Impact radiologique liés au transport de matières radioactives par route en Espagne / Radiological impact associated with the transport by road of radioactive material in Spain

Questions relating to the transport of radioactive materials are very much an issue of current interest due to the increasing mobility of the materials involved in the nuclear fuel cycle, commitment to the environment, the safety and protection of persons and the corresponding regulatory legal framework. The radiological impact associated with this type of transport was assessed by means of a new data-processing tool that may be of use and serve as complementary documentation to that included in transport regulations. Thus, by determining the level of radiation at a distance of one metre from the transport vehicle and by selecting a route, the associated impacts will be obtained, such as the affected populations, the dose received by the most highly exposed individual, the overall radiological impact, the doses received by the population along the route and the possible detriment to their health. The most important conclusion is that the emissions of ionising radiation from the transport of radioactive material by road in Spain are not significant as regards the generation of adverse effects on human health, and that their radiological impact may be considered negligible.

Epitaxial self-alignment: A new route to hybrid active plasmonic nanostructures

Concepts of lateral ordering of epitaxial semiconductor quantum dots (QDs) are for the first time transferred to hybrid nanostructures for active plasmonics. We review our recent research on the self-alignment of epitaxial nanocrystals of In and Ag on ordered one-dimensional In(Ga)As QD arrays and isolated QDs by molecular beam epitaxy. By changing the growth conditions the size and density of the metal nanocrystals are easily controlled and the surface plasmon resonance wavelength is tuned over a wide range in order to match the emission wavelength of the QDs. Photoluminescence measurements reveal large enhancement of the emitted light intensity due to plasmon enhanced emission and absorption down to the single QD level.

Effect of the Synthesis Route on the Microstructure and the Dielectric Behavior of CaCu3Ti4O12 Ceramics

CaCu3Ti4O12 (CCTO) was prepared by a conventional synthesis (CS) and through reaction sintering, in which synthesis and sintering of the material take place in one single step. The microstructure and the dielectric properties of CCTO have been studied by XRD, FE-SEM, EDS, AFM, and impedance spectroscopy to correlate structure, microstructure, and electrical properties. Samples prepared by reactive sintering show very similar dielectric behavior to those prepared by CS. Therefore, it is possible to prepare CCTO by means of a single-step processing method.

La rehabilitación de construcciones militares para uso hotelero: la red de Paradores de Turismo, (1928-2012)

Fundamento de la tesis: Al comienzo del siglo XX, el interés por el turismo unido a la necesidad de restaurar un abundante patrimonio histórico, posibilitó en España que los poderes públicos se embarcaran en una singular experiencia: la creación de una infraestructura hotelera a partir de la rehabilitación de edificios históricos. La preservación, mantenimiento e incluso rentabilidad de una gran parte del patrimonio español se haría efectiva a través de la innovadora fórmula patrimonio‐turismo, cuya máxima expresión se materializó en la Red de Paradores desde su fundación en la segunda década del siglo pasado hasta nuestros días. Sorprendentemente, este tema no ha sido todavía investigado en su vertiente arquitectónica pese a que España ha sido pionera y modelo en la cuestión de la hotelería pública. Este trabajo aborda el estudio del caso más significativo de todos los edificios de la red, en tanto que el patrimonio que ha servido de base a los fines hoteleros del Estado ha contado con un total de seis tipos arquitectónicos a lo largo de su historia, dentro de los cuales la arquitectura militar despunta con su mayoritaria presencia dentro del contexto de los edificios históricos de la red. El carácter arquetípico de los castillos y fortalezas, arraigado en el inconsciente colectivo, les hizo especialmente atractivos como alojamiento turístico al permitir evocar la remota época medieval, pese a ser el tipo arquitectónico más comprometido para la rehabilitación hotelera. El estudio de las intervenciones operadas en estos inmuebles se revela de forma clara como escaparate de los distintos criterios de intervención patrimonial que se han sucedido en el siglo XX, hasta enlazar con la perspectiva interdisciplinar actual. La tesis abarca en, primer lugar, diferentes aspectos generales relativos al promotor hotelero, la hotelería pública de ámbito nacional e internacional, y la caracterización de los inmuebles de la red estatal española, desde el punto de vista hotelero y arquitectónico, entendida esta última en sus tres escalas de influencia: la arquitectónica, la urbana o paisajística, y la del interiorismo. Se analiza en segundo término la arquitectura militar dentro del contexto de la Red de Paradores, desde la consideración de su transformación hotelera, para lo cual ha sido necesario realizar una clasificación propia, que abarca tanto edificios que respondieron a una estructura de cuartel, como castillos‐palacio, o fortalezas que habían servido a los fines de una orden religiosa militar, además de considerarse las intervenciones en recintos históricos de carácter militar, donde se hacía obligatorio construir de nueva planta. En tercer y último lugar, se analiza a lo largo de las distintas etapas del organismo turístico las rehabilitaciones realizadas en estas construcciones militares, a la vez que se tienen en cuenta las intervenciones en los restantes edificios históricos, para evitar la descontextualización. Este recorrido comienza con la promoción de los dos primeros paradores a cargo del Comisario Regio, el marqués de la Vega‐Inclán, que sirvieron para sentar las bases de los conceptos e ideas que habrían de desarrollarse en las siguientes décadas. Posteriormente, se desarrolló y tomó forma la red con el Patronato Nacional del Turismo, en la que las primeras intervenciones en tipos militares se tradujeron en reformas interiores de locales. La etapa clave de la red, y en particular de la arquitectura militar, tuvo lugar con el Ministerio de Información y Turismo, marcada por la “repristinación” de monumentos, tras un período preparatorio con la Dirección General del Turismo en el que lo militar había quedado de telón de fondo de otros tipos arquitectónicos. Tras el auge del Ministerio llegó el período de decadencia en el que los castillos y fortalezas desaparecieron de los intereses de las Secretarias de Turismo, hasta llegar a las inauguraciones de los novedosos establecimientos del siglo XXI y el resurgimiento del tipo militar con el parador de Lorca. Metodología empleada: Este trabajo de investigación se ha servido fundamentalmente de documentación inédita, procedente de diversos archivos, además de una muy extensa toma de datos in situ. Dentro del patrimonio analizado, los inmuebles que responden al tipo arquitectónico militar se han dividido en tres grandes grupos: inmuebles rehabilitados que entraron en funcionamiento en la red, inmuebles en proceso de transformación hotelera, e inmuebles que fueron adquiridos con fines hoteleros pero que no llegaron a rehabilitarse. Para cada uno de ellos ha sido necesario determinar en qué estado llegaron a manos de la Administración Turística, cuál fue el mecanismo a través del cual se adquirieron, en qué consistió su primera rehabilitación hotelera, y cuáles fueron las ampliaciones o reformas más significativas que se realizaron posteriormente. Estos datos se han sintetizado en fichas y se han extraído conclusiones al comparar cada unidad con el conjunto. Simultáneamente se introdujeron dos factores externos: la historia del turismo que permitió hacer una ordenación cronológica de los inmuebles según etapas, y la historia de la teoría y práctica de la intervención patrimonial en España que permitió comparar los criterios patrimoniales de la Administración competente respecto de las intervenciones de la Administración Turística, cuyo contacto se haría obligatorio a partir del Decreto, de 22 de abril de 1949, que dejaba bajo la tutela del Estado a todos los castillos y fortalezas. Aportación de la tesis: Con carácter general, la tesis centra una ordenación y sistematización completa del patrimonio inmobiliario de la red, desde el punto de vista de los tipos hoteleros y arquitectónicos, además de poner por primera vez en conexión distintos modelos de hotelería pública, para constituirse en el sustrato de futuras investigaciones. El estudio realizado se ha hecho extensivo a las distintas escalas que inciden de forma interconectada en la implantación de un parador: la arquitectónica, la urbana y la del interiorismo, hasta ahora referenciado desde la exclusiva visión arquitectónica. Se han definido las etapas de la historia de la red, no ya sólo a partir del hilo conductor de la cadena sucesiva de organismos turísticos, sino que por primera vez se hace en razón de la evolución que sufren las intervenciones patrimoniales a lo largo del tiempo, a la vez que se entra en conexión con la teoría y praxis de la restauración monumental. Con carácter particular, la arquitectura militar dentro del contexto de los paradores se destaca en el período del Ministerio, en el que se experimentaron todas las posibilidades que presentaba su rehabilitación. En este sentido se ha puesto de manifiesto en este trabajo un tipo híbrido de parador, a caballo entre la rehabilitación y la edificación de nueva planta, las dos formas básicas de establecimiento creadas en la Comisaría Regia, al que se ha denominado edificación de nueva planta en recinto histórico militar. Esta nueva caracterización se ha valorado como la forma más eficiente de implantar paradores, cuyas pautas arquitectónicas abarcaron un abanico de posibilidades: imitación de modelos arquitectónicos históricos con utilización de elementos patrimoniales prestados que dieran el valor de la historia, utilización de un lenguaje moderno, o la inspiración en la arquitectura vernácula. La amalgama de elementos, estilos e intervenciones sucesivas de ampliación fue la característica común tanto para la implantación de un parador en un edificio como en un recinto amurallado. La arquitectura militar transformada en establecimiento hotelero evidencia la vocación escenográfica de las intervenciones patrimoniales, secundada por el interiorismo, además de su aportación a la arquitectura hotelera en lo referente al confort, organización y funcionamiento de sus instalaciones. La tesis ahonda en los diversos aspectos de la rehabilitación hotelera apuntados de forma parcial por algunos autores, y pone de manifiesto la “ambientación medieval” operada en la arquitectura militar, que llegó a tener su máxima expresión con el criterio de la “unidad de estilo” del Ministerio de Información y Turismo. La rehabilitación hotelera dentro del contexto de la Red de Paradores, queda caracterizada en la tesis en relación a intervenciones en construcciones militares, cuya sistematización puede ser extrapolable a otros tipos arquitectónicos o cadenas hoteleras de titularidad pública, a partir del estudio que se ha avanzado en este trabajo. Thesis basis: At the beginning of the 20th century the interest in tourism added to the plentiful heritage in Spain enabled the authorities to embark on a singular experience: the creation of a hotel infrastructure from the restoration of historic buildings. Preservation, maintenance, and even profitability of a large part of the Spanish heritage would be effective through the innovative formula heritage-tourism. Its greatest expression materialized in the Paradores Network since its foundation in last century’s second decade to the present day. Surprisingly, this subject has not yet been investigated in its architectural aspect, even though Spain has been a pioneer and a model in the matter of public hotel business. This project tackles the study of the most significative case of all the network’s buildings, since the heritage which has served throughout history as a base for the State hotel purposes has altogether six architectural types, among which military architecture stands out with its majority presence in the context of the historical buildings of the network. The archetypal character of castles and fortresses, ingrained in the collective subconscious, made them specially attractive for tourist accommodation, as it allowed the evocation of far medieval times, despite being the most awkward architectural type for hotel restoration. The study of the interventions in these buildings clearly reveals itself as a showcase of the different criteria of heritage intervention along the 20th century, connecting to the present interdisciplinary perspective. Firstly, the thesis covers different general aspects regarding the hotel developer, the domestic and international public hotel business, and the description of the Spanish state network buildings from a hotel business and an architectural point of view, the latter from its three influence scales: architectural, urban or landscape, and interior design. Secondly, the transformation of the military architecture in the Paradores Network into hotels is analyzed. For that purpose it was necessary to create a specific classification, which included barrack-structured buildings, castle-palaces, or fortresses which served the purposes of military-religious orders. The interventions in those military historical places where new building became compulsory were also taken into consideration. Thirdly and lastly, the thesis analyses the restorations in these military constructions through the different stages of the tourist organization. In order to avoid decontextualization, interventions in other historical buildings were also considered. This route begins with the promotion of the two first Paradores by the Royal Commissioner, the marquis of Vega-Inclán, which paved the way for the concepts and ideas that were developed in the following decades. Subsequently, the network was developed and took shape with the National Tourism Board. The first interventions on military types were inside refurbishments. The Network’s key period, and in particular of its military architecture, took place with the Ministry of Information and Tourism, a time marked by the “restoration to its original state” of monuments. This stage arrived after a preparatory period with the State Tourist Office, when the military type was left as a backdrop for other architectural types. After the Ministry’s boom arrived a decline, in which castles and fortresses disappeared from the Tourist Department’s interests up to the opening of the 21st century new establishments and the resurgence of the military type with Lorca’s Parador. Methodology: The present research project has mainly used unpublished documentation from several archives and has done an extensive in situ data-gathering. Within the heritage analyzed, military buildings have been divided into three main groups: restored buildings that began to operate in the network, those in process of hotel transformation, and those acquired for hotel purposes, but which did not become restored. In each case, it has been necessary to determine the condition in which they arrived to the Tourist Administration, the procedure by which they were acquired, what their first hotel restoration consisted of, and which their subsequent most significative enlargements and alterations were. These facts have been synthesized in cards, and conclusions were drawn by comparing each unit with the whole. Simultaneously, two external factors were introduced: the history of tourism, that allowed establishing a chronological order according to different periods, and the history of Spanish heritage intervention’s theory and practice, that permitted to compare the heritage criteria from the competent Administration with those of the Tourist Administration’s interventions. Both Administrations came compulsorily into contact after the Decree of 22nd April 1949, by which all castles and fortresses became under the protection of the State. Thesis contribution: In general, the thesis focuses on a complete order and systematization of the network’s heritage buildings from the hotel and architectural types points of view, besides connecting for the first time different public hotel business models, becoming the substratum for future investigations. The study has included the different scales that impact interconnected on the establishment of a Parador: architectural, urban and interior design, only referenced to date from an architectural point of view. The Network’s history stages have been defined according to not only a consecutive series of tourist organizations, but also, and for the first time, to the evolution of heritage interventions over time, thus connecting with the theory and praxis of monumental restoration. In particular, within the Paradores, military architecture stands out in the Ministry’s period, in which all kind of restoration possibilities were explored. In this sense, the present project puts forth a hybrid type of Parador between restoration and new building, the two basic ways of establishment created in the Royal Commission, termed new building in military historic enclosure. This new characterization has been evaluated as the most efficient for establishing Paradores, whose architectonic guidelines include a wide range of possibilities: the imitation of historical architectonic models with use of borrowed heritage components that provide historical value, the use of modern language, or the inspiration in vernacular architecture. The amalgam of elements, styles and consecutive enlargement interventions was the common feature of the establishment of a Parador, both in a building or in a walled enclosure. The military architecture transformed into a hotel establishment gives proof of the scenographic vocation of heritage interventions, supported by interior design, as well as of its contribution to hotel architecture, related to its comfort, organization and the functioning of its facilities. The thesis delves into the diverse aspects of hotel restoration, partially pointed out by several authors, and puts forth the creation of a “medieval atmosphere” in military architecture, which came to its highest expression with the “unitary style” criteria of the Ministry of Information and Tourism. Hotel restoration within the context of the Paradores’ Network is defined in this thesis in relation to interventions in military constructions, whose systemization can be extrapolative to other architectural types or public hotel chains, based on the study which has been put forward in this project.

Rammed earth walls in the late middle age castles in the actual province of Soria, Spain

This paper analyzed the building techniques based in the use of rammed earth in the Late Medieval fortifications in the province of Soria, Spain. The manorial castles of Serón de Nágima and Yanguas were built completely with rammed earth. However, these techinques are different. Through the study of the constructive signals, we can reconstruct the constructive process and made an hypothesis of the auxiliary scaffolding necessary for the construction. After, other four cases in which there is presence of rammed earth are described: Ágreda, Arcos de Jalón, Caracena and the tower of Martín González or castle of La Raya (the Border). Rammed earth is used in some secondary architectural elements and also as a filling of the masonry walls, but somtimes there are ancient rammed earth walls overlaid with stone masonry.

Development of a 3-Dimensional Mathematical Collision Risk Model Based on Recorded Aircraft Trajectories to Estimate the Safety Level in High Density En-Route Airspaces

Como en todos los medios de transporte, la seguridad en los viajes en avión es de primordial importancia. Con los aumentos de tráfico aéreo previstos en Europa para la próxima década, es evidente que el riesgo de accidentes necesita ser evaluado y monitorizado cuidadosamente de forma continúa. La Tesis presente tiene como objetivo el desarrollo de un modelo de riesgo de colisión exhaustivo como método para evaluar el nivel de seguridad en ruta del espacio aéreo europeo, considerando todos los factores de influencia. La mayor limitación en el desarrollo de metodologías y herramientas de monitorización adecuadas para evaluar el nivel de seguridad en espacios de ruta europeos, donde los controladores aéreos monitorizan el tráfico aéreo mediante la vigilancia radar y proporcionan instrucciones tácticas a las aeronaves, reside en la estimación del riesgo operacional. Hoy en día, la estimación del riesgo operacional está basada normalmente en reportes de incidentes proporcionados por el proveedor de servicios de navegación aérea (ANSP). Esta Tesis propone un nuevo e innovador enfoque para evaluar el nivel de seguridad basado exclusivamente en el procesamiento y análisis trazas radar. La metodología propuesta ha sido diseñada para complementar la información recogida en las bases de datos de accidentes e incidentes, mediante la provisión de información robusta de los factores de tráfico aéreo y métricas de seguridad inferidas del análisis automático en profundidad de todos los eventos de proximidad. La metodología 3-D CRM se ha implementado en un prototipo desarrollado en MATLAB © para analizar automáticamente las trazas radar y planes de vuelo registrados por los Sistemas de Procesamiento de Datos Radar (RDP) e identificar y analizar todos los eventos de proximidad (conflictos, conflictos potenciales y colisiones potenciales) en un periodo de tiempo y volumen del espacio aéreo. Actualmente, el prototipo 3-D CRM está siendo adaptado e integrado en la herramienta de monitorización de prestaciones de Aena (PERSEO) para complementar las bases de accidentes e incidentes ATM y mejorar la monitorización y proporcionar evidencias de los niveles de seguridad. ABSTRACT As with all forms of transport, the safety of air travel is of paramount importance. With the projected increases in European air traffic in the next decade and beyond, it is clear that the risk of accidents needs to be assessed and carefully monitored on a continuing basis. The present thesis is aimed at the development of a comprehensive collision risk model as a method of assessing the European en-route risk, due to all causes and across all dimensions within the airspace. The major constraint in developing appropriate monitoring methodologies and tools to assess the level of safety in en-route airspaces where controllers monitor air traffic by means of radar surveillance and provide aircraft with tactical instructions lies in the estimation of the operational risk. The operational risk estimate normally relies on incident reports provided by the air navigation service providers (ANSPs). This thesis proposes a new and innovative approach to assessing aircraft safety level based exclusively upon the process and analysis of radar tracks. The proposed methodology has been designed to complement the information collected in the accident and incident databases, thereby providing robust information on air traffic factors and safety metrics inferred from the in depth assessment of proximate events. The 3-D CRM methodology is implemented in a prototype tool in MATLAB © in order to automatically analyze recorded aircraft tracks and flight plan data from the Radar Data Processing systems (RDP) and identify and analyze all proximate events (conflicts, potential conflicts and potential collisions) within a time span and a given volume of airspace. Currently, the 3D-CRM prototype is been adapted and integrated in AENA’S Performance Monitoring Tool (PERSEO) to complement the information provided by the ATM accident and incident databases and to enhance monitoring and providing evidence of levels of safety.

Development of One Meter Long Double-Sided CeO2 Buffered Ni-5at.W Templates by Reel-to-Reel Chemical Solution Deposition Route

High performance long-length coated conductors fabricated using various techniques have attracted a lot of interest recently. In this work, a reel-to-reel design for depositing double-sided coatings on long-length flexible metallic tapes via a chemical solution method is proposed and realized. The major achievement of the design is to combine the dip coating and drying processes in order to overcome the technical difficulties of dealing with the wet films on both sides of the tape. We report the successful application of the design to fabricate a one-meter-long double side coated CeO2/Ni-5at%W template. The CeO2 films on both sides exhibit a dense, crack-free morphology, and a high fraction of cube texture on the surface. Homogeneity studies on global texture over the length also reveal that the average full width at half maximum values of the in-plane and out-of-plane orientation on the CeO2 layer are 7.2 ° and 5.8° with standard deviation of 0.26° and 0.34°, respectively, being indicative of the high quality epitaxial growth of the films prepared in the continuous manner. An all chemical solution derived YBCOLow-TFA/Ce0.9La0.1O2 /Gd2Zr2O7/CeO2 structure is obtained on a short sample, demonstrating the possibility of producing long-length texture templates for coated conductors by this low cost deposition route.

Route-back delivery protocol for collection tree protocol-based applications

We propose the Route-back Delivery (RBD) protocol; a routing mechanism to create reverse routes exploiting the Collection Tree Protocol to allow unicast data dissemination from the sink. The main goal of this work is to provide a mechanism to enable bi-directional communications among the root(s) and specific sensor nodes in data gathering applications that does not use broadcast only mechanisms. The main objective of the root-to-remote-nodes route creation is to disseminate short messages to change application parameters in a unicast fashion. This facilitates remote configurability in heterogeneous WSN deployments.