14 resultados para litter size in pigs
em Universidad Politécnica de Madrid
Resumo:
Because climate can affect xylem cell anatomy, series of intra-annual cell anatomical features have the potential to retrospectively supply seasonal climatic information. In this study, we explored the ability to extract information about water stress conditions from tracheid features of the Mediterranean conifer Juniperus thurifera L. Tracheidograms of four climatic years from two drought-sensitive sites in Spain were compared to evaluate whether it is possible to link intra-annual cell size patterns to seasonal climatic conditions. Results indicated site-specific anatomical adjustment such as smaller and thicker tracheids at the dryer site but also showed a strong climatic imprint on the intra-annual pattern of tracheid size. Site differences in cell size reflected expected structural adjustments against cavitation failures. Differences between intra-annual patterns, however, indicated a response to seasonal changes in water availability whereby cells formed under drought conditions were smaller and thicker, and vice versa. This relationship was more manifest and stable at the dryer site
Resumo:
he size of seeds and the microsite of seed dispersal may affect the early establishment of seedlings through different physiological processes. Here, we examined the effects of seed size and light availability on seedling growth and survival, and whether such effects were mediated by water use efficiency. Acorns of Quercus petraea and the more drought-tolerant Quercus pyrenaica were sowed within and around a tree canopy gap in a sub-Mediterranean forest stand. We monitored seedling emergence and measured predawn leaf water potential (Ψpd), leaf nitrogen per unit area (Na), leaf mass per area, leaf carbon isotope composition (δ13C) and plant growth at the end of the first summer. Survival was measured on the next year. Path analysis revealed a consistent pattern in both species of higher δ13C as Ψpd decreased and higher δ13C as seedlings emerged later in the season, indicating an increase in 13C as the growing season is shorter and drier. There was a direct positive effect of seed size on δ13C in Q. petraea that was absent in Q. pyrenaica. Leaf δ13C had no effect on growth but the probability of surviving until the second year was higher for those seedlings of Q. pyrenaica that had lower δ13C on the first year. In conclusion, leaf δ13C is affected by seed size, seedling emergence time and the availability of light and water, however, leaf δ13C is irrelevant for first year growth, which is directly dependent on the amount of seed reserves.
Resumo:
Existe normalmente el propósito de obtener la mejor solución posible cuando se plantea un problema estructural, entendiendo como mejor la solución que cumpliendo los requisitos estructurales, de uso, etc., tiene un coste físico menor. En una primera aproximación se puede representar el coste físico por medio del peso propio de la estructura, lo que permite plantear la búsqueda de la mejor solución como la de menor peso. Desde un punto de vista práctico, la obtención de buenas soluciones—es decir, soluciones cuyo coste sea solo ligeramente mayor que el de la mejor solución— es una tarea tan importante como la obtención de óptimos absolutos, algo en general difícilmente abordable. Para disponer de una medida de la eficiencia que haga posible la comparación entre soluciones se propone la siguiente definición de rendimiento estructural: la razón entre la carga útil que hay que soportar y la carga total que hay que contabilizar (la suma de la carga útil y el peso propio). La forma estructural puede considerarse compuesta por cuatro conceptos, que junto con el material, definen una estructura: tamaño, esquema, proporción, y grueso.Galileo (1638) propuso la existencia de un tamaño insuperable para cada problema estructural— el tamaño para el que el peso propio agota una estructura para un esquema y proporción dados—. Dicho tamaño, o alcance estructural, será distinto para cada material utilizado; la única información necesaria del material para su determinación es la razón entre su resistencia y su peso especifico, una magnitud a la que denominamos alcance del material. En estructuras de tamaño muy pequeño en relación con su alcance estructural la anterior definición de rendimiento es inútil. En este caso —estructuras de “talla nula” en las que el peso propio es despreciable frente a la carga útil— se propone como medida del coste la magnitud adimensional que denominamos número de Michell, que se deriva de la “cantidad” introducida por A. G. M. Michell en su artículo seminal de 1904, desarrollado a partir de un lema de J. C. Maxwell de 1870. A finales del siglo pasado, R. Aroca combino las teorías de Galileo y de Maxwell y Michell, proponiendo una regla de diseño de fácil aplicación (regla GA), que permite la estimación del alcance y del rendimiento de una forma estructural. En el presente trabajo se estudia la eficiencia de estructuras trianguladas en problemas estructurales de flexión, teniendo en cuenta la influencia del tamaño. Por un lado, en el caso de estructuras de tamaño nulo se exploran esquemas cercanos al optimo mediante diversos métodos de minoración, con el objetivo de obtener formas cuyo coste (medido con su numero deMichell) sea muy próximo al del optimo absoluto pero obteniendo una reducción importante de su complejidad. Por otro lado, se presenta un método para determinar el alcance estructural de estructuras trianguladas (teniendo en cuenta el efecto local de las flexiones en los elementos de dichas estructuras), comparando su resultado con el obtenido al aplicar la regla GA, mostrando las condiciones en las que es de aplicación. Por último se identifican las líneas de investigación futura: la medida de la complejidad; la contabilidad del coste de las cimentaciones y la extensión de los métodos de minoración cuando se tiene en cuenta el peso propio. ABSTRACT When a structural problem is posed, the intention is usually to obtain the best solution, understanding this as the solution that fulfilling the different requirements: structural, use, etc., has the lowest physical cost. In a first approximation, the physical cost can be represented by the self-weight of the structure; this allows to consider the search of the best solution as the one with the lowest self-weight. But, from a practical point of view, obtaining good solutions—i.e. solutions with higher although comparable physical cost than the optimum— can be as important as finding the optimal ones, because this is, generally, a not affordable task. In order to have a measure of the efficiency that allows the comparison between different solutions, a definition of structural efficiency is proposed: the ratio between the useful load and the total load —i.e. the useful load plus the self-weight resulting of the structural sizing—. The structural form can be considered to be formed by four concepts, which together with its material, completely define a particular structure. These are: Size, Schema, Slenderness or Proportion, and Thickness. Galileo (1638) postulated the existence of an insurmountable size for structural problems—the size for which a structure with a given schema and a given slenderness, is only able to resist its self-weight—. Such size, or structural scope will be different for every different used material; the only needed information about the material to determine such size is the ratio between its allowable stress and its specific weight: a characteristic length that we name material structural scope. The definition of efficiency given above is not useful for structures that have a small size in comparison with the insurmountable size. In this case—structures with null size, inwhich the self-weight is negligible in comparisonwith the useful load—we use as measure of the cost the dimensionless magnitude that we call Michell’s number, an amount derived from the “quantity” introduced by A. G. M. Michell in his seminal article published in 1904, developed out of a result from J. C.Maxwell of 1870. R. Aroca joined the theories of Galileo and the theories of Maxwell and Michell, obtaining some design rules of direct application (that we denominate “GA rule”), that allow the estimation of the structural scope and the efficiency of a structural schema. In this work the efficiency of truss-like structures resolving bending problems is studied, taking into consideration the influence of the size. On the one hand, in the case of structures with null size, near-optimal layouts are explored using several minimization methods, in order to obtain forms with cost near to the absolute optimum but with a significant reduction of the complexity. On the other hand, a method for the determination of the insurmountable size for truss-like structures is shown, having into account local bending effects. The results are checked with the GA rule, showing the conditions in which it is applicable. Finally, some directions for future research are proposed: the measure of the complexity, the cost of foundations and the extension of optimization methods having into account the self-weight.
Resumo:
Estimates of effective population size in the Holstein cattle breed have usually been low despite the large number of animals that constitute this breed. Effective population size is inversely related to the rates at which coancestry and inbreeding increase and these rates have been high as a consequence of intense and accurate selection. Traditionally, coancestry and inbreeding coefficients have been calculated from pedigree data. However, the development of genome-wide single nucleotide polymorphisms has increased the interest of calculating these coefficients from molecular data in order to improve their accuracy. In this study, genomic estimates of coancestry, inbreeding and effective population size were obtained in the Spanish Holstein population and then compared with pedigree-based estimates. A total of 11,135 animals genotyped with the Illumina BovineSNP50 BeadChip were available for the study. After applying filtering criteria, the final genomic dataset included 36,693 autosomal SNPs and 10,569 animals. Pedigree data from those genotyped animals included 31,203 animals. These individuals represented only the last five generations in order to homogenise the amount of pedigree information across animals. Genomic estimates of coancestry and inbreeding were obtained from identity by descent segments (coancestry) or runs of homozygosity (inbreeding). The results indicate that the percentage of variance of pedigree-based coancestry estimates explained by genomic coancestry estimates was higher than that for inbreeding. Estimates of effective population size obtained from genome-wide and pedigree information were consistent and ranged from about 66 to 79. These low values emphasize the need of controlling the rate of increase of coancestry and inbreeding in Holstein selection programmes.
Resumo:
El objetivo general de esta Tesis Doctoral fue evaluar nuevos sistemas de alojamiento y cría de conejos de granja, estudiando tanto parámetros comportamentales (experimento 1) como productivos y reproductivos (experimento 3). Además, se evaluaron diferentes técnicas de muestreo con el fin de optimizar el tiempo empleado para el estudio del comportamiento animal (experimento 2). En el experimento 1, se estudió el comportamiento de conejas alojadas en dos tipos de jaulas (TJ), convencionales vs. alternativas con una plataforma elevada, en distintos estados fisiológicos (EF), lactantes y gestantes. Se observó el comportamiento de 12 conejas reproductoras con grabaciones de una duración de 24 h continuas. Independientemente del EF y TJ, las conejas pasaron gran parte de su tiempo sobre el reposapatas (57,7 %, de media). Sin embargo, debido al uso de la plataforma (23,0% del tiempo, de media), las conejas lactantes permanecieron un 36,6 % menos de tiempo (P<0,001) sobre el reposapatas y las gestantes un 27,0% menos (P<0,001) sobre el enrejillado en jaulas alternativas que en convencionales. En las jaulas alternativas, las conejas podían adoptar la postura “levantada”, sin embargo ésta fue observada solamente en conejas gestantes una media de 4,6 veces al día. Las conejas bebieron con mas frecuencia en jaulas convencionales que en alternativas (24,6 vs 19,1 veces al día; P<0,05). Se observó una mayor duración y frecuencia del comportamiento “interactuando con compañeras” en conejas gestantes alojadas en jaulas convencionales (276 s/d y 4,6 veces/d; P<0,05). La frecuencia de “interactuando con gazapos” fue menor en jaulas alternativas que en convencionales (2,4 vs 8,6 veces al día; P<0,01). La hora del día afectó al comportamiento de las conejas, teniendo un comportamiento menos activo durante las horas centrales del día. Durante las horas de oscuridad, las conejas estuvieron más inquietas realizando comportamientos como ‘encabritarse’ o amamantar, coincidiendo éstos en el tiempo en el cual las conejas pasaron más tiempo en la plataforma. Las conejas utilizaron frecuentemente la plataforma, independientemente del estado fisiológico. En la fase de lactación, las conejas utilizaron la plataforma para huir de los intentos de mamar por parte de los gazapos cuando éstas no estaban receptivas. El uso de la plataforma puede dar lugar a problemas higiénicos debidos tanto por la acumulación de heces sobre ella como por la caída de heces y orina sobre los animales que están en la parte inferior. La ausencia de estereotipias por parte de las conejas tanto en jaulas alternativas como en convencionales no sugiere una falta de bienestar debida al sistema de alojamiento. En el experimento 2, se compararon distintos métodos de observación simplificada con respecto un método de referencia usando grabaciones continuas de 24 h para la evaluación del comportamiento de conejas en distintos estados fisiológicos (gestantes y lactantes) alojadas en dos tipos de jaulas (convencionales y alternativas). Se analizaron un total de 576 h de grabaciones continuas de 24 h en 12 conejas reproductoras al final del periodo de lactación y en las mismas conejas después del destete. Los comportamientos observados se clasificaron en tres categorías independientes (localización en la jaula, postura y comportamientos funcionales). Se utilizaron grabaciones continuas de 24 h como método de referencia para validar otros cuatro métodos de observación simplificados, utilizando grabaciones de distinta duración y frecuencia a lo largo del día. Métodos regulares: corto y largo con 2.4 y 8 h de observación respectivamente, y métodos irregulares: corto y largo con 6 y 8 h de observación, respectivamente. Como resultado, se observó que independientemente del sistema de alojamiento, el mejor método para reducir el tiempo de observación necesario para evaluar el comportamiento de conejas reproductoras depende del tipo de variable a estudiar y del estado fisiológico de las conejas. En gestantes, los métodos irregulares no fueron adecuados para estimar comportamientos de larga duración tales como tumbada, sentada, descansando y acicalándose. Sin embargo, en ambos estados fisiológicos, los métodos regulares fueron precisos para los comportamientos de los grupos localización y postura y para comportamientos funcionales de larga duración. Por otro lado, los coeficientes de variación de los comportamientos poco frecuentes realizados principalmente durante el periodo de oscuridad fueron muy altos, y el método irregular largo obtuvo los menores errores de estimación para éstos comportamientos. En el experimento 3, se estudió el efecto de un uso combinado de lactaciones largas (hasta 46 días) con jaulas alternativas sobre los parámetros productivos y reproductivos de 104 conejas y sus camadas durante cinco ciclos reproductivos. La mitad de las conejas fueron alojadas en jaulas polivalentes convencionales (39 cm x 100 cm x 30 cm) y la otra mitad en jaulas polivalentes alternativas (39 cm x 100 cm x 60 cm), con una plataforma elevada. Dentro de cada grupo de alojamiento, la mitad de las conejas se destetaron a 32 días y la otra mitad a 46 días tras el parto. Las lactaciones más largas afectaron negativamente al peso (P<0,001), contenido en grasa y energía (P<0,05) de las conejas al final del periodo de lactación, pero éste efecto disminuyó con el número de partos. La fertilidad, prolificidad y la mortalidad de las conejas no fue afectada por la duración de la lactación. El destete tardío dio lugar a un mayor tamaño y peso de la camada al final del periodo de crecimiento (8,9 y 11,3 %, respectivamente) y a un menor índice de conversión por jaula durante el todo el periodo experimental (13,5 %) con respecto al destete convencional (P<0,001). Éstos resultados fueron paralelos a la menor mortalidad global (12,6 vs 17,6 %; P<0,05) observada en gazapos con destete tardío. Las diferencias en los parámetros productivos con las distintas edades al destete sólo fueron observadas en los ciclos con peor estado sanitario (tercer y quinto ciclo), en los cuales el destete tardío redujo la mortalidad. El tipo de jaula no afectó al peso de la coneja, condición corporal, mortalidad, fertilidad ni tamaño de camada durante los cinco primeros ciclos reproductivos. Sin embargo, el peso de la camada y el índice de conversión a los 21 días de edad fueron 4,2% mayor (P<0,001) y 5,0% menor (P<0,005) en animales alojados en jaulas alternativas que en jaulas convencionales. A día 59 las jaulas alternativas dieron lugar a camadas más pesadas (P<0,01); sin embargo, éste efecto fue influenciado por la densidad alcanzada en cada ciclo, ya que cuando la densidad de los animales fue menor que 40kg/m2 (tercer y quinto ciclo), el efecto del tipo de jaula sobre el peso de la camada no fue significativo. De los resultados obtenidos se puede concluir que el uso combinado de lactaciones más largas y jaulas con mayor superficie disponible con una plataforma elevada podría ser una alternativa para mejorar el bienestar animal en determinadas situaciones productivas. ABSTRACT The general aim of this PhD Thesis was to evaluate new housing and husbandry systems of farmed rabbits, studying behavioral (experiment 1), productive and reproductive (experiment 3) parameters. Moreover, different sampling techniques were evaluated in order to optimize the assessment of rabbit behaviour (experiment 2). In experiment 1, the behaviour of rabbit does housed in two different types of cage (TC), conventional vs. alternative with an elevated platform, at different physiological stages (PS), lactation and gestation was to study. Behavioural observations were carried out on 12 commercial rabbit does using continuous 24 hour video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (57.7 %, as average). However, due to the use of platforms (23.0% of time, as average), lactating does spent 36.6% less time (P<0.001) on foot mats and gestating does spent 27.0% less (P<0.001) time on wire mesh in alternative cages than in conventional cages. Alternative cages allowed for standing posture but this behaviour was only observed in gestating does (4.6 times a day, as average). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Does’ behaviour was influenced by hour of day, being less active at the midday hours. During dark hours rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, independent of their physiological state, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kids trying to suckle. The use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. Stereotypies were not observed in any housing system, therefore conventional cages do not suggest lack of animal welfare. In experiment 2, it was compared the results of different simplified sampling methods of behavioural data with respect to reference records of 24-h in order to assess rabbit does behaviours at different physiological stages (gestation and lactation) in animals housed in two types of cages (conventional and alternative). A total of 576 h of continuous video of 12 rabbit does at the end of lactation and on the same females after weaning were analysed. The behavioural observations were studied using three independent categories of classification (location in the cage, posture and functional behaviours). Continuous behavioural recordings of 24 h were considered as the reference method to validate another 4 sampling methods of data collection by aggregated video recordings of different frequency and duration (regular short and long methods with 2.4 and 8 h of observation respectively, and irregular short and long methods with 6 and 8 h of observation, respectively). The current results showed that, independently of housing system, the best method to reduce the total observation time required to assess rabbit does behaviour depends on the trait studied and physiological stage of does. In gestating does, irregular methods were not suitable to estimate behaviours of long duration such as lying, sitting, resting and grooming. However, in both physiological stages, regular methods were accurate for location behaviours, postures and functional behaviours of long duration. Instead, for the study of infrequent behaviours performed mainly during dark period, where coefficients of variation were high, the irregular long method led to the lowest mean estimation errors. In experiment 3, the effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cages were weaned at 32 and the other half at 46 days after parturition. Longer lactations affected negatively to body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9 %) and litter weight (by 11.3 %) at the end of growing period and lower feed conversion ratio per cage during the overall experimental period (13.5 %) than standard weaning (P<0.001). These results were parallels to a lower mortality (12.6 vs 17.6 %; P<0.05) of young rabbit weaned later during the overall experimental period. Differences in performances at different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five firsts reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio were 4.2 % higher (P<0.001) and 5.0 % lower (P<0.005) in animals housed in alternative than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01); however, this effect was influenced by density reached in each cycle, as when the density of animals was lower than 40 kg/m2 (cycles three and five), the difference of litter weight between alternative and conventional cages was not significant. From the results obtained it can be concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be an alternative to improve animal welfare in some productive situations.
Resumo:
Respiratory motion is a major source of reduced quality in positron emission tomography (PET). In order to minimize its effects, the use of respiratory synchronized acquisitions, leading to gated frames, has been suggested. Such frames, however, are of low signal-to-noise ratio (SNR) as they contain reduced statistics. Super-resolution (SR) techniques make use of the motion in a sequence of images in order to improve their quality. They aim at enhancing a low-resolution image belonging to a sequence of images representing different views of the same scene. In this work, a maximum a posteriori (MAP) super-resolution algorithm has been implemented and applied to respiratory gated PET images for motion compensation. An edge preserving Huber regularization term was used to ensure convergence. Motion fields were recovered using a B-spline based elastic registration algorithm. The performance of the SR algorithm was evaluated through the use of both simulated and clinical datasets by assessing image SNR, as well as the contrast, position and extent of the different lesions. Results were compared to summing the registered synchronized frames on both simulated and clinical datasets. The super-resolution image had higher SNR (by a factor of over 4 on average) and lesion contrast (by a factor of 2) than the single respiratory synchronized frame using the same reconstruction matrix size. In comparison to the motion corrected or the motion free images a similar SNR was obtained, while improvements of up to 20% in the recovered lesion size and contrast were measured. Finally, the recovered lesion locations on the SR images were systematically closer to the true simulated lesion positions. These observations concerning the SNR, lesion contrast and size were confirmed on two clinical datasets included in the study. In conclusion, the use of SR techniques applied to respiratory motion synchronized images lead to motion compensation combined with improved image SNR and contrast, without any increase in the overall acquisition times.
Resumo:
The numerical analysis of certain safety related problems presents serious difficulties, since the large number of components present leads to huge finite elementmodels that can only be solved by using large and expensive computers or by making rough approaches to the problem. Tangling, or clashing, in the turbine of a jet engine airplane is an example of such problems. This is caused by the crash and friction between rotor and stator blades in the turbine after an eventual shaft failure. When facing the study of an event through numerical modelling, the accurate simulation of this problem would require the engineer to model all the rotor and stator blades existing in the turbine stage, using a small element size in all pieces. Given that the number of stator and rotor blades is usually around 200, such simulations would require millions of elements. This work presents a new numerical methodology, specifically developed for the accurate modelling of the tangling problem that, depending on the turbine configuration, is able to reduce the number of nodes up to an order of magnitude without losing accuracy. The methodology, which benefits from the cyclic configuration of turbines, is successfully applied to the numerical analysis of a hypothetical tangling event in a turbine, providing valuable data such as the rotating velocity decrease of the turbine, the braking torque and the damage suffered by the blades. The methodology is somewhat general and can be applied to any problem in which damage caused by the interaction between a rotating and static piece is to be analysed.
Resumo:
Los objetivos principales de esta Tesis Doctoral fueron estudiar en 4 ensayos los efectos a) del procesado del maíz y la inclusión en los piensos de ingredientes de alta calidad como harina de pescado o fuentes de lactosa en lechones blancos b) inclusión en el pienso de diferentes productos derivados del haba de soja, con diferente contenido de proteína bruta (PB), tamaño de partícula y origen en lechones blancos e ibéricos y c) inclusión en el pienso de lechones ibéricos de ingredientes de alta calidad; forma de presentación del pienso y la duración del suministro del pienso prestárter sobre los parámetros productivos, la digestibilidad de los nutrientes, y las características morfológicas de la mucosa digestiva en lechones blancos e ibéricos recién destetados. En el experimento 1, los efectos de la complejidad del pienso prestárter sobre los parámetros productivos y la digestibilidad total aparente (TTAD) de los nutrientes fueron estudiados en lechones blancos recién destetados. Se utilizaron 10 tratamientos experimentales como resultado de 5 piensos prestárter (21 a 41 d de edad) y 2 piensos estárter (42 a 62 d de edad). Los piensos prestárter consistieron en un control negativo que incluía 40% de maíz crudo, 4% de harina de pescado y 7% de lactosa, un control positivo que incluía 40% de maíz cocido, 10% de harina de pescado, y 14% de lactosa, y 3 piensos adicionales con similares ingredientes que el pienso control positivo pero en los que a) 40% de maíz cocido fue sustituido por el mismo porcentaje de maíz crudo, b) se redujo el nivel de harina de pescado del 10 al 4%, y c) se redujo el nivel de lactosa del 14 al 7%. Cada tratamiento se replicó 6 veces (6 lechones/departamento). De 42 a 62 d de edad, la mitad de cada uno de los 5 piensos prestárter recibió un pienso estándar compuesto por harina de soja- maíz crudo y manteca y la otra mitad un pienso con similar perfil nutricional pero incluyendo un 20% de maíz cocido, 5% de harina de pescado, 1.3% de lactosa, 2% de concentrado de proteína de soja obtenido por fermentación y 1% de aceite de soja en lugar de harina de soja, maíz sin procesar y manteca. La complejidad del pienso no afectó a los parámetros productivos en ninguno de los periodos estudiados, pero el índice de diarreas durante la fase prestárter fue mayor en los lechones que recibieron el pienso control negativo que en los alimentados con cualquiera de los otros piensos (P<0.05). A los 30 días de edad (piensos prestárter), la digestibilidad de la materia orgánica (MO) y de la energía bruta (EB) fue menor (P<0.001) en los lechones que consumieron el pienso control negativo que en los lechones que consumieron cualquiera de los otros piensos. Sin embrago, la digestibilidad fecal de la PB no fue afectada. A los 50 días de edad (piensos estárter), la digestibilidad de los nutrientes fue similar en ambos piesnsos. Se concluye que la utilización de niveles elevados de ingredientes de alta calidad en los piensos no mejora los parámetros productivos de los lechones blancos en ninguno de los períodos estudiados. De 21 a 41 días de edad, el índice de diarreas se redujo y la digestibilidad de los nutrientes aumentó con la utilización de piensos de mayor calidad. Por lo tanto, la utilización de piensos con niveles elevados de ingredientes de calidad para reducir problemas digestivos y por lo tanto, mejorar los parámetros productivos podría estar justificada en algunos casos. En el experimento 2, se estudiaron los efectos de la inclusión en el pienso de harina de soja con diferente contenido de PB (44 vs. 49 % PB), la micronización de la harina de soja de alta proteína (AP-HS; 49% PB) y la utilización de concentrado de proteína de soja (CPS; 65% PB) sobre los parámetros productivos y la TTAD de los nutrientes en lechones blancos recién destetados de 28 a 63 días de edad. De 28 a 49 días de edad (fase I), hubo un pienso control positivo con un 10% de CPS, un pienso control negativo con 14.8% de harina de soja estándar (R-HS; 44% de PB) y otros 4 piensos que incluían 13.3% de AP-HS de origen Americano (USA) o Argentino (ARG) y molidas groseramente (980 μm) o micronizadas (80 μm). Cada tratamiento se replicó 8 veces (6 lechones/departamento). De 49 a 63 días de edad (fase II), todos los lechones recibieron un pienso comercial común en forma de harina. En el global de la fase I, el tratamiento experimental no afectó a ninguno de los parámetros productivos estudiados. Sin embargo, de 28 a 35 días de edad, los lechones alimentados con AP-HS micronizadas tuvieron un mejor índice de conversión (IC; 1.11 vs. 0.98; P<0.05) que los alimentados con AP-HS molidas groseramente. También, de 35 a 42 días de edad, los lechones que recibieron el pienso con AP-HS micronizada tendieron (P=0.08) a consumir más pienso que los lechones que consumieron el pienso con AP-HS molida. Durante la fase II (49 a 63 días de edad), cuando todos los lechones recibieron un pienso común, no se observaron diferencias en productividad de los lechones debido al tratamiento previo. En general, la digestibilidad de los nutrientes a los 35 días de edad fue mayor para los lechones que consumieron CPS que para los lechones que consumieron R-HS con los lechones que consumieron AP-HS en una posición intermedia. La digestibilidad de la PB fue mayor (P≤0.01) para el pienso que contenía CPS que para el promedio de los 5 tratamientos en base a HS. También, la digestibilidad de la MO y de la materia seca (MS) fue mayor para el pienso que contenía AP-HS micronizada o molida groseramente que para el pienso que contenía R-HS. La micronización de la AP-HS no tuvo efecto alguno sobre la digestibilidad de los nutrientes. Se concluye que cuando el CPS sustituye en el pienso a R-HS, la digestibilidad de la PB aumenta pero no tiene efecto alguno sobre los parámetros productivos. La utilización de AP-HS en sustitución de R-HS en el pienso mejora la digestibilidad de los nutrientes pero no afecta a los parámetros productivos. La utilización de harina de soja micronizada en los piensos mejora la eficiencia alimenticia durante la primera semana post-destete pero no tiene efecto alguno sobre la digestibilidad de los nutrientes. En general, la inclusión de productos derivados del haba de soja con un alto valor añadido (CPS o AP-HS) en el pienso presenta pocas ventajas en términos productivos al uso de AP-HS en lechones blancos recién destetados. En el experimento 3, se estudiaron los mismos productos de soja y piensos similares al experimento 2 en lechones ibéricos recién destetados. Además de los parámetros productivos y la TTAD de los nutrientes, en este ensayo se estudió también la digestibilidad ileal aparente (AID) de los nutrientes, así como las características histológicas y morfometría de la mucosa ileal. Cada uno de los 6 tratamientos fue replicado 6 veces (6 lechones/departamento). De 30 a 51 días de edad la fuente de harina de soja no afectó a los parámetros productivos, pero el índice de diarreas fue mayor (P<0.001) y la TTAD y AID de los nutrientes menor en los lechones alimentados con R-HS que en los alimentados con CPS o AP-HS. Sin embargo, no se encontró ninguna diferencia para éstos parámetros entre los piensos que contenían AP-HS y CPS. La TTAD de la MO (P=0.07) y de la EB (P=0.05) tendieron a ser mayores en los piensos basados en AP-HS micronizada que en los basados en AP-HS molida. La TTAD de la EB tendió (P<0.05) a ser mayor para la AP-HS de origen USA que para la AP-HS de origen ARG. Los lechones que consumieron R-HS presentaron villi de menor longitud (P<0.01) que los lechones que consumieron AP-HS o CPS, pero no se observaron diferencias en el caso de los lechones que recibieron los piensos que contenían AP-HS o CPS. Se concluye que la inclusión de AP-HS o CPS en el pienso en sustitución de R-HS reduce el índice de diarreas y mejora la digestibilidad de los nutrientes y las características morfológicas del íleon sin afectar a los parámetros productivos. La utilización de piensos basados en productos derivados del haba de soja con mayor valor añadido (CPS o AP-HS) en sustitución de la R-HS, mejora la TTAD de todos los nutrientes y reduce el índice de diarreas si llegar afectar a los parámetros productivos. En el experimento 4 se estudiaron los efectos del contenido de PB y la complejidad del pienso, la presentación física y la duración del suministro del pienso prestárter sobre los parámetros productivos y la TTAD de los nutrientes en lechones ibéricos recién destetados de 28 a 63 días de edad. Hubo 12 tratamientos experimentales con 2 tipos de pienso (AC; calidad alta y BC: calidad media), 2 presentaciones del pienso (gránulo y harina) y 3 duraciones de suministro del pienso prestárter (7, 14 y 21 días). Desde los 7, 14 y 21 días de experimento (dependiendo del tratamiento), hasta los 35 días, todos los lechones recibieron un pienso comercial en forma de harina. Cada uno de los tratamientos fue replicado 3 veces (6 lechones/departamento). En el global del experimento, la ganancia media diaria (GMD; P<0.05) y el consumo medio diario (CMD; P<0.01) fue menor en los lechones que recibieron el pienso AC que para los que recibieron el pienso de BC, si bien el IC no se vio afectado. La granulación del pienso prestárter no afectó a los crecimientos pero mejoró la eficiencia alimenticia. La utilización del pienso prestárter de 0 a 21 días de prueba mejoró el IC (P<0.05), pero redujo la GMD (P<0.01) en comparación con la utilización de éste pienso solo durante 7 o 14 días. El índice de diarreas tendió a ser mayor (P=0.06) en los lechones alimentados con los piensos AC que en los alimentados con los piensos BC. Asimismo, el índice de diarreas fue superior en los lechones que recibieron el pienso en gránulo que los que los recibieron en harina (P<0.001). Además, el índice de diarreas fue superior en los lechones que recibieron el pienso prestárter durante 14 o 21 días que en los que lo recibieron solo durante 7 días (P<0.01). De 28 a 49 días de edad, la GMD y el IC no se vieron afectados por la complejidad del pienso, pero la presentación en gránulo o el aumento en la duración de suministro del pienso prestárter mejoró el IC (P<0.01). También, en este periodo el índice de diarreas fue mayor en lechones alimentados con piensos granulados que aquellos alimentados con piensos en harina. Asimismo, fue superior para los lechones alimentados con el pienso prestárter durante 14 o 21 días que para los que recibieron éste pienso solo durante 7 días (P<0.01). De 49 a 63 días de edad, los lechones que previamente habían recibido piensos BC crecieron más que los que recibieron piensos AC (P<0.001). Asimismo, los lechones que recibieron el pienso prestárter durante 21 días comieron (P< 0.001) y crecieron menos (P<0.05) presentando una peor eficacia alimenticia (P<0.05) que los lechones que lo recibieron solo durante 7 14 días. La digestibilidad de la MO fue mayor en los lechones alimentados con los piensos AC que en los alimentados con piensos BC (P<0.05). La granulación del pienso mejoró la digestibilidad de los principales nutrientes. Los piensos prestárter AC mejoraron la digestibilidad de los nutrientes pero no la eficiencia alimenticia en lechones ibéricos de 28 a 63 días de edad. La granulación del pienso mejoró la eficiencia alimenticia. El aumento del suministro del pienso prestárter de 7 a 21 días mejoró la eficiencia alimenticia pero redujo la GMD. Por lo tanto, la utilización de piensos granulados de alta calidad durante el periodo prestárter es recomendable en lechones ibéricos, pero solo durante la primera semana post-destete. ABSTRACT The main objectives of this PhD Thesis were to study the effects of a) heat processing (HP) of corn and inclusion of high quality ingredients of animal origin such as fish meal (FM) and dried milk products in the diet, b) inclusion of different soy products varying in crude protein (CP) content, particle size, and origin of the beans in diets for conventional white and Iberian weanling pigs, and c) effects of ingredient quality, feed form, and duration of supply of the phase I diets on growth performance, nutrient digestibility, and intestinal morphology of weanling pigs. In experiment 1, the effect of diet complexity on total tract apparent digestibility (TTAD) and growth performance was studied in piglets from 21 to 62 d of age. There were 10 experimental treatments which resulted from the combination of 5 phase I (21 to 41 d of age) and 2 phase II (42 to 62 d of age) diets. The 5 phase I diets consisted of a negative control diet that contained 40 % raw corn, 4% FM, and 7% lactose (LAC); a positive control diet that contained 40 % HP corn, 10% FM, and 14% LAC, and 3 extra diets that used similar ingredients to those of the positive control diet but in which a) 40% of HP corn was substituted by raw corn, b) 4% FM rather than 10% FM, and c) 7% LAC instead of 14% LAC were included in the diet. Each treatment was replicated 6 times (6 pigs per pen). From 42 to 62 d of age, half of the pens of each of the 5 phase I treatments received a standard soybean meal (SBM)–native corn–lard diet wheras the other half received a diet with similar nutrient profile but that included 20% HP corn, 5% FM, 1.3% lactosa, 2% fermented soy protein concentrate, and 1% soybean oil in substitution of variables amounts of non-processed corn, SBM, and lard. Dietary treatment did not affect piglet performance at any age, but the incidence of post-weaning diarrhea (PWD) was higher during phase I in piglets fed the negative control diet than in piglets fed any of the other diets (P<0.05). At 30 d of age (phase I diets), the TTAD of organic matter (OM) and gross energy (GE) was lower (P<0.001) in pigs fed the negative control diet than in pigs fed the other diets but CP digestibility was not affected. At 50 d of age (phase II diets), dietary treatment did not affect TTAD of any dietary component. It is concluded that the use of high quality ingredients at high levels in the diet did not improve growth performance of piglets at any age. From 21 to 41 d of age, PWD was reduced and nutrient digestibility was increased in pigs fed the more complex diets. Consequently, the inclusion of high levels of high quality ingredients in piglet diets to maximize growth performance might not be justified under all circumstances In experiment 2, the effect of CP content (44 vs. 49 % CP) of SBM, micronization (fine grinding) of the high CP SBM (HP-SBM; 49% CP), and soy protein concentrate (SPC; 65% CP) on TTAD and growth performance was studied in conventional white piglets from 28 to 63 d of age. From 28 to 49 d of age (phase I), there was a positive control diet that included 6.5% CP from SPC and a negative control diet that supplied the same amount of CP as regular SBM (R-SBM; 44% CP) of Argentina (ARG) origin. The other 4 diets included the same amount of dietary CP from 2 sources of HP-SBM (USA or ARG origin), either ground (990 μm) or micronized (60 μm). Each treatment was replicated 8 times (6 pigs per pen). From 49 to 63 d of age (phase II), all pigs were fed a common commercial starter diet. For the entire phase I, type of soy product included in the diet did not affect growth performance of the pigs. However, from 28 to 35 d of age pigs fed the micronized HP-SBM had better feed conversion ratio (FCR; 0.90 vs. 1.01; P<0.05) than pigs fed the ground HP-SBM. Also, from 35 to 42 d of age, average daily feed intake (ADFI) tended to be higher (P=0.08) for pigs fed the micronized HP-SBM than for pigs fed the ground HP-SBM. During phase II, when all the pigs received the same diet, no differences among treatments were observed. In general, the TTAD of nutrients at 35 d of age was higher for the SPC than for the R-SBM diet with the HP-SBM diets being intermediate. The TTAD of CP was higher (83.8% vs. 81.9%; P≤0.01) for the SPC diet than for the average of 5 SBM containing diets. Also, the digestibility of OM and dry matter (DM) was higher (P<0.01) for the HP-SBM, either ground or micronized, than for the R-SBM diet. Micronization of the HP-SBM did not affect nutrient digestibility. It is concluded that when R-SBM was substituted by SPC, CP digestibility was improved but no effects on growth performance were observed. The use of HP-SBM in substitution of R-SBM in the diet improved nutrient digestibility but did not affect piglet performance. The inclusion of micronized HP-SBM in the diet improved FCR during the first week post-weaning but did not affect TTAD of nutrients. Therefore, the inclusion of added value soy products (SPC or micronized SBM) in the diet presents little advantage in terms of growth performance over the use of HP-SBM in pigs weaned at 28 d of age. In experiment 3, the effects of the same sources of soy protein used in experiment 2 on TTAD and growth performance of crossbreed Iberian pigs from 30 to 61 d of age were studied. In addition, the apparent ileal digestibility (AID) of nutrients and mucosa ileum morphology were also determined. Dietary treatment did not affect growth performance of the pigs at any age but from 30 to 51 d of age (phase I diets), PWD was higher (P<0.001) and the TTAD and AID of all nutrients were lower for pigs fed the R-SBM diet than for pigs fed the HP-SBM or the SPC diets. However, no differences between the HP-SBM and the SPC containing diets were detected for digestibility of any dietary component. The TTAD of OM (P=0.07) and GE (P=0.05) tended to be higher for the micronized HP-SBM than for the ground HP-SBM and that of GE was higher (P<0.05) for the USA meal than for the ARG meal. Pigs fed R-SBM had lower villus height (P<0.01) than pigs fed HP-SBM or SPC but no differences in ileal mucosal morphology were detected between SPC and HP-SBM containing diets. It is concluded that feeding the HP-SBM or SPC in substitution of R-SBM reduced PWD and improved nutrient digestibility and ileal morphology in piglets as compared with feeding the R-SBM, but had no effect on growth performance. The inclusion in the diet of added value soy products (micronized SBM or SPC) in substitution of the R-SBM increased the TTAD of all nutrients and reduced PWD but had no advantage in terms of growth performance over the use of ground HP-SBM. In experiment 4, the effect of CP content and ingredient complexity, feed form, and duration of feeding of the phase I diets on growth performance and TTAD of nutrients were studied in Iberian pigs from 28 to 63 d of age. There were 12 dietary treatments with 2 type of feeds (HQ; higher quality and LQ; medium quality), 2 feed forms (pellets vs. mash), and 3 durations of supply (7, 14, and 21 d) of the phase I diets. From d 7, 14, or 21 (depending on treatment) to d 35 of experiment, all pigs received a common diet in mash form. Each treatment was replicated 3 times (6 pigs/pen). For the entire experiment, average daily gain (ADG; P<0.05) and ADFI (P<0.01) were lower with the HQ than with the LQ phase I diets but FCR was not affected. Pelleting of the phase I diets did not affect ADG but improved FCR (P<0.01). Feeding the phase I diets from d 0 to 21 improved FCR (P<0.05) but decreased ADG (P<0.01) as compared with 7 or 14 d of feeding. Post-weaning diarrhea tended to be higher (P=0.06) for pigs fed the HQ diets than for pigs fed the LQ diets and for pigs fed pellets than for pigs fed mash (P<0.001). Also, PWD was higher for pigs fed the phase I diet for 14 or 21 d than for pigs fed this diet for 7 d (P<0.01). From d 0 to 21, ADG and FCR were not affected by feed quality but feeding pellets or increasing the duration of feeding the phase I diets improved FCR (P<0.01). Also, in this period PWD was higher with pellets than with mash and for pigs fed the phase I diets for 14 or 21 d than for pigs fed this diet for only 7 d (P<0.01). From d 21 to 35, pigs previously fed the LQ diet had higher ADG than pigs fed the HQ phase I diets (P<0.001). Also, pigs that were fed the phase I diets for 21 d had lower ADG (P<0.05) and ADFI (P< 0.001) and poor FCR (P<0.05) than pigs fed these diets for 7 or 14 d. Organic matter digestibility was higher for pigs fed the HQ phase I diets than for pigs fed the LQ phase I diets (P<0.05). Pelleting improved TTAD of all nutrients (P<0.01). It is concluded that HQ phase I diets increased TTAD of nutrients but not feed efficiency of Iberian pigs from d 28 to 63 d of age. Also, pelleting improved nutrient digestibility and feed efficiency. Increasing the duration of supply of the phase I diets from 7 to 21 d improved feed efficiency but reduced ADG. Therefore, the use of LQ phase I diets in pellet form for no more than 7 d after weaning is recommended in Iberian pigs.
Resumo:
Objectives The study sought to evaluate the ability of cardiac magnetic resonance (CMR) to monitor acute and long-term changes in pulmonary vascular resistance (PVR) noninvasively. Background PVR monitoring during the follow-up of patients with pulmonary hypertension (PH) and the response to vasodilator testing require invasive right heart catheterization. Methods An experimental study in pigs was designed to evaluate the ability of CMR to monitor: 1) an acute increase in PVR generated by acute pulmonary embolization (n = 10); 2) serial changes in PVR in chronic PH (n = 22); and 3) changes in PVR during vasodilator testing in chronic PH (n = 10). CMR studies were performed with simultaneous hemodynamic assessment using a CMR-compatible Swan-Ganz catheter. Average flow velocity in the main pulmonary artery (PA) was quantified with phase contrast imaging. Pearson correlation and mixed model analysis were used to correlate changes in PVR with changes in CMR-quantified PA velocity. Additionally, PVR was estimated from CMR data (PA velocity and right ventricular ejection fraction) using a formula previously validated. Results Changes in PA velocity strongly and inversely correlated with acute increases in PVR induced by pulmonary embolization (r = –0.92), serial PVR fluctuations in chronic PH (r = –0.89), and acute reductions during vasodilator testing (r = –0.89, p ≤ 0.01 for all). CMR-estimated PVR showed adequate agreement with invasive PVR (mean bias –1.1 Wood units,; 95% confidence interval: –5.9 to 3.7) and changes in both indices correlated strongly (r = 0.86, p < 0.01). Conclusions CMR allows for noninvasive monitoring of acute and chronic changes in PVR in PH. This capability may be valuable in the evaluation and follow-up of patients with PH.
Resumo:
High power density is strongly preferable for the on-board battery charger of Plug-in Hybrid Electric Vehicle (PHEV). Wide band gap devices, such as Gallium Nitride HEMTs are being explored to push to higher switching frequency and reduce passive component size. In this case, the bulk DC link capacitor of AC-DC Power Factor Correction (PFC) stage, which is usually necessary to store ripple power of two times the line frequency in a DC current charging system, becomes a major barrier on power density. If low frequency ripple is allowed in the battery, the DC link capacitance can be significantly reduced. This paper focuses on the operation of a battery charging system, which is comprised of one Full Bridge (FB) AC-DC stage and one Dual Active Bridge (DAB) DC-DC stage, with charging current containing low frequency ripple at two times line frequency, designated as sinusoidal charging. DAB operation under sinusoidal charging is investigated. Two types of control schemes are proposed and implemented in an experimental prototype. It is proved that closed loop current control is the better. Full system test including both FB AC-DC stage and DAB DC-DC stage verified the concept of sinusoidal charging, which may lead to potentially very high power density battery charger for PHEV.
Resumo:
The effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm×100 cm×30 cm) and the other half in alternative polyvalent cages (39 cm×100 cm×60 cm), with a raised platform. Half of the rabbit does in each type of cage were weaned at 32 and the other half at 46 days after parturition. Longer lactation negatively affected the body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9%) and litter weight (by 11.3%) at the end of growing period (P<0.001) and lower feed conversion ratio per cage during the experimental period (13.5%) than weaning at 32 day (P<0.001). These results were paralleled by lower mortality (12.6 vs. 17.6%; P<0.01) of young rabbits weaned later during the overall experimental period. Differences in performance as a result of different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio between 3 and 21 day were 4.2% higher (P<0.01) and 5.0% lower (P<0.05), respectively, in animals housed in alternative rather than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01). It was concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be alternatives to improve animal welfare in farmed rabbit.
Resumo:
The effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conven- tional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cage were weaned at 32 and the other half at 46 days after parturition. Longer lactation negatively affected the body weight ( P o 0.001), fat and energy content ( P o 0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9%) and litter weight (by 11.3%) at the end of growing period ( P o 0.001) and lower feed conversion ratio per cage during the experimental period (13.5%) than weaning at 32 day ( P o 0.001). These results were paralleled by lower mortality (12.6 vs. 17.6%; P o 0.01) of young rabbits weaned later during the overall experimental period. Differences in performance as a result of different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio between 3 and 21 day were 4.2% higher ( P o 0.01) and 5.0% lower ( P o 0.05), respectively, in animals housed in alternative rather than in conventional cages. Alternative cages also led to heavier litters at 59 days ( P o 0.01). It was concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be alternatives to improve animal welfare in farmed rabbit.
Resumo:
The main objetive of this Doctoral Thesis was to study the influence of female castration and pig sex on growth performance and carcass and meat quality of white pigs slaughtered at different final weights. Three experiments (Exp.) were conducted. In Exp. 1, a total of 200 (Landrace * Large White dam x Pietrain * Large White sire) gilts of 50 ± 3 days of age (23.3 ± 1.47 kg BW) was used to investigate the effects of castration (intact females, IF vs. castrated feamles, CF) and slaughter weight (106 vs. 122 kg BW) on productive performance and carcass and meat quality. There were four experimental treatments arranged as a 2 x 2 factorial and 5 replicates of 10 pigs each per treatment. Half of the gilts were ovariectomized at 58 d of age (8 days after the beginning of the trial; 29.8 ± 1.64 kg BW) whereas the other half remained intact. Meat samples were taken at m. Longissimus thoracis at the level of the last rib and subcutaneous fat samples were taken at the tail insertion. For the entire experiment period, CF had higher BW gain (P<0.05) and backfat and m. Gluteus medius (GM) fat thickness (P<0.001) than IF. However, IF had higher loin and trimmed primal cut yields (P<0.05) than CF. Meat quality was similar for IF and CF but the proportion of linoleic acid in subcutaneous fat was higher (P<0.001) for IF. Pigs slaughtered at 122 kg BW had higher (P<0.001) feed intake and poorer feed efficiency than pigs slaughtered at 106 kg BW. An increase in slaughter weight (SW) improved (P<0.001) carcass yield but decreased (P<0.05) trimmed primal cut yield. Meat from females slaughtered at the heavier BW was redder (a*; P<0.001) and had more (P<0.01) intramuscular fat and less thawing (P<0.05) and cooking (P<0.10) loss than meat from females slaughtered at the lighter BW. Also, females slaughtered at 122 kg BW had less (P<0.01) linoleic acid content in the subcutaneous fat than pigs slaughtered at 106 kg BW. Castration of gilts and slaughtering at heavier BW might be useful practices for the production of heavy pigs destined to the dry cured industry in which a certain amount of fat in the carcass is required. In contrast, when the carcasses are destined to fresh meat production, IF slaughtered at 106 kg BW are a more efficient alternative. In Exp. 2, crossbred pigs (n=240) from Pietrain*Large White sires mated to Landrace*Large White dams with an average of 100 d of age (60.5 ± 2.3 kg) were used to investigate the effects of gender and slaughter weight (SW) on growth performance and carcass and meat quality characteristics. There were 6 treatments arranged factorially with 3 genders (IF vs. CF vs.castrated males, CM) and 2 SW (114 vs. 122 kg BW). Each of the 6 combinations of treatments was replicated 4 times and the experimental unit was a pen with 10 pigs. Castrated males and CF ate more feed, grew faster and had more carcass backfat depth and fat thickness at the GM muscle, but lower loin yield than IF (P<0.05). In addition, CF and CM had more intramuscular fat (P<0.05) and less linoleic acid content in the subcutaneous fat (P<0.01) than IF. Pigs slaughtered at 122 kg BW had lower ADG (P<0.05), poor gain-to-feed ratio (P<0.05), and more GM fat than pigs slaughtered at 114 kg BW (P < 0.05). It is concluded that CF and CM had similar productive performance and meat quality characteristics when slaughtered at the same age, and that the castration of females improved daily gains and increased weight and fat content of primal cuts with respect to IF. Therefore, castration of females is recommended in pigs destined to the dry-cured industry because of the beneficial effects on the quality of the primal cuts. In Exp. 3, the effects of gender and castration of females (IF vs. CF vs. CM) on performance and carcass and meat quality were studied in crossbred pigs (Landrace x Large White dams x Duroc sires) slaughtered at 119.2 (trial 1) or 131.6 (trial 2) kg BW. Intact females had better feed conversion and less carcass fat than CF and CM. Trimmed shoulder yield was higher for CM than for CF with IF being intermediate. Primal cut yield and meat quality, however were similar for all treatments. Proportion of linoleic acid in backfat was lower for CF than for IF or CM, and the differences were significant in pigs slaughtered witn 131.6 kg BW. The higher fat content and the fatty acid profile favour the use of CF and CM over IF for the production of heavy pigs destined to the dry-cured industry.
Resumo:
The usage of HTTP adaptive streaming (HAS) has become widely spread in multimedia services. Because it allows the service providers to improve the network resource utilization and user׳s Quality of Experience (QoE). Using this technology, the video playback interruption is reduced since the network and server status in addition to capability of user device, all are taken into account by HAS client to adapt the quality to the current condition. Adaptation can be done using different strategies. In order to provide optimal QoE, the perceptual impact of adaptation strategies from point of view of the user should be studied. However, the time-varying video quality due to the adaptation which usually takes place in a long interval introduces a new type of impairment making the subjective evaluation of adaptive streaming system challenging. The contribution of this paper is two-fold: first, it investigates the testing methodology to evaluate HAS QoE by comparing the subjective experimental outcomes obtained from ACR standardized method and a semi-continuous method developed to evaluate the long sequences. In addition, influence of using audiovisual stimuli to evaluate the video-related impairment is inquired. Second, impact of some of the adaptation technical factors including the quality switching amplitude and chunk size in combination with high range of commercial content type is investigated. The results of this study provide a good insight toward achieving appropriate testing method to evaluate HAS QoE, in addition to designing switching strategies with optimal visual quality.