An Autonomous Engine for Services Configuration and Deployment.

The runtime management of the infrastructure providing service-based systems is a complex task, up to the point where manual operation struggles to be cost effective. As the functionality is provided by a set of dynamically composed distributed services, in order to achieve a management objective multiple operations have to be applied over the distributed elements of the managed infrastructure. Moreover, the manager must cope with the highly heterogeneous characteristics and management interfaces of the runtime resources. With this in mind, this paper proposes to support the configuration and deployment of services with an automated closed control loop. The automation is enabled by the definition of a generic information model, which captures all the information relevant to the management of the services with the same abstractions, describing the runtime elements, service dependencies, and business objectives. On top of that, a technique based on satisfiability is described which automatically diagnoses the state of the managed environment and obtains the required changes for correcting it (e.g., installation, service binding, update, or configuration). The results from a set of case studies extracted from the banking domain are provided to validate the feasibility of this proposa

Public support for the deployment of next generation access networks-Common themes, methodological caveats and further research

Next generation telecommunications infrastructures are considered as a principal example of a new technology for sustainable economic growth. From their deployment it is expected that a wealth of innovations – hopefully converted into economic growth – new sources of employment and improved quality of life will result. In line with these prospects, public administrations at supranational, national, regional and local levels have encouraged the development of these new infrastructures. Moreover, in times of economic crisis, public assistance to deploy such networks encompasses the promise of placing a weak economy on the road to prosperity. However, such arguments and political claims clearly require rigorous assessment. In particular, any such assessment must adequately address the appropriate form of modelling that best captures key elements for identifiable progress from next generation access networks (NGAN).

Communication Architecture for Tracking and Interoperable Services at Hospitals: A Real Deployment Experience

Any new hospital communication architecture has to support existing services, but at the same time new added features should not affect normal tasks. This article deals with issues regarding old and new systems’ interoperability, as well as the effect the human factor has in a deployed architecture. It also presents valuable information, which is a product of a real scenario. Tracking services are also tested in order to monitor and administer several medical resources.

Clean Coal Technologies Scenario and Evaluation of Present CO2 Dwindling Initiatives to Approach Zero Emission Power Stations By Coal Combustion. Deployment Situation and Evaluation Study

In the present uncertain global context of reaching an equal social stability and steady thriving economy, power demand expected to grow and global electricity generation could nearly double from 2005 to 2030. Fossil fuels will remain a significant contribution on this energy mix up to 2050, with an expected part of around 70% of global and ca. 60% of European electricity generation. Coal will remain a key player. Hence, a direct effect on the considered CO2 emissions business-as-usual scenario is expected, forecasting three times the present CO2 concentration values up to 1,200ppm by the end of this century. Kyoto protocol was the first approach to take global responsibility onto CO2 emissions monitoring and cap targets by 2012 with reference to 1990. Some of principal CO2emitters did not ratify the reduction targets. Although USA and China spur are taking its own actions and parallel reduction measures. More efficient combustion processes comprising less fuel consuming, a significant contribution from the electricity generation sector to a CO2 dwindling concentration levels, might not be sufficient. Carbon Capture and Storage (CCS) technologies have started to gain more importance from the beginning of the decade, with research and funds coming out to drive its come in useful. After first researching projects and initial scale testing, three principal capture processes came out available today with first figures showing up to 90% CO2 removal by its standard applications in coal fired power stations. Regarding last part of CO2 reduction chain, two options could be considered worthy, reusing (EOR & EGR) and storage. The study evaluates the state of the CO2 capture technology development, availability and investment cost of the different technologies, with few operation cost analysis possible at the time. Main findings and the abatement potential for coal applications are presented. DOE, NETL, MIT, European universities and research institutions, key technology enterprises and utilities, and key technology suppliers are the main sources of this study. A vision of the technology deployment is presented.

An Analysis of Next Generation Access Networks Deployment in rural areas

Next generation access networks (NGAN) will support a renewed electronic communication market where main opportunities lie in the provision of ubiquitous broadband connectivity, applications and content. From their deployment it is expected a wealth of innovations. Within this framework, the project reviews the variety of NGAN deployment options available for rural environments, derives a simple method for approximate cost calculations, and then discusses and compares the results obtained. Data for Spain are used for practical calculations, but the model is applicable with minor modifications to most of the rural areas of European countries. The final part of the paper is devoted to review the techno-economic implications of a network deployment in a rural environment as well as the adequacy and possible developments of the regulatory framework involved

Model-Driven Methodology for Rapid Deployment of Smart Spaces based on Resource-Oriented Architectures

Advances in electronics nowadays facilitate the design of smart spaces based on physical mash-ups of sensor and actuator devices. At the same time, software paradigms such as Internet of Things (IoT) and Web of Things (WoT) are motivating the creation of technology to support the development and deployment of web-enabled embedded sensor and actuator devices with two major objectives: (i) to integrate sensing and actuating functionalities into everyday objects, and (ii) to easily allow a diversity of devices to plug into the Internet. Currently, developers who are applying this Internet-oriented approach need to have solid understanding about specific platforms and web technologies. In order to alleviate this development process, this research proposes a Resource-Oriented and Ontology-Driven Development (ROOD) methodology based on the Model Driven Architecture (MDA). This methodology aims at enabling the development of smart spaces through a set of modeling tools and semantic technologies that support the definition of the smart space and the automatic generation of code at hardware level. ROOD feasibility is demonstrated by building an adaptive health monitoring service for a Smart Gym.

Automatic-dependent surveillance-broadcast experimental deployment using system wide information management

This paper describes an automatic-dependent surveillance-broadcast (ADS-B) implementation for air-to-air and ground-based experimental surveillance within a prototype of a fully automated air traffic management (ATM) system, under a trajectory-based-operations paradigm. The system is built using an air-inclusive implementation of system wide information management (SWIM). This work describes the relations between airborne and ground surveillance (SURGND), the prototype surveillance systems, and their algorithms. System's performance is analyzed with simulated and real data. Results show that the proposed ADS-B implementation can fulfill the most demanding surveillance accuracy requirements.

Deployment of urban agriculture in East Lima, Peru.

Urban agriculture in Lima has been promoted by the project Farmers in the city encompassed in the Urban harvest program promoted by the Consultive Group on International Agricultural Research (CGIAR). The validation of the effectiveness of the project Farmers in the city can only be confirmed by maintenance over the time the deployment of the project goals. The project Farmers in the city was carried out by the International Potato Center (CIP) and GESPLAN research group of the Technical University of Madrid. The project was conducted at the East Cone of Lima, Peru, from 2006 to 2008. This communication shows the situation 5 years later. In order to know the current situation all the members of Cosanaca producer association, which was created under the project, have been interviewed. Besides, an expert panel was carried out with the responsible of the urban agricultural office of the municipalities that participate in the project. The results show that Cosanaca has duplicated the number of producers and that the municipalities have increased the number of workers.

Deployment and validation of a smart system for screening of language disorders in primary care

Neuro-evolutive development from birth until the age of six years is a decisive factor in a child?s quality of life. Early detection of development disorders in early childhood can facilitate necessary diagnosis and/or treatment. Primary-care pediatricians play a key role in its detection as they can undertake the preventive and therapeutic actions requested to promote a child?s optimal development. However, the lack of time and little specific knowledge at primary-care avoid to applying continuous early-detection anomalies procedures. This research paper focuses on the deployment and evaluation of a smart system that enhances the screening of language disorders in primary care. Pediatricians get support to proceed with early referral of language disorders. The proposed model provides them with a decision-support tool for referral actions to trigger essential diagnostic and/or therapeutic actions for a comprehensive individual development. The research was conducted by starting from a sample of 60 cases of children with language disorders. Validation was carried out through two complementary steps: first, by including a team of seven experts from the fields of neonatology, pediatrics, neurology and language therapy, and, second, through the evaluation of 21 more previously diagnosed cases. The results obtained show that therapist positively accepted the system proposal in 18 cases (86%) and suggested system redesign for single referral to a speech therapist in three remaining cases.

Deployment of an all-in-one millimetre-wave anechoic chamber

This paper describes the new anechoic chamber available at The University of Kent, UK. This facility includes a spherical near/far field, planar near field, cylindrical near field and a compact range. The facility allows measurement from 600 MHz up to 110 MHz. The spherical, planar and cylindrical ranges covers up to 40 GHz and the compact range is available from 50 GHz up to 110 MHz. Immediate plans are to use the new facility to measure body-centric antennas and sensing nodes together with near field sampling of finite sized Frequency Selective Surfaces.

Environmental Wireless Sensor Network Deployment in Food Industry: from Theory to Practice

The difficulty behind Wireless Sensor Network deployments in industrial environments not only resides in the number of nodes or the communication protocols but also in the real location of the sensor nodes and the parameters to be monitored. Sensor soiling, high humidity and unreachable locations, among others, make real deployments a very difficult task to plan. Even though it is possible to find myriad approaches for floor planners and deployment tools in the state of the art, most of these problems are very difficult to model and foresee before actually deploying the network in the final scenario. This work shows two real deployments in food factories and how their problems are found and overcome.

Accessible interaction solution based on confidence for the deployment of pervasive sensitive services in intelligent environments

Los servicios basados en las Tecnologías de la Información y las Comunicaciones (TIC) están cada vez más presentes en la vida de las personas. El avance de las TIC en términos técnicos y de aceptación social ha dado lugar la creación de nuevos modelos de provisión de servicios. Estos modelos de servicio implican una mayor integración con las actividades de las personas de forma que ya no solo están presentes en su ámbito profesional o de espacio ciudadano sino también en un ámbito más íntimo relacionado con su propia identidad. Así en la actualidad es común encontrar servicios conocedores del estado de salud de las personas, sus hábitos domésticos, su ideología, etc. Por tanto el análisis de los servicios actuales no puede limitarse a una componente técnica sino que es más necesario que nunca la inclusión de aspectos más relacionados con la forma de ser y sentir de sus usuarios. De esta forma no solo se garantizará la corrección técnica de sus funcionalidades sino que también se fomentará la generación de soluciones cívicamente seguras y respetuosas tanto con los derechos como con la forma de ser y sentir de sus usuarios. Desde el punto de vista de ingeniería, la perspectiva del usuario se ha englobado históricamente bajo el concepto de aceptación tecnológica. Dentro de este ámbito se puede interpretar que soluciones respetuosas y adaptadas a los usuarios fomentarán la aceptación por parte de éstos. La aceptación de una solución es algo deseable si bien es difícil de asegurar. Esta dificultad es debida al desconocimiento del número de variables que afectan a la aceptación de soluciones tecnológicas y a la dificultad de optimización de las variables conocidas. En esta tesis doctoral se estudia y caracteriza una de las variables que afecta a la aceptación de los servicios actuales: la confianza. Se define la confianza en términos psicológicos caracterizándola para permitir su uso en los métodos propios de la ingeniería. Además se proponen distintas herramientas que facilitan la optimización de la confianza en servicios cuya complejidad convierte a esta variable en una cuestión básica para mejorar la aceptación. Como contexto de trabajo para la tesis se ha escogido un servicio de salud desplegado en un hogar. Este escenario presenta una serie de restricciones de aceptación relativas a la tecnología utilizada para la creación de los servicios y la forma en que éstos gestionan la información adquirida del usuario. Se trata de servicios altamente sensibles y deslocalizados que pueden afectar a la percepción del usuario sobre el entorno, el hogar, y generar temores o rechazos que impidan su adopción final como solución válida. Una vez definido el marco genérico de trabajo, el objetivo principal de esta tesis doctoral se concreta en contribuir al fomento de la aceptación de nuevos servicios de salud pervasivos y personalizados y su despliegue en entornos inteligentes domésticos mediante un marco de diseño que promueva un estado psicológico de confianza en los usuarios. Para lograr abordar correctamente este objetivo se han proporcionado una serie de resultados tanto a nivel conceptual como tecnológico y experimental. En concreto se ha ofrecido una caracterización completa del sentimiento de confianza desde un punto de vista de ingeniería y una definición del concepto de servicio sensible deslocalizado o pervasivo. Además se ofrece un método para la inclusión del Diseño de Interacción, herramienta muy relacionada con la mejora de las variables de aceptación de tecnología, en los procesos de ingeniería de este tipo de servicios mediante un conjunto de patrones de interacción Persona – Entorno Inteligente. Finalmente se ha proporcionado el desarrollo de una arquitectura software para garantizar el correcto despliegue de estos servicios sensibles pervasivos en espacios inteligentes de una forma confiable. La discusión de los resultados obtenidos sugiere la extensión del modelo a diferentes servicios de la Sociedad de la Información que manejen datos sensibles tanto en el contexto del Hogar Digital como otros contextos donde el usuario realice actividades cotidianas, como los espacios de trabajo o los centros educativos. Las líneas de trabajo futuras contemplan la necesidad inminente de aplicar los resultados a desarrollos en curso, dentro de proyectos de investigación en los que participa el autor así como el desarrollo de nuevas líneas de investigación orientadas a la generación de nuevos espacios y tecnologías de interacción como el Colegio Digital, juguetes del futuro, sistemas de visualización confiables o sistemas de seguridad basados en el estado de las personas.

Cost-free feed-in tariffs for renewable energy deployment in Spain

Feed-in-tariff (FIT) schemes have been widely employed to promote renewable energy deployment. While FITs may be perceived by consumers as an extra cost, renewable energies cause a noticeable price reduction in wholesale electricity markets. We analyse both effects for the case of the Spanish electricity market during 2010. In particular, we examine the level of FITs that makes savings and extra costs to be similar on an hourly basis. Results are obtained for a wide range of renewable generation scenarios. It is found that FITs with null extra costs for consumers are in the range of 50–80 €/MWh. Some of the side-effects of a high penetration of renewable energy in the market are analysed in detail and discussed.