Determinant factors to discriminate the body weight loss in overweight people

Introduction. Most studies have described how the weight loss is when different treatments are compared (1-3), while others have also compared the weight loss by sex (4), or have taken into account psychosocial (5) and lifestyle (6, 7) variables. However, no studies have examined the interaction of different variables and the importance of them in the weight loss. Objective. Create a model to discriminate the range of weight loss, determining the importance of each variable. Methods. 89 overweight people (BMI: 25-29.9 kg?m-2), aged from 18 to 50 years, participated in the study. Four types of treatments were randomly assigned: strength training (S), endurance training (E), strength and endurance training (SE), and control group (C). All participants followed a 25% calorie restriction diet. Two multivariate discriminant models including the variables age, sex, height, daily energy expenditure (EE), type of treatment (T), caloric restriction (CR), initial body weight (BW), initial fat mass (FM), initial muscle mass (MM) and initial bone mineral density (BMD) were performed having into account two groups: the first and fourth quartile of the % of weight loss in the first model; the groups above and below the mean of the % of weight loss in the second model. The discriminant models were built using the inclusion method in SPSS allowing us to find a function that could predict the body weight loss range that an overweight person could achieve in a 6 months weight loss intervention.Results. The first discriminant analysis predicted that a combination of the studied variables would discriminate between the two ranges of body weight loss with 81.4% of correct classification. The discriminant function obtained was (Wilks? Lambda=0.475, p=0.003): Discriminant score=-18.266-(0.060xage)- (1.282xsex[0=female;1=male])+(14.701xheight)+(0.002xEE)- (0.006xT[1=S;2=E;3=SE;4=C])-(0.047xCR)- (0.558xBW)+(0.475xFM)+(0.398xMM)+(3.499xBMD) The second discriminant model obtained would discriminate between the two groups of body weight loss with 74.4% of correct classification. The discriminant function obtained was (Wilks? Lambda=0.725, p=0.005): Discriminant score=-5.021-(0.052xage)- (0.543xsex[0=female;1=male])+(3.530xheight)+(0.001xEE)- (0.493xT[1=S;2=E;3=SE;4=C])+(0.003xCR)- (0.365xBW)+(0.368xFM)+(0.296xMM)+(4.034xBMD) Conclusion. The first developed model could predict the percentage of weight loss in the following way: if the discriminant score is close to 1.051, the range of weight loss will be from 7.44 to -4.64% and if it is close to - 1.003, the range will be from -11.03 to -25,00% of the initial body weight. With the second model if the discriminant score is close to 0.623 the body weight loss will be above -7.93% and if it is close to -0.595 will be below - 7.93% of the initial body weight. References. 1. Brochu M, et al. Resistance training does not contribute to improving the metabolic profile after a 6-month weight loss program in overweight and obese postmenopausal women. J Clin Endocrinol Metab. 2009 Sep;94(9):3226-33. 2. Del Corral P, et al. Effect of dietary adherence with or without exercise on weight loss: a mechanistic approach to a global problem. J Clin Endocrinol Metab. 2009 May;94(5):1602-7. 3. Larson-Meyer DE, et al. Caloric Restriction with or without Exercise: The Fitness vs. Fatness Debate. Med Sci Sports Exerc. 2010;42(1):152-9. 4. Hagan RD, et al. The effects of aerobic conditioning and/or caloric restriction in overweight men and women. Medicine & Science in Sports & Exercise. 1986;18(1):87-94. 5. Teixeira PJ, et al. Mediators of weight loss and weight loss maintenance in middle-aged women. Obesity (Silver Spring). 2010 Apr;18(4):725-35. 6. Bautista-Castano I, et al. Variables predictive of adherence to diet and physical activity recommendations in the treatment of obesity and overweight, in a group of Spanish subjects. Int J Obes Relat Metab Disord. 2004 May;28(5):697-705.

Dual Active Bridge based Battery Charger for Plug-in Hybrid Electric Vehicle with Charging Current Containing Low Frequency Ripple

High power density is strongly preferable for the on-board battery charger of Plug-in Hybrid Electric Vehicle (PHEV). Wide band gap devices, such as Gallium Nitride HEMTs are being explored to push to higher switching frequency and reduce passive component size. In this case, the bulk DC link capacitor of AC-DC Power Factor Correction (PFC) stage, which is usually necessary to store ripple power of two times the line frequency in a DC current charging system, becomes a major barrier on power density. If low frequency ripple is allowed in the battery, the DC link capacitance can be significantly reduced. This paper focuses on the operation of a battery charging system, which is comprised of one Full Bridge (FB) AC-DC stage and one Dual Active Bridge (DAB) DC-DC stage, with charging current containing low frequency ripple at two times line frequency, designated as sinusoidal charging. DAB operation under sinusoidal charging is investigated. Two types of control schemes are proposed and implemented in an experimental prototype. It is proved that closed loop current control is the better. Full system test including both FB AC-DC stage and DAB DC-DC stage verified the concept of sinusoidal charging, which may lead to potentially very high power density battery charger for PHEV.

Estudio de las dinámicas de pérdida de peso corporal en los programas de ejercicio físico y nutrición = Study of the dynamics of body weight loss in exercise and nutritional programs

Introducción. La obesidad puede definirse como una enfermedad metabólica crónica de origen multifactorial, lo que provoca trastornos o problemas físicos y psicológicos a la persona, con patologías asociadas que limitan la esperanza de vida y deterioran la calidad de la misma, siendo determinante para sus áreas sociales y laborales. Este trastorno metabólico crónico se caracteriza por una acumulación excesiva de energía en el cuerpo en forma de grasa, lo que lleva a un aumento de peso con respecto al valor esperado por sexo, edad y altura. La gestión y el tratamiento de la obesidad tienen objetivos más amplios que la pérdida de peso e incluyen la reducción del riesgo y la mejora de la salud. Estos pueden ser alcanzados por la pérdida modesta de peso (es decir, 10.5% del peso corporal inicial), la mejora del contenido nutricional de la dieta y un modesto incremento en la actividad física y condición física. La dieta es uno de los métodos más populares para perder peso corporal. El ejercicio es otra alternativa para perder peso corporal. El aumento de ejercicio provoca un desequilibrio cuando se mantiene la ingesta calórica. También tiene ventajas, como la mejora del tono muscular, la capacidad cardiovascular, fuerza y flexibilidad, aumenta el metabolismo basal y mejora el sistema inmunológico. Objetivos. El objetivo de esta tesis es contribuir en un estudio de intervención para aclarar la evolución del peso corporal durante una intervención de dieta y ejercicio. Para ello, se evaluaron los efectos de la edad, sexo, índice de masa corporal inicial y el tipo de tratamiento en las tendencias de pérdida de peso. Otro objetivo de la tesis era crear un modelo de regresión lineal múltiple capaz de predecir la pérdida de peso corporal después del periodo de intervención. Y, por último, determinar el efecto sobre la composición corporal (peso corporal, índice de masa corporal, la masa grasa, y la masa libre de grasa) de las diferentes intervenciones basadas en ejercicios (fuerza, resistencia, resistencia combinada con fuerza, y las recomendaciones de actividad física (grupo control)) en combinación con dieta de adultos con sobrepeso y obesidad, después de la intervención, así como los cambios de la composición corporal 3 años más tarde. Diseño de la investigación. Los datos empleados en el análisis de esta tesis son parte del proyecto “Programas de Nutrición y Actividad Física para el tratamiento de la obesidad” (PRONAF). El proyecto PRONAF es un estudio clínico sobre programas de nutrición y actividad física para el sobrepeso y la obesidad, desarrollado en España durante varios años de intervención. Fue diseñado, en parte, para comparar diferentes tipos de intervención, con el objetivo de evaluar su impacto en las dinámicas de pérdida de peso, en personas con sobrepeso y obesidad. Como diseño experimental, el estudio se basó en una restricción calórica, a la que, en algunos casos, se le añadió un protocolo de entrenamiento (fuerza, resistencia, o combinado, en igualdad de volumen e intensidad). Las principales variables para la investigación que comprende esta tesis fueron: el peso corporal y la composición corporal (masa grasa y masa libre de grasa). Conclusiones. En esta tesis, para los programas de pérdida de peso en personas con sobrepeso y obesidad con un 25-30% de la restricción calórica, el peso corporal se redujo significativamente en ambos sexos, sin tener en cuenta la edad y el tipo de tratamiento seguido. Según los resultados del estudio, la pérdida de peso realizada por un individuo (hombre o mujer) durante los seis meses puede ser representada por cualquiera de las cinco funciones (lineal, potencial, exponencial, logarítmica y cuadrática) en ambos sexos, siendo la cuadrática la que tiende a representarlo mejor. Además, se puede concluir que la pérdida de peso corporal se ve afectada por el índice de masa corporal inicial y el sexo, siendo mayor para las personas obesas que para las de sobrepeso, que muestran diferencias entre sexos sólo en la condición de sobrepeso. Además, es posible calcular el peso corporal final de cualquier participante involucrado en una intervención utilizando la metodología del proyecto PRONAF sólo conociendo sus variables iniciales de composición corporal. Además, los cuatro tipos de tratamientos tuvieron resultados similares en cambios en la composición corporal al final del período de intervención, con la única excepción de la masa libre de grasa, siendo los grupos de entrenamiento los que la mantuvieron durante la restricción calórica. Por otro lado, sólo el grupo combinado logra mantener la reducción de la masa grasa (%) 3 años después del final de la intervención. ABSTRACT Introduction. Obesity can be defined as a chronic metabolic disease from a multifactorial origin, which leads to physical and psychological impacts to the person, with associated pathologies that limit the life expectancy and deteriorate the quality of it, being determinant for the social and labor areas of the person. This chronic metabolic disorder is characterized by an excessive accumulation of energy in the body as fat, leading to increased weight relative to the value expected by sex, age and height. The management and treatment of obesity have wider objectives than weight loss alone and include risk reduction and health improvement. These may be achieved by modest weight loss (i.e. 5–10% of initial body weight), improved nutritional content of the diet and modest increases in physical activity and fitness. Weight loss through diet is one of the most popular approaches to lose body weight. Exercise is another alternative to lose body weight. The increase of exercise causes an imbalance when the caloric intake is maintained. It also has advantages such as improved muscle tone, cardiovascular fitness, strength and flexibility, increases the basal metabolism and improves immune system. Objectives. The aim of this thesis is to contribute with an interventional study to clarify the evolution of the body weight during a diet and exercise intervention. For this, the effects of age, sex, initial body mass index and type of treatment on weight loss tendencies were evaluated. Another objective of the thesis was to create a multiple linear regression model able to predict the body weight loss after the intervention period. And, finally, to determine the effect upon body composition (body weight, body mass index, fat mass, and fat-free mass of different exercise-based interventions (strength, endurance, combined endurance and strength, and physical activity recommendations group (control group)) combined with diet in overweight and obese adults, after intervention as well as body composition changes 3 years later. Research Design. The data used in the analysis of this thesis are part of the project "Programs of Nutrition and Physical Activity for the treatment of obesity" (PRONAF). The PRONAF project is a clinical trial program about nutrition and physical activity for overweight and obesity, developed in Spain for several years of intervention. It was designed, in part, to compare different types of intervention, in order to assess their impact on the dynamics of weight loss in overweight and obese people. As experimental design, the study was based on caloric restriction, which, in some cases, added a training protocol (strength, endurance, or combined in equal volume and intensity). The main research variables comprising this thesis were: body weight and body composition outcomes (fat mass and fat-free mass). Conclusions. In this thesis, for weight loss programs in overweight and obese people with 25-30% of caloric restriction, the body weight was significantly decreased in both sexes, regardless the age and type of followed treatment. According to the results of the study, the weight loss performed by an individual (male or female) during six months can be represented by any of the five functions (linear, power law, exponential, logarithmic and quadratic) in both sexes, being the quadratic one which tends to represent it better. In addition, it can be concluded that the body weight loss is affected by the initial body mass index and sex condition, being greater for the obese people than for the overweight one, showing differences between sexes only in the overweight condition. Moreover, it is possible to calculate the final body weight of any participant engaged in an intervention using the PRONAF Project methodology only knowing their initial body composition variables. Furthermore, the four types of treatments had similar results on body composition changes at the end of the intervention period, with the only exception of fat-free mass, being the training groups the ones that maintained it during the caloric restriction. On the other hand, only the combined group achieved to maintain the fat mass (%) reduced 3 years after the end of the intervention.

A study of feature combination for vehicle detection based on image processing

Video analytics play a critical role in most recent traffic monitoring and driver assistance systems. In this context, the correct detection and classification of surrounding vehicles through image analysis has been the focus of extensive research in the last years. Most of the pieces of work reported for image-based vehicle verification make use of supervised classification approaches and resort to techniques, such as histograms of oriented gradients (HOG), principal component analysis (PCA), and Gabor filters, among others. Unfortunately, existing approaches are lacking in two respects: first, comparison between methods using a common body of work has not been addressed; second, no study of the combination potentiality of popular features for vehicle classification has been reported. In this study the performance of the different techniques is first reviewed and compared using a common public database. Then, the combination capabilities of these techniques are explored and a methodology is presented for the fusion of classifiers built upon them, taking into account also the vehicle pose. The study unveils the limitations of single-feature based classification and makes clear that fusion of classifiers is highly beneficial for vehicle verification.

Analysing the complexity of the model-based decision making processes within the industrial management context

PURPOSE The decision-making process plays a key role in organizations. Every decision-making process produces a final choice that may or may not prompt action. Recurrently, decision makers find themselves in the dichotomous question of following a traditional sequence decision-making process where the output of a decision is used as the input of the next stage of the decision, or following a joint decision-making approach where several decisions are taken simultaneously. The implication of the decision-making process will impact different players of the organization. The choice of the decision- making approach becomes difficult to find, even with the current literature and practitioners’ knowledge. The pursuit of better ways for making decisions has been a common goal for academics and practitioners. Management scientists use different techniques and approaches to improve different types of decisions. The purpose of this decision is to use the available resources as well as possible (data and techniques) to achieve the objectives of the organization. The developing and applying of models and concepts may be helpful to solve managerial problems faced every day in different companies. As a result of this research different decision models are presented to contribute to the body of knowledge of management science. The first models are focused on the manufacturing industry and the second part of the models on the health care industry. Despite these models being case specific, they serve the purpose of exemplifying that different approaches to the problems and could provide interesting results. Unfortunately, there is no universal recipe that could be applied to all the problems. Furthermore, the same model could deliver good results with certain data and bad results for other data. A framework to analyse the data before selecting the model to be used is presented and tested in the models developed to exemplify the ideas. METHODOLOGY As the first step of the research a systematic literature review on the joint decision is presented, as are the different opinions and suggestions of different scholars. For the next stage of the thesis, the decision-making process of more than 50 companies was analysed in companies from different sectors in the production planning area at the Job Shop level. The data was obtained using surveys and face-to-face interviews. The following part of the research into the decision-making process was held in two application fields that are highly relevant for our society; manufacturing and health care. The first step was to study the interactions and develop a mathematical model for the replenishment of the car assembly where the problem of “Vehicle routing problem and Inventory” were combined. The next step was to add the scheduling or car production (car sequencing) decision and use some metaheuristics such as ant colony and genetic algorithms to measure if the behaviour is kept up with different case size problems. A similar approach is presented in a production of semiconductors and aviation parts, where a hoist has to change from one station to another to deal with the work, and a jobs schedule has to be done. However, for this problem simulation was used for experimentation. In parallel, the scheduling of operating rooms was studied. Surgeries were allocated to surgeons and the scheduling of operating rooms was analysed. The first part of the research was done in a Teaching hospital, and for the second part the interaction of uncertainty was added. Once the previous problem had been analysed a general framework to characterize the instance was built. In the final chapter a general conclusion is presented. FINDINGS AND PRACTICAL IMPLICATIONS The first part of the contributions is an update of the decision-making literature review. Also an analysis of the possible savings resulting from a change in the decision process is made. Then, the results of the survey, which present a lack of consistency between what the managers believe and the reality of the integration of their decisions. In the next stage of the thesis, a contribution to the body of knowledge of the operation research, with the joint solution of the replenishment, sequencing and inventory problem in the assembly line is made, together with a parallel work with the operating rooms scheduling where different solutions approaches are presented. In addition to the contribution of the solving methods, with the use of different techniques, the main contribution is the framework that is proposed to pre-evaluate the problem before thinking of the techniques to solve it. However, there is no straightforward answer as to whether it is better to have joint or sequential solutions. Following the proposed framework with the evaluation of factors such as the flexibility of the answer, the number of actors, and the tightness of the data, give us important hints as to the most suitable direction to take to tackle the problem. RESEARCH LIMITATIONS AND AVENUES FOR FUTURE RESEARCH In the first part of the work it was really complicated to calculate the possible savings of different projects, since in many papers these quantities are not reported or the impact is based on non-quantifiable benefits. The other issue is the confidentiality of many projects where the data cannot be presented. For the car assembly line problem more computational power would allow us to solve bigger instances. For the operation research problem there was a lack of historical data to perform a parallel analysis in the teaching hospital. In order to keep testing the decision framework it is necessary to keep applying more case studies in order to generalize the results and make them more evident and less ambiguous. The health care field offers great opportunities since despite the recent awareness of the need to improve the decision-making process there are many opportunities to improve. Another big difference with the automotive industry is that the last improvements are not spread among all the actors. Therefore, in the future this research will focus more on the collaboration between academia and the health care sector.