Signwalling: signals derived from arabiopsis cell wall activate specific resistance to pathogens

The cell wall is a dynamic structure that regulates both constitutive and inducible plant defence responses. Different molecules o DAMPs (damage-associated molecular patterns) can be released from plant cell walls upon pathogen infection or wounding and can trigger immune responses. To further characterize the function of cell wall on the regulation of these immune responses, we have performed a biased resistance screening of putative/well-characterized primary/secondary Arabidopsis thaliana cell wall mutants (cwm). In this screening we have identified more than 20 cwm mutants with altered susceptibility/resistance to at least one of the following pathogens: the necrotrophic fungi Plectosphaerella cucumerina, the vascular bacterium Ralstonia solanacearum, the biotrophic oomycete Hyaloperonospora arabidopsidis and the powdery mildew fungus Erisyphe cruciferarum. We found that cell wall extracts from some of these cwm plants contain novel DAMPs that activate immune responses and conferred enhanced resistance to particular pathogens when they were applied to wild-type plants. Using glycomic profiling we have performed an initial characterization of the active carbohydrate structures present in these cwm wall fractions, and we have determined the signalling pathways regulated by thesse fractions. . The data generated with this collection of wall mutants support the existence of specific correlations between cell wall structure/composition, resistance to particular type of pathogens and plant fitness. Remarkably, we have identified specific cwm mutations that uncoupled resistance to pathogens from plant trade-offs, further indicating the plasticity of wall structures in the regulation of plant immune responses.

Tranversal motion and flow structure of fully nonlinear streaks in a laminar boundary layer

Typical streak computations present in the literature correspond to linear streaks or to small amplitude nonlinear streaks computed using DNS or nonlinear PSE. We use the Reduced Navier-Stokes (RNS) equations to compute the streamwise evolution of fully non-linear streaks with high amplitude in a laminar flat plate boundary layer. The RNS formulation provides Reynolds number independent solutions that are asymptotically exact in the limit $Re \gg 1$, it requires much less computational effort than DNS, and it does not have the consistency and convergence problems of the PSE. We present various streak computations to show that the flow configuration changes substantially when the amplitude of the streaks grows and the nonlinear effects come into play. The transversal motion (in the wall normal-streamwise plane) becomes more important and strongly distorts the streamwise velocity profiles, that end up being quite different from those of the linear case. We analyze in detail the resulting flow patterns for the nonlinearly saturated streaks and compare them with available experimental results.

Comportamiento de morteros de cemento con nano adiciones sometidos a ciclos hielo-deshielo.

El objetivo de este trabajo es determinar la influencia de la incorporación de nanoSiO2, nanoAl2O3 así como la mezcla de ambas adiciones, en morteros de cemento cuando son sometidos a ciclos de hielo-deshielo, e interpretar dicho comportamiento a través de los cambios microestructurales. Para ello se fabricaron cuatro morteros de cemento con distintas adiciones. Un mortero de cemento CEM I 52,5R normalizado de acuerdo a la Norma Europea EN 196-1:2005 como control. Otro de igual composición, al que se incorporó un 5% de nano-SiO2 respecto a la cantidad total de cemento, un tercero con un 5% de nano-Al2O3 y un cuarto con un 2,5% de nano-SiO2 y un 2,5% de nano-Al2O3. La relación agua/material cementante de 0,47. Para cada mortero, se fabricaron 4 probetas de 15x15x15 cm con el fin de determinar su resistencia a ciclos de hielodeshielo de acuerdo a la UNE-CEN/TS 12390-9 EX. Además, se caracterizaron microestructuralmente mediante porosimetría por intrusión de mercurio, análisis termogravimétrico y micrografía electrónica. Los resultados de la caracterización microestructural ponen de manifiesto un refinamiento de la matriz porosa, con aumento de la cantidad de geles hidratados. Las imágenes de SEM revelan cambios en la morfología de los productos hidratados de la matriz cementicia, siendo notables tanto en la portlandita como en la ettringita. Los cambios producidos por la adición de nano sílice muestran una gran influencia en la estructura porosa y determinan una mejora muy significativa en el comportamiento de estos morteros bajo ciclos hielo-deshielo. The rise of nanotechnology in the last two decades has been of scientific interest considerable for the construction industry due to the high potential in the use of nano-particles in cementitious materials. These allow a reengineering of existing products and the design of new high-performance materials. In this line there are many works in which we study the effect of additions of nano-particles in mortars and concretes. However, were very few scientific papers in which we study the behavior of these materials under freeze-thaw cycles. The aim of this study was to determine the influence of incorporating nano-SiO2, nano-Al2O3 and the mixture of both additions in cement mortar when subjected to freeze-thaw cycles, and interpret such behavior through microstructural changes.For this purpose four cement mortars have been fabricated with different additions. A cement mortar CEM I 52,5 R normalized according to the European standard EN 196-1:2005 was manufactured as control . Another mortar with a 5% nano-SiO2 in respect to the total amount of cement, other with 5% nano-Al2O3 and for last a mortar with 2.5% of nano-SiO2 and 2.5% of nano-Al2O3. The water/binder ratio was 0.47. For each mortar, four specimens were made of 150x150x150 mm in order to determine its behavior under freeze-thaw cycles according to UNE-CEN/TS EX 12390-9. Furthermore, the mortars were characterized microstructurally by mercury intrusion porosimetry, thermogravimetric analysis and electron micrograph. The microstructural characterization results show a refinement of the porous matrix, with increased amount of hydrated gels. The SEM images show changes in the morphology of the products of the hydrated cement matrix being remarkable both in the portlandite as in the ettringite. The changes produced by the addition of nanosilica show a great influence on the porous structure and determine a significant improvement in the behavior of these mortars under freeze-thaw cycles.

Chemical and structural analysis of Eucalyptus globulus and E. camaldulensis leaf cuticles: a lipidized cell wall region

The plant cuticle has traditionally been conceived as an independent hydrophobic layer that covers the external epidermal cell wall. Due to its complexity, the existing relationship between cuticle chemical composition and ultra-structure remains unclear to date. This study aimed to examine the link between chemical composition and structure of isolated, adaxial leaf cuticles of Eucalyptus camaldulensis and E. globulus by the gradual extraction and identification of lipid constituents (cutin and soluble lipids), coupled to spectroscopic and microscopic analyses. The soluble compounds and cutin monomers identified could not be assigned to a concrete internal cuticle ultra-structure. After cutin depolymerization, a cellulose network resembling the cell wall was observed, with different structural patterns in the regions ascribed to the cuticle proper and cuticular layer, respectively. Our results suggest that the current cuticle model should be revised, stressing the presence and major role of cell wall polysaccharides. It is concluded that the cuticle may be interpreted as a modified cell wall region which contains additional lipids. The major heterogeneity of the plant cuticle makes it difficult to establish a direct link between cuticle chemistry and structure with the existing methodologies.

Dynamic earth pressures against a retaining wall caused by Rayleigh waves

An approximate procedure for studying harmonic soil-structure interaction problems is presented. The presence of Rayleigh waves is considered and the resulting governing equations of the dynamic soil-structure system are solved in the time domain. With this method the transient and steady states of a vibratory motion and also the nonlinear behaviour of the soil can be studied. As an example, the dynamic earth pressure against a rigid retaining wall is investigated. The loads are assumed to be harmonic Rayleigh waves with both static and dynamic surface surcharges. The dependence of the results on the excitation frequency is shown.

The role of the secondary cell wall in plant resistance to pathogens

Plant resistance to pathogens relies on a complex network of constitutive and inducible defensive barriers. The plant cell wall is one of the barriers that pathogens need to overcome to successfully colonize plant tissues. The traditional view of the plant cell wall as a passive barrier has evolved to a concept that considers the wall as a dynamic structure that regulates both constitutive and inducible defense mechanisms, and as a source of signaling molecules that trigger immune responses. The secondary cell walls of plants also represent a carbon-neutral feedstock (lignocellulosic biomass) for the production of biofuels and biomaterials. Therefore, engineering plants with improved secondary cell wall characteristics is an interesting strategy to ease the processing of lignocellulosic biomass in the biorefinery. However, modification of the integrity of the cell wall by impairment of proteins required for its biosynthesis or remodeling may impact the plants resistance to pathogens. This review summarizes our understanding of the role of the plant cell wall in pathogen resistance with a focus on the contribution of lignin to this biological process.

Cuticle Structure in Relation to Chemical Composition: Re-assessing the Prevailing Model

The surface of most aerial plant organs is covered with a cuticle that provides protection against multiple stress factors including dehydration. Interest on the nature of this external layer dates back to the beginning of the 19th century and since then, several studies facilitated a better understanding of cuticular chemical composition and structure. The prevailing undertanding of the cuticle as a lipidic, hydrophobic layer which is independent from the epidermal cell wall underneath stems from the concept developed by Brongniart and von Mohl during the first half of the 19th century. Such early investigations on plant cuticles attempted to link chemical composition and structure with the existing technologies, and have not been directly challenged for decades. Beginning with a historical overview about the development of cuticular studies, this review is aimed at critically assessing the information available on cuticle chemical composition and structure, considering studies performed with cuticles and isolated cuticular chemical components. The concept of the cuticle as a lipid layer independent from the cell wall is subsequently challenged, based on the existing literature, and on new findings pointing toward the cell wall nature of this layer, also providing examples of different leaf cuticle structures. Finally, the need for a re-assessment of the chemical and structural nature of the plant cuticle is highlighted, considering its cell wall nature and variability among organs, species, developmental stages, and biotic and abiotic factors during plant growth.