Sustainable Air Traffic Management System Development Methodology

As it is defined in ATM 2000+ Strategy (Eurocontrol 2001), the mission of the Air Traffic Management (ATM) System is: “For all the phases of a flight, the ATM system should facilitate a safe, efficient, and expedite traffic flow, through the provision of adaptable ATM services that can be dimensioned in relation to the requirements of all the users and areas of the European air space. The ATM services should comply with the demand, be compatible, operate under uniform principles, respect the environment and satisfy the national security requirements.” The objective of this paper is to present a methodology designed to evaluate the status of the ATM system in terms of the relationship between the offered capacity and traffic demand, identifying weakness areas and proposing solutions. The first part of the methodology relates to the characterization and evaluation of the current system, while a second part proposes an approach to analyze the possible development limit. As part of the work, general criteria are established to define the framework in which the analysis and diagnostic methodology presented is placed. They are: the use of Air Traffic Control (ATC) sectors as analysis unit, the presence of network effects, the tactical focus, the relative character of the analysis, objectivity and a high level assessment that allows assumptions on the human and Communications, Navigation and Surveillance (CNS) elements, considered as the typical high density air traffic resources. The steps followed by the methodology start with the definition of indicators and metrics, like the nominal criticality or the nominal efficiency of a sector; scenario characterization where the necessary data is collected; network effects analysis to study the relations among the constitutive elements of the ATC system; diagnostic by means of the “System Status Diagram”; analytical study of the ATC system development limit; and finally, formulation of conclusions and proposal for improvement. This methodology was employed by Aena (Spanish Airports Manager and Air Navigation Service Provider) and INECO (Spanish Transport Engineering Company) in the analysis of the Spanish ATM System in the frame of the Spanish airspace capacity sustainability program, although it could be applied elsewhere.

Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder

Con esta tesis ”Desarrollo de una Teoría Uniforme de la Difracción para el Análisis de los Campos Electromagnéticos Dispersados y Superficiales sobre un Cilindro” hemos iniciado una nueva línea de investigación que trata de responder a la siguiente pregunta: ¿cuál es la impedancia de superficie que describe una estructura de conductor eléctrico perfecto (PEC) convexa recubierta por un material no conductor? Este tipo de estudios tienen interés hoy en día porque ayudan a predecir el campo electromagnético incidente, radiado o que se propaga sobre estructuras metálicas y localmente convexas que se encuentran recubiertas de algún material dieléctrico, o sobre estructuras metálicas con pérdidas, como por ejemplo se necesita en determinadas aplicaciones aeroespaciales, marítimas o automovilísticas. Además, desde un punto de vista teórico, la caracterización de la impedancia de superficie de una estructura PEC recubierta o no por un dieléctrico es una generalización de varias soluciones que tratan ambos tipos de problemas por separado. En esta tesis se desarrolla una teoría uniforme de la difracción (UTD) para analizar el problema canónico del campo electromagnético dispersado y superficial en un cilindro circular eléctricamente grande con una condición de contorno de impedancia (IBC) para frecuencias altas. Construir una solución basada en UTD para este problema canónico es crucial en el desarrollo de un método UTD para el caso más general de una superficie arbitrariamente convexa, mediante el uso del principio de localización de los campos electromagnéticos a altas frecuencias. Esta tesis doctoral se ha llevado a cabo a través de una serie de hitos que se enumeran a continuación, enfatizando las contribuciones a las que ha dado lugar. Inicialmente se realiza una revisión en profundidad del estado del arte de los métodos asintóticos con numerosas referencias. As í, cualquier lector novel puede llegar a conocer la historia de la óptica geométrica (GO) y la teoría geométrica de la difracción (GTD), que dieron lugar al desarrollo de la UTD. Después, se investiga ampliamente la UTD y los trabajos más importantes que pueden encontrarse en la literatura. As í, este capítulo, nos coloca en la posición de afirmar que, hasta donde nosotros conocemos, nadie ha intentado antes llevar a cabo una investigación rigurosa sobre la caracterización de la impedancia de superficie de una estructura PEC recubierta por un material dieléctrico, utilizando para ello la UTD. Primero, se desarrolla una UTD para el problema canónico de la dispersión electromagnética de un cilindro circular eléctricamente grande con una IBC uniforme, cuando es iluminado por una onda plana con incidencia oblicua a frecuencias altas. La solución a este problema canónico se construye a partir de una solución exacta mediante una expansión de autofunciones de propagación radial. Entonces, ésta se convierte en una nueva expansión de autofunciones de propagación circunferencial muy apropiada para cilindros grandes, a través de la transformación de Watson. De esta forma, la expresión del campo se reduce a una integral que se evalúa asintóticamente, para altas frecuencias, de manera uniforme. El resultado se expresa según el trazado de rayos descrito en la UTD. La solución es uniforme porque tiene la importante propiedad de mantenerse continua a lo largo de la región de transición, a ambos lados de la superficie del contorno de sombra. Fuera de la región de transición la solución se reduce al campo incidente y reflejado puramente ópticos en la región iluminada del cilindro, y al campo superficial difractado en la región de sombra. Debido a la IBC el campo dispersado contiene una componente contrapolar a causa de un acoplamiento entre las ondas TEz y TMz (donde z es el eje del cilindro). Esta componente contrapolar desaparece cuando la incidencia es normal al cilindro, y también en la región iluminada cuando la incidencia es oblicua donde el campo se reduce a la solución de GO. La solución UTD presenta una muy buena exactitud cuando se compara numéricamente con una solución de referencia exacta. A continuación, se desarrolla una IBC efectiva para el cálculo del campo electromagnético dispersado en un cilindro circular PEC recubierto por un dieléctrico e iluminado por una onda plana incidiendo oblicuamente. Para ello se derivan dos impedancias de superficie en relación directa con las ondas creeping y de superficie TM y TE que se excitan en un cilindro recubierto por un material no conductor. Las impedancias de superficie TM y TE están acopladas cuando la incidencia es oblicua, y dependen de la geometría del problema y de los números de onda. Además, se ha derivado una impedancia de superficie constante, aunque con diferente valor cuando el observador se encuentra en la zona iluminada o en la zona de sombra. Después, se presenta una solución UTD para el cálculo de la dispersión de una onda plana con incidencia oblicua sobre un cilindro eléctricamente grande y convexo, mediante la generalización del problema canónico correspondiente al cilindro circular. La solución asintótica es uniforme porque se mantiene continua a lo largo de la región de transición, en las inmediaciones del contorno de sombra, y se reduce a la solución de rayos ópticos en la zona iluminada y a la contribución de las ondas de superficie dentro de la zona de sombra, lejos de la región de transición. Cuando se usa cualquier material no conductor se excita una componente contrapolar que tiende a desaparecer cuando la incidencia es normal al cilindro y en la región iluminada. Se discuten ampliamente las limitaciones de las fórmulas para la impedancia de superficie efectiva, y se compara la solución UTD con otras soluciones de referencia, donde se observa una muy buena concordancia. Y en tercer lugar, se presenta una aproximación para una impedancia de superficie efectiva para el cálculo de los campos superficiales en un cilindro circular conductor recubierto por un dieléctrico. Se discuten las principales diferencias que existen entre un cilindro PEC recubierto por un dieléctrico desde un punto de vista riguroso y un cilindro con una IBC. Mientras para un cilindro de impedancia se considera una impedancia de superficie constante o uniforme, para un cilindro conductor recubierto por un dieléctrico se derivan dos impedancias de superficie. Estas impedancias de superficie están asociadas a los modos de ondas creeping TM y TE excitadas en un cilindro, y dependen de la posición y de la orientación del observador y de la fuente. Con esto en mente, se deriva una solución UTD con IBC para los campos superficiales teniendo en cuenta las dependencias de la impedancia de superficie. La expansión asintótica se realiza, mediante la transformación de Watson, sobre la representación en serie de las funciones de Green correspondientes, evitando as í calcular las derivadas de orden superior de las integrales de tipo Fock, y dando lugar a una solución rápida y precisa. En los ejemplos numéricos realizados se observa una muy buena precisión cuando el cilindro y la separación entre el observador y la fuente son grandes. Esta solución, junto con el método de los momentos (MoM), se puede aplicar para el cálculo eficiente del acoplamiento mutuo de grandes arrays conformados de antenas de parches. Los métodos propuestos basados en UTD para el cálculo del campo electromagnético dispersado y superficial sobre un cilindro PEC recubierto de dieléctrico con una IBC efectiva suponen un primer paso hacia la generalización de una solución UTD para superficies metálicas convexas arbitrarias cubiertas por un material no conductor e iluminadas por una fuente electromagnética arbitraria. ABSTRACT With this thesis ”Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder” we have initiated a line of investigation whose goal is to answer the following question: what is the surface impedance which describes a perfect electric conductor (PEC) convex structure covered by a material coating? These studies are of current and future interest for predicting the electromagnetic (EM) fields incident, radiating or propagating on locally smooth convex parts of highly metallic structures with a material coating, or by a lossy metallic surfaces, as for example in aerospace, maritime and automotive applications. Moreover, from a theoretical point of view, the surface impedance characterization of PEC surfaces with or without a material coating represents a generalization of independent solutions for both type of problems. A uniform geometrical theory of diffraction (UTD) is developed in this thesis for analyzing the canonical problem of EM scattered and surface field by an electrically large circular cylinder with an impedance boundary condition (IBC) in the high frequency regime, by means of a surface impedance characterization. The construction of a UTD solution for this canonical problem is crucial for the development of the corresponding UTD solution for the more general case of an arbitrary smooth convex surface, via the principle of the localization of high frequency EM fields. The development of the present doctoral thesis has been carried out through a series of landmarks that are enumerated as follows, emphasizing the main contributions that this work has given rise to. Initially, a profound revision is made in the state of art of asymptotic methods where numerous references are given. Thus, any reader may know the history of geometrical optics (GO) and geometrical theory of diffraction (GTD), which led to the development of UTD. Then, the UTD is deeply investigated and the main studies which are found in the literature are shown. This chapter situates us in the position to state that, as far as we know, nobody has attempted before to perform a rigorous research about the surface impedance characterization for material-coated PEC convex structures via UTD. First, a UTD solution is developed for the canonical problem of the EM scattering by an electrically large circular cylinder with a uniform IBC, when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transformation, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the GO or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution. Then, an effective IBC is developed for the EM scattered field on a coated PEC circular cylinder illuminated by an obliquely incident plane wave. Two surface impedances are derived in a direct relation with the TM and TE surface and creeping wave modes excited on a coated cylinder. The TM and TE surface impedances are coupled at oblique incidence, and depend on the geometry of the problem and the wave numbers. Nevertheless, a constant surface impedance is found, although with a different value when the observation point lays in the lit or in the shadow region. Then, a UTD solution for the scattering of an obliquely incident plane wave on an electrically large smooth convex coated PEC cylinder is introduced, via a generalization of the canonical circular cylinder problem. The asymptotic solution is uniform because it remains continuous across the transition region, in the vicinity of the shadow boundary, and it recovers the ray optical solution in the deep lit region and the creeping wave formulation within the deep shadow region. When a coating is present a cross-polar field term is excited, which vanishes at normal incidence and in the deep lit region. The limitations of the effective surface impedance formulas are discussed, and the UTD solution is compared with some reference solutions where a very good agreement is met. And in third place, an effective surface impedance approach is introduced for determining surface fields on an electrically large coated metallic circular cylinder. Differences in analysis of rigorouslytreated coated metallic cylinders and cylinders with an IBC are discussed. While for the impedance cylinder case a single constant or uniform surface impedance is considered, for the coated metallic cylinder case two surface impedances are derived. These are associated with the TM and TE creeping wave modes excited on a cylinder and depend on observation and source positions and orientations. With this in mind, a UTD based method with IBC is derived for the surface fields by taking into account the surface impedance variation. The asymptotic expansion is performed, via the Watson transformation, over the appropriate series representation of the Green’s functions, thus avoiding higher-order derivatives of Fock-type integrals, and yielding a fast and an accurate solution. Numerical examples reveal a very good accuracy for large cylinders when the separation between the observation and the source point is large. Thus, this solution could be efficiently applied in mutual coupling analysis, along with the method of moments (MoM), of large conformal microstrip array antennas. The proposed UTD methods for scattered and surface EM field analysis on a coated PEC cylinder with an effective IBC are considered the first steps toward the generalization of a UTD solution for large arbitrarily convex smooth metallic surfaces covered by a material coating and illuminated by an arbitrary EM source.

Explicit Expressions for Solar Panel Equivalent Circuit Parameters Based on Analytical Formulation and the Lambert W-Function

Due to the high dependence of photovoltaic energy efficiency on environmental conditions (temperature, irradiation...), it is quite important to perform some analysis focusing on the characteristics of photovoltaic devices in order to optimize energy production, even for small-scale users. The use of equivalent circuits is the preferred option to analyze solar cells/panels performance. However, the aforementioned small-scale users rarely have the equipment or expertise to perform large testing/calculation campaigns, the only information available for them being the manufacturer datasheet. The solution to this problem is the development of new and simple methods to define equivalent circuits able to reproduce the behavior of the panel for any working condition, from a very small amount of information. In the present work a direct and completely explicit method to extract solar cell parameters from the manufacturer datasheet is presented and tested. This method is based on analytical formulation which includes the use of the Lambert W-function to turn the series resistor equation explicit. The presented method is used to analyze commercial solar panel performance (i.e., the current-voltage–I-V–curve) at different levels of irradiation and temperature. The analysis performed is based only on the information included in the manufacturer’s datasheet.

The Role of Knowledge Modeling Techniques in Software Development: A General Approach Based on a Knowledge Management Tool

The aim of the paper is to discuss the use of knowledge models to formulate general applications. First, the paper presents the recent evolution of the software field where increasing attention is paid to conceptual modeling. Then, the current state of knowledge modeling techniques is described where increased reliability is available through the modern knowledge acquisition techniques and supporting tools. The KSM (Knowledge Structure Manager) tool is described next. First, the concept of knowledge area is introduced as a building block where methods to perform a collection of tasks are included together with the bodies of knowledge providing the basic methods to perform the basic tasks. Then, the CONCEL language to define vocabularies of domains and the LINK language for methods formulation are introduced. Finally, the object oriented implementation of a knowledge area is described and a general methodology for application design and maintenance supported by KSM is proposed. To illustrate the concepts and methods, an example of system for intelligent traffic management in a road network is described. This example is followed by a proposal of generalization for reuse of the resulting architecture. Finally, some concluding comments are proposed about the feasibility of using the knowledge modeling tools and methods for general application design.

Explicit expressions for solar panel equivalent circuit parameters based on analytical formulation and the Lambert W - Function

Due to the high dependence of photovoltaic energy efficiency on environmental conditions (temperature, irradiation...), it is quite important to perform some analysis focusing on the characteristics of photovoltaic devices in order to optimize energy production, even for small-scale users. The use of equivalent circuits is the preferred option to analyze solar cells/panels performance. However, the aforementioned small-scale users rarely have the equipment or expertise to perform large testing/calculation campaigns, the only information available for them being the manufacturer datasheet. The solution to this problem is the development of new and simple methods to define equivalent circuits able to reproduce the behavior of the panel for any working condition, from a very small amount of information. In the present work a direct and completely explicit method to extract solar cell parameters from the manufacturer datasheet is presented and tested. This method is based on analytical formulation which includes the use of the Lambert W-function to turn the series resistor equation explicit. The presented method is used to analyze the performance (i.e., the I - V curve) of a commercial solar panel at different levels of irradiation and temperature. The analysis performed is based only on the information included in the manufacturer's datasheet.

A CAD development strategy for the next years

This paper suggests a new strategy to develop CAD applications taking into account some of the most interesting proposals which have recently appeared in the technology development arena. Programming languages, operating systems, user devices, software architecture, user interfaces and user experience are among the elements which are considered for a new development framework. This strategy considers the organizational and architectural aspects of the CAD application together with the development framework. The architectural and organizational aspects are based on the programmed design concept, which can be implemented by means of a three-level software architecture. These levels are the conceptual level based on a declarative language, the mathematical level based on the geometric formulation of the product model and the visual level based on the polyhedral representation of the model as required by the graphic card. The development framework which has been considered is Windows 8. This operating system offers three development environments, one for web pplications (HTML5 + CSS3 + JavaScript), and other for native applications C/C++) and of course yet another for .NET applications (C#, VB, F#, etc.). The use rinterface and user experience for non-web application is described ith XAML (a well known declarative XML language) and the 3D API for games and design applications is DirectX. Additionally, Windows 8 facilitates the use of hybrid solutions, in which native and managed code can interoperate easily. Some of the most remarkable advantages of this strategy are the possibility of targeting both desktop and touch screen devices with the same development framework, the usage of several programming paradigms to apply the most appropriate language to each domain and the multilevel segmentation of developers and designers to facilitate the implementation of an open network of collaborators.

Mathematical development of stress-strain law for rock block contacts

The fracture behavior of rock block contacts has been studied for many years. Unfortunately, up to now, there is not a rigorous formulation or a solid theoretical foundation to support it. A mathematical development to represent the failure mechanism which occurs in the contacts between rock blocks is presented to evaluate the performance of breaking mechanism of such blocks relating it to the morphology of the contact and mechanical parameters of the material. The examined framework includes the evaluation of the surface roughness of first order in the failure mechanism of the granular particles of large size and the development of a theoretical model describing the morphology of the contact between rock blocks.

Development of somatic embryogenesis for cloning and conservation of mature holm oak trees (Quercus ilex L.)

La encina (Quercus ilex L.) es una de las especies forestales mediterráneas más importantes. Constituye gran parte del estrato arbóreo de dehesas o montados, produce bellota como alimento del ganado y establece simbiosis con hongos micorrizógenos de gran valor económico. La encina está considerada como una especie recalcitrante en términos de conservación de semillas y capacidad morfogénica, lo que dificulta los programas de conservación de recursos genéticos y la mejora de la especie. La propagación vegetativa es una potente herramienta de los programas de mejora, por lo que es preciso desarrollar protocolos de regeneración somática en encina. La embriogénesis somática está considerada como la modalidad más adecuada de regeneración basada en técnicas de cultivo de tejidos vegetales utilizada en biotecnología forestal. Este trabajo se centra en el estudio de determinados aspectos de la embriogénesis somática para la regeneración clonal de encinas adultas. La memoria de esta tesis se ha dividido en capítulos que se corresponden con diferentes aspectos del sistema embriogénico. La embriogénesis somática se indujo en tegumentos maternos de óvulos en desarrollo procedentes de bellotas inmaduras de encinas adultas. A pesar de las bajas frecuencias de inducción, las líneas embriogénicas generadas se amplificaron mediante embriogénesis secundaria observándose cierta pérdida de la capacidad de diferenciación con el tiempo. Tanto el genotipo como la formulación del medio de cultivo influyeron en la respuesta embriogénica, concluyendo que la formulación de macronutrientes de Schenk y Hildebrant del medio sin reguladores de crecimiento fue la combinación más efectiva en la inducción. Los resultados sugirieron la existencia de una ventana en el desarrollo del óvulo más sensible a la inducción. El genotipo in[luyó en la capacidad proliferativa de los cultivos y en la conversión de los embriones somáticos, que se incrementó suplementando el medio con ácido indol-3-butírico y 6-benciladenina. El cultivo en medio líquido de líneas embriogénicas en condiciones de inmersión transitoria incrementó el crecimiento, dependiendo del genotipo, con respecto al cultivo en medio semisólido. Sin embargo, no mejoró la capacidad de diferenciar embriones cotiledonares aislados. Se estableció un protocolo de inicio y mantenimiento de cultivos en suspensión para varias líneas embriogénicas mediante inoculación en alta densidad de agregados embrionarios procedentes del medio semisólido. Para evitar la pérdida de vigor y la capacidad morfogénica debida al cultivo prolongado se desarrolló un protocolo de crioconservación de líneas embriogénicas mediante vitrificación. Al determinar la influencia de los agentes crioprotectores antes y después de su inmersión en nitrógeno líquido se concluyó que las respuestas de capacidad de crecimiento y de diferenciación del material embriogénico son independientes, además de estar bajo influencia del genotipo y el tipo de material crioconservado. La combinación de sacarosa y PVS2 previa a la inmersión en nitrógeno líquido proporcionó la mayor tasa de recuperación. Cuando las líneas fueron crioconservadas 30 días la capacidad de diferenciación se perdió en todas ellas. El análisis de SSR detectó variación somaclonal en el material crioconservado a corto plazo. SSR y RAPD mostraron importantes diferencias genéticas entre los árboles donantes y el material embriogénico que dependieron del genotipo. El grado de detección dependió del marcador empleado. Ambos marcadores revelaron baja inestabilidad intraclonal. Los RAPD revelaron variación genética intra-individuo en las encinas donantes. Se discuten la variación genética pre-existente en encina, su aparición durante las primeras fases de la inducción de embriogénesis, y la presencia de tejidos provenientes de la fertilización en el explanto materno. Esto hace preciso definir la identidad genética del material donante y acometer ensayos de detección precoz de variación somaclonal. ABSTRACT Holm oak (Quercus ilex L.) is one of the most important Mediterranean forest species. It conforms the tree layer of dehesas or montados, it produces acorns to feed the livestock and it establishes symbiosis with profitable mycorrhizal fungi. Holm oak is considered as recalcitrant species in terms of seed conservation and morphogenic capacities, which complicates the development of genetic conservation and improvement programs. Vegetative propagation is one of the mightiest tools for breeding programs therefore; developing protocols for clonal regeneration of holm oak is essential. Somatic embryogenesis is considered the best tissue culture-based way of plant regeneration in forest biotechnology. The present study is focused on the study of certain aspects of somatic embryogenesis for clonal regeneration of mature holm oak. This thesis manuscript is divided into several chapters that match with different aspects of the embryogenic system. Somatic embryogenesis induction was achieved on maternal teguments of developing ovules from immature acorns of adult holm oak trees. Despite the low induction frequencies, the generated embryogenic lines were amplified by secondary embryogenesis. A decline in the differentiation capacity over time was also observed. It was concluded that both genotype and culture media formulation influenced the embryogenic response, being the Schenk and Hildebrandt´s macronutrients formulation from culture medium and the lack of plant growth regulators the most effective combination for the induction of the embryogenic response. It has been suggested the existence of a developmental window in which ovules are prone to induction. Genotype influenced the proliferation capacity and the plant conversion of somatic embryos, which was also favoured by the presence of indol-3-butyric acid and 6-bencyladenine. The use of temporary immersion systems as proliferation in liquid culture of the embryogenic lines increased the growth depending on genotype, when compared to semisolid cultures. However, it did not improve the differentiation of single cotyledonary embryos. A protocol for the initiation and maintenance of embryogenic suspension cultures was established for several embryogenic lines with highly dense inoculi of embryogenic clusters from proliferating semisolid cultures. In order to avoid the loss of vigour and morphogenic ability of embryogenic lines due to prolonged cultures, a cryopreservation protocol for embryogenic lines of holm oak has been developed. During the determination of the influence of cryoprotective agents on the growth and differentiation capacities before and after liquid nitrogen immersion, it was concluded that both responses were independent from each other and also under the influence of genotype and the type of cryopreserved material. The combination of sucrose and PVS2 prior liquid nitrogen immersion provided higher recovery rates. When the same embryogenic lines were cryopreserved for 30 days, none was able to differentiate. The SSRs analysis of the short-term cryopreserved material detected somaclonal variation. Both SSR and RAPD markers showed high sensitivity to detect genetic differences between the donor trees and the generated embryogenic material. Nevertheless, the degree of instability detection depended on the marker. The SSR analysis indicated a relationship between genotype, the studied loci and the located polymorphisms. Also, both markers revealed low intraclonal genetic variation. The RAPD detected genetic variation within the donor trees. The presence of pre-existent genetic variation within mature trees, in addition to its occurrence during the early stages of the embryogenic induction, and the presence of tissues of fertilisation origin within the maternal explants are all discussed. Nonetheless, the determination of the genetic identity of donor material is required, in addition to early detection methods of somaclonal variation.

Development of somatic embryogenesis for cloning and conservation of mature holm oak trees (Quercus ilex L.)

La encina (Quercus ilex L.) es una de las especies forestales mediterráneas más importantes. Constituye gran parte del estrato arbóreo de dehesas o montados, produce bellota como alimento del ganado y establece simbiosis con hongos micorrizógenos de gran valor económico. La encina está considerada como una especie recalcitrante en términos de conservación de semillas y capacidad morfogénica, lo que dificulta los programas de conservación de recursos genéticos y la mejora de la especie. La propagación vegetativa es una potente herramienta de los programas de mejora, por lo que es preciso desarrollar protocolos de regeneración somática en encina. La embriogénesis somática está considerada como la modalidad más adecuada de regeneración basada en técnicas de cultivo de tejidos vegetales utilizada en biotecnología forestal. Este trabajo se centra en el estudio de determinados aspectos de la embriogénesis somática para la regeneración clonal de encinas adultas. La memoria de esta tesis se ha dividido en capítulos que se corresponden con diferentes aspectos del sistema embriogénico. La embriogénesis somática se indujo en tegumentos maternos de óvulos en desarrollo procedentes de bellotas inmaduras de encinas adultas. A pesar de las bajas frecuencias de inducción, las líneas embriogénicas generadas se amplificaron mediante embriogénesis secundaria observándose cierta pérdida de la capacidad de diferenciación con el tiempo. Tanto el genotipo como la formulación del medio de cultivo influyeron en la respuesta embriogénica, concluyendo que la formulación de macronutrientes de Schenk y Hildebrant del medio sin reguladores de crecimiento fue la combinación más efectiva en la inducción. Los resultados sugirieron la existencia de una ventana en el desarrollo del óvulo más sensible a la inducción. El genotipo in[luyó en la capacidad proliferativa de los cultivos y en la conversión de los embriones somáticos, que se incrementó suplementando el medio con ácido indol-3-butírico y 6-benciladenina. El cultivo en medio líquido de líneas embriogénicas en condiciones de inmersión transitoria incrementó el crecimiento, dependiendo del genotipo, con respecto al cultivo en medio semisólido. Sin embargo, no mejoró la capacidad de diferenciar embriones cotiledonares aislados. Se estableció un protocolo de inicio y mantenimiento de cultivos en suspensión para varias líneas embriogénicas mediante inoculación en alta densidad de agregados embrionarios procedentes del medio semisólido. Para evitar la pérdida de vigor y la capacidad morfogénica debida al cultivo prolongado se desarrolló un protocolo de crioconservación de líneas embriogénicas mediante vitrificación. Al determinar la influencia de los agentes crioprotectores antes y después de su inmersión en nitrógeno líquido se concluyó que las respuestas de capacidad de crecimiento y de diferenciación del material embriogénico son independientes, además de estar bajo influencia del genotipo y el tipo de material crioconservado. La combinación de sacarosa y PVS2 previa a la inmersión en nitrógeno líquido proporcionó la mayor tasa de recuperación. Cuando las líneas fueron crioconservadas 30 días la capacidad de diferenciación se perdió en todas ellas. El análisis de SSR detectó variación somaclonal en el material crioconservado a corto plazo. SSR y RAPD mostraron importantes diferencias genéticas entre los árboles donantes y el material embriogénico que dependieron del genotipo. El grado de detección dependió del marcador empleado. Ambos marcadores revelaron baja inestabilidad intraclonal. Los RAPD revelaron variación genética intra-individuo en las encinas donantes. Se discuten la variación genética pre-existente en encina, su aparición durante las primeras fases de la inducción de embriogénesis, y la presencia de tejidos provenientes de la fertilización en el explanto materno. Esto hace preciso definir la identidad genética del material donante y acometer ensayos de detección precoz de variación somaclonal. ABSTRACT Holm oak (Quercus ilex L.) is one of the most important Mediterranean forest species. It conforms the tree layer of dehesas or montados, it produces acorns to feed the livestock and it establishes symbiosis with profitable mycorrhizal fungi. Holm oak is considered as recalcitrant species in terms of seed conservation and morphogenic capacities, which complicates the development of genetic conservation and improvement programs. Vegetative propagation is one of the mightiest tools for breeding programs therefore; developing protocols for clonal regeneration of holm oak is essential. Somatic embryogenesis is considered the best tissue culture-based way of plant regeneration in forest biotechnology. The present study is focused on the study of certain aspects of somatic embryogenesis for clonal regeneration of mature holm oak. This thesis manuscript is divided into several chapters that match with different aspects of the embryogenic system. Somatic embryogenesis induction was achieved on maternal teguments of developing ovules from immature acorns of adult holm oak trees. Despite the low induction frequencies, the generated embryogenic lines were amplified by secondary embryogenesis. A decline in the differentiation capacity over time was also observed. It was concluded that both genotype and culture media formulation influenced the embryogenic response, being the Schenk and Hildebrandt´s macronutrients formulation from culture medium and the lack of plant growth regulators the most effective combination for the induction of the embryogenic response. It has been suggested the existence of a developmental window in which ovules are prone to induction. Genotype influenced the proliferation capacity and the plant conversion of somatic embryos, which was also favoured by the presence of indol-3-butyric acid and 6-bencyladenine. The use of temporary immersion systems as proliferation in liquid culture of the embryogenic lines increased the growth depending on genotype, when compared to semisolid cultures. However, it did not improve the differentiation of single cotyledonary embryos. A protocol for the initiation and maintenance of embryogenic suspension cultures was established for several embryogenic lines with highly dense inoculi of embryogenic clusters from proliferating semisolid cultures. In order to avoid the loss of vigour and morphogenic ability of embryogenic lines due to prolonged cultures, a cryopreservation protocol for embryogenic lines of holm oak has been developed. During the determination of the influence of cryoprotective agents on the growth and differentiation capacities before and after liquid nitrogen immersion, it was concluded that both responses were independent from each other and also under the influence of genotype and the type of cryopreserved material. The combination of sucrose and PVS2 prior liquid nitrogen immersion provided higher recovery rates. When the same embryogenic lines were cryopreserved for 30 days, none was able to differentiate. The SSRs analysis of the short-term cryopreserved material detected somaclonal variation. Both SSR and RAPD markers showed high sensitivity to detect genetic differences between the donor trees and the generated embryogenic material. Nevertheless, the degree of instability detection depended on the marker. The SSR analysis indicated a relationship between genotype, the studied loci and the located polymorphisms. Also, both markers revealed low intraclonal genetic variation. The RAPD detected genetic variation within the donor trees. The presence of pre-existent genetic variation within mature trees, in addition to its occurrence during the early stages of the embryogenic induction, and the presence of tissues of fertilisation origin within the maternal explants are all discussed. Nonetheless, the determination of the genetic identity of donor material is required, in addition to early detection methods of somaclonal variation.