Local relevancy evaluation in the accreditation bodies for engineering master's programs

Accreditation models in the international context mainly consider the evaluation of learning outcomes and the ability of programs (or higher education institutions) to achieve the educational objectives stated in their mission. However, it is not clear if these objectives and therefore their outcomes satisfy real national and regional needs, a critical point in engineering master's programs, especially in developing countries. The aim of this paper is to study the importance of the local relevancy evaluation of these programs and to analyze the main models of quality assurance and accreditation bodies of USA, Europe and Latin America, in order to ascertain whether the relevancy is evaluated or not. After a literature review, we found that in a free-market economic context and international education, the accreditation of master’s programs follows an international accreditation model, and doesn´t take in account in most cases criteria and indicators for local relevancy. It concludes that it is necessary both, international accreditation to ensure the effectiveness of the program (achievement of learning outcomes) and the national accreditation through which it could ensure local relevancy of programs, for which we are giving some indicators.

The influence of transparency on self-evaluation as part of the university accreditation process in Peru.

In order to show the choice of transparency as the guiding principle of the accreditation process, the article evaluates its influence on the fundamental subprocess of self-evaluation, thereby confirming that transparency is an essential tool for continuous improvement of academic processes and those of educational quality management. It fosters educational innovation and permits the sustainability of the continuous accreditation process over time, resulting in greater probabilities of university self-regulation through systemization of the process, with the objective of continuous improvement of university degree programs. The article analyzes the influence of transparency on each activity of the self-evaluation process according to the Peruvian accreditation model prepared under the total quality approach, as a reference for other accreditation models, proposing concrete transparency actions and evaluating its influence on the stakeholder groups in the self-evaluation process, as well as on the efficiency and effectiveness of the process. It is concluded that transparency has a positive influence on the training of human capital and the formation of the university?s organizational culture, facilitating dissemination, understanding and involvement of the stakeholder groups in the continuous improvement of accreditation activities and increasing their acceptance of change and commitment to the process. It is confirmed that transparency contributes toward increasing the efficiency index of the self-evaluation process by reducing operating costs through adequate, accessible, timely contribution of information by the stakeholders and through the optimization of the time spent gathering relevant information. In addition, it is concluded that transparency contributes toward increasing the effectiveness index of self-evaluation by facilitating the achievement of its objectives through synthetic, useful, reliable interpretation of the education situation and the formulation of feasible improvement plans based on the adequacy, relevance, visibility, pertinence and truthfulness of the information analyzed.

Local relevance evaluation in the accreditation bodies for engineering masters programs

Accreditation models in the international context mainly consider the evaluation of learning outcomes and the ability of programs (or higher education institutions) to achieve the educational objectives stated in their mission. However, it is not clear if these objectives and therefore their outcomes satisfy real national and regional needs, a critical point in engineering master's programs, especially in developing countries. The aim of this paper is to study the importance of the local relevancy evaluation of these programs and to analyze the main models of quality assurance and accreditation bodies of USA, Europe and Latin America, in order to ascertain whether the relevancy is evaluated or not. After a literature review, we found that in a free-market economic context and international education, the accreditation of master's programs follows an international accreditation model, and doesńt take in account in most cases criteria and indicators for local relevancy. It concludes that it is necessary both, international accreditation to ensure the effectiveness of the program (achievement of learning outcomes) and the national accreditation through which it could ensure local relevancy of programs, for which we are giving some indicators.

Herramientas para la Docencia en Automática Orientadas hacia la Metodología ECTS

En los últimos años se han desarrollado una amplia variedad de herramientas educativas para la docencia. En especial, los laboratorios virtuales y remotos, como medios de educación, se van imponiendo en varios campos de la docencia. La teoría de control no está ajena a este desarrollo y son cada día más las universidades que implementan estas herramientas con el objetivo de optimizar sus recursos. Por ello, en esta tesis, se realiza un análisis de varias de las plataformas de laboratorios virtuales y remotos actuales. Este estudio sirvió de base para la implementación del Sistema de Laboratorios a Distancia (SLD). El Sistema de Laboratorios a Distancia tiene como ventajas fundamentales la independencia entre las estaciones de trabajo y el servidor, lo que permite que se puedan compartir recursos entre lugares distantes, a través de Internet. Además, la posibilidad de tener más de una estación de trabajo, con la misma práctica, controladas por el mismo servidor, lo que le brinda un mayor paralelismo. Por último, mencionar el hecho de permitir la realización de prácticas en tiempo real. En esta tesis se detalla la implementación de las prácticas remotas para el Sistema de Laboratorios a Distancia usadas en la asignatura de Regulación Automática durante los cursos 2008-2009 al 2010-2011. Estas prácticas fueron utilizadas, además de para las actividades prácticas de laboratorio, en el desarrollo de un proyecto de control, actividad ejecutada por los alumnos con un alto valor formativo. También se describen los trabajos prácticos desarrollados en el curso mediante el uso de AulaWeb. Se propone una metodología que se nutre de los resultados de cada curso con vistas a su mejoramiento. La realización de prácticas de forma presencial y remota permite combinar las ventajas de ambos métodos. La realización presencial de prácticas en el laboratorio tiene un gran valor formativo para los alumnos, permitiéndole conocer y manipular los equipos físicos con los que trabaja. Una vez que el alumno está familiarizado con los sistemas que utiliza puede trabajar con ellos a distancia, con las ventajas que ello conlleva de puesta a punto de los equipos y optimización de los recursos. El tiempo efectivo de uso de los sistemas físicos suele ser reducido, ya que la programación y captura de datos suele requerir entre 10 y 20 minutos. La realización de trabajos a distancia ahorra tiempo para el alumno a la vez que favorece el uso compartido de recursos. Otro aspecto de interés que surge al realizar actividades remotas es que no se limita el tiempo de utilización de los equipos, los alumnos pueden manipularlos sin restricciones de tiempo hasta que consideren que han alcanzado los objetivos deseados. La metodología aplicada permite la adquisición de competencias en los alumnos, específicamente las competencias para diseñar y ejecutar experimentos de control; así como analizar críticamente sus resultados. Todo desde un punto de vista de trabajo en equipo, y de forma colaborativa haciendo uso de las herramientas educativas AulaWeb y el Sistema de Laboratorios a Distancia (SLD) para la implementación de los experimentos remotos sobre equipos reales. Esta tesis se ajusta y da respuesta a los objetivos definidos como prioritarios por la Escuela Técnica Superior de Ingenieros Industriales de la Universidad Politécnica de Madrid en sus líneas de prioritarias para la Innovación Educativa. De igual forma cumple con el modelo educativo de la Universidad Politécnica de Madrid (Plan de eficiencia educativa), así como con las recomendaciones sobre competencias del Consejo de Acreditación de Ingeniería y Tecnología (Accreditation Board for Engineering and Technology, ABET). Se analizan los datos recogidos mediante la observación participante, las encuestas y las entrevistas grupales por cada curso académico en los que se realizó la investigación, y se proponen los cambios y mejoras para el próximo período académico. De igual forma se exponen los resultados de los alumnos en los tres cursos que duró la investigación. Esta investigación se ha desarrollado en el marco de dos proyectos de Innovación Educativa financiados por la Universidad Politécnica de Madrid. Además, ha formado parte del Programa de Cooperación Universitaria Institucional (IUC) de la Universidad Central “Marta Abreu” de Las Villas (UCLV) con el Consejo de Universidades Flamencas (VLIR).

The Effect That Project Management Certification Has on Employability: Agent's Perceptions from Spain

This study analyses the effects that the project management certification has on employability. This analysis started with a participative process in which various groups of experts who are involved in the certification of people were consulted. A personal interview was carried out amongst 106 professionals —certifying bodies, training institutions, the civil service, and international organisations— and amongst professional who are certified in project management by the International Project Management Association in Spain. The results show that the certification emerges as a powerful tool for improving employability. The effects are demonstrated across two complementary aspects: internal company aspects and external aspects relating to the labour market. Finally, by compiling the different agents’ opinions, a series of measures emerge for improving the accreditation processes as an employability tool and increasing the mutual learning between public and private actors.

Generic competences in engineering field: a comparative study between Latin America and European Union

In this work, a comparison between the competences codes in the CDIÓs* curriculum, the ones defined for the Tunning Project and the International Project Management Association (IPMA) is made. The goal is to define the most appropriate competences codes for the engineering education in Latin America. The CDIO code is obtained from the engineering practice, and responds to the Accreditation Board for Engineering and Technology (ABET) standards of accreditation. The Tuning competences are the ones defined for Latin America and the IPMÁs are international competences for project management. It is the first time that the competences defined in ABET accreditation standards in the engineering field are compared with the international competences according to IPMÁs model. The results give evidence that, in first place, there is a need to apply holistic models in the definition of an engineering curriculum. Second, the pertinence of these models in the definition of engineering programs in Latin America.

Methods and Tools for Objective Assessment of Psychomotor Skills in Laparoscopic Surgery

Training and assessment paradigms for laparoscopic surgical skills are evolving from traditional mentor–trainee tutorship towards structured, more objective and safer programs. Accreditation of surgeons requires reaching a consensus on metrics and tasks used to assess surgeons’ psychomotor skills. Ongoing development of tracking systems and software solutions has allowed for the expansion of novel training and assessment means in laparoscopy. The current challenge is to adapt and include these systems within training programs, and to exploit their possibilities for evaluation purposes. This paper describes the state of the art in research on measuring and assessing psychomotor laparoscopic skills. It gives an overview on tracking systems as well as on metrics and advanced statistical and machine learning techniques employed for evaluation purposes. The later ones have a potential to be used as an aid in deciding on the surgical competence level, which is an important aspect when accreditation of the surgeons in particular, and patient safety in general, are considered. The prospective of these methods and tools make them complementary means for surgical assessment of motor skills, especially in the early stages of training. Successful examples such as the Fundamentals of Laparoscopic Surgery should help drive a paradigm change to structured curricula based on objective parameters. These may improve the accreditation of new surgeons, as well as optimize their already overloaded training schedules.

Virtual 3D Support Contents Oriented to Interactive Self-Learning

In the educational project described in this paper, new virtual 3D didactical contents have been developed to achieve specific outcomes, within the frame of a new methodology oriented to objectives of the European Higher Education Area directives. The motivation of the project was to serve as a new assessment method, to create a link between new programs of study with the older ones. In this project, new rubrics have been developed to be employed as an objective method of evaluation of specific and transversal outcomes, to accomplish the certification criteria of institutions like ABET (Accreditation Board for Engineering and Technology).

Competencias genericas en ingeniería: un estudio comparado en el contexto internacional

En este trabajo se comparan las codificaciones de competencias del Plan de estudios de CDIO (Conceive, Desing, Implement and Operate systems in the enterprise and societal context) con las definidas por el Proyecto Tuning y las de IPMA (International Project Management Asociation). También se determina el tipo de aprendizaje más apropiado para lograr la adquisición de competencias en la formación de los ingenieros y se revisa la evolución de los programas de ingeniería industrial en Perú, España y EE.UU para definir las competencias específicas aplicables al caso peruano. La codificación de CDIO responde a los estándares de acreditación de ABET (Accreditation Board for Engineering and Technology) y las competencias del Proyecto Tuning son las definidas para Latinoamérica. Se comparan las competencias definidas en los estándares de acreditación ABET en el ámbito de las ingenierías, con las competencias internacionales según el modelo IPMA. Los resultados evidencian la necesidad de aplicar modelos holísticos que abarquen competencias técnicas, contextuales y de comportamiento en los planes de estudio de ingeniería, su pertinencia para la definición de programas de ingeniería en Latinoamérica y la posibilidad de definir un plan de estudios de ingeniería industrial con una estrategia de aprendizaje apropiada.

Conceptual framework for the design, implementation and validation of psychomotor skills’ assessment systems in minimally invasive surgery

Las técnicas de cirugía de mínima invasión (CMI) se están consolidando hoy en día como alternativa a la cirugía tradicional, debido a sus numerosos beneficios para los pacientes. Este cambio de paradigma implica que los cirujanos deben aprender una serie de habilidades distintas de aquellas requeridas en cirugía abierta. El entrenamiento y evaluación de estas habilidades se ha convertido en una de las mayores preocupaciones en los programas de formación de cirujanos, debido en gran parte a la presión de una sociedad que exige cirujanos bien preparados y una reducción en el número de errores médicos. Por tanto, se está prestando especial atención a la definición de nuevos programas que permitan el entrenamiento y la evaluación de las habilidades psicomotoras en entornos seguros antes de que los nuevos cirujanos puedan operar sobre pacientes reales. Para tal fin, hospitales y centros de formación están gradualmente incorporando instalaciones de entrenamiento donde los residentes puedan practicar y aprender sin riesgos. Es cada vez más común que estos laboratorios dispongan de simuladores virtuales o simuladores físicos capaces de registrar los movimientos del instrumental de cada residente. Estos simuladores ofrecen una gran variedad de tareas de entrenamiento y evaluación, así como la posibilidad de obtener información objetiva de los ejercicios. Los diferentes estudios de validación llevados a cabo dan muestra de su utilidad; pese a todo, los niveles de evidencia presentados son en muchas ocasiones insuficientes. Lo que es más importante, no existe un consenso claro a la hora de definir qué métricas son más útiles para caracterizar la pericia quirúrgica. El objetivo de esta tesis doctoral es diseñar y validar un marco de trabajo conceptual para la definición y validación de entornos para la evaluación de habilidades en CMI, en base a un modelo en tres fases: pedagógica (tareas y métricas a emplear), tecnológica (tecnologías de adquisición de métricas) y analítica (interpretación de la competencia en base a las métricas). Para tal fin, se describe la implementación práctica de un entorno basado en (1) un sistema de seguimiento de instrumental fundamentado en el análisis del vídeo laparoscópico; y (2) la determinación de la pericia en base a métricas de movimiento del instrumental. Para la fase pedagógica se diseñó e implementó un conjunto de tareas para la evaluación de habilidades psicomotoras básicas, así como una serie de métricas de movimiento. La validación de construcción llevada a cabo sobre ellas mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. Adicionalmente, los resultados obtenidos en la validación de apariencia fueron en general positivos en todos los grupos considerados (noveles, residentes, expertos). Para la fase tecnológica, se introdujo el EVA Tracking System, una solución para el seguimiento del instrumental quirúrgico basado en el análisis del vídeo endoscópico. La precisión del sistema se evaluó a 16,33ppRMS para el seguimiento 2D de la herramienta en la imagen; y a 13mmRMS para el seguimiento espacial de la misma. La validación de construcción con una de las tareas de evaluación mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. La validación concurrente con el TrEndo® Tracking System por su parte presentó valores altos de correlación para 8 de las 9 métricas analizadas. Finalmente, para la fase analítica se comparó el comportamiento de tres clasificadores supervisados a la hora de determinar automáticamente la pericia quirúrgica en base a la información de movimiento del instrumental, basados en aproximaciones lineales (análisis lineal discriminante, LDA), no lineales (máquinas de soporte vectorial, SVM) y difusas (sistemas adaptativos de inferencia neurodifusa, ANFIS). Los resultados muestran que en media SVM presenta un comportamiento ligeramente superior: 78,2% frente a los 71% y 71,7% obtenidos por ANFIS y LDA respectivamente. Sin embargo las diferencias estadísticas medidas entre los tres no fueron demostradas significativas. En general, esta tesis doctoral corrobora las hipótesis de investigación postuladas relativas a la definición de sistemas de evaluación de habilidades para cirugía de mínima invasión, a la utilidad del análisis de vídeo como fuente de información y a la importancia de la información de movimiento de instrumental a la hora de caracterizar la pericia quirúrgica. Basándose en estos cimientos, se han de abrir nuevos campos de investigación que contribuyan a la definición de programas de formación estructurados y objetivos, que puedan garantizar la acreditación de cirujanos sobradamente preparados y promocionen la seguridad del paciente en el quirófano. Abstract Minimally invasive surgery (MIS) techniques have become a standard in many surgical sub-specialties, due to their many benefits for patients. However, this shift in paradigm implies that surgeons must acquire a complete different set of skills than those normally attributed to open surgery. Training and assessment of these skills has become a major concern in surgical learning programmes, especially considering the social demand for better-prepared professionals and for the decrease of medical errors. Therefore, much effort is being put in the definition of structured MIS learning programmes, where practice with real patients in the operating room (OR) can be delayed until the resident can attest for a minimum level of psychomotor competence. To this end, skills’ laboratory settings are being introduced in hospitals and training centres where residents may practice and be assessed on their psychomotor skills. Technological advances in the field of tracking technologies and virtual reality (VR) have enabled the creation of new learning systems such as VR simulators or enhanced box trainers. These systems offer a wide range of tasks, as well as the capability of registering objective data on the trainees’ performance. Validation studies give proof of their usefulness; however, levels of evidence reported are in many cases low. More importantly, there is still no clear consensus on topics such as the optimal metrics that must be used to assess competence, the validity of VR simulation, the portability of tracking technologies into real surgeries (for advanced assessment) or the degree to which the skills measured and obtained in laboratory environments transfer to the OR. The purpose of this PhD is to design and validate a conceptual framework for the definition and validation of MIS assessment environments based on a three-pillared model defining three main stages: pedagogical (tasks and metrics to employ), technological (metric acquisition technologies) and analytical (interpretation of competence based on metrics). To this end, a practical implementation of the framework is presented, focused on (1) a video-based tracking system and (2) the determination of surgical competence based on the laparoscopic instruments’ motionrelated data. The pedagogical stage’s results led to the design and implementation of a set of basic tasks for MIS psychomotor skills’ assessment, as well as the definition of motion analysis parameters (MAPs) to measure performance on said tasks. Validation yielded good construct results for parameters such as time, path length, depth, average speed, average acceleration, economy of area and economy of volume. Additionally, face validation results showed positive acceptance on behalf of the experts, residents and novices. For the technological stage the EVA Tracking System is introduced. EVA provides a solution for tracking laparoscopic instruments from the analysis of the monoscopic video image. Accuracy tests for the system are presented, which yielded an average RMSE of 16.33pp for 2D tracking of the instrument on the image and of 13mm for 3D spatial tracking. A validation experiment was conducted using one of the tasks and the most relevant MAPs. Construct validation showed significant differences for time, path length, depth, average speed, average acceleration, economy of area and economy of volume; especially between novices and residents/experts. More importantly, concurrent validation with the TrEndo® Tracking System presented high correlation values (>0.7) for 8 of the 9 MAPs proposed. Finally, the analytical stage allowed comparing the performance of three different supervised classification strategies in the determination of surgical competence based on motion-related information. The three classifiers were based on linear (linear discriminant analysis, LDA), non-linear (support vector machines, SVM) and fuzzy (adaptive neuro fuzzy inference systems, ANFIS) approaches. Results for SVM show slightly better performance than the other two classifiers: on average, accuracy for LDA, SVM and ANFIS was of 71.7%, 78.2% and 71% respectively. However, when confronted, no statistical significance was found between any of the three. Overall, this PhD corroborates the investigated research hypotheses regarding the definition of MIS assessment systems, the use of endoscopic video analysis as the main source of information and the relevance of motion analysis in the determination of surgical competence. New research fields in the training and assessment of MIS surgeons can be proposed based on these foundations, in order to contribute to the definition of structured and objective learning programmes that guarantee the accreditation of well-prepared professionals and the promotion of patient safety in the OR.

Selección de métodos estadísticos para la interpretación de intercomparaciones en ensayos de áridos finos

El objeto de este proyecto es seleccionar los métodos estadísticos adecuados para el tratamiento de los resultados obtenidos en un ejercicio de intercomparación para ensayos de áridos para construcción con el fin de cumplir la normativa para dicho ejercicio. Los ensayos estudiados son: - Ensayo Azul de Metileno - Equivalente de arena - Contenido total en azufre - Contenido en humus - Reactividad álcali-carbonato Los criterios aplicables para el desarrollo de los trabajos son los exigidos por la Entidad Nacional de Acreditación (ENAC) para laboratorios acreditados conforme a la Norma UNE-EN ISO/IEC 17025 y para proveedores acreditados conforme a la Norma UNE-EN ISO/IEC 17043. ABSTRACT: The purpose of this Project is to select appropriate statistical methods for the treatment of the results obtained from an intercomparison exercise for testing of aggregates for construction with the target of comply the rules for this exercise. The studied assays are: - Methylene Blue Assay - Sand equivalent - Total Sulfur Content - Humus content - Alkali-carbonate reactivity The criteria for the development of the work are those required by the National Accreditation Body (ENAC) for laboratories accredited in accordance with the UNE-EN ISO / IEC 17025 and for suppliers in accordance with the UNE-EN ISO / IEC 17043.

Final year project: students and instructors perceptions as a competence-strengthening tool for engineering students

This work indicates the importance of the Final Year Project (FYP) in the strengthening of competences of engineering students. The study also shows which personal competences of students are reinforced most during the FYP process,including the preparation, elaboration, presentation and defence stages. In order to gather information on this subject, a survey was conducted at two different Spanish technical universities—one public and one private—and a comparative analysis was performed of the questionnaires collected. The competence model considered is that used by the Accreditation Board for Engineering and Technology (ABET), since the official title of the public university has been accredited by this model. The results indicate which personal and professional competences of students are reinforced well by undertaking the FYP. Any significant differences in response by university are explained in the study. For validation purposes, the results were contrasted with the instructor’s perspective using the triangulation methodology. Finally, the conclusions drawn will permit the design of new study plans to cope more effectively with the challenges of the FYP in the new Bologna framework.

Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Selección de métodos estadísticos para la interpretación de intercomparaciones en ensayos de áridos para hormigón, mortero y balasto

El objeto del proyecto es determinar los métodos estadísticos adecuados para la evaluación de los resultados de un ejercicio de intercomparación entre laboratorios para ensayos de aptitud de áridos para hormigón, mortero y balasto. Los ensayos estudiados son los aludidos en la norma UNE-EN 12620:2002 de áridos para hormigón, UNE-EN 13139:2003 para mortero, y UNE-EN 13450:2003 para balasto, que pueden clasificarse según las propiedades a determinar: - Geométricas - Mecánicas y Físicas - Térmicas y de Alteración - Químicas Los criterios aplicables para el desarrollo de los trabajos son los exigidos por la Entidad Nacional de Acreditación (ENAC) para laboratorios acreditados conforme a la Norma UNE-EN ISO/IEC 17025 y para proveedores acreditados conforme a la Norma UNE-EN ISO/IEC 17043. ABSTRACT The purpose of the project is to determine the appropriate statistical methods to evaluate the results of an intercomparison exercise among laboratories for proficiency testing of aggregates for concrete, mortar and ballast. The studied assays are mentioned in the UNE-EN 12620:2002 standard of aggregates for concrete, UNE-EN 13139:2003 for mortar, and UNE-EN 13450:2003 for ballast, which can be classified according to the properties to determine: - Geometric - Mechanical and Physical - Thermal and Alteration - Chemical The criteria for the development of the work are those required by the National Accreditation Body (ENAC) for laboratories accredited according to the UNE-EN ISO / IEC 17025 and for suppliers according to the UNE-EN ISO / IEC 17043.

Desarrollo de un Laboratorio Virtual para la realización de e-comparisons en los ensayos de aislamiento acústico de fachadas según UNE-EN ISO 140-5

Actualmente son una práctica común los procesos de normalización de métodos de ensayo y acreditación de laboratorios, ya que permiten una evaluación de los procedimientos llevados a cabo por profesionales de un sector tecnológico y además permiten asegurar unos mínimos de calidad en los resultados finales. En el caso de los laboratorios de acústica, para conseguir y mantener la acreditación de un laboratorio es necesario participar activamente en ejercicios de intercomparación, utilizados para asegurar la calidad de los métodos empleados. El inconveniente de estos ensayos es el gran coste que suponen para los laboratorios, siendo en ocasiones inasumible por estos teniendo que renunciar a la acreditación. Este Proyecto Fin de Grado se centrará en el desarrollo de un Laboratorio Virtual implementado mediante una herramienta software que servirá para realizar ejercicios de intercomparación no presenciales, ampliando de ese modo el concepto e-comparison y abriendo las bases a que en un futuro este tipo de ejercicios no presenciales puedan llegar a sustituir a los llevados a cabo actualmente. En el informe primero se hará una pequeña introducción, donde se expondrá la evolución y la importancia de los procedimientos de calidad acústica en la sociedad actual. A continuación se comentará las normativas internacionales en las que se soportará el proyecto, la norma ISO 145-5, así como los métodos matemáticos utilizados en su implementación, los métodos estadísticos de propagación de incertidumbres especificados por la JCGM (Joint Committee for Guides in Metrology). Después, se hablará sobre la estructura del proyecto, tanto del tipo de programación utilizada en su desarrollo como la metodología de cálculo utilizada para conseguir que todas las funcionalidades requeridas en este tipo de ensayo estén correctamente implementadas. Posteriormente se llevará a cabo una validación estadística basada en la comparación de unos datos generados por el programa, procesados utilizando la simulación de Montecarlo, y unos cálculos analíticos, que permita comprobar que el programa funciona tal y como se ha previsto en la fase de estudio teórico. También se realizará una prueba del programa, similar a la que efectuaría un técnico de laboratorio, en la que se evaluará la incertidumbre de la medida calculándola mediante el método tradicional, pudiendo comparar los datos obtenidos con los que deberían obtenerse. Por último, se comentarán las conclusiones obtenidas con el desarrollo y pruebas del Laboratorio Virtual, y se propondrán nuevas líneas de investigación futuras relacionadas con el concepto e-comparison y la implementación de mejoras al Laboratorio Virtual. ABSTRACT. Nowadays it is common practise to make procedures to normalise trials methods standards and laboratory accreditations, as they allow for the evaluation of the procedures made by professionals from a particular technological sector in addition to ensuring a minimum quality in the results. In order for an acoustics laboratory to achieve and maintain the accreditation it is necessary to actively participate in the intercomparison exercises, since these are used to assure the quality of the methods used by the technicians. Unfortunately, the high cost of these trials is unaffordable for many laboratories, which then have to renounce to having the accreditation. This Final Project is focused on the development of a Virtual Laboratory implemented by a software tool that it will be used for making non-attendance intercomparison trials, widening the concept of e-comparison and opening the possibility for using this type of non-attendance trials instead of the current ones. First, as a short introduction, I show the evolution and the importance today of acoustic quality procedures. Second, I will discuss the international standards, such as ISO 145-5, as well the mathematic and statistical methods of uncertainty propagation specified by the Joint Committee for Guides in Metrology, that are used in the Project. Third, I speak about the structure of the Project, as well as the programming language structure and the methodology used to get the different features needed in this acoustic trial. Later, a statistical validation will be carried out, based on comparison of data generated by the program, processed using a Montecarlo simulation, and analytical calculations to verify that the program works as planned in the theoretical study. There will also be a test of the program, similar to one that a laboratory technician would carry out, by which the uncertainty in the measurement will be compared to a traditional calculation method so as to compare the results. Finally, the conclusions obtained with the development and testing of the Virtual Laboratory will be discussed, new research paths related to e-comparison definition and the improvements for the Laboratory will be proposed.