A regional comparison of the effects of climate change on agricultural crops in Europe

The effects of climate change will be felt by most farmers in Europe over the next decades. This study provides consistent results of the impact of climate change on arable agriculture in Europe by using high resolution climate data, socio-economic data, and impact assessment models, including farmer adaptation. All scenarios are consistent with the spatial distribution of effects, exacerbating regional disparities and current vulnerability to climate. Since the results assume no restrictions on the use of water for irrigation or on the application of agrochemicals, they may be considered optimistic from the production point of view and somewhat pessimistic from the environmental point of view. The results provide an estimate of the regional economic impact of climate change, as well as insights into the importance of mitigation and adaptation policies.

Mealiness Detection in Agricultural Crops: Destructive and Nondestructive Tests: A Review

Mealiness is known as an important internal quality attribute of fruits/vegetables, which has significant influence on consumer purchasing decisions. Mealiness has been a topic of research interest over the past several decades. A number of destructive and nondestructive techniques are introduced for mealiness detection. Nondestructive methods are more interesting because they are rapid, noninvasive, and suitable for real-time purposes. In this review, the concept of mealiness is presented for potato, apple, and peach, followed by an in-depth discussion about applications of destructive and nondestructive techniques developed for mealiness detection. The results suggest the potential of electromagnetic-based techniques for nondestructive mealiness evaluation. Further investigations are in progress to find more appropriate nondestructive techniques as well as cost and performance.

Fungal microbiota from rain water and pathogenicity of Fusarium species isolated from atmospheric dust and rainfall dust

In order to determine the presence of Fusarium spp. in atmospheric dust and rainfall dust, samples were collected during September 2007, and July, August, and October 2008. The results reveal the prevalence of airborne Fusarium species coming from the atmosphere of the South East coast of Spain. Five different Fusarium species were isolated from the settling dust: Fusarium oxysporum, F. solani, F. equiseti, F. dimerum, and F. proliferatum. Moreover, rainwater samples were obtained during significant rainfall events in January and February 2009. Using the dilution-plate method, 12 fungal genera were identified from these rainwater samples. Specific analyses of the rainwater revealed the presence of three species of Fusarium: F. oxysporum, F. proliferatum and F. equiseti. A total of 57 isolates of Fusarium spp. obtained from both rainwater and atmospheric rainfall dust sampling were inoculated onto melon (Cucumis melo L.) cv. Piñonet and tomato (Lycopersicon esculentum Mill.) cv. San Pedro. These species were chosen because they are the main herbaceous crops in Almeria province. The results presented in this work indicate strongly that spores or propagules of Fusarium are able to cross the continental barrier carried by winds from the Sahara (Africa) to crop or coastal lands in Europe. Results show differences in the pathogenicity of the isolates tested. Both hosts showed root rot when inoculated with different species of Fusarium, although fresh weight measurements did not bring any information about the pathogenicity. The findings presented above are strong indications that long-distance transmission of Fusarium propagules may occur. Diseases caused by species of Fusarium are common in these areas. They were in the past, and are still today, a problem for greenhouses crops in Almería, and many species have been listed as pathogens on agricultural crops in this region. Saharan air masses dominate the Mediterranean regions. The evidence of long distance dispersal of Fusarium spp. by atmospheric dust and rainwater together with their proved pathogenicity must be taken into account in epidemiological studies.

Compromisos en la adaptación a distintos huéspedes en virus de plantas

Los patógenos han desarrollado estrategias para sobrevivir en su entorno, infectar a sus huéspedes, multiplicarse dentro de estos y posteriormente transmitirse a otros huéspedes. Todos estos componentes hacen parte de la eficacia biológica de los patógenos, y les permiten ser los causantes de enfermedades infecciosas tanto en hombres y animales, como en plantas. El proceso de infección produce efectos negativos en la eficacia biológica del huésped y la gravedad de los efectos, dependerá de la virulencia del patógeno. Por su parte, el huésped ha desarrollado mecanismos de respuesta en contra del patógeno, tales como la resistencia, por la que reduce la multiplicación del patógeno, o la tolerancia, por la que disminuye el efecto negativo de la infección. Estas respuestas del huésped a la infección producen efectos negativos en la eficacia biológica del patógeno, actuando como una presión selectiva sobre su población. Si la presión selectiva sobre el patógeno varía según el huésped, se predice que un mismo patógeno no podrá aumentar su eficacia biológica en distintos huéspedes y estará más adaptado a un huésped y menos a otro, disminuyendo su gama de huéspedes. Esto supone que la adaptación de un patógeno a distintos huéspedes estará a menudo dificultada por compromisos (trade-off) en diferentes componentes de la eficacia biológica del patógeno. Hasta el momento, la evidencia de compromisos de la adaptación del patógeno a distintos huéspedes no es muy abundante, en lo que se respecta a los virus de plantas. En las últimas décadas, se ha descrito un aumento en la incidencia de virus nuevos o previamente descritos que producen enfermedades infecciosas con mayor gravedad y/o diferente patogenicidad, como la infección de huéspedes previamente resistentes. Esto se conoce como la emergencia de enfermedades infecciosas y está causada por patógenos emergentes, que proceden de un huésped reservorio donde se encuentran adaptados. Los huéspedes que actúan como reservorios pueden ser plantas silvestres, que a menudo presentan pocos síntomas o muy leves a pesar de estar infectados con diferentes virus, y asimismo se encuentran en ecosistemas con ninguna o poca intervención humana. El estudio de los factores ecológicos y biológicos que actúan en el proceso de la emergencia de enfermedades infecciosas, ayudará a entender sus causas para crear estrategias de prevención y control. Los virus son los principales patógenos causales de la emergencia de enfermedades infecciosas en humanos, animales y plantas y un buen modelo para entender los procesos de la emergencia. Asimismo, las plantas a diferencia de los animales, son huéspedes fáciles de manipular y los virus que las afectan, más seguros para el trabajo en laboratorio que los virus de humanos y animales, otros modelos también usados en la investigación. Por lo tanto, la interacción virus – planta es un buen modelo experimental para el estudio de la emergencia de enfermedades infecciosas. El estudio de la emergencia de virus en plantas tiene también un interés particular, debido a que los virus pueden ocasionar pérdidas económicas en los cultivos agrícolas y poner en riesgo la durabilidad de la resistencia de plantas mejoradas, lo que supone un riesgo en la seguridad alimentaria con impactos importantes en la sociedad, comparables con las enfermedades infecciosas de humanos y animales domésticos. Para que un virus se convierta en un patógeno emergente debe primero saltar desde su huésped reservorio a un nuevo huésped, segundo adaptarse al nuevo huésped hasta que la infección dentro de la población de éste se vuelva independiente del reservorio y finalmente debe cambiar su epidemiología. En este estudio, se escogió la emergencia del virus del mosaico del pepino dulce (PepMV) en el tomate, como modelo experimental para estudiar la emergencia de un virus en una nueva especie de huésped, así como las infecciones de distintos genotipos del virus del moteado atenuado del pimiento (PMMoV) en pimiento, para estudiar la emergencia de un virus que aumenta su patogenicidad en un huésped previamente resistente. El estudio de ambos patosistemas nos permitió ampliar el conocimiento sobre los factores ecológicos y evolutivos en las dos primeras fases de la emergencia de enfermedades virales en plantas. El PepMV es un patógeno emergente en cultivos de tomate (Solanum lycopersicum) a nivel mundial, que se describió primero en 1980 infectando pepino dulce (Solanum muricatum L.) en Perú, y casi una década después causando una epidemia en cultivos de tomate en Holanda. La introducción a Europa posiblemente fue a través de semillas infectadas de tomate procedentes de Perú, y desde entonces se han descrito nuevos aislados que se agrupan en cuatro cepas (EU, LP, CH2, US1) que infectan a tomate. Sin embargo, el proceso de su emergencia desde pepino dulce hasta tomate es un interrogante de gran interés, porque es uno de los virus emergentes más recientes y de gran importancia económica. Para la emergencia de PepMV en tomate, se recolectaron muestras de tomate silvestre procedentes del sur de Perú, se analizó la presencia y diversidad de aislados de PepMV y se caracterizaron tanto biológicamente (gama de huéspedes), como genéticamente (secuencias genomicas). Se han descrito en diferentes regiones del mundo aislados de PMMoV que han adquirido la capacidad de infectar variedades previamente resistentes de pimiento (Capsicum spp), es decir, un típico caso de emergencia de virus que implica la ampliación de su gama de huéspedes y un aumento de patogenicidad. Esto tiene gran interés, ya que compromete el uso de variedades resistentes obtenidas por mejora genética, que es la forma de control de virus más eficaz que existe. Para estudiar la emergencia de genotipos altamente patogénicos de PMMoV, se analizaron clones biológicos de PMMoV procedentes de aislados de campo cuya patogenicidad era conocida (P1,2) y por mutagénesis se les aumentó la patogenicidad (P1,2,3 y P1,2,3,4), introduciendo las mutaciones descritas como responsables de estos fenotipos. Se analizó si el aumento de la patogenicidad conlleva un compromiso en la eficacia biológica de los genotipos de PMMoV. Para ello se evaluaron diferentes componentes de la eficacia biológica del virus en diferentes huéspedes con distintos alelos de resistencia. Los resultados de esta tesis demuestran: i). El potencial de las plantas silvestres como reservorios de virus emergentes, en este caso tomates silvestres del sur de Perú, así como la existencia en estas plantas de aislados de PepMV de una nueva cepa no descrita que llamamos PES. ii) El aumento de la gama de huéspedes no es una condición estricta para la emergencia de los virus de plantas. iii) La adaptación es el mecanismo más probable en la emergencia de PepMV en tomate cultivado. iv) El aumento de la patogenicidad tiene un efecto pleiotrópico en distintos componentes de la eficacia biológica, así mismo el signo y magnitud de este efecto dependerá del genotipo del virus, del huésped y de la interacción de estos factores. ABSTRACT host Pathogens have evolved strategies to survive in their environment, infecting their hosts, multiplying inside them and being transmitted to other hosts. All of these components form part of the pathogen fitness, and allow them to be the cause of infectious diseases in humans, animals, and plants. The infection process produces negative effects on the host fitness and the effects severity will depend on the pathogen virulence. On the other hand, hosts have developed response mechanisms against pathogens such as resistance, which reduces the growth of pathogens, or tolerance, which decreases the negative effects of infection. T he se responses of s to infection cause negative effects on the pathogen fitness, acting as a selective pressure on its population. If the selective pressures on pathogens va ry according to the host s , probably one pathogen cannot increase its fitness in different hosts and will be more adapted to one host and less to another, decreasing its host range. This means that the adaptation of one pathogen to different hosts , will be often limited by different trade - off components of biological effectiveness of pathogen. Nowadays , trade - off evidence of pathogen adaptation to different hosts is not extensive, in relation with plant viruses. In last decades, an increase in the incidence of new or previously detected viruses has been described, causing infectious diseases with increased severity and/or different pathogenicity, such as the hosts infection previously resistants. This is known as the emergence of infectious diseases and is caused by emerging pathogens that come from a reservoir host where they are adapted. The hosts which act as reservoirs can be wild plants, that often have few symptoms or very mild , despite of being infected with different viruses, and being found in ecosystems with little or any human intervention. The study of ecological and biological factors , acting in the process of the infectious diseases emergence will help to understand its causes to create strategies for its prevention and control. Viruses are the main causative pathogens of the infectious diseases emergence in humans, animals and plants, and a good model to understand the emergency processes. Likewise, plants in contrast to animals are easy host to handle and viruses that affect them, safer for laboratory work than viruses of humans and animals, another models used in research. Therefore, the interaction plant-virus is a good experimental model for the study of the infectious diseases emergence. The study of virus emergence in plants also has a particular interest, because the viruses can cause economic losses in agricultural crops and threaten the resistance durability of improved plants, it suppose a risk for food security with significant impacts on society, comparable with infectious diseases of humans and domestic animals. To become an emerging pathogen, a virus must jump first from its reservoir host to a new host, then adapt to a new host until the infection within the population becomes independent from the reservoir, and finally must change its epidemiology. In this study, the emergence of pepino mosaic virus (PepMV) in tomato, was selected as experimental model to study the emergence of a virus in a new host specie, as well as the infections of different genotypes of pepper mild mottle virus (PMMoV) in pepper, to study the emergence of a virus that increases its pathogenicity in a previously resistant host. The study of both Pathosystems increased our knowledge about the ecological and evolutionary factors in the two first phases of the emergence of viral diseases in plants. The PepMV is an emerging pathogen in tomato (Solanum lycopersicum L.) in the world, which was first described in 1980 by infecting pepino (Solanum muricatum L.) in Peru, and almost after a decade caused an epidemic in tomato crops in Netherlands. The introduction to Europe was possibly through infected tomato seeds from Peru, and from then have been described new isolates that are grouped in four strains (EU, LP, CH2, US1) that infect tomato. However, the process of its emergence from pepino up tomato is a very interesting question, because it is one of the newest emerging viruses and economically important. For the PepMV emergence in tomato, wild tomato samples from southern Peru were collected, and the presence and diversity of PepMV isolates were analyzed and characterized at biological (host range) and genetics (genomic sequences) levels. Isolates from PMMoV have been described in different world regions which have acquired the ability to infect pepper varieties that were previously resistants (Capsicum spp), it means, a typical case of virus emergence which involves the host range extension and an increased pathogenicity. This is of great interest due to involve the use of resistant varieties obtained by breeding, which is the most effective way to control virus. To study the emergence of highly pathogenic genotypes of PMMoV, biological clones from field isolates whose pathogenicity was known were analyzed (P1,2) and by mutagenesis we increased its pathogenicity (P1,2,3 and P1,2, 3,4), introducing the mutations described as responsible for these phenotypes. We analyzed whether the increased pathogenicity involves a trade-off in fitness of PMMoV genotypes. For this aim, different components of virus fitness in different hosts with several resistance alleles were evaluated. The results of this thesis show: i). The potential of wild plants as reservoirs of emerging viruses, in this case wild tomatoes in southern Peru, and the existence in these plants of PepMV isolates of a new undescribed strain that we call PES. ii) The host range expansion is not a strict condition for the plant virus emergence. iii) The adaptation is the most likely mechanism in the PepMV emergence in cultivated tomato. iv) The increased pathogenicity has a pleiotropic effect on several fitness components, besides the sign and magnitude of this effect depends on the virus genotype, the host and the interaction of both.

Optimización de la aplicación de lodos de depuración de aguas residuales al abonado o mejora de suelos

El objetivo de este trabajo de investigación fue evaluar el efecto de la aplicación de lodos residuales procedentes de una planta de tratamiento de aguas residuales acondicionados como biosólido para el abonado de tres cultivos agrícolas. Esto se realizó a través del estudio de las variables de producción (desarrollo vegetal de cada cultivo) y de la comparación de las características de los suelos utilizados antes y después de los ensayos experimentales. A través de la investigación se confirmó la mejora en la calidad del suelo y mejor rendimiento de cultivo debido a los biosólidos procedentes de tratamiento de aguas residuales. Este trabajo de investigación de tipo descriptivo y experimental, utilizó lodos optimizados que fueron aplicados a tres cultivos agrícolas de ciclo corto. Fueron evaluados dos cultivos (sandía y tomate) bajo riego y un cultivo (arroz) en secano. En la primera fase del trabajo se realizó la caracterización de los lodos, para ellos se realizaron pruebas físico químicas y microbiológicas. Fue utilizado el método de determinación de metales por espectrometría de emisión atómica de plasma acoplado inductivamente, (ICP-AES) para conocer las concentraciones de metales. La caracterización microbiológica para coliformes totales y fecales se realizó utilizando la técnica del Número más probable (NMP), y para la identificación de organismos patógenos se utilizó el método microbiológico propuesto por Kornacki & Johnson (2001), que se fundamenta en dos procesos: pruebas presuntivas y prueba confirmativa. Tanto los resultados para la determinación de metales y elementos potencialmente tóxicos; como las pruebas para la determinación de microorganismos potencialmente peligrosos, estuvieron por debajo de los límites considerados peligrosos establecidos por la normativa vigente en Panama (Reglamento Técnico COPANIT 47-2000). Una vez establecido la caracterización de los lodos, se evalúo el potencial de nutrientes (macro y micro) presentes en los biosólidos para su potencial de uso como abono en cultivos agrícolas. El secado de lodos fue realizado a través de una era de secado, donde los lodos fueron deshidratados hasta alcanzar una textura pastosa. “La pasta de lodo” fue transportada al área de los ensayos de campo para continuar el proceso de secado y molida. Tres ensayos experimentales fueron diseñados al azar con cinco tratamientos y cuatro repeticiones para cada uno de los tres cultivos: sandía, tomate, arroz, en parcelas de 10m2 (sandía y tomate) y 20 m2 (arroz) para cada tratamiento. Tres diferentes dosis de biosólidos fueron evaluadas y comparadas con un tratamiento de fertilizante comercial y un tratamiento control. La dosis de fertilizante comercial utilizada en cada cultivo fue la recomendada por el Instituto de Investigación Agropecuaria de Panamá. Los ensayos consideraron la caracterización inicial del suelo, la preparación del suelo, semilla, y arreglo topográfico de los cultivos siguiendo las recomendaciones agronómicas de manejo de cultivo establecida por el Instituto de Investigación Agropecuaria. Para los ensayos de sandía y tomate se instaló el sistema de riego por goteo. Se determinaron los ácidos húmicos presentes en los cultivos, y se estudiaron las variables de desarrollo de cada cultivo (fructificación, cosecha, peso de la cosecha, dimensiones de tamaño y color de las frutas, rendimiento, y la relación costo – rendimiento). También se estudiaron las variaciones de los macro y micro nutrientes y las variaciones de pH, textura de suelo y MO disponible al inicio y al final de cada uno de los ensayos de campo. Todas las variables y covariables fueron analizadas utilizando el programa estadístico INFOSAT (software para análisis estadístico de aplicación general) mediante el análisis de varianza, el método de comparaciones múltiples propuesto por Fisher (LSD Fisher) para comparar las medias de los cultivares y el coeficiente de correlación de Pearson que nos permite analizar si existe una asociación lineal entre dos variables. En la evaluación de los aportes del biosólido a los cultivos se observó que los macronutrientes N y P se encontraban de los límites requeridos en cada uno de los cultivos, pero que los niveles de K estuvieron por debajo de los requerimientos de los cultivos. A nivel de la fertilización tradicional con fertilizante químico se observó que la dosis recomendada para cada uno de los cultivos del estudio estaba sobreestimada en los tres principales macronutrientes: Nitrógeno, Fosforo y Potasio. Contenían concentraciones superiores de N, P y K a las requeridas teóricamente por el cultivo. El nutriente que se aporta en exceso es el Fósforo. Encontramos que para el cultivo de sandía era 18 veces mayor a lo requerido por el cultivo, en tomate fue 12 veces mayor y en el cultivo de arroz, 34 veces mayor. El fertilizante comercial tuvo una influencia en el peso final y rendimiento final en cada uno de los cultivos del estudio. A diferencia, los biosólidos tuvieron una influencia directa en el desarrollo de los cultivos (germinación, coloración, tamaño, longitud, diámetro, floración y resistencia a enfermedades). Para el caso de la sandía la dosis de biosólido más cercana al óptimo para el cultivo es la mayor dosis aplicada en este ensayo (97.2 gramos de biosólido por planta). En el caso de tomate, el fertilizante comercial obtuvo los mejores valores, pero las diferencias son mínimas con relación al tratamiento T1, de menor dosis de biosólido (16.2 gramos de biosólido por planta). Los resultados generales del ensayo de tomate estuvieron por debajo del rendimiento esperado para el cultivo. Los tratamientos de aplicación de biosólidos aportaron al desarrollo del cultivo en las variables tamaño, color y resistencia a las enfermedades dentro del cultivo de tomate. Al igual que el tomate, en el caso del arroz, el tratamiento comercial obtuvo los mejores resultados. Los resultados finales de peso y rendimiento del cultivo indican que el tratamiento (T2), menor dosis de biosólido (32.4 gramos por parcela), no tuvo diferencias significativas con los resultados obtenidos en las parcelas con aplicación de fertilizante comercial (T1). El tratamiento T4 (mayor dosis de biosólido) obtuvo los mejores valores para las variables germinación, ahijamiento y espigamiento del cultivo, pero al momento de la maduración obtuvo los menores resultados. Los biosólidos aportan nutrientes a los cultivos y al final del ensayo se observó que permanecen disponibles en el suelo, aportando a la mejora del suelo final. En los tres ensayos, se pudo comprobar que los aportes de los biosólidos en el desarrollo vegetativo de los cultivos. También se encontró en todos los ensayos que no hubo diferencias significativas (p > 0.05) entre los tratamientos de biosólidos y fertilizante comercial. Para obtener mejores resultados en estos tres ensayos se requeriría que a la composición de biosólidos (utilizada en este ensayo) se le adicione Potasio, Calcio y Magnesio en las cantidades requeridas por cada uno de los cultivos. ABSTRACT The objective of this investigation was to evaluate the effect of residual sewage sludge obtained from the residual water of a treatment plant conditioned as Biosolid used on three reliable agricultural crops. The effect of the added sewage sludge was evaluated through the measurement of production variables such as crop plant development and the comparison of the soil characteristics used before and after the experimental tests. This investigation confirmed that biosolids from wastewater treatment can contribute to the growth of these crops. In this experimental approach, optimized sludge was applied to three short-cycle crops including two low-risk crops (watermelon and tomato) and one high-risk crop (rice) all grown on dry land. In the first phase of work, the characteristics of the sludge were assessed using chemical, physical and microbiological tests. The concentrations of metals were determined by atomic emission spectrometry inductively coupled plasma, (ICP-AES). Microbiological characterization was performed measuring total coliform and fecal count using the most probable number technique (NMP) and microbiological pathogens were identified using Kornacki & Johnson (2001) method based on two processes: presumptive and confirmatory tests. Both the results for the determination of metals and potentially toxic elements, as testing for the determination of potentially dangerous microorganisms were below the limits established by the applicable standard in Panama (Technical Regulate COPANIT 47-2000). After the metal and bacterial characterization of the sludge, the presence of macro or micronutrients in biosolids was measured to evaluate its potential for use as fertilizer in the growth of agricultural crops. The sludge was dehydrated via a drying process into a muddy slurry. The pulp slurry was transported to the field trial area to continue the process of drying and grinding. Three randomized experimental trials were designed to test with five treatment regimens and four replications for each of the crops: watermelon, tomato, rice. The five treatment regimens evaluated were three different doses of bio solid with commercial fertilizer treatment control and no fertilizer treatment control. Treatment areas for the watermelon and tomato were 10m2 plots land and for rice was 20m2. The amount of commercial fertilizer used to treat each crop was based on the amount recommended by Agricultural Research Institute of Panama. The experimental trials considered initial characterization of soil, soil preparation, seed, and crop topographical arrangement following agronomic crop management recommendations. For the tests evaluating the growth of watermelons and tomatoes and drip irrigation system was installed. The amount of humic acids present in the culture were determined and developmental variable of each crop were studied (fruiting crop harvest weight, size dimensions and color of the fruit, performance and cost effectiveness). Changes in macro and micronutrients and changes in pH, soil texture and OM available were measured at the beginning and end of each field trial. All variables and covariates were analyzed using INFOSAT statistical program (software for statistical analysis of general application) by analysis of variance, multiple comparisons method as proposed by Fisher (LSD Fisher) to compare the means of cultivars and the Pearson ratio that allows us to analyze if there is a linear association between two variables. In evaluating the contribution of biosolids to agricultural crops, the study determined that the macronutrients N & P were within the requirements of crops, but K levels were below the requirements of crops. In terms of traditional chemical fertilizer fertilization, we observed that the recommended dose for each study crop was overestimated for the three major nutrients: nitrogen, phosphorus and potassium. Higher concentrations containing N, P and K to the theoretically required by the crop. The recommended dose of commercial fertilizer for crops study contained greater amounts of phosphorus, crops that need. The level of phosphorous was found to be18 times greater than was required for the cultivation of watermelon; 12 times higher than required for tomato, and 34 times higher than required for rice cultivation. Phosphorus inputs of commercial fertilizer were a primary influence on the weight and performance of each crop. Unlike biosolids had a direct influence on crop development (germination, color, size, length, diameter, flowering and disease resistance). In the case of growth of watermelons, the Biosolid dose closest to the optimum for cultivation was applied the highest dose in this assay (97.2 grams of bio solids per plant). In the case of tomatoes, commercial fertilizer had the best values but the differences were minimal when compared to treatment T1, the lower dose of sewage sludge (Biosolid 16.2 grams per plant). The overall results for the tomato crop yield of the trial were lower than expected. Additionally, the application of biosolids treatment contributed to the development of fruit of variable size, color and disease resistance in the tomato crops. Similar to the tomato crop, commercial fertilizer treatment provided the best results for the rice crop. The final results of weight and crop yield for rice indicated that treatment with T2 amount of biosolids (34.2 grams per plot) was not significantly different from the result obtained in the application plot given commercial fertilizer (T1). The T4 (higher dose of bio solid) treatment had the best values for the germination, tillering and bolting variables of the rice crop but for fruit ripening yielded lower results. In all three trials, biosolids demonstrated the ability to contribute in the vegetative growth of crops. It was also found in all test no significant differences (p>0.05) between treatment of bio solid and commercial fertilizer. Biosolids provided nutrients to the crops and even at the end of the trial remained available in the ground soil, contributing to the improvement of the final ground. The best results from these three trials is that the use of bio solids such as those used in this assay would require the addition of potassium, calcium and magnesium in quantities required for each crop.

Onomástica, ecología y territorio. La toponimia de La Rioja como indicador biogeográfico y de la dinámica del paisaje forestal

Se presenta un trabajo de investigación toponímica en La Rioja con enfoque geobotánico. La premisa de partida es que la toponimia relacionada con especies y agrupaciones vegetales, productos forestales y usos del suelo proporciona información valiosa sobre la corología y la dinámica de la vegetación al ser clasificada y analizada con criterios biogeográficos y ecológicos. Se ha elegido la región riojana como zona piloto, al concurrir distintos tipos fisonómicos de vegetación y un conjunto muy diverso de comunidades vegetales representativas del paisaje peninsular. Se añade una larga historia de usos agrícolas en la llanura del Ebro que contrasta con la predominante actividad forestal en las zonas montañosas, en particular la potenciación de los pastos para ganadería trashumante. La Rioja tiene carácter de encrucijada no sólo fitocorológica: es también tierra de fronteras políticas y transiciones lingüísticas. En el léxico y la toponimia conviven variantes puras del castellano, rasgos del romance navarro-aragonés, elementos genuinos de una variante medieval riojana, palabras mozárabes y un numeroso y significativo elenco de topónimos de origen vasco. El trabajo se inicia con unas consideraciones epistemológicas. Se establece un planteamiento de la Toponimia como ciencia interdisciplinar, la etiología de los nombres geográficos, así como su valor apelativo descriptor de los atributos del paisaje. Se enumeran los condicionantes metodológicos de la investigación toponímica y se desarrolla una reflexión sobre las particularidades de la toponimia geobotánica. Se dedica un epígrafe a reseñar estudios precedentes de toponimia botánica y ecológica y el estado actual de conocimientos sobre la toponimia de La Rioja. La delimitación superficial de los parajes designados por los nombres geográficos es clave para un análisis orientado a detectar la correspondencia entre los elementos aludidos por el topónimo y las especies y comunidades vegetales. Las áreas de distribución y presencia, así como las transformaciones del paisaje, quedan definidas en superficies acotadas territorialmente. La metodología seguida se basa en la revisión exhaustiva de fuentes toponímicas ya existentes; destacadamente, los datos procedentes de la cartografía del Castro de Rústica, adscritos a polígonos con dimensión espacial. Las denominaciones de las parcelas catastrales se han complementado con los nombres geográficos del Diccionario de Toponimia Actual de La Rioja (DTALR) (González Blanco, 1987), el nomenclátor NomGeo del IGN, y algunas recopilaciones toponímicas municipales. De la base de datos conjunta se han seleccionado los topónimos con significado geobotánico. Se propone una taxonomía de grupos semánticos basada en categorías de estructura (arbolado, matorral, cubiertas herbáceas y áreas de vegetación escasa o rala) y en la adscripción a tipos de vegetación potencialmente dominantes, ordenados según una escala de higrofilia decreciente). También se reseñan topónimos referentes a usos y aprovechamientos en el medio rural: dehesas, ganadería, productos forestales y algunos cultivos agrícolas. El trabajo reúne en un repertorio sistemático los datos toponímicos, acopiados por comarcas y términos municipales. Se incluye la relación de nombres geográficos encontrados por campos nocionales y se comentan los nombres vernáculos que les han dado origen y su etimología. Quedan señalados los topónimos georreferenciados y asignados a entidades superficiales en la cartografía digital catastral, que se ha superpuesto a mapas forestales a escalas 1:200.000 y 1:50.000, en cuya elaboración participamos. El análisis ha permitido definir “topónimo externo” como el recinto catastral en que la especie o agrupación aludida no tiene presencia en la vegetación actual, al menos como dominante. Los topónimos externos más significativos de cada grupo han sido analizados describiendo la cubierta vegetal actual correspondiente, lo que permite interpretar, junto con las características fisiográficas del paraje, las causas posibles de ausencia del elemento aludido, teniendo en cuenta criterios generales de mesología, de dinámica de la vegetación y de la historia de la acción humana. El trabajo se cierra con un capítulo de conclusiones generales, conceptuales y metodológicas, así como una relación de líneas de profundización de la investigación que quedan apuntadas. Se completa con una relación de fuentes y referencias bibliográficas fundamentales. ABSTRACT This paper presents a study of the toponymy of La Rioja with a specific focus on place names reflecting the region’s geobotany. Its underlying premise is that the toponymy associated with plant species and communities, forest products and land uses can provide valuable information about the chorology and vegetation dynamics when classified and analysed using biogeographical and ecological criteria. La Rioja has been chosen for this pilot study because it concentrates vegetation types of distinct physiognomy and a highly diverse set of plant communities that can be considered representative of the vegetation of the peninsula’s landscapes. This combines with a long history of different agricultural uses on the Ebro plain that contrast with the predominance of forestry activity in the more mountainous areas, in particular the promotion of pasture for livestock transhumance. Indeed, La Rioja is not only a crossroads in terms of its phytochorology, but it is also a land of political boundaries and language transitions. Coexisting in its lexicon and toponymy, we find pure Castilian variants, features from the Romance language of Navarro-Aragonese, genuine elements of the medieval variant of the Riojan dialect, words of Mozarabic and a large and significant list of place names of Basque origin. The paper begins by outlining a number of epistemological considerations and establishes an interdisciplinary approach to toponymy, the aetiology of geographical names, and their value in the descriptive naming of the features of a landscape. It continues by enumerating the methodological determinants of toponymic research and reflects on the specific characteristics of geobotanical toponyms. The next section is dedicated to examining previous studies of botanical and ecological place names and providing a state-of-the-art review of the toponymy of La Rioja. Delimiting the sites designated by the geographical names is essential to any analysis designed to detect the correspondence between the elements alluded to by the toponyms and plant species and communities. These areas of distribution and presence, as well as the landscape changes, are defined in terms of spatially delimited surface areas. The methodology adopted involves an exhaustive review of existing toponymic sources; in particular, data obtained from the maps of the Rustic Cadastre, assigned to spatial polygons. The names of these cadastral parcels are complemented by the geographical names taken from the Diccionario de Toponimia Actual de La Rioja (DTALR) (González Blanco, 1987); the gazetteer – NomGeo, published by Spain’s Instituto Geográfico Nacional; and, various municipal list of toponyms. Place names with a geobotanical meaning were then selected from this joint database. The paper proposes a taxonomy of semantic groups based on structural categories (namely wooded areas, brushland, grassy areas and areas of scanty or sparse vegetation) and assignment to the potentially dominant type of vegetation (ordered on a scale of decreasing hygrophilic trends). Place names referring to land uses and practices in rural areas – including, pasture, livestock, forest products and some agricultural crops – are also described. The study produces a systematic list of toponyms ordered by counties and municipalities. The geographical names are organised by notional fields and the vernacular names that have given rise to them and their etymology are discussed. The toponyms are georeferenced and assigned to surface elements on the digital cadastral map, superimposed on forest maps at scales of 1:200,000 and 1:50,000, in the production of which the authors participated. The analysis has allowed us to define “external toponyms” as those cadastral parcels in which the plant species or group alluded to is no longer present in the vegetation, at least as the dominant type. The most significant external toponyms in each group have been analysed by describing the corresponding, present-day vegetation cover, which allows us to interpret, along with the physiographic features of the site, the possible causes of the absence of the aforementioned element, bearing in mind general criteria of mesology, vegetation dynamics and the history of human action. The paper finishes by offering a number of general conceptual and methodological conclusions, and a list of areas that future research can usefully examine. The study is supplemented with a list of sources and key references.

Automatic segmentation of relevant textures in agricultural images

One important issue emerging strongly in agriculture is related with the automatization of tasks, where the optical sensors play an important role. They provide images that must be conveniently processed. The most relevantimage processing procedures require the identification of green plants, in our experiments they come from barley and corn crops including weeds, so that some types of action can be carried out, including site-specific treatments with chemical products or mechanical manipulations. Also the identification of textures belonging to the soil could be useful to know some variables, such as humidity, smoothness or any others. Finally, from the point of view of the autonomous robot navigation, where the robot is equipped with the imaging system, some times it is convenient to know not only the soil information and the plants growing in the soil but also additional information supplied by global references based on specific areas. This implies that the images to be processed contain textures of three main types to be identified: green plants, soil and sky if any. This paper proposes a new automatic approach for segmenting these main textures and also to refine the identification of sub-textures inside the main ones. Concerning the green identification, we propose a new approach that exploits the performance of existing strategies by combining them. The combination takes into account the relevance of the information provided by each strategy based on the intensity variability. This makes an important contribution. The combination of thresholding approaches, for segmenting the soil and the sky, makes the second contribution; finally the adjusting of the supervised fuzzy clustering approach for identifying sub-textures automatically, makes the third finding. The performance of the method allows to verify its viability for automatic tasks in agriculture based on image processing

Mapping wide row crops with video sequences acquired from a tractor moving at treatment speed

This paper presents a mapping method for wide row crop fields. The resulting map shows the crop rows and weeds present in the inter-row spacing. Because field videos are acquired with a camera mounted on top of an agricultural vehicle, a method for image sequence stabilization was needed and consequently designed and developed. The proposed stabilization method uses the centers of some crop rows in the image sequence as features to be tracked, which compensates for the lateral movement (sway) of the camera and leaves the pitch unchanged. A region of interest is selected using the tracked features, and an inverse perspective technique transforms the selected region into a bird’s-eye view that is centered on the image and that enables map generation. The algorithm developed has been tested on several video sequences of different fields recorded at different times and under different lighting conditions, with good initial results. Indeed, lateral displacements of up to 66% of the inter-row spacing were suppressed through the stabilization process, and crop rows in the resulting maps appear straight

Residual effect of organic zinc complexes in acid and calcareous soils on navy bean (phaseolus vulgaris l.) and flax (linum usitatissimum l.) crops under greenhouse conditions. Influence of the moisture conditions = Efecto residual de complejos orgánicos de zinc en suelos ácido y calizo en cultivos de judía (phaseolus vulgaris l.) y lino (linum usitatissimum l.) Realizados en condiciones de invernadero. Influencia de las diferentes condiciones de humedad

El Zn es un elemento esencial para el crecimiento saludable y reproducción de plantas, animales y humanos. La deficiencia de Zn es una de las carencias de micronutrientes más extendidas en muchos cultivos, afectando a grandes extensiones de suelos en diferentes áreas agrícolas. La biofortificación agronómica de diferentes cultivos, incrementando la concentración de micronutriente Zn en la planta, es un medio para evitar la deficiencia de Zn en animales y humanos. Tradicionalmente se han utilizado fertilizantes de Zn inorgánicos, como el ZnSO4, aunque en los últimos años se están utilizado complejos de Zn como fuentes de este micronutriente, obteniéndose altas concentraciones de Zn soluble y disponible en el suelo. Sin embargo, el envejecimiento de la fuente en el suelo puede causar cambios importantes en su disponibilidad para las plantas. Cuando se añaden al suelo fuentes de Zn inorgánicas, las formas de Zn más solubles pierden actividad y extractabilidad con el paso del tiempo, transformándose a formas más estables y menos biodisponibles. En esta tesis se estudia el efecto residual de diferentes complejos de Zn de origen natural y sintético, aplicados en cultivos previos de judía y lino, bajo dos condiciones de riego distintas (por encima y por debajo de la capacidad de campo, respectivamente) y en dos suelos diferentes (ácido y calizo). Los fertilizantes fueron aplicados al cultivo previo en tres dosis diferentes (0, 5 y 10 mg Zn kg-1 suelo). El Zn fácilmente lixiviable se estimó con la extracción con BaCl2 0,1M. Bajo condiciones de humedad por encima de la capacidad de campo se obtuvieron mayores porcentajes de Zn lixiviado en el suelo calizo que en el suelo ácido. En el caso del cultivo de judía realizado en condiciones de humedad por encima de la capacidad de campo se compararon las cantidades extraídas con el Zn lixiviado real. El análisis de correlación entre el Zn fácilmente lixiviable y el estimado sólo fue válido para complejos con alta movilidad y para cada suelo por separado. Bajo condiciones de humedad por debajo de la capacidad de campo, la concentración de Zn biodisponible fácilmente lixiviable presentó correlaciones positivas y altamente significativas con la concentración de Zn disponible en el suelo. El Zn disponible se estimó con varios métodos de extracción empleados habitualmente: DTPA-TEA, DTPA-AB, Mehlich-3 y LMWOAs. Estas concentraciones fueron mayores en el suelo ácido que en el calizo. Los diferentes métodos utilizados para estimar el Zn disponible presentaron correlaciones positivas y altamente significativas entre sí. La distribución del Zn en las distintas fracciones del suelo fue estimada con diferentes extracciones secuenciales. Las extracciones secuenciales mostraron un descenso entre los dos cultivos (el anterior y el actual) en la fracción de Zn más lábil y un aumento en la concentración de Zn asociado a fracciones menos lábiles, como carbonatos, óxidos y materia orgánica. Se obtuvieron correlaciones positivas y altamente significativas entre las concentraciones de Zn asociado a las fracciones más lábiles (WSEX y WS+EXC, experimento de la judía y lino, respectivamente) y las concentraciones de Zn disponible, estimadas por los diferentes métodos. Con respecto a la planta se determinaron el rendimiento en materia seca y la concentración de Zn en planta. Se observó un aumento del rendimiento y concentraciones con el efecto residual de la dosis mayores (10 mg Zn kg-1) con respecto a la dosis inferior (5 mg Zn 12 kg-1) y de ésta con respecto a la dosis 0 (control). El incremento de la concentración de Zn en todos los tratamientos fertilizantes, respecto al control, fue mayor en el suelo ácido que en el calizo. Las concentraciones de Zn en planta indicaron que, en el suelo calizo, serían convenientes nuevas aplicaciones de Zn en posteriores cultivos para mantener unas adecuadas concentraciones en planta. Las mayores concentraciones de Zn en la planta de judía, cultivada bajo condiciones de humedad por encima de la capacidad de campo, se obtuvieron en el suelo ácido con el efecto residual del Zn-HEDTA a la dosis de 10 mg Zn kg-1 (280,87 mg Zn kg-1) y en el suelo calizo con el efecto residual del Zn-DTPA-HEDTA-EDTA a la dosis de 10 mg Zn kg-1 (49,89 mg Zn kg-1). En el cultivo de lino, cultivado bajo condiciones de humedad por debajo de la capacidad de campo, las mayores concentraciones de Zn en planta ese obtuvieron con el efecto residual del Zn-AML a la dosis de 10 mg Zn kg-1 (224,75 mg Zn kg-1) y en el suelo calizo con el efecto residual del Zn-EDTA a la dosis de 10 mg Zn kg-1 (99,83 mg Zn kg-1). El Zn tomado por la planta fue determinado como combinación del rendimiento y de la concentración en planta. Bajo condiciones de humedad por encima de capacidad de campo, con lixiviación, el Zn tomado por la judía disminuyó en el cultivo actual con respecto al cultivo anterior. Sin embargo, en el cultivo de lino, bajo condiciones de humedad por debajo de la capacidad de campo, se obtuvieron cantidades de Zn tomado superiores en el cultivo actual con respecto al anterior. Esta tendencia también se observó, en ambos casos, con el porcentaje de Zn usado por la planta. Summary Zinc is essential for healthy growth and reproduction of plants, animals and humans. Zinc deficiency is one of the most widespread micronutrient deficiency in different crops, and affect different agricultural areas. Agronomic biofortification of crops produced by an increased of Zn in plant, is one way to avoid Zn deficiency in animals and humans Sources with inorganic Zn, such as ZnSO4, have been used traditionally. Although, in recent years, Zn complexes are used as sources of this micronutrient, the provide high concentrations of soluble and available Zn in soil. However, the aging of the source in the soil could cause significant changes in their availability to plants. When an inorganic source of Zn is added to soil, Zn forms more soluble and extractability lose activity over time, transforming into forms more stable and less bioavailable. This study examines the residual effect of different natural and synthetic Zn complexes on navy bean and flax crops, under two different moisture conditions (above and below field capacity, respectively) and in two different soils (acid and calcareous). Fertilizers were applied to the previous crop in three different doses (0, 5 y 10 mg Zn kg-1 soil). The easily leachable Zn was estimated by extraction with 0.1 M BaCl2. Under conditions of moisture above field capacity, the percentage of leachable Zn in the calcareous soil was higher than in acid soil. In the case of navy bean experiment, performed in moisture conditions of above field capacity, amounts extracted of easily leachable Zn were compared with the real leachable Zn. Correlation analysis between the leachable Zn and the estimate was only valid for complex with high mobility and for each soil separately. Under moisture conditions below field capacity, the concentration of bioavailable easily leachable Zn showed highly significant positive correlations with the concentration of available soil Zn. The available Zn was estimated with several commonly used extraction methods: DTPA-TEA, AB-DTPA, Mehlich-3 and LMWOAs. These concentrations were higher in acidic soil than in the calcareous. The different methods used to estimate the available Zn showed highly significant positive correlations with each other. The distribution of Zn in the different fractions of soil was estimated with different sequential extractions. The sequential extractions showed a decrease between the two crops (the previous and current) at the most labile Zn fraction and an increase in the concentration of Zn associated with the less labile fractions, such as carbonates, oxides and organic matter. A positive and highly significant correlation was obtained between the concentrations of Zn associated with more labile fractions (WSEX and WS + EXC, navy bean and flax experiments, respectively) and available Zn concentrations determined by the different methods. Dry matter yield and Zn concentration in plants were determined in plant. Yield and Zn concentration in plant were higher with the residual concentrations of the higher dose applied (10 mg Zn kg-1) than with the lower dose (5 mg Zn kg-1), also these parameters showed higher values with application of this dose than with not Zn application. The increase of Zn concentration in plant with Zn treatments, respect to the control, was greater in the acid soil than in the calcareous. The Zn concentrations in plant indicated that in the calcareous soil, new applications of Zn are desirable in subsequent crops to maintain suitable concentrations in plant. 15 The highest concentrations of Zn in navy bean plant, performed under moisture conditions above the field capacity, were obtained with the residual effect of Zn-HEDTA at the dose of 10 mg Zn kg-1 (280.87 mg Zn kg-1) in the acid soil, and with the residual effect of Zn- DTPA-HEDTA-EDTA at a dose of 10 mg Zn kg-1 (49.89 mg Zn kg-1) in the calcareous soil. In the flax crop, performed under moisture conditions below field capacity, the highest Zn concentrations in plant were obtained with the residual effect of Zn-AML at the dose of 10 mg Zn kg-1 (224.75 Zn mg kg-1) and with the residual effect of Zn-EDTA at a dose of 10 mg Zn kg-1 (99.83 mg Zn kg-1) in the calcareous soil. The Zn uptake was determined as a combination of yield and Zn concentration in plant. Under moisture conditions above field capacity, with leaching, Zn uptake by navy bean decreased in the current crop, respect to the previous crop. However, in the flax crop, under moisture conditions below field capacity, Zn uptake was higher in the current crop than in the previous. This trend is also observed in both cases, with the percentage of Zn used by the plant

The role of cover crops in irrigated systems: water balance, nitrate leaching and soil mineral nitrogen accumulation

Soil salinity and salt leaching are a risk for sustainable agricultural production in many irrigated areas. This study was conducted over 3.5 years to determine how replacing the usual winter fallow with a cover crop (CC) affects soil salt accumulation and salt leaching in irrigated systems. Treatments studied during the period between summer crops were: barley (Hordeum vulgare L.), vetch (Vicia villosa L.) and fallow. Soil water content was monitored daily to a depth of 1.3 m and used with the numerical model WAVE to calculate drainage. Electrical conductivity (EC) was measured in soil solutions periodically, and in the soil saturated paste extracts before sowing CC and maize. Salt leaching was calculated multiplying drainage by total dissolved salts in the soil solution, and use to obtain a salt balance. Total salt leaching over the four winter fallow periods was 26 Mg ha−1, whereas less than 18 Mg ha−1 in the presence of a CC. Periods of salt gain occurred more often in the CC than in the fallow. By the end of the experiment, net salt losses occurred in all treatments, owing to occasional periods of heavy rainfall. The CC were more prone than the fallow to reduce soil salt accumulation during the early growth stages of the subsequent cash crop.

The role of cover crops in irrigated systems: Soil salinity and salt leaching

Soil salinity and salt leaching are a risk for sustainable agricultural production in many irrigated areas. This study was conducted over 3.5 years to determine how replacing the usual winter fallow with a cover crop (CC) affects soil salt accumulation and salt leaching in irrigated systems. Treatments studied during the period between summer crops were: barley (Hordeum vulgare L.), vetch (Vicia villosa L.) and fallow. Soil water content was monitored daily to a depth of 1.3 m and used with the numerical model WAVE to calculate drainage. Electrical conductivity (EC) was measured in soil solutions periodically, and in the soil saturated paste extracts before sowing CC and maize. Salt leaching was calculated multiplying drainage by total dissolved salts in the soil solution, and use to obtain a salt balance. Total salt leaching over the four winter fallow periods was 26 Mg ha−1, whereas less than 18 Mg ha−1 in the presence of a CC. Periods of salt gain occurred more often in the CC than in the fallow. By the end of the experiment, net salt losses occurred in all treatments, owing to occasional periods of heavy rainfall. The CC were more prone than the fallow to reduce soil salt accumulation during the early growth stages of the subsequent cash crop.

Sum Insured Determination for Cereal, Citrus and Vineyards in the Spanish Agricultural Insurance System.

In general, insurance is a form of risk management used to hedge against a contingent loss. The conventional definition is the equitable transfer of a risk of loss from one entity to another in exchange for a premium or a guaranteed and quantifiable small loss to prevent a large and possibly devastating loss being agricultural insurance a special line of property insurance. Agriculture insurance, as actually are designed in the Spanish scenario, were established in 1978. At the macroeconomic insurance studies scale, it is necessary to know a basic element for the insurance actuarial components: sum insured. When a new risk assessment has to be evaluated in the insurance framework, it is essential to determinate venture capital in the total Spanish agriculture. In this study, three different crops (cereal, citrus and vineyards) cases are showed to determinate sum insured as they are representative of the cases found in the Spanish agriculture. Crop sum insured is calculated by the product of crop surface, unit surface production and crop price insured. In the cereal case, winter as spring cereal sowing, represents the highest Spanish crop surface, above to 6 millions of hectares (ha). Meanwhile, the four citrus species (oranges, mandarins, lemons and grapefruits) occupied an extension just over 275.000 ha. On the other hand, vineyard target to wine process shows almost one million of ha in Spain.

Impacts of the EU Biofuel Target on Agricultural Markets and Land Use - A Comparative Modelling Assessment

The Renewable Energy Directive (2009/28/EC) requires that 20% of the EU's energy needs should come from renewable sources by 2020, and includes a target for the transport sector of 10% from biofuels. This report analyses and discusses the global impacts of this biofuel target on agricultural production, markets and land use, as simulated by three agricultural sector models, AGLINK-COSIMO, ESIM and CAPRI. The impacts identified include higher EU production of ethanol and biodiesel, and of the crops used to produce them, as well as more imports of both biofuels. Trade flows of biofuel feedstocks also change to reflect greater EU demand, including a significant increase in vegetable oil imports. However, as the extra demand is small in world market terms, the impact on world market prices is limited. With the EU biofuel target, global use of land for crop cultivation is higher by 5.2 million hectares. About one quarter is area within the EU, some of which would otherwise have left agriculture.

Calibration of WAVE in irrigated maize: fallow vs. cover crops.

Nitrate leaching decreases crop available N and increases water contamination. Replacing fallow by cover crops (CC) is an alternative to reduce nitrate contamination, because it reduces overall drainage and soil mineral N accumulation. A study of the soil N and nitrate leaching was conducted during 5 years in a semi-arid irrigated agricultural area of Central Spain. Three treatments were studied during the intercropping period of maize (Zea mays L.): barley (Hordeum vulgare L.), vetch (Vicia villosa L.), and fallow. Cover crops, sown in October, were killed by glyphosate application in March, allowing direct seeding of maize in April. All treatments were irrigated and fertilised following the same procedure. Soil water content was measured using capacity probes. Soil Nmin accumulation was determined along the soil profile before sowing and after harvesting maize. Soil analysis was conducted at six depths every 0.20m in each plot in samples from 0 to 1.2-m depth. The mechanistic water balance model WAVE was applied in order to calculate drainage and plant growth of the different treatments, and apply them to the N balance. We evaluated the water balance of this model using the daily soil water content measurements of this field trial. A new Matlab version of the model was evaluated as well. In this new version improvements were made in the solute transport module and crop module. In addition, this new version is more compatible with external modules for data processing, inverse calibration and uncertainty analysis than the previous Fortran version. The model showed that drainage during the irrigated period was minimized in all treatments, because irrigation water was adjusted to crop needs, leading to nitrate accumulation on the upper layers after maize harvest. Then, during the intercrop period, most of the nitrate leaching occurred. Cover crops usually led to a shorter drainage period, lower drainage water amount and lower nitrate leaching than the treatment with fallow. These effects resulted in larger nitrate accumulation in the upper layers of the soil after CC treatments.

Meta-analysis of strategies to control nitrate leaching in irrigated agricultural systems and their effects on crop yield.

Nitrate leaching (NL) is an important N loss process in irrigated agriculture that imposes a cost on the farmer and the environment. A meta-analysis of published experimental results from agricultural irrigated systems was conducted to identify those strategies that have proven effective at reducing NL and to quantify the scale of reduction that can be achieved. Forty-four scientific articles were identified which investigated four main strategies (water and fertilizer management, use of cover crops and fertilizer technology) creating a database with 279 observations on NL and 166 on crop yield. Management practices that adjust water application to crop needs reduced NL by a mean of 80% without a reduction in crop yield. Improved fertilizer management reduced NL by 40%, and the best relationship between yield and NL was obtained when applying the recommended fertilizer rate. Replacing a fallow with a non-legume cover crop reduced NL by 50% while using a legume did not have any effect on NL. Improved fertilizer technology also decreased NL but was the least effective of the selected strategies. The risk of nitrate leaching from irrigated systems is high, but optimum management practices may mitigate this risk and maintain crop yields while enhancing environmental sustainability.