15 resultados para grapevine rugose wood
em Universidad Politécnica de Madrid
Resumo:
The aim of this research was to implement a methodology through the generation of a supervised classifier based on the Mahalanobis distance to characterize the grapevine canopy and assess leaf area and yield using RGB images. The method automatically processes sets of images, and calculates the areas (number of pixels) corresponding to seven different classes (Grapes, Wood, Background, and four classes of Leaf, of increasing leaf age). Each one is initialized by the user, who selects a set of representative pixels for every class in order to induce the clustering around them. The proposed methodology was evaluated with 70 grapevine (V. vinifera L. cv. Tempranillo) images, acquired in a commercial vineyard located in La Rioja (Spain), after several defoliation and de-fruiting events on 10 vines, with a conventional RGB camera and no artificial illumination. The segmentation results showed a performance of 92% for leaves and 98% for clusters, and allowed to assess the grapevine’s leaf area and yield with R2 values of 0.81 (p < 0.001) and 0.73 (p = 0.002), respectively. This methodology, which operates with a simple image acquisition setup and guarantees the right number and kind of pixel classes, has shown to be suitable and robust enough to provide valuable information for vineyard management.
Resumo:
Los paneles sándwich de madera son un producto de creciente aplicación en la edificación de nuestro país. Este ascendente uso del material debe estar acompañado de las garantías necesarias avaladas por un estudio previo de sus prestaciones. Como es preceptivo y entre otros, se evalúa su durabilidad frente a las condiciones climatológicas, clave en los productos derivados de la madera, acorde a la normativa actual definida con tal fin, la Guía ETAG 016. Sin embargo, debido a la clase de uso del material, se ha detectado que dicha normativa tal y como está concebida no es capaz de valorar su envejecimiento adecuadamente. En este trabajo se proponen ensayos alternativos al establecido tras exhaustivos aná- lisis que recrean las condiciones reales de uso y más acordes a los productos de madera. Se concluye que la incorporación de una lámina impermeable, pero permeable al vapor de agua hacia el exterior, como las utilizadas en el montaje, aportan el mejor procedimiento de ensayo. Composite lightweight wood panels are being increasingly used in construction in Spain. Their growing use should be accompanied by necessary guarantees based on studies of their properties. As it is prescriptive and in addition to others tests, in the present work is examinated the durability of these panels when exposed to the climatic conditions, a characteristic of great importance for wood products, according to Guide ETAG 016, the current standard defining the ageing tests to be used. However, due to the use class of this material, there are indications that the testing outlined in this Guide is inappropriate for assessing the ageing of wood-based sandwich panels. Alternative tests are here proposed that recreate rather better the real conditions under which these products are used. Covering the samples in a waterproof sheeting permeable to the outward movement of water vapour, which is in fact used in the installation, provided the best procedure for testing these panels.
Resumo:
Fort the last decades Spanish vineyard has experience a deep transformation by allowing irrigation, changing the traditional bush into a possible full mechanized VSP and cultivar changing map was also took into account. Tempranillo has led the change to replace the white grapevines, such as in La Mancha; however results in these warm areas were not as expect. Under this conditions, low yield, low acidity and uncouple sacharimetric and phenol maturity usually is obtained. Within this frame an experimental trial was set up with the goal to know other cultivars that could better perform than Tempranillo in warm areas in a sustainable viticulture.
Resumo:
This study uses PCR-derived marker systems to investigate the extent and distribution of genetic variability of 53 Garnacha accessions coming from Italy, France and Spain. The samples studied include 28 Italian accessions (named Tocai rosso in Vicenza area; Alicante in Sicily and Elba island; Gamay perugino in Perugia province; Cannonau in Sardinia), 19 Spanish accessions of different types (named Garnacha tinta, Garnacha blanca, Garnacha peluda, Garnacha roja, Garnacha erguida, Garnacha roya) and 6 French accessions (named Grenache and Grenache noir). In order to verify the varietal identity of the samples, analyses based on 14 simple sequence repeat (SSR) loci were performed. The presence of an additional allele at ISV3 locus (151 bp) was found in four Tocai rosso accessions and in a Sardinian Cannonau clone, that are, incidentally, chimeras. In addition to microsatellite analysis, intravarietal variability study was performed using AFLP, SAMPL and M-AFLP molecular markers. AFLPs could discriminate among several Garnacha samples; SAMPLs allowed distinguishing few genotypes on the basis of their geographic origin, whereas M-AFLPs revealed plant-specific markers, differentiating all accessions. Italian samples showed the greatest variability among themselves, especially on the basis of their different provenance, while Spanish samples were the most similar, in spite of their morphological diversity.
Resumo:
Palatal clicks are most interesting for human echolocation. Moreover, these sounds are suitable for other acoustic applications due to their regular mathematical properties and reproducibility. Simple and nondestructive techniques, bioinspired by synthetized pulses whose form reproduces the best features of palatal clicks, can be developed. The use of synthetic palatal pulses also allows detailed studies of the real possibilities of acoustic human echolocation without the problems associated with subjective individual differences. These techniques are being applied to the study of wood. As an example, a comparison of the performance of both natural and synthetic human echolocation to identify three different species of wood is presented. The results show that human echolocation has a vast potential.
Resumo:
The evapotranspiration (ET c) of a table grape vineyard (Vitis vinifera, cv. Red Globe) trained to a gable trellis under netting and black plastic mulching was determined under semiarid conditions in the central Ebro River Valley during 2007 and 2008. The netting was made of high-density polyethylene (pores of 12 mm2) and was placed just above the ground canopy about 2.2 m above soil surface. Black plastic mulching was used to minimize soil evaporation. The surface renewal method was used to obtain values of sensible heat flux (H) from high-frequency temperature readings. Later, latent heat flux (LE) values were obtained by solving the energy balance equation. For the May–October period, seasonal ET c was about 843 mm in 2007 and 787 mm in 2008. The experimental weekly crop coefficients (K cexp) fluctuated between 0.64 and 1.2. These values represent crop coefficients adjusted to take into account the reduction in ET c caused by the netting and the black plastic mulching. Average K cexp values during mid- and end-season stages were 0.79 and 0.98, respectively. End-season K cexp was higher due to combination of factors related to the precipitation and low ET o conditions that are typical in this region during fall. Estimated crop coefficients using the Allen et al. (1998) approach adjusting for the effects of the netting and black plastic mulching (K cFAO) showed a good agreement with the experimental K cexp values.
Resumo:
Grapevine germplasm, including 38 of the main Portuguese cultivars and three foreign cultivars, Pinot Noir, Pinot Blanc and Chasselas, used as a reference, and 37 true-to-type clones from the Alvarinho, Arinto, Loureiro, Moscatel Galego Branco, Trajadura and Vinhão cultivars were studied using AFLP and three retrotransposon-based molecular techniques, IRAP, REMAP and SSAP. To study the retrotransposon-based polymorphisms, 18 primers based on the LTR sequences of Tvv1, Gret1 and Vine-1 were used. In the analysis of 41 cultivars, 517 IRAP, REMAP, AFLP and SSAP fragments were obtained, 83% of which were polymorphic. For IRAP, only the Tvv1Fa primer amplified DNA fragments. In the REMAP analysis, the Tvv1Fa-Ms14 primer combination only produced polymorphic bands, and the Vine-1 primers produced mainly ISSR fragments. The highest number of polymorphic fragments was found for AFLP. Both AFLP and SSAP showed a greater capacity for identifying clones, resulting in 15 and 9 clones identified, respectively. Together, all of the techniques allowed for the identification of 54% of the studied clones, which is an important step in solving one of the challenges that viticulture currently faces.
Resumo:
The general objective of this work is to analyze the regulatory processes underlying flowering transition and inflorescence and flower development in grapevine. Most of these crucial developmental events take place within buds growing during two seasons in two consecutive years. During the first season, the shoot apical meristem within the bud differentiates all the basic elements of the shoot including flowering transition in lateral primordia and development of inflorescence primordia. These events practically end with bud dormancy. The second season, buds resume shoot growth associated to flower formation and development. In grapevine, the lateral meristems can give rise either to tendril or inflorescence primordia that are homologous organs. With this purpose, we performed global transcriptome analyses along the bud annual cycle and during inflorescence and tendril development. In addition, we approach the genomic analysis of the MIKC type MADS-box gene family in grapevine to identify all its members and assign them putative biological functions. Regarding buds developmental cycle, the results indicate that the main factors explaining the global gene expression differences were the processes of bud dormancy and active growth as well as stress responses. Non dormant buds exhibited up-regulation in functional categories typical of actively proliferating and growing cells (photosynthesis, cell cycle regulation, chromatin assembly) whereas in dormant ones the main functional categories up-regulated were associated to stress response pathways together with transcripts related to starch catabolism. Major transcriptional changes during the dormancy period were associated to the para/endodormancy, endo/ecodormancy and ecodormancy/bud break transitions. Global transcriptional analyses along tendril and inflorescence development suggested that these two homologous organs share a common transcriptional program related to cell proliferation functions. Both structures showed a progressive decrease in the expression of categories such as cell-cycle, auxin metabolism/signaling, DNA metabolism, chromatin assembly and a cluster of five transcripts belonging to the GROWTH-REGULATING FACTOR (GRF) transcription factor family, that are known to control cell proliferation in other species and determine the size of lateral organs. However, they also showed organ specific transcriptional programs that can be related to their differential organ structure and function. Tendrils showed higher transcription of genes related to photosynthesis, hormone signaling and secondary metabolism than inflorescences, while inflorescences have higher transcriptional activity for genes encoding transcription factors (especially those belonging to the MADS-box gene family). Further analysis along inflorescence development evidenced the relevance of additional functions likely related to processes of flower development such as fatty acid and lipid metabolism, jasmonate signaling and oxylipin biosynthesis. The transcriptional analyses performed highlighted the relevance of several groups of transcriptional regulators in the developmental processes studied. The expression profiles along bud development revealed significant differences for some MADS-box subfamilies in relation to other plant species, like the members of the FLC and SVP subfamilies suggesting new roles for these groups in grapevine. In this way, it was found that VvFLC2 and VvAGL15.1 could participate, together with some members of the SPL-L family, in dormancy regulation, as was shown for some of them in other woody plants. Similarly, the expression patterns of the VvFLC1, VvFUL, VvSOC1.1 (together with VvFT, VvMFT1 and VFL) genes could indicate that they play a role in flowering transition in grapevine, in parallel to their roles in other plant systems. The expression levels of VFL, the grapevine LEAFY homolog, could be crucial to specify the development of inflorescence and flower meristems instead of tendril meristems. MADS-box genes VvAP3.1 and 2, VvPI, VvAG1 and 3, VvSEP1-4, as well as VvBS1 and 2 are likely associated with the events of flower meristems and flower organs differentiation, while VvAP1 and VvFUL-L (together with VvSOC1.1, VvAGL6.2) could be involved on tendril development given their expression patterns. In addition, the biological function ofVvAP1 and VvTFL1A was analyzed using a gene silencing approach in transgenic grapevine plants. Our preliminary results suggested a possible role for both genes in the initiation and differentiation of tendrils. Finally, the genomic analysis of the MADS-box gene family in grapevine revealed differential features regarding number and expression pattern of genes putatively involved in the flowering transition process as compared to those involved in the specification of flower and fruit organ identity. Altogether, the results obtained allow identifying putative candidate genes and pathways regulating grapevine reproductive developmental processes paving the way to future experiments demonstrating specific gene biological functions. RESUMEN El objetivo general de este trabajo es analizar los procesos regulatorios subyacentes a la inducción floral así como al desarrollo de la inflorescencia y la flor en la vid. La mayor parte de estos eventos cruciales tienen lugar en las yemas a lo largo de dos estaciones de crecimiento consecutivas. Durante la primera estación, el meristemo apical contenido en la yema diferencia los elementos básicos del pámpano, lo cual incluye la inducción de la floración en los meristemos laterales y el subsiguiente desarrollo de primordios de inflorescencia. Estos procesos prácticamente cesan con la entrada en dormición de la yema. En la segunda estación, se reanuda el crecimiento del pámpano acompañado por la formación y desarrollo de las flores. En la vid, los meristemos laterales pueden dar lugar a primordios de inflorescencia o de zarcillo que son considerados órganos homólogos. Con este objetivo llevamos a cabo un estudio a nivel del transcriptoma de la yema a lo largo de su ciclo anual, así como a lo largo del desarrollo de la inflorescencia y del zarcillo. Además realizamos un análisis genómico de la familia MADS de factores transcripcionales (concretamente aquellos del tipo MIKC) para identificar todos sus miembros y tratar de asignarles posibles funciones biológicas. En cuanto al ciclo de desarrollo de la yema, los resultados indican que los principales factores que explican las diferencias globales en la expresión génica fueron los procesos de dormición de la yema y el crecimiento activo junto con las respuestas a diversos tipos de estrés. Las yemas no durmientes mostraron un incremento en la expresión de genes contenidos en categorías funcionales típicas de células en proliferación y crecimiento activo (como fotosíntesis, regulación del ciclo celular, ensamblaje de cromatina), mientras que en las yemas durmientes, las principales categorías funcionales activadas estaban asociadas a respuestas a estrés, así como con el catabolismo de almidón. Los mayores cambios observados a nivel de transcriptoma en la yema coincidieron con las transiciones de para/endodormición, endo/ecodormición y ecodormición/brotación. Los análisis transcripcionales globales a lo largo del desarrollo del zarcillo y de la inflorescencia sugirieron que estos dos órganos homólogos comparten un programa transcripcional común, relacionado con funciones de proliferación celular. Ambas estructuras mostraron un descenso progresivo en la expresión de genes pertenecientes a categorías funcionales como regulación del ciclo celular, metabolismo/señalización por auxinas, metabolismo de ADN, ensamblaje de cromatina y un grupo de cinco tránscritos pertenecientes a la familia de factores transcripcionales GROWTH-REGULATING FACTOR (GRF), que han sido asociados con el control de la proliferación celular y en determinar el tamaño de los órganos laterales en otras especies. Sin embargo, también pusieron de manifiesto programas transcripcionales que podrían estar relacionados con la diferente estructura y función de dichos órganos. Los zarcillos mostraron mayor actividad transcripcional de genes relacionados con fotosíntesis, señalización hormonal y metabolismo secundario que las inflorescencias, mientras que éstas presentaron mayor actividad transcripcional de genes codificantes de factores de transcripción (especialmente los pertenecientes a la familia MADS-box). Análisis adicionales a lo largo del desarrollo de la inflorescencia evidenciaron la relevancia de otras funciones posiblemente relacionadas con el desarrollo floral, como el metabolismo de lípidos y ácidos grasos, la señalización mediada por jasmonato y la biosíntesis de oxilipinas. Los análisis transcripcionales llevados a cabo pusieron de manifiesto la relevancia de varios grupos de factores transcripcionales en los procesos estudiados. Los perfiles de expresión estudiados a lo largo del desarrollo de la yema mostraron diferencias significativas en algunas de las subfamilias de genes MADS con respecto a otras especies vegetales, como las observadas en los miembros de las subfamilias FLC y SVP, lo cual sugiere que podrían desempeñar nuevas funciones en la vid. En este sentido, se encontró que los genes VvFLC2 y VvAGL15.1 podrían participar, junto con algunos miembros de la familia SPL-L, en la regulación de la dormición. De un modo similar, los patrones de expresión de los genes VvFLC1, VvFUL, VvSOC1.1 (junto con VvFT, VvMFT1 y VFL) podría indicar que desempeñan un papel en la regulación de la inducción de la floración en la vid, como se ha observado en otros sistemas vegetales. Los niveles de expresión de VFL, el homólogo en vid del gen LEAFY de A. thaliana podrían ser cruciales para la especificación del desarrollo de meristemos de inflorescencia y flor en lugar de meristemos de zarcillo. Los genes VvAP3.1 y 2, VvPI, VvAG1 y 3, VvSEP1-4, así como VvBS1 y 2 parecen estar asociados con los eventos de diferenciación de meristemos y órganos florales, mientras que VvAP1 y VvFUL-L (junto con VvSOC1.1 y VvAGL6.2) podrían estar implicados en el desarrollo del zarcillo dados sus patrones de expresión. Adicionalmente, se analizó la función biológica de los genes VvAP1 y VvTFL1A por medio de una estrategia de silenciamiento génico. Los datos preliminares sugieren un posible papel para ambos genes en la iniciación y diferenciación de los zarcillos. Finalmente, el análisis genómico de la familia MADS en vid evidenció diferencias con respecto a otras especies vegetales en cuanto a número de miembros y patrón de expresión en genes supuestamente implicados en la inducción de la floración, en comparación con aquellos relacionados con la especificación de identidad de órganos florales y desarrollo del fruto. En conjunto, los resultados obtenidos han permitido identificar posibles rutas y genes candidatos a participar en la regulación de los procesos de desarrollo reproductivo de la vid, sentando las bases de futuros experimentos encaminados a conocer la funciones biológicas de genes específicos.
Resumo:
Información paleoecológica relativa a la distribución de táxones arbóreos durante el holoceno, basado en restos fósiles leñosos.
Resumo:
Background Obeche wood dust is a known cause of occupational asthma where an IgE-mediated mechanism has been demonstrated. Objective To characterize the allergenic profile of obeche wood dust and evaluate the reactivity of the proteins by in vitro, ex vivo and in vivo assays in carpenters with confirmed rhinitis and/or asthma Materials and methods An in-house obeche extract was obtained, and two IgE binding bands were purified (24 and 12 kDa) and sequenced by N-terminal identity. Specific IgE and IgG, basophil activation tests and skin prick tests (SPTs) were performed with whole extract and purified proteins. CCD binding was analyzed by ELISA inhibition studies. Results Sixty-two subjects participated: 12 with confirmed occupational asthma/rhinitis (ORA+), 40 asymptomatic exposed (ORA−), and 10 controls. Of the confirmed subjects, 83% had a positive SPT to obeche. There was a 100% recognition by ELISA in symptomatic subjects vs. 30% and 10% in asymptomatic exposed subjects and controls respectively (p<0.05). Two new proteins were purified, a 24 kDa protein identified as a putative thaumatin-like protein and a 12 kDa gamma-expansin. Both showed allergenic activity in vitro, with the putative thaumatin being the most active, with 92% recognition by ELISA and 100% by basophil activation test in ORA+ subjects. Cross-reactivity due to CCD was ruled out in 82% of cases. Conclusions Two proteins of obeche wood were identified and were recognized by a high percentage of symptomatic subjects and by a small proportion of asymptomatic exposed subjects. Further studies are required to evaluate cross reactivity with other plant allergens.
Resumo:
Se analiza la influencia de las principales actuaciones selvicolas en la calidad de la madera. Turno, Espaciamiento, Poda, Abonado, Riego y Tratamiento contra plagas.
Resumo:
Los Clics palatales son sonidos interesantes para la ecolocalización humana pero tambien pueden utilizarse para determinar propiedades de la madera como para poder identificar tres especies diferentes de madera. Los resultados muestran que la ecolocalización humana tiene un enorme potencial.
Resumo:
El objetivo del estudio es determinar el efecto de tratamiento de la madera de Pinus sylvestris con sustancias protectoras en las propiedades mecánicas. Para ello se utilizan 40 muestras de madera libre de defectos de Pinus sylvestris L. tratándose con protectores orgánicos (Vacsol Azure WR 2601) 50 con protectores hidrosolubles (Tanalith E 3492) y 40 muestras de control sin tratamiento. Se evaluó la resistencia mecánica a la flexión estática, módulo de elasticidad y la fuerza de compresión paralela a la fibra fueron comparados con madera no tratada. El análisis de regresión entre la penetración y la fuerza de compresión paralela se realizó con las muestras tratadas con conservante a base de agua. Resultados principales: Los resultados indican que la madera tratada (con cualquiera de los productos) presenta un aumento estadísticamente significativo de la resistencia mecánica en todas las tres características mecánicas. Los resultados obtenidos difieren de estudios anteriores llevada a cabo por otros autores. No hubo correlación entre la resistencia a la compresión en paralelo y el grado de impregnación de la madera con base de agua de cobre azoles. La explicación más probable para estos resultados se refiere a cambios en la presión durante el tratamiento. El uso de muestras de control no tratadas en lugar de las muestras tratadas sólo con agua es más probable para producir resultados significativos en los estudios de resistencia mecánica . La investigación pone de relieve que la madera tratada presenta un aumento estadísticamente significativo en el Modulo de Elasticidad, módulo de rotura a la flexión estática y resistencia a la compresión paralela. No hubo correlación entre la resistencia a la compresión en paralelo y el grado de impregnación con conservante hidrosoluble.
Resumo:
This study analyses the variation of main physical-mechanical properties of wood along the longitudinal and radial directions of the tree for Abies alba Mill. growing in the Spanish Pyrenees. Small clear specimens were used to study the properties of volumetric shrinkage (VS), density (?), hardness (H), bending strength (MOR), modulus of elasticity (MOE), maximum compressive strength parallel to the grain (MCS) and impact strength (K). Several models of properties variation in the longitudinal and radial directions were analyzed. Main trends of variation of properties throughout the tree stem were identified although none of them could be fitted to predictive statistical models. Along the longitudinal direction, the properties studied followed a downward trend from the base to the crown, which was not significant in all cases, indicating that no differences in quality existed. Throughout the radial direction the trend is upward for the first 40-50 growth rings, after which it slopes downwards, more gently at first until rings 70-75 and then more steeply. This behaviour is related to variation in wood structure from the pith to the bark, depending on whether the wood is juvenile, sapwood or heartwood, and to wood maturity and microfibril angle. Authors encourage carrying further studies on other populations of A. alba in the Spanish Pyrenees to check if the trends found in this study apply to other provenances.
Resumo:
Nondestructive techniques are widely used to assess existing timber structures. The models proposed for these methods are usually performed in the laboratory using small clear wood specimens. But in real situations many anomalies, defects and biological damage are found in wood. In these cases the existing models only indicate that the values are outside normality without providing any other information. To solve this problem, a study of non-destructive probing methods for wood was performed, testing the behaviour of four different techniques (penetration resistance, pullout resistance, drill resistance and chip drill extraction) on wood samples with different biological damage, simulating an in-situ test. The wood samples were obtained from existing Spanish timber structures with biotic damage caused by borer insects, termites, brown rot and white rot. The study concludes that all of the methods offer more or less detailed information about the degree of deterioration of wood, but that the first two methods (penetration and pullout resistance) cannot distinguish between pathologies. On the other hand, drill resistance and chip drill extraction make it possible to differentiate pathologies and even to identify species or damage location. Finally, the techniques used were compared to characterize their advantages and disadvantages.