Diseño, Implementación y Verificación de un Sensor de Temperatura CMOS de Bajo Coste y Alta Funcionalidad

En este proyecto, se presenta un sensor de temperatura integrado CMOS basado en la medida de una variable secundaria, cuyo valor es dependiente de la temperatura, como es el tiempo de subida que presenta una señal eléctrica en sus flancos de subida. Con el objetivo de reducir coste y potencia consumida, el sensor integrado de temperatura propuesto genera un pulso con un ancho proporcional a la temperatura medida. Este sensor para realizar la medida elimina la necesidad de tener una señal que sirva de referencia. El área ocupada por este modelo de sensor es de 1.8967mm2, siendo éste fabricado en tecnología CMOS de 0.35µm de 4 capas de metal. Gracias a la excelente linealidad que presenta la salida digital del sensor, el error de medida alcanzado es como máximo de ±0.520ºC. La resolución efectiva mostrada en el caso peor es de 0.7ºC, y el consumo de potencia se encuentra por debajo de los 263µW, con una velocidad de realización de medidas que puede llegar a alcanzar las 1.5x10^6 medidas por segundo.

Ionoluminescence as sensor of structural disorder in crystalline SiO2: determination of amorphization threshold by swift heavy ions

Ionoluminescence (IL) has been used in this work as a sensitive tool to probe the microscopic electronic processes and structural changes produced on quartz by the irradiation with swift heavy ions. The IL yields have been measured as a function of irradiation fluence and electronic stopping power. The results are consistent with the assignment of the 2.7 eV (460 nm) band to the recombination of self-trapped excitons at the damaged regions in the irradiated material. Moreover, it was possible to determine the threshold for amorphization by a single ion impact, as 1:7 keV/nm, which agrees well with the results of previous studies.

Degradation in seawater of structural adhesives for hybrid fibre-metal laminated materials

The adhesives used for applications in marine environments are subject to particular chemical conditions, which are mainly characterised by an elevated chlorine ion content and intermittent wetting/drying cycles, among others.These conditions can limit the use of adhesives due to the degradation processes that they experience. In this work, the chemical degradation of two different polymers, polyurethane and vinylester, was studied in natural seawater under immersion for different periods of time.The diffusion coefficients and concentration profiles of water throughout the thickness of the adhesiveswere obtained.Microstructural changes in the polymer due to the action of water were observed by SEM, and the chemical degradation of the polymer was monitored with the Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The degradation of the mechanical properties of the adhesive was determined by creep tests withMixed Cantilever Beam (MCB) specimens at different temperatures. After 180 days of immersion of the specimens, it was concluded that the J-integral value (depending on the strain) implies a loss of stiffness of 51% and a decrease in the failure load of 59% for the adhesive tested.