Validación de Herramientas Metodológicas de Estudios Sociales y Psicoacústicos de Ruido

El ruido es un contaminante que cada vez va tomando más importancia por ser un tipo de contaminación propio de las sociedades modernas. Su estudio en tanto su origen y efectos en la población, ha sido objeto de numerosas líneas de investigación en el mundo, siendo una de las herramientas más utilizadas las encuestas de percepción de molestias realizadas en numerosos países y de variados diseños metodológicos. Sin embargo, la profusa información recolectada por muchos años y por distintos países por medio de estas herramientas no permite obtener datos relacionados entre ellos para estudiar las distintas condiciones de exposición a distintos tipos de fuentes de ruido, dado que responden a diseños de instrumentos de recolección de datos (encuestas) distintos y, aún más, a escalas de mediciones distintas. Un esfuerzo por generar datos y estudios que puedan ser relacionados para contribuir a mayor conocimiento del ruido y sus efectos en la salud de la población, es la iniciativa desarrollada por el ICBEN (International Commission of Biological Effects on Noise) que desde el año 1997 un grupo de investigadores se ha propuesto generar estudios e investigaciones bajo una metodología que permita comparar los diferentes estudios que se realicen y que sus conclusiones permitan ser utilizadas por el resto y así generar nuevos conocimientos y validar dichos resultados. Uno de los problemas que en la actualidad se tiene es que las encuestas que se utilizan en distintos países, e incluso en ellos mismos, no sólo incorporan preguntas de diversas modalidades y estilos, sino que además para las respuestas que entregan los encuestados se utilizan una variedad de métodos y escalas que no permiten ser extrapolados o comparados con otros estudios. Dado que las escalas que algunos estudios utilizan, para conocer el grado de molestia que presenta la población, sin verbales, las líneas de investigación y recomendaciones internacionales sugieren que cada país desarrolle sus propias escalas y que no se remitan sólo a traducir aquellas utilizadas en otros idiomas. Esto debido que cada palabra que se utilice en las escalas encierra un concepto metrológico, esto es, que las personas le asignan un valor específico de intensidad en el continuo de grados de molestia, por lo que deben ser obtenidas para cada población bajo estudio. Esta investigación, siguiendo las recomendaciones internacionales, ha obtenido una escala verbal para ser utilizada en encuestas de percepción subjetiva de molestias por ruido en Chile, para una población de entre 15 a 65 años de edad. Se ha podido desarrollar un test para obtener dicha escala siguiendo la metodología internacional, lo que ha permitido además discutir y analizar su utilización en futuras investigaciones. Del mismo modo, se ha podido analizar la equivalencia que tiene con otras escalas que podrían ser obtenidas con esta misma metodología, así como la escala que la recomendación internacional ISO propone para el idioma español. Los resultados obtenidos permiten comprobar la necesidad de que cada país hispanoparlante desarrolle sus propias escalas lo que podría explicar, entre otros aspectos, del por qué la norma internacional aún no tiene características de oficial a falta de mayor consenso en la comunidad científica, por lo que los datos aportados en esta investigación permitirán profundizar estos y otros aspectos a los investigadores en esta materia. ABSTRACT Noise is considered as a pollutant that it is growing in importance because it has become recognized as a major annoyance in modern societies. The study of its origin and effects on populations has been the objective of numerous lines of investigation all over the world. The annoyance questionnaire is a tool that is frequently utilized in numerous countries using a variety of design methods. Nevertheless, the quantity of information collected over several years in different countries using these tools has not allowed an interrelated correlation of data because the data indicates that the different study tools designed to collect data have used varying collection techniques and measurement scales that define the exposure to different types and sources of noise pollution. In an effort to generate data and studies then can be combined to better the understanding of noise and its effects on public health, an initiative that was developed by ICBEN (International Commission of Biological Effects on Noise) was proposed in 1997 and is designed to generate and investigate studies under methodologies that allow the comparisons of different studies already undertaken and the coordination of their conclusions. These investigative tools can be used by other investigators who will be able to generate additional information and validates results. One of the currently existing problems is that the questionnaires utilized by different countries and within the same countries not only use questions based on different models and styles, but also the answers given by the subjects being interviewed are interpreted using different methods and measurement scales which do not permit direct comparison of relationship with other studies. Given the measurement tools used to obtain the reported levels of annoyance that the population experiences (without verbal response) the lines of investigation and international recommendations are that each country develops its own scale that does not rely only on verbal responses in the corresponding language. This is because each word utilized in the measurement scale has a numeric concept with which interview subjects will assign a specific numeric intensity from the continuum of levels of annoyance and must be obtained for each population under study. This investigation, which follows international recommendations, has obtained a verbal scale to be utilized in subjective perception questionnaires of noise annoyance in Chile, for a subject population of subjects between 15 and 65 years of age. It has been able to develop a test to obtain said measurement scale following the international methodology guidelines which has permitted discussion and analysis of their use by other investigators. By the same token, it has been possible to analyze the equivalency that exists between other scales that could be obtained with the same methodology including the scale as recommended by international ISO for Spanish Language. The results obtained allows proof of the necessity that each Spanish Speaking Country develop their own measurement scales which could explain, the reason why the international norm still does not have the official characteristics because of a failure of a majority consensus in the scientific community, by which the data contribution from this investigation will allow the investigator to deepen these and other aspects of the subject.

Modelo de gestión de la responsabilidad social para las empresas del sector petrolero venezolano

El presente trabajo tiene como objetivo diseñar un modelo de gestión de responsabilidad social sustentado en estándares internacionales para las empresas del sector petrolero venezolano. Esta investigación no se suscribe a un modelo epistémico en particular, como forma parcializada de ver la realidad. Por el contrario, se realizó un abordaje holístico de la investigación, entendiendo el evento de estudio, la gestión de la responsabilidad social, como un evento integrado por distintas visiones de la relación empresa – sociedad. La holística se refiere a una tendencia que permite entender la realidad desde el punto de vista de las múltiples interacciones que la caracterizan. Corresponde a una actitud integradora como también a una teoría explicativa que se orienta hacia una comprensión contextual de los procesos, de los protagonistas y de los eventos. Desde la concepción holística se determinó que la investigación es de tipo proyectiva. Este tipo de investigación propone soluciones a una situación determinada a partir de un proceso de indagación. Implica describir, comparar, explicar y proponer alternativas de cambios, lo que da lugar a los estadios de investigación. En cuanto al diseño de la investigación, aplicando el ciclo holístico, se tiene un diseño que es univariable, transeccional contemporáneo y de fuente mixta. Univariable, porque se enfoca en la gestión de responsabilidad social. Transeccional contemporáneo, porque el evento se estudia en la actualidad y se realiza una sola medición de los datos. De fuente mixta, porque en los estadios descriptivo y explicativo se aplica un diseño de campo, al recolectar los datos directamente en las empresas objeto de estudio, mientras que para los estadios analítico y comparativo se aplica un diseño documental. Las técnicas de recolección de la información estuvieron constituidas por fuentes primarias provenientes de la observación directa, la revisión documental y la aplicación de un cuestionario estructurado tipo escala Likert. El análisis de los datos comprendió el análisis estadístico descriptivo, la estimación de la fiabilidad y el análisis de coeficientes de correlación y análisis de ruta, a través del software estadístico SPSS v.19.0 y AMOS v.20. En los estadios descriptivo y explicativo se estudió la gestión de la responsabilidad social en las empresas del sector petrolero. Los resultados indicaron que las empresas del sector petrolero actúan bajo los lineamientos trazados en el Plan de Desarrollo Nacional y de acuerdo con las políticas, directrices, planes y estrategias para el sector de los hidrocarburos, dictadas por el Ministerio de Energía y Petróleo. También incluyen el compromiso social y la política ambiental en su filosofía de gestión. Tienen en su estructura organizacional una gerencia de desarrollo social que gestiona la responsabilidad social. Las actividades de inversión social se presentan poco estructuradas y en ocasiones se improvisan ya que atienden a los lineamientos políticos del Estado y no a una política interna de sostenibilidad del negocio petrolero. En cuanto a la integralidad de la gestión las empresas no consideran la responsabilidad social en todas las áreas, por lo que deben ampliar su concepción de una gestión responsable, redefiniendo estructuras, estrategias y procesos, con una orientación hacia una gestión sustentable. En cuanto a los estadios analítico y comparativo aplicados al estudio de las guías y estándares internacionales de responsabilidad social, se determinó que en términos de la integralidad de la gestión las iniciativas que destacan son: en cuanto a los principios, las directrices para empresas multinacionales según la OCDE y el Libro Verde de la Unión Europea. En relación con las guías de implementación y control, el Global Reporting Initiative y la norma ISO 26000. Y en cuanto a los sistemas de gestión el Sistema de Gestión Ética y Responsable (SGE 21) y el Sistema de Gestión de Responsabilidad Social IQNET SR10. Finalmente se diseñó una estructura para la gestión integral de responsabilidad social basada en los estándares internacionales y en el concepto de desarrollo sostenible. Por tanto abarca el desarrollo social, el equilibrio ecológico y el crecimiento económico, lo que permite un desarrollo sinérgico. La originalidad del enfoque consistió en la comprensión de la investigación desde una concepción holística, que permitió la integración de las teorías que tratan el tema de la responsabilidad social a través de un abordaje estructurado. ABSTRACT The present research aims to design a model of social responsibility management underpinned by international standards for companies in the Venezuelan oil sector. This research is not framed in a particular epistemic model as a biased way of looking at reality. Instead, a holistic approach to the research was conducted, understanding the event under study, the management of social responsibility as an event composed of different views of the relationship between corporation and society. The term holistic refers to a trend in understanding the reality from the point of view of the multiple interactions that characterize it. It corresponds to an integrative as well as an explanatory theory that is oriented towards a contextual understanding of the processes, of the participants and of the events. From the holistic conception it was determined that this research is of a projective type. The research proposes solutions to a given situation from a process of inquiry. It implies describing, comparing, explaining and proposing alternative changes, which results in the different research stages. Regarding the research design, applying the holistic cycle, an univariate, contemporary cross-sectional and mixed source design is obtained. It is univariate, because it focuses on the management of social responsibility. It is contemporary cross-sectional, because the event is studied in the present time and a single measurement of data is performed. It relies on mixed source, because in the descriptive and explanatory stages a field design is applied when collecting data directly from the companies under study, while for the analytical and comparative stages applies a documentary design is applied. The data collection techniques were constituted by primary sources from direct observation, document review and the implementation of a structured Likert scale questionnaire. The data analysis comprised descriptive statistical analysis, reliability estimates and analysis of correlation and the path analysis through the SPSS v.19.0 and AMOS V.20 statistical software. In the descriptive and explanatory stages social responsibility management in the oil sector companies was studied. The results indicated that the oil companies operate under the guidelines outlined in the National Development Plan and in accordance with the policies, guidelines, plans and strategies for the hydrocarbons sector, issued by the Ministry of Energy and Petroleum. They also include the social commitment and the environmental policy in their management philosophy. They have in their organizational structure a social development management which deals with social responsibility. Corporate social investment is presented poorly structured and is sometimes improvised since they follow the policy guidelines of the state and not the internal sustainability policy of the oil business. As for the integrity of management companies they do not consider social responsibility in all areas, so they need to expand their conception of responsible management, redefining structures, strategies and processes, with a focus on sustainable management. As for the analytical and comparative stages applied to the study of international guidelines and standards of social responsibility, it was determined that, in terms of the comprehensiveness of management, the initiatives that stand out are the following: With respect to principles, the guidelines for multinational enterprises as indicated by OECD and the Green Paper of the European Union. Regarding the implementation and control guides, the Global Reporting Initiative and the ISO 26000 standard are relevant. And as for management systems the Ethics and Responsible Management System (SGE 21) and the IQNet SR10 Social responsibility management system have to be considered. Finally a framework for the comprehensive management of social responsibility based on international standards and the concept of sustainable development was designed. Hence, social development, ecological balance and economic growth are included allowing therefore a synergistic development. The originality of this approach is the understanding of research in a holistic way, which allows the integration of theories that address the issue of social responsibility through a structured approximation.

Simulation techniques for design of overhead conductor rail lines for speeds over 140 km/h

In overhead conductor rail lines, aluminium beams are usually mounted with support spacing between 8 and 12 meters, to limit the maximum vertical deflection in the center of the span. This small support spacing limits the use of overhead conductor rail to tunnels, therefore it has been used almost exclusively in metropolitan networks, with operation speeds below 110 km/h. Nevertheless, due to the lower cost of maintenance required for this electrification system, some railway administrations are beginning to install it in some tunnels on long-distance lines, requesting higher operation speeds [1]. Some examples are the Barcelona and Madrid suburban networks (Spain), and recent lines in Turkey and Malaysia. In order to adapt the design of the overhead conductor for higher speeds (V > 160 km/h), particular attention must be paid to the geometry of the conductor rail in critical zones as overlaps, crossings and, especially, transitions between conductor rail and conventional catenary, since the use of overhead conductor rail is limited to tunnels, as already mentioned. This paper describes simulation techniques developed in order to take into account these critical zones. Furthermore, some specific simulations results are presented that have been used to analyze and optimizes the geometry of this special zones to get a better current collection quality, in a real suburban network. This paper presents the work undertaken by the Railways Technology Research Centre (CITEF), having over 10 years of experience in railways research [1-4].

Analysis and design of a thrombectomy device by using simulation techniques

Purpose: In this work, we present the analysis, design and optimization of one experimental device recently developed in the UK, called the 'GP' Thrombus Aspiration Device (GPTAD). This device has been designed to remove blood clots without the need to make contact with the clot itself thereby potentially reducing the risk of problems such as downstream embolisation. Method: To obtain the minimum pressure necessary to extract the clot and to optimize the device, we have simulated the performance of the GPTAD analysing the resistances, compliances and inertances effects. We model a range of diameters for the GPTAD considering different forces of adhesion of the blood clot to the artery wall, and different lengths of blood clot. In each case we determine the optimum pressure required to extract the blood clot from the artery using the GPTAD, which is attached at its proximal end to a suction pump. Result: We then compare the results of our mathematical modelling to measurements made in laboratory using plastic tube models of arteries of comparable diameter. We use abattoir porcine blood clots that are extracted using the GPTAD. The suction pressures required for such clot extraction in the plastic tube models compare favourably with those predicted by the mathematical modelling. Discussion & Conclusion: We conclude therefore that the mathematical modelling is a useful technique in predicting the performance of the GPTAD and may potentially be used in optimising the design of the device.

Multi-microphone recordings (EigenMike32) inside a WFS system (Iosono) through Ambisonics techniques using Matlab

El audio multicanal ha avanzado a pasos agigantados en los últimos años, y no solo en las técnicas de reproducción, sino que en las de capitación también. Por eso en este proyecto se encuentran ambas cosas: un array microfónico, EigenMike32 de MH Acoustics, y un sistema de reproducción con tecnología Wave Field Synthesis, instalado Iosono en la Jade Höchscule Oldenburg. Para enlazar estos dos puntos de la cadena de audio se proponen dos tipos distintos de codificación: la reproducción de la toma horizontal del EigenMike32; y el 3er orden de Ambisonics (High Order Ambisonics, HOA), una técnica de codificación basada en Armónicos Esféricos mediante la cual se simula el campo acústico en vez de simular las distintas fuentes. Ambas se desarrollaron en el entorno Matlab y apoyadas por la colección de scripts de Isophonics llamada Spatial Audio Matlab Toolbox. Para probar éstas se llevaron a cabo una serie de test en los que se las comparó con las grabaciones realizadas a la vez con un Dummy Head, a la que se supone el método más aproximado a nuestro modo de escucha. Estas pruebas incluían otras grabaciones hechas con un Doble MS de Schoeps que se explican en el proyecto “Sally”. La forma de realizar éstas fue, una batería de 4 audios repetida 4 veces para cada una de las situaciones garbadas (una conversación, una clase, una calle y un comedor universitario). Los resultados fueron inesperados, ya que la codificación del tercer orden de HOA quedo por debajo de la valoración Buena, posiblemente debido a la introducción de material hecho para un array tridimensional dentro de uno de 2 dimensiones. Por el otro lado, la codificación que consistía en extraer los micrófonos del plano horizontal se mantuvo en el nivel de Buena en todas las situaciones. Se concluye que HOA debe seguir siendo probado con mayores conocimientos sobre Armónicos Esféricos; mientras que el otro codificador, mucho más sencillo, puede ser usado para situaciones sin mucha complejidad en cuanto a espacialidad. In the last years the multichannel audio has increased in leaps and bounds and not only in the playback techniques, but also in the recording ones. That is the reason of both things being in this project: a microphone array, EigenMike32 from MH Acoustics; and a playback system with Wave Field Synthesis technology, installed by Iosono in Jade Höchscule Oldenburg. To link these two points of the audio chain, 2 different kinds of codification are proposed: the reproduction of the EigenMike32´s horizontal take, and the Ambisonics´ third order (High Order Ambisonics, HOA), a codification technique based in Spherical Harmonics through which the acoustic field is simulated instead of the different sound sources. Both have been developed inside Matlab´s environment and supported by the Isophonics´ scripts collection called Spatial Audio Matlab Toolbox. To test these, a serial of tests were made in which they were compared with recordings made at the time by a Dummy Head, which is supposed to be the closest method to our hearing way. These tests included other recording and codifications made by a Double MS (DMS) from Schoeps which are explained in the project named “3D audio rendering through Ambisonics techniques: from multi-microphone recordings (DMS Schoeps) to a WFS system, through Matlab”. The way to perform the tests was, a collection made of 4 audios repeated 4 times for each recorded situation (a chat, a class, a street and college canteen or Mensa). The results were unexpected, because the HOA´s third order stood under the Well valuation, possibly caused by introducing material made for a tridimensional array inside one made only by 2 dimensions. On the other hand, the codification that consisted of extracting the horizontal plane microphones kept the Well valuation in all the situations. It is concluded that HOA should keep being tested with larger knowledge about Spherical Harmonics; while the other coder, quite simpler, can be used for situations without a lot of complexity with regards to spatiality.

Heap analysis in the presence of collection libraries

Memory analysis techniques have become sophisticated enough to model, with a high degree of accuracy, the manipulation of simple memory structures (finite structures, single/double linked lists and trees). However, modern programming languages provide extensive library support including a wide range of generic collection objects that make use of complex internal data structures. While these data structures ensure that the collections are efficient, often these representations cannot be effectively modeled by existing methods (either due to excessive analysis runtime or due to the inability to represent the required information). This paper presents a method to represent collections using an abstraction of their semantics. The construction of the abstract semantics for the collection objects is done in a manner that allows individual elements in the collections to be identified. Our construction also supports iterators over the collections and is able to model the position of the iterators with respect to the elements in the collection. By ordering the contents of the collection based on the iterator position, the model can represent a notion of progress when iteratively manipulating the contents of a collection. These features allow strong updates to the individual elements in the collection as well as strong updates over the collections themselves.

Research on intermediate band solar cells and development of experimental techniques for their characterization under concentrated illumination

Abstract This work is a contribution to the research and development of the intermediate band solar cell (IBSC), a high efficiency photovoltaic concept that features the advantages of both low and high bandgap solar cells. The resemblance with a low bandgap solar cell comes from the fact that the IBSC hosts an electronic energy band -the intermediate band (IB)- within the semiconductor bandgap. This IB allows the collection of sub-bandgap energy photons by means of two-step photon absorption processes, from the valence band (VB) to the IB and from there to the conduction band (CB). The exploitation of these low energy photons implies a more efficient use of the solar spectrum. The resemblance of the IBSC with a high bandgap solar cell is related to the preservation of the voltage: the open-circuit voltage (VOC) of an IBSC is not limited by any of the sub-bandgaps (involving the IB), but only by the fundamental bandgap (defined from the VB to the CB). Nevertheless, the presence of the IB allows new paths for electronic recombination and the performance of the IBSC is degraded at 1 sun operation conditions. A theoretical argument is presented regarding the need for the use of concentrated illumination in order to circumvent the degradation of the voltage derived from the increase in the recombi¬nation. This theory is supported by the experimental verification carried out with our novel characterization technique consisting of the acquisition of photogenerated current (IL)-VOC pairs under low temperature and concentrated light. Besides, at this stage of the IBSC research, several new IB materials are being engineered and our novel character¬ization tool can be very useful to provide feedback on their capability to perform as real IBSCs, verifying or disregarding the fulfillment of the “voltage preservation” principle. An analytical model has also been developed to assess the potential of quantum-dot (QD)-IBSCs. It is based on the calculation of band alignment of III-V alloyed heterojunc-tions, the estimation of the confined energy levels in a QD and the calculation of the de¬tailed balance efficiency. Several potentially useful QD materials have been identified, such as InAs/AlxGa1-xAs, InAs/GaxIn1-xP, InAs1-yNy/AlAsxSb1-x or InAs1-zNz/Alx[GayIn1-y]1-xP. Finally, a model for the analysis of the series resistance of a concentrator solar cell has also been developed to design and fabricate IBSCs adapted to 1,000 suns. Resumen Este trabajo contribuye a la investigación y al desarrollo de la célula solar de banda intermedia (IBSC), un concepto fotovoltaico de alta eficiencia que auna las ventajas de una célula solar de bajo y de alto gap. La IBSC se parece a una célula solar de bajo gap (o banda prohibida) en que la IBSC alberga una banda de energía -la banda intermedia (IB)-en el seno de la banda prohibida. Esta IB permite colectar fotones de energía inferior a la banda prohibida por medio de procesos de absorción de fotones en dos pasos, de la banda de valencia (VB) a la IB y de allí a la banda de conducción (CB). El aprovechamiento de estos fotones de baja energía conlleva un empleo más eficiente del espectro solar. La semejanza antre la IBSC y una célula solar de alto gap está relacionada con la preservación del voltaje: la tensión de circuito abierto (Vbc) de una IBSC no está limitada por ninguna de las fracciones en las que la IB divide a la banda prohibida, sino que está únicamente limitada por el ancho de banda fundamental del semiconductor (definido entre VB y CB). No obstante, la presencia de la IB posibilita nuevos caminos de recombinación electrónica, lo cual degrada el rendimiento de la IBSC a 1 sol. Este trabajo argumenta de forma teórica la necesidad de emplear luz concentrada para evitar compensar el aumento de la recom¬binación de la IBSC y evitar la degradación del voltage. Lo anterior se ha verificado experimentalmente por medio de nuestra novedosa técnica de caracterización consistente en la adquisicin de pares de corriente fotogenerada (IL)-VOG en concentración y a baja temperatura. En esta etapa de la investigación, se están desarrollando nuevos materiales de IB y nuestra herramienta de caracterizacin está siendo empleada para realimentar el proceso de fabricación, comprobando si los materiales tienen capacidad para operar como verdaderas IBSCs por medio de la verificación del principio de preservación del voltaje. También se ha desarrollado un modelo analítico para evaluar el potencial de IBSCs de puntos cuánticos. Dicho modelo está basado en el cálculo del alineamiento de bandas de energía en heterouniones de aleaciones de materiales III-V, en la estimación de la energía de los niveles confinados en un QD y en el cálculo de la eficiencia de balance detallado. Este modelo ha permitido identificar varios materiales de QDs potencialmente útiles como InAs/AlxGai_xAs, InAs/GaxIni_xP, InAsi_yNy/AlAsxSbi_x ó InAsi_zNz/Alx[GayIni_y]i_xP. Finalmente, también se ha desarrollado un modelado teórico para el análisis de la resistencia serie de una célula solar de concentración. Gracias a dicho modelo se han diseñado y fabricado IBSCs adaptadas a 1.000 soles.

Pulsatile flow in coronary bifurcations for different stenting techniques

The objective of this work is to analyze the local hem odynamic changes caused in a coronary bifurcation by three different stenting techniques: simple stenting of the main vessel, simple stenting of the main vessel with kissing balloon in the side branch and culotte. To carry out this study an idealized geometry of a coronary bifurcation is used, and two bifurcation angles, 45º and 90º, are chosen as representative of the wide variety of re al configurations. In order to quantify the influence of the stenting technique on the local blood flow, both numeri- cal simulations and experimental measurements are performed. First, steady simulations are carried out with the commercial code ANSYS-Fluent, and then, experimental measurements with PIV (Particle Image Velocimetry) obtained in the laboratory are used to validate the numerical simulation. The steady computational simulations show a good overall agreement with the experimental data. Second, pulsatile flow is considered to take into account the tran- sient effects. The time averaged wall shear stress, scillatory shear index and pressure drop obtained numerically are used to compare the behavior of the stenting techniques.

The Role of Knowledge Modeling Techniques in Software Development: A General Approach Based on a Knowledge Management Tool

The aim of the paper is to discuss the use of knowledge models to formulate general applications. First, the paper presents the recent evolution of the software field where increasing attention is paid to conceptual modeling. Then, the current state of knowledge modeling techniques is described where increased reliability is available through the modern knowledge acquisition techniques and supporting tools. The KSM (Knowledge Structure Manager) tool is described next. First, the concept of knowledge area is introduced as a building block where methods to perform a collection of tasks are included together with the bodies of knowledge providing the basic methods to perform the basic tasks. Then, the CONCEL language to define vocabularies of domains and the LINK language for methods formulation are introduced. Finally, the object oriented implementation of a knowledge area is described and a general methodology for application design and maintenance supported by KSM is proposed. To illustrate the concepts and methods, an example of system for intelligent traffic management in a road network is described. This example is followed by a proposal of generalization for reuse of the resulting architecture. Finally, some concluding comments are proposed about the feasibility of using the knowledge modeling tools and methods for general application design.