Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Interactive Graphic Simulation: An Advanced Methodology to Improve the Teaching-Learning Process in Nuclear Engineering Education and Training

Nowadays, computer simulators are becoming basic tools for education and training in many engineering fields. In the nuclear industry, the role of simulation for training of operators of nuclear power plants is also recognized of the utmost relevance. As an example, the International Atomic Energy Agency sponsors the development of nuclear reactor simulators for education, and arranges the supply of such simulation programs. Aware of this, in 2008 Gas Natural Fenosa, a Spanish gas and electric utility that owns and operate nuclear power plants and promotes university education in the nuclear technology field, provided the Department of Nuclear Engineering of Universidad Politécnica de Madrid with the Interactive Graphic Simulator (IGS) of “José Cabrera” (Zorita) nuclear power plant, an industrial facility whose commercial operation ceased definitively in April 2006. It is a state-of-the-art full-scope real-time simulator that was used for training and qualification of the operators of the plant control room, as well as to understand and analyses the plant dynamics, and to develop, qualify and validate its emergency operating procedures.

Analysis of the operator action and the single failure criteria in a SGTR sequence using best estimate assumptions with TRACE 5.0

Steam Generator Tube Rupture (SGTR) sequences in Pressurized Water Reactors are known to be one of the most demanding transients for the operating crew. SGTR are a special kind of transient as they could lead to radiological releases without core damage or containment failure, as they can constitute a direct path from the reactor coolant system to the environment. The first methodology used to perform the Deterministic Safety Analysis (DSA) of a SGTR did not credit the operator action for the first 30 min of the transient, assuming that the operating crew was able to stop the primary to secondary leakage within that period of time. However, the different real SGTR accident cases happened in the USA and over the world demonstrated that the operators usually take more than 30 min to stop the leakage in actual sequences. Some methodologies were raised to overcome that fact, considering operator actions from the beginning of the transient, as it is done in Probabilistic Safety Analysis. This paper presents the results of comparing different assumptions regarding the single failure criteria and the operator action taken from the most common methodologies included in the different Deterministic Safety Analysis. One single failure criteria that has not been analysed previously in the literature is proposed and analysed in this paper too. The comparison is done with a PWR Westinghouse three loop model in TRACE code (Almaraz NPP) with best estimate assumptions but including deterministic hypothesis such as single failure criteria or loss of offsite power. The behaviour of the reactor is quite diverse depending on the different assumptions made regarding the operator actions. On the other hand, although there are high conservatisms included in the hypothesis, as the single failure criteria, all the results are quite far from the regulatory limits. In addition, some improvements to the Emergency Operating Procedures to minimize the offsite release from the damaged SG in case of a SGTR are outlined taking into account the offsite dose sensitivity results.

Efficient algorithms for dynamic probabilistic safety assessment. An application to convex damage domain.

The design of nuclear power plant has to follow a number of regulations aimed at limiting the risks inherent in this type of installation. The goal is to prevent and to limit the consequences of any possible incident that might threaten the public or the environment. To verify that the safety requirements are met a safety assessment process is followed. Safety analysis is as key component of a safety assessment, which incorporates both probabilistic and deterministic approaches. The deterministic approach attempts to ensure that the various situations, and in particular accidents, that are considered to be plausible, have been taken into account, and that the monitoring systems and engineered safety and safeguard systems will be capable of ensuring the safety goals. On the other hand, probabilistic safety analysis tries to demonstrate that the safety requirements are met for potential accidents both within and beyond the design basis, thus identifying vulnerabilities not necessarily accessible through deterministic safety analysis alone. Probabilistic safety assessment (PSA) methodology is widely used in the nuclear industry and is especially effective in comprehensive assessment of the measures needed to prevent accidents with small probability but severe consequences. Still, the trend towards a risk informed regulation (RIR) demanded a more extended use of risk assessment techniques with a significant need to further extend PSA’s scope and quality. Here is where the theory of stimulated dynamics (TSD) intervenes, as it is the mathematical foundation of the integrated safety assessment (ISA) methodology developed by the CSN(Consejo de Seguridad Nuclear) branch of Modelling and Simulation (MOSI). Such methodology attempts to extend classical PSA including accident dynamic analysis, an assessment of the damage associated to the transients and a computation of the damage frequency. The application of this ISA methodology requires a computational framework called SCAIS (Simulation Code System for Integrated Safety Assessment). SCAIS provides accident dynamic analysis support through simulation of nuclear accident sequences and operating procedures. Furthermore, it includes probabilistic quantification of fault trees and sequences; and integration and statistic treatment of risk metrics. SCAIS comprehensively implies an intensive use of code coupling techniques to join typical thermal hydraulic analysis, severe accident and probability calculation codes. The integration of accident simulation in the risk assessment process and thus requiring the use of complex nuclear plant models is what makes it so powerful, yet at the cost of an enormous increase in complexity. As the complexity of the process is primarily focused on such accident simulation codes, the question of whether it is possible to reduce the number of required simulation arises, which will be the focus of the present work. This document presents the work done on the investigation of more efficient techniques applied to the process of risk assessment inside the mentioned ISA methodology. Therefore such techniques will have the primary goal of decreasing the number of simulation needed for an adequate estimation of the damage probability. As the methodology and tools are relatively recent, there is not much work done inside this line of investigation, making it a quite difficult but necessary task, and because of time limitations the scope of the work had to be reduced. Therefore, some assumptions were made to work in simplified scenarios best suited for an initial approximation to the problem. The following section tries to explain in detail the process followed to design and test the developed techniques. Then, the next section introduces the general concepts and formulae of the TSD theory which are at the core of the risk assessment process. Afterwards a description of the simulation framework requirements and design is given. Followed by an introduction to the developed techniques, giving full detail of its mathematical background and its procedures. Later, the test case used is described and result from the application of the techniques is shown. Finally the conclusions are presented and future lines of work are exposed.

Analysis of the geometric altimetry to support aircraft optimal trajectories within the future 4d trajectory management

Over the past few years, the common practice within air traffic management has been that commercial aircraft fly by following a set of predefined routes to reach their destination. Currently, aircraft operators are requesting more flexibility to fly according to their prefer- ences, in order to achieve their business objectives. Due to this reason, much research effort is being invested in developing different techniques which evaluate aircraft optimal trajectory and traffic synchronisation. Also, the inefficient use of the airspace using barometric altitude overall in the landing and takeoff phases or in Continuous Descent Approach (CDA) trajectories where currently it is necessary introduce the necessary reference setting (QNH or QFE). To solve this problem and to permit a better airspace management born the interest of this research. Where the main goals will be to evaluate the impact, weakness and strength of the use of geometrical altitude instead of the use of barometric altitude. Moreover, this dissertation propose the design a simplified trajectory simulator which is able to predict aircraft trajectories. The model is based on a three degrees of freedom aircraft point mass model that can adapt aircraft performance data from Base of Aircraft Data, and meteorological information. A feature of this trajectory simulator is to support the improvement of the strategic and pre-tactical trajectory planning in the future Air Traffic Management. To this end, the error of the tool (aircraft Trajectory Simulator) is measured by comparing its performance variables with actual flown trajectories obtained from Flight Data Recorder information. The trajectory simulator is validated by analysing the performance of different type of aircraft and considering different routes. A fuel consumption estimation error was identified and a correction is proposed for each type of aircraft model. In the future Air Traffic Management (ATM) system, the trajectory becomes the fundamental element of a new set of operating procedures collectively referred to as Trajectory-Based Operations (TBO). Thus, governmental institutions, academia, and industry have shown a renewed interest for the application of trajectory optimisation techniques in com- mercial aviation. The trajectory optimisation problem can be solved using optimal control methods. In this research we present and discuss the existing methods for solving optimal control problems focusing on direct collocation, which has received recent attention by the scientific community. In particular, two families of collocation methods are analysed, i.e., Hermite-Legendre-Gauss-Lobatto collocation and the pseudospectral collocation. They are first compared based on a benchmark case study: the minimum fuel trajectory problem with fixed arrival time. For the sake of scalability to more realistic problems, the different meth- ods are also tested based on a real Airbus 319 El Cairo-Madrid flight. Results show that pseudospectral collocation, which has shown to be numerically more accurate and computa- tionally much faster, is suitable for the type of problems arising in trajectory optimisation with application to ATM. Fast and accurate optimal trajectory can contribute properly to achieve the new challenges of the future ATM. As atmosphere uncertainties are one of the most important issues in the trajectory plan- ning, the final objective of this dissertation is to have a magnitude order of how different is the fuel consumption under different atmosphere condition. Is important to note that in the strategic phase planning the optimal trajectories are determined by meteorological predictions which differ from the moment of the flight. The optimal trajectories have shown savings of at least 500 [kg] in the majority of the atmosphere condition (different pressure, and temperature at Mean Sea Level, and different lapse rate temperature) with respect to the conventional procedure simulated at the same atmosphere condition.This results show that the implementation of optimal profiles are beneficial under the current Air traffic Management (ATM).

Urban Archaeology in Madrid. Experiences and Opportunities to Understand Historical City

In 2015, it will be thirty years since Spanish Historic Heritage Law from 1985 was approved. The results after three decades under this law are necessarily positive and witness how the complex autonomous regional legislation has been promoted, guided and organized in this Heritage field. In addition, the law enforcement has brought into the scene how the numerous public and private initiatives involved in caring, managing, protecting and restoring our cultural heritage have been channeled and regulated, as well as monitoring the impact these initiatives produce on urban archaeology. During this long period of Spanish recent history, cultural heritage -understood as an important development tool, especially when related to cultural tourism- has succeeded in channeling resources for developing the historical research projects, both documental and archaeological, that the Spanish monumental urban ensembles were requiring. In this context, the case of the city of Madrid is a clear example of the significant development that urban Historical Archaeology has experienced in Spain over the last thirty years, especially when dealing with the study of the Middle Ages (8th to 15th centuries) and the Modern Age (16th to 18th centuries). Given the number of interventions and the important results obtained by many of them, Madrid urban archaeology is an extraordinary example of the consequences of implementing new management models, changing criteria and operating procedures, and also, of course, of the conflicts and debates raised regarding heritage, as well as the importance these interventions have implied, which is the main aim of this work.

Bankable procedures for the technical quality assurance of large scale PV plants

Strict technical quality assurance procedures are essential for PV plant bankability. When large-scale PV plants are concerned, this is typically accomplished in three consecutive phases: an energy yield forecast, that is performed at the beginning of the project and is typically accomplished by means of a simulation exercise performed with dedicated software; a reception test campaign, that is performed at the end of the commissioning and consists of a set of tests for determining the efficiency and the reliability of the PV plant devices; and a performance analysis of the first years of operation, that consists in comparing the real energy production with the one calculated from the recorded operating conditions and taking into account the maintenance records. In the last six years, IES-UPM has offered both indoor and on-site quality control campaigns for more than 60 PV plants, with an accumulated power of more than 300 MW, in close contact with Engineering, Procurement and Construction Contractors and financial entities. This paper presents the lessons learned from such experience.

Equipment and procedures for ON-SITE testing of PV plants and BIPV

Actual system performance of a PV system can differ from its expected behaviour.. This is the main reason why the performance of PV systems should be monitored, analyzed and, if needed, improved on. Some of the current testing procedures relating to the electrical behaviour of PV systems are appropriated for detecting electrical performance losses, but they are not well-suited to reveal hidden defects in the modules of PV plants and BIPV, which can lead to future losses. This paper reports on the tests and procedures used to evaluate the performance of PV systems, and especially on a novel procedure for quick on-site measurements and defect recognition caused by overheating in PV modules located in operating PV installations.

Emergency management in the highways of the future. A performance-based multilayered ITS architecture design proposal

Emergency management is one of the key aspects within the day-to-day operation procedures in a highway. Efficiency in the overall response in case of an incident is paramount in reducing the consequences of any incident. However, the approach of highway operators to the issue of incident management is still usually far from a systematic, standardized way. This paper attempts to address the issue and provide several hints on why this happens, and a proposal on how the situation could be overcome. An introduction to a performance based approach to a general system specification will be described, and then applied to a particular road emergency management task. A real testbed has been implemented to show the validity of the proposed approach. Ad-hoc sensors (one camera and one laser scanner) were efficiently deployed to acquire data, and advanced fusion techniques applied at the processing stage to reach the specific user requirements in terms of functionality, flexibility and accuracy.

Estudio de los parámetros necesarios para establecer las medidas de actuación por tipos de buques en situaciones de emergencia después de un accidente

La “Actuación en la Crisis”, objetivo principal de esta tesis, trata de establecer y concretar los procedimientos y apoyos desde tierra y a bordo de los buques, tanto técnicos como operacionales, a seguir por el Capitán y tripulación de un buque después de un accidente, en especial cuando el buque tiene un riesgo importante de hundimiento o necesidad de abandono. La aparición de este concepto es relativamente reciente, es decir desde el año 1995, después de los estudios y propuestas realizados, por el Panel de Expertos de IMO, como consecuencia del hundimiento del buque de pasaje y carga rodada, Estonia, en el que perdieron la vida más de 850 personas a finales de Septiembre de 1994. Entre las propuestas recomendadas y aceptadas por los gobiernos en la Conferencia Internacional SOLAS 1995, figuraba este concepto novedoso, que luego fue adoptado de una forma generalizada para todos los tipos de buques, que hasta entonces sólo disponían de documentos dispersos y a veces contradictorios para la actuación en estos momentos de peligro, que dio lugar a un profundo tratamiento de este problema, que iba a afectar a los buques, tanto en los conceptos y parámetros de proyecto, como a la propia operación del buque. La tesis desarrolla los fundamentos, estado del arte, implantación y consecuencias sobre la configuración y explotación del buque, que han dado lugar a una serie de documentos, que se han incluido en diversos Convenios Internacionales, Códigos y otros documentos de obligada aplicación en la industria naval generados en IMO (SOLAS, Retorno Seguro a Puerto, Plano y Libro de Control de Averías, ISM). La consecuencia más novedosa e interesante de este concepto ha sido la necesidad de disponer cada compañía explotadora del buque, de un servicio importante de “apoyo en la crisis”, que ha dado lugar a implantar un “servicio de emergencia especial”, disponible las 24 horas del día y 365 de año que ofrecen las Sociedades de Clasificación. El know-how de los accidentes que tratan estos servicios, hacen que se puedan establecer ciertas recomendaciones, que se centran, en que el buque tenga, por sus propios medios, una posibilidad de aumentar el KM después de una avería, la garantía de la resistencia estructural adecuada y el aumento del tiempo de hundimiento o el tiempo de mantenimiento a flote (otro tipo de averías vinculadas con la maquinaria, equipo o protección y lucha contra incendios, no son objeto de tesis). Las conclusiones obtenidas, son objeto de discusión especialmente en IACS e IMO, con el fin de establecer las aplicaciones pertinentes, que permitan dar al buque una mayor seguridad. Como objetivo principal de esta tesis es establecer estos puntos de mejora consecuencia de esta actuación en la crisis, con la aportación de varias soluciones que mejorarían los problemas mencionados para los tres tipos de buques que consideramos más importantes (pasaje, petroleros y bulkcarriers) La tesis recorre, desde el principio en 1995, la evolución de esta actuación en la crisis, hasta el momento actual., los puntos básicos que se establecen, que van muy de la mano de la llamada “cultura de seguridad”, objetivo nacido durante los años 90, con el fin de implantar una filosofía distinta para abordar el tratamiento de la seguridad del buque, a la que se venía aplicando hasta el momento, en donde se contemplaba tratar el tema de forma singular y específica para cada caso. La nueva filosofía, trataba de analizar el problema, desde un aspecto global y por tanto horizontal, realizando un estudio exhaustivo de las consecuencias que tendría la aplicación de una nueva medida correctora, en los restantes equipos y sistemas del buque., relativos al proyecto, configuración, operación y explotación del buque. Se describen de manera sucinta las profundas investigaciones a que dio lugar todo lo anterior, estando muchas de ellas, vinculadas a grandes proyectos europeos. La mayor parte de estos proyectos fueron subvencionados por la Comunidad Económica Europea durante la primera década del siglo actual. Dentro de estas investigaciones, donde hay que destacar la participación de todos los agentes del sector marítimo europeo, se hacen imprescindibles la utilización de dos herramientas novedosas para nuestro sector, como son el “Estudio de Riesgos” y la “Evaluación de la Seguridad”, más conocida técnicamente por su nombre ingles “Safety Assessment”, cuyos principios también son incluidos en la tesis. Además se especifican las bases sobre las que se establecen la estabilidad intacta y en averías, con nuevos conceptos, no tratados nunca hasta entonces, como la “altura crítica de agua en cubierta” para la cual el buque se hundiría sin remisión, “estado de la mar” en la que se puede encontrar el buque averiado, el cálculo del tiempo de hundimiento, u otros aspectos como el corrimiento de la carga, o bien el tratamiento de los problemas dinámicos en el nuevo “Código de Estabilidad Intacta”. Con respecto a la resistencia estructural, especialmente el estudio de la “resistencia estructural después de la avería”, que tiene en cuenta el estado de la mar en la que se encontraría el buque afectado. Se analizan los tipos de buques mencionados uno por uno y se sacan, como aportación fundamental de esta tesis, separadamente, las acciones y propuestas a aplicar a estos buques. En primer lugar, las relativas al proyecto y configuración del buque y en segundo lugar, las de operación, explotación y mantenimiento, con el fin de acometer, con garantías de éxito, la respuesta a la ayuda en emergencia y la solución a la difícil situación que pueden tener lugar en condiciones extremas. Para ver el efecto de algunas de las propuestas que se incluyen, se realizan y aplican concretamente, a un buque de pasaje de carga rodada, a un petrolero y a un bulkcarrier, para demostrar el mejor comportamiento de estos buques en situación de emergencia. Para ello se han elegido un buque ejemplo para cada tipo, efectuándose los cálculos de estabilidad y resistencia longitudinal y comparar la situación, en la que quedaría el buque averiado, antes y después de la avería. La tesis se completa con una estadística real de buques averiados de cada uno de estos tres tipos, distinguiendo el tipo de incidente y el número de los buques que lo han sufrido, considerándose como más importantes los incidentes relacionados con varadas, colisiones y fuego resumiéndose lo más relevante de esta aportación también importante de esta tesis. ABSTRACT The "Response in an emergency" is the main objective of this thesis, it seeks to establish and define procedures for technical and operational support onboard and shore, to be followed by the captain and crew on of a ship after an accident, especially when the ship has a significant risk of sinking or a need to abandon it. The emergence of this concept is relatively recent, in 1995, after studies and proposals made by the Panel of Experts IMO, following the sinking of the “Estonia” vessel, where more than 850 people died in late September 1994. In the International Convention SOLAS 1995, among the recommended proposals and accepted regulations, this new concept was included, which was later adopted for all types of ships which until then had only scattered some documents, sometimes including contradictory actions in emergency situations. This led to a profound treatment of this problem, which would affect the vessels in both the concepts and design parameters, as to the proper operation of the vessel. The thesis develops the foundations, state of the art, implementation and consequences on the design and operation of the vessel, this has led to a series of Circulars and Regulations included in several International Codes and Conventions issued by IMO which are required to be complied with (SOLAS Safe Return to Port, Damage Control Plan and Booklet, ISM). The most novel and interesting consequence of this concept has been the need for every company operating the ship to have a shore based support service in emergency situations which has led to implement special emergency services offered by Class Societies which are available 24 hours a day, 365 days per year. The know-how of these services dealing with all types of accidents can establish certain recommendations, which focus on the ship capability to increase the KM after damage. It can also be determined adequate structural strength and the increase of the capsizing time or time afloat (other types of damages associated with the machinery, equipment or firefighting, are not the subject of this thesis). The conclusions are discussed especially in IACS and IMO, in order to establish appropriate applications to improve the security of the vessels. The main objective of this thesis is to establish actions to improve emergency actions, resulting from different responses in the crisis, with the contribution of several solutions that improve the problems mentioned for three types of ships that we consider most important (passenger vessels, tankers and bulk carriers) The thesis runs from the beginning in 1995 to date, the evolution of the response on the crisis. The basics established during the 90s with the "safety culture" in order to implement a different philosophy to address the treatment of the safety of the ship, which was being previously implemented, as something singular and specific to each case. The new philosophy tried to analyse the problem from a global perspective, doing an exhaustive study of the consequences of the implementation of the new regulation in the ship systems and equipment related to the design, configuration and operation of the vessel. Extensive investigations which led to the above are described, many of them being linked to major European projects. Most of these projects were funded by the European Union during the first decade of this century. Within these investigations, which it must be highlighted the participation of all players in the European maritime sector, a necessity to use two new tools for our industry, such as the "Risk Assessment" and "Safety Assessment" whose principles are also included in the thesis. The intact and damage stability principles are established including new concepts, never treated before, as the "critical height of water on deck" for which the ship would sink without remission, "sea state" where the damaged vessel can be found, calculation of capsizing time, or other aspects such cargo shifting or treatment of dynamic problems in the new Intact Stability Code in development. Regarding the structural strength, it has to be especially considered the study of the "residual strength after damage", which takes into account the state of the sea where the vessel damaged can be found. Ship types mentioned are analysed one by one, as a fundamental contribution of this thesis, different actions and proposals are established to apply to these types of vessels. First, those ones relating to the design and configuration of the vessel and also the ones related to the operation and maintenance in order to support successfully responses to emergency situations which may occur in extreme situations. Some of the proposals are applied specifically to a RoRo passenger ship, an oil tanker and a bulkcarrier, to demonstrate the improved performance of these vessels damaged. An example for each type vessel has been chosen, carrying out stability and longitudinal strength calculations comparing the situation of the ship before and after damage. The thesis is completed with incidents statics for each of these three types, distinguishing the type of incident and the number of ships having it. The most important incidents considered are the ones related to groundings, collisions and fire being this other relevant contribution of this thesis.