Wedges and plate-bandes: mechanical theories after De la Hire

Plate-bandes are straight masonry arches (they are called, also, flat arches or lintel arches). Ideally they have the surfaces of extrados and intrados plane and horizontal. The stones or bricks have radial joints converging usually in one centre. The voussoirs have the form of wedges and in French they are called "claveaux". A plate-bande is, in fact, a lintel made of several stones and the proportions of lintels and plate-bandes are similar. Proportions of plate-bandes, that is the relationship between the thickness t and the span s (t/s)varies, typically between 1/4–1/3 in thick plate-bandes, and is less than 1/20 in the most slender ones. A ratio of circa 1/8 was usual in the 18th Century and follows a simple geometrical rule: the centre form with the intrados an equilateral triangle and the plate-bande should contain an arc of circle. The joints are usually plane, but in some cases present a «rebated» or «stepped» form. Plate-bandes exert an inclined thrust as any masonry arch. This thrust is usually very high and it requires either massive buttresses, or to be built in the middle of thick walls. Master builders and architects have tried since antiquity to calculate the abutment necessary for any arch. A modern architect or engineer will measure the arch thrust in units of force, kN or tons. Traditionally, the thrust has been measured as the size of the buttresses to resist it safely. Old structural rules, then, addressed the design problem establishing a relationship between the span and the depth of the buttress. These were empirical rules, particular for every type of arch or structure in every epoch. Thus, the typical gothic buttress is 1/4 of the vault span, but a Renaissance or baroque barrel vault will need more than 1/3 of the span. A plate-bande would require more than one half of the span; this is precisely the rule cited by the French engineer Gautier, who tried unsuccessfully to justify it by static reasons. They were used, typically, to form the lintels of windows or doors (1-2 m, typically); in Antiquity they were used, also, though rarely, at the gates of city walls or in niches (ca. 2 m, reaching 5.2 m). Plate-bandes may show particular problems: it is not unusual that some sliding of the voussoirs can be observed, particularly in thick plate-bandes. The stepped joints on Fig. 1, left, were used to avoid this problem. There are other «hidden» methods, like iron cramps or the use of stone wedges, etc. In seismic zones these devices were usual. Another problem relates to the deformation; a slight yielding of the abutments, or even the compression of the mortar joints, may lead to some cracking and the descent of the central keystone. Even a tiny descent will convert the original straight line of the intrados in a broken line with a visible «kink» or angle in the middle. Of course, both problems should be avoided. Finally, the wedge form of the voussoirs lead to acute angles in the stones and this can produce partial fractures; this occurs usually at the inferior border of the springers at the abutments. It follows, that to build a successful plate-bande is not an easy matter. Also, the structural study of plate-bandes is far from simple, and mechanics and geometry are related in a particular way. In the present paper we will concentrate on the structural aspects and their constructive consequences, with a historical approach. We will outline the development of structural analysis of plate-bandes from ca. 1700 until today. This brief history has a more than purely academic interest. Different approaches and theories pointed to particular problem, and though the solution given may have been incorrect, the question posed was often pertinent. The paper ends with the application of modern Limit Analysis of Masonry Structures, developed mainly by professor Heyman in the last fifty years. The work aims, also, to give some clues for the actual architect and engineer involved in the analysis or restoration of masonry buildings.

Risk sharing with Multilateral Financial Institutions in infrastructure and energy project financing : effect on capital relief for commercial banks

(Matsukawa and Habeck, 2007) analyse the main instruments for risk mitigation in infrastructure financing with Multilateral Financial Institutions (MFIs). Their review coincided with the global financial crisis of 2007-08, and is highly relevant in current times considering the sovereign debt crisis, the lack of available capital and the increases in bank regulation in Western economies. The current macroeconomic environment has seen a slowdown in the level of finance for infrastructure projects, as they pose a higher credit risk given their requirements for long term investments. The rationale for this work is to look for innovative solutions that are focused on the credit risk mitigation of infrastructure and energy projects whilst optimizing the economic capital allocation for commercial banks. This objective is achieved through risk-sharing with MFIs and looking for capital relief in project finance transactions. This research finds out the answer to the main question: "What is the impact of risk-sharing with MFIs on project finance transactions to increase their efficiency and viability?", and is developed from the perspective of a commercial bank assessing the economic capital used and analysing the relevant variables for it: Probability of Default, Loss Given Default and Recovery Rates, (Altman, 2010). An overview of project finance for the infrastructure and energy sectors in terms of the volume of transactions worldwide is outlined, along with a summary of risk-sharing financing with MFIs. A review of the current regulatory framework beneath risk-sharing in structured finance with MFIs is also analysed. From here, the impact of risk-sharing and the diversification effect in infrastructure and energy projects is assessed, from the perspective of economic capital allocation for a commercial bank. CreditMetrics (J. P. Morgan, 1997) is applied over an existing well diversified portfolio of project finance infrastructure and energy investments, working with the main risk capital measures: economic capital, RAROC, and EVA. The conclusions of this research show that economic capital allocation on a portfolio of project finance along with risk-sharing with MFIs have a huge impact on capital relief whilst increasing performance profitability for commercial banks. There is an outstanding diversification effect due to the portfolio, which is combined with risk mitigation and an improvement in recovery rates through Partial Credit Guarantees issued by MFIs. A stress test scenario analysis is applied to the current assumptions and credit risk model, considering a downgrade in the rating for the commercial bank (lender) and an increase of default in emerging countries, presenting a direct impact on economic capital, through an increase in expected loss and a decrease in performance profitability. Getting capital relief through risk-sharing makes it more viable for commercial banks to finance infrastructure and energy projects, with the beneficial effect of a direct impact of these investments on GDP growth and employment. The main contribution of this work is to promote a strategic economic capital allocation in infrastructure and energy financing through innovative risk-sharing with MFIs and economic pricing to create economic value added for banks, and to allow the financing of more infrastructure and energy projects. This work suggests several topics for further research in relation to issues analysed. (Matsukawa and Habeck, 2007) analizan los principales instrumentos de mitigación de riesgos en las Instituciones Financieras Multilaterales (IFMs) para la financiación de infraestructuras. Su presentación coincidió con el inicio de la crisis financiera en Agosto de 2007, y sus consecuencias persisten en la actualidad, destacando la deuda soberana en economías desarrolladas y los problemas capitalización de los bancos. Este entorno macroeconómico ha ralentizado la financiación de proyectos de infraestructuras. El actual trabajo de investigación tiene su motivación en la búsqueda de soluciones para la financiación de proyectos de infraestructuras y de energía, mitigando los riesgos inherentes, con el objeto de reducir el consumo de capital económico en los bancos financiadores. Este objetivo se alcanza compartiendo el riesgo de la financiación con IFMs, a través de estructuras de risk-sharing. La investigación responde la pregunta: "Cuál es el impacto de risk-sharing con IFMs, en la financiación de proyectos para aumentar su eficiencia y viabilidad?". El trabajo se desarrolla desde el enfoque de un banco comercial, estimando el consumo de capital económico en la financiación de proyectos y analizando las principales variables del riesgo de crédito, Probability of Default, Loss Given Default and Recovery Rates, (Altman, 2010). La investigación presenta las cifras globales de Project Finance en los sectores de infraestructuras y de energía, y analiza el marco regulatorio internacional en relación al consumo de capital económico en la financiación de proyectos en los que participan IFMs. A continuación, el trabajo modeliza una cartera real, bien diversificada, de Project Finance de infraestructuras y de energía, aplicando la metodología CreditMet- rics (J. P. Morgan, 1997). Su objeto es estimar el consumo de capital económico y la rentabilidad de la cartera de proyectos a través del RAROC y EVA. La modelización permite estimar el efecto diversificación y la liberación de capital económico consecuencia del risk-sharing. Los resultados muestran el enorme impacto del efecto diversificación de la cartera, así como de las garantías parciales de las IFMs que mitigan riesgos, mejoran el recovery rate de los proyectos y reducen el consumo de capital económico para el banco comercial, mientras aumentan la rentabilidad, RAROC, y crean valor económico, EVA. En escenarios económicos de inestabilidad, empeoramiento del rating de los bancos, aumentos de default en los proyectos y de correlación en las carteras, hay un impacto directo en el capital económico y en la pérdida de rentabilidad. La liberación de capital económico, como se plantea en la presente investigación, permitirá financiar más proyectos de infraestructuras y de energía, lo que repercutirá en un mayor crecimiento económico y creación de empleo. La principal contribución de este trabajo es promover la gestión activa del capital económico en la financiación de infraestructuras y de proyectos energéticos, a través de estructuras innovadoras de risk-sharing con IFMs y de creación de valor económico en los bancos comerciales, lo que mejoraría su eficiencia y capitalización. La aportación metodológica del trabajo se convierte por su originalidad en una contribución, que sugiere y facilita nuevas líneas de investigación académica en las principales variables del riesgo de crédito que afectan al capital económico en la financiación de proyectos.

A Process Asset Library to support Software Process Improvement in Small Settings

A main factor to the success of any organization process improvement effort is the Process Asset Library implementation that provides a central database accessible by anyone at the organization. This repository includes any process support materials to help process deployment. Those materials are composed of organization's standard software process, software process related documentation, descriptions of the software life cycles, guidelines, examples, templates, and any artefacts that the organization considers useful to help the process improvement. This paper describe the structure and contents of the Web-based Process Asset Library for Small businesses and small groups within large organizations. This library is structured using CMMI as reference model in order to implement those Process Areas described by this model.

Coal purchase optimization: a review from Spain

The study addresses the need to manage the risk of the purchase price of coal in a power company by changing the management model of the purchasing department. It eliminates the risk of price reduces the cost of buying coal and optimizing the performance of all electricity generation plants belonging to the company. You get more flexibility and optionallity to gain additional benefits both economic and efficiency in the supply to our generation fleet. The tools to achieve the above purpose will be financial derivatives that will be used as elements of management and not as mere speculation in the markets.

An Integrated Approach to Strategic Asset Management

This paper focuses on identifying and analysing the elements of Strategic Management for infrastructure and engineering assets. These elements are contended to involve an understanding of governance, corporate policy, corporate objectives, corporate strategy and interagency collaboration and will in turn, allow the ability determine a broader and more comprehensive framework for engineering asset management, ie a ‘staged approach’ to understanding how assets are managed within organisations. While the assets themselves have often been the sole concern for good management practices, other social and contextual elements have come into the mix in order to promote strategic asset management. The development of an integrated approach to asset management is at the base of the research question. What are the considerations and implications for adopting and implementing an integrated strategic asset management (ISAM) framework? While operational matters have been given prominence, a subset of corporate governance, Asset Governance, details the policies and processes needed to acquire, utilise, maintain and account for an organisation’s assets. Asset governance stems from the organisation’s overarching corporate governance principles; as a result it defines the management context in which engineering asset management is implemented. This aspect will be examined to determine the appropriate relationship between organisational strategic management and strategic asset management to further the theoretical engagement with the maturity of strategy,policy and governance for infrastructure and engineered assets. Asset governance stems from the organisation’s overarching corporate governance principles; as a result it defines the management context in which engineering asset management is implemented. The research proceeds by a document analysis of corporate reports and policy recommendations in terms of infrastructure and engineered assets. The paper concludes that incorporating an integrated asset management framework can promote a more robust conceptualisation of public assets and how they combine to provide a comprehensive system of service outcomes.

La financiación y la inversión inmobiliaria : repercusiones en el urbanismo y la arquitectura

El presente trabajo de tesis doctoral tiene por finalidad demostrar que las decisiones de financiación y de inversión inmobiliaria en España influyen de manera determinante en la configuración del proceso urbanístico y arquitectónico. Este planteamiento inicial obliga a formular las siguientes cuestiones: - En una primera fase, la situación en España del sector inmobiliario y su relación con el sector financiero en el contexto de la actual crisis financiera, iniciada en el año 2008. - Los métodos de análisis y selección de inversiones y su aplicación a los proyectos de inversión en función de la naturaleza de los activos inmobiliarios. - La valoración inmobiliaria para determinadas entidades financieras. - Características de la gestión financiera empresarial y de las empresas inmobiliarias. - El origen de fondos para financiar el proceso urbanístico y arquitectónico mediante las instituciones de inversión colectiva inmobiliaria y el mercado inmobiliario. - La regulación actual en España, a nivel estatal, del suelo como materia prima del sector inmobiliario. - La edificación residencial y el mercado inmobiliario en el actual contexto económico. - La posibilidad de crear en España un mercado de derivados basado en activos inmobiliarios. - Cómo repercute la actividad económica, a través de la inversión y la financiación, en los activos inmobiliarios, en el urbanismo y la arquitectura. Las cuestiones precedentes se resuelven de forma sistemática y metodológica en esta tesis doctoral estructurada en tres grandes bloques (inversión, financiación y repercusiones en el urbanismo y la arquitectura), obteniendo una serie de respuestas reflejadas en el desarrollo del presente trabajo que se sintetizan en las siguientes líneas: - La actual crisis financiera iniciada en el año 2008 ha provocado en España el colapso del sector inmobiliario y una nueva concepción en la naturaleza de los activos inmobiliarios. El sector inmobiliario trae causa del sector financiero, en especial del crédito bancario. - Dependencia y vinculación del sector inmobiliario español de la política monetaria europea: la incorporación de España a la moneda única transforma por completo el sector inmobiliario español. - Los métodos de análisis y selección de inversiones se conforman como instrumentos relevantes que nos permiten jerarquizar nuestros proyectos. No obstante, presentan una serie de limitaciones y dificultades de aplicación práctica, por lo que no deben considerarse como herramientas que nos aporten una única solución irrefutable. - La valoración de activos inmobiliarios se constituye en un pilar básico que fundamenta la correcta aplicación de los fondos. - La inversión en activos inmobiliarios puede realizarse de forma directa o indirecta. En este último supuesto, con una influencia relevante de las innovaciones financieras surgidas en los últimos años. - Las instituciones de inversión colectiva y el mercado hipotecario constituyen instituciones fundamentales capaces de captar importantes cantidades de fondos que impulsan y financian el proceso urbanístico y arquitectónico. - El complejo y cambiante sistema jurídico español en materia de suelo, dificulta la implementación de los procesos urbanísticos y arquitectónicos. - Tras la crisis financiera de 2008, los activos inmobiliarios tienen un comportamiento similar a otros activos en cuanto a subidas y bajadas de precios. En el actual sistema económico, la especulación forma parte inherente a la naturaleza de los activos inmobiliarios. - Desde una perspectiva teórica, existe la posibilidad de crear un mercado de derivados que tenga como subyacente activos de naturaleza inmobiliaria. - Sin actividad económica, el proceso urbanístico y arquitectónico carecerá finalmente de sentido y tenderá a desaparecer. No obstante, son las innovaciones tecnológicas, a nivel de producto y proceso, las principales causantes del impulso de la actividad económica. - A pesar de lo expresado en los documentos urbanísticos internacionales, la transformación del urbanismo y la arquitectura dependen principalmente de la actividad económica y la tecnología. En un segundo nivel, la inversión y la financiación condicionan y definen el urbanismo y la arquitectura, incluso a nivel de proyecto si se pretende su materialización. En base al desarrollo previo, el objetivo fundamental de esta tesis doctoral ha sido demostrar que las decisiones de financiación y de inversión tienen una importancia capital y determinan la configuración de los activos inmobiliario, del urbanismo y la arquitectura, por lo que deben ser tenidas en cuenta no sólo en su materialización sino incluso en la propia concepción del proceso creativo. ABSTRACT The present dissertation aims to show that real estate financing and investment decisions in Spain play a predominant role in structuring urban development and architectural solutions. The issues addressed to support that contention include: - As a preliminary study, the situation of the real estate industry in Spain and its relationship to the financial sector in the context of the 2008 financial crisis. - The methods used to analyse and select investments and their application to investment projects, by type of real estate asset. - Appraisal of certain financial institutions’ real estate asset holdings. - Characteristics of financial institution and real estate company corporate management. - Sourcing funds for financing urban development and architecture through real estate investment trusts and the real estate market. - Present nation-wide regulations on landed property in Spain as a raw material for the real estate industry. - Residential building construction and the real estate market in the present economic context. - The possibility of creating a real estate asset-based derivatives market in Spain - The impact of economic activity, through investment and financing, on real estate assets, urban development and architecture. The aforementioned issues are addressed systematically and methodically in this dissertation, which is divided into three major units: investment, financing, and impact on urban development and architecture. The conclusions drawn are summarised below. - The financial crisis that began in 2008 has induced the collapse of the Spanish real estate industry and spawned a new perception of the nature of real estate assets. The real estate industry is dependent upon the financial sector, in particular on bank loans. - The Spanish real estate industry also depends on and is related to European monetary policy: Spain’s adherence to the single currency ushered in a thorough overhaul of its real estate industry. - Investment analysis and selection methods constitute highly suitable tools for project evaluation and ranking. Nonetheless, inasmuch as their practical implementation is subject to a series of limitations and difficulties, they should not be thought able to deliver a single irrefutable solution. - Real estate asset appraisal is a mainstay to the rightful application of funds. - Real estate asset investments can be made directly or indirectly. The latter approach is heavily influenced by the financial innovations forthcoming in recent years. - Investment trusts and the mortgage market are key institutions able to raise substantial funding, thereby driving and financing urban development and architecture. - Spain’s complex and changing legal provisions on land management are an obstacle to urban development and architecture. - Since the 2008 crisis, real estate assets have behaved much like other assets in terms of rising and falling prices. In the present economic context, speculation is indivisible from real estate assets. - Theoretically speaking, a derivatives market with real estate holdings as the underlying assets lies within the realm of possibility. - In the absence of economic activity, urban development and architecture are senseless pursuits and tend to disappear. Technological innovation in products and processes are the main drivers of economic activity. - Despite the opinion expressed in international papers on the subject, the transformation of urban development and architecture depend primarily on economic activity and technology. In a second dimension, investment and financing condition and define urban development and architecture, even at the design level for projects aspiring to actual construction. Pursuant to the foregoing, the primary aim of this dissertation is to show that financial and investment decisions are of cardinal importance and determine the structure of real estate assets, urban development and architecture. They must consequently be borne in mind not only in connection with implementation, but also with conceptual design and the creative process itself. I

People and Facility Management. The team: the main asset of any management

From the moment we enter a large office building until we leave it, we receive a lot of attentions served by the management of services to the user. However, it is usually quite inappreciable the work that is being developed to keep things running smoothly.The services provided in a building are carried out by people. However, we often tend to forget these people when we talk about the tasks that make that a building operates properly 24 hours a day, 365 days a year.But, for example, what would happen if one day the service provided by the reception in a large building did not function as it should? What would it be like if one day the person performing the service of maintenance of the building's cleaning were not at his post? How would the working day develop if there were not a correct air handling system?People are the foundation of the proper functioning of a building. The work of the Facilities Manager and the Facility Management is the management of their functions: the responsible management of the team.

EU support mechanisms to promote public private partnerships for financing Trans-European transport infrastructure

Since the mid 80ies the Trans ‐European Transport Network (TEN‐T) policy has been setting the framework for the development of infrastructure for the smooth functioning of the internal market within the European Union (EU). Public Private Partnerships (PPPs) have always been regarded by the EU as a key instrument to promote the TEN‐T.

A comparative analysis of road financing approaches in Europe and the United States

• The viability of the present system of road funding has in recent years been widely questioned, for it has proved insufficient to support spending programs at their current levels. • Some transfers from the general fund have been needed since 2008 to keep the HTF solvent. • Fuel taxes, the primary source for funding roads in the US, have not kept pace with inflation for years. • A wide variety of measures to increase revenue has been presented: raising fuel taxes, extending toll highways, implementing a VMT fee, etc.

Comparative analysis of road financing approaches in Europe and the United States

Road infrastructure has a remarkable economic and social impact on society. This is why road financing has always drawn the attention of policymakers, especially when resources available for government spending become scarce. Nations exhibit differing approaches to dealing with road transportation financing. In the United States, the current system of road funding has been called into question because some regard it as insufficient to meet the amounts now required for road expenditures. By contrast, in most European countries, road charges are very high, but these revenues are not allocated for the funding of roads. This paper analyzes the balance between charging for the use of and expenditure on the road sector in the United States and compares the American policy with those of several European countries (Germany, United Kingdom, France, Spain, and Switzerland). To that end, a methodology is defined to calculate the annual amount of fee charges levied on light and heavy vehicles in the selected countries in order to compare those charges with annual road expenditures. The results show that road charges in America are noticeably lower than those paid in Europe. Additionally, the research concludes that in Europe, road-generated revenues exceed road expenditures in all the countries studied, so road charges actually subsidize other policies. By contrast, in the United States, the public sector subsidizes the road system in order to maintain the current level of expenditure.

People, management and social responsability. The team: the main asset of any management

People, management and social responsability. The team: the main asset of any management. En colaboración con Dña. Montserrat Castellanos Moreno. Profesora Asociada de la Universidad Europea. Journal of Management and Marketing. Thomson Reuters. Zilina. Slovakia

People and Facility Management. The team: The main asset of any management

From the moment we enter a large office building until we leave it, we receive a lot of attentions served by the management of services to the user. However, it is usually quite inappreciable the work that is being developed to keep things running smoothly. The services provided in a building are carried out by people. However, we often tend to forget these people when we talk about the tasks that make that a building operates properly 24 hours a day, 365 days a year. But, for example, what would happen if one day the service provided by the reception in a large building did not function as it should? What would it be like if one day the person performing the service of maintenance of the building's cleaning were not at his post? How would the working day develop if there were not a correct air handling system? People are the foundation of the proper functioning of a building. The work of the Facilities Manager and the Facility Management is the management of their functions: the responsible management of the team.

Metodología de integración de actividades de adaptación al cambio climático en proyectos de desarrollo rural

Hoy en día, ya no se puede pasar por alto la necesidad de una agricultura climáticamente más inteligente para los 500 millones de pequeños agricultores del mundo (Wheeler, 2013). Estos representan aproximadamente el 60 % de la agricultura mundial y proporcionan hasta el 80 % de los alimentos en los países en vías de desarrollo, los pequeños agricultores gestionan vastas extensiones de tierra y lamentablemente incluyen los grupos con mayor proporción de personas en estado de inseguridad alimentaria. El cambio climático está transformando el contexto para la agricultura en pequeña escala. Durante siglos, los pequeños agricultores desarrollaron la capacidad de adaptarse a los cambios ambientales y la variabilidad del clima, pero la velocidad y la intensidad del cambio climático está superando su capacidad de respuesta. Si no se cambia la manera que tenemos de lidiar con el cambio climático, tanto en acciones locales como globales, es muy probable que las personas rurales de entornos vulnerables tengan que adaptarse a un calentamiento global promedio de 4 °C por encima de los niveles preindustriales para el año 2100. Esta alza de las temperaturas aumentará aún más la incertidumbre y provocará desastres naturales como las sequías, la erosión del suelo, la pérdida de biodiversidad y la escasez agua sean mucho más frecuentes. Uno de los factores más importantes para los pequeños agricultores es que ya no pueden depender de los promedios históricos, por lo que es más difícil para ellos para planificar y gestionar la producción debido a los cambios en los patrones climáticos. Algunos de los principales cultivos de cereales (trigo, arroz, maíz, etc.) han alcanzado su umbral de tolerancia al calor y un aumento de la temperatura en torno a 1,5-2 °C podría ser muy perjudicial. Estos efectos a corto plazo podrían ser agravados por otros a medio y largo plazo, los que se refieren al impacto socioeconómico en términos de oportunidades y estabilidad política. El cambio climático está haciendo que el desarrollo de la pequeña agricultura resulte mucho más caro. A nivel de proyectos, los programas resistentes al clima tienen, normalmente, unos costos iniciales más altos, tanto de diseño como de implementación. Por ejemplo, es necesario incluir gastos adicionales en infraestructura, operación y mantenimiento; desarrollo de nuevas capacidades y el intercambio de conocimientos en torno al cambio climático. También se necesita mayor inversión para fortalecer las instituciones frente a los nuevos retos que propone el cambio climático, o generar información que pueda ser de escala reducida y con enfoques que beneficien a la comunidad, el cambio climático es global pero los efectos son locales. Es, por tanto, el momento de redefinir la relación entre agricultura y medio ambiente, ya que se hace cada vez más necesario buscar mejores y más eficientes maneras para responder al cambio climático. Es importante señalar que la respuesta al cambio climático no significa reinventar todo lo que se ha aprendido sobre el desarrollo, significa aplicar un esfuerzo renovado para hacer frente a los cambios en el trabajo de cooperación al desarrollo de una manera más sistemática y más amplia. Una respuesta coherente al cambio climático requiere que la comunidad internacional reconozca la necesidad de aumentar el apoyo financiero para la adaptación así como un mayor énfasis en proporcionar soluciones diseñadas para aumentar la resiliencia1 de los pequeños agricultores a las crisis relacionadas con el clima. Con el fin de responder a algunos de los desafíos mencionados anteriormente, esta investigación pretende contribuir a fortalecer las capacidades de los pequeños productores, aquellos que actualmente están la primera línea frente a los desafíos del cambio climático, promoviendo un desarrollo que tenga un impacto positivo en sus medios de vida. La tesis se compone de cuatro capítulos. El primero define y analiza el marco teórico de las interacciones entre el cambio climático y el impacto en los proyectos de desarrollo rural, especialmente los que tienen por objetivo mejorar la seguridad alimentaria de los pequeños productores. En ese mismo capítulo, se presenta una revisión global de la financiación climática, incluyendo la necesidad de asignar suficientes recursos para la adaptación. Con el fin de lograr una mayor eficacia e impacto en los proyectos de desarrollo, la investigación desarrolla una metodología para integrar actividades de adaptación al cambio climático, presentada en el segundo capítulo. Esta metodología fue implementada y validada durante el periodo 2012-14, trabajando directamente con diferentes equipos gubernamentales en diez proyectos del Fondo Internacional de Desarrollo Agrícola ). El tercero presenta, de manera detallada, la aplicación de la metodología a los estudios de caso de Bolivia y Nicaragua, así como un resumen de las principales conclusiones en la aplicación de los ocho países restantes. Finalmente, en el último capítulo se presentan las conclusiones y un esbozo de futuras líneas de investigación. Actualmente, el tema de la sostenibilidad ambiental y el cambio climático está ganando terreno en la agenda de desarrollo. Es por ello que se alumbra esta investigación, para que a través de los resultados obtenidos y la implementación de la metodología propuesta, sirva como herramienta estratégica para la planificación y la gestión operativa a la hora de integrar iniciativas de adaptación en los proyectos de desarrollo rural. ABSTRACT The need for climate-smart agriculture for the world’s 500 million smallholder farms cannot be overlooked: they account for 60 per cent of global agriculture, provide up to 80 per cent of food in developing countries, manage vast areas of land and make up the largest share of the developing world’s undernourished. Climate change is transforming the context for smallholder agriculture. Over centuries smallholders have developed the capacity to adapt to environmental change and climate variability, but the speed and intensity of climate change is outpacing the speed of historically autonomous actions. In the absence of a profound step-change in local and global action on climate change, it is Increasingly likely that poor rural people would need to contend with an average global warming of 4 degrees above pre-industrial levels by 2100, if not sooner. Such substantial climatic change will further increase uncertainty and exacerbate weather –related disasters, droughts, biodiversity loss, and land and water scarcity. Perhaps most significantly for smallholder farmers, they can no longer rely on historical averages, making it harder for them to plan and manage production when planting seasons and weather patterns are shifting. The major cereal crops (wheat, rice, maize, etc.) are at their heat tolerance threshold and with a 1.5-2°C temperature increase could collapse. These “first-round” effects will be compounded by second-round socio-economic impacts in terms of economic opportunities and political stability. Climate change is making the development of smallholder agriculture more expensive. At project level, climate-resilient programmes typically have higher up-front design and implementation costs – e.g. infrastructure costs and initially increased asset management, operation and maintenance, more capacity-building and knowledge sharing, strengthening institutions, greater project development costs (downscaled data generation and community-based approaches), and greater costs from enhancing cross sectorial and stakeholders collaboration. Consequently it’s time to redefine the relationship between agriculture and environment as we need to look better and more efficient ways to respond to climate change. It is important to note that responding to climate change does not mean to throwing out or reinventing everything that has been learnt about development. It means a renewed effort to tackle wider and well-known development changes in a more systematic way. A coherent response to climate change requires acknowledge of the need to increase the financial support for adaptation and a continued emphasis on provided solutions designed to increase the resilience of smallholders and poor communities to shocks, which are weather related. In order to respond to some of the challenges mentioned before, this research aims to contribute to strengthen the capacities of the smallholders and to promote a development that will positively impact in the rural livelihoods of the most vulnerable smallholders farmers; those who currently are in the first line facing the challenges of climate change. The thesis has four chapters. Chapter one describes and analyses the theoretical framework of the interactions between climate change and the impact on rural development projects, especially those aimed at improving the food security of smallholders producers. In this chapter a comprehensive review of climate financing is presented, including the need to allocate sufficient resources for adaptation. In order to achieve greater effectiveness and impact on development projects, the research develops in the second chapter a methodology to integrate adaptation activities for climate change. This methodology was implemented and validated during the 2012-14 period, working directly with various government teams in ten projects of the International Fund for Agricultural Development (IFAD). The third chapter presents in detail the application of the methodology to the case studies of Bolivia and Nicaragua, as well as a summary of the main conclusions of its implementation in the remaining eight countries. The final chapter exposes the main conclusions and future research topics. At a time when environmental sustainability and climate change issues are gaining more attention, the research and obtained results through the implementation of the model methodology proposed, can be considered a strategic tool for planning and operational management to integrate adaptation initiatives in rural development projects. The use of the proposed methodology will boost incentives to scale up climate resilience programmes and integrate adaptation to climate change into wider smallholder development programmes.

Sistema autónomo para carga de baterías mediante una instalación fotovoltaica con aplicación directa al vehículo eléctrico y usos

La situación energética actual es insostenible y como consecuencia se plantea un escenario próximo orientado a conseguir un futuro energético sostenible que permita el desarrollo económico y el bienestar social. La situación ambiental actual está afectada directamente por la combustión de combustibles fósiles que en 2013 constituyeron el 81% de la energía primaria utilizada por el ser humano y son la principal fuente antropogénica de gases de efecto invernadero. Los informes del IPCC1, ponen de manifiesto que el cambio climático se ha consolidado durante los últimos años y en la conferencia de la ONU sobre cambio climático de París que se celebrará a finales de 2015, se pretende que los gobiernos suscriban un acuerdo universal para limitar las emisiones de gases de efecto invernadero y evitar que el incremento de la temperatura media global supere los 2°C. Por otra parte, en el interior de las ciudades es especialmente preocupante, por su efecto directo sobre la salud humana, el impacto ambiental producido por las emisiones de NOx que generan el transporte de personas y mercancías. El sector del transporte fue responsable en 2012 del 27,9% del consumo final de energía. Una vez expuesto el escenario energético y ambiental actual, en esta tesis, se analiza la eficiencia de un sistema autónomo fotovoltaico para la carga de baterías de vehículos eléctricos y el uso del mismo con otras cargas, con el objetivo de aprovechar al máximo la energía eléctrica generada y contribuir a la utilización de energía limpia que no produzca impacto ambiental. Como primer paso para el desarrollo de la tesis se hizo un estudio de trabajos previos comenzando por las primeras aplicaciones de la energía fotovoltaica en los vehículos solares para después pasar a trabajos más recientes enfocados al suministro de energía a los vehículos eléctricos. También se hizo este estudio sobre las metodologías de simulación en los sistemas fotovoltaicos y en el modelado de distintos componentes. Posteriormente se eligieron, dentro de la amplia oferta existente en el mercado, los componentes con características técnicas más adecuadas para este tipo de instalaciones y para las necesidades que se pretenden cubrir. A partir de los parámetros técnicos de los componentes elegidos para configurar la instalación autónoma y utilizando modelos contrastados de distintos componentes, se ha desarrollado un modelo de simulación en ordenador del sistema completo con el que se han hecho simulaciones con distintos modos de demanda de energía eléctrica, según los modos de carga disponibles en el vehículo eléctrico para corriente alterna monofásica de 230 V. También se han simulado distintos tamaños del generador fotovoltaico y del sistema de acumulación de energía eléctrica para poder determinar la influencia de estos parámetros en los balances energéticos del sistema. Utilizando recursos propios el doctorando ha realizado la instalación real de un sistema fotovoltaico que incluye sistema de acumulación e inversor en un edificio de su propiedad. Para la realización de la tesis, La Fundación de Fomento e Innovación Industrial (F2I2) ha facilitado al doctorando un dispositivo que permite realizar la alimentación del vehículo eléctrico en modo 2 (este modo emplea un adaptador que incorpora dispositivos de seguridad y se comunica con el vehículo permitiendo ajustar la velocidad de recarga) y que ha sido necesario para los trabajos desarrollados. Se ha utilizado la red eléctrica como sistema de apoyo de la instalación fotovoltaica para permitir la recarga en el modo 2 que requiere más potencia que la proporcionada por el sistema fotovoltaico instalado. Se han analizado mediante simulación distintos regímenes de carga que se han estudiado experimentalmente en la instalación realizada, a la vez que se han hecho ensayos que se han reproducido mediante simulación con los mismos valores de radiación solar y temperatura con objeto de contrastar el modelo. Se han comparado los resultados experimentales con los obtenidos mediante simulación con objeto de caracterizar el comportamiento del sistema de acumulación (energía eléctrica suministrada y tensión de salida en las baterías) y del generador fotovoltaico (energía eléctrica fotovoltaica suministrada). Por último, se ha realizado un estudio económico de la instalación autónoma fotovoltaica ejecutada y simulada. En el mismo se ha planteado la utilización de fondos propios (como realmente se ha llevado a cabo) y la utilización de financiación, para determinar dos posibles escenarios que pudieran ser de utilidad a un propietario de vehículo eléctrico. Se han comparado los resultados obtenidos en los dos escenarios propuestos del estudio económico del sistema, en cuanto a los parámetros de tiempo de retorno de la inversión, valor actual neto de la inversión y tasa interna de retorno de la misma. Las conclusiones técnicas obtenidas, permiten la utilización del sistema con los modos de carga ensayados y otro tipo de cargas que aprovechen la generación eléctrica del sistema. Las baterías ofrecen mejor comportamiento cuando el aporte fotovoltaico está presente, pero no considera adecuado la conexión de cargas elevadas a un sistema de acumulación de gel (plomo-acido) como el que se ha utilizado, debido al comportamiento de este tipo de baterías ante demandas de intensidad de corriente eléctrica elevadas. Por otra parte, el comportamiento de este tipo de baterías con valores de intensidad de corriente eléctrica inferiores a 10 A en ausencia de energía fotovoltaica, con el objetivo de utilizar la generación de energía eléctrica diaria acumulada en el sistema, sí resulta interesante y ofrece un buen comportamiento del sistema de acumulación. Las circunstancias actuales de mercado, que carece de sistemas de acumulación de litio con precios de compra interesantes, no han permitido poder experimentar este sistema de acumulación en la instalación autónoma fotovoltaica ejecutada, tampoco se ha podido obtener el favor de ningún fabricante para ello. Actualmente hay disponibles sistemas de acumulación en litio que no se comercializan en España y que serían adecuados para el sistema de acumulación de energía propuesto en este estudio, que deja abierta las puertas para futuros trabajos de investigación. Las conclusiones económicas obtenidas, rentabilizan el uso de una instalación autónoma fotovoltaica con consumo instantáneo, sin acumulación de energía eléctrica. El futuro de conexión a red por parte de estas instalaciones, cuando se regule, aportará un incentivo económico para rentabilizar con menos tiempo las instalaciones autónomas fotovoltaicas, esto también deja la puerta abierta a futuros trabajos de investigación. El sistema de acumulación de energía aporta el mayor peso económico de inversión en este tipo de instalaciones. La instalación estudiada aporta indicadores económicos que la hacen rentable, pero se necesitaría que los precios de acumulación de la energía en sistemas eficientes estén comprendidos entre 100-200 €/kWh para que el sistema propuesto en este trabajo resulte atractivo a un potencial propietario de un vehículo eléctrico. ABSTRACT The current energy situation is untenable; it poses a scenario next focused on reaching a sustainable energy future, to allow economic development and social welfare. The environmental current situation is affected directly by the combustion of fossil fuels that in 2013 constituted 81 % of the primary energy used by the human being and they are the principal source human of greenhouse gases. The reports of the IPCC2, they reveal that the climate change has consolidated during the last years and in the conference of the UNO on climate change of Paris that will be celebrated at the end of 2015, there is claimed that the governments sign a universal agreement to limit the emission of greenhouse gases and to prevent that the increase of the global average temperature overcomes them 2°C. On the other hand, inside the cities it is specially worrying, for his direct effect on the human health, the environmental impact produced by the NOx emissions that generate the persons' transport and goods. The sector of the transport was responsible in 2012 of 27,9 % of the final consumption of energy. Once exposed the scenario and present environmental energy, in this thesis, it has analyzed the efficiency of an autonomous photovoltaic system for charging electric vehicles, and the use of the same with other workloads, with the objective to maximize the electrical energy generated and contribute to the use of clean energy that does not produce environmental impact. Since the first step for the development of the thesis did to itself a study of previous works beginning for the first applications of the photovoltaic power in the solar vehicles later to go on to more recent works focused on the power supply to the electrical vehicles. Also this study was done on the methodologies of simulation in the photovoltaic systems and in the shaped one of different components. Later they were chosen, inside the wide existing offer on the market, the components with technical characteristics more adapted for this type of facilities and for the needs that try to cover. From the technical parameters of the components chosen to form the autonomous installation and using models confirmed of different components, a model of simulation has developed in computer of the complete system with which simulations have been done by different manners of demand of electric power, according to the available manners of load in the electrical vehicle for single-phase alternating current of 230 V. Also there have been simulated different sizes of the photovoltaic generator and of the system of accumulation of electric power to be able to determine the influence of these parameters in the energy balances of the system. Using own resources the PhD student has realized a real installation of a photovoltaic system that includes system of accumulation and investing in a building of his property. For the accomplishment of the thesis, The Foundation of Promotion and Industrial Innovation (F2I2) it has facilitated to the PhD student a device that allows to realize the supply of the electrical vehicle in way 2 (this way uses an adapter that incorporates safety devices and communicates with the vehicle allowing to fit the speed of recharges) and that has been necessary for the developed works. The electrical network has been in use as system of support of the photovoltaic installation for allowing it her recharges in the way 2 that more power needs that provided by the photovoltaic installed system. There have been analyzed by means of simulation different rate of load that have been studied experimentally in the realized installation, simultaneously that have done to themselves tests that have reproduced by means of simulation with the same values of solar radiation and temperature in order the model contrasted. The experimental results have been compared by the obtained ones by means of simulation in order to characterize the behavior of the system of accumulation (supplied electric power and tension of exit in the batteries) and of the photovoltaic generator (photovoltaic supplied electric power). Finally, there has been realized an economic study of the autonomous photovoltaic executed and simulated installation. In the same one there has appeared the utilization of own funds (since really it has been carried out) and the utilization of financing, to determine two possible scenes that could be of usefulness to an owner of electrical vehicle. There have been compared the results obtained in both scenes proposed of the economic study of the system, as for the parameters of time of return of the investment, current clear value of the investment and rate hospitalizes of return of the same one. The technical obtained conclusions, they make the utilization of the system viable with the manners of load tested and another type of loads of that they take advantage the electrical generation of the system. The batteries offer better behavior when the photovoltaic contribution is present, but he does not consider to be suitable the connection of loads risen up to a system of accumulation of gel (lead - acid) as the one that has been in use, due to the behavior of this type of batteries before demands of intensity of electrical current raised. On the other hand, the behavior of this type of batteries with low values of intensity of electrical current to 10 To in absence of photovoltaic power, with the aim to use the generation of daily electric power accumulated in the system, yes turns out to be interesting and offers a good behavior of the system of accumulation. The current circumstances of market, which lacks systems of accumulation of lithium with interesting purchase prices, have not allowed to be able to experience this system of accumulation in the autonomous photovoltaic executed installation, neither one could have obtained the favor of any manufacturer for it. Nowadays there are available systems of accumulation in lithium that is not commercialized in Spain and that they would be adapted for the system of accumulation of energy proposed in this study, which makes the doors opened for future works of investigation. The economic obtained conclusions; they make more profitable the use of an autonomous photovoltaic installation with instantaneous consumption, without accumulation of electric power. The future of connection to network on the part of these facilities, when it is regulated, will contribute an economic incentive to make profitable with less time the autonomous photovoltaic facilities, this also leaves the door opened for future works of investigation. The system of accumulation of energy contributes the major economic weight of investment in this type of facilities. The studied installation contributes economic indicators that make her profitable, but it would be necessary that the prices of accumulation of the energy in efficient systems are understood between 100-200 € in order that the system proposed in this work turns out to be attractive to a proprietary potential of an electrical vehicle.

Impact assessment of an integrated approach for thermal power generation plants asset management in the current energy market

El sector energético, en España en particular, y de forma similar en los principales países de Europa, cuenta con una significativa sobrecapacidad de generación, debido al rápido y significativo crecimiento de las energías renovables en los últimos diez años y la reducción de la demanda energética, como consecuencia de la crisis económica. Esta situación ha hecho que las centrales térmicas de generación de electricidad, y en concreto los ciclos combinados de gas, operen con un factor de utilización extremadamente bajo, del orden del 10%. Además de la reducción de ingresos, esto supone para las plantas trabajar continuamente fuera del punto de diseño, provocando una significativa pérdida de rendimiento y mayores costes de explotación. En este escenario, cualquier contribución que ayude a mejorar la eficiencia y la condición de los equipos, es positivamente considerada. La gestión de activos está ganando relevancia como un proceso multidisciplinar e integrado, tal y como refleja la reciente publicación de las normas ISO 55000:2014. Como proceso global e integrado, la gestión de activos requiere el manejo de diversos procesos y grandes volúmenes de información, incluso en tiempo real. Para ello es necesario utilizar tecnologías de la información y aplicaciones de software. Esta tesis desarrolla un concepto integrado de gestión de activos (Integrated Plant Management – IPM) aplicado a centrales de ciclo combinado y una metodología para estimar el beneficio aportado por el mismo. Debido a las incertidumbres asociadas a la estimación del beneficio, se ha optado por un análisis probabilístico coste-beneficio. Así mismo, el análisis cuantitativo se ha completado con una validación cualitativa del beneficio aportado por las tecnologías incorporadas al concepto de gestión integrada de activos, mediante una entrevista realizada a expertos del sector de generación de energía. Los resultados del análisis coste-beneficio son positivos, incluso en el desfavorable escenario con un factor de utilización de sólo el 10% y muy prometedores para factores de utilización por encima del 30%. ABSTRACT The energy sector particularly in Spain, and in a similar way in Europe, has a significant overcapacity due to the big growth of the renewable energies in the last ten years, and it is seriously affected by the demand decrease due to the economic crisis. That situation has forced the thermal plants and in particular, the combined cycles to operate with extremely low annual average capacity factors, very close to 10%. Apart from the incomes reduction, working in out-of-design conditions, means getting a worse performance and higher costs than expected. In this scenario, anything that can be done to improve the efficiency and the equipment condition is positively received. Asset Management, as a multidisciplinary and integrated process, is gaining prominence, reflected in the recent publication of the ISO 55000 series in 2014. Dealing Asset Management as a global, integrated process needs to manage several processes and significant volumes of information, also in real time, that requires information technologies and software applications to support it. This thesis proposes an integrated asset management concept (Integrated Plant Management-IPM) applied to combined cycle power plants and develops a methodology to assess the benefit that it can provide. Due to the difficulties in getting deterministic benefit estimation, a statistical approach has been adopted for the cot-benefit analysis. As well, the quantitative analysis has been completed with a qualitative validation of the technologies included in the IPM and their contribution to key power plant challenges by power generation sector experts. The cost- benefit analysis provides positive results even in the negative scenario of annual average capacity factor close to 10% and is promising for capacity factors over 30%.