Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

Exploring users inter-temporal preferences for measuring transport social equity effects

There exist different ways for defining a welfare function. Traditionally, welfare economic theory foundation is based on the Net Present Value (NPV) calculation where the time dependent preferences of considered agents are taken into account. However, the time preferences, remains a controversial subject. Currently, the traditional approach employs a unique discount rate for various agents. Nevertheless, this way of discounting appears inconsistent with sustainable development. New research work suggests that the discount rate may not be a homogeneous value. The discount rates may change following the individual’s preferences. A significant body of evidence suggests that people do not behave following a constant discount rate. In fact, UK Government has quickly recognized the power of the arguments for time-varying rates, as it has done in its official guidance to Ministries on the appraisal of investments and policies. Other authors deal with not just time preference but with uncertainty about future income (precautionary saving). In a situation in which economic growth rates are similar across time periods, the rationale for declining social optimal discount rates is driven by the preferences of the individuals in the economy, rather than expectations of growth. However, these approaches have been mainly focused on long-term policies where intergenerational risks may appear. The traditional cost-benefit analysis (CBA) uses a unique discount rate derived from market interest rates or investment rates of return for discounting the costs and benefits of all social agents included in the CBA. However, recent literature showed that a more adequate measure of social benefit is possible by using different discount rates including inter-temporal preferences rate of users, private investment discount rate and intertemporal preferences rate of government. Actually, the costs of opportunity may differ amongst individuals, firms, governments, or society in general, as do the returns on savings. In general, the firms or operators require an investment rate linked to the current return on savings, while the discount rate of consumers-users depends on their time preferences with respect of the current and the future consumption, as well as society can take into account the intergenerational well-being, adopting a lower discount rate for today’s generation. Time discount rate of social actors (users, operators, government and society) places a lower value in a future gain, but the uncertainty about future income strongly determines the individual preferences. These time and uncertainty depends on preferences and should be integrated into a transport policy formulation that may have significant social impacts. The discount rate of a user cannot be the same than the operator’s discount rate. The preferences of both are different. In addition, another school of thought suggests that people, such as a social group, may have different attitudes towards future costs and benefits. Particularly, the users have different discount rates related to their income. Some research work tried to modify user discount rates using a compensating weight which represents the inverse of household income level. The inter-temporal preferences are a proxy of the willingness to pay during the time. Its consideration is important in order to make acceptable or not a policy or investment

Electric current of an electrified jet issuing from a long metallic tube.

This paper presents an analysis of the transport of electric current in a jet of an electrically conducting liquid discharging from a metallic tube into a gas or a vacuum, and subject to an electric field due to a high voltage applied between the tube and a far electrode. The flow, the surface charge and the electric field are computed in the current transfer region of the jet, where conduction current in the liquid becomes surface current due to the convection of electric charge accumulated at its surface. The electric current computed as a function of the flow rate of the liquid injected through the tube increases first as the square root of this flow rate, levels to a nearly constant value when the flow rate is increased and finally sets to a linear increase when the flow rate is further increased. The current increases linearly with the applied voltage at small and moderate values of this variable, and faster than linearly at high voltages. The characteristic length and structure of the current transfer region are determined. Order-of-magnitude estimates for jets which are only weakly stretched by the electric stresses are worked out that qualitatively account for some of the numerical results.

¿Impact from road transport of radioactive wastes in Spain?

Transports of radioactive wastes in Spain are becoming issues of renewed interest, due to the increased mobility of these materials which can be expected after the building and operation of the planned central repository for this country in a near future. Such types of residues will be mainly of the medium and high activity classes and have raised concerns on the safety of the operations, the radiological protection of the individuals, the compliance with the legal regulations and their environmental consequences of all kind. In this study, relevant information for the assessment of radiological risk of road transport were taken into account, as the sources and destination of the radioactive transports, the amount of traveling to be done, the preferred routes and populations affected, the characterization of the residues and containers, their corresponding testing, etc. These data were supplied by different organizations fully related with these activities, like the nuclear power stations, the companies in charge of radioactive transports, the enterprises for inspection and control of the activities, etc., as well as the government institutions which are responsible for the selection and location of the storage facility and other decisions on the nuclear policies of the country. Thus, we have developed a program for computing the data in such a form that by entering the radiation levels at one meter of the transport loads and by choosing a particular displacement, the computer application is capable to calculate the corresponding radiological effects, like the global estimated impact, its relevance to the population in general or on those people living and driving near the main road routes, the doses received by the most exposed individuals (e.g. the workers for loading or driving the vehicle), or the probability of detrimental on the human health. The results of this work could be of help for a better understanding and management of these activities and their related impacts; at the same time that the generated reports of the computer application are considered of particular interest as innovative and complementary information to the current legal documentation, which is basically required for transporting radioactive wastes in the country, according with the international safety rules (like IAEA and ADR).Though main studies are still in progress, as the definite location for the Spanish storage facility has not been decided yet, preliminary results with the existing transports of residues of medium activity indicate that the radiological impact is very low in conventional operations. Nevertheless, the management of these transports is complex and laborious, making it convenient to progress further in the analysis and quantification of this kind of events, which constitutes one of the main objectives of the present study for the radioactive road mobility in Spain.

Simulation model for the study of overhead rail current collector systems dynamics, focused on the design of a new conductor rail

Overhead rigid conductor arrangements for current collection for railway traction have some advantages compared to other, more conventional, energy supply systems. They are simple, robust and easily maintained, not to mention their flexibility as to the required height for installation, which makes them particularly suitable for use in subway infrastructures. Nevertheless, due to the increasing speeds of new vehicles running on modern subway lines, a more efficient design is required for this kind of system. In this paper, the authors present a dynamic analysis of overhead conductor rail systems focused on the design of a new conductor profile with a dynamic behaviour superior to that of the system currently in use. This means that either an increase in running speed can be attained, which at present does not exceed 110 km/h, or an increase in the distance between the rigid catenary supports with the ensuing saving in installation costs. This study has been carried out using simulation techniques. The ANSYS programme has been used for the finite element modelling and the SIMPACK programme for the elastic multibody systems analysis.

Solución para la delegación de identidad en Sistemas de Gestión de Identidad paneuropeos basada en infraestructuras de certificación y lenguajes formales de asertos de seguridad

La estrategia i2010 de la UE tiene como objetivo garantizar el liderazgo europeo en materia de TIC y poner los beneficios de la Sociedad de la Información al servicio de la economía, la sociedad y la calidad de vida personal, teniendo presente que los éxitos de Europa hasta la fecha se han basado en favorecer la competencia leal en los mercados de las telecomunicaciones y crear un mercado sin fronteras para contenidos y medios de comunicación digitales. En esta línea, la Comisión Europea ha establecido que los distintos estados miembros deben contribuir activamente al desarrollo y uso seguro de los servicios telemáticos entre sus ciudadanos. Más concretamente, atribuye a las Administraciones Públicas, tanto a nivel nacional, regional como local, un papel dinamizador de la Sociedad de la Información que les obliga a ofrecer paulatinamente todos los actos administrativos a los ciudadanos a través de Internet. Como primer paso para el uso seguro de los servicios telemáticos que ofrecen las instituciones públicas se hace preciso dotar a los ciudadanos de una identidad digital que les permita identificarse ante un Proveedor de Servicio o ante otros ciudadanos de manera inequívoca. Por esta razón, la mayoría de países europeos – y otros en el resto del mundo – están promoviendo, sistemas fiables de gestión de identidad electrónica (eIDM), de tal manera que los ciudadanos, las empresas y departamentos gubernamentales (incluso en Estados miembros diferentes) pueden identificar y certificar sus operaciones con precisión, rapidez y sencillez. Sin embargo, la gestión de esta identidad por las Administraciones Públicas supone un importante desafío, acentuado cuando se hace necesaria la interoperabilidad entre Administraciones de diferentes países, puesto que personas y entidades tienen credenciales de identificación diferentes en función de su propio marco jurídico nacional. Consciente del problema, en la Unión Europea se han puesto en marcha una serie de proyectos con el objetivo de conseguir la interoperabilidad de los eIDMs entre las instituciones públicas de diferentes Estados miembros. A pesar de ello, las soluciones adoptadas hasta la fecha son insuficientes porque no prevén todos los posibles casos de interacción del usuario con las instituciones. En concreto, no tienen en cuenta un aspecto muy importante que se ofrece en los distintos sistemas jurídicos nacionales, a saber, la delegación de la identidad, mediante la cual un ciudadano puede autorizar a otro para que actúe en su nombre para acceder a determinados servicios prestados por las instituciones públicas. En esta tesis se realizan un conjunto de aportaciones que dan solución a distintos aspectos de los problemas planteados y que, de forma conjunta, permiten la interoperabilidad y la delegación de identidad en determinados Sistemas de Gestión de Identidad aplicados al entorno de las Administraciones Públicas. En el caso de la delegación, se ha definido un sistema de delegación dinámica de identidad entre dos entidades genéricas que permite solucionar el problema del acceso delegado a los servicios telemáticos ofrecidos por las Administraciones Públicas. La solución propuesta se basa en la generación de un token de delegación, constituido a partir de un Certificado Proxy, que permite a la entidad que delega establecer la delegación de identidad en otra entidad en base a un subconjunto de sus atributos como delegador, estableciendo además, en el propio token de delegación, restricciones en el conjunto de servicios accesibles a la entidad delegada y el tiempo de validez de la delegación. Adicionalmente, se presentan los mecanismos necesarios tanto para poder revocar un token de delegación como para comprobar sin un token de delegación ha sido o no revocado. Para ello se propone una solución para la identificación unívoca de tokens de delegación y la creación de una nueva entidad denominada Autoridad de Revocación de Tokens de Delegación. Entre las características del sistema de delegación propuesto destaca el que es lo suficientemente seguro como para ser utilizado en el entorno de la Administración Pública, que no requiere el uso de mecanismos off‐line para la generación de la delegación y que se puede realizar la delegación de forma instantánea y sin la necesidad de trámites complejos o la participación de un elevado número de entidades. Adicionalmente, el token de delegación propuesto es perfectamente integrable en las infraestructura de clave pública actual lo que hace que, dado que gran parte de las Administraciones Públicas europeas basan sus sistemas de identidad digital en el uso de la PKI y certificados de identidad X.509, la solución pueda ser puesta en marcha en un entorno real sin necesidad de grandes cambios o modificaciones de comportamiento. En lo referente a la interoperabilidad, se realiza un análisis exhaustivo y la correspondiente evaluación de las principales propuestas de Sistemas de Gestión de Identidad orientados a conseguir la interoperabilidad realizadas hasta la fecha en el marco de la Unión Europea y se propone, a alto nivel, una arquitectura de interoperabilidad para la gestión de identidad en las Administraciones Públicas. Dicha arquitectura es lo suficientemente genérica como para poder ser aplicada tanto en el entorno pan‐Europeo como en los entornos nacionales, autonómicos y locales, de tal forma que la interoperabilidad en la gestión de la identidad esté garantizada en todos los niveles de la Administración Pública. Por último, mediante la integración de la solución de delegación dinámica de identidad y la arquitectura de interoperabilidad propuestas se presenta una solución al problema de la delegación en un escenario pan‐Europeo de gestión de identidad, dando lugar a una arquitectura global de interoperabilidad pan‐Europea con soporte a la delegación de identidad. SUMMARY The i2010 European Union Plan aims to ensure European leadership in ICT and to promote the positive contribution that information and communication technologies can make to the economic, social and personal quality of life, bearing in mind that, to date, success in Europe has been based on promoting fair competition in telecommunications markets and on creating a borderless market for contents and digital media. In this line, the European Commission has established that the different member states should contribute actively to the development and secure use of telematic services among their citizens. More specifically, it is attributed to national, regional and local Public Administrations to have a supportive role of the Information Society, requiring them to gradually provide the citizens with Internet‐based access to all administrative procedures acts. As a first step for the secure use of telematic services offered by public institutions, it is necessary to provide the citizens with a digital identity to enable them to identify themselves unequivocally to a Service Provider or to other citizens. For this reason, most European countries ‐ and others in the rest of the world ‐ are promoting reliable systems for managing electronic identity (eIDM), so that citizens, businesses and government departments (even in different Member States) can identify and certify their operations with precision, speed and simplicity. However, the identity management by Public Administrations is a major challenge that becomes more difficult when interoperability between administrations of different countries is needed, due to the fact that individuals and entities have different identification credentials according to their own national legal framework. Aware of the problem, the European Union has launched a series of projects with the aim of achieving interoperability of eIDMs between public institutions of different Member States. However, the solutions adopted to date are insufficient because they do not foresee all possible cases of user interaction with the institutions. In particular, solutions do not take into account a very important aspect that is offered in different national legal systems, namely, the delegation of identity, by which a citizen can authorize another to act on his/her behalf to access certain services provided by public institutions. In this thesis a collection of contributions that provide solution to different aspects of the aforementioned problems are carried out. The solutions, in global, enable interoperability and identity delegation in some of the Identity Management Systems applied to Public Administration environment. In the case of delegation, a dynamic identity delegation system between generic entities is defined. This system makes it possible to solve the problem of delegated access to telematic services offered by Public Administrations. The proposed solution is based on the generation of a piece of information called delegation token. This delegation token, derived from a Proxy Certificate, allows the establishment of identity delegation by an entity that delegates (delegator) in other entity (delegatee) making use of a subset of delegator attributes. It also establishes restrictions on services that can be used by the delegated entity and the expiry date of delegation. In addition to this, the mechanisms necessary to revoke and check the revocation status of a delegation token are presented. To do this, a solution to univocally identify delegation tokens and the creation of a completely new entity, called Token Delegation Revocation Authority, are proposed. The most remarkable characteristics of the proposed delegation system are its security, enough for it to be used in the Public Administration environment, the fact that it does not require off‐line processes in order to generate the delegation, and the possibility of performing the delegation instantaneously and without neither complex processes nor the intervention of a large number of entities. The proposed delegation token can be completely incorporated into current Public Key Infrastructure (PKI). Thus, since most of the European Public Administrations base their digital identity systems on PKI and X.509 identity certificates, the solution can be adopted in a real environment without great changes or performance modifications. Regarding interoperability, an exhaustive analysis and evaluation of most significant proposals on Identity Management Systems that aim to achieve interoperability carried out in the European Union framework until now are performed. A high level identity management interoperability architecture for Public Administrations is also proposed. This architecture is sufficiently generic to be applied to both pan‐European environment and national, regional or local environments, thus interoperability in identity management at all Public Administration levels is guaranteed. Finally, through the integration of the proposed dynamic identity delegation solution and the high level interoperability architecture, a solution to the problem of identity delegation in a pan‐European identity management environment is suggested, leading to a pan‐European global interoperability architecture with identity delegation support.

El injerto en pepino corto tipo español (Cucumis sativus L.) recomencaciones para su empleo en la zona central española

El injerto en hortalizas es uno de los temas de más actualidad en el panorama hortícola, no solo español, sino occidental, y recalcamos occidental, pues en muchos países que no corresponden a ese ámbito, sobre todo asiáticos: Japón, Corea, China, Filipinas, etc., esta es una técnica que cuenta con una gran difusión desde hace décadas, siendo, por ejemplo en Japón, la mayoría de sus cultivos de cucurbitáceas y solanáceas realizados con planta injertada. A finales de los noventa quedó claro que el empleo de bromuro de metilo tenía una fecha de caducidad y que las zonas que tenían una fuerte dependencia de este desinfectante de suelo debían de buscar alternativas a un plazo lo más corto posible, con un punto añadido sobre etapas anteriores, debían ser alternativas lo más respetuosas posible con el medio ambiente y que no incrementaran, de forma importante, los costes de producción. En la zona centro y concretamente en los invernaderos de la Comunidad de Madrid y zonas cercanas de Toledo y Guadalajara el pepino era y es el cultivo predominante, los horticultores empleaban el bromuro de metilo de forma sistemática para desinfectar sus suelos y la desaparición de este producto les planteaba una gran incertidumbre, lo que llevó a que desde diferentes instancias se buscaran diferentes alternativas. Tras analizar las posibilidades que se podían implementar y conocido el buen resultado que había dado el injerto en sandía en Almería, se decidió acometer los trabajos que conforman esta Tesis Doctoral, planteando en la zona, diferentes ensayos con la idea de conocer, si el injerto en pepino, con los cultivares empleados habitualmente, podía ser una alternativa real para los horticultores, tanto de Madrid, como los de las zonas cercanas de Toledo y Guadalajara. Se pretendía conocer sobre todo las repercusiones agronómicas y si esta técnica podría emplearse en solitario o era necesario complementarla con otras alternativas: desinfectantes químicos, solarización, biofumigación e incluso desinfección con vapor de agua. Los ensayos fueron realizados de forma secuencial entre el año 1999 y el 2011, comprobándose en primer lugar que el empleo de portainjertos híbridos de calabaza era posible con los cultivares de pepino corto tipo español, mayoritariamente empleados en los últimos años del siglo XX y primeros del XXI, fundamentalmente: Serena. Tras los primeros ensayos, Shintoza parecía el portainjerto híbrido de calabaza (Cucurbita maxima x C. moschata) con mejores perspectivas de empleo, pues presentaba la ventaja adicional de ser bien conocido por los semilleros que producen planta injertada al ser, en esos momentos, el portainjerto más empleado en sandía, lo que garantizaba por su lado, su empleo en pepino, y que los horticultores pudiesen disponer de planta injertada. Más adelante los trabajos se encaminaron hacia la determinación de la densidad y tipo de poda más adecuado para la planta injertada, realizándose múltiples ensayos en esta dirección, que culminaron con la conclusión de que el extravigor que los portainjertos conferían a las plantas permitía conducir estas a dos o más brazos (se suelen emplear dos, por mejor adaptación a los trabajos de manejo de la planta por parte de los agricultores), con lo que se podría disminuir la densidad de planta y por tanto ahorrar en este capítulo, cosa que preocupaba y preocupa a los agricultores. Se llegó a determinar que es posible reducir la densidad de plantación en alrededor de un 25%, estando la densidad de brazos más adecuada entre 3 y 3.5 br•m-2. Tras las primeras decisiones tomadas sobre el portainjerto y la densidad más adecuada, se continuó con el estudio de adaptación de estas propuestas a los nuevos cultivares que las empresas de semillas iban proponiendo y los agricultores adoptando. Estas acciones se complementaron con la introducción de nuevos portainjertos susceptibles de sustituir a Shintoza o rotar con él para cambiar de sistema radicular, lo que es conveniente cuando se emplean, como es el caso, portainjertos que no son resistentes a nematodos, principalmente de la especie Meloidogyne incognita, el mayor problema en la zona, debido al suelo. Cultivares como Trópico, en un primer momento, y Urano y Motril más recientemente, se adaptaron muy bien a esta técnica. Entre los portainjertos que mostraron buena adaptación a la técnica de injerto y suficientemente buena compatibilidad con la mayoría de los cultivares ensayados destacan: RS-841, Strongtosa y Camel. Azman también mostró un comportamiento relevante, pero este portainjerto no podrá ser empleado, al ser recientemente retirado del mercado por la empresa que lo obtuvo y comercializó Aunque no era el objetivo principal de esta Tesis Doctoral, se ha comprobado que puede ser interesante combinar el empleo del injerto con otras técnicas alternativas al bromuro de metilo para superar los problemas debidos a enfermedades del suelo o nematodos, pero debe seguirse trabajando pues este es un tema en continua evolución, tanto si se trata de desinfectantes, a la mayoría de los cuales les está siendo retirado el permiso para su comercialización, como de otros métodos como la biofumigación o el empleo de vapor de agua. Queda muy claro que el injerto puede considerarse entre los métodos respetuosos con el medio ambiente, si no el que más, en lo que alternativas al bromuro de metilo se refiere. También en otro momento, se comprobó que con plantas injertadas es posible reducir el aporte de nutrientes, sobre todo nitrógeno, lo que además de un ahorro supone una mejora más desde el punto de vista medioambiental. En definitiva, queda demostrado que es factible el empleo del injerto en pepino corto tipo español, que las selecciones de los híbridos entre Cucurbita maxima y C. moschata que habitualmente se están empleando en sandía son también de aplicación en estos pepinos y que su empleo puede llevarnos a producciones suficientemente remuneradoras, alargándose en muchos casos el ciclo y no modificando, de forma apreciable, la calidad. Queda también demostrado que aunque los portainjertos no sean resistentes a nematodos, su extravigor les hace desarrollarse, desde el punto de vista productivo, suficientemente, llegando por tanto, a “convivir” con ese problema. Al no ser resistentes los portainjertos, y permanecer e incluso agravarse el problema de nematodos es conveniente poder contar con diferentes portainjertos que nos permitan rotar entre ellos y utilizar diferentes sistemas radiculares que harán menos fácil el parasitismo de los nematodos, como recomiendan los nematólogos que se haga. ABSTRACT Vegetable grafting is one of the most current practices in horticulture, not only in Spain, but also in other Western and Asian countries, such as Japan, South Korea, China, the Philippines, etc. This is a decades-old, widespread technique: In fact, most cucurbit and solanaceous crops in Japan and Korea are grafted. At the end of the 1990s, it was clear that methyl bromide had an expiry date. Consequently, the areas strongly dependant on this soil disinfectant had to look for alternatives as quickly as possible. Besides, these had to be as environmentally friendly as possible and should not increase production costs significantly. The cucumber has been and still is the most important crop in greenhouses of the Comunidad de Madrid and in areas near Toledo and Guadalajara. Cucumber growers used methyl bromide systematically to disinfect the soil. The banning of this chemical product brought about uncertainty, which encouraged the search for different alternatives. After analyzing the different possibilities and taking into account the good results of watermelon grafting in Almería, it was decided to carry out the works that make up this doctoral thesis. Different trials were made in order to know if the cultivars used in cucumber grafting might be a real alternative for farmers, not only in Madrid, but also in the areas near Toledo and Guadalajara. The main aim was to assess the agronomic repercussions and whether that technique could be used alone, or if other complementary alternatives, such as chemical disinfectants, solarisation, biofumigation, or even steam disinfection, were necessary. Trials were carried out sequentially from 1999 to 2011. It was observed that the use of pumpkin hybrid rootstocks could be applied to cultivars of Spanish short cucumbers, mainly grown in the late 20th and early 21st centuries eg Serena. After the early trials, Shintoza (Cucurbita maxima x C. moschata), a pumpkin hybrid rootstock, seemed to be the best option, as it had the additional advantage of being well known by nurseries growing grafting plants. Bearing this in mind, Shintoza was then the hybrid rootstock to be used in cucumbers and consequently growers could have grafted plants at their disposal. Later on, research was focused on density and the most adequate type of pruning, by carrying out several trials. These experiments showed that, the extra vigour the rootstocks gave to the plants, allowed them to have two or three stems, (normally nurserymen use two, as it is easier for them to manage the plants). These findings would lead to the lessening the density of the plant and thus reduce costs, something which worried and still worries farmers. It was stated that it would be possible to reduce the density of the plants by about 25%, the optimum density of the stems ranging from 3 to 3.5 stem-m-2. Once decisions were taken both on the rootstock and the appropriate density, we went on to study how to apply these proposals to the new cultivars which the seed companies were proposing and the farmers were applying. These measures were complemented with the introduction of new rootstocks capable of replacing Shintoza, or rotating with it in order to change the root system. This is particularly necessary when rootstocks, non-resistant to nematodes, mainly of the species Meloidogyne incognita, are used. This is the main problem due to the soil of that area. Cultivars such as Trópico, at first, and Urano and Motril, more recently, adapted quite well to this technique. Among the rootstocks which adapted well to grafting and which were compatible with most tested cultivars, were, in particular, RS-841 Strongtosa and Camel. The behaviour of Azman was worth studying, but this rootstock was removed from the market by the company which had bought and commercialized it. Although not the main purpose of the research, it was observed that combining grafting with other alternatives to methyl bromide in order to overcome problems due to soil diseases or nematodes may be worthwhile. However, further research is needed, as this topic is in constant evolution, not only when we come to disinfectants, most of which are being affected by the removal of the permit for commercialization, but also when we refer to other techniques such as biofumigation or the use of steam. Results also showed that grafted plants may reduce the amount of fertilizers, particularly nitrogen, used: This means both saving money and the protection of the environment. We may conclude by saying that grafting Spanish short cucumbers is feasible, that the selections of the hybrids between Cucurbita maxima and C. moschata, habitually used in watermelon grafting, can also be applied to these cucumbers. It can also be concluded that the use of these grafting techniques may lead to profitable yields, by lengthening the growing cycle in many cases and by maintaining the quality to a large extent. Although these rootstocks are not resistant to nematodes, the results showed that their extra vigour enables them to develop in terms of production, and thus they cope with this problem. Since these rootstocks are not resistant to nematodes and the problem with these nematodes may even worsen, it is recommended that different types of rootstocks should be available to enable both the rotation and the use of different root systems, which will encourage the parasitism of nematodes.

Current Trends in Pan-European Identity Management Systems

The demand for electronic identity has grown as a result of governments? promotion of e-Government, in which the citizen-public administration relationship often has a strictly personal nature and requires digital identification systems that are univocal, secure, and global. The management of this identity by public administrations is an important challenge, accentuated when interoperability among public administrations of different countries become necessary. In this paper current trends in pan-euroean identity management systems are analysized and a outlook of the future European scenary is shown.

Magneto-optic current sensor with Faraday mirror for linear birefringence compensation

Fiber optic sensors have some advantages in subjects related with electrical current and magnetic field measurement. In spite of the optical fiber utilization advantages we have to take into account undesirable effects, which are present in real non-ideal optical fibers. In telecommunication and sensor application fields the presence of inherent and induced birefringence is crucial. The presence of birefringence may cause an undesirable change in the polarization state. In order to compensate the linear birefringence a promising method has been chosen. This method employs orthogonal polarization conjugation in the back propagation direction of the light wave in the fiber. A study and a simulation of an experimental setup are realized with the advantage of a significant sensitivity improvement.

Magnetic self-field effects on bare-tether current collection

It has been recently suggested that the magnetic field created by the current in a bare tether could sensibly reduce its electron collection capability in the magnetised ionosphere, a region of closed magnetic surfaces disconnecting the cylinder from infinity. In this paper, the ohmic voltage drop along the tether is taken into account in considering self-field effects. Separate analyses are carried out for the thrust and power generation and drag modes of operation, which are affected in different ways. In the power generation and drag modes, bias decreases as current increases along the tether, starting at the anodic, positively-biased end (upper end in the usual, eastward-flying spacecraft); in the thrust mode of operation, bias increases as current increases along the tether, starting at the lower end. When the ohmic voltage drop is considered, self-field effects are shown to be weak, in all cases, for tape tethers, and for circular cross-section tethers just conductive in a thin outer layer. Self-field effects might become important, in the drag case only, for tethers with fully conductive cross sections that are unrealistically heavy.

Tuning the current ratio of a CPV system to maximize the energy harvesting in a particular location

A method based on experimental data is proposed to optimize the energy harvesting of a silicone-on-glass Fresnel-lens based CPV system. It takes into account the spectral variations along the year in a particular location as well as the thermal and spectral sensitivities of the optics and solar cell. In addition, different alternatives to tune the top/middle subcells current ratio in a CPV module are analyzed and their capacity to maximize the annually produced energy is quantified.

Assessing the impact of adaptive accessibility on the optimal transport policy implementation by using an integrated land-use/transport model for Madrid

Accessibility is an essential concept widely used to evaluate the impact of land-use and transport strategies in transport and urban planning. Accessibility is typically evaluated by using a transport model or a land-use model independently or successively without a feedback loop, thus neglecting the interaction effects between the two systems and the induced competition effects among opportunities due to accessibility improvements. More than a mere methodological curiosity, failure to account for land- use/transport interactions and the competition effect may result in large underestimation of the policy effects. With the recent development of land-use and transport interaction (LUTI) models, there is a growing interest in using these models to adequately measure accessibility and evaluate its impact. The current study joins this research stream by embedding an accessibility measure in a LUTI model with two main aims. The first aim is to account for adaptive accessibility, namely the adjustment of the potential accessibility due to the effect of competition among opportunities (e.g., workplaces) as a result of improved accessibility. LUTI models are particularly suitable for assessing adaptive accessibility because the competition factor is a function of the number of jobs, which is related to land-use attractiveness and the number of workers which is related, among other factors, to the transport demand. The second aim is to identify the optimal implementation scenario of policy measures on the basis of the potential and adaptive accessibility and analyse the results in terms of social welfare and accessibility. The metropolitan area of Madrid is used as a case-study and two transport policy instruments, namely a cordon toll and bus frequency increase, have been chosen for the simulation study in order to present the usefulness of the approach to urban planners and policy makers. The MARS model (Metropolitan Activity Relocation Simulator) calibrated for Madrid was employed as the analysis tool. The impact of accessibility is embedded in the model through a social welfare function that includes not only costs and benefits to both road users and transport operators, but also costs and benefits for the government and society in general (external costs). An optimisation procedure is performed by the MARS model for maximizing the value of objective function in order to find the best (optimal) policy imp lementations intensity (i.e., price, frequency). Last, the two policy strategies are evaluated in terms of their accessibility. Results show that the accessibility with competition factor influences the optimal policy implementation level and also generates different results in terms of social welfare. In addition, mapping the difference between the potential and the adaptive accessibility indicators shows that the main changes occur in areas where there is a strong competition among land-use opportunities.

A new analog trigger system for the Cherenkov Telescope array

La astronomía de rayos γ estudia las partículas más energéticas que llegan a la Tierra desde el espacio. Estos rayos γ no se generan mediante procesos térmicos en simples estrellas, sino mediante mecanismos de aceleración de partículas en objetos celestes como núcleos de galaxias activos, púlsares, supernovas, o posibles procesos de aniquilación de materia oscura. Los rayos γ procedentes de estos objetos y sus características proporcionan una valiosa información con la que los científicos tratan de comprender los procesos físicos que ocurren en ellos y desarrollar modelos teóricos que describan su funcionamiento con fidelidad. El problema de observar rayos γ es que son absorbidos por las capas altas de la atmósfera y no llegan a la superficie (de lo contrario, la Tierra será inhabitable). De este modo, sólo hay dos formas de observar rayos γ embarcar detectores en satélites, u observar los efectos secundarios que los rayos γ producen en la atmósfera. Cuando un rayo γ llega a la atmósfera, interacciona con las partículas del aire y genera un par electrón - positrón, con mucha energía. Estas partículas secundarias generan a su vez más partículas secundarias cada vez menos energéticas. Estas partículas, mientras aún tienen energía suficiente para viajar más rápido que la velocidad de la luz en el aire, producen una radiación luminosa azulada conocida como radiación Cherenkov durante unos pocos nanosegundos. Desde la superficie de la Tierra, algunos telescopios especiales, conocidos como telescopios Cherenkov o IACTs (Imaging Atmospheric Cherenkov Telescopes), son capaces de detectar la radiación Cherenkov e incluso de tomar imágenes de la forma de la cascada Cherenkov. A partir de estas imágenes es posible conocer las principales características del rayo γ original, y con suficientes rayos se pueden deducir características importantes del objeto que los emitió, a cientos de años luz de distancia. Sin embargo, detectar cascadas Cherenkov procedentes de rayos γ no es nada fácil. Las cascadas generadas por fotones γ de bajas energías emiten pocos fotones, y durante pocos nanosegundos, y las correspondientes a rayos γ de alta energía, si bien producen más electrones y duran más, son más improbables conforme mayor es su energía. Esto produce dos líneas de desarrollo de telescopios Cherenkov: Para observar cascadas de bajas energías son necesarios grandes reflectores que recuperen muchos fotones de los pocos que tienen estas cascadas. Por el contrario, las cascadas de altas energías se pueden detectar con telescopios pequeños, pero conviene cubrir con ellos una superficie grande en el suelo para aumentar el número de eventos detectados. Con el objetivo de mejorar la sensibilidad de los telescopios Cherenkov actuales, en el rango de energía alto (> 10 TeV), medio (100 GeV - 10 TeV) y bajo (10 GeV - 100 GeV), nació el proyecto CTA (Cherenkov Telescope Array). Este proyecto en el que participan más de 27 países, pretende construir un observatorio en cada hemisferio, cada uno de los cuales contará con 4 telescopios grandes (LSTs), unos 30 medianos (MSTs) y hasta 70 pequeños (SSTs). Con un array así, se conseguirán dos objetivos. En primer lugar, al aumentar drásticamente el área de colección respecto a los IACTs actuales, se detectarán más rayos γ en todos los rangos de energía. En segundo lugar, cuando una misma cascada Cherenkov es observada por varios telescopios a la vez, es posible analizarla con mucha más precisión gracias a las técnicas estereoscópicas. La presente tesis recoge varios desarrollos técnicos realizados como aportación a los telescopios medianos y grandes de CTA, concretamente al sistema de trigger. Al ser las cascadas Cherenkov tan breves, los sistemas que digitalizan y leen los datos de cada píxel tienen que funcionar a frecuencias muy altas (≈1 GHz), lo que hace inviable que funcionen de forma continua, ya que la cantidad de datos guardada será inmanejable. En su lugar, las señales analógicas se muestrean, guardando las muestras analógicas en un buffer circular de unos pocos µs. Mientras las señales se mantienen en el buffer, el sistema de trigger hace un análisis rápido de las señales recibidas, y decide si la imagen que hay en el buér corresponde a una cascada Cherenkov y merece ser guardada, o por el contrario puede ignorarse permitiendo que el buffer se sobreescriba. La decisión de si la imagen merece ser guardada o no, se basa en que las cascadas Cherenkov producen detecciones de fotones en píxeles cercanos y en tiempos muy próximos, a diferencia de los fotones de NSB (night sky background), que llegan aleatoriamente. Para detectar cascadas grandes es suficiente con comprobar que más de un cierto número de píxeles en una región hayan detectado más de un cierto número de fotones en una ventana de tiempo de algunos nanosegundos. Sin embargo, para detectar cascadas pequeñas es más conveniente tener en cuenta cuántos fotones han sido detectados en cada píxel (técnica conocida como sumtrigger). El sistema de trigger desarrollado en esta tesis pretende optimizar la sensibilidad a bajas energías, por lo que suma analógicamente las señales recibidas en cada píxel en una región de trigger y compara el resultado con un umbral directamente expresable en fotones detectados (fotoelectrones). El sistema diseñado permite utilizar regiones de trigger de tamaño seleccionable entre 14, 21 o 28 píxeles (2, 3, o 4 clusters de 7 píxeles cada uno), y con un alto grado de solapamiento entre ellas. De este modo, cualquier exceso de luz en una región compacta de 14, 21 o 28 píxeles es detectado y genera un pulso de trigger. En la versión más básica del sistema de trigger, este pulso se distribuye por toda la cámara de forma que todos los clusters sean leídos al mismo tiempo, independientemente de su posición en la cámara, a través de un delicado sistema de distribución. De este modo, el sistema de trigger guarda una imagen completa de la cámara cada vez que se supera el número de fotones establecido como umbral en una región de trigger. Sin embargo, esta forma de operar tiene dos inconvenientes principales. En primer lugar, la cascada casi siempre ocupa sólo una pequeña zona de la cámara, por lo que se guardan muchos píxeles sin información alguna. Cuando se tienen muchos telescopios como será el caso de CTA, la cantidad de información inútil almacenada por este motivo puede ser muy considerable. Por otro lado, cada trigger supone guardar unos pocos nanosegundos alrededor del instante de disparo. Sin embargo, en el caso de cascadas grandes la duración de las mismas puede ser bastante mayor, perdiéndose parte de la información debido al truncamiento temporal. Para resolver ambos problemas se ha propuesto un esquema de trigger y lectura basado en dos umbrales. El umbral alto decide si hay un evento en la cámara y, en caso positivo, sólo las regiones de trigger que superan el nivel bajo son leídas, durante un tiempo más largo. De este modo se evita guardar información de píxeles vacíos y las imágenes fijas de las cascadas se pueden convertir en pequeños \vídeos" que representen el desarrollo temporal de la cascada. Este nuevo esquema recibe el nombre de COLIBRI (Concept for an Optimized Local Image Building and Readout Infrastructure), y se ha descrito detalladamente en el capítulo 5. Un problema importante que afecta a los esquemas de sumtrigger como el que se presenta en esta tesis es que para sumar adecuadamente las señales provenientes de cada píxel, estas deben tardar lo mismo en llegar al sumador. Los fotomultiplicadores utilizados en cada píxel introducen diferentes retardos que deben compensarse para realizar las sumas adecuadamente. El efecto de estos retardos ha sido estudiado, y se ha desarrollado un sistema para compensarlos. Por último, el siguiente nivel de los sistemas de trigger para distinguir efectivamente las cascadas Cherenkov del NSB consiste en buscar triggers simultáneos (o en tiempos muy próximos) en telescopios vecinos. Con esta función, junto con otras de interfaz entre sistemas, se ha desarrollado un sistema denominado Trigger Interface Board (TIB). Este sistema consta de un módulo que irá montado en la cámara de cada LST o MST, y que estará conectado mediante fibras ópticas a los telescopios vecinos. Cuando un telescopio tiene un trigger local, este se envía a todos los vecinos conectados y viceversa, de modo que cada telescopio sabe si sus vecinos han dado trigger. Una vez compensadas las diferencias de retardo debidas a la propagación en las fibras ópticas y de los propios fotones Cherenkov en el aire dependiendo de la dirección de apuntamiento, se buscan coincidencias, y en el caso de que la condición de trigger se cumpla, se lee la cámara en cuestión, de forma sincronizada con el trigger local. Aunque todo el sistema de trigger es fruto de la colaboración entre varios grupos, fundamentalmente IFAE, CIEMAT, ICC-UB y UCM en España, con la ayuda de grupos franceses y japoneses, el núcleo de esta tesis son el Level 1 y la Trigger Interface Board, que son los dos sistemas en los que que el autor ha sido el ingeniero principal. Por este motivo, en la presente tesis se ha incluido abundante información técnica relativa a estos sistemas. Existen actualmente importantes líneas de desarrollo futuras relativas tanto al trigger de la cámara (implementación en ASICs), como al trigger entre telescopios (trigger topológico), que darán lugar a interesantes mejoras sobre los diseños actuales durante los próximos años, y que con suerte serán de provecho para toda la comunidad científica participante en CTA. ABSTRACT -ray astronomy studies the most energetic particles arriving to the Earth from outer space. This -rays are not generated by thermal processes in mere stars, but by means of particle acceleration mechanisms in astronomical objects such as active galactic nuclei, pulsars, supernovas or as a result of dark matter annihilation processes. The γ rays coming from these objects and their characteristics provide with valuable information to the scientist which try to understand the underlying physical fundamentals of these objects, as well as to develop theoretical models able to describe them accurately. The problem when observing rays is that they are absorbed in the highest layers of the atmosphere, so they don't reach the Earth surface (otherwise the planet would be uninhabitable). Therefore, there are only two possible ways to observe γ rays: by using detectors on-board of satellites, or by observing their secondary effects in the atmosphere. When a γ ray reaches the atmosphere, it interacts with the particles in the air generating a highly energetic electron-positron pair. These secondary particles generate in turn more particles, with less energy each time. While these particles are still energetic enough to travel faster than the speed of light in the air, they produce a bluish radiation known as Cherenkov light during a few nanoseconds. From the Earth surface, some special telescopes known as Cherenkov telescopes or IACTs (Imaging Atmospheric Cherenkov Telescopes), are able to detect the Cherenkov light and even to take images of the Cherenkov showers. From these images it is possible to know the main parameters of the original -ray, and with some -rays it is possible to deduce important characteristics of the emitting object, hundreds of light-years away. However, detecting Cherenkov showers generated by γ rays is not a simple task. The showers generated by low energy -rays contain few photons and last few nanoseconds, while the ones corresponding to high energy -rays, having more photons and lasting more time, are much more unlikely. This results in two clearly differentiated development lines for IACTs: In order to detect low energy showers, big reflectors are required to collect as much photons as possible from the few ones that these showers have. On the contrary, small telescopes are able to detect high energy showers, but a large area in the ground should be covered to increase the number of detected events. With the aim to improve the sensitivity of current Cherenkov showers in the high (> 10 TeV), medium (100 GeV - 10 TeV) and low (10 GeV - 100 GeV) energy ranges, the CTA (Cherenkov Telescope Array) project was created. This project, with more than 27 participating countries, intends to build an observatory in each hemisphere, each one equipped with 4 large size telescopes (LSTs), around 30 middle size telescopes (MSTs) and up to 70 small size telescopes (SSTs). With such an array, two targets would be achieved. First, the drastic increment in the collection area with respect to current IACTs will lead to detect more -rays in all the energy ranges. Secondly, when a Cherenkov shower is observed by several telescopes at the same time, it is possible to analyze it much more accurately thanks to the stereoscopic techniques. The present thesis gathers several technical developments for the trigger system of the medium and large size telescopes of CTA. As the Cherenkov showers are so short, the digitization and readout systems corresponding to each pixel must work at very high frequencies (_ 1 GHz). This makes unfeasible to read data continuously, because the amount of data would be unmanageable. Instead, the analog signals are sampled, storing the analog samples in a temporal ring buffer able to store up to a few _s. While the signals remain in the buffer, the trigger system performs a fast analysis of the signals and decides if the image in the buffer corresponds to a Cherenkov shower and deserves to be stored, or on the contrary it can be ignored allowing the buffer to be overwritten. The decision of saving the image or not, is based on the fact that Cherenkov showers produce photon detections in close pixels during near times, in contrast to the random arrival of the NSB phtotons. Checking if more than a certain number of pixels in a trigger region have detected more than a certain number of photons during a certain time window is enough to detect large showers. However, taking also into account how many photons have been detected in each pixel (sumtrigger technique) is more convenient to optimize the sensitivity to low energy showers. The developed trigger system presented in this thesis intends to optimize the sensitivity to low energy showers, so it performs the analog addition of the signals received in each pixel in the trigger region and compares the sum with a threshold which can be directly expressed as a number of detected photons (photoelectrons). The trigger system allows to select trigger regions of 14, 21, or 28 pixels (2, 3 or 4 clusters with 7 pixels each), and with extensive overlapping. In this way, every light increment inside a compact region of 14, 21 or 28 pixels is detected, and a trigger pulse is generated. In the most basic version of the trigger system, this pulse is just distributed throughout the camera in such a way that all the clusters are read at the same time, independently from their position in the camera, by means of a complex distribution system. Thus, the readout saves a complete camera image whenever the number of photoelectrons set as threshold is exceeded in a trigger region. However, this way of operating has two important drawbacks. First, the shower usually covers only a little part of the camera, so many pixels without relevant information are stored. When there are many telescopes as will be the case of CTA, the amount of useless stored information can be very high. On the other hand, with every trigger only some nanoseconds of information around the trigger time are stored. In the case of large showers, the duration of the shower can be quite larger, loosing information due to the temporal cut. With the aim to solve both limitations, a trigger and readout scheme based on two thresholds has been proposed. The high threshold decides if there is a relevant event in the camera, and in the positive case, only the trigger regions exceeding the low threshold are read, during a longer time. In this way, the information from empty pixels is not stored and the fixed images of the showers become to little \`videos" containing the temporal development of the shower. This new scheme is named COLIBRI (Concept for an Optimized Local Image Building and Readout Infrastructure), and it has been described in depth in chapter 5. An important problem affecting sumtrigger schemes like the one presented in this thesis is that in order to add the signals from each pixel properly, they must arrive at the same time. The photomultipliers used in each pixel introduce different delays which must be compensated to perform the additions properly. The effect of these delays has been analyzed, and a delay compensation system has been developed. The next trigger level consists of looking for simultaneous (or very near in time) triggers in neighbour telescopes. These function, together with others relating to interfacing different systems, have been developed in a system named Trigger Interface Board (TIB). This system is comprised of one module which will be placed inside the LSTs and MSTs cameras, and which will be connected to the neighbour telescopes through optical fibers. When a telescope receives a local trigger, it is resent to all the connected neighbours and vice-versa, so every telescope knows if its neighbours have been triggered. Once compensated the delay differences due to propagation in the optical fibers and in the air depending on the pointing direction, the TIB looks for coincidences, and in the case that the trigger condition is accomplished, the camera is read a fixed time after the local trigger arrived. Despite all the trigger system is the result of the cooperation of several groups, specially IFAE, Ciemat, ICC-UB and UCM in Spain, with some help from french and japanese groups, the Level 1 and the Trigger Interface Board constitute the core of this thesis, as they have been the two systems designed by the author of the thesis. For this reason, a large amount of technical information about these systems has been included. There are important future development lines regarding both the camera trigger (implementation in ASICS) and the stereo trigger (topological trigger), which will produce interesting improvements for the current designs during the following years, being useful for all the scientific community participating in CTA.

Energy saving potential of semi-transparent photovoltaic elements for building integration

Within the building energy saving strategies, BIPV (building integrated photovoltaic systems) present a promising potential based on the close relationship existing between these multifunctional systems and the overall building energy balance. Building integration of STPV (semi-transparent photovoltaic) elements affects deeply the building energy demand since it influences the heating, cooling and lighting loads as well as the local electricity generation. This work analyses over different window-to-wall ratios the overall energy performance of five STPV elements, each element having a specific degree of transparency, in order to assess the energy saving potential compared to a conventional solar control glass compliant with the local technical standard. The prior optical characterization, focused to measure the spectral properties of the elements, was experimentally undertaken. The obtained data were used to perform simulations based on a reference office building using a package of specific software tools (DesignBuilder, EnergyPlus, PVsyst, and COMFEN) to take proper account of the STPV peculiarities. To evaluate the global energy performance of the STPV elements a new Energy Balance Index was formulated. The results show that for intermediate and large façade openings the energy saving potential provided by the STPV solutions ranges between 18% and 59% compared to the reference glass.

Impact of standards in European open data catalogues: a multilingual perspective of DCAT

Within the European Union, member states are setting up official data catalogues as entry points to access PSI (Public Sector Information). In this context, it is important to describe the metadata of these data portals, i.e., of data catalogs, and allow for interoperability among them. To tackle these issues, the Government Linked Data Working Group developed DCAT (Data Catalog Vocabulary), an RDF vocabulary for describing the metadata of data catalogs. This topic report analyzes the current use of the DCAT vocabulary in several European data catalogs and proposes some recommendations to deal with an inconsistent use of the metadata across countries. The enrichment of such metadata vocabularies with multilingual descriptions, as well as an account for cultural divergences, is seen as a necessary step to guarantee interoperability and ensure wider adoption.