Multiservice capacity and interference statistics of the uplink of high altitude platforms (HAPs) for asynchronous and synchronous WCDMA system

In this work, the capacity and the interference statistics of the uplink of high-altitude platforms (HAPs) for asynchronous and synchronous WCDMA system assuming finite transmission power and imperfect power control are studied. Propagation loss used to calculate the received signal power is due to the distance, shadowing, and wall insertion loss. The uplink capacity for 3- and 3.75-G services is given for different cell radius assuming outdoor and indoor voice users only, data users only and a combination of the two services. For 37 macrocells HAP, the total uplink capacity is 3,034 outdoor voice users or 444 outdoor data users. When one or more than one user is an indoor user, the uplink capacity is 2,923 voice users or 444 data users when the walls entry loss is 10 dB. It is shown that the effect of the adjacent channels interference is very small.

Impacto en la seguridad operacional por la introducción de nuevos procedimientos en cabina debido a la implantación de futuros conceptos de separación entre aeronaves en la fase de vuelos en ruta

A menudo, la fase del vuelo en ruta sobre áreas de baja densidad de tráfico, se desarrollan en espacios aéreos de alta cota, en los que el servicio de vigilancia es deficiente o simplemente no existente. En este tipo de espacio aéreo garantizar las separaciones entre aeronaves desde el segmento terrestre requiere de procedimientos adecuados a los medios disponibles y que, en general, desembocan en la utilización de unas mínimas de separación muy grandes. En este tipo de espacio aéreo, se ha planteado desde distintos organismos la posibilidad de delegar la responsabilidad de la separación a la aeronave, desarrollando ésta las funciones necesarias para poder asumir tal responsabilidad sin disminuir los umbrales de seguridad. Para que la aeronave pueda asumir la responsabilidad de la separación es necesario dotar a las tripulaciones de nuevos medios técnicos y procedimientos operacionales, los cuales trabajando de forma continua y automática permitan el desarrollo seguro del vuelo en esas circunstancias. El planteamiento de algunos de estos sistemas embarcados así como su validación desde el punto de vista de su aceptación por las tripulaciones es el objetivo del trabajo de investigación realizado y cuyos resultados se presentan en esta tesis. El sistema que se propone trata de resolver los riesgos con los tráficos circundantes garantizando la auto‐separación en vuelo de crucero, evitando y resolviendo conflictos. La aeronave que detecta un riesgo/conflicto negocia una propuesta de solución con la aeronave “intrusa”, una vez la propuesta ha sido negociada, el piloto confirma la maniobra a realizar por la aeronave, la aeronave radiodifunde un mensaje con las intenciones de la maniobra, seguidamente el piloto automático maniobra el avión para implementar la solución y el director de vuelo muestra al piloto la maniobra que se está realizando. ABSTRACT The flight in route phase over areas of low traffic density is usually performed in high altitude airspace, in which the surveillance system is deficient or simply nonexistent. In this type of airspace, to guarantee the separation between aircrafts from the ground, adequate procedures are required to be used with the available systems, and this generally leads to the use of high separation minima. Also, in this type of airspace, it has been discussed by several organizations the possibility of delegating the responsibility of the aircraft separation to the aircraft itself, it carrying out the necessary functions to take on such responsibility without lowering the safety threshold. In order for the aircraft to take on the responsibility of the separation, it is necessary to provide the crew with new technical means and operational procedures, which will result in safe flight under those circumstances. The discussion of some of these systems and their validation from the point of view of acceptance by the crews is the objective of this achieved research work, the findings of which are presented here. The proposed system assists in the surveillance providing the autopilot with information to guarantee the self‐separation with the surrounding in flight traffic, avoiding and solving conflicts. The aircraft which detects the risk/conflict starts a negotiation with the intruder aircraft for finding a conflict resolution, then the pilot of the aircraft approves the solution maneuver and the aircraft broadcasts a message with the maneuver which will be executed. The autopilot maneuvers the aircraft to execute the solution, the evolution of which is shown in the proposed system display and the flight director.

Implementation of a module for risk of ozone impacts assessment to vegetation in the integrated assessment modelling system for the Iberian peninsula. Evaluation for wheat and holm oak

A module to estimate risks of ozone damage to vegetation has been implemented in the Integrated Assessment Modelling system for the Iberian Peninsula. It was applied to compute three different indexes for wheat and Holm oak; daylight AOT40 (cumulative ozone concentration over 40 ppb), cumulative ozone exposure index according to the Directive 2008/50/EC (AOT40-D) and PODY (Phytotoxic Ozone Dose over a given threshold of Y nmol m−2 s−1). The use of these indexes led to remarkable differences in spatial patterns of relative ozone risks on vegetation. Ozone critical levels were exceeded in most of the modelling domain and soil moisture content was found to have a significant impact on the results. According to the outputs of the model, daylight AOT40 constitutes a more conservative index than the AOT40-D. Additionally, flux-based estimations indicate high risk areas in Portugal for both wheat and Holm oak that are not identified by AOT-based methods.

Automatic detection of crop rows in maize fields with high weeds pressure

This paper proposes a new method, oriented to crop row detection in images from maize fields with high weed pressure. The vision system is designed to be installed onboard a mobile agricultural vehicle, i.e. submitted to gyros, vibrations and undesired movements. The images are captured under image perspective, being affected by the above undesired effects. The image processing consists of three main processes: image segmentation, double thresholding, based on the Otsu’s method, and crop row detection. Image segmentation is based on the application of a vegetation index, the double thresholding achieves the separation between weeds and crops and the crop row detection applies least squares linear regression for line adjustment. Crop and weed separation becomes effective and the crop row detection can be favorably compared against the classical approach based on the Hough transform. Both gain effectiveness and accuracy thanks to the double thresholding that makes the main finding of the paper.

Simulation, Design and Analysis of Air-Breathing Combined-Cycle Engines for High Speed Propulsion

Desde la aparición del turborreactor, el motor aeróbico con turbomaquinaria ha demostrado unas prestaciones excepcionales en los regímenes subsónico y supersónico bajo. No obstante, la operación a velocidades superiores requiere sistemas más complejos y pesados, lo cual ha imposibilitado la ejecución de estos conceptos. Los recientes avances tecnológicos, especialmente en materiales ligeros, han restablecido el interés por los motores de ciclo combinado. La simulación numérica de estos nuevos conceptos es esencial para estimar las prestaciones de la planta propulsiva, así como para abordar las dificultades de integración entre célula y motor durante las primeras etapas de diseño. Al mismo tiempo, la evaluación de estos extraordinarios motores requiere una metodología de análisis distinta. La tesis doctoral versa sobre el diseño y el análisis de los mencionados conceptos propulsivos mediante el modelado numérico y la simulación dinámica con herramientas de vanguardia. Las distintas arquitecturas presentadas por los ciclos combinados basados en sendos turborreactor y motor cohete, así como los diversos sistemas comprendidos en cada uno de ellos, hacen necesario establecer una referencia común para su evaluación. Es más, la tendencia actual hacia aeronaves "más eléctricas" requiere una nueva métrica para juzgar la aptitud de un proceso de generación de empuje en el que coexisten diversas formas de energía. A este respecto, la combinación del Primer y Segundo Principios define, en un marco de referencia absoluto, la calidad de la trasferencia de energía entre los diferentes sistemas. Esta idea, que se ha estado empleando desde hace mucho tiempo en el análisis de plantas de potencia terrestres, ha sido extendida para relacionar la misión de la aeronave con la ineficiencia de cada proceso involucrado en la generación de empuje. La metodología se ilustra mediante el estudio del motor de ciclo combinado variable de una aeronave para el crucero a Mach 5. El diseño de un acelerador de ciclo combinado basado en el turborreactor sirve para subrayar la importancia de la integración del motor y la célula. El diseño está limitado por la trayectoria ascensional y el espacio disponible en la aeronave de crucero supersónico. Posteriormente se calculan las prestaciones instaladas de la planta propulsiva en función de la velocidad y la altitud de vuelo y los parámetros de control del motor: relación de compresión, relación aire/combustible y área de garganta. ABSTRACT Since the advent of the turbojet, the air-breathing engine with rotating machinery has demonstrated exceptional performance in the subsonic and low supersonic regimes. However, the operation at higher speeds requires further system complexity and weight, which so far has impeded the realization of these concepts. Recent technology developments, especially in lightweight materials, have restored the interest towards combined-cycle engines. The numerical simulation of these new concepts is essential at the early design stages to compute a first estimate of the engine performance in addition to addressing airframe-engine integration issues. In parallel, a different analysis methodology is required to evaluate these unconventional engines. The doctoral thesis concerns the design and analysis of the aforementioned engine concepts by means of numerical modeling and dynamic simulation with state-of-the-art tools. A common reference is needed to evaluate the different architectures of the turbine and the rocket-based combined-cycle engines as well as the various systems within each one of them. Furthermore, the actual trend towards more electric aircraft necessitates a common metric to judge the suitability of a thrust generation process where different forms of energy coexist. In line with this, the combination of the First and the Second Laws yields the quality of the energy being transferred between the systems on an absolute reference frame. This idea, which has been since long applied to the analysis of on-ground power plants, was extended here to relate the aircraft mission with the inefficiency of every process related to the thrust generation. The methodology is illustrated with the study of a variable- combined-cycle engine for a Mach 5 cruise aircraft. The design of a turbine-based combined-cycle booster serves to highlight the importance of the engine-airframe integration. The design is constrained by the ascent trajectory and the allocated space in the supersonic cruise aircraft. The installed performance of the propulsive plant is then computed as a function of the flight speed and altitude and the engine control parameters: pressure ratio, air-to-fuel ratio and throat area.

Conductive-tether design for de-orbiting from given altitude and inclination

A bare tether with thin-tape cross section is both i) the most effective electrodinamic tether for given length and mass, and ii) capable of effective design for an arbitrary mission through its three disparate dimensions. It handily beats the fully insulated tether that exchanges current at both ends, a result resting in advantages of 2D current collection as against 3D collection; it has much greater perimeter than the round bare tether and much lower fatal debris-impact rate, leading to greatly faster de-orbiting and greatly higher probability of survival; and it only allows multi-line tethers reaching a few hundred lines to stand competitive. In selecting the disparate values of length L, width w, and thickness h for a de-orbit mission, performance involves three criteria: a) tether-tospacecraft mass ratio must be small; b) probability of survival against the debris environment must be high; and c) de-orbiting must be fast to reduce manoeuvres for avoiding catastrophic collisions with big active/passive satellites around. Beyond determining tether mass through the product Lwh, main dimension parameters affecting performance are L/h2li characterizing ohmic effects, and w determining electron collection. An algorithm for optimal selection of tape dimensions is elaborated.

Radar track segmentation with cubic splines for collision risk models in high density terminal areas

This paper presents a method to segment airplane radar tracks in high density terminal areas where the air traffic follows trajectories with several changes in heading, speed and altitude. The radar tracks are modelled with different types of segments, straight lines, cubic spline function and shape preserving cubic function. The longitudinal, lateral and vertical deviations are calculated for terminal manoeuvring area scenarios. The most promising model of the radar tracks resulted from a mixed interpolation using straight lines for linear segments and spline cubic functions for curved segments. A sensitivity analysis is used to optimise the size of the window for the segmentation process.

Deforestación y Pérdida de hábitat en Bosques de montaña en la Cuenca alta del Río Zamora (Loja, Ecuador)

Los bosques húmedos de montaña se encuentran reconocidos como uno de los ecosistemas más amenazados en el mundo, llegando inclusive a ser considerado como un “hotspot” por su alta diversidad y endemismo. La acelerada pérdida de cobertura vegetal de estos bosques ha ocasionado que, en la actualidad, se encuentren restringidos a una pequeña fracción de su área de distribución histórica. Pese a esto, los estudios realizados sobre cual es efecto de la deforestación, fragmentación, cambios de uso de suelo y su efecto en las comunidades de plantas presentes en este tipo de vegetación aún son muy escuetos, en comparación a los realizados con sus similares amazónicos. En este trabajo, el cual se encuentra dividido en seis capítulos, abordaremos los siguientes objetivos: a) Comprender cuál es la dinámica que han seguido los diferentes tipos de bosques montanos andinos de la cuenca del Rio Zamora, Sur de Ecuador durante entre 1976 y 2002. b) Proveer de evidencia de las tasas de deforestación y fragmentación de todos los tipos diferentes de bosques montanos andinos presentes en la cuenca del Rio Zamora, Sur de Ecuador entre 1976 y 2002. c) Determinar qué factores inducen a la fragmentación de bosques de montaña en la cuenca alta del río Zamora entre 1976 y 2002. d) Determinar cuáles son y cómo afectan los factores ambientales y socioeconómicos a la dinámica de la deforestación y regeneración (pérdida y recuperación del hábitat) sufrida por los bosques de montaña dentro de la zona de estudio y e) Determinar si la deforestación y fragmentación actúan sobre la diversidad y estructura de las comunidades de tres tipos de organismos (comunidades de árboles, comunidades de líquenes epífitos y comunidades de hepáticas epífitas). Este estudio se centró en el cuenca alta del río Zamora, localizada al sur de Ecuador entre las coordenadas 3º 00´ 53” a 4º 20´ 24.65” de latitud sur y 79º 49´58” a 78º 35´ 38” de longitud oeste, que cubre alrededor de 4300 km2 de territorio situado entre las capitales de las provincias de Loja y Zamora-Chinchipe. Con objeto de predecir la dinámica futura de la deforestación en la región de Loja y cómo se verán afectados los diferentes tipos de hábitat, así como para detectar los factores que más influyen en dicha dinámica, se han construido modelos basados en la historia de la deforestación derivados de fotografías aéreas e imágenes satelitales de tres fechas (1976, 1989 y 2002). La cuantificación de la deforestación se realizó mediante la tasa de interés compuesto y para la caracterización de la configuración espacial de los fragmentos de bosque nativo se calcularon índices de paisaje los cuales fueron calculados utilizando el programa Fragstats 3.3. Se ha clasificado el recubrimiento del terreno en forestal y no forestal y se ha modelado su evolución temporal con Modelos Lineales Generalizados Mixtos (GLMM), empleando como variables explicativas tanto variables ambientales espacialmente explícitas (altitud, orientación, pendiente, etc) como antrópicas (distancia a zonas urbanizadas, deforestadas, caminos, entre otras). Para medir el efecto de la deforestación sobre las comunidades modelo (de árboles, líquenes y hepáticas) se monitorearon 11 fragmentos de vegetación de distinto tamaño: dos fragmentos de más de cien hectáreas, tres fragmentos de entre diez y noventa ha y seis fragmentos de menos de diez hectáreas. En ellos se instalaron un total de 38 transectos y 113 cuadrantes de 20 x 20 m a distancias que se alejaban progresivamente del borde en 10, 40 y 80 m. Nuestros resultados muestran una tasa media anual de deforestación del 1,16% para todo el período de estudio, que el tipo de vegetación que más alta tasa de destrucción ha sufrido, es el páramo herbáceo, con un 2,45% anual. El análisis de los patrones de fragmentación determinó un aumento en 2002 de más del doble de fragmentos presentes en 1976, lo cual se repite en el análisis del índice de densidad promedio. El índice de proximidad media entre fragmentos muestra una reducción progresiva de la continuidad de las áreas forestadas. Si bien las formas de los fragmentos se han mantenido bastante similares a lo largo del período de estudio, la conectividad entre estos ha disminuido en un 84%. Por otro lado, de nuestros análisis se desprende que las zonas con mayor probabilidad de deforestarse son aquellas que están cercanas a zonas previamente deforestadas; la cercanía a las vías también influye significativamente en la deforestación, causando un efecto directo en la composición y estructura de las comunidades estudiadas, que en el caso de los árboles viene mediado por el tamaño del fragmento y en el caso del componente epífito (hepáticas y líquenes), viene mediado tanto por el tamaño del fragmento como por la distancia al borde del mismo. Se concluye la posibilidad de que, de mantenerse esta tendencia, este tipo de bosques desaparecerá en corto tiempo y los servicios ecosistémicos que prestan, se verán seriamente comprometidos. ABSTRACT Mountain rainforests are recognized as one of the most threatened ecosystems in the world, and have even come to be considered as a “hotspot” due to their high degree of diversity and endemism. The accelerated loss of plant cover of these forests has caused them to be restricted today to a small fraction of their area of historic distribution. In spite of this, studies done on the effect of deforestation, fragmentation, changes in soil use and their effect on the plant communities present in this type of vegetation are very brief compared to those done on their analogues in the Amazon region. In this study, which is divided into six chapters, we will address the following objectives: a) To understand what the dynamic followed by the different types of Andean mountain forests in the Zamora River watershed of southern Ecuador has been between 1976 and 2002. b) To provide evidence of the rates of deforestation and fragmentation of all the different types of Andean mountain forests existing in the upper watershed of the Zamora River between 1976 and 2002. c) To determine the factors that induces fragmentation of all different types of Andean mountain forests existing in the upper watershed of the Zamora River between 1976 and 2002. d) To determine what the environmental and anthropogenic factors are driving the dynamic of deforestation and regeneration (loss and recuperation of the habitat) suffered by the mountain forests in the area of the study and e) To determine if the deforestation and fragmentation act upon the diversity and structure of three model communities: trees, epiphytic lichens and epiphytic liverworts. This study is centered on the upper Zamora River watershed, located in southern Ecuador between 3º 00´ 53” and 4º 20´ 24.65 south latitude and 79º 49´ 58” to 78º 35´ 38” west longitude, and covers around 4,300 km2 of territory located between Loja and Zamora-Chinchipe provinces. For the purpose of predicting the future dynamic of deforestation in the Loja region and how different types of habitats will be affected, as well as detecting the environmental and socioeconomic factors that influence landscape dynamics, models were constructed based on deforestation history, derived from aerial photographs and satellite images for three dates (1976, 1989 and 2002). Quantifying the deforestation was done using the compound interest rate; to characterize the spatial configuration of fragments of native forest, landscape indices were calculated with Fragstats 3.3 program. Land cover was classified as forested and not forested and its evolution over time was modeled with Generalized Linear Mixed Models (GLMM), using spatially explicit environmental variables (altitude, orientation, slope, etc.) as well as anthropic variables (distance to urbanized, deforested areas and roads, among others) as explanatory variables. To measure the effects of fragmentation on three types of model communities (forest trees and epiphytic lichen and liverworts), 11 vegetation fragments of different sizes were monitored: two fragments of more than one hundred hectares, three fragments of between ten and ninety ha and six fragments of fewer than ten hectares . In these fragments, a total of 38 transects and 113 20 x 20 m quadrats were installed at distances that progressively moved away from the edge of the fragment by 10, 40 and 80 m. Our results show an average annual rate of deforestation of 1.16% for the entire period of the study, and that the type of vegetation that suffered the highest rate of destruction was grassy paramo, with an annual rate of 2.45%. The analysis of fragmentation patterns determined the number of fragments in 2002 more than doubled the number of fragments present in 1976, and the same occurred for the average density index. The variation of the average proximity index among fragments showed a progressive reduction of the continuity of forested areas. Although fragment shapes have remained quite similar over the period of the study, connectivity among them has diminished by 84%. On the other hand, it emerged from our analysis that the areas of greatest probability of deforestation were those that are close to previously deforested areas; proximity to roads also significantly favored the deforestation causing a direct effect on the composition of our model communities, that in the case of forest trees is determined by the size of the fragment, and in the case of the epiphyte communities (liverworts and lichens), is determined, by the size of the fragment as well as the distance to edge. A subject under discussion is the possibility that if this tendency continues, this type of forest will disappear in a short time, and the ecological services it provides, will be seriously endangered.