Newer optics efficiently mix, dim, and color-tune LED light

Low-cost, plastic-injected optics mix light from different color LED dies without a significant decrease in average brightness, simplifying luminaire design both optically and electronically. In solid-state lighting, high-flux and high-color rendering index (CRI) light engines may be achieved by arraying and mixing the light from different color dies or phosphors, or a combination of the two, in the LED package. However, these nonhomogeneous sources, when combined with luminaire optics, tend to produce patterns with undesirable artifacts such as spatial and angular nonuniformities and color separation.

Primary optics for efficient high-brightness LED color mixing

In SSL general illumination, there is a clear trend to high flux packages with higher efficiency and higher CRI addressed with the use of multiple color chips and phosphors. However, such light sources require the optics provide color mixing, both in the near-field and far-field. This design problem is specially challenging for collimated luminaries, in which diffusers (which dramatically reduce the brightness) cannot be applied without enlarging the exit aperture too much. In this work we present first injection molded prototypes of a novel primary shell-shaped optics that have microlenses on both sides to provide Köhler integration. This shell is design so when it is placed on top of an inhomogeneous multichip Lambertian LED, creates a highly homogeneous virtual source (i.e, spatially and angularly mixed), also Lambertian, which is located in the same position with only small increment of the size (about 10-20%, so the average brightness is similar to the brightness of the source). This shell-mixer device is very versatile and permits now to use a lens or a reflector secondary optics to collimate the light as desired, without color separation effects. Experimental measurements have shown optical efficiency of the shell of 95%, and highly homogeneous angular intensity distribution of collimated beams, in good agreement with the ray-tracing simulations.

Material, espacio y color en Mies van der Rohe. Café Samt & Seide: Hacia una Propuesta Estructural

La aparición de varias fotografías del Café Samt & Seide no publicadas hasta 2008 en las que se observaba la luz natural de la exposición; los planos a escala de la nave donde se realizó la exposición textil; y los croquis inéditos de la instalación de la seda localizados durante el transcurso de la Tesis Doctoral por el doctorando en el plano de la Sala de Cristal, han sido las principales aportaciones de la búsqueda documental que ha tenido por objeto el conocimiento espacial e interpretación gráfica del proyecto expositivo realizada durante el transcurso de la Tesis Doctoral para poder profundizar en el alcance de la propuesta protoarquitectónica y, a través de ella, en la obra y pensamiento de Mies van der Rohe. Material, espacio y color son elementos propuestos como capítulos que estructuran la disertación y que son empleados por Mies van der Rohe como factores de una nueva expresión espacial en la exposiciones como ensayos identificados con su idea de arquitectura. En el Café Samt & Seide, Mies van der Rohe y Lilly Reich proponen una sensibilidad en el empleo del material y color trasladada al espacio mediante una atmósfera rítmica y en movimiento de superficies abstraídas e iluminadas. La estructura visual de opuestos nace del doble material textil de la exposición desplegándose en un orden espacial y constructivo de elementos independientes iniciado en los apartamentos de la Colonia Weissenhof y Sala de Cristal de Stuttgart 1926-1927, y que será trasladado desde los espacios experimentales de 1927 a las series de mármoles y cristales del Pabellón Alemán 1928-1929. La síntesis intelectual (arte-ciencia-filosofía) guía el proceso de formalización y la técnica en una intención que será trasladada a su arquitectura en el empleo de la tecnología. La creatividad y repercusión de las vanguardias en la instalación muestra la voluntad integradora de la exposición y arquitectura como arte total. Los aspectos interpretativos de las artes plásticas, visuales y musicales se integran como criterios y sensibilidades aplicadas a las estructuras yuxtapuestas material, espacial y de color. Modernidad y tradición tectónica convergen en este espacio construido cuyas superficies cubren un armazón metálico oculto. La construcción mínima textil será incorporada como idea de forma en la futura construcción del pilar metálico, la pared flotante de sus viviendas y pabellones abiertos a la naturaleza, y la gran fachada tecnológica del espacio público de sus agrupaciones en la ciudad. El espacio total del Café Samt & Seide dentro de la gran nave de Berlín anticipa las exposiciones artísticas e industriales realizadas junto a Lilly Reich en el interior de las espaciosas salas de estructura metálica como instalaciones conceptuales de gravedad y luz antecedentes de los pabellones de grandes dimensiones y espacio universal. Arquitectura, construcción y lugar son integrados en la instalación por el principio estructural como propuesta de una idea de arquitectura que es desarrollada en las exposiciones. Oscilador y bastidor son construcciones escaladas dentro de la gran nave iluminada, expresando el conjunto un orden de partes que reflejan un todo integrado en la naturaleza y lo universal. Las múltiples relaciones espaciales, constructivas y conceptuales de la exposición con su arquitectura desvelan al Café Samt & Seide como un exponente y antecedente de su obra e idea a la que definió como una propuesta estructural. La estructura, entendida como un conjunto de valores culturales y medios técnicos, es el concepto con el que Mies van der Rohe identifica la síntesis intelectualtecnológica de su tiempo, constituyendo la finalidad de su expresión material, espacial y de color. ABSTRACT The unpublished pictures of the Café Samt & Seide appeared in 2008 in which the natural light in the exhibition can be seen; the scaled plan of the nave where the textile exhibition was held; and the unpublished sketches of the silk exhibition located by the doctoral candidate while preparing his dissertation have been the main input of the data search aiming at a better understanding of the space and a graphic interpretation of the exhibition project made by the doctoral candidate during the dissertation as a basic requirement to deepen in the scope of this protoarchitectural proposal and, though it, into Mies van der Rohe’s work and thinking. Material, space and colour are the elements put forward as the chapters structuring this dissertation and were used by Mies van der Rohe as factors of a new spatial expression in expositions as tests identified with his idea of architecture. In Café Samt & Seide, Mies van der Rohe and Lilly Reich present material and colour sensitivity transferred to space though a rhythmic and moving atmosphere made up by abstracted and lit surfaces. Such a visual grammar and oppositions unfolds into a space and constructive order of independent elements originated with the apartments of the Weissenhof Colony and Glass Room in Stuttgart 1926-1927, and which were transferred these test spaces 1927 to the series of marble and glass in the German Pavilion 1928-1929. The intellectual and formal will (art-science-philosophy) guides the technical expression, which is transferred to architecture through technology. The creativity and impact of avant-gardes in the installation reflects exhibition and architecture’s will to integrate as a Total Art. The interpretative aspects of plastic, visual and musical arts are part of a sensitivity applied to the overlapped structures of material, space and colour. Tectonic modernity and tradition converge in this space built with surfaces covering a hidden metal framework. The minimal textile construction is integrated as a shape idea in his subsequent construction of the metal pillar, floating wall in his housing and pavilions open to nature, and the great technological façade of the public space of his urban clusters. The total space of the exhibition inside the great nave in Berlin anticipates the artistic and industrial exhibitions done together with Lilly Reich inside the spacious Halls built with exposed metal structures as conceptual installation of gravity and light prior to the big-dimensioned pavilions and universal space. Architecture, construction and place are integrated by the structural principle. Oscillator and framework are scaled constructions integrated inside the great, lit nave, and the whole conveys order of its parts reflecting a whole integrated in nature and the universal. The many conceptual, space and constructive link of the textile exhibition to his European and American architecture add a greater knowledge of the time when Mies van der Rohe stated he gained a “new awareness” 1926, revealing Café Samt & Seide as a valuable example and the experimental precursor of his work and idea defined by himself as a “structural proposal”. The structure, understood as a set of cultural and material values expressed by architecture, is the notion used by Mies van der Rohe to identify the intellectual-technological synthesis as the idea of a time and which is the goal of its material, space and colour expression.

Linear color correction for multiple illumination changes and non-overlapping cameras

Many image processing methods, such as techniques for people re-identification, assume photometric constancy between different images. This study addresses the correction of photometric variations based upon changes in background areas to correct foreground areas. The authors assume a multiple light source model where all light sources can have different colours and will change over time. In training mode, the authors learn per-location relations between foreground and background colour intensities. In correction mode, the authors apply a double linear correction model based on learned relations. This double linear correction includes a dynamic local illumination correction mapping as well as an inter-camera mapping. The authors evaluate their illumination correction by computing the similarity between two images based on the earth mover's distance. The authors compare the results to a representative auto-exposure algorithm found in the recent literature plus a colour correction one based on the inverse-intensity chromaticity. Especially in complex scenarios the authors’ method outperforms these state-of-the-art algorithms.

Merit function for the evaluation of color uniformity in the far field of LED spot lights

The scope of the present paper is the derivation of a merit function which predicts the visual perception of LED spot lights. The color uniformity level Usl is described by a linear regression function of the spatial color distribution in the far field. Hereby, the function is derived from four basic functions. They describe the color uniformity of spot lights through different features. The result is a reliable prediction for the perceived color uniformity in spot lights. A human factor experiment was performed to evaluate the visual preferences for colors and patterns. A perceived rank order was derived from the subjects’ answers and compared with the four basic functions. The correlation between the perceived rank order and the basic functions was calculated resulting in the definition of the merit function Usl. The application of this function is shown by a comparison of visual evaluations and measurements of LED retrofit spot lamps. The results enable a prediction of color uniformity levels of simulations and measurements concerning the visual perception. The function provides a possibility to evaluate the far field of spot lights without individual subjective judgment. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Optimization of optical systems for LED spot lights concerning the color uniformity

Spotlighting is one illumination field where the application of light emitting diodes (LED) creates many advantages. Commonly, the system for spot lights consists of a LED light engine and collimating secondary optics. Through angular or spatial separated emitted light from the source and imaging optical elements, a non uniform far field appears with colored rings, dots or patterns. Many feasible combinations result in very different spatial color distributions. Several combinations of three multi-chip light sources and secondary optical elements like reflectors and TIR lenses with additional facets or scattering elements were analyzed mainly regarding the color uniformity. They are assessed by the merit function Usl which was derived from human factor experiments and describes the color uniformity based on the visual perception of humans. Furthermore, the optical systems are compared concerning efficiency, peak candela and aspect ratio. Both types of optics differ in the relation between the color uniformity level and other properties. A plain reflector with a slightly color mixing light source performs adequate. The results for the TIR lenses indicate that they need additional elements for good color mixing or blended light source. The most convenient system depends on the requirements of the application.

Color uniformity in spotligths - visual perception and system design

La iluminación con diodos emisores de luz (LED) está reemplazando cada vez en mayor medida a las fuentes de luz tradicionales. La iluminación LED ofrece ventajas en eficiencia, consumo de energía, diseño, tamaño y calidad de la luz. Durante más de 50 años, los investigadores han estado trabajando en mejoras LED. Su principal relevancia para la iluminación está aumentando rápidamente. Esta tesis se centra en un campo de aplicación importante, como son los focos. Se utilizan para enfocar la luz en áreas definidas, en objetos sobresalientes en condiciones profesionales. Esta iluminación de alto rendimiento requiere una calidad de luz definida, que incluya temperaturas ajustables de color correlacionadas (CCT), de alto índice de reproducción cromática (CRI), altas eficiencias, y colores vivos y brillantes. En el paquete LED varios chips de diferentes colores (rojo, azul, fósforo convertido) se combinan para cumplir con la distribución de energía espectral con alto CRI. Para colimar la luz en los puntos concretos deseados con un ángulo de emisión determinado, se utilizan blancos sintonizables y diversos colores de luz y ópticas secundarias. La combinación de una fuente LED de varios colores con elementos ópticos puede causar falta de homogeneidad cromática en la distribución espacial y angular de la luz, que debe resolverse en el diseño óptico. Sin embargo, no hay necesidad de uniformidad perfecta en el punto de luz debido al umbral en la percepción visual del ojo humano. Por lo tanto, se requiere una descripción matemática del nivel de uniformidad del color con respecto a la percepción visual. Esta tesis está organizada en siete capítulos. Después de un capítulo inicial que presenta la motivación que ha guiado la investigación de esta tesis, en el capítulo 2 se presentan los fundamentos científicos de la uniformidad del color en luces concentradas, como son: el espacio de color aplicado CIELAB, la percepción visual del color, los fundamentos de diseño de focos respecto a los motores de luz y ópticas no formadoras de imágenes, y los últimos avances en la evaluación de la uniformidad del color en el campo de los focos. El capítulo 3 desarrolla diferentes métodos para la descripción matemática de la distribución espacial del color en un área definida, como son la diferencia de color máxima, la desviación media del color, el gradiente de la distribución espacial de color, así como la suavidad radial y axial. Cada función se refiere a los diferentes factores que influyen en la visión, los cuales necesitan un tratamiento distinto que el de los datos que se tendrán en cuenta, además de funciones de ponderación que pre- y post-procesan los datos simulados o medidos para la reducción del ruido, la luminancia de corte, la aplicación de la ponderación de luminancia, la función de sensibilidad de contraste, y la función de distribución acumulativa. En el capítulo 4, se obtiene la función de mérito Usl para la estimación de la uniformidad del color percibida en focos. Se basó en los resultados de dos conjuntos de experimentos con factor humano realizados para evaluar la percepción visual de los sujetos de los patrones de focos típicos. El primer experimento con factor humano dio lugar al orden de importancia percibida de los focos. El orden de rango percibido se utilizó para correlacionar las descripciones matemáticas de las funciones básicas y la función ponderada sobre la distribución espacial del color, que condujo a la función Usl. El segundo experimento con factor humano probó la percepción de los focos bajo condiciones ambientales diversas, con el objetivo de proporcionar una escala absoluta para Usl, para poder así sustituir la opinión subjetiva personal de los individuos por una función de mérito estandarizada. La validación de la función Usl se presenta en relación con el alcance de la aplicación y condiciones, así como las limitaciones y restricciones que se realizan en el capítulo 5. Se compararon los datos medidos y simulados de varios sistemas ópticos. Se discuten los campos de aplicación , así como validaciones y restricciones de la función. El capítulo 6 presenta el diseño del sistema de focos y su optimización. Una evaluación muestra el análisis de sistemas basados en el reflector y la lente TIR. Los sistemas ópticos simulados se comparan en la uniformidad del color Usl, sensibilidad a las sombras coloreadas, eficiencia e intensidad luminosa máxima. Se ha comprobado que no hay un sistema único que obtenga los mejores resultados en todas las categorías, y que una excelente uniformidad de color se pudo alcanzar por la conjunción de dos sistemas diferentes. Finalmente, el capítulo 7 presenta el resumen de esta tesis y la perspectiva para investigar otros aspectos. ABSTRACT Illumination with light-emitting diodes (LED) is more and more replacing traditional light sources. They provide advantages in efficiency, energy consumption, design, size and light quality. For more than 50 years, researchers have been working on LED improvements. Their main relevance for illumination is rapidly increasing. This thesis is focused on one important field of application which are spotlights. They are used to focus light on defined areas, outstanding objects in professional conditions. This high performance illumination required a defined light quality including tunable correlated color temperatures (CCT), high color rendering index (CRI), high efficiencies and bright, vivid colors. Several differently colored chips (red, blue, phosphor converted) in the LED package are combined to meet spectral power distribution with high CRI, tunable white and several light colors and secondary optics are used to collimate the light into the desired narrow spots with defined angle of emission. The combination of multi-color LED source and optical elements may cause chromatic inhomogeneities in spatial and angular light distribution which needs to solved at the optical design. However, there is no need for perfect uniformity in the spot light due to threshold in visual perception of human eye. Therefore, a mathematical description of color uniformity level with regard to visual perception is required. This thesis is organized seven seven chapters. After an initial one presenting the motivation that has guided the research of this thesis, Chapter 2 introduces the scientific basics of color uniformity in spot lights including: the applied color space CIELAB, the visual color perception, the spotlight design fundamentals with regards to light engines and nonimaging optics, and the state of the art for the evaluation of color uniformity in the far field of spotlights. Chapter 3 develops different methods for mathematical description of spatial color distribution in a defined area, which are the maximum color difference, the average color deviation, the gradient of spatial color distribution as well as the radial and axial smoothness. Each function refers to different visual influencing factors, and they need different handling of data be taken into account, along with weighting functions which pre- and post-process the simulated or measured data for noise reduction, luminance cutoff, the implementation of luminance weighting, contrast sensitivity function, and cumulative distribution function. In chapter 4, the merit function Usl for the estimation of the perceived color uniformity in spotlights is derived. It was based on the results of two sets of human factor experiments performed to evaluate the visual perception of typical spotlight patterns by subjects. The first human factor experiment resulted in the perceived rank order of the spotlights. The perceived rank order was used to correlate the mathematical descriptions of basic functions and weighted function concerning the spatial color distribution, which lead to the Usl function. The second human factor experiment tested the perception of spotlights under varied environmental conditions, with to objective to provide an absolute scale for Usl, so the subjective personal opinion of individuals could be replaced by a standardized merit function. The validation of the Usl function is presented concerning the application range and conditions as well as limitations and restrictions in carried out in chapter 5. Measured and simulated data of various optical several systems were compared. Fields of applications are discussed as well as validations and restrictions of the function. Chapter 6 presents spotlight system design and their optimization. An evaluation shows the analysis of reflector-based and TIR lens systems. The simulated optical systems are compared in color uniformity Usl , sensitivity to colored shadows, efficiency, and peak luminous intensity. It has been found that no single system which performed best in all categories, and that excellent color uniformity could be reached by two different system assemblies. Finally, chapter 7 summarizes the conclusions of the present thesis and an outlook for further investigation topics.

El color en la transfiguración del espacio: un estudio empírico de los dispositivos de transformación y configuración

La presente investigación analiza la capacidad del color de cualificar los espacios y propone una clasificación que ordene los diferentes dispositivos que actúan en este proceso. El objetivo de esta tesis es describir estos dispositivos estableciéndolos como parte inequívoca de cualquier proceso desencadenado por la presencia del binomio luz y color. El color ha sido objeto de estudio y experimentación a lo largo de la historia, en todas las artes y las distintas disciplinas relacionadas con la física, la percepción y la interacción. De este modo se realiza una aproximación teórica e histórica al color desde puntos de vista interdisciplinares, para llegar a comprender el modo en el que el color se acaba separando de la forma para pasar a formar parte de la configuración del espacio. Con el propósito de alcanzar este objetivo, se ha realizado un recorrido a través de diferentes teorías y manifestaciones artísticas realizadas en torno al color a lo largo de la Historia, para encontrar las claves de la relación del color con el espacio. Tomando de base este primer acercamiento al tema, se realiza un estudio empírico exhaustivo con modelos físicos con el fin de aislar los dispositivos que intervienen el este proceso en el que el color se pone en relación con el espacio; se analiza su variación a medida que fluctúan las características de los elementos que desencadenan los dispositivos. El objetivo es descubrir un orden, una taxonomía, que permita interpretar cualquier transformación producida por el color en el espacio. Posteriormente, se verifica la validez de esta clasificación estudiando siete espacios modelo en los que el color transfigura el espacio mediante la activación conjunta de varios de los dispositivos analizados. Se ha elegido este grupo de siete espacios debido a que, al tomarlos como suma, sus interiores engloban todos los fenómenos encontrados en el análisis previo. El conjunto de los dispositivos que actúan en cada espacio forma un sistema único e irrepetible que tiene que ver con su transfiguración espacial mediante la luz y el color. Estos sistemas constituyen parte de la génesis propia de cada espacio a través de una secuencia de dispositivos de transformación y configuración espacial que lo hace singular. Los dispositivos clasificados en esta investigación se encuentran en cualquier espacio en el que intervengan la luz y el color, agrupándose secuencialmente en sistemas determinados que cualifican el espacio arquitectónico. ABSTRACT This research analyzes the ability of the colour to qualify the spaces and proposes a classification to arrange the different devices that act in this process. The aim of this thesis is to describe these devices, unequivocally established as part of any process triggered by the presence of light and color pairing. Colour has been the subject of study and experimentation throughout history, in all the arts and disciplines related to physics, perception and interaction. Thus a theoretical and historical approach to the colour is developed from interdisciplinary points of view, in order to understand the way that colour separates from the form and is part of the space configuration. With the purpose of reaching this target, there has been a journey through the artistic movements and theories on colour throughout history, seeking for the key points of its relation with the space. Based on these first intuitions as a starting point, an exhaustive empirical study is made with physical models with the purpose of isolating the devices that participate in this process where colour is related with the space as well as analyzing their variation to the extent that the characteristics of the elements which cause them fluctuate. The objective is to discover an order, a taxonomy that allows to performing any transformation produced by the colour in the space. Afterwards, the validity of this classification is verified by studying seven model spaces in which the colour transfigures the space by the combined activation of several analyzed devices. These seven spaces were chosen due to all the phenomenon set in the previous analysis are included in their interior space. The group of devices that act on each space creates an unrepeatable and unique system that has to do with its spatial transfiguration by means of light and colour. These systems form part of the origin itself of each space through a sequence of devices of spatial transformation and configuration that make this space unique. The devices sorted in this research transform and configure any space in which light and colour participate, sequentially grouping together in determined systems that qualify the architectonic space.