Development of Interactive Materials by Engineering Students Using the Descartes Applets.

In a degree course such as Forestry Engineering, the general teaching objectives consist of explaining and helping students to understand the principles of Mechanics. For some time now we have encountered significant difficulties in teaching this subject due to the students' lack of motivation and to their insufficient prior preparation for the topic. If we add to this the discipline's inherent complexity and the students' preconceptions about the subject, these teaching difficulties become considerable. For this reason a series of didactic activities have been introduced sequentially in the teaching of this subject. This work describes the methodology, procedure and results for the action of developing a work project in groups using Descartes software. The results of this experiment can be considered very positive. Some of the critical preconceptions for learning the subject can be corrected, and the tutoring process in the classroom contributes to an improvement in teacherstudent communication. Since this scheme was established, the number of students taking part each academic year has increased, and this is the group with the greatest percentage of passing scores.

Tools in Spanish Universities to facilitate the transmission from High School to University and their assessment.

Incoming students in the University have education deficiencies, so universities studies require a sound basis of scientific knowledge. In this project are analysed instruments to reinforcing knowledge in those areas related to the studies that students are about to embark on public Spanish universities. There are important differences among universities and, in each university there are great differences among titles. Initial courses (cursos cero) are widespread (in 50% of universities) that selfevaluation instruments (14 % of universities). It is necessary to improve diffusion of those instruments because it is not possible to evaluate them. So are proposed the next actuations: to make regular standard surveys for professors and students; to publish results of surveys; public universities should institutionalize their basic training offer and improve the dissemination of this offer especially through the web. This paper presents a questionnaire to assess student opinion about these tools. To analyze the effectiveness, and make an initial estimate of the evaluation of these tools, we conducted a pilot test of the questionnaire with 68 students at the University of Extremadura. The results of preliminary statistical analysis conducted on the pilot test indicate that the survey results are reliable. A global evaluation of both tools, with a scale of 1 to 5, gave an average score of 3.29 for initial courses and 3.41 for selfevaluation. The 72.9% of the students consider the "self assessment" more effective than the "initial course"

Improving the capacity of software acquisition management: An Alternative methodology

The acquisition of the information system technologies using the services of an external supplier could be the the best options to reduce the implementation and maintenance cost of software solutions, and allows a company to improve the efficient use of its resources. The focus of this paper is to outline a methodology structure for the software acquisition management. The methodology proposed in this paper is the result of the study and the convergence of the weakness and strengths of some models (CMMI, SA-CMM, ISO/IEC TR 15504, COBIT, and ITIL) that include the software acquisition process.

Herramienta basada en vistas para la generación automática de anotaciones de fuentes RDF

Durante los últimos años, el imparable crecimiento de fuentes de datos biomédicas, propiciado por el desarrollo de técnicas de generación de datos masivos (principalmente en el campo de la genómica) y la expansión de tecnologías para la comunicación y compartición de información ha propiciado que la investigación biomédica haya pasado a basarse de forma casi exclusiva en el análisis distribuido de información y en la búsqueda de relaciones entre diferentes fuentes de datos. Esto resulta una tarea compleja debido a la heterogeneidad entre las fuentes de datos empleadas (ya sea por el uso de diferentes formatos, tecnologías, o modelizaciones de dominios). Existen trabajos que tienen como objetivo la homogeneización de estas con el fin de conseguir que la información se muestre de forma integrada, como si fuera una única base de datos. Sin embargo no existe ningún trabajo que automatice de forma completa este proceso de integración semántica. Existen dos enfoques principales para dar solución al problema de integración de fuentes heterogéneas de datos: Centralizado y Distribuido. Ambos enfoques requieren de una traducción de datos de un modelo a otro. Para realizar esta tarea se emplean formalizaciones de las relaciones semánticas entre los modelos subyacentes y el modelo central. Estas formalizaciones se denominan comúnmente anotaciones. Las anotaciones de bases de datos, en el contexto de la integración semántica de la información, consisten en definir relaciones entre términos de igual significado, para posibilitar la traducción automática de la información. Dependiendo del problema en el que se esté trabajando, estas relaciones serán entre conceptos individuales o entre conjuntos enteros de conceptos (vistas). El trabajo aquí expuesto se centra en estas últimas. El proyecto europeo p-medicine (FP7-ICT-2009-270089) se basa en el enfoque centralizado y hace uso de anotaciones basadas en vistas y cuyas bases de datos están modeladas en RDF. Los datos extraídos de las diferentes fuentes son traducidos e integrados en un Data Warehouse. Dentro de la plataforma de p-medicine, el Grupo de Informática Biomédica (GIB) de la Universidad Politécnica de Madrid, en el cuál realicé mi trabajo, proporciona una herramienta para la generación de las necesarias anotaciones de las bases de datos RDF. Esta herramienta, denominada Ontology Annotator ofrece la posibilidad de generar de manera manual anotaciones basadas en vistas. Sin embargo, aunque esta herramienta muestra las fuentes de datos a anotar de manera gráfica, la gran mayoría de usuarios encuentran difícil el manejo de la herramienta , y pierden demasiado tiempo en el proceso de anotación. Es por ello que surge la necesidad de desarrollar una herramienta más avanzada, que sea capaz de asistir al usuario en el proceso de anotar bases de datos en p-medicine. El objetivo es automatizar los procesos más complejos de la anotación y presentar de forma natural y entendible la información relativa a las anotaciones de bases de datos RDF. Esta herramienta ha sido denominada Ontology Annotator Assistant, y el trabajo aquí expuesto describe el proceso de diseño y desarrollo, así como algunos algoritmos innovadores que han sido creados por el autor del trabajo para su correcto funcionamiento. Esta herramienta ofrece funcionalidades no existentes previamente en ninguna otra herramienta del área de la anotación automática e integración semántica de bases de datos. ---ABSTRACT---Over the last years, the unstoppable growth of biomedical data sources, mainly thanks to the development of massive data generation techniques (specially in the genomics field) and the rise of the communication and information sharing technologies, lead to the fact that biomedical research has come to rely almost exclusively on the analysis of distributed information and in finding relationships between different data sources. This is a complex task due to the heterogeneity of the sources used (either by the use of different formats, technologies or domain modeling). There are some research proyects that aim homogenization of these sources in order to retrieve information in an integrated way, as if it were a single database. However there is still now work to automate completely this process of semantic integration. There are two main approaches with the purpouse of integrating heterogeneous data sources: Centralized and Distributed. Both approches involve making translation from one model to another. To perform this task there is a need of using formalization of the semantic relationships between the underlying models and the main model. These formalizations are also calles annotations. In the context of semantic integration of the information, data base annotations consist on defining relations between concepts or words with the same meaning, so the automatic translation can be performed. Depending on the task, the ralationships can be between individuals or between whole sets of concepts (views). This paper focuses on the latter. The European project p-medicine (FP7-ICT-2009-270089) is based on the centralized approach. It uses view based annotations and RDF modeled databases. The data retireved from different data sources is translated and joined into a Data Warehouse. Within the p-medicine platform, the Biomedical Informatics Group (GIB) of the Polytechnic University of Madrid, in which I worked, provides a software to create annotations for the RDF sources. This tool, called Ontology Annotator, is used to create annotations manually. However, although Ontology Annotator displays the data sources graphically, most of the users find it difficult to use this software, thus they spend too much time to complete the task. For this reason there is a need to develop a more advanced tool, which would be able to help the user in the task of annotating p-medicine databases. The aim is automating the most complex processes of the annotation and display the information clearly and easy understanding. This software is called Ontology Annotater Assistant and this book describes the process of design and development of it. as well as some innovative algorithms that were designed by the author of the work. This tool provides features that no other software in the field of automatic annotation can provide.

A language exchange program: sustainability innovation in language and culture engagement

Spanish Educational Laws have been promoting the widespread use of English; as a result, Spanish Uni versities are looking for ways to give students more international training in order to prepare them for a future that will increasingly involve global problems and partnerships. Therefore, the Polytechnic University of Madrid, Spain (UPM), and the University of British Columbia, Okanagan, Canada (UBCO) have come together to offer opportunities for international collaboration and learning, thus facilitating virtual encounters among Spanish and Canadian students. The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages, such as autonomous and life-long learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process. Additionally the ‘virtual’ mobility is provided at no extra cost. This article presents the preliminary results of two virtual exchange programs that have been offering varied forms of study which are venue-independent, and have clearly expanded the range of scenarios for the students on both sides by promoting collaborative work and cultural exchange.

Learning&Information Technologies Cartography

Nowadays, many researches focus their efforts in studies and applications on the Learning area. However, there is a lack of a reference system that permits to know the positioning and the existing links between Learning and Information Technologies. This paper proposes a Cartography where explains the relationships between the elements that compose the Learning Theories and Information Technologies, considering the own features of the learner and the Information Technologies Properties. This intersection will allow us to know what Information Technologies Properties promote Learning Futures.

Heart Failure Monitoring System Based on Wearable and Information Technologies

In Europe, Cardiovascular Diseases (CVD) are the leading source of death, causing 45% of all deceases. Besides, Heart Failure, the paradigm of CVD, mainly affects people older than 65. In the current aging society, the European MyHeart Project was created, whose mission is to empower citizens to fight CVD by leading a preventive lifestyle and being able to be diagnosed at an early stage. This paper presents the development of a Heart Failure Management System, based on daily monitoring of Vital Body Signals, with wearable and mobile technologies, for the continuous assessment of this chronic disease. The System makes use of the latest technologies for monitoring heart condition, both with wearable garments (e.g. for measuring ECG and Respiration); and portable devices (such as Weight Scale and Blood Pressure Cuff) both with Bluetooth capabilities

Towards a conceptual remodeling of information technologies based on a broad consideration of complexity

Actas.

A Complexity Architecture for Information Technologies: a Three-Year Didactic Experiment

One medium-term strategy for helping in the management of complexity is the introduction of a conceptual complexity component in the very centre of university curricula. In very few areas is the growth of complexity as evident as in the information technologies (ITs), the focus of the work presented in the current paper. We have therefore developed an integrated way of tackling the specific field of information technologies by means of an approach,to complexity. The content of this paper describes the guidelines of our research effort, placing an emphasis on informatics. Concepts of complexity based on the system metaphor have been substantially drawn upon in this exercise and are thus presented in some detail. Also described is a didactic experiment conducted by the author and designed to provide a new and integrating approach to University curricula for future professionals. The students' "discovery" of complexity is the focal point of the experiment. The findings of this effort are encouraging and call for the continuation and expansion of this experiment.

Assessment of Underground Wine Cellars Using Geographic Information Technologies

Geographic information technologies (GIT) are essential to many fields of research, such as the preservation and dissemination of cultural heritage buildings, a category which includes traditional underground wine cellars. This article presents a methodology based on research carried out on this type of rural heritage building. The data were acquired using the following sensors: EDM, total station, close-range photogrammetry and laser scanning, and subsequently processed with a specific software which was verified for each case, in order to obtain a satisfactory graphic representation of these underground wine cellars. Two key aspects of this work are the accuracy of the data processing and the visualization of these traditional constructions. The methodology includes an application for geovisualizing these traditional constructions on mobile devices in order to contribute to raising awareness of this unique heritage.

Metadata Visualization of Cultural Heritage Information within a Collaborative Environment

Cultural content on the Web is available in various domains (cultural objects, datasets, geospatial data, moving images, scholarly texts and visual resources), concerns various topics, is written in different languages, targeted to both laymen and experts, and provided by different communities (libraries, archives museums and information industry) and individuals (Figure 1). The integration of information technologies and cultural heritage content on the Web is expected to have an impact on everyday life from the point of view of institutions, communities and individuals. In particular, collaborative environment scan recreate 3D navigable worlds that can offer new insights into our cultural heritage (Chan 2007). However, the main barrier is to find and relate cultural heritage information by end-users of cultural contents, as well as by organisations and communities managing and producing them. In this paper, we explore several visualisation techniques for supporting cultural interfaces, where the role of metadata is essential for supporting the search and communication among end-users (Figure 2). A conceptual framework was developed to integrate the data, purpose, technology, impact, and form components of a collaborative environment, Our preliminary results show that collaborative environments can help with cultural heritage information sharing and communication tasks because of the way in which they provide a visual context to end-users. They can be regarded as distributed virtual reality systems that offer graphically realised, potentially infinite, digital information landscapes. Moreover, collaborative environments also provide a new way of interaction between an end-user and a cultural heritage data set. Finally, the visualisation of metadata of a dataset plays an important role in helping end-users in their search for heritage contents on the Web.

Improving Speech Interaction in Vehicles Using Context-Aware Information through A SCXML Framework

Speech Technologies can provide important benefits for the development of more usable and safe in-vehicle human-machine interactive systems (HMIs). However mainly due robustness issues, the use of spoken interaction can entail important distractions to the driver. In this challenging scenario, while speech technologies are evolving, further research is necessary to explore how they can be complemented with both other modalities (multimodality) and information from the increasing number of available sensors (context-awareness). The perceived quality of speech technologies can significantly be increased by implementing such policies, which simply try to make the best use of all the available resources; and the in vehicle scenario is an excellent test-bed for this kind of initiatives. In this contribution we propose an event-based HMI design framework which combines context modelling and multimodal interaction using a W3C XML language known as SCXML. SCXML provides a general process control mechanism that is being considered by W3C to improve both voice interaction (VoiceXML) and multimodal interaction (MMI). In our approach we try to anticipate and extend these initiatives presenting a flexible SCXML-based approach for the design of a wide range of multimodal context-aware HMI in-vehicle interfaces. The proposed framework for HMI design and specification has been implemented in an automotive OSGi service platform, and it is being used and tested in the Spanish research project MARTA for the development of several in-vehicle interactive applications.

Infrastructure and Workflow for the Formal Evaluation of Semantic Search Technologies

This paper describes an infrastructure for the automated evaluation of semantic technologies and, in particular, semantic search technologies. For this purpose, we present an evaluation framework which follows a service-oriented approach for evaluating semantic technologies and uses the Business Process Execution Language (BPEL) to define evaluation workflows that can be executed by process engines. This framework supports a variety of evaluations, from different semantic areas, including search, and is extendible to new evaluations. We show how BPEL addresses this diversity as well as how it is used to solve specific challenges such as heterogeneity, error handling and reuse

Using SCXML to integrate semantic sensor information into context-aware user interfaces

This paper describes a novel architecture to introduce automatic annotation and processing of semantic sensor data within context-aware applications. Based on the well-known state-charts technologies, and represented using W3C SCXML language combined with Semantic Web technologies, our architecture is able to provide enriched higher-level semantic representations of user’s context. This capability to detect and model relevant user situations allows a seamless modeling of the actual interaction situation, which can be integrated during the design of multimodal user interfaces (also based on SCXML) for them to be adequately adapted. Therefore, the final result of this contribution can be described as a flexible context-aware SCXML-based architecture, suitable for both designing a wide range of multimodal context-aware user interfaces, and implementing the automatic enrichment of sensor data, making it available to the entire Semantic Sensor Web

Semantic technologies in idea management systems: a model for interoperability, linking and filtering

Abstract Idea Management Systems are web applications that implement the notion of open innovation though crowdsourcing. Typically, organizations use those kind of systems to connect to large communities in order to gather ideas for improvement of products or services. Originating from simple suggestion boxes, Idea Management Systems advanced beyond collecting ideas and aspire to be a knowledge management solution capable to select best ideas via collaborative as well as expert assessment methods. In practice, however, the contemporary systems still face a number of problems usually related to information overflow and recognizing questionable quality of submissions with reasonable time and effort allocation. This thesis focuses on idea assessment problem area and contributes a number of solutions that allow to filter, compare and evaluate ideas submitted into an Idea Management System. With respect to Idea Management System interoperability the thesis proposes theoretical model of Idea Life Cycle and formalizes it as the Gi2MO ontology which enables to go beyond the boundaries of a single system to compare and assess innovation in an organization wide or market wide context. Furthermore, based on the ontology, the thesis builds a number of solutions for improving idea assessment via: community opinion analysis (MARL), annotation of idea characteristics (Gi2MO Types) and study of idea relationships (Gi2MO Links). The main achievements of the thesis are: application of theoretical innovation models for practice of Idea Management to successfully recognize the differentiation between communities, opinion metrics and their recognition as a new tool for idea assessment, discovery of new relationship types between ideas and their impact on idea clustering. Finally, the thesis outcome is establishment of Gi2MO Project that serves as an incubator for Idea Management solutions and mature open-source software alternatives for the widely available commercial suites. From the academic point of view the project delivers resources to undertake experiments in the Idea Management Systems area and managed to become a forum that gathered a number of academic and industrial partners. Resumen Los Sistemas de Gestión de Ideas son aplicaciones Web que implementan el concepto de innovación abierta con técnicas de crowdsourcing. Típicamente, las organizaciones utilizan ese tipo de sistemas para conectar con comunidades grandes y así recoger ideas sobre cómo mejorar productos o servicios. Los Sistemas de Gestión de Ideas lian avanzado más allá de recoger simplemente ideas de buzones de sugerencias y ahora aspiran ser una solución de gestión de conocimiento capaz de seleccionar las mejores ideas por medio de técnicas colaborativas, así como métodos de evaluación llevados a cabo por expertos. Sin embargo, en la práctica, los sistemas contemporáneos todavía se enfrentan a una serie de problemas, que, por lo general, están relacionados con la sobrecarga de información y el reconocimiento de las ideas de dudosa calidad con la asignación de un tiempo y un esfuerzo razonables. Esta tesis se centra en el área de la evaluación de ideas y aporta una serie de soluciones que permiten filtrar, comparar y evaluar las ideas publicadas en un Sistema de Gestión de Ideas. Con respecto a la interoperabilidad de los Sistemas de Gestión de Ideas, la tesis propone un modelo teórico del Ciclo de Vida de la Idea y lo formaliza como la ontología Gi2MO que permite ir más allá de los límites de un sistema único para comparar y evaluar la innovación en un contexto amplio dentro de cualquier organización o mercado. Por otra parte, basado en la ontología, la tesis desarrolla una serie de soluciones para mejorar la evaluación de las ideas a través de: análisis de las opiniones de la comunidad (MARL), la anotación de las características de las ideas (Gi2MO Types) y el estudio de las relaciones de las ideas (Gi2MO Links). Los logros principales de la tesis son: la aplicación de los modelos teóricos de innovación para la práctica de Sistemas de Gestión de Ideas para reconocer las diferenciasentre comu¬nidades, métricas de opiniones de comunidad y su reconocimiento como una nueva herramienta para la evaluación de ideas, el descubrimiento de nuevos tipos de relaciones entre ideas y su impacto en la agrupación de estas. Por último, el resultado de tesis es el establecimiento de proyecto Gi2MO que sirve como incubadora de soluciones para Gestión de Ideas y herramientas de código abierto ya maduras como alternativas a otros sistemas comerciales. Desde el punto de vista académico, el proyecto ha provisto de recursos a ciertos experimentos en el área de Sistemas de Gestión de Ideas y logró convertirse en un foro que reunión para un número de socios tanto académicos como industriales.