Differential invariants of second-order ordinary differential equations

The notion of a differential invariant for systems of second-order differential equations on a manifold M with respect to the group of vertical automorphisms of the projection is de?ned and the Chern connection attached to a SODE allows one to determine a basis for second-order differential invariants of a SODE.

Deriving the full-reducing Krivine machine from the small-step operational semantics of normal order

We derive by program transformation Pierre Crégut s full-reducing Krivine machine KN from the structural operational semantics of the normal order reduction strategy in a closure-converted pure lambda calculus. We thus establish the correspondence between the strategy and the machine, and showcase our technique for deriving full-reducing abstract machines. Actually, the machine we obtain is a slightly optimised version that can work with open terms and may be used in implementations of proof assistants.

Analysis of plate bending by means of high order finite hyperelements

The possibilities and limitations of high order hyperelements in plate bending analysis are discussed. Explicit shape functions for some types of triangular elements are given. These elements are applied to simple cases to assess their computational efficiency.

Integrability of second-order Lagrangians admitting a first-order Hamiltonian formalism

Second-order Lagrangian densities admitting a first-order Hamiltonian formalism are studied; namely, i) necessary and sufficient conditions for the Poincaré–Cartan form of a second-order Lagrangian on an arbitrary fibred manifold p : E → N to be projectable onto J 1 E are explicitly determined; ii) for each of such Lagrangians, a first-order Hamiltonian formalism is developed and a new notion of regularity is introduced; iii) the variational problems of this class defined by regular Lagrangians areprovedtobeinvolutive

InfIuence of wave induced second-order forces in semisubmersible fowt mooring design

The main focus of this paper is on hydrodynamic modelling of a semisubmersible platform (which can support a 1.5MW wind turbine and is composed by three buoyant columns connected by bracings) with especial emphasis on the estimation of the wave drift components and their effects on the design of the mooring system. Indeed, with natural periods of drift around 60 seconds, accurate computation of the low-frequency second-order components is not a straightforward task. As methods usually adopted when dealing with the slow-drifts of deep-water moored systems, such as Newman?s approximation, have their errors increased by the relatively low resonant periods, and as the effects of depth cannot be ignored, the wave diffraction analysis must be based on full Quadratic Transfer Functions (QTF) computations. A discussion on the numerical aspects of performing such computations is presented, making use of the second-order module available with the seakeeping software WAMIT®. Finally, the paper also provides a preliminary verification of the accuracy of the numerical predictions based on the results obtained in a series of model tests with the structure fixed in bichromatic waves.

A management model for closed-loop supply chains of reusable articles

This PhD dissertation is framed in the emergent fields of Reverse Logistics and ClosedLoop Supply Chain (CLSC) management. This subarea of supply chain management has gained researchers and practitioners' attention over the last 15 years to become a fully recognized subdiscipline of the Operations Management field. More specifically, among all the activities that are included within the CLSC area, the focus of this dissertation is centered in direct reuse aspects. The main contribution of this dissertation to current knowledge is twofold. First, a framework for the so-called reuse CLSC is developed. This conceptual model is grounded in a set of six case studies conducted by the author in real industrial settings. The model has also been contrasted with existing literature and with academic and professional experts on the topic as well. The framework encompasses four building blocks. In the first block, a typology for reusable articles is put forward, distinguishing between Returnable Transport Items (RTI), Reusable Packaging Materials (RPM), and Reusable Products (RP). In the second block, the common characteristics that render reuse CLSC difficult to manage from a logistical standpoint are identified, namely: fleet shrinkage, significant investment and limited visibility. In the third block, the main problems arising in the management of reuse CLSC are analyzed, such as: (1) define fleet size dimension, (2) control cycle time and promote articles rotation, (3) control return rate and prevent shrinkage, (4) define purchase policies for new articles, (5) plan and control reconditioning activities, and (6) balance inventory between depots. Finally, in the fourth block some solutions to those issues are developed. Firstly, problems (2) and (3) are addressed through the comparative analysis of alternative strategies for controlling cycle time and return rate. Secondly, a methodology for calculating the required fleet size is elaborated (problem (1)). This methodology is valid for different configurations of the physical flows in the reuse CLSC. Likewise, some directions are pointed out for further development of a similar method for defining purchase policies for new articles (problem (4)). The second main contribution of this dissertation is embedded in the solutions part (block 4) of the conceptual framework and comprises a two-level decision problem integrating two mixed integer linear programming (MILP) models that have been formulated and solved to optimality using AIMMS as modeling language, CPLEX as solver and Excel spreadsheet for data introduction and output presentation. The results obtained are analyzed in order to measure in a client-supplier system the economic impact of two alternative control strategies (recovery policies) in the context of reuse. In addition, the models support decision-making regarding the selection of the appropriate recovery policy against the characteristics of demand pattern and the structure of the relevant costs in the system. The triangulation of methods used in this thesis has enabled to address the same research topic with different approaches and thus, the robustness of the results obtained is strengthened.

Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Comparison of natural and forced amplification regimes in plasma-based soft-x-ray lasers seeded by high-order harmonic

The amplification of high-order harmonics (HOH) in a plasma-based amplifier is a multiscale, temporal phenomenon that couples plasma hydrodynamics, atomic processes, and HOH electromagnetic fields. We use a one-dimensional, time-dependent Maxwell-Bloch code to compare the natural amplification regime and another regime where plasma polarization is constantly forced by the HOH. In this regime, a 10-MW (i.e., 100 times higher than current seeded soft x-ray laser power), 1.5-μJ, 140-fs pulse free from the parasitic temporal structures appearing on the natural amplification regime can be obtained.

Prediction of wake effects on wind farm power production using a RANS approach. Part II. Offshore: Case studies from the UPWIND project

The estimation of power losses due to wind turbine wakes is crucial to understanding overall wind farm economics. This is especially true for large offshore wind farms, as it represents the primary source of losses in available power, given the regular arrangement of rotors, their generally largerdiameter and the lower ambient turbulence level, all of which conspire to dramatically affect wake expansion and, consequently, the power deficit. Simulation of wake effects in offshore wind farms (in reasonable computational time) is currently feasible using CFD tools. An elliptic CFD model basedon the actuator disk method and various RANS turbulence closure schemes is tested and validated using power ratios extracted from Horns Rev and Nysted wind farms, collected as part of the EU-funded UPWIND project. The primary focus of the present work is on turbulence modeling, as turbulent mixing is the main mechanism for flow recovery inside wind farms. A higher-order approach, based on the anisotropic RSM model, is tested to better take into account the imbalance in the length scales inside and outside of the wake, not well reproduced by current two-equation closure schemes.

Lithologic Control on the Scaling Properties of the First-Order Streams of Drainage Networks: A Monofractal Analysis

The movement of water through the landscape can be investigated at different scales. This study dealt with the interrelation between bedrock lithology and the geometry of the overlying drainage systems. Parameters of fractal analysis, such as fractal dimension and lacunarity, were used to measure and quantify this relationship. The interrelation between bedrock lithology and the geometry of the drainage systems has been widely studied in the last decades. The quantification of this linkage has not yet been clearly established. Several studies have selected river basins or regularly shaped areas as study units, assuming them to be lithologically homogeneous. This study considered irregular distributions of rock types, establishing areas of the soil map (1:25,000) with the same lithologic information as study units. The tectonic stability and the low climatic variability of the study region allowed effective investigation of the lithologic controls on the drainage networks developed on the plutonic rocks, the metamorphic rocks, and the sedimentary materials existing in the study area. To exclude the effect of multiple in- and outflows in the lithologically homogeneous units, we focused this study on the first-order streams of the drainage networks. The geometry of the hydrologic features was quantified through traditional metrics of fluvial geomorphology and scaling parameters of fractal analysis, such as the fractal dimension, the reference density, and the lacunarity. The results demonstrate the scale invariance of both the drainage networks and the set of first-order streams at the study scale and a relationship between scaling in the lithology and the drainage network.

A technological framework based on automatic messaging for improving adherence of diabetic patients

En todo el mundo se ha observado un crecimiento exponencial en la incidencia de enfermedades crónicas como la hipertensión y enfermedades cardiovasculares y respiratorias, así como la diabetes mellitus, que causa un número de muertes cada vez mayor en todo el mundo (Beaglehole et al., 2008). En concreto, la prevalencia de diabetes mellitus (DM) está aumentando de manera considerable en todas las edades y representa un serio problema de salud mundial. La diabetes fue la responsable directa de 1,5 millones de muertes en 2012 y 89 millones de años de vida ajustados por discapacidad (AVAD) (OMS, 2014). Uno de los principales dilemas que suelen asociarse a la gestión de EC es la adherencia de los pacientes a los tratamientos, que representa un aspecto multifactorial que necesita asistencia en lo relativo a: educación, autogestión, interacción entre los pacientes y cuidadores y compromiso de los pacientes. Medir la adherencia del tratamiento es complicado y, aunque se ha hablado ampliamente de ello, aún no hay soluciones “de oro” (Reviews, 2002). El compromiso de los pacientes, a través de la participación, colaboración, negociación y a veces del compromiso firme, aumentan las oportunidades para una terapia óptima en la que los pacientes se responsabilizan de su parte en la ecuación de adherencia. Comprometer e involucrar a los pacientes diabéticos en las decisiones de su tratamiento, junto con expertos profesionales, puede ayudar a favorecer un enfoque centrado en el paciente hacia la atención a la diabetes (Martin et al., 2005). La motivación y atribución de poder de los pacientes son quizás los dos factores interventores más relevantes que afectan directamente a la autogestión de la atención a la diabetes. Se ha demostrado que estos dos factores desempeñan un papel fundamental en la adherencia a la prescripción, así como en el fomento exitoso de un estilo de vida sana y otros cambios de conducta (Heneghan et al., 2013). Un plan de educación personalizada es indispensable para proporcionarle al paciente las herramientas adecuadas que necesita para la autogestión efectiva de la enfermedad (El-Gayar et al. 2013). La comunicación efectiva es fundamental para proporcionar una atención centrada en el paciente puesto que influye en las conductas y actitudes hacia un problema de salud ((Frampton et al. 2008). En este sentido, la interactividad, la frecuencia, la temporalización y la adaptación de los mensajes de texto pueden promover la adherencia a un régimen de medicación. Como consecuencia, adaptar los mensajes de texto a los pacientes puede resultar ser una manera de hacer que las sugerencias y la información sean más relevantes y efectivas (Nundy et al. 2013). En este contexto, las tecnologías móviles en el ámbito de la salud (mHealth) están desempeñando un papel importante al conectar con pacientes para mejorar la adherencia a medicamentos recetados (Krishna et al., 2009). La adaptación de los mensajes de texto específicos de diabetes sigue siendo un área de oportunidad para mejorar la adherencia a la medicación y ofrecer motivación a adultos con diabetes. Sin embargo, se necesita más investigación para entender totalmente su eficacia. Los consejos de texto personalizados han demostrado causar un impacto positivo en la atribución de poder a los pacientes, su autogestión y su adherencia a la prescripción (Gatwood et al., 2014). mHealth se puede utilizar para ofrecer programas de asistencia de autogestión a los pacientes con diabetes y, al mismo tiempo, superar las dificultades técnicas y financieras que supone el tratamiento de la diabetes (Free at al., 2013). El objetivo principal de este trabajo de investigación es demostrar que un marco tecnológico basado en las teorías de cambios de conducta, aplicado al campo de la mHealth, permite una mejora de la adherencia al tratamiento en pacientes diabéticos. Como método de definición de una solución tecnológica, se han adoptado un conjunto de diferentes técnicas de conducta validadas denominado marco de compromiso de retroacción conductual (EBF, por sus siglas en inglés) para formular los mensajes, guiar el contenido y evaluar los resultados. Los estudios incorporan elementos del modelo transteórico (TTM, por sus siglas en inglés), la teoría de la fijación de objetivos (GST, por sus siglas en inglés) y los principios de comunicación sanitaria persuasiva y eficaz. Como concepto general, el modelo TTM ayuda a los pacientes a progresar a su próxima fase de conducta a través de mensajes de texto motivados específicos y permite que el médico identifique la fase actual y adapte sus estrategias individualmente. Además, se adoptan las directrices del TTM para fijar objetivos personalizados a un nivel apropiado a la fase de cambio del paciente. La GST encierra normas que van a ponerse en práctica para promover la intervención educativa y objetivos de pérdida de peso. Finalmente, los principios de comunicación sanitaria persuasiva y eficaz aplicados a la aparición de los mensajes se han puesto en marcha para aumentar la efectividad. El EBF tiene como objetivo ayudar a los pacientes a mejorar su adherencia a la prescripción y encaminarlos a una mejora general en la autogestión de la diabetes mediante mensajes de texto personalizados denominados mensajes de retroacción automáticos (AFM, por sus siglas en inglés). Después de una primera revisión del perfil, consistente en identificar características significativas del paciente basadas en las necesidades de tratamiento, actitudes y conductas de atención sanitaria, el sistema elige los AFM personalizados, los aprueba el médico y al final se transfieren a la interfaz del paciente. Durante el tratamiento, el usuario recopila los datos en dispositivos de monitorización de pacientes (PMD, por sus siglas en inglés) de una serie de dispositivos médicos y registros manuales. Los registros consisten en la toma de medicación, dieta y actividad física y tareas de aprendizaje y control de la medida del metabolismo. El compromiso general del paciente se comprueba al estimar el uso del sistema y la adherencia del tratamiento y el estado de los objetivos del paciente a corto y largo plazo. El módulo de análisis conductual, que consiste en una serie de reglas y ecuaciones, calcula la conducta del paciente. Tras lograr el análisis conductual, el módulo de gestión de AFM actualiza la lista de AFM y la configuración de los envíos. Las actualizaciones incluyen el número, el tipo y la frecuencia de mensajes. Los AFM los revisa periódicamente el médico que también participa en el perfeccionamiento del tratamiento, adaptado a la fase transteórica actual. Los AFM se segmentan en distintas categorías y niveles y los pacientes pueden ajustar la entrega del mensaje de acuerdo con sus necesidades personales. El EBF se ha puesto en marcha integrado dentro del sistema METABO, diseñado para facilitar al paciente diabético que controle sus condiciones relevantes de una manera menos intrusiva. El dispositivo del paciente se vincula en una plataforma móvil, mientras que una interfaz de panel médico permite que los profesionales controlen la evolución del tratamiento. Herramientas específicas posibilitan que los profesionales comprueben la adherencia del paciente y actualicen la gestión de envíos de AFM. El EBF fue probado en un proyecto piloto controlado de manera aleatoria. El principal objetivo era examinar la viabilidad y aceptación del sistema. Los objetivos secundarios eran también la evaluación de la eficacia del sistema en lo referente a la mejora de la adherencia, el control glucémico y la calidad de vida. Se reclutaron participantes de cuatro centros clínicos distintos en Europa. La evaluación del punto de referencia incluía datos demográficos, estado de la diabetes, información del perfil, conocimiento de la diabetes en general, uso de las plataformas TIC, opinión y experiencia con dispositivos electrónicos y adopción de buenas prácticas con la diabetes. La aceptación y eficacia de los criterios de evaluación se aplicaron para valorar el funcionamiento del marco tecnológico. El principal objetivo era la valoración de la eficacia del sistema en lo referente a la mejora de la adherencia. En las pruebas participaron 54 pacientes. 26 fueron asignados al grupo de intervención y equipados con tecnología móvil donde estaba instalado el EBF: 14 pacientes tenían T1DM y 12 tenían T2DM. El grupo de control estaba compuesto por 25 pa cientes que fueron tratados con atención estándar, sin el empleo del EBF. La intervención profesional tanto de los grupos de control como de intervención corrió a cargo de 24 cuidadores, entre los que incluían diabetólogos, nutricionistas y enfermeras. Para evaluar la aceptabilidad del sistema y analizar la satisfacción de los usuarios, a través de LimeSurvey, se creó una encuesta multilingüe tanto para los pacientes como para los profesionales. Los resultados también se recopilaron de los archivos de registro generados en los PMD, el panel médico profesional y las entradas de la base de datos. Los mensajes enviados hacia y desde el EBF y los archivos de registro del sistema y los servicios de comunicación se grabaron durante las cinco semanas del estudio. Se entregaron un total de 2795 mensajes, lo que supuso una media de 107,50 mensajes por paciente. Como se muestra, los mensajes disminuyen con el tiempo, indicando una mejora global de la adherencia al plan de tratamiento. Como se esperaba, los pacientes con T1DM recibieron más consejos a corto plazo, en relación a su estado. Del mismo modo, al ser el centro de T2DM en cambios de estilo de vida sostenible a largo plazo, los pacientes con T2DM recibieron más consejos de recomendación, en cuanto a dietas y actividad física. También se ha llevado a cabo una comparación de la adherencia e índices de uso para pacientes con T1DM y T2DM, entre la primera y la segunda mitad de la prueba. Se han observado resultados favorables para el uso. En lo relativo a la adherencia, los resultados denotaron una mejora general en cada dimensión del plan de tratamiento, como la nutrición y las mediciones de inserción de glucosa en la sangre. Se han llevado a cabo más estudios acerca del cambio a nivel educativo antes y después de la prueba, medidos tanto para grupos de control como de intervención. Los resultados indicaron que el grupo de intervención había mejorado su nivel de conocimientos mientras que el grupo de control mostró una leve disminución. El análisis de correlación entre el nivel de adherencia y las AFM ha mostrado una mejora en la adherencia de uso para los pacientes que recibieron los mensajes de tipo alertas, y unos resultados no significativos aunque positivos relacionados con la adherencia tanto al tratamiento que al uso correlacionado con los recordatorios. Por otra parte, los AFM parecían ayudar a los pacientes que no tomaban suficientemente en serio su tratamiento en el principio y que sí estaban dispuestos a responder a los mensajes recibidos. Aun así, los pacientes que recibieron demasiadas advertencias, comenzaron a considerar el envío de mensajes un poco estresante. El trabajo de investigación llevado a cabo al desarrollar este proyecto ofrece respuestas a las cuatro hipótesis de investigación que fueron la motivación para el trabajo. • Hipótesis 1 : es posible definir una serie de criterios para medir la adherencia en pacientes diabéticos. • Hipótesis 2: es posible diseñar un marco tecnológico basado en los criterios y teorías de cambio de conducta mencionados con anterioridad para hacer que los pacientes diabéticos se comprometan a controlar su enfermedad y adherirse a planes de atención. • Hipótesis 3: es posible poner en marcha el marco tecnológico en el sector de la salud móvil. • Hipótesis 4: es posible utilizar el marco tecnológico como solución de salud móvil en un contexto real y tener efectos positivos en lo referente a indicadores de control de diabetes. La verificación de cada hipótesis permite ofrecer respuesta a la hipótesis principal: La hipótesis principal es: es posible mejorar la adherencia diabética a través de un marco tecnológico mHealth basado en teorías de cambio de conducta. El trabajo llevado a cabo para responder estas preguntas se explica en este trabajo de investigación. El marco fue desarrollado y puesto en práctica en el Proyecto METABO. METABO es un Proyecto I+D, cofinanciado por la Comisión Europea (METABO 2008) que integra infraestructura móvil para ayudar al control, gestión y tratamiento de los pacientes con diabetes mellitus de tipo 1 (T1DM) y los que padecen diabetes mellitus de tipo 2 (T2DM). ABSTRACT Worldwide there is an exponential growth in the incidence of Chronic Diseases (CDs), such as: hypertension, cardiovascular and respiratory diseases, as well as diabetes mellitus, leading to rising numbers of deaths worldwide (Beaglehole et al. 2008). In particular, the prevalence of diabetes mellitus (DM) is largely increasing among all ages and constitutes a major worldwide health problem. Diabetes was directly responsible for 1,5 million deaths in 2012 and 89 million Disability-adjusted life year (DALYs) (WHO 2014). One of the key dilemmas often associated to CD management is the patients’ adherence to treatments, representing a multi-factorial aspect that requires support in terms of: education, self-management, interaction between patients and caregivers, and patients’ engagement. Measuring adherence is complex and, even if widely discussed, there are still no “gold” standards ((Giardini et al. 2015), (Costa et al. 2015). Patient’s engagement, through participation, collaboration, negotiation, and sometimes compromise, enhance opportunities for optimal therapy in which patients take responsibility for their part of the adherence equation. Engaging and involving diabetic patients in treatment decisions, along with professional expertise, can help foster a patient-centered approach to diabetes care (Martin et al. 2005). Patients’ motivation and empowerment are perhaps the two most relevant intervening factors that directly affect self-management of diabetes care. It has been demonstrated that these two factors play an essential role in prescription adherence, as well as for the successful encouragement of a healthy life-style and other behavioural changes (Heneghan et al. 2013). A personalised education plan is indispensable in order to provide the patient with the appropriate tools needed for the effective self-management of the disease (El-Gayar et al. 2013). Effective communication is at the core of providing patient-centred care since it influences behaviours and attitudes towards a health problem (Frampton et al. 2008). In this regard, interactivity, frequency, timing, and tailoring of text messages may promote adherence to a medication regimen. As a consequence, tailoring text messages to patients can constitute a way of making suggestions and information more relevant and effective (Nundy et al. 2013). In this context, mobile health technologies (mHealth) are playing significant roles in improving adherence to prescribed medications (Krishna et al. 2009). The tailoring of diabetes-specific text messages remains an area of opportunity to improve medication adherence and provide motivation to adults with diabetes but further research is needed to fully understand their effectiveness. Personalized text advices have proven to produce a positive impact on patients’ empowerment, self-management, and adherence to prescriptions (Gatwood et al. 2014). mHealth can be used for offering self-management support programs to diabetes patients and at the same time surmounting the technical and financial difficulties involved in diabetes treatment (Free et al. 2013). The main objective of this research work is to demonstrate that a technological framework, based on behavioural change theories, applied to mHealth domain, allows improving adherence treatment in diabetic patients. The framework, named Engagement Behavioural Feedback Framework (EBF), is built on top of validated behavioural techniques to frame messages, guide the definition of contents and assess outcomes: elements from the Transtheoretical Model (TTM), the Goal-Setting Theory (GST), Effective Health Communication (EHC) guidelines and Principles of Persuasive Technology (PPT) were incorporated. The TTM helps patients to progress to a next behavioural stage, through specific motivated text messages, and allow clinician’s identifying the current stage and tailor its strategies individually. Moreover, TTM guidelines are adopted to set customised goals at a level appropriate to the patient’s stage of change. The GST was used to build rules to be applied for enhancing educational intervention and weight loss objectives. Finally, the EHC guidelines and the PPT were applied to increase the effectiveness of messages. The EBF aims to support patients on improving their prescription adherence and persuade them towards a general improvement in diabetes self-management, by means of personalised text messages, named Automatic Feedback Messages (AFM). After a first profile screening, consisting in identifying meaningful patient characteristics based on treatment needs, attitudes and health care behaviours, customised AFMs are selected by the system, approved by the professional, and finally transferred into the patient interface. During the treatment, the user collects the data into a Patient Monitoring Device (PMD) from a set of medical devices and from manual inputs. Inputs consist in medication intake, diet and physical activity, metabolic measurement monitoring and learning tasks. Patient general engagement is checked by estimating the usage of the system and the adherence of treatment and patient goals status in the short and the long term period. The Behavioural Analysis Module, consisting in a set of rules and equations, calculates the patient’s behaviour. After behavioural analysis is accomplished, the AFM library and the dispatch setting are updated by the AFM Manager module. Updates include the number, the type and the frequency of messages. The AFMs are periodically supervised by the professional who also participates to the refinement of the treatment, adapted to the current transtheoretical stage. The AFMs are segmented in different categories and levels and patients can adjust message delivery in accordance with their personal needs. The EBF was integrated to the METABO system, designed to facilitate diabetic patients in managing their disease in a less intrusive approach. Patient device corresponds in a mobile platform, while a medical panel interface allows professionals to monitoring the treatment evolution. Specific tools allow professional to check patient adherence and to update the AFMs dispatch management. The EBF was tested in a randomised controlled pilot. The main objective was to examine the feasibility and acceptance of the system. Secondary objectives were also the assessment of the effectiveness of system in terms of adherence improvement, glycaemic control, and quality of life. Participants were recruited from four different clinical centres in Europe. The baseline assessment included demographics, diabetes status, profile information, knowledge about diabetes in general, usage of ICT platforms, opinion and experience about electronic devices and adoption of good practices with diabetes. Acceptance and the effectiveness evaluation criteria were applied to evaluate the performance of the technological framework. The main objective was the assessment of the effectiveness of system in terms of adherence improvement. Fifty-four patients participated on the trials. Twenty-six patients were assigned in the intervention group and equipped with mobile where the EBF was installed: 14 patients were T1DM and 12 were T2DM. The control group was composed of 25 patients that were treated through a standard care, without the usage of the EBF. Professional’s intervention for both intervention and control groups was carried out by 24 care providers, including endocrinologists, nutritionists, and nurses. In order to evaluate the system acceptability and analyse the users’ satisfaction, an online multi-language survey, using LimeSurvey, was produced for both patients and professionals. Results were also collected from the log-files generated in the PMDs, the professional medical panel and the entries of the data base. The messages sent to and from the EBF and the log-files of the system and communication services were recorded over 5 weeks of the study. A total of 2795 messages were submitted, representing an average of 107,50 messages per patient. As demonstrated, messages decrease over time indicating an overall improvement of the care plan’s adherence. As expected, T1DM patients were more loaded with short-term advices, in accordance with their condition. Similarly, being the focus of T2DM on long-term sustainable lifestyle changes, T2DM received more reminders advices, as for diet and physical activity. Favourable outcomes were observed for treatment and usage adherences of the intervention group: for both the adherence indices, results denoted a general improvement on each care plan’s dimension, such as on nutrition and blood glucose input measurements. Further studies were conducted on the change on educational level before and after the trial, measured for both control and intervention groups. The outcomes indicated the intervention group has improved its level of knowledge, while the control group denoted a low decrease. The correlation analysis between the level of adherences and the AFMs showed an improvement in usage adherence for patients who received warnings message, while non-significantly yet even positive indicators related to both treatment and usage adherence correlated with the Reminders. Moreover, the AFMs seemed to help those patients who did not take their treatment seriously enough in the beginning and who were willing to respond to the messages they received. Even though, patients who received too many Warnings, started to consider the message dispatch to be a bit stressful. The research work carried out in developing this research work provides responses to the four research hypothesis that were the motivation for the work: •Hypothesis 1: It is possible to define a set of criteria to measure adherence in diabetic patients. •Hypothesis 2: It is possible to design a technological framework, based on the aforementioned criteria and behavioural change theories, to engage diabetic patients in managing their disease and adhere to care plans. •Hypothesis 3: It is possible to implement the technological framework in the mobile health domain. •Hypothesis 4: It is possible to use the technological framework as a mobile health solution in a real context and have positive effects in terms of diabetes management indicators. The verification of each hypothesis allowed us to provide a response to the main hypothesis: The Main Hypothesis is: It is possible to improve diabetic adherence through a mHealth technological framework based on behavioural change theories. The work carried out to answer these questions is explained in this research work. The framework was developed and applied in the METABO project. METABO is an R&D project, co-funded by the European Commission (METABO 2008) that integrates mobile infrastructure for supporting the monitoring, management, and treatment of type 1 diabetes mellitus (T1DM) and type 2 diabetes mellitus (T2DM) patients.

Analysis and optimization of trajectories for Ballistic Missiles Interception

Intercontinental Ballistic Missiles are capable of placing a nuclear warhead at more than 5,000 km away from its launching base. With the lethal power of a nuclear warhead a whole city could be wiped out by a single weapon causing millions of deaths. This means that the threat posed to any country from a single ICBM captured by a terrorist group or launched by a 'rogue' state is huge. This threat is increasing as more countries are achieving nuclear and advanced launcher capabilities. In order to suppress or at least reduce this threat the United States created the National Missile Defense System which involved, among other systems, the development of long-range interceptors whose aim is to destroy incoming ballistic missiles in their midcourse phase. The Ballistic Missile Defense is a high-profile topic that has been the focus of political controversy lately when the U.S. decided to expand the Ballistic Missile system to Europe, with the opposition of Russia. However the technical characteristics of this system are mostly unknown by the general public. The Interception of an ICBM using a long range Interceptor Missile as intended within the Ground-Based Missile Defense System by the American National Missile Defense (NMD) implies a series of problems of incredible complexity: - The incoming missile has to be detected almost immediately after launch. - The incoming missile has to be tracked along its trajectory with a great accuracy. - The Interceptor Missile has to implement a fast and accurate guidance algorithm in order to reach the incoming missile as soon as possible. - The Kinetic Kill Vehicle deployed by the interceptor boost vehicle has to be able to detect the reentry vehicle once it has been deployed by ICBM, when it offers a very low infrared signature, in order to perform a final rendezvous manoeuvre. - The Kinetic Kill Vehicle has to be able to discriminate the reentry vehicle from the surrounding debris and decoys. - The Kinetic Kill Vehicle has to be able to implement an accurate guidance algorithm in order to perform a kinetic interception (direct collision) of the reentry vehicle, at relative speeds of more than 10 km/s. All these problems are being dealt simultaneously by the Ground-Based Missile Defense System that is developing very complex and expensive sensors, communications and control centers and long-range interceptors (Ground-Based Interceptor Missile) including a Kinetic Kill Vehicle. Among all the technical challenges involved in this interception scenario, this thesis focuses on the algorithms required for the guidance of the Interceptor Missile and the Kinetic Kill Vehicle in order to perform the direct collision with the ICBM. The involved guidance algorithms are deeply analysed in this thesis in part III where conventional guidance strategies are reviewed and optimal guidance algorithms are developed for this interception problem. The generation of a realistic simulation of the interception scenario between an ICBM and a Ground Based Interceptor designed to destroy it was considered as necessary in order to be able to compare different guidance strategies with meaningful results. As a consequence, a highly representative simulator for an ICBM and a Kill Vehicle has been implemented, as detailed in part II, and the generation of these simulators has also become one of the purposes of this thesis. In summary, the main purposes of this thesis are: - To develop a highly representative simulator of an interception scenario between an ICBM and a Kill Vehicle launched from a Ground Based Interceptor. -To analyse the main existing guidance algorithms both for the ascent phase and the terminal phase of the missiles. Novel conclusions of these analyses are obtained. - To develop original optimal guidance algorithms for the interception problem. - To compare the results obtained using the different guidance strategies, assess the behaviour of the optimal guidance algorithms, and analyse the feasibility of the Ballistic Missile Defense system in terms of guidance (part IV). As a secondary objective, a general overview of the state of the art in terms of ballistic missiles and anti-ballistic missile defence is provided (part I).

Proyecto y lugar en la arquitectura doméstica de Jørn Utzon

En medio de un bosque danés, de altos arboles que se mueven al fuerte viento nórdico bajo el débil sol de las latitudes altas, y cargado de unos cuantos tableros de madera que consiguió de una exposición ya terminada, realizó Utzon su maqueta a escala real de su primera casa familiar en Hellebæk (1950-52) a la edad de treinta y dos años. De la misma manera que el pintor William Turner necesitó atarse a lo alto de un mástil de un barco, para vivir en directo una de las muchas tormentas que tantas y tantas veces había pintado en sus cuadros, el joven Utzon consideró indispensable introducirse dentro de la maqueta de su propia casa antes de construirla, para valorar in situ las potencialidades de aquel proyecto en relación al lugar. La obra de Jørn Utzon (1918-2008) es una arquitectura expectante y atenta del lugar donde se ubica. Jørn Utzon es un arquitecto de origen nórdico, que descubre su verdadera idiosincrasia en la cultura mediterránea, cultura en la que reside durante casi la mitad de toda su vida. Esta tesis se ha centrado en analizar exhaustivamente la relación de su arquitectura doméstica con el lugar donde se halla. Aspecto tan citado en la bibliografía existente de su obra, aunque nunca desarrollado de manera exhaustiva. El objetivo del análisis ha sido intentar encontrar invariantes o patrones que pudieran subyacer en su obra residencial en relación a ese tema. Para dicho análisis, se ha tomado una muestra suficientemente amplia de veinte viviendas o conjuntos residenciales (entre ellas sus cuatro viviendas familiares proyectadas), repartidas por cinco países (Suecia, Dinamarca, Reino Unido, España y Nueva Gales del Sur), que constituyen la tercera parte de su obra doméstica y la mitad de su obra construida residencial, así como las citas explícitas del autor sobre este tema en su obra escrita, y los planos o croquis de su obra gráfica. Como metodología de trabajo se ha recurrido a la consulta de las fuentes primarias: viajando y conociendo in-situ las casas seleccionadas en Dinamarca, Suecia, España y Australia; viviendo un mes en una de las casas (Can Lis) gracias a una beca del Gobierno danés y la Utzon Foundation; y realizando entrevistas a las personas que más cerca estuvieron del arquitecto en su entorno familiar y profesional. Asimismo, también se ha publicado parte de su contenido en medios internacionales: 4th International Utzon Symposium (7/3/2013-9/3/2014) y la página web oficial de Can Lis dependiente de la Utzon Foundation (www.canlis.dk). Las doce invariantes encontradas en relación al proyecto y lugar en los proyectos seleccionados, han sido agrupadas en torno a tres grandes elementos sobre los que Utzon constantemente reflexiona en sus escritos propios: horizonte, sol y material autóctono. Elementos que tienen su origen en la influencia que la navegación tuvo en su vida, y en su carácter espiritual y austero en lo material. La historia de Utzon es la de un nórdico, de vocación navegante, que encuentra su lugar en la cultura mediterránea, rodeado entre piedras de Marés, mientras divisa en silencio el horizonte marino en el umbral entre luz y sombra. ABSTRACT In the middle of a Danish forest, with high trees which move with the Nordic wind under the weak sun of high latitudes, and with the help of some wooden canvases acquired from an already completed exhibition, Jørn Utzon built a real-scale model of his first family house in Hellebæk (1950-52) at the age of thirty-two. In the same way that William Turner needed to be tied up on the top of a boat flagpole in order to have a first-hand experience of one of the many storms that he had depicted in his paintings so many times before, the young Utzon thought it was crucial to go into the model of his own house before building it, to evaluate in situ the potential of that project in relation to the place. Utzon’s work is architecture interested in and attentive of the place where it is situated. Jørn Utzon (1918-2008) is an architect of Nordic origin who discovered his own idiosyncrasy in the Mediterranean culture, in which he resided for half of his live. This thesis has focused on an exhaustive analysis of the relation between his domestic architecture and the place where it is located. This issue has been often cited in the existing bibliography, although it has never been exhaustively developed. The analysis objective has been to attempt to find invariants and patterns that could exist in his domestic work in relation to this subject. For this analysis, a sufficiently large sample has been selected: twenty houses or housing complexes (among others his own four family houses), distributed in five countries (Sweden, Denmark, United Kingdom, Spain and New South Wales), which constitute the third part of his domestic work, and half of his residential constructed projects, as well as Utzon’s written texts about this theme, and the drawings and sketches of his graphic work. The methodology used was based on consultation of primary sources: travelling and examining in situ the selected houses in Denmark, Sweden, Spain and Australia; living for a month in one of the houses (Can Lis) thanks to a research grant from the Danish Government and the Utzon Foundation; and interviewing people from his closest family and professional circles. Furthermore, part of the thesis has been published in international media: 4th International Utzon Symposium (7/3/2013-9/3/2014) and on the official web site of Can Lis, an Utzon Foundation subsidiary(www.canlis.dk). The twelve invariants discovered in relation to the project and the location of the selected projects, have been grouped according to three elements which Utzon continuously reflects upon in his own writings: the horizon, the sun and autochthonous material. Elements which originate from the influence that navigation had in his life, and from his spiritual and austere character. The story of Utzon is that of a Nordic person, with the vocation of a navigator, who found his place in the Mediterranean culture, surrounded with Marés stones, while silently making out the sea horizon on the threshold between light and shadow.

Trans arquitectura : imaginación, invención e individuación del objeto técnico arquitectónico : transferencia tecnológica desde la industria del transporte al proyecto arquitectónico (1900-1973)

Se presenta la tesis doctoral, titulada ‘TRANS Arquitectura. Imaginación, Invención e individuación del objeto tecnico arquitectónico. Transferencia tecnológica desde la Industria del Transporte al Proyecto de Arquitectura [1900-1973]'’, que aborda la relación entre la Arquitectura y el Objeto Técnico durante la Modernidad.1 La temática de la tesis gravita en torno a la cultura técnica, la cultura material y la historia de la Tecnología del siglo XX. Hipótesis Se sostiene aquí la existencia de unas arquitecturas que se definen como Objetos Técnicos. Para demostrarlo se estudia si éstas comparten las mismas propiedades ontológicas de los objetos técnicos. Industria y Arquitectura La historia de la Arquitectura Moderna es la historia de la Industria Moderna y sus instalaciones industriales, sus productos y artefactos o sus procedimientos y procesos productivos. Fábricas, talleres, acerías, astilleros, minas, refinerías, laboratorios, automóviles, veleros, aviones, dirigibles, transbordadores, estaciones espaciales, electrodomésticos, ordenadores personales, teléfonos móviles, motores, baterías, turbinas, aparejos, cascos, chassis, carrocerías, fuselajes, composites, materiales sintéticos, la cadena de montaje, la fabricación modular, la cadena de suministros, la ingeniería de procesos, la obsolescencia programada… Todos estos objetos técnicos evolucionan constantemente gracias al inconformismo de la imaginación humana, y como intermediarios que son, cambian nuestra manera de relacionarnos con el mundo. La Arquitectura, al igual que otros objetos técnicos, media entre el hombre y el mundo. Con el objetivo de reducir el ámbito tan vasto de la investigación, éste se ha filtrado a partir de varios parámetros y cualidades de la Industria, estableciendo un marco temporal, vinculado con un determinado modo de hacer, basado en la ciencia. El inicio del desarrollo industrial basado en el conocimiento científico se da desde la Segunda Revolución Industrial, por consenso en el último tercio del siglo XIX. Este marco centra el foco de la tesis en el proceso de industrialización experimentado por la Arquitectura desde entonces, y durante aproximadamente un siglo, recorriendo la Modernidad durante los 75 primeros años del siglo XX. Durante este tiempo, los arquitectos han realizado transferencias de imágenes, técnicas, procesos y materiales desde la Industria, que ha servido como fuente de conocimiento para la Arquitectura, y ha evolucionado como disciplina. Para poder abordar más razonablemente un periodo tan amplio, se ha elegido el sector industrial del transporte, que históricamente ha sido, no sólo fuente de inspiración para los Arquitectos, sino también fuente de transferencia tecnológica para la Arquitectura. Conjuntos técnicos como los astilleros, fábricas de automóviles o hangares de aviones, individuos técnicos como barcos, coches o aviones, y elementos técnicos como las estructuras que les dan forma y soporte, son todos ellos objetos técnicos que comparten propiedades con las arquitecturas que aquí se presentan. La puesta en marcha de la cadena móvil de montaje en 1913, se toma instrumentalmente como primer foco temporal desde el que relatar la evolución de numerosos objetos técnicos en la Primera Era de la Máquina; un segundo foco se sitúa en 19582, año de la creación de la Agencia Espacial norteamericana (NASA), que sirve de referencia para situar la Segunda Era de la Máquina. La mayoría de los objetos técnicos arquitectónicos utilizados para probar la hipótesis planteada, gravitan en torno a estas fechas, con un rango de más menos 25 años, con una clara intención de sincronizar el tiempo de la acción y el tiempo del pensamiento. Arquitectura y objeto técnico Los objetos técnicos han estado siempre relacionados con la Arquitectura. En el pasado, el mismo técnico que proyectaba y supervisaba una estructura, se ocupaba de inventar los ingenios y máquinas para llevarlas a cabo. Los maestros de obra, eran verdaderos ‘agentes de transferencia tecnológica’ de la Industria y su conocimiento relacionaba técnicas de fabricación de diferentes objetos técnicos. Brunelleschi inventó varia grúas para construir la cúpula de Santa Maria dei Fiori (ca.1461), seguramente inspirado por la reedición del tratado de Vitruvio, De Architectura (15 A.C.), cuyo último capítulo estaba dedicado a las máquinas de la arquitectura clásica romana, y citaba a inventores como Archimedes. El arquitecto florentino fue el primero en patentar un invento en 1421: una embarcación anfibia que serviría para transportar mármol de Carrara por el río Arno, para su obra en Florencia. J. Paxton. Crystal Palace. London 1851. Viga-columna. Robert McCormick. Cosechadora 1831. 2ª patente, 1845. La Segunda Revolución Industrial nos dejó un primitivo ejemplo moderno de la relación entre la Arquitectura y el objeto técnico. El mayor edificio industrializado hasta la fecha, el Crystal Palace de Londres, obra de Joseph Paxton, fue montado en Londres con motivo de la Gran Exposición sobre la Industria Mundial de 1851, y siempre estará asociado a la cosechadora McCormick, merecedora del Gran Premio del Jurado. De ambos objetos técnicos, podrían destacarse características similares, como su origen industrial, y ser el complejo resultado de un ensamblaje simple de elementos técnicos. Desde la entonces, el desarrollo tecnológico ha experimentado una aceleración continuada, dando lugar a una creciente especialización y separación del conocimiento sobre las técnicas antes naturalmente unidas. Este proceso se ha dado a expensas del conocimiento integrador y en detrimento de la promiscuidad entre la Industria y la Arquitectura. Este es, sin lugar a dudas, un signo consustancial a nuestro tiempo, que provoca un natural interés de los arquitectos y otros tecnólogos, por las transferencias, trans e inter-disciplinareidades que tratan de re-establecer los canales de relación entre los diferentes campos del conocimiento. La emergencia de objetos técnicos como los vehículos modernos a principios del siglo XX (el automóvil, el trasatlántico, el dirigible o el aeroplano) está relacionada directamente con la Arquitectura de la Primera Era de la Máquina. La fascinación de los arquitectos modernos por aquellas nuevas estructuras habitables, se ha mantenido durante más de un siglo, con diferente intensidad y prestando atención a unos objetos técnicos u otros, oscilando entre el dominio del valor simbólico de los vehículos como objetosimágenes, durante el periodo heroico de la Primera Era de la Máquina, y la mirada más inquisitiva durante la Segunda, que perseguía un conocimiento más profundo de la organización de los mismos y del sistema técnico en el que estaban incluidos. La relación homóloga que existe entre arquitecturas y vehículos, por su condición de estructuras habitables, es algo de sobra conocido desde que Le Corbusier utilizara aquellas imágenes de barcos, coches y aviones para ilustrar su manifiesto Vers une architecture, de 1923. Los vehículos modernos han sido los medios con los que transmitir los conceptos que ansiaban transformar las propiedades tradicionales de la Arquitectura, relativas a su factura, su habitabilidad, su duración, su funcionalidad o su estética. Destaca particularmente el caso del automóvil en las décadas de los años 30 y 50, y los vehículos del programa espacial en las décadas de los 60 y 70. El conocimiento y la documentación previa de estos hechos, fueron un buen indicio para identificar y confirmar que el sector industrial del transporte, era un especialmente trascendente y fértil proveedor de casos de transferencia tecnológica para la Arquitectura. La tradición Moderna inaugurada por Le Corbusier en los años 20, ha sido mantenida y defendida por una multitud de arquitectos modernos como Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames o Craig Ellwood, cuyo trabajo, animado por el legado de anteriores tecnólogos como Bucky Fuller o Jean Prouvé, fue fundamental y referencia obligada para la siguiente generación de arquitectos como Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean Kaplicky o Richard Horden, entre otros. Todos ellos han contribuido a engrosar el imaginario del objeto técnico, aportando sus obras arquitectónicas. Estos arquitectos que aparecen repetidamente en el discurrir de la tesis, pertenecen a un mismo linaje, y son agrupados según una estructura ‘genealógica’, que se ha denominado ‘Estirpe Técnica’. Unidos por intereses comunes y similares enfoques o actitudes ante el proyecto de arquitectura, entendida como objeto Técnico, han operado mediante la práctica de la transferencia tecnológica, sin limitarse a las técnicas compositivas propias de la disciplina arquitectónica. Durante la investigación, se ha recopilado una selección de menciones explícitas -hechas por arquitectos- sobre otros objetos técnicos para referirse a la Arquitectura, mostrando las constantes y las variaciones de sus intereses a lo largo del siglo, lo que nos ha llevado a conclusiones como por ejemplo, que los conjuntos técnicos (fábricas de zepelines, aviones, automóviles o trasatlánticos) eran tomados por los arquitectos de la primera Modernidad, como un modelo imaginario, formal y compositivo, mientras que los de la Segunda Era de la Máquina los tomaban como modelo espacial y organizativo para la arquitectura. La mencionada estirpe de tecnólogos incluye líneas de descendencia conocidas, como: EiffelSuchovBehrens GropiusMiesLeCorbusierLodsProuve, en la Europa continental, o una rama británica como: LoudonPaxtonWilliamsStirlingGowan SmithsonsPriceArchigramFosterRogersPiano KaplickyHorden. También podemos encontrar conexiones intercontinentales como Fuller EamesRudolphFosterRogers, o ramificaciones menos previsibles como: LeRicolaisKahn PianoKaplicky, o LeCorbusierFreyLacaton Vassal… Seguramente muchos más merecerían incluirse en esta lista, y de hecho, la tesis asume la imposibilidad de incluirlo todo (por motivos prácticos) aunque contempla la posibilidad de ser ampliada en un futuro. Con lo aquí incluido, se pretende mostrar la continuidad en los enfoques, planteamientos y técnicas de proyectos aplicadas, de los que podemos deducir algunas conclusiones, como por ejemplo, que en los periodos inmediatamente posteriores a las dos Guerras Mundiales, aumentó la intensidad de aportaciones de nuevas imágenes de vehículos, al imaginario del objeto técnico utilizado por los arquitectos, a través de publicaciones y exposiciones. Hoy, cien años después de que Ford pusiera en marcha la cadena móvil de montaje, aún encontramos viva esta tradición en las palabras de un arquitecto, Richard Horden, cuyo trabajo porta consigo –como la información embebida en los elementos técnicos- toda una cultura técnica de una tradición moderna. Horden representa uno de los exponentes de la que he denominado estirpe de tecnólogos. Es por ello que he querido concluir la tesis con una entrevista, realizada en Mayo de 2015, en su estudio de Berkeley Square en Londres (ver Apéndices). Guías Para el desarrollo de la presente tesis, se ha tomado, como principal obra de referencia, otra tesis, titulada El modo de existencia de los objetos técnicos, leída y publicada en 1958 por el filósofo francés Gilbert Simondon [1924-89], dedicada a la ontología del objeto técnico. Esta obra enmarca el enfoque intelectual de la tesis, que entronca con la fenomenología, para movilizar una visión particular de la Arquitectura, a la que sirve como modelo de análisis ontológico para estudiar sus procesos de génesis, invención e individuación. Para el desarrollo de éstos, se ha utilizado como complemento bibliográfico, otra obra del mismo autor, titulada Imaginación e invención 1965-66. En cuanto a las fuentes historiográficas disciplinares, se ha elegido utilizar a Reyner P. Banham [1922-1988] y a Martin E. Pawley [1938-2008] como guías a través de la arquitectura del siglo XX. Sus crónicas sobre la Primera y Segunda Era de la Máquina3 y su obra crítica, han servido como índices desde los que reconstruir el imaginario del objeto técnico moderno, y del que aprovisionarse de proyectos y obras de Arquitectura como casos de estudio para la tesis. Estas obras han servido además como índices de otra bibliografía, que ha sido complementaria a la de éstos. Objetivos de la Tesis El principal objetivo de la tesis es demostrar la hipótesis: si una obra de arquitectura puede ser considerada un objeto técnico y bajo qué condiciones, construyendo un criterio que permita reconocer cuándo una obra de Arquitectura responde a la definición de objeto técnico. Otro objetivo es demostrar la importancia y potencia de la Transferencia tecnológica en el proceso evolutivo de la Arquitectura, y para ello se presentan ejemplos de una metodología de proyecto por ensamblaje, que Martin Pawley denominaba ‘Design by Assembly’. También es un objetivo el de reconstruir un Atlas del Imaginario del objeto técnico moderno, con el fin de conocer mejor las causas, razones y finalidades que llevaron a los arquitectos modernos a perseguir una arquitectura como objeto técnico. Este Atlas permite relacionar panópticamente los distintos objetos técnicos entre sí, revelando la verdadera importancia y trascendencia de aquéllos y las arquitecturas con las que se relacionan. En él, las arquitecturas vuelven a situarse en el contexto más extenso y complejo de la industria y la historia de la tecnología, al que siempre pertenecieron. De este modo, éstas son capaces de desvelar todo el conocimiento -en forma de información- que portan en su propio código ‘genético’, desplegando capítulos completos de cultura tecnológica, tan antigua como la Humanidad y en constante y creciente evolución. Estructura de la tesis Tras una Introducción en la que se presentan algunos de los conceptos principales que se instrumentalizan en la tesis sobre la ontología Simondoniana del objeto técnico y sobre la transferencia tecnológica aplicada al proyecto de Arquitectura, el texto principal de la tesis consta de tres partes: La primera se dedica a la Imaginación, una segunda parte a la Invención y una tercera a Individuación o evolución del objeto técnico. Se termina con una Discusión de la tesis y un apartado de Conclusiones. En la Introducción al objeto técnico, éste se define ontológicamente y se distinguen sus diferentes categorías (conjuntos técnicos, individuos técnicos y elementos técnicos). Se explica el proceso de génesis del objeto técnico y sus fases de imaginación, invención e individuación. También se presentan los conceptos de transducción, tecnicidad y sistema técnico, fundamentales para entender el concepto de transferencia tecnológica que se desarrollará después. La concretización, explica el modo particular de individuación y evolución de los objetos técnicos, un proceso por el que las diferentes partes de un objeto técnico, se integran y tienden hacia la propia convergencia. Aquí se comprueba la efectividad del concepto simondoniano de Transducción, como señal o información transmitida y transformada, y se relaciona con la Transferencia Tecnológica - un proceso sinergético, por el que un sector industrial se beneficia del desarrollo de otro sector- a la que se han referido explícitamente arquitectos e historiadores para explicar sus obras, durante la Segunda Era de la Máquina, y que es determinante para el desarrollo de la Industria. La transferencia tecnológica sería la transmisión del conjunto de conocimientos sobre la técnica, que incluyen su esfera fáctica, pero también la esfera sensible de la experiencia. En su aplicación a la arquitectura, las transferencias se han clasificado según tres tipos: Eidéticas, Tectónicas, Orgánicas. En la primera parte dedicada a la Imaginación del objeto técnico arquitectónico se realiza una reconstrucción ‘arqueológica’ –y parcial- del imaginario del objeto técnico moderno, con la intención de conocer mejor su génesis y la relación con otros objetos técnicos. Las fuentes de ese imaginario se buscan en las instalaciones de la Industria de principios de siglo XX, en particular en las fábricas de vehículos, con la finalidad de comprobar hasta qué punto, esos objetos técnicos fueron importantes para imaginar la Arquitectura moderna. La reconstrucción se continúa hasta la Segunda Era de la Máquina, cuando una nueva mirada más inquisitiva y precisa, se dirige a otras fábricas, vehículos y componentes, interesándose por sus cualidades materiales y organizativas. Transferencias Eidéticas, que operan desde un conocimiento intuitivo y son útiles para transmitir información sobre la esencia de un objeto técnico que sirve de fuente. Conceptos abstractos se transmiten por medio de las imágenes—objeto, para producir una transformación en su equivalente arquitectónico. Fruto de la investigación, se han detectado un grupo de conceptos que han sido objeto de transferencias tecnológicas de naturaleza eidética, provenientes del imaginario del objeto técnico moderno: FABRICADO, HABITABLE, FUNCIONAL, EFICIENTE, OBSOLESCENTE y BELLO. En la segunda parte dedicada a la Invención del objeto técnico arquitectónico, las transferencias también pueden ser Tectónicas, cuando lo que se transmite es una técnica constructiva o estructural aplicada mediante MATERIALES artificiales (como los metales, los composites como el ferrocemento, y el plywood, o las aleaciones como el aluminio) o mediante el ensamblaje de ESTRUCTURAS o partes componentes de otro objeto técnico, (como cascos, fuselajes, carrocerías o aparejos) y tiene como resultado la invención de un nuevo objeto técnico arquitectónico. En la tercera parte dedicada a la individuación, se abordan las transferencias ORGÁNICAS, lo que se transfiere es una técnica organizativa, aplicada a través de PROCEDIMIENTOS que definen la actividad del arquitecto como tecnólogo e inventor de objetos técnicos. Estos procedimientos tienen un efecto transformador en tres instituciones tradicionales para la Arquitectura: la Escuela, el Estudio y la Obra, y sus resultados se resumen en nuevos modelos de organización de la Educación de la Arquitectura, con la aparición de los Talleres de proyectos; nuevos modelos de organización del ejercicio de arquitecto: la Oficina técnica; nuevos modelos de organización del espacio, basados en la organización espacial de la Industria, que da lugar a patrones o Matrices espaciales; un nuevo modelo de organización del proyecto, que utiliza las herramientas gráficas de la industria y el ensamblaje como metodología; y un nuevo modelo de producción arquitectónica, basado en la Industrialización. Tras explicar los conceptos y la génesis del ensamblaje y el montaje, se presenta el proyecto por ensamblaje (Design by assembly) como un método que promueve la invención arquitectónica. Se demuestra utilizando algunos casos analizados en la tesis, en los que se ha realizado alguna transferencia conceptual, constructiva u organizativa. Tras analizar las arquitecturas estudiadas en la tesis, se ha utilizado el método genético propuesto por Simondon para comprender cada evolución particular, reconstruyendo las líneas genealógicas hasta sus ancestros, e identificando una serie de linajes genéticos, que corresponderían con los conjuntos técnicos estudiados en la tesis: el astillero, la fábrica de coches, y la fábrica de aeronaves: los Ancestros de la Modernidad. Los sistemas de organización espacial de estos conjuntos técnicos, están directamente relacionados con el objeto técnico que se produce en él. A partir de ellos se definen una serie de matrices operativas (MILL, SHOP, SHED), que sirven para hacer una taxonomía del objeto técnico arquitectónico. Esto se ejemplifica con algunos proyectos de Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean Kaplicky y Richard Horden. Tesis: Comprobación de la hipótesis Simondon definía ontológicamente el Objeto técnico como aquello de lo que existe génesis y que desarrolla una tendencia hacia la solidaridad y unidad. Para que una Arquitectura pueda ser reconocida como un Objeto técnico, se deben dar una serie de condiciones, en las sucesivas fases que intervienen en su modo de existencia: Imaginación. Estas arquitecturas remiten a un imaginario protagonizado por imágenes-objeto de otros objetos técnicos (conjuntos técnicos, individuos técnicos y elementos técnicos). Esas imágenes-objeto vehiculizan una transferencia eidética de los objetos técnicos que simbolizan. Invención. Estas arquitecturas son el resultado de transferencias tectónicas, que se producen durante el proceso de proyecto, mediante el ensamblaje de materiales, componentes o procedimientos, utilizados en la industria para la producción de otros objetos técnicos. Individuación. Estas arquitecturas evolucionan y se individualizan por concretización, un proceso por el que los objetos técnicos se organizan para seguir su tendencia hacia la integración de sus partes, con el fin de alcanzar la convergencia de funciones en una única estructura. Esta integración tiende hacia la naturalización del objeto técnico, mediante la inclusión simbiótica de sus medios naturales asociados. En este caso, veremos cómo se ha producido transferencias orgánicas, o lo que es lo mismo, cómo los objetos técnicos –en el nivel de los conjuntos técnicos- se han tomado como modelo de organización por la arquitectura. Tras comprobar que de ellas existe una génesis, que evoluciona por las fases de imaginación e invención y concretización, se analiza su imaginario, su materialidad, sus estructuras y su organización, con el fin de detectar patrones y principios organizativos comunes a otros objetos técnicos. Interés de la tesis Desde el comienzo del nuevo siglo, diversos autores han demostrado un renovado interés por definir qué es el proyecto, qué lo constituye para qué sirve. Las aproximaciones al tema provienen de la filosofía analítica (Galle, 2008) o de la filosofía de la tecnología (Verbeek, 2005; Vermaas, 2009) y a menudo versan sobre la relación entre diseño y la cultura material (Dorschel 2003, Boradkar 2010 o Preston 2012). Es importante indicar el reciente y también creciente interés suscitado por la obra del filósofo francés, Gilbert Simondon [1924-1989], reconocida por su importante contribución a la filosofía de la técnica y la fenomenología, y por la influencia en el pensamiento de filósofos como Gilles Deleuze, autor presente en multitud de tesis doctorales e investigaciones teóricas llevadas a cabo en las principales escuelas de Arquitectura de todo el mundo desde los años 90 hasta el presente. La reedición y traducción de la obra de Simondon (ing. 1980, esp. 2008) ha recibido la atención de filósofos actuales como Paolo Virno, Bruno Latour o Bernard Stiegler, que siguen recurriendo a su estudio y análisis para avanzar en su pensamiento, estando por tanto presente en el debate contemporáneo sobre la técnica. Tras su reciente traducción al español, el pensamiento de Simondon ha despertado un gran interés en América Latina, como demuestra la organización de varios congresos y simposios, así como la proliferación de publicaciones en torno a su obra y pensamiento. Las futuras traducciones del resto de sus principales obras, asegurarán una introducción cada vez mayor en la comunidad académica. Se ha procurado presentar una mirada alternativa de la Historia de la Arquitectura Moderna, utilizando como guía a un cronista como Reyner Banham. La Era de la Máquina se ha cruzado con la Mecanología y el “vitalismo técnico” de Simondon, obteniendo como resultado una interpretación fresca, renovada y optimista de algunas de las más importantes obras de Arquitectura del siglo XX, que seguro contribuirán al desarrollo de la del siglo XXI, inmerso ya en el cambio de paradigma hacia la sostenibilidad y la ecología. ABSTRACT 'TRANS architecture. Imagination, invention and technical individuation of the architectural technical object. Technology transfer from the Transport Industry to Architectural Design [1900- 1973]' is a thesis dealing with the relationship between Architecture and the Technical Object during Modernity5. The theme of the thesis revolves around the technical culture, material culture and the history of twentieth-century technology. Hypothesis Held here is the existence of some architectures defined as technical objects. A study has been developed to prove if those architectures share the ontological properties of a technical object. Industry and Architecture The history of Modern Architecture is also the history of modern industry and its facilities, its products and devices, its procedures and production processes. Factories, workshops, steel mills, shipyards, mines, refineries, laboratories, cars, yachts, airplanes, airships, shuttles, space stations, home appliances, personal computers, mobile phones, motors, batteries, turbines, rigs, hulls, chassis, bodies, fuselages , composites and synthetic materials, the assembly line, modular manufacturing, the supply chain, process engineering, the planned obsolescence ... All these technical objects are constantly evolving thanks to the inconsistency of the human imagination and, as our intermediates, keep changing our way of relating and being in the world. Architecture, alike other technical objects, mediates between man and the World. In order to frame the vast field of the research, it has been filtered according to various parameters and qualities of Industry, establishing also a time frame which is related to a particular science-based way of making. The start of an industrial development, based on scientific knowledge is given from the Second Industrial Revolution -by consensus on the last third of the nineteenth century. This frame puts the focus of the thesis in the process of industrialization experienced by the Architecture of at least one century, and tours through Modernity during the first 75 years of the twenieth century. During this time, architects have made transfers of images, techniques, processes and materials from Industry, serving as a source of knowledge and thus allowing Architecture to evolve as a discipline. To reasonably address the enormous scope of the thesis, the industrial sector of transportation has ben chosen. It is not only a historical source of inspiration for architects, but also a traditional source of technology transfer for Modern Architecture. Technical sets such as shipyards, automobile factories or aircraft hangars, technical individuals as boats, cars or planes, and technical elements like the structures shaping and supporting them, are all technical objects which share properties with the architectures here presented. The launch of the moving assembly line in 1913, is instrumentally taken as a first time focus, from which to describe the evolution of many technical objects in the First Machine Age; a second focus could be found in 19586, year of the creation of the North American Space Agency (NASA), serving as a reference to the Second Machine Age. Most architectural technical objects used to test the hypothesis, gravitate around this second focus, in a range of plus or minus 25 years, with a clear intention to synchronize the time for action and time of thought. Architecture and Technical Object Technical objects have always been related to Architecture. In the past, the same technician who planned and oversaw a building structure, invented the devices and machines to carry them out. The foremen were the true 'technology transfer agents' from Industry. Their knowledge naturally related different manufacturing techniques to make diverse technical objects. Brunelleschi invented various cranes to build the dome of Santa Maria dei Fiori in Florence (ca.1461). Probably inspired by the reedition of Vitruvius’ treaty De Architectura (15 BC), whose last chapter was dedicated to the machines of classical Roman architecture and quoted inventors as Archimedes, the florentine architect was the first to patent an invention in 1421: an amphibious craft serving as a means of transportation for Carrara marble along the Arno river. At the daw of the Second Industrial Revolution, whose development was based on the scientific knowledge, we find a primitive modern example of the relationship between Architecture and a Technical Object: The Crystal Palace, built in London for the Great Exhibition of 1851 World Industry and designed by Joseph Paxton, was the largest to date industrialized building, and it will be always associated with the McCormick Reaper, worthy of the Grand Jury’s Prize. Similar characteristics could be emphasized of both technical objects, such as their industrial origin and for being be the complex result of a simple assembly of technical elements. Since then, technological development has experienced a continued acceleration, resulting in an increasing specialization and separation of knowledge about techniques which were naturally attached in the past. This process has happened at the expense of an integrative knowledge and against promiscuity between Industry and Architecture. This is, undoubtedly, an inherent sign of our time, which causes the natural and interest of architects and other technicians about transfers, trans-disciplinarity and inter-disciplinarity, as a reaction to reestablish channels of relationships between these different fields of knowledge. The emergence of technical objects as modern vehicles in the early twentieth century (the car, the Ocean liner, the airship or the airplane) is directly related to the Architecture of the First Machine Age. Modern architects’ fascination for those new ‘inhabitable’ structures has been maintained for over a century, with different intensity and paying attention to one and other technical objets, ranging from the domain of the symbolic value of the vehicles as objectsimages, during heroic period of the First Machine Age, to the more inquisitive glance characterizing the Second Machine Age, which sought a deeper understanding of the organization of such objects and the technical system to which they belonged. The periods immediately following both World Wars, showed a concentrated effort to bring new images of vehicles to the imaginary of architects, by means of publications and exhibitions. The homologous relationship between architectures and vehicles, in their capacity as living structures, is something well known since Le Corbusier used the images of cars, boats and airplanes to illustrate his manifesto, Towards an architecture in 1923. Modern vehicles have been the means by which to convey the concepts eager to transform the traditional attributes of Architecture: those relating to its manufacture, habitability, duration, functionality or aesthetics. The automobile stands out during the 30s and 50s, and the new vehicles of the Space Program satnd in the 60s and 70s. The prior knowledge and documentation of these events were a good indication to identify the industrial sector of Transportation as one of especial importance and as a fertile provider of technology transfer cases for Architecture. The Modern tradition, inaugurated by Le Corbusier in the 20s, has been maintained and defended by a host of modern architects like Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames and Craig Ellwood, whose work - inspired by the legacy of previous technologists as Bucky Fuller or Jean Prouvé- was fundamental and a mandatory reference for the next generation of architects like Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean and Richard Horden Kaplicky, among others. They have all contributed to increase the imaginary of the technical object, adding to it their architectural works. In the passage of the thesis, we repeatedly find a number of architects, who have been grouped according to a 'genealogical' structure, which has been called 'Technical Lineage'. Gathered by common interests and similar views or attitudes to the architectural design, understood as a technical object, they have operated through the practice of technology transfer, without limiting itself to specific compositional techniques of the architectural discipline. During the investigation, a selection of explicit references made by those architects, about other technical objects referring to their Architecture, has been compiled, showing constants and variations in their interests throughout the century, which has led to conclusions such as, having technicians sets (zeppelins factories, airships factories, car factories and shipyards) been taken by the architects of the first Modernity, as their main formal, compositional and imaginary models, while the Second Machine Age had taken them as a spatial and organizational model for their architecture. The above mentioned lineage of technologists includes weel-known ‘seed lines’ as: Eiffel- Suchov-Behrens, Gropius-Mies-LeCorbusier- Lods-Prouve, in continental Europe; British branches as Loudon-Paxton-Williams-Stirling- Gowan-Smithsons-Price-Archigram-Foster- Rogers-Piano-Kaplicky-Horden. And we could also find intercontinental connections as Fuller- Eames-Rudolph-Foster-Rogers, or other less predictable ramifications as LeRicolais-Kahn Piano-Kaplicky, or LeCorbusier-Frey-Lacaton & Vassal... Many more would surely deserve to be included in this list, and indeed, the thesis assumes the impossibility of including them all (for practical reasons) and even contemplates possible future extensions. The material included herein is to demonstrate the continuity in the approaches, statements and in the applied architectural design techniques, from which we can draw some conclusions. Today, one hundred years after Ford put up the moving assembly line, we still find this tradition alive in the words of the architect Richard Horden, whose work carries with it –as with the information embedded in every technical element- the whole techncial culture of a modern tradition. Horden is represented here as one of the exponents of what I have called the lineage of technologists. That is why I wanted to conclude the thesis with an interview to Richard Horden, held in May 2015 in his studio in London's Berkeley Square (see Appendices). Guides For the development of this thesis, another thesis, entitled: The mode of existence of technical objects, is taken as the main reference work. Read and published in 1958 by the French philosopher Gilbert Simondon [1924- 1989], it was dedicated to the ontology of the technical object. This work frames the intellectual approach of the thesis, which connects with phenomenology to mobilize a particular vision of Architecture. It is used as a model of ontological analysis to study its genesis, invention and evolutionary processes. To develop these, another work by the same author, titled Imagination and Invention (1965- 1966) has been used as a bibliographical complement. As for the disciplinary historical sources, Reyner P. Banham [1922-1988] and Martin E. Pawley [1938-2008] have been chosen as guides through the modern Architecture of the twentieth century. Their cronical reports on the First and Second Machine Age and their critical works have served as an index from which to reconstruct the imaginary of the modern technical object in the Machine Age7, and to stock up on projects and works of architecture, used as case studies for the thesis. These works have also been used as triggers for other literatures, which has been complementary to the former. Objectives of the Thesis The main objective of the thesis is to prove its hypothesis: if a work of architecture can be considered a technical object and under what conditions, building then a criterion for recognizing when a work of architecture meets the definition of a technical object. Another aim is to demonstrate the importance and power of Technology Transfer in the evolutionary process of Architecture, and to do it, some examples of a methodology for architectural design that Martin Pawley called 'Design by Assembly' are presented. It is also an objective to reconstruct an Atlas of the imaginary of the modern technical object, in order to better understand the causes, reasons and purposes that led modern architects to pursue architecture as a technical object. This Atlas allows to panoptically relate the various technical objects, revealing the true importance and significance of those and the architecture with whom they interact. Architectures are again at the largest and most complex industrial context and the history of technology, which always belonged. Thus, they are able to reveal all the knowledge-in the shape of information-carried in their own 'genetic' code, displaying full chapters of technological culture as old as mankind and constantly growing and evolving. Thesis: Proving the Hypothesis Simondon ontologically defined the technical object as ‘that of which genesis exists’ and that develops ‘a tendency towards solidarity and unity’. For an architecture to be recognized as a technical object, a number of conditions should be given, in the successive phases involved in their mode of existence: Imagination. These architectures refer to an imaginary featuring images-object other technical objects (technical sets, technical individuals and technical elements). These images are the means to an eidetic transfer of the technical objects which they symbolize. Invention. These architectures are the result of tectonic transfers, which occur during the architectural design process, by assembling materials, components or procedures used in industry for the production of other technical objects. Individuation. These architectures evolve and are individualized by ‘concretization’, a process leading to the full integration of its parts and aiming the full convergence of its functions into a single structure. This integration tends towards the naturalization of the technical object, by means of a symbiotic incorporation of their associated milieus. After checking if there is a genesis of them, which evolves through the phases of imagination and invention and concretization, their imaginary, materiality, structure and organization are analyzed in order to detect patterns and common organizational principles to other technical objects counterparts. Structure The main text of the thesis consists of three parts. Before there is an Introduction to the main concepts that are exploited in the thesis on ontology Simondonian technical object, and technology transfer applied to Architecture. Then a first part covers the Imaginary of the modern technical object, a second part is dedicated to the Invention and a third part to the individuation process The thesis ends with a section for the Discussion and the Conclusions. The Introduction to the technical object, this is ontologically defined and its different categories are distinguished. The process of genesis of the technical object and the phases of imagination, invention and indivuation are explained. Concepts as Transduction, Technicality and Technical system are presented for being fundamental to understand the concept of Technology Transfer that will take place later. The concretization is explained as the particular mode of individuation and evolution of technical objects, a process by which the different parts of a technical object, are integrated and begin a tendency towards a convergence in itself. The first part, dedicated to the Imagination of the architectural technical object presents a parcial "archaeological" reconstruction the imaginary of the modern technical object, intended to better understand its genesis and the relationship with other technical objects. The imaginary sources are searched in the premises of the Industry of the early twentieth century, and particularly in the factories of modern vehicles, in order to see, to what extent these technical objects were important to imagine modern architecture. The reconstruction is continued until the Second Machine Age, when a new, more inquisitive and precise gaze turns to other factories, other vehicles and other components and materials, inquiring now about their organizational qualities. The second part is devoted to the Invention of the architectural technical object. The effectiveness of the simondonian concept of Transduction is checked: a transmitted and transformed sign or information, which relates to Technology Transfer, a synergetic process by which an industrial sector benefits from the development of another sector, to which some architects and historians have explicitly referred to explain their works during Machine Age, and which is crucial for the development of the industry. Technology transfer would be the transmission of a set of information or knowledge about technique, including the factual sphere of technique, but also the sensitive sphere of experience. In their application to Architecture, these transfers have been classified according to three types: Eidetic, Tectonic and Organic. Eidetic Transfers operate from an intuitive knowledge and are useful for transmitting information about the essence of the technical object serving as a source. Abstract concepts are transmitted through the object-images to produce an equivalent transformation in Architecture. A group of concepts that have been the subject of technology transfers of eidetic nature, and have been originated in the imaginary of the modern technical object, have been detected as a result of the research: FABRICATED, INHABITABLE, FUNCTIONAL, EFFICIENT, OBSOLESCENT, and BEAUTIFUL. The transfers can also be Tectonic when, that which is transferred is a constructive or structural technique, applied through artificial MATERIALS such as metals, composites as the ferrocement, or plywood, or alloys such as aluminum; or by means of the assembly of STRUCTURES or parts of other technical objects such as hulls, fuselages, car bodies or rigs, resulting in the invention of a new architectural technical object. In the case of ORGANIC transfers, what is transferred is an organizational technique, applied by means of a set of PROCEDURES defining the activity of the architect as a technologist and inventor of technical objects. These procedures have a transformative effect on three traditional institutions for Architecture: the School, the Atelier and the Work, and the results are summarized in new models of organization of the Education of Architecture, with the onset of the Architectural Design Studios or workshops; new models of organization of the practice of architect: the technical office; and new models of space organization, based on the spatial organization of the industry, resulting in spatial patterns or spatial matrices; a new model of organization of the project, which uses graphical tools and industrail protocols as the assembly as a methodology; a new model of architectural production based on the industrialization. After explaining the concepts and the genesis of assembly and montage, Design by assembly is presented as a method that promotes architectural invention, and is shown using some case studies analyzed in the thesis, in which there has been made some conceptual, constructive or organizational transfer. After analyzing the architectures studied in the thesis, genetic method proposed by Simondon was used to understand every particular evolution, reconstructing their genealogical lines up to their ancestors, identifying a series of genetic lineages, which correspond to the technical sets studied in the thesis : the shipyard, the car factory, and aircraft factory. The real ancestors of Modernity. The spatial organization systems of these technical sets are directly related to the technical object that is fabricated within them. From that point, a number of operational matrices are defined (MILL, SHOP, SHED) and used to make a taxonomy of the architectural technical object. This is exemplified by some projects by architects as Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean and Richard Horden Kaplicky. Interest of the thesis Since the beginning of the new century, several authors have shown a renewed interest in defining what a project is, how it is constituted and what it is for. The approaches to the subject are brought from analytic philosophy (Galle, 2008) or from the philosophy of technology (Verbeek, 2005; Vermaas, 2009) and they often speak about the relationship between design and material culture (Dorschel 2003, 2010 or Preston Boradkar 2012). It is also important to note the recent and growing interest in the work of French philosopher Gilbert Simondon [1924-1989], mainly known for its important contribution to the philosophy of technology and phenomenology of the technical object, and the influence on the thinking of contemporary philosophers as Paolo Virno, Bruno Latour or Gilles Deleuze, being the latter a author present in many doctoral theses and theoretical research conducted at major architecture schools around the world since the 90s to the present. The republication and translation of the work of Simondon (eng. 1980, spn. 2008) has received the attention from current philosophers such as Bernard Stiegler who continues to use its study and analysis to advance his thinking, thus being present in the contemporary debate about the technique. After its recent translation into Spanish, the thought of Simondon has aroused great interest in Latin America, as evidenced by the organization of various conferences and symposia, as well as the proliferation of publications about his work and thought8. Future translations of the rest of his major works, will ensure increased introduction in the academic community. Efforts have been made to present an alternative view of the History of Modern Architecture, using a reporter as Reyner P.Banham as a guide. The Machine Age intersects Simondon’s mechanology and his "technical vitalism", resulting in a fresh, renewed and optimistic interpretation of some of the most important works of Architecture of the twentieth century, which will surely contribute to the development of this century’s Architecture, already immersed in the paradigm shift towards sustainability and ecology.