Effect of field damping layer on two step absorption of quantum dots solar cells

Multi-stacked InAs/AlGaAs quantum dot solar cells (QDSCs) introduced with field damping layers (FDL) which sustain the junction built-in potential have been studied. Without an external bias condition, the external quantum efficiency (EQE) of QD layers are reduced by introducing the thick FDL, because the carrier escape due to built-in electric field was suppressed. On the other hand, the photocurrent production due to two-step absorption is increased by the formation of flat-band QD structure for QDSC with thick FDL.

Low-thickness high-quality aluminum nitride films for super high frequency solidly mounted resonators

We investigate the sputter growth of very thin aluminum nitride (AlN) films on iridium electrodes for electroacoustic devices operating in the super high frequency range. Superior crystal quality and low stress films with thicknesses as low as 160 nm are achieved after a radio frequency plasma treatment of the iridium electrode followed by a two-step alternating current reactive magnetron sputtering of an aluminum target, which promotes better conditions for the nucleation of well textured AlN films in the very first stages of growth. Solidly mounted resonators tuned around 8 GHz with effective electromechanical coupling factors of 5.8% and quality factors Q up to 900 are achieved.

Growth data from a field trial of Quercus suber plants regenerated from selected trees and their half-sib progenies by somatic embryogenesis

The development of reliable clonal propagation technologies is a requisite for performing Multi-Varietal Forestry (MVF). Somatic embryogenesis is considered the tissue culture based method more suitable for operational breeding of forest trees. Vegetative propagation is very difficult when tissues are taken from mature donors, making clonal propagation of selected trees almost impossible. We have been able to induce somatic embryogenesis in leaves taken from mature oak trees, including cork oak (Quercus suber). This important species of the Mediterranean ecosystem produces cork regularly, conferring to this species a significant economic value. In a previous paper we reported the establishment of a field trial to compare the growth of plants of somatic origin vs zygotic origin, and somatic plants from mature trees vs somatic plants from juvenile seedlings. For that purpose somatic seedlings were regenerated from five selected cork oak trees and from young plants of their half-sib progenies by somatic embryogenesis. They were planted in the field together with acorn-derived plants of the same families. After the first growth period, seedlings of zygotic origin doubled the height of somatic seedlings, showing somatic plants of adult and juvenile origin similar growth. Here we provide data on height and diameter increases after two additional growth periods. In the second one, growth parameters of zygotic seedlings were also significantly higher than those of somatic ones, but there were not significant differences in height increase between seedlings and somatic plants of mature origin. In the third growth period, height and diameter increases of somatic seedlings cloned from the selected trees did not differ from those of zygotic seedlings, which were still higher than data from plants obtained from somatic embryos from the sexual progeny. Therefore, somatic seedlings from mature origin seem not to be influenced by a possible ageing effect, and plants from somatic embryos tend to minimize the initial advantage of plants from acorns

Design of a Two-Phase buck converter with fourth-order output filter for envelope amplifiers of limited bandwidth

The use of techniques such as envelope tracking (ET) and envelope elimination and restoration (EER) can improve the efficiency of radio frequency power amplifiers (RFPA). In both cases, high-bandwidth DC/DC converters called envelope amplifiers (EA) are used to modulate the supply voltage of the RFPA. This paper addresses the analysis and design of a modified two-phase Buck converter optimized to operate as EA. The effects of multiphase operation on the tracking capabilities are analyzed. The use of a fourth-order output filter is proposed to increase the attenuation of the harmonics generated by the PWM operation, thus allowing a reduction of the ratio between the switching frequency and the converter bandwidth. The design of the output filter is addressed considering envelope tracking accuracy and distortion caused by the side bands arising from the nonlinear modulation process. Finally, the proposed analysis and design methods are supported by simulation results, as well as demonstrated by experiments obtained using two 100-W, 10-MHz, two-phase Buck EAs capable of accurately tracking a 1.5-MHz bandwidth OFDM signal.

Production of biodiesel from animal fat using supercritical ethanol

Biodiesel is currently produced from a catalytic transesterification reaction of various types of edible and non-edible oil with methanol. The use of waste animal tallow instead of edible oils opens a route to recycle this waste. This material has the advantage of lower costs but the problem of high content of free fatty acids, becoming necessary a pre-esterification reaction that increases the cost of the catalytic process. The production of biodiesel using supercritical alcohols is appropriate for materials with high acidity and water content, therefore the use of this process with animal fat is a promising alternative. Ethanol has been used because it can be produced from biomass via fermentation resulting in a complete renewable biodiesel, instead of methanol that derives from fossil feedstocks. Two different processes have been studied: first, the direct transesterification of animal fat using supercritical ethanol and second a two-step process where the first step is a hydrolysis of the animal fat and the second step is the esterification of the resulting fatty acids. The temperature, the molar ratio ethanol:fat and the time have been modified in the different reactions to study the effect in the final conversion and the degradation of the unsaturated fatty acid esters, main inconvenient of these high temperature and pressure processes.

Study of rapid ionisation for simulation of soft X-ray lasers with the 2D hydro-radiative code ARWEN

We present our fast ionisation routine used to study transient softX-raylasers with ARWEN, a two-dimensional hydrodynamic code incorporating adaptative mesh refinement (AMR) and radiative transport. We compute global rates between ion stages assuming an effective temperature between singly-excited levels of each ion. A two-step method is used to obtain in a straightforward manner the variation of ion populations over long hydrodynamic time steps. We compare our model with existing theoretical results both stationary and transient, finding that the discrepancies are moderate except for large densities. We simulate an existing Molybdenum Ni-like transient softX-raylaser with ARWEN. Use of the fast ionisation routine leads to a larger increase in temperature and a larger gain zone than when LTE datatables are used.

Recrystallization of amorphous nano-tracks and uniform layers generated by swift-ion-beam irradiation in lithium niobate.

The thermal annealing of amorphous tracks of nanometer-size diameter generated in lithium niobate (LiNbO3) by Bromine ions at 45 MeV, i.e., in the electronic stopping regime, has been investigated by RBS/C spectrometry in the temperature range from 250°C to 350°C. Relatively low fluences have been used (<1012 cm−2) to produce isolated tracks. However, the possible effect of track overlapping has been investigated by varying the fluence between 3×1011 cm−2 and 1012 cm−2. The annealing process follows a two-step kinetics. In a first stage (I) the track radius decreases linearly with the annealing time. It obeys an Arrhenius-type dependence on annealing temperature with activation energy around 1.5 eV. The second stage (II) operates after the track radius has decreased down to around 2.5 nm and shows a much lower radial velocity. The data for stage I appear consistent with a solid-phase epitaxial process that yields a constant recrystallization rate at the amorphous-crystalline boundary. HRTEM has been used to monitor the existence and the size of the annealed isolated tracks in the second stage. On the other hand, the thermal annealing of homogeneous (buried) amorphous layers has been investigated within the same temperature range, on samples irradiated with Fluorine at 20 MeV and fluences of ∼1014 cm−2. Optical techniques are very suitable for this case and have been used to monitor the recrystallization of the layers. The annealing process induces a displacement of the crystalline-amorphous boundary that is also linear with annealing time, and the recrystallization rates are consistent with those measured for tracks. The comparison of these data with those previously obtained for the heavily damaged (amorphous) layers produced by elastic nuclear collisions is summarily discussed.

Research on intermediate band solar cells and development of experimental techniques for their characterization under concentrated illumination

Abstract This work is a contribution to the research and development of the intermediate band solar cell (IBSC), a high efficiency photovoltaic concept that features the advantages of both low and high bandgap solar cells. The resemblance with a low bandgap solar cell comes from the fact that the IBSC hosts an electronic energy band -the intermediate band (IB)- within the semiconductor bandgap. This IB allows the collection of sub-bandgap energy photons by means of two-step photon absorption processes, from the valence band (VB) to the IB and from there to the conduction band (CB). The exploitation of these low energy photons implies a more efficient use of the solar spectrum. The resemblance of the IBSC with a high bandgap solar cell is related to the preservation of the voltage: the open-circuit voltage (VOC) of an IBSC is not limited by any of the sub-bandgaps (involving the IB), but only by the fundamental bandgap (defined from the VB to the CB). Nevertheless, the presence of the IB allows new paths for electronic recombination and the performance of the IBSC is degraded at 1 sun operation conditions. A theoretical argument is presented regarding the need for the use of concentrated illumination in order to circumvent the degradation of the voltage derived from the increase in the recombi¬nation. This theory is supported by the experimental verification carried out with our novel characterization technique consisting of the acquisition of photogenerated current (IL)-VOC pairs under low temperature and concentrated light. Besides, at this stage of the IBSC research, several new IB materials are being engineered and our novel character¬ization tool can be very useful to provide feedback on their capability to perform as real IBSCs, verifying or disregarding the fulfillment of the “voltage preservation” principle. An analytical model has also been developed to assess the potential of quantum-dot (QD)-IBSCs. It is based on the calculation of band alignment of III-V alloyed heterojunc-tions, the estimation of the confined energy levels in a QD and the calculation of the de¬tailed balance efficiency. Several potentially useful QD materials have been identified, such as InAs/AlxGa1-xAs, InAs/GaxIn1-xP, InAs1-yNy/AlAsxSb1-x or InAs1-zNz/Alx[GayIn1-y]1-xP. Finally, a model for the analysis of the series resistance of a concentrator solar cell has also been developed to design and fabricate IBSCs adapted to 1,000 suns. Resumen Este trabajo contribuye a la investigación y al desarrollo de la célula solar de banda intermedia (IBSC), un concepto fotovoltaico de alta eficiencia que auna las ventajas de una célula solar de bajo y de alto gap. La IBSC se parece a una célula solar de bajo gap (o banda prohibida) en que la IBSC alberga una banda de energía -la banda intermedia (IB)-en el seno de la banda prohibida. Esta IB permite colectar fotones de energía inferior a la banda prohibida por medio de procesos de absorción de fotones en dos pasos, de la banda de valencia (VB) a la IB y de allí a la banda de conducción (CB). El aprovechamiento de estos fotones de baja energía conlleva un empleo más eficiente del espectro solar. La semejanza antre la IBSC y una célula solar de alto gap está relacionada con la preservación del voltaje: la tensión de circuito abierto (Vbc) de una IBSC no está limitada por ninguna de las fracciones en las que la IB divide a la banda prohibida, sino que está únicamente limitada por el ancho de banda fundamental del semiconductor (definido entre VB y CB). No obstante, la presencia de la IB posibilita nuevos caminos de recombinación electrónica, lo cual degrada el rendimiento de la IBSC a 1 sol. Este trabajo argumenta de forma teórica la necesidad de emplear luz concentrada para evitar compensar el aumento de la recom¬binación de la IBSC y evitar la degradación del voltage. Lo anterior se ha verificado experimentalmente por medio de nuestra novedosa técnica de caracterización consistente en la adquisicin de pares de corriente fotogenerada (IL)-VOG en concentración y a baja temperatura. En esta etapa de la investigación, se están desarrollando nuevos materiales de IB y nuestra herramienta de caracterizacin está siendo empleada para realimentar el proceso de fabricación, comprobando si los materiales tienen capacidad para operar como verdaderas IBSCs por medio de la verificación del principio de preservación del voltaje. También se ha desarrollado un modelo analítico para evaluar el potencial de IBSCs de puntos cuánticos. Dicho modelo está basado en el cálculo del alineamiento de bandas de energía en heterouniones de aleaciones de materiales III-V, en la estimación de la energía de los niveles confinados en un QD y en el cálculo de la eficiencia de balance detallado. Este modelo ha permitido identificar varios materiales de QDs potencialmente útiles como InAs/AlxGai_xAs, InAs/GaxIni_xP, InAsi_yNy/AlAsxSbi_x ó InAsi_zNz/Alx[GayIni_y]i_xP. Finalmente, también se ha desarrollado un modelado teórico para el análisis de la resistencia serie de una célula solar de concentración. Gracias a dicho modelo se han diseñado y fabricado IBSCs adaptadas a 1.000 soles.

Automatic motion compensation of free breathing acquired myocardial perfusion data by using independent component analysis

Images acquired during free breathing using first-pass gadolinium-enhanced myocardial perfusion magnetic resonance imaging (MRI) exhibit a quasiperiodic motion pattern that needs to be compensated for if a further automatic analysis of the perfusion is to be executed. In this work, we present a method to compensate this movement by combining independent component analysis (ICA) and image registration: First, we use ICA and a time?frequency analysis to identify the motion and separate it from the intensity change induced by the contrast agent. Then, synthetic reference images are created by recombining all the independent components but the one related to the motion. Therefore, the resulting image series does not exhibit motion and its images have intensities similar to those of their original counterparts. Motion compensation is then achieved by using a multi-pass image registration procedure. We tested our method on 39 image series acquired from 13 patients, covering the basal, mid and apical areas of the left heart ventricle and consisting of 58 perfusion images each. We validated our method by comparing manually tracked intensity profiles of the myocardial sections to automatically generated ones before and after registration of 13 patient data sets (39 distinct slices). We compared linear, non-linear, and combined ICA based registration approaches and previously published motion compensation schemes. Considering run-time and accuracy, a two-step ICA based motion compensation scheme that first optimizes a translation and then for non-linear transformation performed best and achieves registration of the whole series in 32 ± 12 s on a recent workstation. The proposed scheme improves the Pearsons correlation coefficient between manually and automatically obtained time?intensity curves from .84 ± .19 before registration to .96 ± .06 after registration

Voltage recovery in intermediate band solar cells

The intermediate band solar cell (IBSC) is based on a novel photovoltaic concept and has a limiting efficiency of 63.2%, which compares favorably with the 40.7% efficiency of a conventional, single junction solar cell. It is characterized by a material hosting a collection of energy levels within its bandgap, allowing the cell to exploit photons with sub-bandgap energies in a two-step absorption process, thus improving the utilization of the solar spectrum. However, these intermediate levels are often regarded as an inherent source of supplementary recombination, although this harmful effect can in theory be counteracted by the use of concentrated light. We present here a novel, low-temperature characterization technique using concentrated light that reveals how the initially enhanced recombination in the IBSC is reduced so that its open-circuit voltage is completely recovered and reaches that of a conventional solar cell.

A silviculture-oriented spatio-temporal model for germination in Pinus pinea L. in the Spanish Northern Plateau based on a direct seeding experiment

Natural regeneration in Pinus pinea stands commonly fails throughout the Spanish Northern Plateau under current intensive regeneration treatments. As a result, extensive direct seeding is commonly conducted to guarantee regeneration occurrence. In a period of rationalization of the resources devoted to forest management, this kind of techniques may become unaffordable. Given that the climatic and stand factors driving germination remain unknown, tools are required to understand the process and temper the use of direct seeding. In this study, the spatio-temporal pattern of germination of P. pinea was modelled with those purposes. The resulting findings will allow us to (1) determine the main ecological variables involved in germination in the species and (2) infer adequate silvicultural alternatives. The modelling approach focuses on covariates which are readily available to forest managers. A two-step nonlinear mixed model was fitted to predict germination occurrence and abundance in P. pinea under varying climatic, environmental and stand conditions, based on a germination data set covering a 5-year period. The results obtained reveal that the process is primarily driven by climate variables. Favourable conditions for germination commonly occur in fall although the optimum window is often narrow and may not occur at all in some years. At spatial level, it would appear that germination is facilitated by high stand densities, suggesting that current felling intensity should be reduced. In accordance with other studies on P. pinea dispersal, it seems that denser stands during the regeneration period will reduce the present dependence on direct seeding.

Correlation between ileal digestibility of amino acids and chemical composition of soybean meals in broilers at 21 days of age

The correlations between chemical composition and coefficient of standardized ileal digestibility (CSID) of crude protein (CP) and amino acids (AA) were determined in 22 soybean meal (SBM) samples originated from USA (n = 8), Brazil (BRA; n = 7) and Argentina (ARG; n = 7) in 21-day old broilers. Birds were fed a commercial maize-SBM diet from 1 to 17 days of age followed by the experimental diets in which the SBM tested was the only source of protein (205 g CP/kg) for three days. Also, in vitro nitrogen (N) digestion study was conducted with these samples using the two-step enzymatic method. The coefficient of apparent ileal digestibility (CAID) of the SBM, independent of the origin, varied from 0.820 to 0.880 for CP, 0.850 to 0.905 for lysine (Lys), 0.859 to 0.907 for methionine (Met) and 0.664 to 0.750 for cysteine (Cys). The corresponding CSID values varied from 0.850 to 0.966 for CP, 0.891 to 0.940 for Lys, 0.931 to 0.970 for Met and 0.786 to 0.855 for Cys. The CSID of CP and Lys of the SBM were positively correlated with CP (r = 0.514; P menor que 0.05 and r = 0.370; P = 0.09, respectively), KOH solubility (KOH sol.) (r = 0.696; P menor que 0.001 and r = 0.619; P menor que 0.01, respectively), trypsin inhibitor activity (TIA) (r = 0.541; P menor que 0.01 and r = 0.416; P = 0.05, respectively) and reactive Lys (r = 0.563; P menor que 0.01 and r = 0.486; P menor que 0.05) values, but no relation was observed with neutral detergent fiber and oligosaccharide content. No relation between the CSID of CP determined in vivo and N digestibility determined in vitro was found. The CSID of most key AA were higher for the USA and the BRA meals than for the ARG meals. For Lys, the CSID was 0.921, 0.919 and 0.908 (P menor que 0.05) and for Cys 0.828, 0.833 and 0.800 (P menor que 0.01) for USA, BRA and ARG meals, respectively. It is concluded that under the conditions of this experiment, the CSID of CP and Lys increased with CP content, KOH sol., TIA and reactive Lys values of the SBM. The CSID of most limiting AA, including Lys and Cys, were higher for USA and BRA meals than for ARG meals.

Effect of concentration on the performance of quantum dot intermediate-band solar cells

Implementation of a high-efficiency quantum dot intermediate-band solar cell (QD-IBSC) must accompany a sufficient photocurrent generation via IB states. The demonstration of a QD-IBSC is presently undergoing two stages. The first is to develop a technology to fabricate high-density QD stacks or a superlattice of low defect density placed within the active region of a p-i-n SC, and the second is to realize half-filled IB states to maximize the photocurrent generation by two-step absorption of sub-bandgap photons. For this, we have investigated the effect of light concentration on the characteristics of QDSCs comprised of multi-layer stacks of self-organized InAs/GaNAs QDs grown with and without impurity doping in molecular beam epitaxy.

Hybrid incremental modeling based on least squares and fuzzy K-NN for monitoring tool wear in turning processes

There is now an emerging need for an efficient modeling strategy to develop a new generation of monitoring systems. One method of approaching the modeling of complex processes is to obtain a global model. It should be able to capture the basic or general behavior of the system, by means of a linear or quadratic regression, and then superimpose a local model on it that can capture the localized nonlinearities of the system. In this paper, a novel method based on a hybrid incremental modeling approach is designed and applied for tool wear detection in turning processes. It involves a two-step iterative process that combines a global model with a local model to take advantage of their underlying, complementary capacities. Thus, the first step constructs a global model using a least squares regression. A local model using the fuzzy k-nearest-neighbors smoothing algorithm is obtained in the second step. A comparative study then demonstrates that the hybrid incremental model provides better error-based performance indices for detecting tool wear than a transductive neurofuzzy model and an inductive neurofuzzy model.

Análisis de las diferencias en el crecimiento vegetativo, en los componentes del rendimiento y en la composición de las uvas y vinos del cv. cabernet sauvignon (vitis vinifera L.), producidos por el déficit hídrico durante pre-envero y post-envero

La presente Tesis Doctoral se realizó con el fin de estimar conjuntamente la respuesta agronómica y fisiológica de la vid (Vitis vinifera L.), así como los efectos sobre la evolución de la maduración, composición y la calidad de la uva y del vino, bajo la aplicación de diferentes déficit hídricos en pre-envero y post-envero, dentro de un marco de referencia de cambio climático. La variación climática que prevén los estudios sobre el cambio climático, resulta un factor decisivo en la eficiencia del uso del agua en la vid. En zonas cálidas, las estrategias de cultivo del viñedo frente al cambio climático deben de ir dirigidas a atenuar sus efectos sobre el crecimiento y el desarrollo de la vid, haciéndose imprescindible el estudio pormenorizado del déficit hídrico como factor decisivo en la obtención de las uvas adecuadas, ya que son la clave indispensable para el éxito en la elaboración del vino, y de forma muy especial en los vinos enfocados a un sector de alta calidad. El ensayo se llevó a cabo en un viñedo comercial de Bodegas Licinia, en la Comunidad de Madrid, durante los años 2010 y 2011. La variedad estudiada fue Cabernet sauvignon / 41 B, plantada a un marco de plantación de 3 m x 1 m, con un guiado vertical de la vegetación. El dispositivo experimental fue totalmente al azar, y se establecieron 4 tratamientos experimentales con 4 grados de disponibilidad hídrica, déficit moderado continuo (T0,45-0,6), déficit severo continuo (T0-0,3), déficit severo después de envero (T0,45-0,3) y déficit severo antes de envero (T0-0,6). En cada tratamiento se distribuyeron 3 repeticiones. El año 2010 fue el más lluvioso de los años de ensayo, con 478 mm de precipitaciones anuales, lo que supuso 146 mm más que en el año 2011. Su distribución a lo largo del ciclo fue más homogénea en el año 2010, mientras que en 2011 las precipitaciones contabilizadas en el período de maduración de la uva fueron nulas. La temperatura media subió 0,9ºC en 2011, respecto a 2010 y en cuanto a la integral térmica eficaz, en 2011 se acumularon, desde el 1 de abril hasta el final de ciclo, 217 grados•día más que en 2010. El déficit hídrico en pre-envero, modificó notablemente el crecimiento vegetativo y la producción de cosecha de la parcela de ensayo, no así la fertilidad de las yemas. El tratamiento con mayor disponibilidad hídrica (T0,45-0,6) obtuvo el mayor peso de baya, y los tratamientos con menor déficit hídrico en pre-envero (T0,45-0,6 y T0,45-0,3) registraron los mayores rendimientos de cosecha, mientras que las menores tasas de cuajado correspondieron al tratamiento con un déficit severo continuo (T0-0,3). La parcela de ensayo se caracterizó por un exceso de vigor y un alto crecimiento vegetativo. El pH del mosto se vio afectado por el déficit hídrico, disminuyendo su valor en el tratamiento de déficit hídrico severo antes de envero (T0-0,6). Organolépticamente, no se percibieron diferencias significativas en los vinos elaborados en función del déficit hídrico, y respecto a su composición físico-química, solo existieron diferencias en la concentración de ácido L-Málico, con mayores concentraciones en los tratamientos sin déficit hídrico en pre-envero, T0,45-0,6 y T0,45-0,3. El déficit hídrico modificó notablemente el color del vino, aumentando los valores de las coordenadas CIELAB a* y b*, la luminosidad (L*), croma (C*) y tonalidad (H*), para los tratamientos con un déficit severo en pre-envero (T0-0,3 y T0-0,6) y disminuyendo estas en el tratamiento con mayor disponibilidad hídrica (T0,45-0,6). Del mismo modo, mediante el análisis de color por métodos tradicionales, IPT e IC de los vinos, aumentó en los tratamientos con mayor déficit hídrico en pre-envero (T0-0,3 y T0-0,6), respecto a los tratamientos de mayor disponibilidad (T0,45-0,6 y T0,45-0,3). La concentración de taninos de la baya en vendimia, no se vio afectada por el déficit hídrico, aunque sí estuvo relacionada positivamente con el tamaño de las bayas. Organolépticamente, los hollejos del año 2011 resultaron con menor frescura, acidez, afrutado, sensación herbácea e intensidad tánica, aunque con mayor astringencia respecto a 2010. Las pepitas fueron más astringentes y aromáticas pero menos crujientes, sin llegar a los niveles de madurez del año 2010. El catador relacionó los taninos con la calidad del vino, asociándolos con un mayor cuerpo, acidez, intensidad, equilibrio gustativo, amargor y menor astringencia en la fase gustativa. La concentración de taninos en los vinos se vio favorecida con el déficit hídrico en pre-envero y post-envero. Los tratamientos con mayor déficit hídrico en pre-envero, T0-0,6 y T0-0,3, obtuvieron las menores concentraciones de potasio en mostos y vinos. Las relaciones entre la concentración de potasio, ácido L-Málico y el porcentaje de color rojo puro (dA(%)) resultaron altamente significativas, de modo que las mayores tasas de potasio en el vino se asociaron a los valores más bajos de color rojo y a los mayores de ácido L-Málico. ABSTRACT The present Doctoral Thesis has been done in order to estimate the grapevine (Vitis vinifera L.) agronomic and physiologic performance or response as well as the impact in the grape and wine maturity, composition and quality evolution, with different water deficits. The variation in climate that the global warming studies for seen is a key factor for the grapevine water use efficiency. In warm areas the farming vineyards strategy to face the climatic change, should be focused on diminish the effects on the grapevine growth and development, so that the water deficit detailed analysis becomes decisive to obtain the appropriate grapes, that are the main subject for a successful wine production and especially for top quality wines. The trial was carried out in a commercial vineyard in Chinchón (Madrid), Licinia winery, during the 2010 and 2011 seasons. The grape variety studied was Cabernet Sauvignon grafted onto 41B with a vine spacing 3m x 1m trained as VSP. Experimental design consisted on 4 irrigation treatments with 3 replications totally randomized. Irrigation treatments were: moderate regulated deficit (T0,45-0,6), severe continuous deficit (T0-0,3), severe post-veraison deficit (T0,45-0,3) and severe pre veraison deficit (T0-0,6). The 2010 was rainier year than the 2011; Total annual rain in 2010 was 478 mm, which resulted in 146 mm more than in 2011. The distribution along the vine cycle was more homogeneous in the 2010, whereas precipitations in 2011 along the grape maturity period were nonexistent. The average temperature in 2011 was 0,9ºC higher than that of the 2010 and regarding to the thermal integral, in the 2011 from 1st April to the end of the growing cycle, was 217 degrees•day higher than that in 2010. Water deficit significantly modified the vegetative growth and yield but, it did not modified bud fertility. The treatment with the highest water availability (T0,45-0,6) got the highest berry size, the lowest berry set rates were found in the severe continuous deficit treatment (T0-0,3). The plot studied in this trial was characterized by both excessive vigour and vegetative growth. Water deficit modified the pH must by, reducing it in the severe water deficit during pre-veraison (T0-0,6). There were not differences in wine tasting between the water deficits treatments. Regarding to the physical-chemical composition, it only existed differences in the L-malic acid concentration, resulting higher concentrations in the water deficit pre-veraison treatments: T0,45-0,6 y T0,45-0,3. Water deficit significantly modified wine colour by, increasing the CIELAB coordinates a* and b*, the brightness (L*), croma (C*) and tonality (H*), in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), and reducing them in the in the moderate continuous water deficit ones (T0,45-0,6). By means of traditional wine colour parameters analyses, red colour percentage, TPI, they became higher in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), than in those with higher availability (T0,45-0,6 y T0,45-0,3). At harvest, berry tannins concentrations was not affected by the water deficit although it did in a positive way, in the berry size. Berry tasting in 2011, resulted in a lower freshness, acidity, fruity, herbaceous flavour and tannic intensity, but with higher astringency respect to the 2010 season. Seeds, in 2011, were more astringent and aromatic as in the 2010, but less crunchy, without getting to the point of maturity. The taster linked the tannins to wine quality, associating them with a higher bodiest wine, acidity, intensity, taste balance, bitterness and with a lower astringency in the tasting stage. Treatments with a higher water deficit up to veraison T0-0,6 y T0-0,3 got less musts and wines potassium concentration. The relation between L-malic acid and the full red color percentage (dA(%)), were highly related, resulting the higher potassium content the lower wine quality.