Influence of coiling on the stress relaxation of prestressing steel wires

The possible deleterious effects of coiling and long time storage of coiled wires on the stress relaxation behaviour of prestressing steel wires has been checked by means of experimental work and a simple analytical model. The results show that if the requirements of Standards are fulfilled (minimum coiling diameters) these effects can be neglected. However, some other factors like previous residual stresses, long time storage or storage at high temperatures, can trigger or emphasize this damage on the material. In the authors? opinion it is recommended to control the final curvature of the wires after uncoiling prior to prestressin, as required in some Standards.

Stress relaxation losses of prestressing steel wires

Prestressed structures are susceptible to relaxation losses which are of significant importance in structural design. After being manufactured, prestressing wires are coiled to make their storage and transportation easier. The possible deleterious effects of this operation on the stress relaxation behavior of prestressing steel wires are usually neglected, though it has been noticed by manufacturers and contractors that when relaxation tests are carried out after a long-time storage, on occasions relaxation losses are higher than those measured a short time after manufacturing. The influence of coiling on the relaxation losses is checked by means of experimental work and confirmed with a simple analytical model. The results show that some factors like initial residual stresses, excessively long-time storage or storage at high temperatures, can trigger or accentuate this damage. However, it is also shown that if the requirements of standards are fulfilled (minimum coiling diameters) these effects can be neglected.

Influence of coiling on the stress relaxation of prestressing steel wires

The possible deleterious effects of coiling and long-term storage of coiled wires on the stress relaxation behaviour of prestressing steel wires has been checked by means of experimental work and a simple analytical model. The results show that if the requirements of standards are fulfilled (minimum coiling diameters), these effects can be neglected. However, some other factors, such as previous residual stresses, long-term storage or storage at high temperatures, can trigger or emphasize this damage to the material. In the authors' opinion, checking the final curvature of the wires after uncoiling prior to prestressing, as required in some standards, is to be recommended.

Influencia de las condiciones de almacenamiento sobre la relajación de aceros de pretensado = Influence of storage conditions on prestressing steel relaxation losses

La pérdida de tensión por relajación en las armaduras activas afecta de forma importante a las estructuras de hormigón pretensado. Por ello se realizan ensayos de relajación de los alambres y cordones de pretensado tras su fabricación. Después, el material es enrollado y almacenado durante periodos que en ocasiones pueden superar el año de duración. Generalmente se desprecia la influencia que estas operaciones posteriores a la fabricación pueden tener sobre el material. Sin embargo, diversos fabricantes y suministradores han constatado experimentalmente que, en ocasiones, el material almacenado durante un periodo prolongado presenta pérdidas de relajación mayores que inmediatamente tras su fabricación. En este trabajo se realizan ensayos de laboratorio para comprobar la influencia que el radio de enrollamiento y el periodo de almacenamiento tienen sobre las pérdidas de relajación. También se propone un modelo analítico que permite predecir de manera razonablemente aproximada el valor del ensayo de relajación sobre un alambre sometido a un enrollamiento prolongado. Este modelo explica la evolución del perfil de tensiones durante el proceso de enrollamiento-almacenamiento-desenrollamiento, así como la influencia de las tensiones residuales

Thermo-Mechanical Treatment Effects on Stress Relaxation and Hydrogen Embrittlement of Cold-Drawn Eutectoid Steels

The effects of the temperature and stretching levels used in the stress-relieving treatment of cold-drawn eutectoid steel wires are evaluated with the aim of improving the stress relaxation behavior and the resistance to hydrogen embrittlement. Five industrial treatments are studied, combining three temperatures (330, 400, and 460 °C) and three stretching levels (38, 50 and 64% of the rupture load). The change of the residual stress produced by the treatments is taken into consideration to account for the results. Surface residual stresses allow us to explain the time to failure in standard hydrogen embrittlement tests

Influence of coiling in stress relaxation of prestressing steel wires

The possible deleterious effects of coiling and long-time storage of coiled wires on the stress relaxation behaviour of prestressing steel wires has been checked by means of experimental work and a simple analytical model. The results show that if the requirements of Standards are fulfilled (minimum coiling diameters) these effects can be neglected. However, some other factors like previous residual stresses, long-time storage or storage at high temperatures, can trigger or emphasise this damage to the material. In the authors’ opinion it is recommendable to control the final curvature of the wires after uncoiling prior to prestressing, as required in some Standards.

X-Ray Diffraction, Calorimetric and Dielectric Relaxation Study of the Amorphous and Smectic States of a Main Chain Liquid Crystalline Polymer

Los polímeros cristales líquidos (LCP) son sistemas complejos que forman mesofases que presentan orden orientacional y polímeros amorfos. Con frecuencia, el estado amorfo isotrópico no puede ser estudiado debido a la rápida formación de mesofases. En este trabajo se ha sintetizado y estudiado un nuevo LCP: poli(trietilenglicol metil p, p '-bibenzoato), PTEMeB. Este polímero presenta una formación de mesofase bastante lenta haciendo posible estudiar de forma independiente tanto los estados amorfo y de cristal líquidos. La estructura y las transiciones de fase del PTEMeB han sido investigados por calorimetría (DSC), con MAXS / WAXS con temperatura variable que emplean radiación de sincrotrón y con difracción de rayos X. Estos estudios han mostrado la existencia de dos transiciones vítreas, relacionadas con las fases amorfa y cristal líquido. Se ha realizado un estudio de relajación dieléctrica en amplios intervalos de temperatura y presión. Se ha encontrado que la transición vítrea dinámica de la fase amorfa es más lenta que la del cristal líquido. El estudio de la relajación ? nos ha permitido seguir la formación isoterma de la mesofase a presión atmosférica. Además, con el estudio el comportamiento dinámico a alta presión se ha encontrado que se produce la formación rápida de la mesofase inducida por cambios bruscos de presión. Liquid crystalline polymers (LCPs) are complex systems that include features of both orientationally ordered mesophases and amorphous polymers. Frequently, the isotropic amorphous state cannot be studied due to the rapid mesophase formation. Here, a new main chain LCP, poly(triethyleneglycol methyl p,p'-bibenzoate), PTEMeB, has been synthesized. It shows a rather slow mesophase formation making possible to study independently both the amorphous and the liquid crystalline states. The structure and phase transitions of PTEMeB have been investigated by calorimetry, variable-temperature MAXS/WAXS employing synchrotron radiation, and X-ray diffraction in oriented fibers. These experiments have pointed out the presence of two glass transitions, related to the amorphous or to the liquid crystal phases. Additionally, the mesophase seems to be a coexistence of orthogonal and tilted smectic phases. A dielectric relaxation study of PTEMeB over broad ranges of temperature and pressure has been performed. The dynamic glass transition turns out to be slower for the amorphous state than for the liquid crystal. Monitoring of the α relaxation has allowed us to follow the isothermal mesophase formation at atmospheric pressure. Additionally, the dynamical behavior at high pressures has pointed out the fast formation of the mesophase induced by sudden pressure changes.

Influence of long-time storage. Stress relaxation losses of prestressing steel wires

Prestressed structures are susceptible to relaxation losses which are of significant importance in structural design. After being manufactured, prestressing wires are coiled to make their storage and transportation easier. The possible deleterious effects of this operation on the stress relaxation behavior of prestressing steel wires are usually neglected, though it has been noticed by manufacturers and contractors that when relaxation tests are carried out after a long-time storage, on occasions relaxation losses are higher than those measured a short time after manufacturing. The influence of coiling on the relaxation losses is checked by means of experimental work and confirmed with a simple analytical model. The results show that some factors like initial residual stresses, excessively long-time storage or storage at high temperatures,can trigger or accentuate this damage. However, it is also shown that if the requirements of standards are fulfilled (minimum coiling diameters) these effects can be neglected.

Influencia de las condiciones de almacenamiento sobre la relajación de aceros de pretensado = Influence of storage conditions on prestressing steel relaxation losses

La pérdida de tensión por relajación en las armaduras activas afecta de forma importante a las estructuras de hormigón pretensado. Por ello se realizan ensayos de relajación de los alambres y cordones de pretensado tras su fabricación. Después, el material es enrollado y almacenado durante periodos que en ocasiones pueden superar el año de duración. Generalmente se desprecia la influencia que estas operaciones posteriores a la fabricación pueden tener sobre el material. Sin embargo, diversos fabricantes y suministradores han constatado experimentalmente que, en ocasiones, el material almacenado durante un periodo prolongado presenta pérdidas de relajación mayores que inmediatamente tras su fabricación. En este trabajo se realizan ensayos de laboratorio para comprobar la influencia que el radio de enrollamiento y el periodo de almacenamiento tienen sobre las pérdidas de relajación. También se propone un modelo analítico que permite predecir de manera razonablemente aproximada el valor del ensayo de relajación sobre un alambre sometido a un enrollamiento prolongado. Este modelo explica la evolución del perfil de tensiones durante el proceso de enrollamiento- almacenamiento-desenrollamiento, así como la influencia de las tensiones residuales.Stress relaxation losses on active reinforcement have significant impact on prestressed concrete structures. This is why relaxation tests are carried out on prestressing steel wires and strands after being manufactured. Then, these materials are coiled and stored for a long-term period, sometimes in excess of one year. The influence of these operations, carried out after manufacturing, is usually neglected. Nevertheless, some manufacturers and contractors have noticed that, sometimes, when relaxation tests are carried out after a long-term storage, the relaxation losses found are higher than those measured immediately after manufacturing. In this work, lab tests are performed to check the influence of the coiling radius and the period of storage on the relaxation test. In addition to this, an analytical model is presented to predict the results of a relaxation

Nonlocal electron heat relaxation in a plasma shock at arbitrary ionization number

A recently obtained nonlocal expression for the electron heat flux valid for arbitrary ionization numbers Z is used to study the structure of a plane shock wave in a fully ionized plasma. Nonlocal effects are only important in the foot of the electronic preheating region, where the electron temperature gradient is the steepest. The results are quantified as a function of a characteristic Knudsen number of that region. This work also generalizes to arbitrary values of Z previous results on plasma shock wave structure.

Análisis de la influencia de la estimulación con vibraciones en la respuesta neuromuscular en competidores de esgrima

La esgrima es un deporte de combate en el que todas las acciones están dirigidas a conseguir el objetivo de la competición, que es el de tocar al contrario sin ser tocado, y para ello los tiradores/as se sirven de todas las herramientas, técnicas, tácticas y de condición física posibles a su alcance. La calidad de las acciones de los esgrimistas en competición dependerá fundamentalmente de dos de los sistemas involucrados en el proceso. Por un lado, la activación del sistema nervioso, y por otro lado la respuesta del sistema muscular. Una de las herramientas utilizadas en los últimos años para estimular el sistema neuromuscular, y que ha reportado en muchas investigaciones resultados positivos, ha sido la plataforma de vibraciones vertical. Por esto, decidimos llevar a cabo un estudio con deportistas de esgrima de competición con un protocolo de exposición aguda a las vibraciones, y medir el efecto producido por esta herramienta sobre el sistema neuromuscular a través del estudio de los cambios experimentados en los tiempos de reacción simple, tiempos de respuesta electiva y tiempos de movimiento, así como los efectos en la eficacia del tocado de esgrima analizados antes y después de recibir el estímulo vibratorio. El estudio se desarrolló con tiradores/as de competición de nivel nacional y pertenecientes al Centro de Tecnificación de la Federación de Esgrima de Castilla y León (n=38; Edad: 22 ±9,08). La muestra estaba compuesta por 12 mujeres y 26 hombres, de categorías, cadetes (13), júnior (12), y absolutos (13). El protocolo elegido fue realizado por cada participante en tres ocasiones, una inicial, otra tras pasar por una carga de estimulación en la plataforma de vibraciones, y una fase final, pasado un tiempo de recuperación de 10 minutos para comprobar el grado de disipación del efecto vibratorio. El estímulo elegido para la estimulación sobre la plataforma de vibraciones fue de una frecuencia de 50 Hz, durante un periodo de 60 segundos y con una amplitud de 4 mm. Los resultados se analizaron en función de las variables dependientes tiempo de reacción, tiempo de respuesta electiva, tiempo de movimiento, y precisión y eficacia. Estos datos se cruzaron con las variables independientes sexo, categoría, nivel deportivo y años de experiencia. El propósito del presente estudio fue el de analizar los efectos producidos por una intervención de estimulación neuromuscular mecánica en fase aguda en un grupo de tiradores/as de esgrima de competición. Los resultados mostraron que la carga de estimulación neuromuscular mecánica (ENM) aplicada en nuestro estudio provocó un discreto efecto en la respuesta neuromuscular de los tiradores participantes en la investigación. Se encontraron efectos significativos provocados por el estímulo vibratorio en las siguientes variables: en el tiempo de reacción simple se registró una mejora del 8,1%, en el tiempo de respuesta electiva a pie parado un 10%, en la precisión a pie parado un 7%, y en la eficacia a pie parado un 18,5%. Igualmente se observaron ligeras diferencias por sexos, encontrando un efecto de mayor tamaño en el grupo femenino. Es necesario resaltar que las características particulares de la muestra parecen haber influido en los resultados encontrados de forma importante. Por último, debemos destacar que el efecto residual producido por la estimulación aplicada en nuestra investigación en algún caso superó los diez minutos, ya que se hallaron efectos positivos de la estimulación neuromuscular mecánica en varios de los registros finales como hemos visto. ABSTRACT Fencing is a combat sport in which all actions are aimed at achieving the objective of the competition, which is that of touching the opponent without being touched and for this the fencers make use of all the tools, techniques, tactics and physical condition possible at their disposal. The quality of the fencers´ actions in competition will depend primarily on two of the systems involved in the process: on the one hand, the activation of the nervous system and, on the other, the response of the muscular system. One of the tools recently used to stimulate the neuromuscular system, and which has produced positive results in many research studies, has been the vertical vibration platform. Therefore, we decided to conduct a study with competition fencers with a protocol of acute exposure to vibration and to measure the effect produced by this tool on the neuromuscular system by means of the study of changes experienced in simple reaction times, the elective response times and movement times, as well as the effects on the efficacy of the fencing touch analyzed before and after receiving the vibratory stimulus. The study was conducted with fencers in national competitions and belonging to the Technification Center of the Fencing Federation of Castilla y León (n = 38), with a mean age of 22 years (SD 9.08). The sample was composed of 12 women and 26 men, by categories cadets (13), juniors (12), and seniors (13). The protocol chosen was performed by each participant on three occasions: an initial one, another after going through a stimulation load on the vibration platform, and a final phase, after a 10 minute recovery time to assess the degree of dissipation of the vibratory effect. The stimulus chosen on the vibration platform was a frequency of 50 Hz, for a period of 60 seconds and an amplitude of 4 mm. The results were analyzed according to the following dependent variables: the reaction time, the response time, the accuracy and the efficiency. This data was crossed with the independent variables: gender, category, sporting level and the years of experience. The purpose of this study was analyze the effects of neuromuscular stimulation intervention in a group of fencing competition shooters. The results showed that the mechanical neuromuscular stimulation (MNS) load applied in our study led to a modest effect on the neuromuscular response of the fencers involved in the research. Significant effects were found caused by the vibratory stimulus on the simple reaction time 8,1%, elective response time 10%, as well as the accuracy 7%, and efficiency 18,5%. We should also point out that slight differences by gender were observed, finding a greater effect in females. It should be emphasized that the specific characteristics of the sample appear to have significantly influenced the results. Finally, we should note that the residual effect produced by the stimulation applied in our research in some cases exceeded ten minutes, given that positive effects of the mechanical neuromuscular stimulation were found in several of the final scores.

Efecto de una exposición aguda a una estimulación neuromuscular mecánica en el tiempo de respuesta electiva a pie parado en tiradores de esgrima

En este trabajo se aplicó un protocolo de exposición aguda a las vibraciones en competidores de esgrima de nivel nacional, para analizar el efecto producido sobre el sistema neuromuscular en el tiempo de respuesta electiva.

Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel

Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel

Thermomechanical relaxation and different water states in cottonseed protein derived bioplastics

Thermomechanical relaxation events and different water states in cottonseed protein bioplastics are presented whilst investigating the effects of aldehyde cross-linking agents. Thermomechanical relaxation of cottonseed protein bioplastics associated with protein denaturation, moisture absorption and broad glass transitions (Tg) were observed from DSC and DMA measurements. It was shown that variation of the aldehyde influences the storage modulus at very low temperature (below Tg). From measurements of the water fusion point, enthalpy, vaporisation, and weight loss, three water states in the water-absorbed bioplastics are suggested; namely strongly-bound-to-polymer, weakly-bound-to-polymer and bulk-like water. The water content and unreacted cross-linking agents are influential factors in controlling formation of the different water states, whilst the selection of different aldehydes was found to be negligible. These results could be valuable for adjusting the thermomechanical relaxations of protein based bioplastics, and tailoring their properties in wet environments.

Lattice pulling effect and strain relaxation in axial (In, Ga)N/GaN nanowire heterostructures grown on GaN-buffered Si(111) substrate

Transmission electron microscopy and spatially resolved electron energy-loss spectroscopy have been applied to investigate the indium distribution and the interface morphology in axial (In,Ga)N/GaN nanowire heterostructures. The ordered axial (In,Ga)N/GaN nanowire heterostructures with an indium concentration up to 80% are grown by molecular beam epitaxy on GaN-buffered Si(111) substrates. We observed a pronounced lattice pulling effect in all the nanowire samples given in a broad transition region at the interface. The lattice pulling effect becomes smaller and the (In,Ga)N/GaN interface width is reduced as the indium concentration is increased in the (In,Ga)N section. The result can be interpreted in terms of the increased plastic strain relaxation via the generation of the misfit dislocations at the interface.