Biokerosene from Babassu and Camelina Oils: production and properties of their blends with fossil kerosene

Babassu and camelina oils have been transesterified with methanol by the classical homogeneous basic catalysis method with good yields. The babassu fatty acid methyl ester (FAME) has been subjected to fractional distillation at vacuum, and the low boiling point fraction has been blended with two types of fossil kerosene, a straight-run atmospheric distillation cut (hydrotreated) and a commercial Jet-A1. The camelina FAME has been blended with the fossil kerosene without previous distillation. The blends of babassu biokerosene and Jet-A1 have met some of the specifications selected for study of the ASTM D1655 standard: smoke point, density, flash point, cloud point, kinematic viscosity, oxidative stability and lower heating value. On the other hand, the blends of babassu biokerosene and atmospheric distillation cut only have met the density parameter and the oxidative stability. The blends of camelina FAME and atmospheric distillation cut have met the following specifications: density, kinematic viscosity at −20 °C, and lower heating value. With these preliminary results, it can be concluded that it would be feasible to blend babassu and camelina biokerosenes prepared in this way with commercial Jet-A1 up to 10 vol % of the former, if these blends prove to accomplish all the ASTM D1655-09 standards.

Learning Analytics and Interactions in Virtual Learning Environments. A Comparative Study of Typologies and their Relationship with Academic Performance

Analysis of learning data (learning analytics) is a new research field with high growth potential. The main objective of Learning analytics is the analysis of data (interactions being the basic data unit) generated in virtual learning environments, in order to maximize the outcomes of the learning process; however, a consensus has not been reached yet on which interactions must be measured and what is their influence on learning outcomes. This research is grounded on the study of e-learning interaction typologies and their relationship with students? academic performance, by means of a comparative study between different interaction typologies (based on the agents involved, frequency of use and participation mode). The main conclusions are a) that classifications based on agents offer a better explanation of academic performance; and b) that each of the three typologies are able to explain academic performance in terms of some of their components (student-teacher and student-student interactions, evaluating students interactions and active interactions, respectively), with the other components being nonrelevant.

Biokerosene from coconut, babassu, camelina and palm kernel oils: production and properties of their blends with fossil kerosene

On December 20th 2006 the European Commission approved a law proposal to include the civil aviation sector in the European market of carbon dioxide emission rights [European Union Emissions Trading System, EUETS). On July 8th 2009, the European Parliament and Conseil agreed that all flights leaving or landing in the EU airports starting from January 1st 2012 should be included in the EUETS. On November 19th 2008, the EU Directive 2008/101/CE [1] included the civil aviation activities in the EUETS, and this directive was transposed by the Spanish law 13/2010 of July 5th 2010 [2]. Thus, in 2012 the aviation sector should reduce their emissions to 97 % of the mean values registered in the period 2004-2006, and for 2013 these emission reductions should reach 95 % of the mean values for that same period. Trying to face this situation, the aviation companies are planning seriously the use of alternative jet fuels to reduce their greenhouse gas emissions and to lower their costs. However, some US airlines have issued a lawsuit before the European Court of Justice based in that this EU action violates a long standing worldwide aviation treaty, the Chicago convention of 1944, and also the Chinese aviation companies have rejected to pay any EU carbon dioxide tax [3]. Moreover, the USA Departments of Agriculture and Energy and the Navy will invest a total of up to $150 million over three years to spur production of aviation and marine biofuels for commercial and military applications [4]. However, the jet fuels should fulfill a set of extraordinarily sensitive properties to guarantee the safety of planes and passengers during all the flights.

Transcriptional changes and oxidative stress associated with the synergistic interaction between potato virus X and potato virus Y and their relationship with symptom expression.

Many virus diseases of economic importance to agriculture result from mixtures of different pathogens invading the host at a given time. This contrasts with the relatively scarce studies available on the molecular events associated with virus---host interactions in mixed infections. Compared with single infections, co-infection of Nicotiana benthamiana with Potato virus X (PVX) and Potato virus Y (PVY) resulted in increased systemic symptoms (synergism) that led to necrosis of the newly emerging leaves and death of the plant. A comparative transcriptional analysis was undertaken to identify quantitative and qualitative differences in gene expression during this synergistic infection and correlate these changes with the severe symptoms it caused. Global transcription profiles of doubly infected leaves were compared with those from singly infected leaves using gene ontology enrichment analysis and metabolic pathway annotator software. Functional gene categories altered by the double infection comprise suites of genes regulated coordinately, which are associated with chloroplast functions (downregulated), protein synthesis and degradation (upregulated), carbohydrate metabolism (upregulated), and response to biotic stimulus and stress (upregulated). The expressions of reactive oxygen species?generating enzymes as well as several mitogen-activated protein kinases were also significantly induced. Accordingly, synergistic infection induced a severe oxidative stress in N. benthamiana leaves, as judged by increases in lipid peroxidation and by the generation of superoxide radicals in chloroplasts, which correlated with the misregulation of antioxidative genes in microarray data. Interestingly, expression of genes encoding oxylipin biosynthesis was uniquely upregulated by the synergistic infection. Virus-induced gene silencing of ?-dioxygenase1 delayed cell death during PVX?PVY infection.

Changes in rumen microbes in sheep in response to dietary forage quality and relationships with fermentation characteristics

An in vitro experiment was carried out using the Hohenheim gas production technique to evaluate 24-h gas production, apparently and truly degraded dry matter (DM), partitioning factor (PF), short chain fatty acids, crude protein (CP) and carbohydrate (CHO) fractionation of grass and multipurpose tree species (MPTS) foliage diets. Four grasses and three MPTS were used to formulate 12 diets of equal mixtures (0.5:0.5 on DM basis) of each grass with each MPTS. In vitro gas production was terminated after 24 h for each diet. True DM degradability was measured from incubated samples and combined with gas volume to estimate PF. Diets had greater (P<0.001) CP (102–183 g/kg DM) content than sole grasses (66–131 g/kg DM) and lower (P<0.001) concentrations of fibre fractions. Contrary to in vitro apparently degraded DM, in vitro truly degraded DM coefficient was greater (P<0.001) in diets (0.63–0.77) than in sole grasses (0.48–0.68). The PF was on average higher in diets than in sole grasses. The proportion of potentially degradable CP fractions (A1, B1, B2 and B3, based on the Cornell Net Carbohydrate and Protein System) in the diets ranged from 971 to 989 g/kg CP. Crude protein fractions, A and B2 were greater in diets but B1 and B3 fractions were less in diets than in sole grasses. A similar trend was also observed in the CHO fractions. Results showed that the nutritive value of the four grasses was improved when MPTS leaves were incorporated into the diet and this could ensure higher productivity of the animals.

The major allergens of birch pollen and cow milk, Bet v 1 and Bos d 5, are structurally related to human licocalin 2, enabling them to manipulate T-helper cells depending on their load with siderophore-bound iron

We conclude that Bet v 1 and Bos d 5 not only structurally mimic human LCN2, but also functionally by their ability to bind iron via siderophores. The apo-forms promote Th2 cells, whereas the holo-forms appear to be immunosuppressive. These results provide for the first time a functional understanding on the principle of allergenicity of major allergens from entirely independent sources, like birch and milk.

Wind intermittency and CO2 reductions: the case of the spanish power system

Renewable energy sources are believed to reduce drastically greenhouse gas emissions that would otherwise be generated from fossil fuels used to generate electricity. This implies that a unit of renewable energy will replace a unit of fossil-fuel, with its CO2 emissions, on an equivalent basis (with no other effects on the grid). But, the fuel economy and emissions in the existing power systems are not proportional with the electricity production of intermittent sources due to cycling of the fossil fuel plants that make up the balance of the grid (i.e. changing the power output makes thermal units to operate less efficiently). This study focuses in the interactions between wind generation and thermal plants cycling, by establishing the levels of extra fuel use caused by decreased efficiencies of fossil back-up for wind electricity in Spain. We analyze the production of all thermal plants in 2011, studying different scenarios where wind penetration causes major deviations in programming, while we define a procedure for quantifying the carbon reductions by using emission factors and efficiency curves from the existing installations. The objectives are to discuss the real contributions of renewable energies to the environmental targets as well as suggest alternatives that would improve the reliability of future power systems.

Influence of local wind speed and direction on wind power dynamics - Application to offshore very short-term forecasting

Wind power time series usually show complex dynamics mainly due to non-linearities related to the wind physics and the power transformation process in wind farms. This article provides an approach to the incorporation of observed local variables (wind speed and direction) to model some of these effects by means of statistical models. To this end, a benchmarking between two different families of varying-coefficient models (regime-switching and conditional parametric models) is carried out. The case of the offshore wind farm of Horns Rev in Denmark has been considered. The analysis is focused on one-step ahead forecasting and a time series resolution of 10 min. It has been found that the local wind direction contributes to model some features of the prevailing winds, such as the impact of the wind direction on the wind variability, whereas the non-linearities related to the power transformation process can be introduced by considering the local wind speed. In both cases, conditional parametric models showed a better performance than the one achieved by the regime-switching strategy. The results attained reinforce the idea that each explanatory variable allows the modelling of different underlying effects in the dynamics of wind power time series.

Modelo explicativo de la relación entre productividad y valores organizacionales, en la PYME del sector metalúrgico y minero de Venezuela

Como consecuencia de los procesos de globalización el mundo empresarial está sometido a constantes cambios que han originado la necesidad en las empresas de evaluar su funcionamiento, con el objeto de adecuar su gestión a las mejores prácticas gerenciales y operativas, en función de adaptarse a las exigencias presentes en los escenarios en que están inmersas. La presente investigación tiene como propósito desarrollar un modelo explicativo de la relación entre la productividad y los valores organizacionales, teniendo como premisa los distintos planteamientos o teorías que destacan la importancia que tienen los valores organizacionales para que las empresas logren sus metas. Específicamente se tomó como referencia la clasificación de los valores organizacionales, que contempla el modelo de gestión de Dirección por Valores (DPV), de García y Dolan (2001). Las PYMES, al considerar el efecto que tienen los valores organizacionales en la productividad, pueden apoyar su gestión a través del compromiso de las personas para lograr los resultados de productividad que quieren o necesitan alcanzar. El abordaje del estudio se ha basado en la investigación explicativa, a través de la cual se exponen las razones de ocurrencia de un fenómeno o se muestran los mecanismos por los que se relacionan dos o más variables, lo que permitió conjugar definiciones y supuestos de las relaciones encontradas entre los valores organizacionales identificados de acuerdo a la opinión de los entrevistados y que resultaron ser significativos con los resultados de productividad que presentan las empresas que fueron objeto de esta investigación La población estuvo conformada por 40 empresas activas del sector metalúrgico y minero de Ciudad Guayana, Estado Bolívar, Venezuela, pertenecientes a la Asociación de Industriales Metalúrgicos y de Minería de la región Guayana (AIMM) y al directorio de la Cámara de Industriales y Mineros de Guayana. La muestra estudiada corresponde a 25 empresas que representan el 62% de la población. El proceso que se siguió para generar el modelo explicativo contempla tres etapas. La primera consiste en la fase descriptiva donde se recogió la información referente a la productividad de las empresas y a la determinación de los valores organizacionales identificados a través del análisis cualitativo de las entrevistas que se realizaron a los informantes de las empresas de la muestra. Para ello se utilizó el software Atlas ti 6.0. La segunda etapa, denominada comparativa, consistió en determinar la relación entre la productividad y los valores organizacionales, a través de las tablas de contingencias, de acuerdo con el grado de significancia que mostró el estadístico Chi- cuadrado. La tercera y última etapa del proceso es la fase explicativa que consistió en estimar la magnitud de la relación entre las variables productividad y valores organizacionales utilizando el coeficiente de contingencia de Pearson, y en establecer las asociaciones de acuerdo a las proximidades observadas que resultaron del análisis de correspondencias múltiples. Entre los hallazgos del estudio desarrollado se encontró que la productividad de las empresas puede fijarse en tres categorías: alta, media y baja y entre los factores que afectan a la productividad destacan, en el contexto externo: el gobierno, los clientes y los proveedores y en el contexto interno: la mano de obra, los materiales y los suministros. Según la opinión de los gerentes entrevistados, los valores organizacionales que caracterizan a las empresas del sector estudiado se agrupan en veintisiete categorías, que se clasifican en los siguientes componentes: entorno mercado, clientes, proveedores y otras empresas aliadas, medio ambiente, forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. Los valores organizacionales que resultaron ser significativos fueron la innovación, la honestidad y el orden y limpieza. La magnitud de la relación encontrada del valor innovación fue moderadamente fuerte. Se infiere que las empresas, al tener una Productividad baja, deciden innovar en el desarrollo de nuevos productos. El valor honestidad arrojó una relación moderadamente fuerte, determinando que las empresas de Productividad alta basan sus relaciones con los proveedores en la honestidad. Finalmente, el valor orden y limpieza muestra una relación moderadamente débil, lo que hace suponer que las empresas de Productividad media tienen alguna preferencia por mantener el orden y limpieza en las áreas de trabajo. El modelo explicativo de la relación entre productividad y valores organizacionales, en las PYMES del sector metalúrgico y minero de Ciudad Guayana, quedó conformado por los siguientes componentes: mercado, clientes, proveedores y otras empresas aliadas, y medio ambiente. No se encontraron relaciones en los componentes forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. ABSTRACT As a result of globalization processes, the business world is subject to constant change. This has resulted in the need for companies to evaluate their performance in order to adjust their processes to the best managerial and operational practices, with the goal to adapt to the demands present in the scenarios in which they are embedded. This research aimed to develop an explanatory model of the relationship between productivity and organizational values. In addition, it was based on the different approaches or theories that relate the importance for enterprises of the organizational values to achieve their goals. Specifically, reference was made to the classification of organizational values, which includes the model of Management by Values (DPV) following García and Dolan (1997). The SMEs, considering the effect of organizational values on productivity, can support their management through the commitment of their people to achieve productivity results that they want or need to accomplish. The study approach was based on explanatory research, which presents the reasons for occurrence of a phenomenon and the mechanisms through which two or more variables are related. This allowed to combine definitions and assumptions about the relationship found between organizational values and the productivity results of the companies that took part in this research. Organizational values were identified in the opinion of the managers interviewed, and were found to be significant with the productivity results. The population consisted of 40 active enterprises of the metallurgical and mining industry of Ciudad Guayana, Estado Bolivar, Venezuela. These enterprises were members of the Association of Metallurgical and Mining Industry of the Guayana Region (AIMM, by its acronym in Spanish) and the Directory of the Chamber of Industrial and Mining of Guayana. The sample of the study is comprised of 25 enterprises, which represent 62% of the total population. The process which has been followed to generate the explanatory model involves three stages. The first stage is the descriptive phase where the information about enterprises productivity and the determination of organizational values is gathered. These organizational values were identified by a qualitative analysis of the interviews conducted with managers of each enterprise. This analysis was performed using the Atlas ti 6.0 software. The second stage, denominated comparative, consisted in determining the relationship between productivity and organizational values through contingency tables, and according to the degree of significance showed by the Chi-Square, statistic. The third, and final stage of the process, is the explanatory phase. This consisted in estimating the magnitude of the relationship between productivity and organizational values variables using the Pearson's contingency coefficient. In addition, this stage comprises the establishment of the associations according to the observed proximities that resulted from the multiple correspondence analysis. Among the findings of this study, it was found that the productivity of enterprises can be set in three categories: high, medium and low. Additionally, it was found that in the external context the factors that stand out affecting productivity are: government policy, customers and suppliers, while in the domestic context they are: labor, materials and supplies. According to the opinion of the managers interviewed the organizational values that characterize the companies that were studied are grouped into twenty seven categories. These categories are classified into the following components: market environment, customers, suppliers and other allied companies, the environment, how Management deals with of the employees, way to work every day, and management of economic resources. Organizational values that were found to be significant were innovation, honesty and order and cleanliness. The magnitude of the relation of the innovation value was found to be moderately strong. It is inferred that companies that have low productivity decide to innovate in the development of new products. The honesty value showed a moderately strong relation, determining that high productivity enterprises base their relationships with suppliers on honesty. Lastly, the order and cleanliness value showed a moderately weak relation, which suggests that average productivity enterprises have a preference to maintain order and cleanliness in the work areas. The explanatory model of the relationship between productivity and organizational values, in the SMEs of the metallurgical and mining sector of Ciudad Guayana, was composed of the following components: market, customers, suppliers and other allied companies, and the environment. No relationships were found in the following components: how Management deals with employees, way to work every day, and management of economic resources.

Ecología política y economía de la visibilidad de los dispositivos tecnológicos de escala urbana durante el siglo XX Abriendo la caja negra

En paralelo a la superficie cotidiana de la ciudad moderna, discurre otra "ciudad invisible" o "caja negra" tecnológica, que opera, de manera silenciosa e imperceptible, al servicio de los ciudadanos. Paradójicamente, en este espacio invisible, se toman decisiones de la máxima relevancia para la ciudad: en la "caja negra", las ciudades pactan sus relaciones con la naturaleza; a través de ella, se produce la administración y distribución de los recursos que componen su metabolismo urbano. En definitiva, la "caja negra" es el conjunto de las arquitecturas donde se urbaniza la naturaleza, donde ésta pasa a ser ciudad. Y, sin embargo, ha tendido a permanecer invisible. No obstante, en el último tercio del siglo XX, se ha "abierto la caja negra" urbana y lo que era invisible ha dejado de serlo o, al menos, ha alterado su estatuto de visibilidad. El objetivo de esta tesis doctoral es evaluar las repercusiones arquitectónicas, urbanísticas y ecológicas, que conlleva este reciente fenómeno urbano que, desde hace unas décadas, está teniendo lugar en muchas de las ciudades herederas de las grandes reformas urbanas acometidas en las metrópolis europeas durante el siglo XIX, bajo el paradigma simbólico de un proyecto moderno "prometeico" y emancipador. Para abordar dicho análisis, se pondrán en relación dos parámetros urbanos elementales que han tendido a ser estudiados por separado. Por un lado, la "ecología política urbana", es decir, la red de relaciones socio-ecológicas que acontecen en la ciudad. Por otro lado, la "economía de la visibilidad", es decir, las formas de articular lo visible y lo invisible, en relación a los marcos de gobernanza. La intersección entre la "ecología política urbana" y la "economía de la visibilidad" proporciona un marco de análisis efectivo para comprender el fenómeno de la "apertura de la caja negra" y conlleva un cuestionamiento de algunas nociones dominantes en la teoría urbana y arquitectónica clásicas, como la segregación de la naturaleza, las infraestructuras y la sociedad o como las formas tradicionales de explotación ecológica del medio. Además, ofrece un criterio de análisis privilegiado para la comprensión del proceso de deslegitimación (filosófica, arquitectónica, económica, así como desde perspectivas ecológicas, sociales, de género o queer) de los modelos urbanísticos integrales modernos, herederos de los marcos antropocéntricos del siglo XIX. Por último, proporciona algunas herramientas arquitectónicas para afrontar los desafíos ecosistémicos del siglo XXI. A través del estudio de autores relevantes que han analizado esta problemática para la arquitectura, así como del estudio de casos arquitectónicos que han marcado hitos fundamentales en la consolidación urbana de los procesos asociados a la "caja negra", se concluirá que, en términos ecológicos, la ciudad moderna ha movilizado una "ecología política urbana" basada en fórmulas de sometimiento del entorno, a partir de operaciones arquitectónicas y tecnológicas invisibles. En esta tesis doctoral se estudiará la organización arquitectónica de las arquitecturas de la "caja negra" y se evaluará si el fenómeno de la "apertura de la caja negra" puede ser considerado como un síntoma de la alteración en la "ecología política urbana". 'Abriremos la caja negra" para estudiar cómo se integran en el espacio urbano los dispositivos tecnológicos de escala urbana, toda vez éstos han dejado de ser invisibles. Cómo participan, como un actor más, en la configuración de otros marcos de cohabitación, dentro de la ciudad contemporánea. ABSTRACT An 'invisible city' or technological 'black box' runs parallel to the day-to-day surface of modern cities, remaining silent, unnoticed, at the service of the citizenry. Paradoxically, this invisible space is where some of the most relevant decisions concerning the city are made: the 'black box' is where cities agree on their relationships with nature; it is used to manage and distribute the resources that form its urban metabolism. In short, the 'black box' is the collection of architectures where nature is urbanised, where it becomes a city. And in spite of all this, it has mostly remained invisible. Nevertheless, this urban 'black box' was opened during the last third of the 20th century, so what used to be invisible is invisible no more, or at least the laws governing its visibility have been altered. The purpose of this doctoral thesis is to evaluate the architectural, urban planning and ecological repercussions of this recent urban phenomenon that has been taking place for several decades in many of the cities that followed in the footsteps of the large European metropolises of the 19th century, under the symbolic paradigm of a modern 'prometheic' and emancipating project. This analysis shall be done by juxtaposing two basic urban parameters that in general have been studied separately: frstly the ‘urban political ecology', that is, the network of socio-ecological relationships within the city. Secondly, the 'economy of visibility', that is, the way the visible and invisible spheres are structured in relation with the governance frameworks. The intersection between the 'urban political ecology' and the 'economy of visibility' provides an effective analysis framework to understand the phenomenon of the 'opening of the black box'. It entails calling into question some of the predominant notions in classical urban and architectural theory, such as the segregation of nature, infrastructures and society, or the traditional forms of ecological usage of the environment. It also offers an exceptional analysis criterion to understand the discrediting process (from a philosophical, architectural, economic perspective, but also from the point of view of ecology, society, gender or queerness) of modern all-encompassing urban models that draw from the anthropocentric frameworks of the 19th century. Finally, it provides some architectural tools to tackle 21st-century ecosystemic challenges. The study of relevant authors that have analysed these problems for architecture, as well as the study of milestone architectural cases for the urban consolidation of processes associated to the 'black box', shall serve to reach the conclusion that, in ecological terms, modern cities have mobilised an 'urban political ecology' based on formulas of subjugation of the environment, through invisible architectural and technological operations. This thesis shall present an evaluation of whether the phenomenon of the 'opening of the black box' can be considered a symptom of the alteration of the 'urban political ecology'. We shall 'open the black box' to study the integration of the various urbanscale technological devices within the urban landscape, now that they have ceased to be invisible. We shall see how they participate, like any other actor, in the confguration of other cohabitation frameworks within today's cities.

Towards Mapping Experience Design for the Internet of Things.

We are witnessing a fundamental transformation in how Internet of Things (IoT) is having an impact on the experience users have with data-driven devices, smart appliances, and connected products. The experience of any place is commonly defined as the result of a series of user engagements with a surrounding place in order to carry out daily activities (Golledge, 2002). Knowing about users? experiences becomes vital to the process of designing a map. In the near future, a user will be able to interact directly with any IoT device placed in his surrounding place and very little is known on what kinds of interactions and experiences a map might offer (Roth, 2015). The main challenge is to develop an experience design process to devise maps capable of supporting different user experience dimensions such as cognitive, sensory-physical, affective, and social (Tussyadiah and Zach, 2012). For example, in a smart city of the future, the IoT devices allowing a multimodal interaction with a map could help tourists in the assimilation of their knowledge about points of interest (cognitive experience), their association of sounds and smells to these places (sensory-physical experience), their emotional connection to them (affective experience) and their relationships with other nearby tourists (social experience). This paper aims to describe a conceptual framework for developing a Mapping Experience Design (MXD) process for building maps for smart connected places of the future. Our MXD process is focussed on the cognitive dimension of an experience in which a person perceives a place as a "living entity" that uses and feeds through his experiences. We want to help people to undergo a meaningful experience of a place through mapping what is being communicated during their interactions with the IoT devices situated in this place. Our purpose is to understand how maps can support a person?s experience in making better decisions in real-time.

Transport and mixing enhancement in fluid-thermal microsystems

En esta tesis se investiga de forma experimental el transporte pasivo de magnitudes físicas en micro-sistemas con carácter de inmediata aplicación industrial, usando métodos innovadores para mejorar la eficiencia de los mismos optimizando parámetros críticos del diseño o encontrar nuevos destinos de posible aplicación. Parte de los resultados obtenidos en estos experimentos han sido publicados en revistas con un índice de impacto tal que pertenecen al primer cuarto del JCR. Primero de todo se ha analizado el efecto que produce en un intercambiador de calor basado en micro-canales el hecho de dejar un espacio entre canales y tapa superior para la interconexión de los mismos. Esto genera efectos tridimensionales que mejoran la exracción de calor del intercambiador y reducen la caída de presión que aparece por el transcurso del fluido a través de los micro-canales, lo que tiene un gran impacto en la potencia que ha de suministrar la bomba de refrigerante. Se ha analizado también la mejora producida en términos de calor disipado de un micro-procesador refrigerado con un ampliamente usado plato de aletas al implementar en éste una cámara de vapor que almacena un fluido bifásico. Se ha desarrollado de forma paralela un modelo numérico para optimizar las nuevas dimensiones del plato de aletas modificado compatibles con una serie de requerimientos de diseño en el que tanto las dimensiones como el peso juegan un papel esencial. Por otro lado, se han estudiado los fenomenos fluido-dinámicos que aparecen aguas abajo de un cuerpo romo en el seno de un fluido fluyendo por un canal con una alta relación de bloqueo. Los resultados de este estudio confirman, de forma experimental, la existencia de un régimen intermedio, caracterizado por el desarrollo de una burbuja de recirculación oscilante entre los regímenes, bien diferenciados, de burbuja de recirculación estacionaria y calle de torbellinos de Karman, como función del número de Reynolds del flujo incidente. Para la obtención, análisis y post-proceso de los datos, se ha contado con la ayuda de un sistema de Velocimetría por Imágenes de Partículas (PIV). Finalmente y como adición a este último punto, se ha estudiado las vibraciones de un cuerpo romo producidas por el desprendimiento de torbellinos en un canal de alta relación de bloqueo con la base obtenida del estudio anterior. El prisma se mueve con un movimiento armónico simple para un intervalo de números de Reynolds y este movimiento se transforma en vibración alrededor de su eje a partir de un ciero número de Reynolds. En relación al fluido, el régimen de desprendimiento de torbellinos se alcanza a menores números de Reynolds que en el caso de tener el cuerpo romo fijo. Uniendo estos dos registros de movimientos y variando la relación de masas entre prisma y fluido se obtiene un mapa con diferentes estados globales del sistema. Esto no solo tiene aplicación como método para promover el mezclado sino también como método para obtener energía a partir del movimiento del cuerpo en el seno del fluido. Abstract In this thesis, experimental research focused on passive scalar transport is performed in micro-systems with marked sense of industrial application, using innovative methods in order to obtain better performances optimizing critical design parameters or finding new utilities. Part of the results obtained in these experiments have been published into high impact factor journals belonged to the first quarter of the Journal Citation Reports (JCR). First of all the effect of tip clearance in a micro-channel based heat sink is analyzed. Leaving a gap between channels and top cover, letting the channels communicate each other causes three-dimensional effects which improve the heat transfer between fluid and heat sink and also reducing the pressure drop caused by the fluid passing through the micro-channels which has a great impact on the total cooling pumping power needed. It is also analyzed the enhancement produced in terms of dissipated heat in a micro-processor cooling system by improving the predominantly used fin plate with a vapour chamber based heat spreader which contains a two-phase fluid inside. It has also been developed at the same time a numerical model to optimize the new fin plate dimensions compatible with a series of design requirements in which both size and wight plays a very restrictive role. On the other hand, fluid-dynamics phenomena that appears downstream of a bluff body in the bosom of a fluid flow with high blockage ratio has been studied. This research experimentally confirms the existence of an intermediate regime characterized by an oscillating closed recirculation bubble intermediate regime between the steady closed recirculation bubble regime and the vortex shedding regime (Karman street like regime) as a function of the incoming flow Reynolds number. A particle image velocimetry technique (PIV) has been used in order to obtain, analyze and post-process the fluid-dynamic data. Finally and as an addition to the last point, a study on the vortexinduced vibrations (VIV) of a bluff body inside a high blockage ratio channel has been carried out taking advantage of the results obtained with the fixed square prism. The prism moves with simple harmonic motion for a Reynolds number interval and this movement becomes vibrational around its axial axis after overcoming at definite Reynolds number. Regarding the fluid, vortex shedding regime is reached at Reynolds numbers lower than the previous critical ones. Merging both movement spectra and varying the square prism to fluid mass ratio, a map with different global states is reached. This is not only applicable as a mixing enhancement technique but as an energy harvesting method.

Levels, sources and seasonality of coarse particles (PM10-PM2.5) in three European capitals e implications for particulate pollution control

Coarse particles of aerodynamic diameter between 2.5 and 10 mm (PMc) are produced by a range of natural (windblown dust and sea sprays) and anthropogenic processes (non-exhaust vehicle emissions, industrial, agriculture, construction and quarrying activities). Although current ambient air quality regulations focus on PM2.5 and PM10, coarse particles are of interest from a public health point of view as they have been associated with certain mortality and morbidity outcomes. In this paper, an analysis of coarse particle levels in three European capitals (London, Madrid and Athens) is presented and discussed. For all three cities we analysed data from both traffic and urban background monitoring sites. The results showed that the levels of coarse particles present significant seasonal, weekly and daily variability. Their wind driven and non-wind driven resuspension as well as their roadside increment due to traffic were estimated. Both the local meteorological conditions and the air mass history indicating long-range atmospheric transport of particles of natural origin are significant parameters that influence the levels of coarse particles in the three cities especially during episodic events.

Comparing linear and non linear wind flow models

Assessing wind conditions on complex terrain has become a hard task as terrain complexity increases. That is why there is a need to extrapolate in a reliable manner some wind parameters that determine wind farms viability such as annual average wind speed at all hub heights as well as turbulence intensities. The development of these tasks began in the early 90´s with the widely used linear model WAsP and WAsP Engineering especially designed for simple terrain with remarkable results on them but not so good on complex orographies. Simultaneously non-linearized Navier Stokes solvers have been rapidly developed in the last decade through CFD (Computational Fluid Dynamics) codes allowing simulating atmospheric boundary layer flows over steep complex terrain more accurately reducing uncertainties. This paper describes the features of these models by validating them through meteorological masts installed in a highly complex terrain. The study compares the results of the mentioned models in terms of wind speed and turbulence intensity.

Simulation of wind farms in flat and complex terrain using CFD

Use of computational fluid dynamic (CFD) methods to predict the power production from wind entire wind farms in flat and complex terrain is presented in this paper. Two full 3D Navier–Stokes solvers for incompressible flow are employed that incorporate the k–ε and k–ω turbulence models respectively. The wind turbines (W/Ts) are modelled as momentum absorbers by means of their thrust coefficient using the actuator disk approach. The WT thrust is estimated using the wind speed one diameter upstream of the rotor at hub height. An alternative method that employs an induction-factor based concept is also tested. This method features the advantage of not utilizing the wind speed at a specific distance from the rotor disk, which is a doubtful approximation when a W/T is located in the wake of another and/or the terrain is complex. To account for the underestimation of the near wake deficit, a correction is introduced to the turbulence model. The turbulence time scale is bounded using the general “realizability” constraint for the turbulent velocities. Application is made on two wind farms, a five-machine one located in flat terrain and another 43-machine one located in complex terrain. In the flat terrain case, the combination of the induction factor method along with the turbulence correction provides satisfactory results. In the complex terrain case, there are some significant discrepancies with the measurements, which are discussed. In this case, the induction factor method does not provide satisfactory results.