Viscoelastic vibration damping identification methods. Application to laminated glass.

Laminatedglass is composed of two glass layers and a thin intermediate PVB layer, strongly influencing PVB's viscoelastic behaviour its dynamic response. While natural frequencies are relatively easily identified even with simplified FE models, damping ratios are not identified with such an ease. In order to determine to what extent external factors influence dampingidentification, different tests have been carried out. The external factors considered, apart from temperature, are accelerometers, connection cables and the effect of the glass layers. To analyse the influence of the accelerometers and their connection cables a laser measuring device was employed considering three possibilities: sample without instrumentation, sample with the accelerometers fixed and sample completely instrumented. When the sample is completely instrumented, accelerometer readings are also analysed. To take into consideration the effect of the glass layers, tests were realised both for laminatedglass and monolithic samples. This paper presents in depth data analysis of the different configurations and establishes criteria for data acquisition when testing laminatedglass.

Five-year results of a slant-path propagation experiment at 20 GHz in Madrid

Satellite operators are starting to use the Ka-band (30/20 GHz) for communications systems requiring higher traffic capacity. The use of this band is expected to experience a significant growth in the next few years, as several operators have reported plans to launch new satellites with Ka-band capacity. It is worth mentioning the Ka-Sat satellite in Europe, launched in 2010, and ViaSat-1, of 2011, with coverage of USA1. Some other examples can be found in other parts of the World. Recent satellite communications standards, such as DVB-S22 or DVB-RCS3, which provide means to mitigate propagation impairments, have been developed with the objective of improving the use of the Ka-band, in comparison with previous technical standards. In the next years, the ALPHASAT satellite will bring about new opportunities4 for carrying out propagation and telecommunication experiments in the Ka- and Q/V-bands. Commercial uses are focused on the provision of high speed data communications, for Internet access and other applications. In the near future, it is expected that higher and higher data rates will also be needed to broadcast richer multimedia contents, including HD-TV, interactive content or 3D-TV. All of these services may be provided in the future by satellites of the current generation, whose life span can extend up to 2025 in some cases. Depending on local regulations, the available bandwidth for the satellite fixed and broadcasting services in the Ka-band is in excess of several hundred MHz, bidirectional, comprising more than 1 GHz for each sub-band in some cases. In this paper, the results of a propagation experiment that is being carried out at Universidad Politécnica de Madrid (UPM), Spain, are presented5. The objective of the experiment is twofold: gathering experimental time series of attenuation and analyzing them in order to characterize the propagation channel at these frequencies6. The experiment and statistical results correspond to five complete years of measurements. The experiment is described in more detail in Section II. Yearly characteristics of rain attenuation are presented in Section III, whereas Section IV is dedicated to the monthly, seasonal, and hourly characteristics. Section V covers the dynamic characteristics of this propagation effect, just before the conclusions are described in Section VI.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Methods and Techniques for the Generation and Eficient Exploitation of RDB2RDF Mappings

RDB to RDF Mapping Language (R2RML) es una recomendación del W3C que permite especificar reglas para transformar bases de datos relacionales a RDF. Estos datos en RDF se pueden materializar y almacenar en un sistema gestor de tripletas RDF (normalmente conocidos con el nombre triple store), en el cual se pueden evaluar consultas SPARQL. Sin embargo, hay casos en los cuales la materialización no es adecuada o posible, por ejemplo, cuando la base de datos se actualiza frecuentemente. En estos casos, lo mejor es considerar los datos en RDF como datos virtuales, de tal manera que las consultas SPARQL anteriormente mencionadas se traduzcan a consultas SQL que se pueden evaluar sobre los sistemas gestores de bases de datos relacionales (SGBD) originales. Para esta traducción se tienen en cuenta los mapeos R2RML. La primera parte de esta tesis se centra en la traducción de consultas. Se propone una formalización de la traducción de SPARQL a SQL utilizando mapeos R2RML. Además se proponen varias técnicas de optimización para generar consultas SQL que son más eficientes cuando son evaluadas en sistemas gestores de bases de datos relacionales. Este enfoque se evalúa mediante un benchmark sintético y varios casos reales. Otra recomendación relacionada con R2RML es la conocida como Direct Mapping (DM), que establece reglas fijas para la transformación de datos relacionales a RDF. A pesar de que ambas recomendaciones se publicaron al mismo tiempo, en septiembre de 2012, todavía no se ha realizado un estudio formal sobre la relación entre ellas. Por tanto, la segunda parte de esta tesis se centra en el estudio de la relación entre R2RML y DM. Se divide este estudio en dos partes: de R2RML a DM, y de DM a R2RML. En el primer caso, se estudia un fragmento de R2RML que tiene la misma expresividad que DM. En el segundo caso, se representan las reglas de DM como mapeos R2RML, y también se añade la semántica implícita (relaciones de subclase, 1-N y M-N) que se puede encontrar codificada en la base de datos. Esta tesis muestra que es posible usar R2RML en casos reales, sin necesidad de realizar materializaciones de los datos, puesto que las consultas SQL generadas son suficientemente eficientes cuando son evaluadas en el sistema gestor de base de datos relacional. Asimismo, esta tesis profundiza en el entendimiento de la relación existente entre las dos recomendaciones del W3C, algo que no había sido estudiado con anterioridad. ABSTRACT. RDB to RDF Mapping Language (R2RML) is a W3C recommendation that allows specifying rules for transforming relational databases into RDF. This RDF data can be materialized and stored in a triple store, so that SPARQL queries can be evaluated by the triple store. However, there are several cases where materialization is not adequate or possible, for example, if the underlying relational database is updated frequently. In those cases, RDF data is better kept virtual, and hence SPARQL queries over it have to be translated into SQL queries to the underlying relational database system considering that the translation process has to take into account the specified R2RML mappings. The first part of this thesis focuses on query translation. We discuss the formalization of the translation from SPARQL to SQL queries that takes into account R2RML mappings. Furthermore, we propose several optimization techniques so that the translation procedure generates SQL queries that can be evaluated more efficiently over the underlying databases. We evaluate our approach using a synthetic benchmark and several real cases, and show positive results that we obtained. Direct Mapping (DM) is another W3C recommendation for the generation of RDF data from relational databases. While R2RML allows users to specify their own transformation rules, DM establishes fixed transformation rules. Although both recommendations were published at the same time, September 2012, there has not been any study regarding the relationship between them. The second part of this thesis focuses on the study of the relationship between R2RML and DM. We divide this study into two directions: from R2RML to DM, and from DM to R2RML. From R2RML to DM, we study a fragment of R2RML having the same expressive power than DM. From DM to R2RML, we represent DM transformation rules as R2RML mappings, and also add the implicit semantics encoded in databases, such as subclass, 1-N and N-N relationships. This thesis shows that by formalizing and optimizing R2RML-based SPARQL to SQL query translation, it is possible to use R2RML engines in real cases as the resulting SQL is efficient enough to be evaluated by the underlying relational databases. In addition to that, this thesis facilitates the understanding of bidirectional relationship between the two W3C recommendations, something that had not been studied before.