Quality grading of cork stoppers based on porosity, density and elasticity.

An objective control method for grading cork stoppers is presented using a cork stopper quality index based on porosity, density and elasticity, these being the properties which have the greatest influence on the closure capacity of the stopper. The elasticity of the cork stopper is measured through the relaxation ratio, which is defined by the relationship between the relaxation force exerted by the cork in the bottleneck and the compressive force exerted by a caliper to fit the stopper in the bottle. The relaxation ratio, defined in this way, represents the part of the compression force which is applied to the stopper on insertion and which is recovered in the form of the relaxation force to achieve closure. The calculation of the relaxation ratio involves the measurement of the relaxation force of the fitted stopper. This force has been measured rigorously and precisely using a device developed in the Cork Laboratory at the INIA-CIFOR and which is presented for the first time in this paper.

Application of Decision Theory methods for a Community of Madrid Soil classification case

A land classification method was designed for the Community of Madrid (CM), which has lands suitable for either agriculture use or natural spaces. The process started from an extensive previous CM study that contains sets of land attributes with data for 122 types and a minimum-requirements method providing a land quality classification (SQ) for each land. Borrowing some tools from Operations Research (OR) and from Decision Science, that SQ has been complemented by an additive valuation method that involves a more restricted set of 13 representative attributes analysed using Attribute Valuation Functions to obtain a quality index, QI, and by an original composite method that uses a fuzzy set procedure to obtain a combined quality index, CQI, that contains relevant information from both the SQ and the QI methods.

Optimización de los procesos de medida e interpretación de la tomografía geoeléctrica en la prospección superficial

Debido al carácter innovador de los objetivos científico-tecnológicos planteados al inicio de la presente Tesis doctoral, además de la primera recopilación bibliográfica, a lo largo del desarrollo de la misma se ha realizado una actualización bibliográfica continua centrada en los desarrollos relativos a la instrumentación, las aplicaciones y los procesos de interpretación de las técnicas de tomografía eléctrica. Durante el desarrollo del presente trabajo, se han realizado una serie de campañas diferenciadas, tanto por los ambientes geológicos y las condiciones antrópicas en los que se han efectuado los perfiles geoeléctricos, como por la profundidad y los objetivos de la prospección. En esas campañas se han obtenido, mediante el programa Res2DInv, las secciones tomográficas con la configuración de variables por defecto y se ha realizado una interpretación estructural de las mismas. Como parte central del desarrollo de esta investigación se han efectuado varios procesos de optimización: Comparación y optimización de los dispositivos empleados para la medición de perfiles de resistividad de cara a la obtención de secciones tomográficas que presenten la mayor resolución en distintos ambientes geológicos. Selección de los rangos de representación (lineales y logarítmicos) y de la gradación cromática que, pudiendo adoptarse de forma generalizada, permita la mejor interpretación gráfica para usuarios no avanzados. Diseño de criterios para la selección del factor de amortiguamiento, como parámetro crítico en los procesos de inversión tomográfica de perfiles geoeléctricos de superficie, de forma que los modelos resultantes alcancen la mejor relación entre fiabilidad y error respecto a los valores medidos. Paralelamente a los procesos anteriores se ha definido un índice de calidad de la inversión, que es directamente normalizado y que permite evaluar el grado en el que pueden considerarse fiables tanto los valores de resistividad obtenidos como su distribución espacial. El índice desarrollado (IRI) está basado en la influencia que tiene la resistividad inicial del modelo de inversión en los valores de cada una de las celdas de la malla de inversión. Tras un exhaustivo análisis estadístico se ha verificado que, a diferencia de otros índices utilizados hasta la fecha, dicho índice no está afectado ni por la profundidad de investigación y la resolución de los dispositivos, ni por la distribución de resistividades que presente el subsuelo. ABSTRACT Due to the innovative character of the scientific and technological objectives proposed at the beginning of this thesis, in addition to preparatory bibliographic reference, a constant bibliographic update on developments related to instrumentation, applications and interpretation processes for electric tomography has been performed all through the development of the work. Several measuring campaigns were performed during the development of the thesis. These campaigns, in which the geoelectric profiles were measured, varied in several aspects, both in the geological and anthropic conditions, and also in the depth and objectives of the prospection. Tomographic sections were obtained and interpretated by making use of the Res2DInv software configured with the default variables. As part of the core development in this research, several optimization processes have been done: Comparison and optimization of the devices used in the measurement of resistivity profiles. This optimization allows increasing the resolution of tomographic sections in different geological conditions. Selection of the best visual representation for the tomographic sections. This involves the selection of the range of values and type of scale (linear vs. logarithmic) as well as the chromatic graduation. This selection allows improving the interpretation of tomographic sections for the non-expert eye. Devising of criteria for the selection of the damping factor, as the critical parameter in processes of tomographic inversion of superficial geoelectrical profiles. The use of these criteria allows selecting the best factors to obtain the best ratio between reliability and error (in relation to the mean values) for the resulting model. In addition to the aforementioned processes, and as part of the work within this thesis, it has been defined a normalized quality index for inversion. This index allows evaluating the degree of reliability of the obtained resistivity values and spatial distribution. The developed index, termed IRI in the thesis, is based on the influence shown by the initial resistivity of the inversion model on the values of each of the cells of the inversion mesh. After an exhaustive statistical analysis it was verified that the IRI index is neither affected by the investigation depth, nor the resolution of the devices, nor the resistivity’s distribution of the sub soil. This independency is a unique characteristic of the IRI index, not present in other indexes developed and used till date.

Use of the First Derivative of Spectral Reflectance to Detect Mold on Tomatoes

The first derivative of spectral reflectance of tomatoes was studied to see whether it can detect molds and sunscald damage on the fruit. The results indicate that a quality index based on the derivative values of reflectance at 590- and 710-nm wavelengths can be used to separate good tomates from those with black mold, gray mold, and sunscald.

Sistemas de Gestión de la Calidad. Metodología para implementar proyectos de mejora continua para la reducción de los defectos de construcción en edificación de viviendas

La mejora continua debería estar presente siempre en las empresas, dispongan o no de sistemas de gestión. Sin embargo, su aplicación en el sector de la construcción es especialmente difícil debido a las características particulares del mismo. Por este motivo se plantea el objetivo principal de esta Tesis Doctoral: “Establecer una metodología de trabajo que permita a las empresas constructoras implantar proyectos de mejora continua para incrementar la calidad de las viviendas entregadas a los usuarios”. En la investigación llevada a cabo se han inspeccionado 818 viviendas, recogiendo un total de 82.550 incidencias, las cuales se han analizado aplicando cuatro de las siete herramientas estadísticas básicas de la mejora continua (Hoja de recogida de datos, Estratificación, Histograma y Diagrama de Pareto), concluyendo que los tres oficios que concentran el 80% de los defectos, en los que convendría actuar para reducir de manera significativa los fallos de construcción en la fase de pre-entrega, son: Carpintería de Madera, Revestimientos Cerámicos e Instalación de Electricidad. De entre estos tres oficios se ha seleccionado el de Revestimientos Cerámicos para poner en práctica un proyecto de mejora continua. Analizando los datos relativos a este oficio se elabora un listado de 25 defectos tipo en los que se pueden agrupar todas las incidencias detectadas. Aplicando de nuevo las cuatro herramientas básicas de la calidad se destacan los 10 defectos tipo con mayor impacto en volumen de incidencias y en coste de reparación, para focalizar los esfuerzos de mejora. Con esta información se elabora un documento de criterios técnicos para la ejecución de los Revestimientos Cerámicos que se implanta, en parte, en varias obras para tratar de reducir los defectos detectados en las viviendas antes de la entrega a sus propietarios, y se definen unos Índices de Calidad para medir los resultados. Se toman datos de nuevo a 6 y 20 meses desde la implantación del protocolo, se analizan y se calculan los resultados del proyecto de mejora, concluyendo que se está avanzando positivamente. En base a toda la información recogida a lo largo del proceso de la investigación y de la experiencia del proyecto de mejora implantado, se presenta una propuesta de metodología para implementar proyectos de mejora, así como la documentación recomendada para su puesta en práctica, además de la documentación técnica específica para la prevención de los defectos de construcción en Revestimientos Cerámicos incluyendo las fichas de control para la recepción de materiales, control de ejecución y control de recepción del revestimiento terminado. ABSTRACT Continuous improvement should always be a core value in firms of all kinds, whether or not they implement management systems. Nevertheless, its application in the construction sector seems especially difficult due to its inherent intricacies and complexity. The study of this phenomenon is the main aim of the hereby presented PhD dissertation "Establishment of a working methodology that allows construction (related) firms to carry out projects of continuous improvement in order to increase the quality of housing upon delivery to the client". In the present research 818 housing units have been inspected, collecting a total of 82550 incidence entries, which have been analyzed by means of 4 out of the 7 basic statistical tools of continuous improvement: Data collection sheets, stratification, histogram, and Pareto diagram. The data shows that the 3 main trades where special actions should be taken in order to significantly reduce construction defects are: carpentry, ceramic cladding, and electricity systems. These trades combined account for the 80% of the total defects detected during the inspections. Among the mentioned works, ceramic tiling is selected as a continuous improvement case study project. Analysing data relative to this specific trade, a list of 25 defect types is developed. These types gather all detected defects under this group. Further applying the four statistical tools referred to above, the 10 most significant events are highlighted as to clearly determine the improvement measures. These events have the most impact on both volume of defects and reparation costs. This information is then put together in a document of technical criteria for the correct execution of ceramic tiling that is implemented in various ongoing projects under construction as to minimize the defects prior to the final delivery to the client. Also, a series of Quality Index are defined as criteria for execution suitability. 6 to 20 months after the implementation of this control protocol, the same process is repeated with the purpose of comparing results. It is concluded that a positive evolution takes place. Based both on the information collected throughout the research process and the experience of the case study, the dissertation proposes a methodology to successfully implement improvement projects along with reference documentation and specific technical documents for the prevention of construction defects in ceramic tiling, including (i) material reception control sheets, (ii) an execution control sheet, and a sheet relative to the (iii) control of the finished cladding.

Decision-Making Mechanism to Organize the Agenda of a Guide-Robot

One of the major challenges in evolutionary robotics is constituted by the need of the robot being able to make decisions on its own, in accordance with the multiple tasks programmed, optimizing its timings and power. In this paper, we present a new automatic decision making mechanism for a robot guide that allows the robot to make the best choice in order to reach its aims, performing its tasks in an optimal way. The election of which is the best alternative is based on a series of criteria and restrictions of the tasks to perform. The software developed in the project has been verified on the tour-guide robot Urbano. The most important aspect of this proposal is that the design uses learning as the means to optimize the quality in the decision making. The modeling of the quality index of the best choice to perform is made using fuzzy logic and it represents the beliefs of the robot, which continue to evolve in order to match the "external reality”. This fuzzy system is used to select the most appropriate set of tasks to perform during the day. With this tool, the tour guide-robot prepares its agenda daily, which satisfies the objectives and restrictions, and it identifies the best task to perform at each moment. This work is part of the ARABOT project of the Intelligent Control Research Group at the Universidad Politécnica de Madrid to create "awareness" in a robot guide.

Effects of the main cereal and type of fat of the diet on productive performance and egg quality of brown egg laying hens from twenty two to fifty four weeks of age

The influence of the main cereal and supplemental fat of the diet on productive performance and egg quality was studied in 756 brown-egg laying hens from 22 to 54 weeks of age. The experiment was conducted as a completely randomized design with 9 treatments arranged factorially with 3 cereals (dented corn, soft wheat, and barley) and 3 types of fat [soy oil (SBO), acidulated soapstocks (AOS), and lard].

Influence of soy oil source and supplementation of the diet with vitamin E and vi tamin C on performance and egg quality of Single Comb White Leghourn lyaing hens from forty four to fity six weeks of age

Two experiments (Exp.) were conducted to determine the AME content of refined soybean oil (SO), recycled soybean oil (RSO), and acidulated soybean oil soapstocks (ASO) and the effects of inclusion of vitamin E and vitamin C in diets containing 3.5% of these soy oils on performance and egg quality of Hy-line hens from 44 to 56 wks of age.

Influence of main cereal and mean particle size of the diet on productive performance and egg quality of brown-laying hens

Influencia de cereal principal y el tamaño medio de partícula de la dieta sobre el desempeño productivo y calidad de los huevos de las gallinas marrones para puesta.

Evaluating the quality of riparian forest vegetation: The Riparian Forest Evaluation (RFV) index

Aim of study: This paper presents a novel index, the Riparian Forest Evaluation (RFV) index, for assessing the ecological condition of riparian forests. The status of riparian ecosystems has global importance due to the ecological and social benefits and services they provide. The initiation of the European Water Framework Directive (2000/60/CE) requires the assessment of the hydromorphological quality of natural channels. The Directive describes riparian forests as one of the fundamental components that determine the structure of riverine areas. The RFV index was developed to meet the aim of the Directive and to complement the existing methodologies for the evaluation of riparian forests. Area of study: The RFV index was applied to a wide range of streams and rivers (170 water bodies) inSpain. Materials and methods: The calculation of the RFV index is based on the assessment of both the spatial continuity of the forest (in its three core dimensions: longitudinal, transversal and vertical) and the regeneration capacity of the forest, in a sampling area related to the river hydromorphological pattern. This index enables an evaluation of the quality and degree of alteration of riparian forests. In addition, it helps to determine the scenarios that are necessary to improve the status of riparian forests and to develop processes for restoring their structure and composition. Main results: The results were compared with some previous tools for the assessment of riparian vegetation. The RFV index got the highest average scores in the basins of northernSpain, which suffer lower human influence. The forests in central and southern rivers got worse scores. The bigger differences with other tools were found in complex and partially altered streams and rivers. Research highlights: The study showed the index’s applicability under diverse hydromorphological and ecological conditions and the main advantages of its application. The utilization of the index allows a better understanding of the status of riparian forests, and enhances improvements in the conservation and management of riparian areas.