Introduction to technical communications of the 26th Int'l. Conference on logic programming (ICLP'10)

Abstract is not available.

Making Transport Safer: V2V-Based Automated Emergency Braking System

An important goal in the field of intelligent transportation systems (ITS) is to provide driving aids aimed at preventing accidents and reducing the number of traffic victims. The commonest traffic accidents in urban areas are due to sudden braking that demands a very fast response on the part of drivers. Attempts to solve this problem have motivated many ITS advances including the detection of the intention of surrounding cars using lasers, radars or cameras. However, this might not be enough to increase safety when there is a danger of collision. Vehicle to vehicle communications are needed to ensure that the other intentions of cars are also available. The article describes the development of a controller to perform an emergency stop via an electro-hydraulic braking system employed on dry asphalt. An original V2V communication scheme based on WiFi cards has been used for broadcasting positioning information to other vehicles. The reliability of the scheme has been theoretically analyzed to estimate its performance when the number of vehicles involved is much higher. This controller has been incorporated into the AUTOPIA program control for automatic cars. The system has been implemented in Citroën C3 Pluriel, and various tests were performed to evaluate its operation.

Efficiency improvement of HF communications using cognitive radio principles

Cognitive Radio principles can be applied to HF communications to make a more efficient use of the extremely scarce spectrum. In this contribution we focus on analyzing the usage of the available channels done by the legacy users, which are regarded as primary users since they are allowed to transmit without resorting any smart procedure, and consider the possibilities for our stations -over the HFDVL (HF Data+Voice Link) architecture- to participate as secondary users. Our goal is to enhance an efficient use of the HF band by detecting the presence of uncoordinated primary users and avoiding collisions with them while transmitting in different HF channels using our broad-band HF transceiver. A model of the primary user activity dynamics in the HF band is developed in this work. It is based on Hidden Markov Models (HMM) which are a powerful tool for modelling stochastic random processes, and is trained with real measurements from the 14 MHz band.

Optical signal processing with electrooptic modulators and dispersion

A review of the main techniques that have been proposed for temporal processing of optical pulses that are the counterpart of the well-known spatial arrangements will be presented. They are translated to the temporal domain via the space-time duality and implemented with electrooptical phase and amplitude modulators and dispersive devices. We will introduce new variations of the conventional approaches and we will focus on their application to optical communications systems

Desarrollo de una GUI para el estudio de Sistemas de Comunicaciones Ópticas

El peso específico de las Comunicaciones Ópticas dentro del ámbito de la Ingeniería de Telecomunicación no cesa de crecer. Sus aplicaciones, inicialmente dedicadas a las grandes líneas que enlazan las centrales de conmutación, alcanzan en la actualidad, como se ha mencionado, hasta los mismos hogares. Los progresos en este campo, con una sucesión sin tregua, no sólo se destinan a incrementar la capacidad de transmisión de los sistemas, sino a ampliar la diversidad de los procesos que sobre las señales se efectúan en el dominio óptico. Este dinamismo demanda a los profesionales del sector una revisión y actualización de sus conocimientos que les permitan resolver con soltura las cuestiones de su actividad de ingeniería. Por otra parte, durante los últimos años la importancia de las Comunicaciones Ópticas también se ha reflejado en las diferentes titulaciones de Ingenierías de Telecomunicación, cuyos planes de estudio contemplan esta materia tanto en asignaturas troncales como optativas. A menudo, las fuentes de información disponibles abordan esta disciplina con una orientación principalmente teórica. Profesionales y estudiantes de Ingeniería, pues, frente a esta materia se encuentran unos temas que tratan fenómenos físicos complejos, abundantes en conceptos abstractos y con un florido aparato matemático, pero muchas veces carentes de una visión práctica, importantísima en ingeniería, y que es, en definitiva, lo que se exige a alumnos e ingenieros: saber resolver problemas y cuestiones relacionados con las Comunicaciones Ópticas. Los sistemas de comunicaciones ópticas, y en especial aquellos que utilizan la fibra óptica como medio para la transmisión de información, como se ha dicho, están alcanzando un desarrollo importante en el campo de las telecomunicaciones. Las bondades que ofrece la fibra, de sobra conocidos y mencionados en el apartado que antecede (gran ancho de banda, inmunidad total a las perturbaciones de origen electromagnético, así como la no producción de interferencias, baja atenuación, etc.), han hecho que, hoy en día, sea uno de los campos de las llamadas tecnologías de la información y la comunicación que presente mayor interés por parte de científicos, ingenieros, operadores de telecomunicaciones y, por supuesto, usuarios. Ante esta realidad, el objetivo y justificación de la realización de este proyecto, por tanto, no es otro que el de acercar esta tecnología al futuro ingeniero de telecomunicaciones, y/o a cualquier persona con un mínimo de interés en este tema, y mostrarle de una forma práctica y visual los diferentes fenómenos que tienen lugar en la transmisión de información por medio de fibra óptica, así como los diferentes bloques y dispositivos en que se divide dicha comunicación. Para conseguir tal objetivo, el proyecto fin de carrera aquí presentado tiene como misión el desarrollo de una interfaz gráfica de usuario (GUI, del inglés Graphic User Interface) que permita a aquel que la utilice configurar de manera sencilla cada uno de los bloques en que se compone un enlace punto a punto de fibra óptica. Cada bloque en que se divide este enlace estará compuesto por varias opciones, que al elegir y configurar como se quiera, hará variar el comportamiento del sistema y presentará al usuario los diferentes fenómenos presentes en un sistema de comunicaciones ópticas, como son el ruido, la dispersión, la atenuación, etc., para una mejor comprensión e interiorización de la teoría estudiada. Por tanto, la aplicación, implementada en MATLAB, fruto de la realización de este PFC pretende servir de complemento práctico para las asignaturas dedicadas al estudio de las comunicaciones ópticas a estudiantes en un entorno amigable e intuitivo. Optical Communications in the field of Telecommunications Engineering continues to grow. Its applications, initially dedicated to large central lines that link the switching currently achieved, as mentioned, to the same household nowadays. Progress in this field, with a relentless succession, not only destined to increase the transmission capacity of the systems, but to broaden the diversity of the processes that are performed on the signals in the optical domain. This demands to professionals reviewing and updating their skills to enable them resolve issues easily. Moreover, in recent years the importance of optical communications is also reflected in the different degrees of Telecommunications Engineering, whose curriculum contemplates this area. Often, the information sources available to tackle this discipline mainly theoretical orientation. Engineering professionals and students are faced this matter are few topics discussing complex physical phenomena, and abstract concepts abundant with a flowery mathematical apparatus, but often wotput a practical, important in engineering, and that is what is required of students and engineers: knowing how to solve problems and issues related to optical communications. Optical communications systems, particularly those using optical fiber as a medium for transmission of information, as stated, are reaching a significant development in the field of telecommunications. The advantages offered by the fiber, well known and referred to in the preceding paragraph (high bandwidth, immunity to electromagnetic disturbances of origin and production of non interference, low attenuation, etc..), have made today, is one of the fields of information and communication technology that this increased interest by scientists, engineers, telecommunications operators and, of course, users. Given this reality, the purpose and justification of this project is not other than to bring this technology to the future telecommunications engineer, and / or anyone with a passing interest in this subject, and showing of a practical and various visual phenomena occurring in the transmission of information by optical fiber, as well as different blocks and devices in which said communication is divided. To achieve that objective, the final project presented here has as its mission the development of a graphical user interface (GUI) that allows the user to configure each of the blocks in which divided a point-to-point optical fiber. Each block into which this link will consist of several options to choose and configure it as you like, this will change the behavior of the system and will present to the user with the different phenomena occurring in an optical communication system, such as noise, dispersion, attenuation, etc., for better understanding and internalization of the theory studied. Therefore, the application, implemented in MATLAB, the result of the completion of the thesis is intended to complement practical subjects for the study of optical communications students in a friendly and intuitive environment.

Supporting eradication of maternal child malnutrition in developing countries: a case from Nicaragua scenario.

World Health Organization actively stresses the importance of health, nutrition and well-being of the mother to foster children development. This issue is critical in the rural areas of developing countries where monitoring of health status of children is hardly performed since population suffers from a lack of access to health care. The aim of this research is to design, implement and deploy an e-health information and communication system to support health care in 26 rural communities of Cusmapa, Nicaragua. The final solution consists of an hybrid WiMAX/WiFi architecture that provides good quality communications through VoIP taking advantage of low cost WiFi mobile devices. Thus, a WiMAX base station was installed in the health center to provide a radio link with the rural health post "El Carrizo" sited 7,4 km. in line of sight. This service makes possible personal broadband voice and data communication facilities with the health center based on WiFi enabled devices such as laptops and cellular phones without communications cost. A free software PBX was installed at "San José de Cusmapa" health care site to enable communications for physicians, nurses and a technician through mobile telephones with IEEE 802.11 b/g protocol and SIP provided by the project. Additionally, the rural health post staff (midwives, brigade) received two mobile phones with these same features. In a complementary way, the deployed health information system is ready to analyze the distribution of maternal-child population at risk and the distribution of diseases on a geographical baseline. The system works with four information layers: fertile women, children, people with disabilities and diseases. Thus, authorized staff can obtain reports about prenatal monitoring tasks, status of the communities, malnutrition, and immunization control. Data need to be updated by health care staff in order to timely detect the source of problem to implement measures addressed to alleviate and improve health status population permanently. Ongoing research is focused on a mobile platform that collects and automatically updates in the information system, the height and weight of the children locally gathered in the remote communities. This research is being granted by the program Millennium Rural Communities of the Technical University of Madrid.

HF spectrum activity prediction model based on HMM for cognitive radio applications

Although most of the research on Cognitive Radio is focused on communication bands above the HF upper limit (30 MHz), Cognitive Radio principles can also be applied to HF communications to make use of the extremely scarce spectrum more efficiently. In this work we consider legacy users as primary users since these users transmit without resorting to any smart procedure, and our stations using the HFDVL (HF Data+Voice Link) architecture as secondary users. Our goal is to enhance an efficient use of the HF band by detecting the presence of uncoordinated primary users and avoiding collisions with them while transmitting in different HF channels using our broad-band HF transceiver. A model of the primary user activity dynamics in the HF band is developed in this work to make short-term predictions of the sojourn time of a primary user in the band and avoid collisions. It is based on Hidden Markov Models (HMM) which are a powerful tool for modelling stochastic random processes and are trained with real measurements of the 14 MHz band. By using the proposed HMM based model, the prediction model achieves an average 10.3% prediction error rate with one minute-long channel knowledge but it can be reduced when this knowledge is extended: with the previous 8 min knowledge, an average 5.8% prediction error rate is achieved. These results suggest that the resulting activity model for the HF band could actually be used to predict primary users activity and included in a future HF cognitive radio based station.

Sistemas de provisionamiento para abonados de telefonía móvil

Este documento trata de la instalación del sistema de provisión de abonados “Provisioning Gateway” (PG) para el proyecto Machine to Machine (M2M) de Ericsson, una tecnología que permite definir los abonados o dispositivos serán usados en las comunicaciones máquina a máquina. El proyecto ha sido realizado en Ericsson para una compañía de telefonía de España. Se hablará de la evolución que han sufrido las redes de comunicaciones en los últimos años y las aplicaciones que surgen a partir de ellas. Se hará especial hincapié en la tecnología de red más utilizada hoy en día, el 3G, y en su sucesora, el 4G, detallando las novedades que incorpora. Después se describirá el trabajo realizado por el ingeniero de Ericsson durante la instalación del PG (Provisioning Gateway), un nodo de la red a través del cual la compañía telefónica da de alta a los abonados, modifica sus parámetros o los elimina de la base de datos. Se explicarán las distintas fases de las que se compone la instalación, tanto la parte hardware como la parte software y por último las pruebas de verificación con el cliente. Por último se darán algunas conclusiones sobre el trabajo realizado y los conocimientos adquiridos. ABSTRACT This document describes the installation of Provisioning Gateway system (PG) for Machine to Machine (M2M) project in Ericsson, which is a technology that allows companies to define the subscribers that will be used of machine to Machine communications. This project has been developed in Ericsson for a Spanish telecommunication company. The evolution of telecommunication networks is going to be introduced, describing al the services developed in parallel. 3G technology will be describer in a deeper way because it is the most used technology nowadays and 4G because it represents the future in telecommunications. Después se describirá el trabajo realizado por el ingeniero de Ericsson durante la instalación del PG (Provisioning Gateway), un nodo de la red a través del cuál la compañía telefónica da de alta a los abonados, modifica sus parámetros o los elimina de la base de datos. Se explicarán las distintas fases de las que se compone la instalación, tanto la parte hardware como la parte software y por último las pruebas de verificación con el cliente. Furthermore, this document shows the installation process of PG system made by the Ericsson´s engineer. Telecommunication companies use PG for creating, defining and deleting subscribers from the database. The different steps of the installation procedure will be described among this document, talking about hardware and software installation and the final acceptant test. Finally, some conclusions about the work done and experience learned will be exposed.

Time evolution of frequency components In a chaotic digital signal

The type of signals obtained has conditioned chaos analysis tools. Almost in every case, they have analogue characteristics. But in certain cases, a chaotic digital signal is obtained and theses signals need a different approach than conventional analogue ones. The main objective of this paper will be to present some possible approaches to the study of this signals and how information about their characteristics may be obtained in the more straightforward possible way. We have obtained digital chaotic signals from an Optical Logic Cell with some feedback between output and one of the possible control gates. This chaos has been reported in several papers and its characteristics have been employed as a possible method to secure communications and as a way to encryption. In both cases, the influence of some perturbation in the transmission medium gave problems both for the synchronization of chaotic generators at emitter and receiver and for the recovering of information data. A proposed way to analyze the presence of some perturbation is to study the noise contents of transmitted signal and to implement a way to eliminate it. In our present case, the digital signal will be converted to a multilevel one by grouping bits in packets of 8 bits and applying conventional methods of time-frequency analysis to them. The results give information about the change in signals characteristics and hence some information about the noise or perturbations present. Equivalent representations to the phase and to the Feigenbaum diagrams for digital signals are employed in this case.

Key reconciliation for high performance Quantum Key Distribution

Quantum Key Distribution is carving its place among the tools used to secure communications. While a difficult technology, it enjoys benefits that set it apart from the rest, the most prominent is its provable security based on the laws of physics. QKD requires not only the mastering of signals at the quantum level, but also a classical processing to extract a secret-key from them. This postprocessing has been customarily studied in terms of the efficiency, a figure of merit that offers a biased view of the performance of real devices. Here we argue that it is the throughput the significant magnitude in practical QKD, specially in the case of high speed devices, where the differences are more marked, and give some examples contrasting the usual postprocessing schemes with new ones from modern coding theory. A good understanding of its implications is very important for the design of modern QKD devices.

Estudio sobre un sistema de radiocomunicaciones ferroviarias de acuerdo al paradigma 4G

No hay duda de que el ferrocarril es uno de los símbolos del avance tecnológico y social de la humanidad, y su imparable avance desde el primer tercio del Siglo XIX así lo atestigua. No obstante, a lo largo de gran parte de su historia se ha mostrado algo renuente a abrazar ciertas tecnologías, lo que le ha causado ser tachado de conservador. Sin embargo, en los últimos años, coincidiendo con el auge masivo de los trenes de alta velocidad, los metropolitanos y los tranvías, muchas tecnologías han ido penetrando en el mundo del ferrocarril. La que hoy nos ocupa es una de las que mayor valor añadido le ha proporcionado (y que probablemente le proporcionará también en el futuro): las comunicaciones móviles. Actualmente el uso de este tipo de tecnologías en el entorno ferroviario puede calificarse como de inicial o, por seguir la nomenclatura de las comunicaciones móviles públicas, de segunda generación. El GSM-R en las líneas de alta velocidad es un caso (aunque de éxito al fin y al cabo) que define perfectamente el estado del arte de las comunicaciones móviles en este entorno, ya que proporcionó un gran valor añadido a costa de un gran esfuerzo de estandarización; ha supuesto un importante salto adelante en el campo de la fiabilidad de este tipo de sistemas, aunque tiene unas grandes limitaciones de capacidad y graves problemas de escalabilidad. Todo hace pensar que en 2025 el sustituto de GSM-R deberá estar en el mercado. En cualquier caso, se debería abandonar la filosofía de crear productos de nicho, que son extraordinariamente caros, y abrazar las filosofías abiertas de las redes de comunicaciones públicas. Aquí es donde LTE, la última gran estrella de esta familia de estándares, puede aportar mucho valor. La idea subyacente detrás de esta Tesis es que LTE puede ser una tecnología que aporte gran valor a las necesidades actuales (y probablemente futuras) del sector del ferrocarril, no solamente en las líneas y trenes de alta velocidad, sino en las denominadas líneas convencionales y en los metros y tranvías. Dado que es un campo aún a día de hoy que dista bastante de estar completamente estudiado, se ha explorado la problemática de la propagación electromagnética en los diferentes entornos ferroviarios, como pueden ser los túneles de metro y la influencia de las estructuras de los trenes. En este sentido, se ha medido de forma bastante exhaustiva en ambos entornos. Por otro lado, dado que los sistemas multiantena son uno de los pilares fundamentales de los modernos sistemas de comunicaciones, se ha verificado de forma experimental la viabilidad de esta tecnología a la hora de implementar un sistema de comunicaciones trentierra en un túnel. Asimismo, de resultas de estas medidas, se ha comprobado la existencia de ciertos fenómenos físicos que pueden suponer una merma en la eficiencia de este tipo de sistemas. En tercer lugar, y dado que uno de los grandes desafíos de las líneas de alta velocidad está provocado por la gran celeridad a la que se desplazan los trenes, se ha explorado la influencia de este parámetro en la eficiencia global de una red completa de comunicaciones móviles. Por supuesto, se ha hecho especial hincapié en los aspectos relacionados con la gestión de la movilidad (traspasos o handovers Por último, a modo de cierre de la Tesis, se ha tratado de identificar los futuros servicios de comunicaciones que aportarán más valor a las explotaciones ferroviarias, así como los requisitos que supondrán para las redes de comunicaciones móviles. Para los casos antes enunciados (propagación, sistemas multiantena, movilidad y desafíos futuros) se proporcionan las contribuciones ya publicadas en revistas y congresos internacionales, así como las que están enviadas para su revisión. ABSTRACT There is almost no doubt that railways are one of the symbols of the technological and social progress of humanity. However, most of the time railways have been somewhat reluctant to embrace new technologies, gaining some reputation of being conservative. But in the last years, together with the massive boom of high speed lines, subways and trams all over the world, some technologies have broken through these conservative resistance. The one which concerns us now is one of the most value-added (both today and in the future): mobile communications. The state-of-the-art of these technologies in the railway field could be called as incipient, or (following the mobile communications’ notation) ‘second generation’. GSM-R, the best example of mobile communications in railways is a success story that shows perfectly the state-of-the-art of this field: it provided a noticeable mark-up but also required a great standardization effort; it also meant a huge step forward in the reliability of these systems but it also needs to face some scalability issues and some capacity problems. It looks more than feasible that in 2025 the alternative to GSM-R should be already available. Anyway, the vision here should be forgetting about expensive niche products, and embracing open standards like public mobile communications do. The main idea behind this Thesis is that LTE could be a technology that provides a lot of added value to the necessities of the railways of today and the future. And not only to highspeed lines, but also to the so-called conventional rail, subways and tramways. Due to the fact that even today, propagation in tunnels and influence of car bodies is far from being full-studied, we measured in a very exhaustive way the EM propagation in these two environments. Also, multiantenna systems are one of the basic foundations of the modern communications systems, so we experimentally verified the feasibility of using such a system in a train-towayside in a tunnel. Moreover, from the measurements carried out we proved the existence of some physical phenomena that could imply a decrease in the performance of these multiantenna systems. In third place, we have explored the influence of high-speed in the whole performance of the network, from the mobility management point-of-view. This high-speed movement is one of the most relevant challenges for the mobile communications networks. The emphasis was placed on the mobility aspects of the radio resource management. Finally, the Thesis closure is an identification of the future communication services that could provide a bigger addition of value to railways, and also the requirements that imply to mobile communications networks. For all the previous for scenarios depicted before (propagation, multiantenna systems, mobility and challenges) we provide some contributions already published (or submitted for revision or still in progress) on publications and international conferences.

Application of virtual certification techniques to vehicle design and track maintenance

Virtual certification partially substitutes by computer simulations the experimental techniques required for rail vehicle certification. In this paper, several works were these techniques were used in the vehicle design and track maintenance processes are presented. Dynamic simulation of multibody systems was used to virtually apply the EN14363 standard to certify the dynamic behaviour of vehicles. The works described are: assessment of a freight bogie design adapted to meter-gauge, assessment of a railway track layout for a subway network, freight bogie design with higher speed and axle load, and processing of the data acquired by a track recording vehicle for track maintenance.

Autonomous vehicle control systems for safe crossroads

This article presents a cooperative manoeuvre among three dual mode cars – vehicles equipped with sensors and actuators, and that can be driven either manually or autonomously. One vehicle is driven autonomously and the other two are driven manually. The main objective is to test two decision algorithms for priority conflict resolution at intersections so that a vehicle autonomously driven can take their own decision about crossing an intersection mingling with manually driven cars without the need for infrastructure modifications. To do this, the system needs the position, speeds, and turning intentions of the rest of the cars involved in the manoeuvre. This information is acquired via communications, but other methods are also viable, such as artificial vision. The idea of the experiments was to adjust the speed of the manually driven vehicles to force a situation where all three vehicles arrive at an intersection at the same time.

Contribution of the noise radiated by a single vehicle to the road traffic noise

El ruido del tráfico rodado supone aproximadamente la mitad del ruido global ambiental. Las técnicas de control de ruido habitual en emisión (límites de emisión de vehículos) e inmisión (barreras acústicas, doble acristalamiento) no han sido suficientes para disminuir significativamente las molestias por el tráfico rodado en las últimas tres décadas. El efecto positivo de estas técnicas de control ha sido contrarrestado por el aumento de la densidad del tráfico. Por otra parte, la molestia del ruido del tráfico está altamente correlacionada con los niveles máximos de ruido (MNL), producidos por lo general por conductores agresivos. Sin embargo, los sistemas actuales de medición de ruido de tráfico se basan en una valoración global, por lo que no son capaces de discriminar entre los conductores silenciosos y ruidosos. Por lo tanto, en esta tesis se propone un sistema de medida de ruido en el campo cercano, que es capaz de medir la contribución de cada vehículo individual al ruido del tráfico rodado, permitiendo la detección de los conductores ruidosos. Este trabajo describe también una combinación de investigaciones analíticas y experimentales para la identificación de los conductores responsables de la generación de niveles máximos de ruido. El sistema se basa en dos micrófonos embarcados, uno para el ruido del motor y otro para el ruido de rodadura. Con el fin de relacionar estas mediciones de campo cercano con el ruido de los vehículos radiado al campo lejano, se desarrolla un procedimiento completo para la extrapolación del ruido medido por los micrófonos de campo próximo a las posiciones de campo lejano, usando una combinación de predicción analítica y mediciones experimentales. Las correcciones para los niveles extrapolados se deben a factores atmosféricos, al término de divergencia esférica y a las condiciones de absorción de la superficie de propagación. Para el micrófono situado próximo al motor, es necesario también caracterizar las propiedades acústicas del capó del motor. Ambos niveles de ruido se extrapolan de forma independiente a la posición de campo lejano, donde se realiza una comparación entre la predicción y mediciones para confirmar que la metodología es fiable para estimar el impacto a distancia del ruido de tráfico

Nationwide impact and vehicle to grid application of electric vehicles mobility using an activity based model

This paper describes the impact of electric mobility on the transmission grid in Flanders region (Belgium), using a micro-simulation activity based models. These models are used to provide temporal and spatial estimation of energy and power demanded by electric vehicles (EVs) in different mobility zones. The increment in the load demand due to electric mobility is added to the background load demand in these mobility areas and the effects over the transmission substations are analyzed. From this information, the total storage capacity per zone is evaluated and some strategies for EV aggregator are proposed, allowing the aggregator to fulfill bids on the electricity markets.