15 resultados para made in
em Universidad Politécnica de Madrid
Resumo:
Around ten years ago investigation of technical and material construction in Ancient Roma has advanced in favour to obtain positive results. This process has been directed to obtaining some dates based in chemical composition, also action and reaction of materials against meteorological assaults or post depositional displacements. Plenty of these dates should be interpreted as a result of deterioration and damage in concrete material made in one landscape with some kind of meteorological characteristics. Concrete mixture like calcium and gypsum mortars should be analysed in laboratory test programs, and not only with descriptions based in reference books of Strabo, Pliny the Elder or Vitruvius. Roman manufacture was determined by weather condition, landscape, natural resources and of course, economic situation of the owner. In any case we must research the work in every facts of construction. On the one hand, thanks to chemical techniques like X-ray diffraction and Optical microscopy, we could know the granular disposition of mixture. On the other hand if we develop physical and mechanical techniques like compressive strength, capillary absorption on contact or water behaviour, we could know the reactions in binder and aggregates against weather effects. However we must be capable of interpret these results. Last year many analyses developed in archaeological sites in Spain has contributed to obtain different point of view, so has provide new dates to manage one method to continue the investigation of roman mortars. If we developed chemical and physical analysis in roman mortars at the same time, and we are capable to interpret the construction and the resources used, we achieve to understand the process of construction, the date and also the way of restoration in future.
Resumo:
Separating programs into modules is a well-known technique which has proven very useful in program development and maintenance. Starting by introducing a number of possible scenarios, in this paper we study different issues which appear when developing analysis and specialization techniques for modular logic programming. We discuss a number of design alternatives and their consequences for the different scenarios considered and describe where applicable the decisions made in the Ciao system analyzer and specializer. In our discussion we use the module system of Ciao Prolog. This is both for concreteness and because Ciao Prolog is a second-generation Prolog system which has been designed with global analysis and specialization in mind, and which has a strict module system. The aim of this work is not to provide a theoretical basis on modular analysis and specialization, but rather to discuss some interesting practical issues.
Resumo:
Nowadays, Computational Fluid Dynamics (CFD) solvers are widely used within the industry to model fluid flow phenomenons. Several fluid flow model equations have been employed in the last decades to simulate and predict forces acting, for example, on different aircraft configurations. Computational time and accuracy are strongly dependent on the fluid flow model equation and the spatial dimension of the problem considered. While simple models based on perfect flows, like panel methods or potential flow models can be very fast to solve, they usually suffer from a poor accuracy in order to simulate real flows (transonic, viscous). On the other hand, more complex models such as the full Navier- Stokes equations provide high fidelity predictions but at a much higher computational cost. Thus, a good compromise between accuracy and computational time has to be fixed for engineering applications. A discretisation technique widely used within the industry is the so-called Finite Volume approach on unstructured meshes. This technique spatially discretises the flow motion equations onto a set of elements which form a mesh, a discrete representation of the continuous domain. Using this approach, for a given flow model equation, the accuracy and computational time mainly depend on the distribution of nodes forming the mesh. Therefore, a good compromise between accuracy and computational time might be obtained by carefully defining the mesh. However, defining an optimal mesh for complex flows and geometries requires a very high level expertize in fluid mechanics and numerical analysis, and in most cases a simple guess of regions of the computational domain which might affect the most the accuracy is impossible. Thus, it is desirable to have an automatized remeshing tool, which is more flexible with unstructured meshes than its structured counterpart. However, adaptive methods currently in use still have an opened question: how to efficiently drive the adaptation ? Pioneering sensors based on flow features generally suffer from a lack of reliability, so in the last decade more effort has been made in developing numerical error-based sensors, like for instance the adjoint-based adaptation sensors. While very efficient at adapting meshes for a given functional output, the latter method is very expensive as it requires to solve a dual set of equations and computes the sensor on an embedded mesh. Therefore, it would be desirable to develop a more affordable numerical error estimation method. The current work aims at estimating the truncation error, which arises when discretising a partial differential equation. These are the higher order terms neglected in the construction of the numerical scheme. The truncation error provides very useful information as it is strongly related to the flow model equation and its discretisation. On one hand, it is a very reliable measure of the quality of the mesh, therefore very useful in order to drive a mesh adaptation procedure. On the other hand, it is strongly linked to the flow model equation, so that a careful estimation actually gives information on how well a given equation is solved, which may be useful in the context of _ -extrapolation or zonal modelling. The following work is organized as follows: Chap. 1 contains a short review of mesh adaptation techniques as well as numerical error prediction. In the first section, Sec. 1.1, the basic refinement strategies are reviewed and the main contribution to structured and unstructured mesh adaptation are presented. Sec. 1.2 introduces the definitions of errors encountered when solving Computational Fluid Dynamics problems and reviews the most common approaches to predict them. Chap. 2 is devoted to the mathematical formulation of truncation error estimation in the context of finite volume methodology, as well as a complete verification procedure. Several features are studied, such as the influence of grid non-uniformities, non-linearity, boundary conditions and non-converged numerical solutions. This verification part has been submitted and accepted for publication in the Journal of Computational Physics. Chap. 3 presents a mesh adaptation algorithm based on truncation error estimates and compares the results to a feature-based and an adjoint-based sensor (in collaboration with Jorge Ponsín, INTA). Two- and three-dimensional cases relevant for validation in the aeronautical industry are considered. This part has been submitted and accepted in the AIAA Journal. An extension to Reynolds Averaged Navier- Stokes equations is also included, where _ -estimation-based mesh adaptation and _ -extrapolation are applied to viscous wing profiles. The latter has been submitted in the Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. Keywords: mesh adaptation, numerical error prediction, finite volume Hoy en día, la Dinámica de Fluidos Computacional (CFD) es ampliamente utilizada dentro de la industria para obtener información sobre fenómenos fluidos. La Dinámica de Fluidos Computacional considera distintas modelizaciones de las ecuaciones fluidas (Potencial, Euler, Navier-Stokes, etc) para simular y predecir las fuerzas que actúan, por ejemplo, sobre una configuración de aeronave. El tiempo de cálculo y la precisión en la solución depende en gran medida de los modelos utilizados, así como de la dimensión espacial del problema considerado. Mientras que modelos simples basados en flujos perfectos, como modelos de flujos potenciales, se pueden resolver rápidamente, por lo general aducen de una baja precisión a la hora de simular flujos reales (viscosos, transónicos, etc). Por otro lado, modelos más complejos tales como el conjunto de ecuaciones de Navier-Stokes proporcionan predicciones de alta fidelidad, a expensas de un coste computacional mucho más elevado. Por lo tanto, en términos de aplicaciones de ingeniería se debe fijar un buen compromiso entre precisión y tiempo de cálculo. Una técnica de discretización ampliamente utilizada en la industria es el método de los Volúmenes Finitos en mallas no estructuradas. Esta técnica discretiza espacialmente las ecuaciones del movimiento del flujo sobre un conjunto de elementos que forman una malla, una representación discreta del dominio continuo. Utilizando este enfoque, para una ecuación de flujo dado, la precisión y el tiempo computacional dependen principalmente de la distribución de los nodos que forman la malla. Por consiguiente, un buen compromiso entre precisión y tiempo de cálculo se podría obtener definiendo cuidadosamente la malla, concentrando sus elementos en aquellas zonas donde sea estrictamente necesario. Sin embargo, la definición de una malla óptima para corrientes y geometrías complejas requiere un nivel muy alto de experiencia en la mecánica de fluidos y el análisis numérico, así como un conocimiento previo de la solución. Aspecto que en la mayoría de los casos no está disponible. Por tanto, es deseable tener una herramienta que permita adaptar los elementos de malla de forma automática, acorde a la solución fluida (remallado). Esta herramienta es generalmente más flexible en mallas no estructuradas que con su homóloga estructurada. No obstante, los métodos de adaptación actualmente en uso todavía dejan una pregunta abierta: cómo conducir de manera eficiente la adaptación. Sensores pioneros basados en las características del flujo en general, adolecen de una falta de fiabilidad, por lo que en la última década se han realizado grandes esfuerzos en el desarrollo numérico de sensores basados en el error, como por ejemplo los sensores basados en el adjunto. A pesar de ser muy eficientes en la adaptación de mallas para un determinado funcional, este último método resulta muy costoso, pues requiere resolver un doble conjunto de ecuaciones: la solución y su adjunta. Por tanto, es deseable desarrollar un método numérico de estimación de error más asequible. El presente trabajo tiene como objetivo estimar el error local de truncación, que aparece cuando se discretiza una ecuación en derivadas parciales. Estos son los términos de orden superior olvidados en la construcción del esquema numérico. El error de truncación proporciona una información muy útil sobre la solución: es una medida muy fiable de la calidad de la malla, obteniendo información que permite llevar a cabo un procedimiento de adaptación de malla. Está fuertemente relacionado al modelo matemático fluido, de modo que una estimación precisa garantiza la idoneidad de dicho modelo en un campo fluido, lo que puede ser útil en el contexto de modelado zonal. Por último, permite mejorar la precisión de la solución resolviendo un nuevo sistema donde el error local actúa como término fuente (_ -extrapolación). El presenta trabajo se organiza de la siguiente manera: Cap. 1 contiene una breve reseña de las técnicas de adaptación de malla, así como de los métodos de predicción de los errores numéricos. En la primera sección, Sec. 1.1, se examinan las estrategias básicas de refinamiento y se presenta la principal contribución a la adaptación de malla estructurada y no estructurada. Sec 1.2 introduce las definiciones de los errores encontrados en la resolución de problemas de Dinámica Computacional de Fluidos y se examinan los enfoques más comunes para predecirlos. Cap. 2 está dedicado a la formulación matemática de la estimación del error de truncación en el contexto de la metodología de Volúmenes Finitos, así como a un procedimiento de verificación completo. Se estudian varias características que influyen en su estimación: la influencia de la falta de uniformidad de la malla, el efecto de las no linealidades del modelo matemático, diferentes condiciones de contorno y soluciones numéricas no convergidas. Esta parte de verificación ha sido presentada y aceptada para su publicación en el Journal of Computational Physics. Cap. 3 presenta un algoritmo de adaptación de malla basado en la estimación del error de truncación y compara los resultados con sensores de featured-based y adjointbased (en colaboración con Jorge Ponsín del INTA). Se consideran casos en dos y tres dimensiones, relevantes para la validación en la industria aeronáutica. Este trabajo ha sido presentado y aceptado en el AIAA Journal. También se incluye una extensión de estos métodos a las ecuaciones RANS (Reynolds Average Navier- Stokes), en donde adaptación de malla basada en _ y _ -extrapolación son aplicados a perfiles con viscosidad de alas. Este último trabajo se ha presentado en los Actas de la Institución de Ingenieros Mecánicos, Parte G: Journal of Aerospace Engineering. Palabras clave: adaptación de malla, predicción del error numérico, volúmenes finitos
Resumo:
The HiPER project, phase 4a, is evolving. In this study we present the progress made in the field of neutronics and radiological protection for an integrated design of the facility. In the current model, we take into account the optical systems inside the target bay, as well as the remote handling requirements and related infrastructure, together with different shields. The last reference irradiation scenario, consisting of 20 MJ of neutron yields, 5 yields per burst, one burst every week and 30 years of expected lifetime is considered for this study. We have performed a characterization of the dose rates behavior in the facility, both during operation and between bursts. The dose rates are computed for workers, regarding to maintenance and handling, and also for optical systems, regarding to damage. Furthermore, we have performed a waste management assessment of all the components inside the target bay. Results indicate that remote maintenance is mandatory in some areas. The small beam penetrations in the shields are responsible for some high doses in some specific locations. With regards to optics, the residual doses are as high as prompt doses. It is found that the whole target bay may be fully managed as a waste in 30 years by recycling and/or clearance, with no need for burial.
Resumo:
Modelling of entire wind farms in flat and complex terrain using a full 3D Navier–Stokes solver for incompressible flow is presented in this paper. Numerical integration of the governing equations is performed using an implicit pressure correction scheme, where the wind turbines (W/Ts) are modelled as momentum absorbers through their thrust coefficient. The k–ω turbulence model, suitably modified for atmospheric flows, is employed for closure. A correction is introduced to account for the underestimation of the near wake deficit, in which the turbulence time scale is bounded using a general “realizability” constraint for the fluctuating velocities. The second modelling issue that is discussed in this paper is related to the determination of the reference wind speed for the thrust calculation of the machines. Dealing with large wind farms and wind farms in complex terrain, determining the reference wind speed is not obvious when a W/T operates in the wake of another WT and/or in complex terrain. Two alternatives are compared: using the wind speed value at hub height one diameter upstream of the W/T and adopting an induction factor-based concept to overcome the utilization of a wind speed at a certain distance upwind of the rotor. Application is made in two wind farms, a five-machine one located in flat terrain and a 43-machine one located in complex terrain.
Resumo:
Nitrate leaching decreases crop available N and increases water contamination. Replacing fallow by cover crops (CC) is an alternative to reduce nitrate contamination, because it reduces overall drainage and soil mineral N accumulation. A study of the soil N and nitrate leaching was conducted during 5 years in a semi-arid irrigated agricultural area of Central Spain. Three treatments were studied during the intercropping period of maize (Zea mays L.): barley (Hordeum vulgare L.), vetch (Vicia villosa L.), and fallow. Cover crops, sown in October, were killed by glyphosate application in March, allowing direct seeding of maize in April. All treatments were irrigated and fertilised following the same procedure. Soil water content was measured using capacity probes. Soil Nmin accumulation was determined along the soil profile before sowing and after harvesting maize. Soil analysis was conducted at six depths every 0.20m in each plot in samples from 0 to 1.2-m depth. The mechanistic water balance model WAVE was applied in order to calculate drainage and plant growth of the different treatments, and apply them to the N balance. We evaluated the water balance of this model using the daily soil water content measurements of this field trial. A new Matlab version of the model was evaluated as well. In this new version improvements were made in the solute transport module and crop module. In addition, this new version is more compatible with external modules for data processing, inverse calibration and uncertainty analysis than the previous Fortran version. The model showed that drainage during the irrigated period was minimized in all treatments, because irrigation water was adjusted to crop needs, leading to nitrate accumulation on the upper layers after maize harvest. Then, during the intercrop period, most of the nitrate leaching occurred. Cover crops usually led to a shorter drainage period, lower drainage water amount and lower nitrate leaching than the treatment with fallow. These effects resulted in larger nitrate accumulation in the upper layers of the soil after CC treatments.
Resumo:
Scaling is becoming an increasingly important topic in the earth and environmental sciences as researchers attempt to understand complex natural systems through the lens of an ever-increasing set of methods and scales. The guest editors introduce the papers in this issue’s special section and present an overview of some of the work being done. Scaling remains one of the most challenging topics in earth and environmental sciences, forming a basis for our understanding of process development across the multiple scales that make up the subsurface environment. Tremendous progress has been made in discovery, explanation, and applications of scaling. And yet much more needs to be done and is being done as part of the modern quest to quantify, analyze, and manage the complexity of natural systems. Understanding and succinct representation of scaling properties can unveil underlying relationships between system structure and response functions, improve parameterization of natural variability and heterogeneity, and help us address societal needs by effectively merging knowledge acquired at different scales.
Resumo:
A stress phase space is proposed to compare the static packings of a granular system (microstates) that are compatible to a macrostate described by external stresses. The equivalent stress of each particle of a static packing can be obtained from the mechanical interaction forces, and the associated volume is given by the respective Voronoi cell. Therefore, particles can be located at different stress levels and grouped into categories or configurations, which are defined in base of the geometrical features of the local arrangement (in particular, of the number of forces that keep them force-balanced). They can be represented as points in a stress phase space. The nature of this space is analyzed in detail. The integration limits of the stress variables that avoid or limit tensile states and the capability of each configuration to represent specific stress states establish its main features. Furthermore, if some stress variables are used, instead of the usual components of the Cauchy stress tensor, then some symmetries can be found. Results obtained from molecular dynamics simulations are used to check this nature. Finally, some statistical ensembles are written in terms of the coordinates of this phase space. These require some assumptions that are made in base on continuum mechanics principles.
Resumo:
One of the challenges facing the current web is the efficient use of all the available information. The Web 2.0 phenomenon has favored the creation of contents by average users, and thus the amount of information that can be found for diverse topics has grown exponentially in the last years. Initiatives such as linked data are helping to build the Semantic Web, in which a set of standards are proposed for the exchange of data among heterogeneous systems. However, these standards are sometimes not used, and there are still plenty of websites that require naive techniques to discover their contents and services. This paper proposes an integrated framework for content and service discovery and extraction. The framework is divided into several layers where the discovery of contents and services is made in a representational stateless transfer system such as the web. It employs several web mining techniques as well as feature-oriented modeling for the discovery of cross-cutting features in web resources. The framework is used in a scenario of electronic newspapers. An intelligent agent crawls the web for related news, and uses services and visits links automatically according to its goal. This scenario illustrates how the discovery is made at different levels and how the use of semantics helps implement an agent that performs high-level tasks.
Resumo:
Fuel poverty can be defined as “the inability to afford adequate warmth in the home" and it is the result of the combination of three items: low household income, housing lack of energy efficiency and high energy bills. Although it affects a growing number of households within the European Union only some countries have an official definition for it. In 2013, the European Parliament claimed the Commission and Estate Members to develop different policies in order to fight household energy vulnerability. The importance of tackling fuel poverty is based on the critical consequences it has for human health living below certain temperatures. In Spain some advances have been made in this field but main existing studies remain at the statistical level and do not deepen the understanding of the problem from the perspective of dwelling indoor habitability conditions. What is more, this concept is yet to be officially defined. This paper presents the evaluation of fuel poverty in a building block of social housing located in the centre of Zaragoza and how this issue determined the strategies implemented in the energy retrofitting intervention project. At a first step, fuel poverty was appraised through the exploration of indoor thermal conditions. The adaptive thermal comfort (UNE-EN 15251:2008) method was used to establish the appropriate indoor temperatures and consequently to determine what can be called 'comfort gap'. Results were collated and verified with energy bills collection and a survey work that gathered data from neighbours. All this permitted pointing out those households more in need. Results from the social analysis combined with the evaluation of the building thermal performance determined the intervention. The renovation project was aimed at the implementation of passive strategies that improve households thermal comfort in order to alleviate households fuel poverty situation. This research is part of the project NewSolutions4OldHousing (LIFE10 ENV/ES/439) cofounded by the European Commission under the LIFE+ Programme.
Resumo:
This article shows how a very small company has tailored Scrum according to its own needs. The main additions made were the “sprint design” phase and the “sprint test” phase. Before the sprint 0, the requirements elicitation and the functional specification were made in order to meet deadlines and costs agreed with clients. Besides, the introduction of an agile project management tool has supported all the process and it is considered the main success factor for the institutionalization of the Scrum process.
Resumo:
This paper presents the impact of non-homogeneous deposits of dust on the performance of a PV array. The observations have been made in a 2-MW PV park in the southeast region of Spain. The results are that inhomogeneous dust leads to more significant consequences than the mere short-circuit current reduction resulting from transmittance losses. In particular, when the affected PV modules are part of a string together with other cleaned (or less dusty) ones, operation voltage losses arise. These voltage losses can be several times larger than the short-circuit ones, leading to power losses that can be much larger than what measurements suggest when the PV modules are considered separately. Significant hot-spot phenomena can also arise leading to cells exhibiting temperature differences of more than 20 degrees and thus representing a threat to the PV modules' lifetime.
Resumo:
Las personas que usan la silla de ruedas como su forma de movilidad prioritaria presentan una elevada incidencia (73%) de dolor de hombro debido al sobreuso y al movimiento repetitivo de la propulsión. Existen numerosos métodos de diagnóstico para la detección de las patologías del hombro, sin embargo la literatura reclama la necesidad de un test no invasivo y fiable, y sugiere la termografía como una técnica adecuada para evaluar el dolor articular. La termografía infrarroja (IRT) proporciona información acerca de los procesos fisiológicos a través del estudio de las distribuciones de la temperatura de la piel. Debido a la alta correlación entre ambos lados corporales, las asimetrías térmicas entre flancos contralaterales son una buena indicación de patologías o disfunciones físicas subyacentes. La fiabilidad de la IRT ha sido estudiada con anterioridad en sujetos sanos, pero nunca en usuarios de sillas de ruedas. Las características especiales de la población con discapacidad (problemas de sudoración y termorregulación, distribución sanguínea o medicación), hacen necesario estudiar los factores que afectan a la aplicación de la IRT en usuarios de sillas de ruedas. La bibliografía discrepa en cuanto a los beneficios o daños resultantes de la práctica de la actividad física en las lesiones de hombro por sobreuso en usuarios de sillas de ruedas. Recientes resultados apuntan a un aumento del riesgo de rotura del manguito rotador en personas con paraplejia que practican deportes con elevación del brazo por encima de la cabeza. Debido a esta falta de acuerdo en la literatura, surge la necesidad de analizar el perfil termográfico en usuarios de sillas de ruedas sedentarios y deportistas y su relación con el dolor de hombro. Hasta la fecha sólo se han publicado estudios termográficos durante el ejercicio en sujetos sanos. Un mayor entendimiento de la respuesta termográfica al ejercicio en silla de ruedas en relación al dolor de hombro clarificará su aparición y desarrollo y permitirá una apropiada intervención. El primer estudio demuestra que la fiabilidad de la IRT en usuarios de sillas de ruedas varía dependiendo de las zonas analizadas, y corrobora que la IRT es una técnica no invasiva, de no contacto, que permite medir la temperatura de la piel, y con la cual avanzar en la investigación en usuarios de sillas de ruedas. El segundo estudio proporciona un perfil de temperatura para usuarios de sillas de ruedas. Los sujetos no deportistas presentaron mayores asimetrías entre lados corporales que los sedentarios, y ambos obtuvieron superiores asimetrías que los sujetos sin discapacidad reportados en la literatura. Los no deportistas también presentaron resultados más elevados en el cuestionario de dolor de hombro. El área con mayores asimetrías térmicas fue hombro. En deportistas, algunas regiones de interés (ROIs) se relacionaron con el dolor de hombro. Estos resultados ayudan a entender el mapa térmico en usuarios de sillas de ruedas. El último estudio referente a la evaluación de la temperatura de la piel en usuarios de sillas de ruedas en ejercicio, reportó diferencias significativas entre la temperatura de la piel antes del test y 10 minutos después del test de propulsión de silla de ruedas, en 12 ROIs; y entre el post-test y 10 minutos después del test en la mayoría de las ROIs. Estas diferencias se vieron atenuadas cuando se compararon las asimetrías antes y después del test. La temperatura de la piel tendió a disminuir inmediatamente después completar el ejercicio, e incrementar significativamente 10 minutos después. El análisis de las asimetrías vs dolor de hombro reveló relaciones significativas negativas en 5 de las 26 ROIs. No se encontraron correlaciones significativas entre las variables de propulsión y el cuestionario de dolor de hombro. Todas las variables cinemáticas correlacionaron significativamente con las asimetrías en múltiples ROIs. Estos resultados indican que los deportistas en sillas de ruedas exhiben una capacidad similar de producir calor que los deportistas sin discapacidad; no obstante, su patrón térmico es más característico de ejercicios prolongados que de esfuerzos breves. Este trabajo contribuye al conocimiento de la termorregulación en usuarios de sillas de ruedas durante el ejercicio, y aporta información relevante para programas deportivos y de rehabilitación. ABSTRACT Individuals who use wheelchairs as their main means of mobility have a high incidence (73%) of shoulder pain (SP) owing to overuse and repetitive propulsion movement. There are numerous diagnostic methods for the detection of shoulder pathologies, however the literature claims that a noninvasive accurate test to properly assess shoulder pain would be necessary, and suggests thermography as a suitable technique for joint pain evaluation. Infrared thermography (IRT) provides information about physiological processes by studying the skin temperature (Tsk) distributions. Due to the high correlation of skin temperature between both sides of the body, thermal asymmetries between contralateral flanks are an indicator of underlying pathologies or physical dysfunctions. The reliability of infrared thermography has been studied in healthy subjects but there are no studies that have analyzed the reliability of IRT in wheelchair users (WCUs). The special characteristics of people with disabilities (sweating and thermoregulation problems, or blood distribution) make it necessary to study the factors affecting the application of IRT in WCUs. Discrepant reports exist on the benefits of, or damage resulting from, physical exercise and the relationship to shoulder overuse injuries in WCUs. Recent findings have found that overhead sports increase the risk of rotator cuff tears in wheelchair patients with paraplegia. Since there is no agreement in the literature, the thermographic profile of wheelchair athletes and nonathletes and its relation with shoulder pain should also be analysed. Infrared thermographic studies during exercise have been carried out only with able-bodied population at present. The understanding of the thermographic response to wheelchair exercise in relation to shoulder pain will offer an insight into the development of shoulder pain, which is necessary for appropriate interventions. The first study presented in this thesis demonstrates that the reliability of IRT in WCUs varies depending on the areas of the body that are analyzed. Moreover, it corroborates that IRT is a noninvasive and noncontact technique that allows the measurement of Tsk, which will allow for advances to be made in research concerned with WCUs. The second study provides a thermal profile of WCUs. Nonathletic subjects presented higher side-to-side skin temperature differences (ΔTsk) than athletes, and both had greater ΔTsk than the able-bodied results that have been published in the literature. Nonathletes also revealed larger Wheelchair Users Shoulder Pain Index (WUSPI) score than athletes. The shoulder region of interest (ROI) was the area with the highest ΔTsk of the regions measured. The analysis of the athletes’ Tsk showed that some ROIs are related to shoulder pain. These findings help to understand the thermal map in WCUs. Finally, the third study evaluated the thermal response of WCUs in exercise. There were significant differences in Tsk between the pre-test and the post-10 min in 12 ROIs, and between the post-test and the post-10 in most of the ROIs. These differences were attenuated when the ΔTsk was compared before and after exercise. Skin temperature tended to initially decrease immediately after the test, followed by a significant increase at 10 minutes after completing the exercise. The ΔTsk versus shoulder pain analysis yielded significant inverse relationships in 5 of the 26 ROIs. No significant correlations between propulsion variables and the results of the WUSPI questionnaire were found. All kinematic variables were significantly correlated with the temperature asymmetries in multiple ROIs. These results present indications that high performance wheelchair athletes exhibit similar capacity of heat production to able-bodied population; however, they presented a thermal pattern more characteristic of a prolonged exercise rather than brief exercise. This work contributes to improve the understanding about temperature changes in wheelchair athletes during exercise and provides implications to the sports and rehabilitation programs.
Resumo:
La tesis se centra en el estudio, descripción y análisis del libro publicado por el arquitecto británico George Edmund Street en 1865, bajo el título Some Account of Gothic Architecture in Spain. El libro dio a conocer una de la colecciones más importantes de dibujos realizada en el siglo XIX sobre la arquitectura gótica española, y por lo tanto fue una primera referencia para su estudio, hasta bien entrado el siglo veinte. El volumen incluyó 107 grabados de diversos tipos de edificios con perspectivas y detalles, y 25 láminas con 45 planos de plantas de iglesias y claustros, muchos de ellos publicados por primera vez. Gracias a varias campañas de verano por la mitad norte del país, la casi inexplorada -desde un punto de vista académico- arquitectura española medieval fue finalmente descubierta. Este hecho conduce a una pregunta intrigante que está en el origen de esta investigación ¿cómo pudo Street en pocos viajes sentar las bases de la historia del gótico español que hasta entonces los estudiosos españoles no habían sido capaces de definir? Esta tesis comienza describiendo la obra de Street en su contexto cultural con un breve repaso a su biografía y a su posición profesional y teórica. También su relación con las personas más representativas que participaron en el estudio de la arquitectura gótica, como Robert Willis, William Whewell, Augustus Pugin, o George G. Scott. Se ha prestado especial atención, en explicar su papel relevante en el Gothic Revival, para entender el significado de su interés en la arquitectura gótica continental. Estos capítulos preliminares son seguidos por una revisión del papel del dibujo como herramienta para la arquitectura de los viajeros en sus rutas en busca de la arquitectura gótica. También se trata la influencia de la Royal Academy y sus académicos, (entre los cuales estuvo Street) y su formación académica. Finalmente la tesis entra en el estudio de los planos arquitectónicos que Street hizo durante sus viajes continentales de arquitectura, seguido por una descripción detallada de sus dibujos de España, analizando su método, su técnica, y las nuevas características aportadas, que fueron una novedad en el contexto español. También se lleva a cabo algunos estudios comparativos de los dibujos de España, gracias a una recopilación exhaustiva de bocetos y dibujos originales de Street, que en su gran mayoría se conservan en los archivos del RIBA, cotejándolos con sus versiones finales, con dibujos de la época de otros autores sobre los mismos edificios, y con fotos recientes. La tesis deja claro por qué y cómo Street, gracias a su soporte teórico y habilidades para el dibujo, pudo realizar algo que había pasado desapercibido para los estudiosos españoles de la época (construcción, historia de los estilos, señalamiento de períodos constructivos), lo que le permitió encontrar el lugar adecuado de la arquitectura gótica española en la historia y en el mapa de la arquitectura gótica europea. ABSTRACT This thesis focuses on the study, description and analysis of the book published by the British architect George Edmund Street in 1865, under the title Some Account of Gothic Architecture in Spain. The book displayed one of the most significant collections of drawings on Spanish Gothic Architecture made in the nineteenth century, and therefore was a first reference for its study, until well into the twentieth century. The book included 107 engravings, the surveying of various types of buildings with perspectives and details, and 25 sheets containing 45 ground plans of churches and cloisters, many of them new and published for the first time. Thanks to several summer campaigns in the north half of the country, the almost unexplored -from a scholar point of view- medieval Spanish architecture was eventually revealed. This fact lead to an intriguing question that is at the origin of this research: how could Street in a few trips lay the foundations of the history of Spanish Gothic that until then Spanish scholars had not been able to define? This thesis begins inscribing this Street's work in his cultural context. A brief review of his biography and professional and theoretical positions has been seen as necessary. Also his debts and relationship with the most representative people involved in the study of Gothic architecture, like Robert Willis, William Whewell, Augustus Pugin, or George G. Scott are discussed. Special attention has been paid, taken into account his relevant role in the Gothic Revival, to understand the significance of his interest in continental Gothic architecture. These preliminary chapters are followed by a review of role of drawing as a tool for Architectural travellers in their Tours in search of the Gothic architecture. The influence of the Royal Academy and its academicians, (among which was Street) and his educational background are here tackled. Eventually this thesis enters into the study of the architectural drawings Street made during his continental architectural journeys, which is followed by a detailed description and analysis of the Spanish ones: his methods, his technique, and the new features which were a novelty in the Spanish context are explored. Also in this thesis is carried out some comparative studies thanks to a previous exhaustive gathering of Street's sketches and original drawings, most of which are preserved in the RIBA archives. Their final versions, drawings of the same buildings from other contemporary draughtsman and pictures of their current state are compared with them. This thesis makes clear why and how Street thanks to his theoretical back-ground and portraying skills could realize what have passed unnoticed by contemporary Spanish scholars (construction, genealogy of forms, dating of periods) allowing him to find the proper place of the Spanish architecture in the history and the map of European Gothic architecture.
Resumo:
The influence of training in labor risk prevention and the development of the resulting pre-emptive culture are analyzed within this paper. In order to achieve this, a quantitative analysis of the students of Building Degree in the Technic University of Madrid has been developed. This study has been made in all grades, valuating the previous knowledge acquired during compulsory education. It must be kept in mind that the students in 3rd and 4th grade have received general and specific compulsory training in prevention and safety in the building sector.