Self-assembled MgxZn1−xO quantum dots (0 ≤ x ≤ 1) on different substrates using spray pyrolysis methodology

By using the spray pyrolysis methodology in its classical configuration we have grown self-assembled MgxZn1−xO quantum dots (size [similar]4–6 nm) in the overall range of compositions 0 ≤ x ≤ 1 on c-sapphire, Si (100) and quartz substrates. Composition of the quantum dots was determined by means of transmission electron microscopy-energy dispersive X-ray analysis (TEM-EDAX) and X-ray photoelectron spectroscopy. Selected area electron diffraction reveals the growth of single phase hexagonal MgxZn1−xO quantum dots with composition 0 ≤ x ≤ 0.32 by using a nominal concentration of Mg in the range 0 to 45%. Onset of Mg concentration about 50% (nominal) forces the hexagonal lattice to undergo a phase transition from hexagonal to a cubic structure which resulted in the growth of hexagonal and cubic phases of MgxZn1−xO in the intermediate range of Mg concentrations 50 to 85% (0.39 ≤ x ≤ 0.77), whereas higher nominal concentration of Mg ≥ 90% (0.81 ≤ x ≤ 1) leads to the growth of single phase cubic MgxZn1−xO quantum dots. High resolution transmission electron microscopy and fast Fourier transform confirm the results and show clearly distinguishable hexagonal and cubic crystal structures of the respective quantum dots. A difference of 0.24 eV was detected between the core levels (Zn 2p and Mg 1s) measured in quantum dots with hexagonal and cubic structures by X-ray photoemission. The shift of these core levels can be explained in the frame of the different coordination of cations in the hexagonal and cubic configurations. Finally, the optical absorption measurements performed on single phase hexagonal MgxZn1−xO QDs exhibited a clear shift in optical energy gap on increasing the Mg concentration from 0 to 40%, which is explained as an effect of substitution of Zn2+ by Mg2+ in the ZnO lattice.

Differential Evoluiton - Particle Swarm Optimization

This paper shows the Particle Swarm Optimization algorithm with a Differential Evolution. Each candidate solution is sampled uniformly in [!5,5] D, whereDdenotes the search space dimension, and the evolution is performed with a classical PSO algorithm and a classical DE/x/1 algorithm according to a random threshold.

Effect of row orientation on soil water content and vine water status on a Cabernet franc vineyard in Madrid, spain

The aim of this study was to evaluate the effects of row orien¬tation on vine and soil water status in an irrigated vineyard. The trial was developed during 2006, 2007 and 2008, in the South East region of Madrid (Spain) on 5-year old Cabernet franc grapevines (Vitis vinifera L.) grafted onto 140Ru. Plant spacing was 2.5 m x 1.5 m and vines were trained to a VSP. Four orientations were stu¬died: North-South (N-S), East-West (E-W), Northeast-Southwest (N+45) and North-South +20o (N+20). Irrigation (0.4•ET0) started when shoot growth stopped. Soil water availability was measured using a TDR technique with forty buried probes. Row orientation did not have any effect on water consumption in the vineyard. At maturity, leaf water potential was measured at predawn, early mor¬ning, midday and 14:00 solar time, on both canopy sides - sun and shade – ; the early morning measurement was the one that better differentiated treatments. Leaf water potential was a good indica¬tor of plant water status. Differences between (N-S and E-W) and (N+20 and N+45) treatments were obtained both on sun and shade canopy sides, N+20 and N+45 having lower leaf water potentials then drier leaves. The water stress integral shows that N-S and E-W reach the end of maturation with a greater level of hydration than N+45 and N+20. As a whole, N+45 and N+20 orientations, without affecting too much the soil available water content, induce regularly more water stress to the vine at some periods, probably due to an higher sunlight interception in early morning which makes water limitation for the vine more early and thus more severe during the day.

Mejoras tecnológicas en el reciclado de residuos de construcción y demolición (RCD)

La tesis doctoral “Mejoras Tecnológicas en el Reciclado de Residuos de Construcción y Demolición (RCD)” investiga la utilización de los separadores hidráulicos para mejorar la calidad de los áridos reciclados, y se demuestra que es un equipo más eficiente que las técnicas actuales basadas en la simple separación por densidad. En la tesisn se ha realizado inicialmente una revisión de la situación del sector, para a continuación centrarse en los sistemas de separación utilizados en las plantas de valorización españolas. Una vez analizados éstos y en particular los de tipo hidráulico, de los que se resume un estudio comparativo, se ha procedido a ensayar a escala de Laboratorio el comportamiento de un separador hidráulico de aceleración diferencial con diversos materiales procedentes de tres plantas de reciclaje. Adicionalmente fueron probadas otras técnicas, como es la separación magnética para mejorar la calidad de los productos reciclados. En vista de los buenos resultados de la investigación, se procede a escalar los ensayos con equipo piloto y distintas composiciones de naturaleza cerámica y hormigón. El equipo utilizado fue un jig de 3´x 1´ en el que se ensayaron las tres muestras con resultados diferentes. La limpieza de los materiales impropios y el yeso fue positiva en las tres muestras, y únicamente la separación entre sí de los componentes pétreos, resultó dependiente de su proporción en la mezcla, obteniéndose los mejores resultados en las muestras con menor cantidad de materiales cerámicos. Finalmente, se procede a analizar en un laboratorio reconocido las propiedades de los áridos reciclados obtenidos en la separación hidráulica por jig, y constatar las mejoras conseguidas para su utilización como materiales de construcción en usos ligados y no ligados. Todo lo anterior permite afirmar que los equipos de separación hidráulica con aceleración diferencial (jig) presentan una innovación tecnológica en el reciclado de los residuos de construcción y demolición (RCD). ABSTRACT The doctoral thesis “Technological Improvements in Recycling of Construction and Demolition Waste (C&DW)” researches the hydraulic separators utilization in order to improve the recycled aggregates quality, demonstrating that the equipment is more efficient than the current techniques based on the simple density separation. This doctoral thesis has been initially done reviewing the situation of the sector and focusing afterwards on the separation systems used at the Spanish recovery facilities. Once analyzed these and, particularly, the hydraulic type ones, from which a comparative study has been summarized, the behavior of a differential acceleration hydraulic separator with various materials coming from three recycling plants has been tested at laboratory scale. Additionally other techniques have been tested, such as the magnetic separation to improve the quality of recycled products. In view of the good investigation results, the testing process scaled up by using pilot equipment and different ceramics and concrete compositions. The equipment utilized was a jig 3” x 1”, in which the three samples were tested with different results. The unsuitable materials and gypsum cleanliness was positive on the three samples and only the separation among the stony components turned out to be dependent of its proportion in the mixing, obtaining the best results in the samples with less quantity of ceramic materials. Finally, the properties of the recycled aggregates obtained by jig hydraulic separation are analyzed at a recognized laboratory and the improvements gained for their utilization as construction materials, in bounded and unbounded uses, are stated. The facts cited are a basis for affirming that the hydraulic separator equipments with differential acceleration (jig) offer a technological innovation in the Recycling of Construction and Demolition Waste (C&DW).

Towards the Natural Optimization with Particle Swarm Optimization.

This paper shows the Particle Swarm Optimization algorithm with a Differential Evolution. Each candidate solution is sampled in the interval [?5, 5] D where D indicates the dimension of the search space, and the evolution is performed with a classical PSO algorithm and a classical DE/x/1 algorithm according to a random threshold. Moreover, this paper provides concepts to deal with non-linear optimization through the use of PSO.

Li distribution characterization in Li-ion batteries positive electrodes containing LixNi0.8Co0.15Al0.05O2 secondary particles

The elemental distribution of as-received (non-charged) and charged Li-ion battery positive electrodes containing LixNi0.8Co0.15Al0.05O2 (0.75 ? x ? 1.0) microparticles as active material is characterized by combining μ-PIXE and μ-PIGE techniques. PIGE measurements evidence that the Li distribution is inhomogeneous (existence of Li-rich and Li-depleted regions) in as-received electrodes corresponding with the distribution of secondary particles but it is homogeneous within the studied individual secondary micro-particles. The dependence of the Li distribution on electrode thickness and on charging conditions is characterized by measuring the Li distribution maps in specifically fabricated cross-sectional samples. These data show that decreasing the electrode thickness down to 35 μm and charging the batteries at slow rate give rise to more homogeneous Li depth profiles.

Análisis de las diferencias en el crecimiento vegetativo, en los componentes del rendimiento y en la composición de las uvas y vinos del cv. cabernet sauvignon (vitis vinifera L.), producidos por el déficit hídrico durante pre-envero y post-envero

La presente Tesis Doctoral se realizó con el fin de estimar conjuntamente la respuesta agronómica y fisiológica de la vid (Vitis vinifera L.), así como los efectos sobre la evolución de la maduración, composición y la calidad de la uva y del vino, bajo la aplicación de diferentes déficit hídricos en pre-envero y post-envero, dentro de un marco de referencia de cambio climático. La variación climática que prevén los estudios sobre el cambio climático, resulta un factor decisivo en la eficiencia del uso del agua en la vid. En zonas cálidas, las estrategias de cultivo del viñedo frente al cambio climático deben de ir dirigidas a atenuar sus efectos sobre el crecimiento y el desarrollo de la vid, haciéndose imprescindible el estudio pormenorizado del déficit hídrico como factor decisivo en la obtención de las uvas adecuadas, ya que son la clave indispensable para el éxito en la elaboración del vino, y de forma muy especial en los vinos enfocados a un sector de alta calidad. El ensayo se llevó a cabo en un viñedo comercial de Bodegas Licinia, en la Comunidad de Madrid, durante los años 2010 y 2011. La variedad estudiada fue Cabernet sauvignon / 41 B, plantada a un marco de plantación de 3 m x 1 m, con un guiado vertical de la vegetación. El dispositivo experimental fue totalmente al azar, y se establecieron 4 tratamientos experimentales con 4 grados de disponibilidad hídrica, déficit moderado continuo (T0,45-0,6), déficit severo continuo (T0-0,3), déficit severo después de envero (T0,45-0,3) y déficit severo antes de envero (T0-0,6). En cada tratamiento se distribuyeron 3 repeticiones. El año 2010 fue el más lluvioso de los años de ensayo, con 478 mm de precipitaciones anuales, lo que supuso 146 mm más que en el año 2011. Su distribución a lo largo del ciclo fue más homogénea en el año 2010, mientras que en 2011 las precipitaciones contabilizadas en el período de maduración de la uva fueron nulas. La temperatura media subió 0,9ºC en 2011, respecto a 2010 y en cuanto a la integral térmica eficaz, en 2011 se acumularon, desde el 1 de abril hasta el final de ciclo, 217 grados•día más que en 2010. El déficit hídrico en pre-envero, modificó notablemente el crecimiento vegetativo y la producción de cosecha de la parcela de ensayo, no así la fertilidad de las yemas. El tratamiento con mayor disponibilidad hídrica (T0,45-0,6) obtuvo el mayor peso de baya, y los tratamientos con menor déficit hídrico en pre-envero (T0,45-0,6 y T0,45-0,3) registraron los mayores rendimientos de cosecha, mientras que las menores tasas de cuajado correspondieron al tratamiento con un déficit severo continuo (T0-0,3). La parcela de ensayo se caracterizó por un exceso de vigor y un alto crecimiento vegetativo. El pH del mosto se vio afectado por el déficit hídrico, disminuyendo su valor en el tratamiento de déficit hídrico severo antes de envero (T0-0,6). Organolépticamente, no se percibieron diferencias significativas en los vinos elaborados en función del déficit hídrico, y respecto a su composición físico-química, solo existieron diferencias en la concentración de ácido L-Málico, con mayores concentraciones en los tratamientos sin déficit hídrico en pre-envero, T0,45-0,6 y T0,45-0,3. El déficit hídrico modificó notablemente el color del vino, aumentando los valores de las coordenadas CIELAB a* y b*, la luminosidad (L*), croma (C*) y tonalidad (H*), para los tratamientos con un déficit severo en pre-envero (T0-0,3 y T0-0,6) y disminuyendo estas en el tratamiento con mayor disponibilidad hídrica (T0,45-0,6). Del mismo modo, mediante el análisis de color por métodos tradicionales, IPT e IC de los vinos, aumentó en los tratamientos con mayor déficit hídrico en pre-envero (T0-0,3 y T0-0,6), respecto a los tratamientos de mayor disponibilidad (T0,45-0,6 y T0,45-0,3). La concentración de taninos de la baya en vendimia, no se vio afectada por el déficit hídrico, aunque sí estuvo relacionada positivamente con el tamaño de las bayas. Organolépticamente, los hollejos del año 2011 resultaron con menor frescura, acidez, afrutado, sensación herbácea e intensidad tánica, aunque con mayor astringencia respecto a 2010. Las pepitas fueron más astringentes y aromáticas pero menos crujientes, sin llegar a los niveles de madurez del año 2010. El catador relacionó los taninos con la calidad del vino, asociándolos con un mayor cuerpo, acidez, intensidad, equilibrio gustativo, amargor y menor astringencia en la fase gustativa. La concentración de taninos en los vinos se vio favorecida con el déficit hídrico en pre-envero y post-envero. Los tratamientos con mayor déficit hídrico en pre-envero, T0-0,6 y T0-0,3, obtuvieron las menores concentraciones de potasio en mostos y vinos. Las relaciones entre la concentración de potasio, ácido L-Málico y el porcentaje de color rojo puro (dA(%)) resultaron altamente significativas, de modo que las mayores tasas de potasio en el vino se asociaron a los valores más bajos de color rojo y a los mayores de ácido L-Málico. ABSTRACT The present Doctoral Thesis has been done in order to estimate the grapevine (Vitis vinifera L.) agronomic and physiologic performance or response as well as the impact in the grape and wine maturity, composition and quality evolution, with different water deficits. The variation in climate that the global warming studies for seen is a key factor for the grapevine water use efficiency. In warm areas the farming vineyards strategy to face the climatic change, should be focused on diminish the effects on the grapevine growth and development, so that the water deficit detailed analysis becomes decisive to obtain the appropriate grapes, that are the main subject for a successful wine production and especially for top quality wines. The trial was carried out in a commercial vineyard in Chinchón (Madrid), Licinia winery, during the 2010 and 2011 seasons. The grape variety studied was Cabernet Sauvignon grafted onto 41B with a vine spacing 3m x 1m trained as VSP. Experimental design consisted on 4 irrigation treatments with 3 replications totally randomized. Irrigation treatments were: moderate regulated deficit (T0,45-0,6), severe continuous deficit (T0-0,3), severe post-veraison deficit (T0,45-0,3) and severe pre veraison deficit (T0-0,6). The 2010 was rainier year than the 2011; Total annual rain in 2010 was 478 mm, which resulted in 146 mm more than in 2011. The distribution along the vine cycle was more homogeneous in the 2010, whereas precipitations in 2011 along the grape maturity period were nonexistent. The average temperature in 2011 was 0,9ºC higher than that of the 2010 and regarding to the thermal integral, in the 2011 from 1st April to the end of the growing cycle, was 217 degrees•day higher than that in 2010. Water deficit significantly modified the vegetative growth and yield but, it did not modified bud fertility. The treatment with the highest water availability (T0,45-0,6) got the highest berry size, the lowest berry set rates were found in the severe continuous deficit treatment (T0-0,3). The plot studied in this trial was characterized by both excessive vigour and vegetative growth. Water deficit modified the pH must by, reducing it in the severe water deficit during pre-veraison (T0-0,6). There were not differences in wine tasting between the water deficits treatments. Regarding to the physical-chemical composition, it only existed differences in the L-malic acid concentration, resulting higher concentrations in the water deficit pre-veraison treatments: T0,45-0,6 y T0,45-0,3. Water deficit significantly modified wine colour by, increasing the CIELAB coordinates a* and b*, the brightness (L*), croma (C*) and tonality (H*), in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), and reducing them in the in the moderate continuous water deficit ones (T0,45-0,6). By means of traditional wine colour parameters analyses, red colour percentage, TPI, they became higher in the lower water availability pre-veraison treatments (T0-0,3 y T0-0,6), than in those with higher availability (T0,45-0,6 y T0,45-0,3). At harvest, berry tannins concentrations was not affected by the water deficit although it did in a positive way, in the berry size. Berry tasting in 2011, resulted in a lower freshness, acidity, fruity, herbaceous flavour and tannic intensity, but with higher astringency respect to the 2010 season. Seeds, in 2011, were more astringent and aromatic as in the 2010, but less crunchy, without getting to the point of maturity. The taster linked the tannins to wine quality, associating them with a higher bodiest wine, acidity, intensity, taste balance, bitterness and with a lower astringency in the tasting stage. Treatments with a higher water deficit up to veraison T0-0,6 y T0-0,3 got less musts and wines potassium concentration. The relation between L-malic acid and the full red color percentage (dA(%)), were highly related, resulting the higher potassium content the lower wine quality.

Effects of a bifenthrin-treated net on the natural enemies Aphidius colemani (Haliday) and Adalia bipunctata L. in a cucumber crop in Central Spain. Semi-field experiments

Pest management practices that rely on pesticides are growing increasingly less effective and environmentally inappropriate in many cases and the search of alternatives is under focus nowadays. Exclusion of pests from the crop by means of pesticide-treated screens can be an eco-friendly method to protect crops, especially if pests are vectors of important diseases. The mesh size of nets is crucial to determine if insects can eventually cross the barrier or exclude them because there is a great variation in insect size depending on the species. Long-lasting insecticide-treated (LLITN) nets, factory pre-treated, have been used since years to fight against mosquitoes vector of malaria and are able to retain their biological efficacy under field for 3 years. In agriculture, treated nets with different insecticides have shown efficacy in controlling some insects and mites, so they seem to be a good tool in helping to solve some pest problems. However, treated nets must be carefully evaluated because can diminish air flow, increase temperature and humidity and decrease light transmission, which may affect plant growth, pests and natural enemies. As biological control is considered a key factor in IPM nowadays, the potential negative effects of treated nets on natural enemies need to be studied carefully. In this work, the effects of a bifentrhin-treated net (3 g/Kg) (supplied by the company Intelligent Insect Control, IIC) on natural enemies of aphids were tested on a cucumber crop in Central Spain in autumn 2011. The crop was sown in 8x6.5 m tunnels divided in 2 sealed compartments with control or treated nets, which were simple yellow netting with 25 mesh (10 x 10 threads/cm2; 1 x 1 mm hole size). Pieces of 2 m high of the treated-net were placed along the lateral sides of one of the two tunnel compartments in each of the 3 available tunnels (replicates); the rest was covered by a commercial untreated net of a similar mesh. The pest, Aphis gossypii Glover (Aphidae), the parasitoid Aphidius colemani (Haliday) (Braconidae) and the predator Adalia bipunctata L. (Coccinellidae) were artificially introduced in the crop. Weekly sampling was done determining the presence or absence of the pest and the natural enemies (NE) in the 42 plants/compartment as well as the number of insects in 11 marked plants. Environmental conditions (temperature, relative humidity, UV and PAR radiation) were recorded. Results show that when aphids were artificially released inside the tunnels, neither its number/plant nor their distribution was affected by the treated net. A lack of negative effect of the insecticide-treated net on natural enemies was also observed. Adalia bipunctata did not establish in the crop and only a short term control of aphids was observed one week after release. On the other hand, A. colemani did establish in the crop and a more long-term effect on the numbers of aphids/plant was detected irrespective of the type of net. KEY WORDS: bifenthrin-treated net, Adalia bipunctata, Aphidius colemani, Aphis gossypii, semi-field