Young Generation in Nuclear, either to companies and institutions related with nuclear energy. At the end of the course, a 200 pages book with the contents of the course is handed to every member of the audience. This book is also distributed in other course editions at high schools and universities in order to promote the scientific dissemination of the Nuclear Technology. As an extra motivation, JJNN delivers a course certificate to the assistants. At the end of the last edition course, in Santiago de Compostela, the assistants were asked to provide a feedback about it. Some really interesting lessons were learned, that will be very useful to improve next editions of the course. As a general conclusion of the courses it can be said that many of the students that have assisted to the course have increased their motivation in the nuclear field, and hopefully it will help the young talents to choose the nuclear field to develop their careers

The role of a firm's absorptive capacity and the technology transfer process in clusters: How effective are technology centres in low-tech clusters?

This paper analyses how the internal resources of small- and medium-sized enterprises determine access (learning processes) to technology centres (TCs) or industrial research institutes (innovation infrastructure) in traditional low-tech clusters. These interactions basically represent traded (market-based) transactions, which constitute important sources of knowledge in clusters. The paper addresses the role of TCs in low-tech clusters, and uses semi-structured interviews with 80 firms in a manufacturing cluster. The results point out that producer–user interactions are the most frequent; thus, the higher the sector knowledge-intensive base, the more likely the utilization of the available research infrastructure becomes. Conversely, the sectors with less knowledge-intensive structures, i.e. less absorptive capacity (AC), present weak linkages to TCs, as they frequently prefer to interact with suppliers, who act as transceivers of knowledge. Therefore, not all the firms in a cluster can fully exploit the available research infrastructure, and their AC moderates this engagement. In addition, the existence of TCs is not sufficient since the active role of a firm's search strategies to undertake interactions and conduct openness to available sources of knowledge is also needed. The study has implications for policymakers and academia.

Hogar digital para servicios FTTH : dispositivos, tecnologías y QoE

FTTH (fibra hasta el hogar) es actualmente, junto con la banda ancha móvil, la principal evolución tecnológica en Redes y Servicios de Telecomunicaciones. Se prevé que en los próximos años, el despliegue de las redes FTTH se vea incrementado de manera significativa, gracias al interés creciente tanto de Operadores de Telecomunicaciones como de Organismos Gubernamentales. Este despliegue (que en el año 2013 ya se está haciendo realidad) llevará servicios de muy alta velocidad (superiores a 100 Mbps, incluso 1 Gbps) de manera masiva a los hogares, exigiendo nuevos requisitos y prestaciones en la red del hogar de los clientes. Se abre aquí, por tanto, un campo de exploración novedoso, incipiente y de requerimientos cada vez más exigentes. De hecho, sin duda, la red del hogar es uno de los elementos fundamentales para el éxito de las redes y servicios en FTTH. Debido a todo lo anterior, se convierte en una necesidad para el sector de las Telecomunicaciones el encontrar soluciones a los problemas anteriormente mencionados. Con objeto de contribuir al análisis de soluciones, este proyecto se enfoca en dos temas, ambos relacionados con la problemática ya mencionada en la red del hogar:  Prospección e identificación de soluciones tecnológicas avanzadas para la red del hogar. Descrito en capítulos 2, 3 y 4. En ellos se realiza un estudio detallado de la situación actual y tendencias futuras de los dispositivos utilizados en la red del hogar. Este estudio está enfocado en la distribución de señales de muy alto ancho de banda (en torno a los 100 Mbps por segundo) en el hogar.  Diseño y desarrollo de una aplicación que permita determinar la calidad de experiencia de cliente (QoE) de un servicio de televisión IP (IPTV). Descrito en capítulos 5 y 6. Se ha seleccionado este tipo de servicios debido a que son los que requieren mayores prestaciones tanto de la red de transporte como de la red del hogar y, al mismo tiempo, son los más complicados de medir debido a la fuerte componente de subjetividad del usuario final. Una red del hogar correctamente diseñada debe cumplir de manera equilibrada los requisitos demandados tanto por el operador como por el cliente o usuario final del servicio. Los requisitos del operador se centran principalmente en el control de la inversión (CAPEX) y del gasto de mantenimiento de la red del hogar (OPEX). El usuario, por otra parte, requiere sencillez en la instalación y mínimo número de elementos a instalar (cero intrusismo, ausencia de cableado). Para adaptarse a estos requerimientos, existe una serie de dispositivos y tecnologías que buscan encontrar el punto de equilibrio entre necesidades de operadores y de clientes finales. Las soluciones actualmente utilizadas pueden dividirse en soluciones cableadas e inalámbricas. También existen soluciones híbridas. Todas ellas se describen en detalle en los capítulos 3 y 4. Al final del estudio se concluye que, con la tecnología actual, es preferible el uso de soluciones cableadas tipo Ethernet o POF. Es recomendable no usar soluciones PLC de manera extensiva (G.hn puede ser una alternativa a futuro) y, en caso de no requerir cableado, utilizar WiFi 11n con frecuencias de 5 GHz, así como sus evoluciones, WiFi 11ac y 11ad. La aplicación desarrollada, explicada en los capítulos 5 y 6, permite capturar y medir en tiempo real la señal de televisión IP que se entrega al usuario. Esta aplicación estimará, a partir de dichas medidas, la calidad de la señal entregada. Para ello tendrá en cuenta el tipo de descodificador utilizado por el usuario así como la red empleada (red FTTH de Telefónica). Esta aplicación podría ser utilizada en los centros de atención técnica de las operadoras de telecomunicaciones, determinando así la relación existente entre reclamaciones recibidas y calidad de servicio medida por la aplicación. Asimismo, aparte de realizar medidas en tiempo real, la aplicación vuelca las medidas realizadas y alarmas detectadas en ficheros log, facilitando el análisis técnico de los problemas e incidencias registrados por dichos centros técnicos. Igualmente, esta aplicación puede ser utilizada para el proceso de certificación de equipamiento de red del hogar o incluso como herramienta para profundizar en parámetros teóricos y criterios de medida de calidad de servicio en IPTV. ABSTRACT. FTTH (Fiber To The Home) and mobile broadband are currently the main technological trend in the Network and Telecommunications Services area. In the next few years, the deployment of FTTH networks will experiment a significant increase, due to the growing interest of both telecommunications operators and government agencies. This deployment (that is becoming a reality) which will massively carry high-speed services to households (speeds of more than 100 Mbps, even 1 Gbps) will demand new requirements and features in the customer’s home network. It can be found here a new and emerging field of exploration, with increasingly demanding requirements. In fact, the home network is one of the key elements for the success of FTTH network and services. Due to the aforementioned, it is a necessity for the telecommunications industry to find solutions to these problems. In order to contribute into the solution analysis, this project focuses on two subjects, both related to the problems of home networking:  Exploratory research and identification of advanced technology solutions for the home network. Described in chapters 2, 3 and 4. These chapters show a detailed study of the current situation and future trends of the devices used at the home network. It focuses on the distribution of very high bandwidth signals (around 100 Mbps per second) in the customer’s home.  Design and development of an application to evaluate customer’s quality of experience (QoE) of an IP television service (IPTV). Described in chapters 5 and 6. IPTV service has been selected because it requires higher performance both from the transport and the home networks and, at the same time, it is the most difficult to measure due to the strong component of subjectivity of the end user. A correct design of the home network must meet the requirements demanded both by the network operator and the customer (end user of the service). Network operator requirements mainly focus on reduced capital expenditures (CAPEX) and operational expenditures (OPEX). Additionally, the final user requires a simple and easy installation and also the minimum number of items to install (zero intrusion, lack of wiring, etc.). Different devices and technologies seek to find a balance between these two requirements (network operators and final users requirements). Solutions available in the market can be divided into wired and wireless. There are also hybrid solutions. All of them are described thoroughly in the first part of the project. The conclusion at the end of the study recommends the use of wired technologies like Ethernet or POF. Additionally, the use of PLC is not advised (G.hn can be an alternative in the future) and, in the case of not requiring wiring, the use of 11ac and 11ad WiFi is advised. The application developed in the second part of the project allows capturing and measuring the real-time IPTV signal delivered to the user. This application will estimate the delivered signal quality from the captured measurements. For this purpose, it will also consider the type of decoder installed on the customer’s premises and the transport network (Telefonica’s FTTH network). This application could be used at the operator’s technical service centres, determining in this way the relationship between user’s complaints and the quality of service measured. Additionally, this application can write all the measurements and alarms in log files, making easier the technical analysis of problems and impairments recorded by the technical centres. Finally, the application can also be used for the certification process of home networking equipment (i.e. decoders) or even as a tool to deepen theoretical parameters and measuring criteria of quality of service in IPTV.

Advanced data acquisition system implementation for the ITER Neutron Diagnostic use case using EPICS and FlexRIO technology on a PXIe platform

In the framework of the ITER Control Breakdown Structure (CBS), Plant System Instrumentation & Control (I&C) defines the hardware and software required to control one or more plant systems [1]. For diagnostics, most of the complex Plant System I&C are to be delivered by ITER Domestic Agencies (DAs). As an example for the DAs, ITER Organization (IO) has developed several use cases for diagnostics Plant System I&C that fully comply with guidelines presented in the Plant Control Design Handbook (PCDH) [2]. One such use case is for neutron diagnostics, specifically the Fission Chamber (FC), which is responsible for delivering time-resolved measurements of neutron source strength and fusion power to aid in assessing the functional performance of ITER [3]. ITER will deploy four Fission Chamber units, each consisting of three individual FC detectors. Two of these detectors contain Uranium 235 for Neutron detection, while a third "dummy" detector will provide gamma and noise detection. The neutron flux from each MFC is measured by the three methods: . Counting Mode: measures the number of individual pulses and their location in the record. Pulse parameters (threshold and width) are user configurable. . Campbelling Mode (Mean Square Voltage): measures the RMS deviation in signal amplitude from its average value. .Current Mode: integrates the signal amplitude over the measurement period

The Phase Space as a New Representation of the Dynamical Behaviour of Temperature and Enthalpy in a Reefer monitored with a Multidistributed Sensors Network

The study of temperature gradients in cold stores and containers is a critical issue in the food industry for the quality assurance of products during transport, as well as forminimizing losses. The objective of this work is to develop a new methodology of data analysis based on phase space graphs of temperature and enthalpy, collected by means of multidistributed, low cost and autonomous wireless sensors and loggers. A transoceanic refrigerated transport of lemons in a reefer container ship from Montevideo (Uruguay) to Cartagena (Spain) was monitored with a network of 39 semi-passive TurboTag RFID loggers and 13 i-button loggers. Transport included intermodal transit from transoceanic to short shipping vessels and a truck trip. Data analysis is carried out using qualitative phase diagrams computed on the basis of Takens?Ruelle reconstruction of attractors. Fruit stress is quantified in terms of the phase diagram area which characterizes the cyclic behaviour of temperature. Areas within the enthalpy phase diagram computed for the short sea shipping transport were 5 times higher than those computed for the long sea shipping, with coefficients of variation above 100% for both periods. This new methodology for data analysis highlights the significant heterogeneity of thermohygrometric conditions at different locations in the container.

Effects of high hydrostatic pressure on rheological and termal properties of chickpea Cicer arietinum L. flour slurry and heat-induced paste.

Thermorheological changes in high hydrostatic pressure (HHP)-treated chickpea flour (CF) slurries were studied as a function of pressure level (0.1, 150, 300, 400, and 600 MPa) and slurry concentration (1:5, 1:4, 1:3, and 1:2 flour-to-water ratios). HHP-treated slurries were subsequently analyzed for changes in properties produced by heating, under both isothermal and non-isothermal processes. Elasticity (G′) of pressurized slurry increased with pressure applied and concentration. Conversely, heat-induced CF paste gradually transformed from solid-like behavior to liquid-like behavior as a function of moisture content and pressure level. The G′ and enthalpy of the CF paste decreased with increasing pressure level in proportion with the extent of HHP-induced starch gelatinization. At 25 °C and 15 min, HHP treatment at 450 and 600 MPa was sufficient to complete gelatinization of CF slurry at the lowest concentration (1:5), while more concentrated slurries would require higher pressures and temperature during treatment or longer holding times. Industrial relevance Demand for chickpea gel has increased considerably in the health and food industries because of its many beneficial effects. However, its use is affected by its very difficult handling. Judicious application of high hydrostatic pressure (HHP) at appropriate levels, adopted as a pre-processing instrument in combination with heating processes, is presented as an innovative technology to produce a remarkable decrease in thermo-hardening of heat-induced chickpea flour paste, permitting the development of new chickpea-based products with desirable handling properties and sensory attributes.

NGCPV: a new generation of concentrator photovoltaic cells, modules and systems

Starting on June 2011, NGCPV is the first project funded jointly between the European Commission (EC) and the New Energy and Industrial Technology Development Organization (NEDO) of Japan to research on new generation concentration photovoltaics (CPV). The Project, through a collaborative research between seven European and nine Japanese leading research centers in the field of CPV, aims at lowering the cost of the CPVproduced photovoltaic kWh down to 5 ?cents. The main objective of the project is to improve the present concentrator cell, module and system efficiency, as well as developing advanced characterization tools for CPV components and systems. As particular targets, the project aims at achieving a cell efficiency of at least 45% and a CPV module with an efficiency greater than 35%. This paper describes the R&D activities that are being carried out within the NGCPV project and summarizes some of the most relevant results that have already been attained, for instance: the manufacturing of a 44.4% world record efficiency triple junction solar cell (by Sharp Corp.) and the installation of a 50 kWp experimental CPV plant in Spain, which will be used to obtain accurate forecasts of the energy produced at system level.