Influence of delay time on regularity estimation for voice pathology detection

The employment of nonlinear analysis techniques for automatic voice pathology detection systems has gained popularity due to the ability of such techniques for dealing with the underlying nonlinear phenomena. On this respect, characterization using nonlinear analysis typically employs the classical Correlation Dimension and the largest Lyapunov Exponent, as well as some regularity quantifiers computing the system predictability. Mostly, regularity features highly depend on a correct choosing of some parameters. One of those, the delay time �, is usually fixed to be 1. Nonetheless, it has been stated that a unity � can not avoid linear correlation of the time series and hence, may not correctly capture system nonlinearities. Therefore, present work studies the influence of the � parameter on the estimation of regularity features. Three � estimations are considered: the baseline value 1; a � based on the Average Automutual Information criterion; and � chosen from the embedding window. Testing results obtained for pathological voice suggest that an improved accuracy might be obtained by using a � value different from 1, as it accounts for the underlying nonlinearities of the voice signal.

Validación de Herramientas Metodológicas de Estudios Sociales y Psicoacústicos de Ruido

El ruido es un contaminante que cada vez va tomando más importancia por ser un tipo de contaminación propio de las sociedades modernas. Su estudio en tanto su origen y efectos en la población, ha sido objeto de numerosas líneas de investigación en el mundo, siendo una de las herramientas más utilizadas las encuestas de percepción de molestias realizadas en numerosos países y de variados diseños metodológicos. Sin embargo, la profusa información recolectada por muchos años y por distintos países por medio de estas herramientas no permite obtener datos relacionados entre ellos para estudiar las distintas condiciones de exposición a distintos tipos de fuentes de ruido, dado que responden a diseños de instrumentos de recolección de datos (encuestas) distintos y, aún más, a escalas de mediciones distintas. Un esfuerzo por generar datos y estudios que puedan ser relacionados para contribuir a mayor conocimiento del ruido y sus efectos en la salud de la población, es la iniciativa desarrollada por el ICBEN (International Commission of Biological Effects on Noise) que desde el año 1997 un grupo de investigadores se ha propuesto generar estudios e investigaciones bajo una metodología que permita comparar los diferentes estudios que se realicen y que sus conclusiones permitan ser utilizadas por el resto y así generar nuevos conocimientos y validar dichos resultados. Uno de los problemas que en la actualidad se tiene es que las encuestas que se utilizan en distintos países, e incluso en ellos mismos, no sólo incorporan preguntas de diversas modalidades y estilos, sino que además para las respuestas que entregan los encuestados se utilizan una variedad de métodos y escalas que no permiten ser extrapolados o comparados con otros estudios. Dado que las escalas que algunos estudios utilizan, para conocer el grado de molestia que presenta la población, sin verbales, las líneas de investigación y recomendaciones internacionales sugieren que cada país desarrolle sus propias escalas y que no se remitan sólo a traducir aquellas utilizadas en otros idiomas. Esto debido que cada palabra que se utilice en las escalas encierra un concepto metrológico, esto es, que las personas le asignan un valor específico de intensidad en el continuo de grados de molestia, por lo que deben ser obtenidas para cada población bajo estudio. Esta investigación, siguiendo las recomendaciones internacionales, ha obtenido una escala verbal para ser utilizada en encuestas de percepción subjetiva de molestias por ruido en Chile, para una población de entre 15 a 65 años de edad. Se ha podido desarrollar un test para obtener dicha escala siguiendo la metodología internacional, lo que ha permitido además discutir y analizar su utilización en futuras investigaciones. Del mismo modo, se ha podido analizar la equivalencia que tiene con otras escalas que podrían ser obtenidas con esta misma metodología, así como la escala que la recomendación internacional ISO propone para el idioma español. Los resultados obtenidos permiten comprobar la necesidad de que cada país hispanoparlante desarrolle sus propias escalas lo que podría explicar, entre otros aspectos, del por qué la norma internacional aún no tiene características de oficial a falta de mayor consenso en la comunidad científica, por lo que los datos aportados en esta investigación permitirán profundizar estos y otros aspectos a los investigadores en esta materia. ABSTRACT Noise is considered as a pollutant that it is growing in importance because it has become recognized as a major annoyance in modern societies. The study of its origin and effects on populations has been the objective of numerous lines of investigation all over the world. The annoyance questionnaire is a tool that is frequently utilized in numerous countries using a variety of design methods. Nevertheless, the quantity of information collected over several years in different countries using these tools has not allowed an interrelated correlation of data because the data indicates that the different study tools designed to collect data have used varying collection techniques and measurement scales that define the exposure to different types and sources of noise pollution. In an effort to generate data and studies then can be combined to better the understanding of noise and its effects on public health, an initiative that was developed by ICBEN (International Commission of Biological Effects on Noise) was proposed in 1997 and is designed to generate and investigate studies under methodologies that allow the comparisons of different studies already undertaken and the coordination of their conclusions. These investigative tools can be used by other investigators who will be able to generate additional information and validates results. One of the currently existing problems is that the questionnaires utilized by different countries and within the same countries not only use questions based on different models and styles, but also the answers given by the subjects being interviewed are interpreted using different methods and measurement scales which do not permit direct comparison of relationship with other studies. Given the measurement tools used to obtain the reported levels of annoyance that the population experiences (without verbal response) the lines of investigation and international recommendations are that each country develops its own scale that does not rely only on verbal responses in the corresponding language. This is because each word utilized in the measurement scale has a numeric concept with which interview subjects will assign a specific numeric intensity from the continuum of levels of annoyance and must be obtained for each population under study. This investigation, which follows international recommendations, has obtained a verbal scale to be utilized in subjective perception questionnaires of noise annoyance in Chile, for a subject population of subjects between 15 and 65 years of age. It has been able to develop a test to obtain said measurement scale following the international methodology guidelines which has permitted discussion and analysis of their use by other investigators. By the same token, it has been possible to analyze the equivalency that exists between other scales that could be obtained with the same methodology including the scale as recommended by international ISO for Spanish Language. The results obtained allows proof of the necessity that each Spanish Speaking Country develop their own measurement scales which could explain, the reason why the international norm still does not have the official characteristics because of a failure of a majority consensus in the scientific community, by which the data contribution from this investigation will allow the investigator to deepen these and other aspects of the subject.

In situ control of the GE(100)surface domain structure for III-V multijunction solar cells

Vicinal Ge(100) is the common substrate for state of the art multi-junction solar cells grown by metal-organic vapor phase epitaxy (MOVPE). While triple junction solar cells based on Ge(100) present efficiencies mayor que 40%, little is known about the microscopic III-V/Ge(100) nucleation and its interface formation. A suitable Ge(100) surface preparation prior to heteroepitaxy is crucial to achieve low defect densities in the III-V epilayers. Formation of single domain surfaces with double layer steps is required to avoid anti-phase domains in the III-V films. The step formation processes in MOVPE environment strongly depends on the major process parameters such as substrate temperature, H2 partial pressure, group V precursors [1], and reactor conditions. Detailed investigation of these processes on the Ge(100) surface by ultrahigh vacuum (UHV) based standard surface science tools are complicated due to the presence of H2 process gas. However, in situ surface characterization by reflection anisotropy spectroscopy (RAS) allowed us to study the MOVPE preparation of Ge(100) surfaces directly in dependence on the relevant process parameters [2, 3, 4]. A contamination free MOVPE to UHV transfer system [5] enabled correlation of the RA spectra to results from UHV-based surface science tools. In this paper, we established the characteristic RA spectra of vicinal Ge(100) surfaces terminated with monohydrides, arsenic and phosphorous. RAS enabled in situ control of oxide removal, H2 interaction and domain formation during MOVPE preparation.

Analysis of pixel-mapping rounding on geometric distortion as a prediction for view synthesis distortion

We analyze the performance of the geometric distortion, incurred when coding depth maps in 3D Video, as an estimator of the distortion of synthesized views. Our analysis is motivated by the need of reducing the computational complexity required for the computation of synthesis distortion in 3D video encoders. We propose several geometric distortion models that capture (i) the geometric distortion caused by the depth coding error, and (ii) the pixel-mapping precision in view synthesis. Our analysis starts with the evaluation of the correlation of geometric distortion values obtained with these models and the actual distortion on synthesized views. Then, the different geometric distortion models are employed in the rate-distortion optimization cycle of depth map coding, in order to assess the results obtained by the correlation analysis. Results show that one of the geometric distortion models is performing consistently better than the other models in all tests. Therefore, it can be used as a reasonable estimator of the synthesis distortion in low complexity depth encoders.

Use of Headed Reinforcement Bars in Contruction. A Theoretical Approach to Determine the Dimensions of Anchorage Plates and Experimental Tests on Knee Joints Subjected to a Closing Moment

In order to reduce costs and time while improving quality, durability and sustainability in structural concrete constructions, a widely used material nowadays, special care must be taken in some crucial phases of the project and execution, including the structure design and calculation, the dosage, dumping and curing of concrete: another important aspect is the proper design and execution of assembly plans and construction details. The framework, a name designating the whole reinforcement bars cage already assembled as shown in the drawings, can be made up of several components and implies higher or lower industrialization degree. The framework costs constitute about one third of the price per cubic meter placed in concrete works. The best solutions from all points of view are clearly those involving an easier processing to achieve the same goal, and consequently carrying a high degree of industrialization, meaning quality and safety in the work. This thesis aims to provide an indepth analysis of a relatively new type of anchoring by plate known as headed reinforcement bars, which can potentially replace standard or L-shaped hooks, improving the cleaning of construction details and enabling a faster, more flexible, and therefore a more economical assembly. A literature review on the topic and an overview of typical applications is provided, followed by some examples of specific applications in real projects. Since a strict theoretical formulation used to provide the design plate dimensions has not yet been put forward, an equation is proposed for the side-face blowout strength of the anchorage, based on the capacity of concrete to carry concentrated loads in cases in which no transverse reinforcement is provided. The correlation of the calculated ultimate load with experimental results available in the literature is given. Besides, the proposed formulation can be expanded to cases in which a certain development length is available: using a software for nonlinear finite element analysis oriented to the study of reinforced concrete, numerical tests on the bond-bearing interaction are performed. The thesis ends with a testing of eight corner joints subjected to a closing moment, held in the Structures Laboratory of the Polytechnic University of Madrid, aiming to check whether the design of such plates as stated is adequate for these elements and whether an element with plate-anchored reinforcement is equivalent to one with a traditional construction detail.

Is the polarity of content producers strongly influenced by the results of the event?

This paper presents an approach to compare two types of data, subjective data (Polarity of Pan American Games 2011 event by country) and objective data (the number of medals won by each participating country), based on the Pearson corre- lation. When dealing with events described by people, knowledge acquisition is difficult because their structure is heterogeneous and subjective. A first step towards knowing the polarity of the information provided by people consists in automatically classifying the posts into clusters according to their polarity. The authors carried out a set of experiments using a corpus that consists of 5600 posts extracted from 168 Internet resources related to a specific event: the 2011 Pan American games. The approach is based on four components: a crawler, a filter, a synthesizer and a polarity analyzer. The PanAmerican approach automatically classifies the polarity of the event into clusters with the following results: 588 positive, 336 neutral, and 76 negative. Our work found out that the polarity of the content produced was strongly influenced by the results of the event with a correlation of .74. Thus, it is possible to conclude that the polarity of content is strongly affected by the results of the event. Finally, the accuracy of the PanAmerican approach is: .87, .90, and .80 according to the precision of the three classes of polarity evaluated.

Non contact inspection of the fatigue damage state of carbon fiber reinforced polymer by optical surface roughness measurements

This work presents the evaluation of a new non-contact technique to assess the fatigue damage state of CFRP structures by measuring surface roughness parameters. Surface roughness and stiffness degradation have been measured in CFRP coupons cycled with constant amplitude loads, and a Pearson?s correlation of 0.79 was obtained between both variables. Results suggest that changes on the surface roughness measured in strategic zones of components made of the evaluated CFRP, could be indicative of the level of damage due to fatigue loads. This methodology could be useful for other FRP due to similarities in the fatigue damage process.

Optical sensing of the fatigue damage state of CFRP under realistic aeronautical load sequences

We present an optical sensing methodology to estimate the fatigue damage state of structures made of carbon fiber reinforced polymer (CFRP), by measuring variations on the surface roughness. Variable amplitude loads (VAL), which represent realistic loads during aeronautical missions of fighter aircraft (FALSTAFF) have been applied to coupons until failure. Stiffness degradation and surface roughness variations have been measured during the life of the coupons obtaining a Pearson correlation of 0.75 between both variables. The data were compared with a previous study for Constant Amplitude Load (CAL) obtaining similar results. Conclusions suggest that the surface roughness measured in strategic zones is a useful technique for structural health monitoring of CFRP structures, and that it is independent of the type of load applied. Surface roughness can be measured in the field by optical techniques such as speckle, confocal perfilometers and interferometry, among others.