29 resultados para Year 2000 date conversion (Computer systems)
em Universidad Politécnica de Madrid
Resumo:
In this paper we propose a new benchmark to drive making decisions in maintenance of computer systems. This benchmark is made from load average sample data. The main goal is to improve reliability and performance of a set of devices or components. In particular, the stability of the system is measured in terms of variability of the load. A forecast of the behavior of this stability is also proposal as part of the reporting benchmark. At the final stage, a more stable system is obtained and its global reliability and performance can be then evaluated by means of appropriate specifications.
Resumo:
The term "Logic Programming" refers to a variety of computer languages and execution models which are based on the traditional concept of Symbolic Logic. The expressive power of these languages offers promise to be of great assistance in facing the programming challenges of present and future symbolic processing applications in Artificial Intelligence, Knowledge-based systems, and many other areas of computing. The sequential execution speed of logic programs has been greatly improved since the advent of the first interpreters. However, higher inference speeds are still required in order to meet the demands of applications such as those contemplated for next generation computer systems. The execution of logic programs in parallel is currently considered a promising strategy for attaining such inference speeds. Logic Programming in turn appears as a suitable programming paradigm for parallel architectures because of the many opportunities for parallel execution present in the implementation of logic programs. This dissertation presents an efficient parallel execution model for logic programs. The model is described from the source language level down to an "Abstract Machine" level suitable for direct implementation on existing parallel systems or for the design of special purpose parallel architectures. Few assumptions are made at the source language level and therefore the techniques developed and the general Abstract Machine design are applicable to a variety of logic (and also functional) languages. These techniques offer efficient solutions to several areas of parallel Logic Programming implementation previously considered problematic or a source of considerable overhead, such as the detection and handling of variable binding conflicts in AND-Parallelism, the specification of control and management of the execution tree, the treatment of distributed backtracking, and goal scheduling and memory management issues, etc. A parallel Abstract Machine design is offered, specifying data areas, operation, and a suitable instruction set. This design is based on extending to a parallel environment the techniques introduced by the Warren Abstract Machine, which have already made very fast and space efficient sequential systems a reality. Therefore, the model herein presented is capable of retaining sequential execution speed similar to that of high performance sequential systems, while extracting additional gains in speed by efficiently implementing parallel execution. These claims are supported by simulations of the Abstract Machine on sample programs.
Resumo:
The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also in laboratories in Campus Monte-Gancedo for Biotechnology of Plants and Computational Biotechnology. Curricula include Basics, Engineering, Practices, Visits, English, ?project of end of career?, Stays. Some masters will conduce to specific professional diploma, list includes now Agro-Engineering, Agro-Forestal Biotechnology, Agro and Natural Resources Economy, Complex Physical Systems, Gardening and Landscaping, Rural Genie, Phytogenetic Resources, Plant Genetic Resources, Environmental Technology for Sustainable Agriculture, Technology for Human Development and Cooperation.
Resumo:
El trabajo ha sido realizado dentro del marco de los proyectos EURECA (Enabling information re-Use by linking clinical REsearch and Care) e INTEGRATE (Integrative Cancer Research Through Innovative Biomedical Infrastructures), en los que colabora el Grupo de Informática Biomédica de la UPM junto a otras universidades e instituciones sanitarias europeas. En ambos proyectos se desarrollan servicios e infraestructuras con el objetivo principal de almacenar información clínica, procedente de fuentes diversas (como por ejemplo de historiales clínicos electrónicos de hospitales, de ensayos clínicos o artículos de investigación biomédica), de una forma común y fácilmente accesible y consultable para facilitar al máximo la investigación de estos ámbitos, de manera colaborativa entre instituciones. Esta es la idea principal de la interoperabilidad semántica en la que se concentran ambos proyectos, siendo clave para el correcto funcionamiento del software del que se componen. El intercambio de datos con un modelo de representación compartido, común y sin ambigüedades, en el que cada concepto, término o dato clínico tendrá una única forma de representación. Lo cual permite la inferencia de conocimiento, y encaja perfectamente en el contexto de la investigación médica. En concreto, la herramienta a desarrollar en este trabajo también está orientada a la idea de maximizar la interoperabilidad semántica, pues se ocupa de la carga de información clínica con un formato estandarizado en un modelo común de almacenamiento de datos, implementado en bases de datos relacionales. El trabajo ha sido desarrollado en el periodo comprendido entre el 3 de Febrero y el 6 de Junio de 2014. Se ha seguido un ciclo de vida en cascada para la organización del trabajo realizado en las tareas de las que se compone el proyecto, de modo que una fase no puede iniciarse sin que se haya terminado, revisado y aceptado la fase anterior. Exceptuando la tarea de documentación del trabajo (para la elaboración de esta memoria), que se ha desarrollado paralelamente a todas las demás. ----ABSTRACT--- The project has been developed during the second semester of the 2013/2014 academic year. This Project has been done inside EURECA and INTEGRATE European biomedical research projects, where the GIB (Biomedical Informatics Group) of the UPM works as a partner. Both projects aim is to develop platforms and services with the main goal of storing clinical information (e.g. information from hospital electronic health records (EHRs), clinical trials or research articles) in a common way and easy to access and query, in order to support medical research. The whole software environment of these projects is based on the idea of semantic interoperability, which means the ability of computer systems to exchange data with unambiguous and shared meaning. This idea allows knowledge inference, which fits perfectly in medical research context. The tool to develop in this project is also "semantic operability-oriented". Its purpose is to store standardized clinical information in a common data model, implemented in relational databases. The project has been performed during the period between February 3rd and June 6th, of 2014. It has followed a "Waterfall model" of software development, in which progress is seen as flowing steadily downwards through its phases. Each phase starts when its previous phase has been completed and reviewed. The task of documenting the project‟s work is an exception; it has been performed in a parallel way to the rest of the tasks.
Resumo:
The Bologna Declaration and the implementation of the European Higher Education Area are promoting the use of active learning methodologies. The aim of this study is to evaluate the effects obtained after applying active learning methodologies to the achievement of generic competences as well as to the academic performance. This study has been carried out at the Universidad Politécnica de Madrid, where these methodologies have been applied to the Operating Systems I subject of the degree in Technical Engineering in Computer Systems. The fundamental hypothesis tested was whether the implementation of active learning methodologies (cooperative learning and problem based learning) favours the achievement of certain generic competences (‘teamwork’ and ‘planning and time management’) and also whether this fact improved the academic performance of our students. The original approach of this work consists in using psychometric tests to measure the degree of acquired student’s generic competences instead of using opinion surveys, as usual. Results indicated that active learning methodologies improve the academic performance when compared to the traditional lecture/discussion method, according to the success rate obtained. These methods seem to have as well an effect on the teamwork competence (the perception of the behaviour of the other members in the group) but not on the perception of each students’ behaviour. Active learning does not produce any significant change in the generic competence ‘planning and time management'.
Resumo:
The Bologna Declaration and the implementation of the European Higher Education Area are promoting the use of active learning methodologies such as cooperative learning and project based learning. This study was motivated by the comparison of the results obtained after applying Cooperative Learning (CL) and Project Based Learning (PBL) to a subject of Computer Engineering. The fundamental hypothesis tested was whether the academic success achieved by the students of the first years was higher when CL was applied than in those cases to which PBL was applied. A practical case, by means of which the effectiveness of CL and PBL are compared, is presented in this work. This study has been carried out at the Universidad Politécnica de Madrid, where these mechanisms have been applied to the Operating Systems I subject from the Technical Engineering in Computer Systems degree (OSIS) and to the same subject from the Technical Engineering in Computer Management degree (OSIM). Both subjects have the same syllabus, are taught in the same year and semester and share also formative objectives. From this study we can conclude that students¿ academic performance (regarding the grades given) is greater with PBL than with CL. To be more specific, the difference is between 0.5 and 1 point for the individual tests. For the group tests, this difference is between 2.5 and 3 points. Therefore, this study refutes the fundamental hypothesis formulated at the beginning. Some of the possible interpretations of these results are referred to in this study.
Resumo:
En esta tesis se estudia la representación, modelado y comparación de colecciones mediante el uso de ontologías en el ámbito de la Web Semántica. Las colecciones, entendidas como agrupaciones de objetos o elementos con entidad propia, son construcciones que aparecen frecuentemente en prácticamente todos los dominios del mundo real, y por tanto, es imprescindible disponer de conceptualizaciones de estas estructuras abstractas y de representaciones de estas conceptualizaciones en los sistemas informáticos, que definan adecuadamente su semántica. Mientras que en muchos ámbitos de la Informática y la Inteligencia Artificial, como por ejemplo la programación, las bases de datos o la recuperación de información, las colecciones han sido ampliamente estudiadas y se han desarrollado representaciones que responden a multitud de conceptualizaciones, en el ámbito de la Web Semántica, sin embargo, su estudio ha sido bastante limitado. De hecho hasta la fecha existen pocas propuestas de representación de colecciones mediante ontologías, y las que hay sólo cubren algunos tipos de colecciones y presentan importantes limitaciones. Esto impide la representación adecuada de colecciones y dificulta otras tareas comunes como la comparación de colecciones, algo crítico en operaciones habituales como las búsquedas semánticas o el enlazado de datos en la Web Semántica. Para solventar este problema esta tesis hace una propuesta de modelización de colecciones basada en una nueva clasificación de colecciones de acuerdo a sus características estructurales (homogeneidad, unicidad, orden y cardinalidad). Esta clasificación permite definir una taxonomía con hasta 16 tipos de colecciones distintas. Entre otras ventajas, esta nueva clasificación permite aprovechar la semántica de las propiedades estructurales de cada tipo de colección para realizar comparaciones utilizando las funciones de similitud y disimilitud más apropiadas. De este modo, la tesis desarrolla además un nuevo catálogo de funciones de similitud para las distintas colecciones, donde se han recogido las funciones de (di)similitud más conocidas y también algunas nuevas. Esta propuesta se ha implementado mediante dos ontologías paralelas, la ontología E-Collections, que representa los distintos tipos de colecciones de la taxonomía y su axiomática, y la ontología SIMEON (Similarity Measures Ontology) que representa los tipos de funciones de (di)similitud para cada tipo de colección. Gracias a estas ontologías, para comparar dos colecciones, una vez representadas como instancias de la clase más apropiada de la ontología E-Collections, automáticamente se sabe qué funciones de (di)similitud de la ontología SIMEON pueden utilizarse para su comparación. Abstract This thesis studies the representation, modeling and comparison of collections in the Semantic Web using ontologies. Collections, understood as groups of objects or elements with their own identities, are constructions that appear frequently in almost all areas of the real world. Therefore, it is essential to have conceptualizations of these abstract structures and representations of these conceptualizations in computer systems, that define their semantic properly. While in many areas of Computer Science and Artificial Intelligence, such as Programming, Databases or Information Retrieval, the collections have been extensively studied and there are representations that match many conceptualizations, in the field Semantic Web, however, their study has been quite limited. In fact, there are few representations of collections using ontologies so far, and they only cover some types of collections and have important limitations. This hinders a proper representation of collections and other common tasks like comparing collections, something critical in usual operations such as semantic search or linking data on the Semantic Web. To solve this problem this thesis makes a proposal for modelling collections based on a new classification of collections according to their structural characteristics (homogeneity, uniqueness, order and cardinality). This classification allows to define a taxonomy with up to 16 different types of collections. Among other advantages, this new classification can leverage the semantics of the structural properties of each type of collection to make comparisons using the most appropriate (dis)similarity functions. Thus, the thesis also develops a new catalog of similarity functions for the different types of collections. This catalog contains the most common (dis)similarity functions as well as new ones. This proposal is implemented through two parallel ontologies, the E-Collections ontology that represents the different types of collections in the taxonomy and their axiomatic, and the SIMEON ontology (Similarity Measures Ontology) that represents the types of (dis)similarity functions for each type of collection. Thanks to these ontologies, to compare two collections, once represented as instances of the appropriate class of E-Collections ontology, we can know automatically which (dis)similarity functions of the SIMEON ontology are suitable for the comparison. Finally, the feasibility and usefulness of this modeling and comparison of collections proposal is proved in the field of oenology, applying both E-Collections and SIMEON ontologies to the representation and comparison of wines with the E-Baco ontology.
Resumo:
Dentro del análisis y diseño estructural surgen frecuentemente problemas de ingeniería donde se requiere el análisis dinámico de grandes modelos de elementos finitos que llegan a millones de grados de libertad y emplean volúmenes de datos de gran tamaño. La complejidad y dimensión de los análisis se dispara cuando se requiere realizar análisis paramétricos. Este problema se ha abordado tradicionalmente desde diversas perspectivas: en primer lugar, aumentando la capacidad tanto de cálculo como de memoria de los sistemas informáticos empleados en los análisis. En segundo lugar, se pueden simplificar los análisis paramétricos reduciendo su número o detalle y por último se puede recurrir a métodos complementarios a los elementos .nitos para la reducción de sus variables y la simplificación de su ejecución manteniendo los resultados obtenidos próximos al comportamiento real de la estructura. Se propone el empleo de un método de reducción que encaja en la tercera de las opciones y consiste en un análisis simplificado que proporciona una solución para la respuesta dinámica de una estructura en el subespacio modal complejo empleando un volumen de datos muy reducido. De este modo se pueden realizar análisis paramétricos variando múltiples parámetros, para obtener una solución muy aproximada al objetivo buscado. Se propone no solo la variación de propiedades locales de masa, rigidez y amortiguamiento sino la adición de grados de libertad a la estructura original para el cálculo de la respuesta tanto permanente como transitoria. Adicionalmente, su facilidad de implementación permite un control exhaustivo sobre las variables del problema y la implementación de mejoras como diferentes formas de obtención de los autovalores o la eliminación de las limitaciones de amortiguamiento en la estructura original. El objetivo del método se puede considerar similar a los que se obtienen al aplicar el método de Guyan u otras técnicas de reducción de modelos empleados en dinámica estructural. Sin embargo, aunque el método permite ser empleado en conjunción con otros para obtener las ventajas de ambos, el presente procedimiento no realiza la condensación del sistema de ecuaciones, sino que emplea la información del sistema de ecuaciones completa estudiando tan solo la respuesta en las variables apropiadas de los puntos de interés para el analista. Dicho interés puede surgir de la necesidad de obtener la respuesta de las grandes estructuras en unos puntos determinados o de la necesidad de modificar la estructura en zonas determinadas para cambiar su comportamiento (respuesta en aceleraciones, velocidades o desplazamientos) ante cargas dinámicas. Por lo tanto, el procedimiento está particularmente indicado para la selección del valor óptimo de varios parámetros en grandes estructuras (del orden de cientos de miles de modos) como pueden ser la localización de elementos introducidos, rigideces, masas o valores de amortiguamientos viscosos en estudios previos en los que diversas soluciones son planteadas y optimizadas, y que en el caso de grandes estructuras, pueden conllevar un número de simulaciones extremadamente elevado para alcanzar la solución óptima. Tras plantear las herramientas necesarias y desarrollar el procedimiento, se propone un caso de estudio para su aplicación al modelo de elementos .nitos del UAV MILANO desarrollado por el Instituto Nacional de Técnica Aeroespacial. A dicha estructura se le imponen ciertos requisitos al incorporar un equipo en aceleraciones en punta de ala izquierda y desplazamientos en punta de ala derecha en presencia de la sustentación producida por una ráfaga continua de viento de forma sinusoidal. La modificación propuesta consiste en la adición de un equipo en la punta de ala izquierda, bien mediante un anclaje rígido, bien unido mediante un sistema de reducción de la respuesta dinámica con propiedades de masa, rigidez y amortiguamiento variables. El estudio de los resultados obtenidos permite determinar la optimización de los parámetros del sistema de atenuación por medio de múltiples análisis dinámicos de forma que se cumplan de la mejor forma posible los requisitos impuestos con la modificación. Se comparan los resultados con los obtenidos mediante el uso de un programa comercial de análisis por el método de los elementos .nitos lográndose soluciones muy aproximadas entre el modelo completo y el reducido. La influencia de diversos factores como son el amortiguamiento modal de la estructura original, el número de modos retenidos en la truncatura o la precisión proporcionada por el barrido en frecuencia se analiza en detalle para, por último, señalar la eficiencia en términos de tiempo y volumen de datos de computación que ofrece el método propuesto en comparación con otras aproximaciones. Por lo tanto, puede concluirse que el método propuesto se considera una opción útil y eficiente para el análisis paramétrico de modificaciones locales en grandes estructuras. ABSTRACT When developing structural design and analysis some projects require dynamic analysis of large finite element models with millions of degrees of freedom which use large size data .les. The analysis complexity and size grow if a parametric analysis is required. This problem has been approached traditionally in several ways: one way is increasing the power and the storage capacity of computer systems involved in the analysis. Other obvious way is reducing the total amount of analyses and their details. Finally, complementary methods to finite element analysis can also be employed in order to limit the number of variables and to reduce the execution time keeping the results as close as possible to the actual behaviour of the structure. Following this third option, we propose a model reduction method that is based in a simplified analysis that supplies a solution for the dynamic response of the structure in the complex modal space using few data. Thereby, parametric analysis can be done varying multiple parameters so as to obtain a solution which complies with the desired objetive. We propose not only mass, stiffness and damping variations, but also addition of degrees of freedom to the original structure in order to calculate the transient and steady-state response. Additionally, the simple implementation of the procedure allows an in-depth control of the problem variables. Furthermore, improvements such as different ways to obtain eigenvectors or to remove damping limitations of the original structure are also possible. The purpose of the procedure is similar to that of using the Guyan or similar model order reduction techniques. However, in our method we do not perform a true model order reduction in the traditional sense. Furthermore, additional gains, which we do not explore herein, can be obtained through the combination of this method with traditional model-order reduction procedures. In our procedure we use the information of the whole system of equations is used but only those nodes of interest to the analyst are processed. That interest comes from the need to obtain the response of the structure at specific locations or from the need to modify the structure at some suitable positions in order to change its behaviour (acceleration, velocity or displacement response) under dynamic loads. Therefore, the procedure is particularly suitable for parametric optimization in large structures with >100000 normal modes such as position of new elements, stiffness, mass and viscous dampings in previous studies where different solutions are devised and optimized, and in the case of large structures, can carry an extremely high number of simulations to get the optimum solution. After the introduction of the required tools and the development of the procedure, a study case is proposed with use the finite element model (FEM) of the MILANO UAV developed by Instituto Nacional de Técnica Aeroespacial. Due to an equipment addition, certain acceleration and displacement requirements on left wing tip and right wing tip, respectively, are imposed. The structure is under a continuous sinusoidal wind gust which produces lift. The proposed modification consists of the addition of an equipment in left wing tip clamped through a rigid attachment or through a dynamic response reduction system with variable properties of mass, stiffness and damping. The analysis of the obtained results allows us to determine the optimized parametric by means of multiple dynamic analyses in a way such that the imposed requirements have been accomplished in the best possible way. The results achieved are compared with results from a commercial finite element analysis software, showing a good correlation. Influence of several factors such as the modal damping of the original structure, the number of modes kept in the modal truncation or the precission given by the frequency sweep is analyzed. Finally, the efficiency of the proposed method is addressed in tems of computational time and data size compared with other approaches. From the analyses performed, we can conclude that the proposed method is a useful and efficient option to perform parametric analysis of possible local modifications in large structures.
Resumo:
Architecture 2000, publicado por Charles Jencks originalmente en el año 1971, es un libro cuyo objetivo explícito es predecir el futuro de la arquitectura hasta el fi nal del siglo XX y este hecho ha favorecido que se haya editado por segunda vez precisamente ese emblemático año 2000, manteniendo fundamentalmente el contenido original, aunque añadiendo una introducción y un capítulo final en los que se ofrece una evaluación de lo dicho treinta años antes. En este nuevo Architecture 2000, Jencks añade al texto principal sus comentarios sobre lo acertado o erróneo de sus predicciones anteriores, juzgadas ahora a la luz de los hechos acontecidos y actualiza su mapa evolutivo con una nueva versión de su anterior Evolutionary Tree to the year 2000, que ahora pasará a denominarse Evolutionary Tree of the 20th century architecture. No hay duda de que lo más infl uyente y duradero de la obra de Jencks ha sido la representación gráfica de la evolución de la arquitectura a través de sus evolutionary trees. Pero, aunque Architecture 2000 debe ser valorada sobre todo como una aportación imprescindible para entender la arquitectura de la segunda mitad del siglo XX, tanto por su identifi cación de las tendencias a través de los que se han conducido las experiencias de los profesionales como por su concepción dinámica de la arquitectura plasmada gráfi camente a través de sus evolutionary trees, sería un error considerarla como mera historia y dar por amortizados los métodos prospectivos o los juicios y expectativas del autor sobre lo acontecido en la arquitectura a lo largo de las últimas décadas.
Resumo:
Infrastructure as a Service clouds are a flexible and fast way to obtain (virtual) resources as demand varies. Grids, on the other hand, are middleware platforms able to combine resources from different administrative domains for task execution. Clouds can be used by grids as providers of devices such as virtual machines, so they only use the resources they need. But this requires grids to be able to decide when to allocate and release those resources. Here we introduce and analyze by simulations an economic mechanism (a) to set resource prices and (b) resolve when to scale resources depending on the users’ demand. This system has a strong emphasis on fairness, so no user hinders the execution of other users’ tasks by getting too many resources. Our simulator is based on the well-known GridSim software for grid simulation, which we expand to simulate infrastructure clouds. The results show how the proposed system can successfully adapt the amount of allocated resources to the demand, while at the same time ensuring that resources are fairly shared among users.
Resumo:
We argüe that in order to exploit both Independent And- and Or-parallelism in Prolog programs there is advantage in recomputing some of the independent goals, as opposed to all their solutions being reused. We present an abstract model, called the Composition- Tree, for representing and-or parallelism in Prolog Programs. The Composition-tree closely mirrors sequential Prolog execution by recomputing some independent goals rather than fully re-using them. We also outline two environment representation techniques for And-Or parallel execution of full Prolog based on the Composition-tree model abstraction. We argüe that these techniques have advantages over earlier proposals for exploiting and-or parallelism in Prolog.
Resumo:
The Andorra family of languages (which includes the Andorra Kernel Language -AKL) is aimed, in principie, at simultaneously supporting the programming styles of Prolog and committed choice languages. On the other hand, AKL requires a somewhat detailed specification of control by the user. This could be avoided by programming in Prolog to run on AKL. However, Prolog programs cannot be executed directly on AKL. This is due to a number of factors, from more or less trivial syntactic differences to more involved issues such as the treatment of cut and making the exploitation of certain types of parallelism possible. This paper provides basic guidelines for constructing an automatic compiler of Prolog programs into AKL, which can bridge those differences. In addition to supporting Prolog, our style of translation achieves independent and-parallel execution where possible, which is relevant since this type of parallel execution preserves, through the translation, the user-perceived "complexity" of the original Prolog program.
Resumo:
The future Internet is expected to be composed of a mesh of interoperable web services accessible from all over the web. This approach has not yet caught on since global user?service interaction is still an open issue. This paper states one vision with regard to next-generation front-end Web 2.0 technology that will enable integrated access to services, contents and things in the future Internet. In this paper, we illustrate how front-ends that wrap traditional services and resources can be tailored to the needs of end users, converting end users into prosumers (creators and consumers of service-based applications). To do this, we propose an architecture that end users without programming skills can use to create front-ends, consult catalogues of resources tailored to their needs, easily integrate and coordinate front-ends and create composite applications to orchestrate services in their back-end. The paper includes a case study illustrating that current user-centred web development tools are at a very early stage of evolution. We provide statistical data on how the proposed architecture improves these tools. This paper is based on research conducted by the Service Front End (SFE) Open Alliance initiative.
Resumo:
Future high-quality consumer electronics will contain a number of applications running in a highly dynamic environment, and their execution will need to be efficiently arbitrated by the underlying platform software. The multimedia applications that currently execute in such similar contexts face frequent run-time variations in their resource demands, originated by the greedy nature of the multimedia processing itself. Changes in resource demands are triggered by numerous reasons (e.g. a switch in the input media compression format). Such situations require real-time adaptation mechanisms to adjust the system operation to the new requirements, and this must be done seamlessly to satisfy the user experience. One solution for efficiently managing application execution is to apply quality of service resource management techniques, based on assigning and enforcing resource contracts to applications. Most resource management solutions provide temporal isolation by enforcing resource assignments and avoiding any resource overruns. However, this has a clear limitation over the cost-effective resource usage. This paper presents a simple priority assignment scheme based on uniform priority bands to allow that greedy multimedia tasks incur in safe overruns that increase resource usage and do not threaten the timely execution of non-overrunning tasks. Experimental results show that the proposed priority assignment scheme in combination with a resource accounting mechanism preserves timely multimedia execution and delivery, achieves a higher cost-effective processor usage, and guarantees the execution isolation of non-overrunning tasks.
Resumo:
Data grid services have been used to deal with the increasing needs of applications in terms of data volume and throughput. The large scale, heterogeneity and dynamism of grid environments often make management and tuning of these data services very complex. Furthermore, current high-performance I/O approaches are characterized by their high complexity and specific features that usually require specialized administrator skills. Autonomic computing can help manage this complexity. The present paper describes an autonomic subsystem intended to provide self-management features aimed at efficiently reducing the I/O problem in a grid environment, thereby enhancing the quality of service (QoS) of data access and storage services in the grid. Our proposal takes into account that data produced in an I/O system is not usually immediately required. Therefore, performance improvements are related not only to current but also to any future I/O access, as the actual data access usually occurs later on. Nevertheless, the exact time of the next I/O operations is unknown. Thus, our approach proposes a long-term prediction designed to forecast the future workload of grid components. This enables the autonomic subsystem to determine the optimal data placement to improve both current and future I/O operations.