Customer loyalty plan at Residencia Gómez-Pardo, Universidad Politécnica de Madrid

Accommodation is a first need and one of the most important decisions that university students have to decide taking into account their limited budget. The satisfaction grade of these students is the relevant aspect for the administrators and managers of the university residences, because it allows assuring the viability and sustainability of this kind of accommodation. In a situation of decline in rate of retention of students into the residence, coupled with an environment of economic crisis. Hence, of disposable income reduction, it seems essential to get to know what factors affect the motivation to remain into the university residence more than others when it comes to the final choice. The offer?s increase of different kind of accommodation is another variable to be considered when taking the decision related to the management of this kind of accommodation. Thus, there is the need to know which are the key factors and to obtain information about these variables in order to go deep into the relevance grade with the aim to pursue the strategic objectives, that will allow to improve the relationship with the customer and to respond to his accommodation? needs. This article researches the motivation elements that lead the students to remain in a university residence or to abandon it in exchange or a different accommodation, as per example shared flats or individual apartments. This research work intends to be useful for the university residence?s managers in order to increase its incomes, to raise the satisfaction degree among its residents and to obtain better end results in the management of these properties. The fieldwork conducted in the Residencia Universitaria Gómez Pardo (RUGP), Universidad Politécnica de Madrid (UPM), for four semesters, which means students from 27 different grades (undergraduates) and 81 surveys finished, shows the following conclusions. Not only the relation with the residence?s personnel but also the quality and quantity of the feeding and the availability and quality of the internet service, constitute key factors when it comes to make the decision of remaining or of abandoning the residence when the semester comes to its end.

Med Capital Partners: plan de negocio de una EAFI

Med Capital Partners (MCP en adelante) es un empresa de asesoramiento financiero independiente (EAFI) que ofrecerá servicios de asesoramiento personalizado tanto a clientes particulares como a empresas, complementando su oferta con otros servicios auxiliares, que le permitan brindar a sus clientes una solución integral. MCP ha sido fundada por tres socios con formación y experiencia específica en el ámbito objeto del negocio, pero multidisciplinar para ofrecer un amplio espectro de servicios de calidad tanto en la Región de Murcia, donde va a establecer su sede, como en el resto de territorio nacional. MCP se crea con la firme misión de ofrecer servicios de asesoramiento y consulta financieros para la gestión y planificación patrimonial de calidad, de forma independiente y transparente y con la motivación de ser el médico de cabecera financiero de familias, particulares y empresas de todos los ámbitos, basándonos en arraigados valores entre los que predominan la transparencia, la independencia y la discreción. Una vez analizados los factores externos y haber realizado los planes de marketing, operaciones y financiero, nos encontramos en disposición de determinar que: 1.Existe un gran número de clientes potenciales. 2.Los factores político, social y legal favorecen la creación de este tipo de empresas. 3.Hay pocos competidores establecidos hasta la fecha. 4.No necesita complicadas infraestructuras ni requiere elevados gastos de aprovisionamiento. 5.Desde el año 2, se obtienen resultados positivos. La propuesta de valor de MCP está focalizada en ofrecer un servicio de calidad al menor precio posible, fijando una política de tarifas inferior a la media nacional y a la de nuestros competidores más cercanos, así como un esquema de precios descendentes para aquellos clientes que depositen su confianza en nosotros y renueven su contrato de asesoramiento continuado o contraten un combo de servicios. En términos operativos, el establecimiento de MCP requiere relativamente poco capital inicial, permitiendo ofrecer los primeros dividendos a los socios en un corto espacio temporal y teniendo desde el primer momento, un sueldo que les permita dedicarse plenamente al funcionamiento de MCP. En definitiva, creemos que MCP puede dar respuesta a una gran oportunidad de negocio existente en un sector en alza y en un mercado de arranque en el que hay una gran riqueza y poca cultura de inversión asesorada. ---ABSTRACT---Med Capital Partners (MCP) is an invest services company, which is established according to an EAFI structure. MCP will offer a custom-made service not only to individual clients but also to enterprises, with a wide range of supplementary services, including industrial strategy projects and all kind of financial processes demanded. MCP has been founded by three partners with proved training and specific experience based on the financial field but multitask and different between them, in order to offer various quality services in Región de Murcia, where it is going to be based, and also all around Spain. MCP is built with the firm mission of offering assessment and financial consulting quality services, helping with the patrimonial management and planning, doing it in an independent and transparent way, and always driving by the motivation of being the family doctor of individual and enterprise of sectors. To make it possible, MCP has deep values as excellence, wisdom and discretion. Once we have analyzed external factors and having made marketing, operations and financial plans, we are ready to determinate: 1.There is a big amount of potential customers. 2.Political, social and legal factors favor the formation of this type of business. 3.There are not many established competitors until now. 4.MCP does not need complex infrastructures either raised initial investment. 5.From year 2 and on, MCP is profitable. The value proposition of MCP is to focus on developing quality services with affordable fees, fixing a price policy under any other Spanish EAFI. MCP wants to build processes according to reality, working with reachable expectations and on real times. MCP is committed to the creation of stable, sustainable and consistent structures to adapt themselves to the individual risk profile of the customers, taking care of all of them. MCP wants to build a close relationship with clients and has developed a descending fee policy. MCP establishment does not require high initial resources and it is profitable in a short time, allowing investors to get their first dividends. Summarizing, we can say MCP is the answer of a big business opportunity within a rising and wealth market that only need a little help to emerge.

Plan de negocio FERCATEC

El presente documento se corresponde con el Trabajo Fin de Máster del Máster en Consultoría en Gestión de Empresas de la Universidad Politécnica de Madrid. A lo largo del mismo se realizará el estudio de una empresa especializada en el diseño, fabricación y montaje industrial. La empresa se creó en el año 2010 y aunque sus resultados hasta la fecha son satisfactorios se estudiarán posibles oportunidades de negocio con las que la empresa podrá mejorar su rendimiento. Se buscarán proyectos de larga duración que permitan obtener unos ingresos constantes en el tiempo para asegurar una cifra de negocio mayor. Se explorarán áreas clave en el mercado europeo, como son el mercado de las energías renovables y el mercado automovilístico, en los que la compañía ha desarrollado trabajos previos, permitiéndoles situarse como una empresa con experiencia en el sector. Se realizará un plan de negocio que permita primero conocer la historia y el estado actual de la compañía y definirá cuales son las líneas de actuación que la compañía debería explorar en el futuro, permitiendo a la misma ampliar por un lado la facturación anual consiguiendo aumentar igualmente los beneficios netos. ---ABSTRACT---This document corresponds to the Final Project for the Master in Business Management and Consultancy of the Universidad Politécnica de Madrid. Throughout the text, the study of a company specialised in industrial design, manufacture and assembly will be carried out. The company was founded in 2010 and, although its results so far have been satisfactory, possible alternatives and business opportunities will be studied in order to enhance profitability even more. One of the main objectives will be to pursue long running projects that will allow to keep the company's revenue constant in order to ensure a higher turnover. Key areas in the European market will be exploited, such as the renewable energies market and the automotive market in which the Company has previously developed works, enabling a position of a Company with experience in the sector. A business plan will be carried out, and it will allow us to get acquainted with the company's history and present status and, it will define the lines of action that the company should explore in the future, allowing it to increase, on the one hand, the annual turnover and at the same time to expand the Company's net benefits.

Analysis of the geometric altimetry to support aircraft optimal trajectories within the future 4d trajectory management

Over the past few years, the common practice within air traffic management has been that commercial aircraft fly by following a set of predefined routes to reach their destination. Currently, aircraft operators are requesting more flexibility to fly according to their prefer- ences, in order to achieve their business objectives. Due to this reason, much research effort is being invested in developing different techniques which evaluate aircraft optimal trajectory and traffic synchronisation. Also, the inefficient use of the airspace using barometric altitude overall in the landing and takeoff phases or in Continuous Descent Approach (CDA) trajectories where currently it is necessary introduce the necessary reference setting (QNH or QFE). To solve this problem and to permit a better airspace management born the interest of this research. Where the main goals will be to evaluate the impact, weakness and strength of the use of geometrical altitude instead of the use of barometric altitude. Moreover, this dissertation propose the design a simplified trajectory simulator which is able to predict aircraft trajectories. The model is based on a three degrees of freedom aircraft point mass model that can adapt aircraft performance data from Base of Aircraft Data, and meteorological information. A feature of this trajectory simulator is to support the improvement of the strategic and pre-tactical trajectory planning in the future Air Traffic Management. To this end, the error of the tool (aircraft Trajectory Simulator) is measured by comparing its performance variables with actual flown trajectories obtained from Flight Data Recorder information. The trajectory simulator is validated by analysing the performance of different type of aircraft and considering different routes. A fuel consumption estimation error was identified and a correction is proposed for each type of aircraft model. In the future Air Traffic Management (ATM) system, the trajectory becomes the fundamental element of a new set of operating procedures collectively referred to as Trajectory-Based Operations (TBO). Thus, governmental institutions, academia, and industry have shown a renewed interest for the application of trajectory optimisation techniques in com- mercial aviation. The trajectory optimisation problem can be solved using optimal control methods. In this research we present and discuss the existing methods for solving optimal control problems focusing on direct collocation, which has received recent attention by the scientific community. In particular, two families of collocation methods are analysed, i.e., Hermite-Legendre-Gauss-Lobatto collocation and the pseudospectral collocation. They are first compared based on a benchmark case study: the minimum fuel trajectory problem with fixed arrival time. For the sake of scalability to more realistic problems, the different meth- ods are also tested based on a real Airbus 319 El Cairo-Madrid flight. Results show that pseudospectral collocation, which has shown to be numerically more accurate and computa- tionally much faster, is suitable for the type of problems arising in trajectory optimisation with application to ATM. Fast and accurate optimal trajectory can contribute properly to achieve the new challenges of the future ATM. As atmosphere uncertainties are one of the most important issues in the trajectory plan- ning, the final objective of this dissertation is to have a magnitude order of how different is the fuel consumption under different atmosphere condition. Is important to note that in the strategic phase planning the optimal trajectories are determined by meteorological predictions which differ from the moment of the flight. The optimal trajectories have shown savings of at least 500 [kg] in the majority of the atmosphere condition (different pressure, and temperature at Mean Sea Level, and different lapse rate temperature) with respect to the conventional procedure simulated at the same atmosphere condition.This results show that the implementation of optimal profiles are beneficial under the current Air traffic Management (ATM).

Development of the infrastructure for a multi-agent traffic management system simulation

This document contains detailed description of the design and the implementation of a multi-agent application controlling traffic lights in a city together with a system for simulating traffic and testing. The goal of this thesis is to design and build a simplified intelligent and distributed solution to the problem with the traffic in the big cities following different good practices in order to allow future refining of the model of the real world. The problem of the traffic in the big cities is still a problem that cannot be solved. Not only is the increasing number of cars a reason for the traffic jams, but also the way the traffic is organized. Usually, the intersections with traffic lights are replaced by roundabouts or interchanges to increase the number of cars that can cross the intersection in certain time. But still there are places where the infrastructure cannot be changed and the traffic light semaphores are the only way to control the car flows. In real life, the traffic lights have a predefined plan for change or they receive information from a centralized system when and how they have to change. But what if the traffic lights can cooperate and decide on their own when and how to change? Using this problem, the purpose of the thesis is to explore different agent-based software engineering approaches to design and build a non-conventional distributed system. From the software engineering point of view, the goal of the thesis is to apply the knowledge and use the skills, acquired during the various courses of the master program in Software Engineering, while solving a practical and complex problem such as the traffic in the cities.

Project management in cloud

Este proyecto consiste en la construcción de un prototipo para la gestión de proyectos, destinada a usuarios del entorno profesional. La herramienta pretende servir de soporte a los equipos que realicen un proyecto dotando al usuario con la posibilidad de gestionar los tiempos del proyecto, gestión de requisitos, gestión de recursos, gestión de la documentación, etc. Adicionalmente, este trabajo llevará asociado un plan de negocio para poder estudiar la viabilidad del proyecto, en este plan de negocio se analizará; el entorno externo (competencia); análisis de las debilidades, fortalezas, amenazas y oportunidades; plan de marketing; plan económicofinanciero; análisis de riesgos del proyecto. A grandes rasgos, la herramienta desarrollada se compone de dos bases de datos (una relacional y otra no relacional), un conjunto de módulos que implementan la funcionalidad y una interfaz gráfica que proporciona a los usuarios una forma cómoda de interactuar con el sistema, principalmente ofrecerá las siguientes opciones:  Gestión de proyectos  Gestión de usuarios.  Gestión de recursos  Gestión de tiempos  Cuadro de mando y notificaciones. ---ABSTRACT---This Project consist of the construction of a prototype for Project management, intended for users of the profesional environment. The software aims to support teams conducting a project by providing the user with the ability to manage time, requirements management, resource management, document management, etc. In addition, this work includes a business plan to study the viability of the project. This business plan addresses the following; analysis of the external enviroment; analysis of the strengths, weaknesses, opportunities and threats; marketing plan; economic and financial plan; analysis of project risks. In general terms, the developed tools are composed of two databases (relational and nonrelational), a set of modules that implement the functionality and a web interface that gives users a convenient way to interact with the system. The options that the system offers are:  Project management  User management  Resource management  Time management  Dashboard and notifications

Strengthening and measuring project management competences of engineering students

Since 2010 the Industrial Engineering School at Universidad Politécnica de Madrid (ETSII UPM) has its Plan Study accredited by ABET. Since then a big motivation has been promoted from the management team encouraging teachers to work on the measurement and strengthening of student¿s competences. Generic skills or behavior acquired significant importance in the workplace, particularly in relation to project management. Because of this, and framed within the requirements of the European Higher Education Area (EHEA), the curriculum of the new degrees are being developed under the competence-based learning. This situation leads to the need to have a clear measurement tool skills as a basis for developing them within the curriculum. A group of multidisciplinary teachers have been working together during two years to design measuring instruments valid for engineering students.

A management model for closed-loop supply chains of reusable articles

This PhD dissertation is framed in the emergent fields of Reverse Logistics and ClosedLoop Supply Chain (CLSC) management. This subarea of supply chain management has gained researchers and practitioners' attention over the last 15 years to become a fully recognized subdiscipline of the Operations Management field. More specifically, among all the activities that are included within the CLSC area, the focus of this dissertation is centered in direct reuse aspects. The main contribution of this dissertation to current knowledge is twofold. First, a framework for the so-called reuse CLSC is developed. This conceptual model is grounded in a set of six case studies conducted by the author in real industrial settings. The model has also been contrasted with existing literature and with academic and professional experts on the topic as well. The framework encompasses four building blocks. In the first block, a typology for reusable articles is put forward, distinguishing between Returnable Transport Items (RTI), Reusable Packaging Materials (RPM), and Reusable Products (RP). In the second block, the common characteristics that render reuse CLSC difficult to manage from a logistical standpoint are identified, namely: fleet shrinkage, significant investment and limited visibility. In the third block, the main problems arising in the management of reuse CLSC are analyzed, such as: (1) define fleet size dimension, (2) control cycle time and promote articles rotation, (3) control return rate and prevent shrinkage, (4) define purchase policies for new articles, (5) plan and control reconditioning activities, and (6) balance inventory between depots. Finally, in the fourth block some solutions to those issues are developed. Firstly, problems (2) and (3) are addressed through the comparative analysis of alternative strategies for controlling cycle time and return rate. Secondly, a methodology for calculating the required fleet size is elaborated (problem (1)). This methodology is valid for different configurations of the physical flows in the reuse CLSC. Likewise, some directions are pointed out for further development of a similar method for defining purchase policies for new articles (problem (4)). The second main contribution of this dissertation is embedded in the solutions part (block 4) of the conceptual framework and comprises a two-level decision problem integrating two mixed integer linear programming (MILP) models that have been formulated and solved to optimality using AIMMS as modeling language, CPLEX as solver and Excel spreadsheet for data introduction and output presentation. The results obtained are analyzed in order to measure in a client-supplier system the economic impact of two alternative control strategies (recovery policies) in the context of reuse. In addition, the models support decision-making regarding the selection of the appropriate recovery policy against the characteristics of demand pattern and the structure of the relevant costs in the system. The triangulation of methods used in this thesis has enabled to address the same research topic with different approaches and thus, the robustness of the results obtained is strengthened.

A Provenance Aware Linked Data Application for Trip Management and Organization

We present El Viajero, an application for exploiting, managing and organizing Linked Data in the domain of news and blogs about travelling. El Viajero makes use of several heterogeneous datasets to help users to plan future trips, and relies on the Open Provenance Model for modeling the provenance information of the resources