A waypoint-based mission planner for a farmland coverage with an aerial robot - a precision farming tool

Remote sensing (RS) with aerial robots is becoming more usual in every day time in Precision Agriculture (PA) practices, do to their advantages over conventional methods. Usually, available commercial platforms providing off-the-shelf waypoint navigation are adopted to perform visual surveys over crop fields, with the purpose to acquire specific image samples. The way in which a waypoint list is computed and dispatched to the aerial robot when mapping non empty agricultural workspaces has not been yet discussed. In this paper we propose an offline mission planner approach that computes an efficient coverage path subject to some constraints by decomposing the environment approximately into cells. Therefore, the aim of this work is contributing with a feasible waypoints-based tool to support PA practices

Cross-lingual Linking on the Multilingual Web of Data (position statement)

Recently, the Semantic Web has experienced signi�cant advancements in standards and techniques, as well as in the amount of semantic information available online. Even so, mechanisms are still needed to automatically reconcile semantic information when it is expressed in di�erent natural languages, so that access to Web information across language barriers can be improved. That requires developing techniques for discovering and representing cross-lingual links on the Web of Data. In this paper we explore the different dimensions of such a problem and reflect on possible avenues of research on that topic.

A proposed two-stage two-tether scientific mission at Jupiter

A two-stage mission to place a spacecraft (SC) below the Jovian radiation belts, using a spinning bare tether with plasma contactors at both ends to provide propulsion and power,is proposed. Capture by Lorentz drag on the tether, at the periapsis of a barely hyperbolic equatorial orbit, is followed by a sequence of orbits at near-constant periapsis, drag finally bringing the SC down to a circular orbit below the halo ring. Although increasing both tether heating and bowing, retrograde motion can substantially reduce accumulated dose as compared with prograde motion, at equal tether-to-SC mass ratio. In the second stage,the tether is cut to a segment one order of magnitude smaller, with a single plasma contactor, making the SC to slowly spiral inward over severalmonths while generating large onboard power, which would allow multiple scientific applications, including in situ study of Jovian grains, auroral sounding of upper atmosphere, and space- and time-resolved observations of surface and subsurface.

Time and space partitioning the EagleEye reference mission

We discuss experiences gained by porting a Software Validation Facility (SVF) and a satellite Central Software (CSW) to a platform with support for Time and Space Partitioning (TSP). The SVF and CSW are part of the EagleEye Reference mission of the European Space Agency (ESA). As a reference mission, EagleEye is a perfect candidate to evaluate practical aspects of developing satellite CSW for and on TSP platforms. The specific TSP platform we used consists of a simulate D LEON3 CPU controlled by the XtratuM separation micro-kernel. On top of this, we run five separate partitions. Each partition ru n s its own real-time operating system or Ada run-time kernel, which in turn are running the application software of the CSW. We describe issues related to partitioning; inter-partition communication; scheduling; I/O; and fault-detection, isolation, and recovery (FDIR)

Mission profile based optimization of a wearable power system

A Wearable Power System (WPS) is a portable power source utilized primarily to power the modern soldier’s electronic equipment. Such a system has to satisfy output power demands in the range of 20 W...200 W, specified as a 4-day mission profile and has a weight limit of 4 kg. To meet these demands, an optimization of a WPS, comprising an internal combustion (IC) engine, permanent magnetic three-phase electrical motor/generator, inverter, Li-batteries, DC-DC converters, and controller, is performed in this paper. The mechanical energy extracted from the fuel by IC engine is transferred to the generator that is used to recharge the battery and provide the power to the electrical output load. The main objectives are to select the engine, fuel and battery type, to match the weight of fuel and the number of battery cells, to find the optimal working point of engine and to minimize the system weight. To provide the second output voltage level of 14 VDC, a separate DC-DC converter is connected between the battery and the load, and optimized for the specified mission profile. A prototype of the WPS based on the optimization presented in the paper results in a total system weight of 3.9 kg and fulfils the mission profile.

Electrodynamic tether for scientific mission in low Jovian orbit

An electrodynamic bare tether is shown to allow carrying out scientific observations very close to Jupiter, for exploration of its surface and subsurface, and ionospheric and atmospheric in-situ measurements. Starting at a circular equatorial orbit of radius about 1.3/1.4 times the Jovian radius, continuous propellantless Lorentz drag on a thin-tape tether in the 1-5 km length range would make a spacecraft many times as heavy as the tape slowly spiral in, over a period of many months, while generating power at a load plugged in the tether circuit for powering instruments in science data acquisition and transmission. Lying under the Jovian radiation belts, the tape would avoid the most severe problem facing tethers in Jupiter, which are capable of producing both power and propulsion but, operating slowly, could otherwise accumulate too high a radiation dose . The tether would be made to spin in its orbit to keep taut; how to balance the Lorentz torque is discussed. Constraints on heating and bowing are also discussed, comparing conditions for prograde versus retrograde orbits. The system adapts well to the moderate changes in plasma density and motional electric field through the limited radial range in their steep gradients near Jupiter.

Estudio del Fenómeno Social Media en las grandes corporaciones del sector TIC

Este trabajo trata el estudio de la implementación y desarrollo de las diversas plataformas del social media: redes sociales y del conocimiento, blogs y herramientas colaborativas en el ámbito corporativo de la empresa. El estudio recopila información de consultoras tecnológicas, de artículos y de diversas plataformas social media y se realiza una investigación sobre el tema planteado. Se incluye el análisis de 42 encuestas a profesionales de dos grandes empresas de las telecomunicaciones en España. Estas dos empresas cuentan una con cerca de 28000 empleados y la otra con más 300 empleados en sus filiales españolas. Ambas tienen una importante presencia internacional. Estas dos empresa se diferencian de otras empresas del sector de las telecomunicaciones en que están apostando en la implementación del social media en sus procesos internos. Además se incluye el estudio y análisis de las estadísticas de uso y de una series de encuestas realizadas en el muro de la red social corporativa de una multinacional de las telecomunicaciones durante tres meses. Se presenta una nueva cultura social de empresa innovadora en áreas como la gestión del conocimiento, comunicación interna, formación e innovación. Y se ofrece una visión cuantitativa y de la implantación del social media en los procesos de una empresa. Se desarrolla una exposición donde se detalla el proceso de estudio de las diferentes plataformas social media y áreas de aplicación en la empresa, el estudio de los aspectos legales de su aplicación y uso y la implementación y desarrollo. Asimismo se expone un análisis teórico-práctico del cálculo del retorno de la inversión (ROI) y por último un análisis de la información recopilada en las encuestas y en el estudio estadístico de la red social corporativa. Los datos de las encuestas fueron analizados mediante estadística descriptiva basada en gráficos y tablas de contingencia donde se calculan residuos y porcentajes totales para analizar la dependencia entre el social media, eficiencia, productividad y cuenta de resultados, además del análisis de la aportación del social media a la misión, comunicación interna y gestión del conocimiento en la empresa. También se realizan cálculos de distribuciones Chi-cuadrado para demostrar la dependencia del social media-productividad y del GAP que relaciona la importancia y el nivel de satisfacción del social media. En el análisis teórico-práctico se toman como parámetros los beneficios, costes, flexibilidad y riesgo. Los beneficios van ligados a la productividad, gestión del conocimiento, capital humano y procesos internos. Los costes a las licencias de software, administración, implementación y formación. A partir de estos parámetros se realizó el estudio de un modelo de empresa que representa a una gran empresa de las TIC en España. Los datos para el estudio son estimativos dentro de la realidad, debido a que la intención no es saber estos valores reales sino el estudio teórico-práctico del método y su aplicación para el calculo del ROI. El estudio estadístico del la red social se realizo durante tres meses y se obtuvo el progreso de uso de la red social en eventos tales como: número de participantes activos, mensajes publicados, archivos subidos, grupos activos y tipos y plataformas de acceso. Del estudio de los datos estadísticos de estos eventos se obtuvieron indicadores de participación, actividad y conocimiento de la red social que son útiles par el calculo del ROI. En conclusión, se demuestran las mejoras que ofrece el social media en campos como la comunicación interna, gestión del conocimiento, formación e innovación. Y gracias a estas mejoras el aumento de la productividad y eficiencia del profesional y asimismo un potencial retorno de la inversión (ROI). ABSTRACT. This paper deals with the study of the implementation and development of the different platforms of social media: social networks and knowledge, blogs and collaborative tools in the corporate enterprise level. The study collects information technology consulting, articles and several social media platforms and an investigation into the question raised is performed. Analysis of 42 surveys of professionals from two big companies telecommunications in Spain are included. These two companies have one about 28000 employees and another with more than 300 employees at its Spanish subsidiaries. Both have a strong international presence. These two companies differ from other companies in the telecommunications sector they are betting in the implementation of social media in their internal processes. Furthermore, the study and analysis of usage statistics and a series of surveys on the wall of the corporate social network of a multinational telecommunications is included for three months. A new social culture enterprise is presented innovative in areas such as knowledge management, internal communications, training and innovation. And a quantitative vision into implementation of social media in the processes of a company is offered. They develops an exhibition where shown the process of studying the different social media platforms and application areas in the company, the study of the legal aspects of your application and use and implementation and development. A theoretical and practical analysis also exposed of calculation of return on investment (ROI) and finally an analysis of the information collected in surveys and statistical study of corporate social network. The survey data were analyzed using descriptive statistics based on graphs and contingency tables where waste and total percentages are calculated for analyze the dependence between the social media, efficiency, productivity and income statement, plus analysis of the contribution of social media on the mission, internal communication and knowledge management in the company. Also Calculations of chi-square distributions are conducted to demonstrate the dependence between of productivity and social media and the GAP that relates the importance and satisfaction level in social media. The theoretical and practical analysis parameters are the benefits, costs, flexibility and risk. The benefits are linked to productivity, knowledge management, human capital and internal processes. The costs are linked the software licensing, management, implementation and training. Based on these parameters was performed the study of a business model that represents a large ICT company in Spain. The data for the study are estimates within the reality, because the intention is not to know these real values but the theoretical and practical study and application of the method for calculating the ROI. Statistical analysis of the social network was made during or three months and was obtained the progress of social network use at events such as: number of active participants, messages posted, files uploaded, active groups and types and access platforms. Into study of statistical data of these events were obtained indicators of participation, activity and knowledge of the social network that are useful for calculating the ROI. In conclusion, the improvements offered by the social media in areas such as internal communication, knowledge management, training and innovation are shown. And thanks to these improvements increase the productivity and efficiency of professional and also a potential return on investment (ROI).

A vision based aerial rbot solution for the IARC 2014 by the Technical University of Madrid

The IARC competitions aim at making the state of the art in UAV progress. The 2014 challenge deals mainly with GPS/Laser denied navigation, Robot-Robot interaction and Obstacle avoidance in the setting of a ground robot herding problem. We present in this paper a drone which will take part in this competition. The platform and hardware it is composed of and the software we designed are introduced. This software has three main components: the visual information acquisition, the mapping algorithm and the Aritificial Intelligence mission planner. A statement of the safety measures integrated in the drone and of our efforts to ensure field testing in conditions as close as possible to the challenge?s is also included.

Evaluation of mission planning strategies of a robotic aerial vehicle for the AIRC international competition

The International Aerial Robotics Competition (IARC) is an important event where teams from universities design flying autonomous vehicles to overcome the last challenges in the field. The goal of the Seventh Mission proposed by the IARC is to guide several mobile ground robots to a target area. The scenario is complex and not determinist due to the random behavior of the ground robots movement. The UAV must select efficient strategies to complete the mission. The goal of this work has been evaluating different alternative mission planning strategies of a UAV for this competition. The Mission Planner component is in charge of taking the UAV decisions. Different strategies have been developed and evaluated for the component, achieving a better performance Mission Planner and valuable knowledge about the mission. For this purpose, it was necessary to develop a simulator to evaluate the different strategies. The simulator was built as an improvement of an existing previous version.

Análisis de sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CFD)para el desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Propulsion Module for a space mission Concurrent Design Facility (CDF)

El objetivo de este proyecto es recoger y explicar el conjunto de tareas realizadas durante el proceso de colaboración llevado a cabo en el Instituto de Microgravedad “Ignacio Da Riva” durante el curso académico 2014/2015, las cuales han conformado las prácticas externas cursadas en la titulación de Grado en Ingeniería Aeroespacial, y el Trabajo de Fin de Grado de la misma titulación. En este documento se pretende,además, poner de manifiesto la rigurosidad con la que se trabaja en el ámbito espacial y la importancia de los protocolos y procedimientos para asegurar un resultado adecuado en los trabajos realizados. Una parte importante del proyecto detalla los procesos de monitorización y mantenimiento de la batería del satélite universitario UPMSat-2 cuyo lanzamiento está previsto para el año próximo y el cual será el segundo satélite del mundo en incorporar una batería de Ión-Litio.

Análisis de sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CDF) para desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Orbit Design Module for a space mission Concurrent Design Facility (CDF)

El presente proyecto se ha realizado durante las prácticas curriculares que han tenido lugar en el Instituto Universitario de Microgravedad “Ignacio Da Riva” (IDR/UPM). A lo largo de estas prácticas se han llevado a cabo trabajos en diversos campos, todos relacionados con el UPMSat-2, desde el subsistema de potencia (placas solares y baterías) hasta el desarrollo de módulos para la Sala de Diseño Concurrente (Concurrent Design Facility, CDF). En la realización de las mismas se ha trabajado en equipo, junto con otros dos alumnos. El objetivo del proyecto es recopilar las tareas realizadas, proporcionando el desarrollo teórico necesario para llevar a cabo todas ellas. Al ser un trabajo con varias partes claramente diferenciadas, se ha optado por comenzar con unas páginas dedicadas a las misiones espaciales. A continuación el trabajo se adentra en el subsistema de potencia de un satélite, particularizando para el UPMSat-2. Finalmente, se proporciona la teoría necesaria para el desarrollo del módulo de misión de la CDF del IDR/UPM, software que se ha desarrollado y tiene reservado un espacio al final, en el cual se describe el programa y se realizan comparaciones de los resultados que proporciona frente a casos reales.

Análisis en sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CDF) para desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Orbit Design Module for a space mission Concurrent Design Facility (CDF)

El objetivo de este trabajo de fin de grado es la exposición de los resultados y conclusiones, fruto de las tareas desarrolladas durante las practicas curriculares en el Instituto Universitario de Microgravedad “Ignacio Da Riva” (IDR/UPM) el presente curso académico. La estructura del trabajo se compone de dos bloques diferenciados entre sí: el seguimiento de una batería y el desarrollo de un módulo para una CDF.

Nanosatellites costelation mission: ODEI-C24

Our mission consists in 4 key objectives: Quantify the number of sunspots during the solar maximum, and also characterize their activity and magnetism. Demonstrate the reliability of a mission in LEO orbit, for an effective solar observation. Technology demonstrator: we will take on board an experiment: the PTF (Polymer Filter test in flight ), associated with visible cameras. Investigation of the potential for exploitation of ground space market through the sale of images taken in flight.

Optimum sizing of bare-tape tethers for de-orbiting satellites at end of mission

De-orbiting satellites at end of mission would prevent generation of new space debris. A proposed de-orbit technology involves a bare conductive tape-tether, which uses neither propellant nor power supply while generating power for on-board use during de-orbiting. The present work shows how to select tape dimensions for a generic mission so as to satisfy requirements of very small tether-to-satellite mass ratio mt/MS and probability Nf of tether cut by small debris, while keeping de-orbit time tf short and product tf ×× tether length low to reduce maneuvers in avoiding collisions with large debris. Design is here discussed for particular missions (initial orbit of 720 km altitude and 63° and 92° inclinations, and 3 disparate MS values, 37.5, 375, and 3750 kg), proving it scalable. At mid-inclination and a mass-ratio of a few percent, de-orbit time takes about 2 weeks and Nf is a small fraction of 1%, with tape dimensions ranging from 1 to 6 cm, 10 to 54 μμm, and 2.8 to 8.6 km. Performance drop from middle to high inclination proved moderate: if allowing for twice as large mt/MS, increases are reduced to a factor of 4 in tf and a slight one in Nf, except for multi-ton satellites, somewhat more requiring because efficient orbital-motion-limited electron collection restricts tape-width values, resulting in tape length (slightly) increasing too.

Tether-mission design for multiple flybys of moon Europa

Electrodynamic tape-tethers are shown to allow a cheap, light, fast mission to Jupiter for multiple flybys of moon Europa and close exploration of the Jovian interior. As regards flybys, this mission is similar to the Clipper mission presently considered by NASA, the basic difference (periapsis location) arising from mission-challenge metrics.