New selective earth faults only current directional method for isolated neutral systems

In order to achieve total selectivity at electrical distribution networks it is of great importance to analyze the defect currents at ungrounded power systems. This information will help to grant selectivity at electrical distribution networks ensuring that only the defect line or feeder is removed from service. In the present work a new selective and directional protection method for ungrounded power systems is evaluated. The new method measures only defect currents to detect earth faults and works with a directional criterion to determine the line under faulty conditions. The main contribution of this new technique is that it can detect earth faults in outgoing lines at any type of substation avoiding the possible mismatch of traditional directional earth fault relays. This detection technique is based on the comparison of the direction of a reference current to the direction of all earth fault capacitive currents at all the feeders connected to the same bus bars. This new method has been validated through computer simulations. The results for the different cases studied are remarkable, proving total validity and usefulness of the new method.

Rammed earth walls in Serón de Nágima castle (Soria, Spain): Constructive lecture

The Raya or frontier between the kingdoms of Castile and Aragón was fortified with a system of castles and walled-cities that were useful during the several conflicts that took place in the Late Medieval Age. The Serón de Nágima castle defended the communication road between the axis of the Jalón river valley, which flows into the Ebro, and Duero valley. Its uniqueness stems from the fact that it is one of the few fortifications in the area where rammed earth is the only building system used. In this paper, the castle building fundaments are exposed mainly focusing on the techniques and building processes developed from the interpretation of the legible constructive signs in its walls.

Las normativas de construcción con tierra en el mundo/The earth building normative documents in the world

La tierra ha sido utilizada como material de construcción desde hace siglos. No obstante, la normativa al respecto está muy dispersa, y en la mayoría de países desarrollados surgen numerosos problemas técnicos y legales para llevar a cabo una construcción con este material. Este artículo estudia el panorama normativo para las construcciones con tierra cruda a nivel internacional, analizando cincuenta y cinco normas y reglamentos de países repartidos por los cinco continentes, que representan el estado del arte de la normalización de la tierra cruda como material de construcción. Es un estudio referenciado sobre las normas y reglamentos vigentes desarrollados por los organismos nacionales de normalización o autoridades correspondientes. Se presentan las normativas y los organismos que las emiten, analizando la estructura y contenido de cada una. Se estudian y analizan los aspectos más relevantes, como la estabilización, selección de los suelos, requisitos de los productos y ensayos existentes, comparando las diferentes normativas. Este trabajo puede ser de gran utilidad para el desarrollo de futuras normas y como referencia para arquitectos e ingenieros que trabajen con tierra. For centuries, earth has been used as a construction material. Nevertheless, the normative in this matter is very scattered, and in the most developed countries, carrying out a construction with this material implies a variety of technical and legal problems. This article analyzes, in an international level, the normative panorama about constructions with earth, analyzing fifty five standards and regulations of countries all around the five continents; these represent the state of art that normalizes the earth as a construction material. It is a study indexed on the actual procedures and regulations developed by the national organisms of normalization or correspondent authorities. The standards and the organisms that produce them appear, analyzing the structure and the content of each one. We have studied and analyzed the most relevant aspects, such as stabilization, soil selections, the requisites of the products and the existent test, comparing the diverse normative. The knowledge from this study could be very useful for the development of future standards and as a reference for architects and engineers that work with earth.

Detection and Isolation of Simultaneous Additive and Parametric Faults in Nonlinear Stochastic Dynamical Systems

This paper presents a new fault detection and isolation scheme for dealing with simultaneous additive and parametric faults. The new design integrates a system for additive fault detection based on Castillo and Zufiria, 2009 and a new parametric fault detection and isolation scheme inspired in Munz and Zufiria, 2008 . It is shown that the so far existing schemes do not behave correctly when both additive and parametric faults occur simultaneously; to solve the problem a new integrated scheme is proposed. Computer simulation results are presented to confirm the theoretical studies.

Approximation to earth material from international normative

For centuries, earth has been used as a construction material. Nevertheless, the normative in this matter is very scattered, and the most developed countries, to carry out a construction with this material implies a variety of technical and legal problems. In this paper we review, in an international level, the normative panorama about earth constructions. It analyzes ninety one standards and regulations of countries all around the five continents. These standards represent the state of art that normalizes the earth as a construction material. In this research we analyze the international standards to earth construction, focusing on durability test (spray and drip erosion tests). It analyzes the differences between methods of test. Also we show all results about these tests in two types of compressed earth block.

Rammed earth walls in the late middle age castles in the actual province of Soria, Spain

This paper analyzed the building techniques based in the use of rammed earth in the Late Medieval fortifications in the province of Soria, Spain. The manorial castles of Serón de Nágima and Yanguas were built completely with rammed earth. However, these techinques are different. Through the study of the constructive signals, we can reconstruct the constructive process and made an hypothesis of the auxiliary scaffolding necessary for the construction. After, other four cases in which there is presence of rammed earth are described: Ágreda, Arcos de Jalón, Caracena and the tower of Martín González or castle of La Raya (the Border). Rammed earth is used in some secondary architectural elements and also as a filling of the masonry walls, but somtimes there are ancient rammed earth walls overlaid with stone masonry.

Earth Delivery of a Small NEO with an Ion Beam Shepherd

The possibility of capturing a small Near Earth Asteroid (NEA) and deliver it to the vicinity of the Earth has been recently explored by different authors. The key advantage would be to allow a cheap and quick access to the NEA for science, resource utilization and other purposes. Among the different challenges related to this operation stands the difficulty of robotically capturing the object, whose composition and dynamical state could be problematic. In order to simplify the capture operation we propose the use of a collimated ion beam ejected from a hovering spacecraft in order to maneuver the object without direct physical contact. The feasibility of a possible asteroid retrieval mission is evaluated.

Earth Architecture and Construction in the colonial archaeological site of Piura la Vieja, La Matanza (Piura, Perú)

Ponencia en el congreso internacional RESTAPIA 2012 que recoge los resultados de los trabajos de investigación realizados en el yacimiento arqueológico colonial de Piura la Vieja, La Matanza (Piura, Perú).

Effectiveness for Ddtecting faults within and outside the scope of testing techniques: an independent replication

The verification and validation activity plays a fundamental role in improving software quality. Determining which the most effective techniques for carrying out this activity are has been an aspiration of experimental software engineering researchers for years. This paper reports a controlled experiment evaluating the effectiveness of two unit testing techniques (the functional testing technique known as equivalence partitioning (EP) and the control-flow structural testing technique known as branch testing (BT)). This experiment is a literal replication of Juristo et al. (2013).Both experiments serve the purpose of determining whether the effectiveness of BT and EP varies depending on whether or not the faults are visible for the technique (InScope or OutScope, respectively). We have used the materials, design and procedures of the original experiment, but in order to adapt the experiment to the context we have: (1) reduced the number of studied techniques from 3 to 2; (2) assigned subjects to experimental groups by means of stratified randomization to balance the influence of programming experience; (3) localized the experimental materials and (4) adapted the training duration. We ran the replication at the Escuela Politécnica del Ejército Sede Latacunga (ESPEL) as part of a software verification & validation course. The experimental subjects were 23 master?s degree students. EP is more effective than BT at detecting InScope faults. The session/program andgroup variables are found to have significant effects. BT is more effective than EP at detecting OutScope faults. The session/program and group variables have no effect in this case. The results of the replication and the original experiment are similar with respect to testing techniques. There are some inconsistencies with respect to the group factor. They can be explained by small sample effects. The results for the session/program factor are inconsistent for InScope faults.We believe that these differences are due to a combination of the fatigue effect and a technique x program interaction. Although we were able to reproduce the main effects, the changes to the design of the original experiment make it impossible to identify the causes of the discrepancies for sure. We believe that further replications closely resembling the original experiment should be conducted to improve our understanding of the phenomena under study.

Analysis of bare-tether systems for deorbiting low-earth-orbit satellites

Performances, design criteria, and system mass of bare tethers for satellite deorbiting missions are analyzed. Orbital conditions and tether cross section define a tether length, such that 1) shorter tethers are electron collecting practically in their whole extension and 2) longer tethers collect practically the short-circuit current in a fixed segment length. Long tethers have a higher drag efficiency (defined as the drag force vs the tether mass) and are better adapted to adverse plasma densities. Dragging efficiency and mission-related costs are used to define design criteria for tether geometry. A comparative analysis with electric thrusters shows that bare tethers have much lower costs for low- and midinclination orbits and remain an attractive option up to 70 deg.

Integrating geographical information in the Linked Digital Earth

Many progresses have been made since the Digital Earth notion was envisioned thirteen years ago. However, the mechanism for integrating geographic information into the Digital Earth is still quite limited. In this context, we have developed a process to generate, integrate and publish geospatial Linked Data from several Spanish National data-sets. These data-sets are related to four Infrastructure for Spatial Information in the European Community (INSPIRE) themes, specifically with Administrative units, Hydrography, Statistical units, and Meteorology. Our main goal is to combine different sources (heterogeneous, multidisciplinary, multitemporal, multiresolution, and multilingual) using Linked Data principles. This goal allows the overcoming of current problems of information integration and driving geographical information toward the next decade scenario, that is, ?Linked Digital Earth.?

Diseño y ensayos en tierra de paneles solares para un satélite de órbita baja = Design and testing procedures of a Low Earth Orbit (LEO) satellite solar panels

Debido al reciente incremento de conflictos en el mundo árabe y dado el interés nacional de España en dicha zona, se propone en este proyecto un estudio inicial para el diseño y desarrollo de un microsatélite que ayude al gobierno de España a mantener esa zona bajo observación constante. En el presente trabajo se abarcan todos los subsistemas del satélite, haciéndose un estudio más detallado del subsistema de potencia

Diseño del sistema de potencia para un satélite de órbita baja(LEO) = Design of a Low Earth Orbit (LEO) satellite power subsystem

Este documento contiene el proceso de prediseño y cálculo de un satélite de observación terrestre mediante imágenes fotográficas. El principal objetivo del proyecto es el diseño detallado del subsistema de potencia del satélite y a validación de un modelo de funcionamiento del sistema de potencia de las placas solares que alimentan al mismo y mediante la herramienta Simulink. La primera parte consiste en un diseño breve de los subsistemas y parámetros más importantes del satélite tales como el Sistema de Control de Actitud, Sistema de Control Térmico y Sistema de Comunicaciones, además de la estructura del satélite, la órbita en la que se encontrará, el lanzador que se usará para situarlo en órbita y la cámara que llevara a bordo para la captación de imágenes. La segunda parte trata del diseño del subsistema de potencia de una manera más detallada y de su simulación mediante una herramienta diseñada en el programa MATLAB con la herramienta Simulink. Se pretende usar la herramienta para simular el comportamiento del subsistema de potencia de un satélite conocido que será el UPMSat-2.