Cooperation in the knowledge transfer process: evidence from the demand side in Mexico

This paper presents the results of the analysis focused on scientific-technological KT in four Mexican firms and carried out by the case study approach. The analysis highlights the use of KT mechanisms as a means to obtain scientific-technological knowledge, learning, building S&T capabilities, and achieve the results of the R&D and innovation by firms.

Towards a Transfer Model of Scientific and Technological Knowledge: the Case of Mexico

This paper shows the development of a science-technological knowledge transfer model in Mexico, as a means to boost the limited relations between the scientific and industrial environments. The proposal is based on the analysis of eight organizations (research centers and firms) with varying degrees of skill in the practice of science-technological knowledge transfer, and carried out by the case study approach. The analysis highlights the synergistic use of the organizational and technological capabilities of each organization, as a means to identification of the knowledge transfer mechanisms best suited to enabling the establishment of cooperative processes, and achieve the R&D and innovation activities results.

Climate change technology transfer to developing countries: evidence analysis and policy recommendations

Developing countries are experiencing unprecedented levels of economic growth. As a result, they will be responsible for most of the future growth in energy demand and greenhouse gas (GHG) emissions. Curbing GHG emissions in developing countries has become one of the cornerstones of a future international agreement under the United Nations Framework Convention for Climate Change (UNFCCC). However, setting caps for developing countries’ GHG emissions has encountered strong resistance in the current round of negotiations. Continued economic growth that allows poverty eradication is still the main priority for most developing countries, and caps are perceived as a constraint to future growth prospects. The development, transfer and use of low-carbon technologies have more positive connotations, and are seen as the potential path towards low-carbon development. So far, the success of the UNFCCC process in improving the levels of technology transfer (TT) to developing countries has been limited. This thesis analyses the causes for such limited success and seeks to improve on the understanding about what constitutes TT in the field of climate change, establish the factors that enable them in developing countries and determine which policies could be implemented to reinforce these factors. Despite the wide recognition of the importance of technology and knowledge transfer to developing countries in the climate change mitigation policy agenda, this issue has not received sufficient attention in academic research. Current definitions of climate change TT barely take into account the perspective of actors involved in actual climate change TT activities, while respective measurements do not bear in mind the diversity of channels through which these happen and the outputs and effects that they convey. Furthermore, the enabling factors for TT in non-BRIC (Brazil, Russia, India, China) developing countries have been seldom investigated, and policy recommendations to improve the level and quality of TTs to developing countries have not been adapted to the specific needs of highly heterogeneous countries, commonly denominated as “developing countries”. This thesis contributes to enriching the climate change TT debate from the perspective of a smaller emerging economy (Chile) and by undertaking a quantitative analysis of enabling factors for TT in a large sample of developing countries. Two methodological approaches are used to study climate change TT: comparative case study analysis and quantitative analysis. Comparative case studies analyse TT processes in ten cases based in Chile, all of which share the same economic, technological and policy frameworks, thus enabling us to draw conclusions on the enabling factors and obstacles operating in TT processes. The quantitative analysis uses three methodologies – principal component analysis, multiple regression analysis and cluster analysis – to assess the performance of developing countries in a number of enabling factors and the relationship between these factors and indicators of TT, as well as to create groups of developing countries with similar performances. The findings of this thesis are structured to provide responses to four main research questions: What constitutes technology transfer and how does it happen? Is it possible to measure technology transfer, and what are the main challenges in doing so? Which factors enable climate change technology transfer to developing countries? And how do different developing countries perform in these enabling factors, and how can differentiated policy priorities be defined accordingly? vi Resumen Los paises en desarrollo estan experimentando niveles de crecimiento economico sin precedentes. Como consecuencia, se espera que sean responsables de la mayor parte del futuro crecimiento global en demanda energetica y emisiones de Gases de Efecto de Invernadero (GEI). Reducir las emisiones de GEI en los paises en desarrollo es por tanto uno de los pilares de un futuro acuerdo internacional en el marco de la Convencion Marco de las Naciones Unidas para el Cambio Climatico (UNFCCC). La posibilidad de compromisos vinculantes de reduccion de emisiones de GEI ha sido rechazada por los paises en desarrollo, que perciben estos limites como frenos a su desarrollo economico y a su prioridad principal de erradicacion de la pobreza. El desarrollo, transferencia y uso de tecnologias bajas en carbono tiene connotaciones mas positivas y se percibe como la via hacia un crecimiento bajo en carbono. Hasta el momento, la UNFCCC ha tenido un exito limitado en la promocion de transferencias de tecnologia (TT) a paises en desarrollo. Esta tesis analiza las causas de este resultado y busca mejorar la comprension sobre que constituye transferencia de tecnologia en el area de cambio climatico, cuales son los factores que la facilitan en paises en desarrollo y que politicas podrian implementarse para reforzar dichos factores. A pesar del extendido reconocimiento sobre la importancia de la transferencia de tecnologia a paises en desarrollo en la agenda politica de cambio climatico, esta cuestion no ha sido suficientemente atendida por la investigacion existente. Las definiciones actuales de transferencia de tecnologia relacionada con la mitigacion del cambio climatico no tienen en cuenta la diversidad de canales por las que se manifiestan o los efectos que consiguen. Los factores facilitadores de TT en paises en desarrollo no BRIC (Brasil, Rusia, India y China) apenas han sido investigados, y las recomendaciones politicas para aumentar el nivel y la calidad de la TT no se han adaptado a las necesidades especificas de paises muy heterogeneos aglutinados bajo el denominado grupo de "paises en desarrollo". Esta tesis contribuye a enriquecer el debate sobre la TT de cambio climatico con la perspectiva de una economia emergente de pequeno tamano (Chile) y el analisis cuantitativo de factores que facilitan la TT en una amplia muestra de paises en desarrollo. Se utilizan dos metodologias para el estudio de la TT a paises en desarrollo: analisis comparativo de casos de estudio y analisis cuantitativo basado en metodos multivariantes. Los casos de estudio analizan procesos de TT en diez casos basados en Chile, para derivar conclusiones sobre los factores que facilitan u obstaculizan el proceso de transferencia. El analisis cuantitativo multivariante utiliza tres metodologias: regresion multiple, analisis de componentes principales y analisis cluster. Con dichas metodologias se busca analizar el posicionamiento de diversos paises en cuanto a factores que facilitan la TT; las relaciones entre dichos factores e indicadores de transferencia tecnologica; y crear grupos de paises con caracteristicas similares que podrian beneficiarse de politicas similares para la promocion de la transferencia de tecnologia. Los resultados de la tesis se estructuran en torno a cuatro preguntas de investigacion: .Que es la transferencia de tecnologia y como ocurre?; .Es posible medir la transferencia de tecnologias de bajo carbono?; .Que factores facilitan la transferencia de tecnologias de bajo carbono a paises en desarrollo? y .Como se puede agrupar a los paises en desarrollo en funcion de sus necesidades politicas para la promocion de la transferencia de tecnologias de bajo carbono?

Integration of cooperation for development in Survey Engineering curricula at the European Higher Education Area (EHEA) framework

Survey Engineering curricula involves the integration of many formal disciplines at a high level of proficiency. The Escuela de Ingenieros en Topografía, Cartografía y Geodesia at Universidad Politécnica de Madrid (Survey Engineering) has developed an intense and deep teaching on so-called Applied Land Sciences and Technologies or Land Engineering. However, new approaches are encouraged by the European Higher Education Area (EHEA). This fact requires a review of traditional teaching and methods. Furthermore, the new globalization and international approach gives new ways to this discipline to teach and learn about how to bridge gap between cultures and regions. This work is based in two main needs. On one hand, it is based on integration of basic knowledge and disciplines involved in typical Survey Engineering within Land Management. On the other, there is an urgent need to consider territory on a social and ethical basis, as far as a part of the society, culture, idiosyncrasy or economy. The integration of appropriate knowledge of the Land Management is typically dominated by civil engineers and urban planners. It would be very possible to integrate Survey Engineering and Cooperation for Development in the framework of Land Management disciplines. Cooperation for Development is a concept that has changed since beginning of its use until now. Development projects leave an impact on society in response to their beneficiaries and are directed towards self-sustainability. Furthermore, it is the true bridge to reduce gap between societies when differences are immeasurable. The concept of development has also been changing and nowadays it is not a purely economic concept. Education, science and technology are increasingly taking a larger role in what is meant by development. Moreover, it is commonly accepted that Universities should transfer knowledge to society, and the transfer of knowledge should be open to countries most in need for developing. If the importance of the country development is given by education, science and technology, knowledge transfer would be one of the most clear of ways of Cooperation for Development. Therefore, university cooperation is one of the most powerful tools to achieve it, placing universities as agents of development. In Spain, the role of universities as agents of development and cooperation has been largely strengthened. All about this work deals to how to implement both Cooperation for Development and Land Management within Survey Engineering at the EHEA framework.

AR modelling and DDS for in situ surveillance of capacitive pressure transmitters

In this work, a methodology is proposed to find the dynamics poles of a capacitive pressure transmitter in order to enhance and extend the on line surveillance of this type of sensors based on the response time measurement by applying noise analysis techniques and the Dynamic Data System. Several measurements have been analyzed taken from a Pressurized Water Reactor. The methodology proposes an autoregressive fit whose order is determined by the sensor dynamics poles. Nevertheless, the signals that have been analyzed, could not be filtered properly in order to remove the plant noise, thus, this was considered as an additional pair of complex conjugate poles. With this methodology we have come up with the numerical value of the sensor second real pole in spite of its low influence on the sensor dynamic response. This opens up a more accurate on line sensor surveillance since the previous methods were achieved by considering one real pole only.

Application of noise analysis for sensor surveillance in Trillo NPP

It is a known fact that noise analysis is a suitable method for sensor performance surveillance. In particular, controlling the response time of a sensor is an efficient way to anticipate failures and to have the opportunity to prevent them. In this work the response times of several sensors of Trillo NPP are estimated by means of noise analysis. The procedure applied consists of modeling each sensor with autoregressive methods and getting the searched parameter by analyzing the response of the model when a ramp is simulated as the input signal. Core exit thermocouples and in core self-powered neutron detectors are the main sensors analyzed but other plant sensors are studied as well. Since several measurement campaigns have been carried out, it has been also possible to analyze the evolution of the estimated parameters during more than one fuel cycle. Some sensitivity studies for the sample frequency of the signals and its influence on the response time are also included. Calculations and analysis have been done in the frame of a collaboration agreement between Trillo NPP operator (CNAT) and the School of Mines of Madrid.

Surveillance and diagnostics of the beam mode vibrations of the ringhlas PWRs

Surveillance of core barrel vibrations has been performed in the Swedish Ringhals PWRs for several years. This surveillance is focused mainly on the pendular motion of the core barrel, which is known as the beam mode. The monitoring of the beam mode has suggested that its amplitude increases along the cycle and decreases after refuelling. In the last 5 years several measurements have been taken in order to understand this behaviour. Besides, a non-linear fitting procedure has been implemented in order to better distinguish the different components of vibration. By using this fitting procedure, two modes of vibration have been identified in the frequency range of the beam mode. Several results coming from the trend analysis performed during these years indicate that one of the modes is due to the core barrel motion itself and the other is due to the individual flow induced vibrations of the fuel elements. In this work, the latest results of this monitoring are presented.

Polimatía prospectiva. De la incertidumbre a los sistemas complejos desde el pensamiento negativo

In opposition to the current period of upheaval and manifest limitations of the quantitative methods to develop forecasting models for reliable in medium and long term future scenarios, it is increasingly necessary turning to qualitative approaches which minimize the impact of unexpected consequences: foresight. Flexible models from the new progress on complex systems development, but seen from the other side, the negative thinking. This is an instrument that looks like so contemporary but it could be inherent to the whole interdisciplinary knowledge transfer. RESUMEN Ante el convulso panorama actual y las patentes limitaciones de los métodos cuantitativos para el desarrollo de modelos de previsión de escenarios futuros fi ables a medio y largo plazo, resulta cada vez más necesario, recurrir a planteamientos cualitativos que minimicen el impacto de las consecuencias imprevistas: la prospectiva. Modelos fl exibles procedentes de los nuevos avances en el desarrollo de los sistemas complejos, pero desde un enfoque distinto, el pensamiento negativo. Un instrumento que si bien parece ser completamente contemporáneo, sería inherente a toda transferencia interdisciplinar de conocimiento.

Un nuevo sistema de gobernanza para afrontar los retos del siglo XXI en la educación universitaria en Perú basado en el modelo de análisis de políticas

Un nuevo sistema de gobernanza para afrontar los retos del siglo XXI en la educación universitaria en Perú basado en el modelo de análisis de políticas, surge de observar el efecto de la competencia en los mercados, de la distribución de los escasos recursos según productividad y rendimiento, y de la gestión ineficiente de las universidades ya que estos parámetros están cambiando los criterios de confianza y legitimidad del sistema universitario en Perú. Las universidades se perciben más como instituciones del sector público, mientras que los servicios que ofrecen deben más bien contribuir a la modernización de la sociedad emergente y a la economía del conocimiento. Las reformas universitarias- iniciadas en los años 80 - han estado inspiradas en las organizaciones universitarias exitosas que han logrado modificar su gobernanza y van dirigidas a transformar ciertas instituciones burocráticas en organizaciones capaces de desempeñar la función de actores en esta competición global por los recursos y los mejores talentos. En este contexto, la universidad peruana se enfrenta a dos grandes desafíos: el de adaptarse a las nuevas perspectivas mundiales, y el poder dar mejor respuesta a las demandas, necesidades y expectativas de la sociedad. Un cambio en el sistema de gobernanza para la educación superior universitaria dará una solución integral a estos desafíos permitiéndole enfrentar los problemas de la universidad para su desarrollo e inserción en las corrientes mundiales. La metodología planteada en la investigación es cualitativa parte del análisis de la realidad como un TODO, sin reducirlos a sus partes integrantes, con la interpretación de los hechos, buscando entender las variables que intervienen. Se propone una política para la educación universitaria en Perú que se permeabilice a la sociedad, cambiando el modelo de planificación de un modelo de reforma social a un modelo de análisis de políticas, donde el Estado Peruano actúe como único responsable de responder a la sociedad demandante como su representante legal, y con unos organismo externo e independiente que siente las bases de la práctica, como se está haciendo en muchos modelos universitarios del mundo. Esta investigación presenta una primera fase conceptual, que aborda la evolución histórica de las universidades en el Perú, analizando y clarificando las fuerzas impulsoras a través del tiempo y distinguir las principales líneas que le imprimen dirección y sentido a los cambios de una realidad educativa universitaria. Así mismo, en esta fase se hace un análisis de la situación actual de las universidades en el Perú para llegar a determinar en qué situación se encuentra y si está preparada para enfrentar los retos de la educación universitaria mundial, para esto se analizan los modelos universitarios de mayor prestigio en el mundo. El marco teórico anterior permite sentar, en una segunda fase de la investigación, las bases científicas del modelo que se propone: el modelo de planificación de análisis de políticas para el sistema universitario peruano. Este modelo de ámbito público propuesto para la educación universitaria peruana basa su estrategia en un modelo de planificación con un objetivo común: “Mejorar la calidad de la educación superior universitaria peruana con el fin de aumentar la empleabilidad y la movilidad de los ciudadanos así como la competitividad internacional de la educación universitaria en Perú”, y con unas líneas de acción concretadas en cuatro objetivos específicos: 1) competencias (genéricas y específicas de las áreas temáticas); 2) enfoques de enseñanza, aprendizaje y evaluación; 3) créditos académicos; 4) calidad de los programa. Así como los fundamentos metodológicos del modelo de análisis de políticas, utilizado como estructura política, teniendo en cuenta las características básicas del modelo: a) Planificación desde arriba; b) Se centra en la toma de decisiones; c) Separación entre conocimiento experto y decisión; d) El estudio de los resultados orienta el proceso decisor. Finalmente, se analiza una fase de validación del modelo propuesto para la educación superior universitaria peruana, con los avances ya realizados en Perú en temas de educación superior, como es, el actual contexto de la nueva Ley Universitaria N°30220 promulgada el 8 de julio de 2014, la creación del SUNEDU y la reorganización del SINEACE, que tienen como propósito atender la crisis universitaria centrada en tres ejes principales incluidos en la ley, considerados como bases para una reforma. Primero, el Estado asume la rectoría de las políticas educativas en todos los niveles educativos. El segundo aspecto consiste en instalar un mecanismo de regulación de la calidad que junto con la reestructuración de aquellos otros existentes debieran sentar las bases para que las familias y estudiantes tengan la garantía pública de que el servicio que se ofrece, sin importar sus características particulares, presenten un mínimo común de calidad y un tercer aspecto es que la ley se reafirma en que la universidad es un espacio de construcción de conocimiento basado en la investigación y la formación integral. Las finalidades, la estructura y organización, las formas de graduación, las características del cuerpo docente, la obligatoriedad por los estudios generales, etc., indican que la reflexión académica es el centro articulador de la vida universitaria. Esta validación también se ha confrontado con los resultados de las entrevistas cualitativas a juicio de experto que se han realizado a rectores de universidades públicas y privadas así como a rectores miembros de la ex ANR, miembros de organizaciones como CONCYTEC, IEP, CNE, CONEAU, ICACIT e investigadores en educación superior, con la finalidad de analizar la sostenibilidad del modelo propuesto en el tiempo. Los resultados evidencian, que en el sistema universitario peruano se puede implementar un cambio hacía un modelo de educación superior universitaria, con una política educativa que se base en un objetivo común claramente definido, un calendario para lograrlo y un conjunto objetivos específicos, con un cambio de estructura política de reforma social a un modelo de análisis de políticas. Así mismo se muestran los distintos aspectos que los interesados en la educación superior universitaria deben considerar, si se quiere ocupar un espacio en el futuro y si interesa que la universidad peruana pueda contribuir para que la sociedad se forje caminos posibles a través de una buena docencia que se refleje en su investigación, con alumnos internacionales, sobre todo, en los postgrados; con un investigación que se traduzca en publicaciones, patentes, etc., de impacto mundial, con relevancia en la sociedad porque contribuye a su desarrollo, concretándose en trabajos de muy diversos tipos, promovidos junto con empresas, gobiernos en sus diversos niveles, instituciones públicas o privadas, etc., para que aporten financiación a la universidad. ABSTRACT A new system of governance to meet the challenges of the twenty-first century university education in Peru based on the model of policy analysis, comes to observe the effect of market competition, distribution of scarce resources according to productivity and performance, and inefficient management of universities as these parameters are changing the criteria of trust and legitimacy of the university system in Peru. Universities are perceived more as public sector institutions, while the services provided should rather contribute to the modernization of society and the emerging knowledge economy. The-university reforms initiated in the 80s - have been inspired by successful university organizations that have succeeded in changing its governance and as attempting to transform certain bureaucratic institutions into organizations that act as actors in this global competition for resources and top talent. In this context, the Peruvian university faces two major challenges: to adapt to the new global outlook, and to better respond to the demands, needs and expectations of society. A change in the system of governance for university education give a comprehensive solution to address these challenges by allowing the problems of the university development and integration into global flows. The methodology proposed in this research is qualitative part of the analysis of reality as a whole, without reducing them to their constituent parts, with the interpretation of the facts, seeking to understand the variables involved. a policy for university education in Peru that permeabilizes society is proposed changing the planning model of a model of social reform a model of policy analysis, where the Peruvian State to act as the sole responsible for responding to the applicant as its legal representative, and with external and independent body that provides the basis of practice, as is being done in many university models in the world. This research presents an initial conceptual phase, which deals with the historical development of universities in Peru, analyzing and clarifying the driving forces over time and distinguish the main lines that give direction and meaning to changes in university educational reality. Also, at this stage an analysis of the current situation of universities in Peru is done to be able to determine what the situation is and whether it is prepared to meet the challenges of the global higher education, for this university models are analyzed most prestigious in the world. The above theoretical framework allows to lay in a second phase of research, the scientific basis of the model proposed: the planning model of policy analysis for the Peruvian university system. This proposed model of public sphere for the Peruvian college bases its strategy on a planning model with a common goal: "To improve the quality of the Peruvian university education in order to enhance the employability and mobility of citizens and the international competitiveness of higher education in Peru ", and lines of action materialized in four specific objectives: 1) competences (generic and specific subject areas); 2) approaches to teaching, learning and assessment; 3) credits; 4) quality of the program. As well as the methodological foundations of policy analysis model, used as political structure, taking into account the basic characteristics of the model: a) Planning from above; b) focuses on decision making; c) Separation between expertise and decision; d) The study of the results process guides the decision maker. Finally, a validation phase of the proposed Peruvian university higher education, with the progress already made in Peru on issues of higher education model is analyzed, as is the current context of the new University Law No. 30220 promulgated on July 8 2014, the creation of SUNEDU and reorganization of SINEACE, which are intended to serve the university crisis centered on three main areas included in the law, considered as the basis for reform. First, the State assumes the stewardship of education policies at all educational levels. The second aspect is to install a mechanism for regulating the quality along with the restructuring of those existing ones should lay the foundation for families and students to guarantee that public service is offered, regardless of their individual characteristics, are of common minimum quality and a third aspect is that the law reaffirms that the university is building a space of research-based knowledge and comprehensive training. The aims, structure and organization, forms of graduation, faculty characteristics, the requirement for the general studies, etc., indicate that the academic reflection is the coordinating center of university life. This validation has also been confronted with the results of qualitative interviews with expert judgment that has been made to directors of public and private universities as well as leading members of the former ANR members of organizations like CONCYTEC, IEP, CNE, CONEAU, ICACIT and researchers in higher education, in order to analyze the sustainability of the proposed model in time. The results show, that the Peruvian university system can implement a change to a model of university education, an educational policy based on clearly defined common goal, a timetable for achieving specific objectives set and, with a change social policy structure to a model of reform policy analysis. It also shows the various aspects that those interested in university education should consider, if you want to occupy a space in the future and if interested in the Peruvian university can contribute to society possible paths is forged through research good teaching, international students, especially in graduate programs; with research that results in publications, patents, etc., global impact, relevance to society because it contributes to their development taking shape in very different types of jobs, promoted with businesses, governments at various levels, public institutions or private, etc., to provide funding to the university.

Adaptive fuzzy knowledge-based systems for control metabots' mobility on virtual environments

The confluence of three-dimensional (3D) virtual worlds with social networks imposes on software agents, in addition to conversational functions, the same behaviours as those common to human-driven avatars. In this paper, we explore the possibilities of the use of metabots (metaverse robots) with motion capabilities in complex virtual 3D worlds and we put forward a learning model based on the techniques used in evolutionary computation for optimizing the fuzzy controllers which will subsequently be used by metabots for moving around a virtual environment.

Knowledge Management and Information Systems based on Workflow Technology

Knowledge management is critical for the success of virtual communities, especially in the case of distributed working groups. A representative example of this scenario is the distributed software development, where it is necessary an optimal coordination to avoid common problems such as duplicated work. In this paper the feasibility of using the workflow technology as a knowledge management system is discussed, and a practical use case is presented. This use case is an information system that has been deployed within a banking environment. It combines common workflow technology with a new conception of the interaction among participants through the extension of existing definition languages.

Vision-based vehicle detection and tracking with a mobile camera using a statistical framework

En esta tesis se aborda la detección y el seguimiento automático de vehículos mediante técnicas de visión artificial con una cámara monocular embarcada. Este problema ha suscitado un gran interés por parte de la industria automovilística y de la comunidad científica ya que supone el primer paso en aras de la ayuda a la conducción, la prevención de accidentes y, en última instancia, la conducción automática. A pesar de que se le ha dedicado mucho esfuerzo en los últimos años, de momento no se ha encontrado ninguna solución completamente satisfactoria y por lo tanto continúa siendo un tema de investigación abierto. Los principales problemas que plantean la detección y seguimiento mediante visión artificial son la gran variabilidad entre vehículos, un fondo que cambia dinámicamente debido al movimiento de la cámara, y la necesidad de operar en tiempo real. En este contexto, esta tesis propone un marco unificado para la detección y seguimiento de vehículos que afronta los problemas descritos mediante un enfoque estadístico. El marco se compone de tres grandes bloques, i.e., generación de hipótesis, verificación de hipótesis, y seguimiento de vehículos, que se llevan a cabo de manera secuencial. No obstante, se potencia el intercambio de información entre los diferentes bloques con objeto de obtener el máximo grado posible de adaptación a cambios en el entorno y de reducir el coste computacional. Para abordar la primera tarea de generación de hipótesis, se proponen dos métodos complementarios basados respectivamente en el análisis de la apariencia y la geometría de la escena. Para ello resulta especialmente interesante el uso de un dominio transformado en el que se elimina la perspectiva de la imagen original, puesto que este dominio permite una búsqueda rápida dentro de la imagen y por tanto una generación eficiente de hipótesis de localización de los vehículos. Los candidatos finales se obtienen por medio de un marco colaborativo entre el dominio original y el dominio transformado. Para la verificación de hipótesis se adopta un método de aprendizaje supervisado. Así, se evalúan algunos de los métodos de extracción de características más populares y se proponen nuevos descriptores con arreglo al conocimiento de la apariencia de los vehículos. Para evaluar la efectividad en la tarea de clasificación de estos descriptores, y dado que no existen bases de datos públicas que se adapten al problema descrito, se ha generado una nueva base de datos sobre la que se han realizado pruebas masivas. Finalmente, se presenta una metodología para la fusión de los diferentes clasificadores y se plantea una discusión sobre las combinaciones que ofrecen los mejores resultados. El núcleo del marco propuesto está constituido por un método Bayesiano de seguimiento basado en filtros de partículas. Se plantean contribuciones en los tres elementos fundamentales de estos filtros: el algoritmo de inferencia, el modelo dinámico y el modelo de observación. En concreto, se propone el uso de un método de muestreo basado en MCMC que evita el elevado coste computacional de los filtros de partículas tradicionales y por consiguiente permite que el modelado conjunto de múltiples vehículos sea computacionalmente viable. Por otra parte, el dominio transformado mencionado anteriormente permite la definición de un modelo dinámico de velocidad constante ya que se preserva el movimiento suave de los vehículos en autopistas. Por último, se propone un modelo de observación que integra diferentes características. En particular, además de la apariencia de los vehículos, el modelo tiene en cuenta también toda la información recibida de los bloques de procesamiento previos. El método propuesto se ejecuta en tiempo real en un ordenador de propósito general y da unos resultados sobresalientes en comparación con los métodos tradicionales. ABSTRACT This thesis addresses on-road vehicle detection and tracking with a monocular vision system. This problem has attracted the attention of the automotive industry and the research community as it is the first step for driver assistance and collision avoidance systems and for eventual autonomous driving. Although many effort has been devoted to address it in recent years, no satisfactory solution has yet been devised and thus it is an active research issue. The main challenges for vision-based vehicle detection and tracking are the high variability among vehicles, the dynamically changing background due to camera motion and the real-time processing requirement. In this thesis, a unified approach using statistical methods is presented for vehicle detection and tracking that tackles these issues. The approach is divided into three primary tasks, i.e., vehicle hypothesis generation, hypothesis verification, and vehicle tracking, which are performed sequentially. Nevertheless, the exchange of information between processing blocks is fostered so that the maximum degree of adaptation to changes in the environment can be achieved and the computational cost is alleviated. Two complementary strategies are proposed to address the first task, i.e., hypothesis generation, based respectively on appearance and geometry analysis. To this end, the use of a rectified domain in which the perspective is removed from the original image is especially interesting, as it allows for fast image scanning and coarse hypothesis generation. The final vehicle candidates are produced using a collaborative framework between the original and the rectified domains. A supervised classification strategy is adopted for the verification of the hypothesized vehicle locations. In particular, state-of-the-art methods for feature extraction are evaluated and new descriptors are proposed by exploiting the knowledge on vehicle appearance. Due to the lack of appropriate public databases, a new database is generated and the classification performance of the descriptors is extensively tested on it. Finally, a methodology for the fusion of the different classifiers is presented and the best combinations are discussed. The core of the proposed approach is a Bayesian tracking framework using particle filters. Contributions are made on its three key elements: the inference algorithm, the dynamic model and the observation model. In particular, the use of a Markov chain Monte Carlo method is proposed for sampling, which circumvents the exponential complexity increase of traditional particle filters thus making joint multiple vehicle tracking affordable. On the other hand, the aforementioned rectified domain allows for the definition of a constant-velocity dynamic model since it preserves the smooth motion of vehicles in highways. Finally, a multiple-cue observation model is proposed that not only accounts for vehicle appearance but also integrates the available information from the analysis in the previous blocks. The proposed approach is proven to run near real-time in a general purpose PC and to deliver outstanding results compared to traditional methods.

Knowledge pipeline in freight pipeline industry: competence- based model for open innovation

There is growing concern over the challenges for innovation in Freight Pipeline industry. Since the early works of Chesbrough a decade ago, we have learned a lot about the content, context and process of open innovation. However, much more research is needed in Freight Pipeline Industry. The reality is that few corporations have institutionalized open innovation practices in ways that have enabled substantial growth or industry leadership. Based on this, we pursue the following question: How does a firm’s integration into knowledge networks depend on its ability to manage knowledge? A competence-based model for freight pipeline organizations is analysed, this model should be understood by any organization in order to be successful in motivating professionals who carry out innovations and play a main role in collaborative knowledge creation processes. This paper aims to explain how can open innovation achieve its potential in most Freight Pipeline Industries.

SMA-Based Muscle-Like Actuation in Biologically Inspired Robots: A State of the Art Review

New actuation technology in functional or "smart" materials has opened new horizons in robotics actuation systems. Materials such as piezo-electric fiber composites, electro-active polymers and shape memory alloys (SMA) are being investigated as promising alternatives to standard servomotor technology [52]. This paper focuses on the use of SMAs for building muscle-like actuators. SMAs are extremely cheap, easily available commercially and have the advantage of working at low voltages. The use of SMA provides a very interesting alternative to the mechanisms used by conventional actuators. SMAs allow to drastically reduce the size, weight and complexity of robotic systems. In fact, their large force-weight ratio, large life cycles, negligible volume, sensing capability and noise-free operation make possible the use of this technology for building a new class of actuation devices. Nonetheless, high power consumption and low bandwidth limit this technology for certain kind of applications. This presents a challenge that must be addressed from both materials and control perspectives in order to overcome these drawbacks. Here, the latter is tackled. It has been demonstrated that suitable control strategies and proper mechanical arrangements can dramatically improve on SMA performance, mostly in terms of actuation speed and limit cycles.

A knowledge-based method for generating summaries of spatial movement in geographic areas

In this article we describe a method for automatically generating text summaries of data corresponding to traces of spatial movement in geographical areas. The method can help humans to understand large data streams, such as the amounts of GPS data recorded by a variety of sensors in mobile phones, cars, etc. We describe the knowledge representations we designed for our method and the main components of our method for generating the summaries: a discourse planner, an abstraction module and a text generator. We also present evaluation results that show the ability of our method to generate certain types of geospatial and temporal descriptions.