Fruit firmness and skin resistance of processing tomato varieties tested in Badajoz (Spain), related to mechanical harvesting.

Determinations of resistance to damage were carried out in a total of 31 tomato varieties for processing, with the purpose of choosing the most suitable ones for mechanical harvesting. The characteristics studied include: puncture, deformation and rupture of the fruits, the ease of detachment of the fruits also being determined. Seventeen varieties were chosen, for further tests, with values 0.76 to 1.7 2 N of resistance to puncture; 3 to 9 N/mm of resistance to compression and 2.16 to 29.40 N resistance to detachment.

Uncertainty in ellipse fitting using a flatbed scanner: development and experimental verification

In the field of dimensional metrology, the use of optical measuring machines requires the handling of a large number of measurement points, or scanning points, taken from the image of the measurand. The presence of correlation between these measurement points has a significant influence on the uncertainty of the result. The aim of this work is the development of an estimation procedure for the uncertainty of measurement in a geometrically elliptical shape, taking into account the correlation between the scanning points. These points are obtained from an image produced using a commercial flat bed scanner. The characteristic parameters of the ellipse (coordinates of the center, semi-axes and the angle of the semi-major axis with regard to the horizontal) are determined using a least squares fit and orthogonal distance regression. The uncertainty is estimated using the information from the auto-correlation function of the residuals and is propagated through the fitting algorithm according to the rules described in Evaluation of Measurement Data—Supplement 2 to the ‘Guide to the Expression of Uncertainty in Measurement’—Extension to any number of output quantities. By introducing the concept of cut-off length, it can be observed how it is possible to take into account the presence of the correlation in the estimation of uncertainty in a very simple way while avoiding underestimation.

A proposed two-stage two-tether scientific mission at Jupiter

A two-stage mission to place a spacecraft (SC) below the Jovian radiation belts, using a spinning bare tether with plasma contactors at both ends to provide propulsion and power,is proposed. Capture by Lorentz drag on the tether, at the periapsis of a barely hyperbolic equatorial orbit, is followed by a sequence of orbits at near-constant periapsis, drag finally bringing the SC down to a circular orbit below the halo ring. Although increasing both tether heating and bowing, retrograde motion can substantially reduce accumulated dose as compared with prograde motion, at equal tether-to-SC mass ratio. In the second stage,the tether is cut to a segment one order of magnitude smaller, with a single plasma contactor, making the SC to slowly spiral inward over severalmonths while generating large onboard power, which would allow multiple scientific applications, including in situ study of Jovian grains, auroral sounding of upper atmosphere, and space- and time-resolved observations of surface and subsurface.

Discriminación del estado de la carretera mediante procesado acústico en vehículo

La rápida adopción de dispositivos electrónicos en el automóvil, ha contribuido a mejorar en gran medida la seguridad y el confort. Desde principios del siglo 20, la investigación en sistemas de seguridad activa ha originado el desarrollo de tecnologías como ABS (Antilock Brake System), TCS (Traction Control System) y ESP (Electronic Stability Program). El coste de despliegue de estos sistemas es crítico: históricamente, sólo han sido ampliamente adoptados cuando el precio de los sensores y la electrónica necesarios para su construcción ha caído hasta un valor marginal. Hoy en día, los vehículos a motor incluyen un amplio rango de sensores para implementar las funciones de seguridad. La incorporación de sistemas que detecten la presencia de agua, hielo o nieve en la vía es un factor adicional que podría ayudar a evitar situaciones de riesgo. Existen algunas implementaciones prácticas capaces de detectar carreteras mojadas, heladas y nevadas, aunque con limitaciones importantes. En esta tesis doctoral, se propone una aproximación novedosa al problema, basada en el análisis del ruido de rodadura generado durante la conducción. El ruido de rodadura es capturado y preprocesado. Después es analizado utilizando un clasificador basado en máquinas de vectores soporte (SVM), con el fin de generar una estimación del estado del firme. Todas estas operaciones se realizan en el propio vehículo. El sistema propuesto se ha desarrollado y evaluado utilizando Matlabr, mostrando tasas de aciertos de más del 90%. Se ha realizado una implementación en tiempo real, utilizando un prototipo basado en DSP. Después se han introducido varias optimizaciones para permitir que el sistema sea realizable usando un microcontrolador de propósito general. Finalmente se ha realizado una implementación hardware basada en un microcontrolador, integrándola estrechamente con las ECU del vehículo, pudiendo obtener datos capturados por los sensores del mismo y enviar las estimaciones del estado del firme. El sistema resultante ha sido patentado, y destaca por su elevada tasa de aciertos con un tamaño, consumo y coste reducidos. ABSTRACT Proliferation of automotive electronics, has greatly improved driving safety and comfort. Since the beginning of the 20th century, investigation in active safety systems has resulted in the development of technologies such as ABS (Antilock Brake System), TCS (Traction Control System) and ESP (Electronic Stability Program). Deployment cost of these systems is critical: historically, they have been widely adopted only when the price of the sensors and electronics needed to build them has been cut to a marginal value. Nowadays, motor vehicles include a wide range of sensors to implement the safety functions. Incorporation of systems capable of detecting water, ice or snow on the road is an additional factor that could help avoiding risky situations. There are some implementations capable of detecting wet, icy and snowy roads, although with important limitations. In this PhD Thesis, a novel approach is proposed, based on the analysis of the tyre/road noise radiated during driving. Tyre/road noise is captured and pre-processed. Then it is analysed using a Support Vector Machine (SVM) based classifier, to output an estimation of the road status. All these operations are performed on-board. Proposed system is developed and evaluated using Matlabr, showing success rates greater than 90%. A real time implementation is carried out using a DSP based prototype. Several optimizations are introduced enabling the system to work using a low-cost general purpose microcontroller. Finally a microcontroller based hardware implementation is developed. This implementation is tightly integrated with the vehicle ECUs, allowing it to obtain data captured by its sensors, and to send the road status estimations. Resulting system has been patented, and is notable because of its high hit rate, small size, low power consumption and low cost.

Conservación de plantas regeneradas in vitro y análisis de la variación somaclonal de Cinchona officinalis, Linneo

Cinchona officinalis (Rubiaceae), especie endémica del Valle de Loja, ubicado en la región sur del Ecuador, es un recurso forestal de importancia medicinal y ecológica, además la especie ha sido catalogada como planta nacional y es un ícono de la región sur por su aporte a la farmacopea mundial. Esta especie, entre los siglos XVII-XIX sufrió una gran presión en sus poblaciones debido a la extracción masiva de la corteza para la cura del paludismo. Aunque la actividad extractiva generó grandes ingresos a la Corona Española y a la región Sur del Ecuador, ésta fue poco o nada sustentable ecológicamente, provocando la desaparición de la especie en muchos sitios de la provincia, pues, en su momento, no se consideraron alternativas de recuperación de las poblaciones naturales. Actualmente la extracción y consumo de la corteza en la zona de origen es baja o nula, sin embargo esta zona enfrenta nuevas amenazas. La deforestación a causa de proyectos de desarrollo en infraestructuras, la práctica de actividades agrícolas y de ganadería, y los efectos del cambio climático han ocasionado, en estos últimos años, la fragmentación de los ecosistemas. La mayoría de los bosques del sur del Ecuador se han convertido en parches aislados (los bosques en los que se distribuye C. officinalis no son la excepción) siendo esta la principal causa para que la especie se encuentre en estado de amenaza. Los individuos de la especie tienen una alta capacidad de rebrote y producen semillas durante todo el año; sin embargo la capacidad germinativa y la tasa de sobrevivencia son bajas, además de estas dificultades la especie requiere de la asociación con otras especies vegetales para su desarrollo, lo cual ha limitado su distribución en pequeños parches aislados. Con esta problemática, la recuperación natural de las poblaciones es una necesidad evidente. Varios trabajos y esfuerzos previos se han realizado a nivel local: i. Identificación de la distribución actual y potencial; ii. Determinación de la fenología y fructificación iii. Programas de educación ambiental, iv. Análisis moleculares para determinar la diversidad genética. v. Ensayos de propagación vegetativa; y otras acciones de tipo cultural. No obstante, el estado de conservación y manejo de las poblaciones naturales no ha mejorado significativamente, siendo necesaria la aplicación de estrategias integradas de conservación in situ y ex situ, que permitan la recuperación y permanencia de las poblaciones naturales a largo plazo. El presente trabajo tiene como fin dar alternativas para el cultivo de tejidos in vitro de Cinchona officinalis centrados en la propagación masiva a partir de semillas, análisis de la fidelidad genética y alternativas de conservación de tejidos. Los objetivos específicos que se plantean son: i. Analizar el proceso de germinación y proliferación in vitro. ii. Evaluar la estabilidad genética en explantes cultivados in vitro, mediante marcadores ISSR. iii. Establecer protocolos de conservación in vitro mediante limitación del crecimiento y criopreservación de segmentos nodales y yemas. Los resultados más significativos de esta investigación fueron: i. El desarrollo de protocolos eficientes para mejorar los porcentajes de germinación y la proliferación de brotes en explantos cultivados in vitro. Para evaluar el efecto de los fenoles sobre la germinación, se determinó el contenido total de fenoles y el porcentaje de germinación en semillas de C. officinalis comparados con una especie de control, C. pubescens. Para inducir a proliferación, se utilizaron segmentos nodales de plántulas germinadas in vitro en medio Gamborg (1968) suplementado con diferentes combinaciones de reguladores de crecimiento (auxinas y citoquininas). Los resultados obtenidos sugieren que el contenido de compuestos fenólicos es alto en las semillas de C. officinalis en comparación con las semillas de C. pubescens. Estos fenoles pueden eliminarse con peróxido de hidrógeno o con lavados de agua para estimular la germinación. La formación de nuevos brotes y callos en la mayoría de las combinaciones de reguladores de crecimiento se observó en un período de 45 días. El mayor porcentaje de proliferación de brotes, formación de callos y presencia de brotes adventicios se obtuvo en medio Gamborg (B5) suplementado con 5.0 mg/l 6-bencil-aminopurina y 3.0 mg/l de ácido indol-3-butírico. ii. La evaluación de la fidelidad genética de los explantes obtenidos con distintas combinaciones de reguladores de crecimiento vegetal y diversos subcultivos. Se realizó el seguimiento a los explantes obtenidos de la fase anterior, determinando el índice de multiplicación y analizando la fidelidad genética de los tejidos obtenidos por las dos vías regenerativas: brotación directa y regeneración de brotes a partir de callos. Este análisis se realizó por amplificación mediante PCR de las secuencias ubicadas entre microsatélites-ISSR (Inter simple sequence repeat). El medio Gamborg (B5) con 3.0 mg/l de AIB y 5.0 mg/l de BAP usado como medio de inducción en la primera etapa de cultivo generó el mayor índice de proliferación (11.5). Un total de 13 marcadores ISSR fueron analizados, 6 de éstos fueron polimórficos. El mayor porcentaje de variación somaclonal fue inducido en presencia de 1.0 mg/l 2,4-D combinado con 0.2 mg/l Kin con un 1.8% en el segundo sub-cultivo de regeneración, la cual incrementó a 3.6% en el tercer sub-cultivo. Todas las combinaciones con presencia de 2,4-D produjeron la formación de callos y presentaron variación genética. Por su parte la fidelidad genética se mantuvo en los sistemas de propagación directa a través de la formación de brotes a partir de meristemos preformados. iii. El establecimiento de protocolos de conservación in vitro y crioconservación de segmentos nodales y yemas. Para la conservación limitando el crecimiento, se cultivaron segmentos nodales en los medios MS y B5 en tres concentraciones de sus componentes (25, 50 y 100%); y en medio B5 más agentes osmóticos como el manitol, sorbitol y sacarosa en diferentes concentraciones (2, 4 y 8%); los cultivos se mantuvieron por 12 meses sin subcultivos. Para el establecimiento de protocolos para la crioconservación (paralización del metabolismo) se usaron yemas axilares y apicales a las cuales se les aplicaron los métodos de encapsulación-deshidratación y vitrificación. La efectividad de los protocolos usados se determinó en función de la sobrevivencia, reducción del crecimiento y regeneración. Los resultados obtenidos en este apartado reflejan que un crecimiento limitado puede mantener tejidos durante 12 meses de almacenamiento, usando medio B5 más manitol entre 2 y 8%. En los protocolos de crioconservación, se obtuvo el mayor porcentaje de recuperación tras la congelación en NL en el tratamiento control seguido por el método crioprotector de encapsulación-deshidratación. Este trabajo brinda alternativas para la propagación de C. officinalis bajo condiciones in vitro, partiendo de material vegetal con alta diversidad genética. El material propagado puede ser fuente de germoplasma para la recuperación y reforzamiento de las poblaciones naturales así como una alternativa de producción para las comunidades locales debido a la demanda actual de corteza de la zona de origen para la elaboración de agua tónica. ABSTRACT Cinchona officinalis (Rubiaceae) is endemic to the Loja Valley, located in the southern area of Ecuador. The importance of this plant as medical and ecological resource is so great that it has been designated as the national flower and is an icon of the southern region for its contribution to the world pharmacopoeia. Between XVII-XIX centuries its population suffered great reduction due to massive harvesting of the bark to cure malaria. Although extraction activity generated large revenues to the Spanish Crown and the southern region of Ecuador, this was not ecologically sustainable, causing the disappearance of the species in many areas of the province, because during that time alternatives to prevent extinction and recover natural populations were not taken in account. Currently the extraction and consumption of bark in the area of origin is almost absent, but this species faces new threats. Deforestation due to infrastructure development, the practice of farming and ranching, and the effects of climate change had led to the fragmentation of ecosystems during the recent years. Most of the forests of southern Ecuador have become isolated patches, including those where C. officinalis is diffused. The lack of suitable habitat is today the main threat for the species. The species has a high capacity for regeneration and produces seeds throughout the year, but the germination rate is low and the growth is slow. In addition, the species requires the association with other plant species to develop. All these factors had limited its distribution to small isolated patches. The natural recovery of populations is essential to face this problem. Several studies and previous efforts had been made at local level: i. Identification of current and potential distribution; ii. Phenology determination. iii. Environmental education programs, iv. Molecular analisis to determine the genetic diversity. v. Testing of vegetative propagation; and other actions of cultural nature. Despite these efforts, the state of conservation and management of natural populations has not improved significantly. Implementation of integrated in situ and ex situ conservation strategies for the recovery and permanence of long-term natural populations is still needed. This work aims to provide alternatives for in vitro culture of tissue of Cinchona officinalis focused on mass propagation from seeds, genetic fidelity analysis and tissue conservation alternatives. The specific aims are: i. Analyze the process of germination and proliferation in vitro. ii. To evaluate the genetic stability of the explants cultured in vitro by ISSR markers. iii. Establish protocols for in vitro conservation by limiting growth and cryopreservation of nodal segments and buds. The most significant results of this research were: i. The development of efficient protocols to improve germination rates and proliferation of buds in explants cultured in vitro. To study the effect of phenols on germination, the total phenolic content and percentage germination was measured in C. officinalis and in a control species, C. pubescens, for comparison. The content of phenolic compounds in C. officinalis seeds is higher than in C. pubescens. These phenols can be removed with hydrogen peroxide or water washes to stimulate germination. To analyze the regeneration, we used nodal explants from seedlings germinated in vitro on Gamborg medium (1968) supplemented with different combinations of growth regulators (auxins and cytokinins) to induce proliferation. The formation of new shoots and calluses was observed within a period of 45 days in most combinations of growth regulators. The highest percentage of shoot proliferation, callus formation and adventitious buds were obtained in B5 medium supplemented with 5.0 mg/l 6-benzyl-aminopurine and 3.0 mg/l indole-3-butyric acid. ii. Evaluating genetic fidelity explants obtained with various combinations of plant growth regulators and different subcultures. The genetic fidelity was analyzed in tissues obtained by the two regenerative pathways: direct sprouting and shoot regeneration from callus. This analysis was performed by PCR amplification of the sequences located between microsatellite-ISSR (Inter Simple Sequence Repeat). Among a total of 13 ISSR markers analyzed, 6 were polymorphic. The highest percentage of somaclonal variation was induced in the presence of 1.0 mg/l 2,4-D combined with 0.2 mg/l Kin with 1.8% in the second round of regeneration, and increased to 3.6% in the third round. The presence of 2,4-D induced genetic variation in all the combinations of growth regulators. Meanwhile genetic fidelity remained systems propagation through direct shoot formation from meristems preformed. iii. Establishing conservation protocols in vitro and cryoconservation of nodal segments and buds. For medium-term conservation (limited growth) nodal segments were cultured in MS and B5 media at three concentrations (25, 50 and 100%); we tested B5 medium with different concentrations of osmotic agents such as mannitol, sorbitol and sucrose (2, 4 and 8%); cultures were maintained for 12 months with regular subculturing. To establish protocols for cryoconservation (cessation of metabolism) different methods of encapsulation-dehydration and vitrification were applied to axillary and apical buds. The effectiveness of the used protocols is determined based on the survival, growth and regeneration success. The results show that these tissues can be maintained in storage for 12 months, using B5 medium plus mannitol between 2 and 8%. The cryoconservation protocol with highest percentage of recovery was obtained by contral treatment, followed by freezing in NL with encapsulation-dehydration method. This work provides alternatives for the propagation in vitro of C. officinalis, starting from plant material with high genetic diversity. The obtained material represents a source of germplasm to support the recovery and strengthening of natural populations as well as a creation of alternative sources for local communities due to the current demand of bark for the preparation of tonic water.

Physical properties of peanuts related to harvesting mecanization.

This study on the mechanical properties of peanuts intended complete information on the suitability to mechanize the varieties that had been of interest in the production tests made in Valencia (Spain). The results obtained established the basis for a breeding program.

Testing equipment for the improvement of mechanical devices to minimize damage to fruit in commercial packing lines.

Damages -reduced in fruit packing lines is a major cause of grace reduction and quality loos in fresh marks: fruit. Fruit must be treated gently during in sir handling to improve their qualityin order to get a good price in a competitive market. The correct post-hardvest handling in fruit packing lines is a prerequisite to cut down the heavy post-harvest losses. Fruit packing lines must be evaluated, studying their design, the impacts applied to the fruits, the characteristics of the materials, etc. This study establishes the possibility of carrying out modifications and tests in a packing line during a long period of time. For this purpose, an experimental fruit packing line has been designed and located in the Agricultural Engineering Department of the Polythecnic University of Madrid with the aim of improving mechanical devices and fruit handling conditions to minimize damage to fruit. The experimental line consists of several transporting belts, one rollers transporter, one sizer, one elevator, one singularizer, and three trays to receive the calibrated fruit. The line has a length of 6.15 m and a width cf 1.9 m. Movement of the different components is regulated by electric motors with variable velocity electronically controlled. The height of the transfer points is variable and can be easily modified. The experimental line has been calibrated using two instrumented spheres IS 100 (8.8 cm Ø and6.2cm Ø). Average acceleration values obtained in all the transfers of the experimental line lay under 80 g's, although there is big variation for some of them being some values above 100 g's.

Tuning the current ratio of a CPV system to maximize the energy harvesting in a particular location

A method based on experimental data is proposed to optimize the energy harvesting of a silicone-on-glass Fresnel-lens based CPV system. It takes into account the spectral variations along the year in a particular location as well as the thermal and spectral sensitivities of the optics and solar cell. In addition, different alternatives to tune the top/middle subcells current ratio in a CPV module are analyzed and their capacity to maximize the annually produced energy is quantified.

Experimental and numerical study of cracking of concrete due to reinforcement corrosion

La corrosión del acero es una de las patologías más importantes que afectan a las estructuras de hormigón armado que están expuestas a ambientes marinos o al ataque de sales fundentes. Cuando se produce corrosión, se genera una capa de óxido alrededor de la superficie de las armaduras, que ocupa un volumen mayor que el acero inicial; como consecuencia, el óxido ejerce presiones internas en el hormigón circundante, que lleva a la fisuración y, ocasionalmente, al desprendimiento del recubrimiento de hormigón. Durante los últimos años, numerosos estudios han contribuido a ampliar el conocimiento sobre el proceso de fisuración; sin embargo, aún existen muchas incertidumbres respecto al comportamiento mecánico de la capa de óxido, que es fundamental para predecir la fisuración. Por ello, en esta tesis se ha desarrollado y aplicado una metodología, para mejorar el conocimiento respecto al comportamiento del sistema acero-óxido-hormigón, combinando experimentos y simulaciones numéricas. Se han realizado ensayos de corrosión acelerada en condiciones de laboratorio, utilizando la técnica de corriente impresa. Con el objetivo de obtener información cercana a la capa de acero, como muestras se seleccionaron prismas de hormigón con un tubo de acero liso como armadura, que se diseñaron para conseguir la formación de una única fisura principal en el recubrimiento. Durante los ensayos, las muestras se equiparon con instrumentos especialmente diseñados para medir la variación de diámetro y volumen interior de los tubos, y se midió la apertura de la fisura principal utilizando un extensómetro comercial, adaptado a la geometría de las muestras. Las condiciones de contorno se diseñaron cuidadosamente para que los campos de corriente y deformación fuesen planos durante los ensayos, resultando en corrosión uniforme a lo largo del tubo, para poder reproducir los ensayos en simulaciones numéricas. Se ensayaron series con varias densidades de corriente y varias profundidades de corrosión. De manera complementaria, el comportamiento en fractura del hormigón se caracterizó en ensayos independientes, y se midió la pérdida gravimétrica de los tubos siguiendo procedimientos estándar. En todos los ensayos, la fisura principal creció muy despacio durante las primeras micras de profundidad de corrosión, pero después de una cierta profundidad crítica, la fisura se desarrolló completamente, con un aumento rápido de su apertura; la densidad de corriente influye en la profundidad de corrosión crítica. Las variaciones de diámetro interior y de volumen interior de los tubos mostraron tendencias diferentes entre sí, lo que indica que la deformación del tubo no fue uniforme. Después de la corrosión acelerada, las muestras se cortaron en rebanadas, que se utilizaron en ensayos post-corrosión. El patrón de fisuración se estudió a lo largo del tubo, en rebanadas que se impregnaron en vacío con resina y fluoresceína para mejorar la visibilidad de las fisuras bajo luz ultravioleta, y se estudió la presencia de óxido dentro de las grietas. En todas las muestras, se formó una fisura principal en el recubrimiento, infiltrada con óxido, y varias fisuras secundarias finas alrededor del tubo; el número de fisuras varió con la profundidad de corrosión de las muestras. Para muestras con la misma corrosión, el número de fisuras y su posición fue diferente entre muestras y entre secciones de una misma muestra, debido a la heterogeneidad del hormigón. Finalmente, se investigó la adherencia entre el acero y el hormigón, utilizando un dispositivo diseñado para empujar el tubo en el hormigón. Las curvas de tensión frente a desplazamiento del tubo presentaron un pico marcado, seguido de un descenso constante; la profundidad de corrosión y la apertura de fisura de las muestras influyeron notablemente en la tensión residual del ensayo. Para simular la fisuración del hormigón causada por la corrosión de las armaduras, se programó un modelo numérico. Éste combina elementos finitos con fisura embebida adaptable que reproducen la fractura del hormigón conforme al modelo de fisura cohesiva estándar, y elementos de interfaz llamados elementos junta expansiva, que se programaron específicamente para reproducir la expansión volumétrica del óxido y que incorporan su comportamiento mecánico. En el elemento junta expansiva se implementó un fenómeno de despegue, concretamente de deslizamiento y separación, que resultó fundamental para obtener localización de fisuras adecuada, y que se consiguió con una fuerte reducción de la rigidez tangencial y la rigidez en tracción del óxido. Con este modelo, se realizaron simulaciones de los ensayos, utilizando modelos bidimensionales de las muestras con elementos finitos. Como datos para el comportamiento en fractura del hormigón, se utilizaron las propiedades determinadas en experimentos. Para el óxido, inicialmente se supuso un comportamiento fluido, con deslizamiento y separación casi perfectos. Después, se realizó un ajuste de los parámetros del elemento junta expansiva para reproducir los resultados experimentales. Se observó que variaciones en la rigidez normal del óxido apenas afectaban a los resultados, y que los demás parámetros apenas afectaban a la apertura de fisura; sin embargo, la deformación del tubo resultó ser muy sensible a variaciones en los parámetros del óxido, debido a la flexibilidad de la pared de los tubos, lo que resultó fundamental para determinar indirectamente los valores de los parámetros constitutivos del óxido. Finalmente, se realizaron simulaciones definitivas de los ensayos. El modelo reprodujo la profundidad de corrosión crítica y el comportamiento final de las curvas experimentales; se comprobó que la variación de diámetro interior de los tubos está fuertemente influenciada por su posición relativa respecto a la fisura principal, en concordancia con los resultados experimentales. De la comparación de los resultados experimentales y numéricos, se pudo extraer información sobre las propiedades del óxido que de otra manera no habría podido obtenerse. Corrosion of steel is one of the main pathologies affecting reinforced concrete structures exposed to marine environments or to molten salt. When corrosion occurs, an oxide layer develops around the reinforcement surface, which occupies a greater volume than the initial steel; thus, it induces internal pressure on the surrounding concrete that leads to cracking and, eventually, to full-spalling of the concrete cover. During the last years much effort has been devoted to understand the process of cracking; however, there is still a lack of knowledge regarding the mechanical behavior of the oxide layer, which is essential in the prediction of cracking. Thus, a methodology has been developed and applied in this thesis to gain further understanding of the behavior of the steel-oxide-concrete system, combining experiments and numerical simulations. Accelerated corrosion tests were carried out in laboratory conditions, using the impressed current technique. To get experimental information close to the oxide layer, concrete prisms with a smooth steel tube as reinforcement were selected as specimens, which were designed to get a single main crack across the cover. During the tests, the specimens were equipped with instruments that were specially designed to measure the variation of inner diameter and volume of the tubes, and the width of the main crack was recorded using a commercial extensometer that was adapted to the geometry of the specimens. The boundary conditions were carefully designed so that plane current and strain fields were expected during the tests, resulting in nearly uniform corrosion along the length of the tube, so that the tests could be reproduced in numerical simulations. Series of tests were carried out with various current densities and corrosion depths. Complementarily, the fracture behavior of concrete was characterized in independent tests, and the gravimetric loss of the steel tubes was determined by standard means. In all the tests, the main crack grew very slowly during the first microns of corrosion depth, but after a critical corrosion depth it fully developed and opened faster; the current density influenced the critical corrosion depth. The variation of inner diameter and inner volume of the tubes had different trends, which indicates that the deformation of the tube was not uniform. After accelerated corrosion, the specimens were cut into slices, which were used in post-corrosion tests. The pattern of cracking along the reinforcement was investigated in slices that were impregnated under vacuum with resin containing fluorescein to enhance the visibility of cracks under ultraviolet lightening and a study was carried out to assess the presence of oxide into the cracks. In all the specimens, a main crack developed through the concrete cover, which was infiltrated with oxide, and several thin secondary cracks around the reinforcement; the number of cracks diminished with the corrosion depth of the specimen. For specimens with the same corrosion, the number of cracks and their position varied from one specimen to another and between cross-sections of a given specimen, due to the heterogeneity of concrete. Finally, the bond between the steel and the concrete was investigated, using a device designed to push the tubes of steel in the concrete. The curves of stress versus displacement of the tube presented a marked peak, followed by a steady descent, with notably influence of the corrosion depth and the crack width on the residual stress. To simulate cracking of concrete due to corrosion of the reinforcement, a numerical model was implemented. It combines finite elements with an embedded adaptable crack that reproduces cracking of concrete according to the basic cohesive model, and interface elements so-called expansive joint elements, which were specially designed to reproduce the volumetric expansion of oxide and incorporate its mechanical behavior. In the expansive joint element, a debonding effect was implemented consisting of sliding and separation, which was proved to be essential to achieve proper localization of cracks, and was achieved by strongly reducing the shear and the tensile stiffnesses of the oxide. With that model, simulations of the accelerated corrosion tests were carried out on 2- dimensional finite element models of the specimens. For the fracture behavior of concrete, the properties experimentally determined were used as input. For the oxide, initially a fluidlike behavior was assumed with nearly perfect sliding and separation; then the parameters of the expansive joint element were modified to fit the experimental results. Changes in the bulk modulus of the oxide barely affected the results and changes in the remaining parameters had a moderate effect on the predicted crack width; however, the deformation of the tube was very sensitive to variations in the parameters of oxide, due to the flexibility of the tube wall, which was crucial for indirect determination of the constitutive parameters of oxide. Finally, definitive simulations of the tests were carried out. The model reproduced the critical corrosion depth and the final behavior of the experimental curves; it was assessed that the variation of inner diameter of the tubes is highly influenced by its relative position with respect to the main crack, in accordance with the experimental observations. From the comparison of the experimental and numerical results, some properties of the mechanical behavior of the oxide were disclosed that otherwise could not have been measured.

Calculation of dielectrophoretic potential generated under illumination patterns on x- and z-cut LiNbO3 : application to photovoltaic particle trapping

The dielectrophoretic potential generated near the surface of a z-cut LiNbO3 by photovoltaic charge transport has been calculated for first time. The procedure and results are compared with the ones corresponding to x-cut. Diferences in the position, sharpness and time evolution are reported, and their implication on particle trapping are discussed.

A resistance emulation approach to optimize the wave energy harvesting for a direct drive point absorber

In general, a major challenge for the exploitation of renewable energies is to improve their efficiency. In electricity generation from the energy of ocean waves, not unlike other technologies, the converter must be optimized to make the energy harvesting economically feasible. This paper proposes a passive tuning control strategy of a point absorber in which the power captured is maximized by controlling the electromagnetic force of the generator with a resistance emulation approach. The proposed strategy consists of mapping the optimal values for regular waves and applying them to irregular waves. This strategy is tested in a wave energy converter in which the generator is connected to a boost rectifier converter whose controller is designed to emulate a resistance. The power electronics system implemented is validated by comparing its performance with the case in which the generator is directly connected to a resistive load. The simulation results show the effectiveness of the proposed strategy as the maximum captured power is concentrated around the optimal values previously calculated and with the same behavior for both excitations.