Estudio del fenómeno Social Media en la pequeña empresa del sector TIC español

En un mundo en el que cada vez son más las personas que utilizan Internet para llevar a cabo sus comunicaciones y relaciones, tanto a nivel personal como profesional, las Redes Sociales se han convertido en una herramienta, para muchos imprescindible, de interacción social. A lo largo de este proyecto se realizará un análisis exhaustivo de las características del ya conocido como Fenómeno Social Media, para posteriormente centrar toda la atención en las ventajas y desventajas de dicha actividad en el ámbito empresarial. Dado que hasta el momento no se ha encontrado ningún otro estudio que trate el Fenómeno Social Media en la Pequeña Empresa del sector TIC español, el objetivo principal del proyecto se centra en conocer la influencia que las Redes Sociales están generando en la estrategia empresarial de dicho sector de empresas, cuyas características y particularidades hacen de ellas un modelo de negocio único y diferente y cuyo número se ha visto incrementado en los últimos años, debido quizás, a la situación de crisis que atraviesa el país. Para ello, se analizarán las ventajas e inconvenientes que se derivan de su uso, como afecta a la creación de valor, y, finalmente, cual es el nivel de implicación y/o inversión que la Pequeña Empresa ha adoptado al respecto. Dentro de este marco, se pretende realizar un énfasis especial en el concepto de cocreación de valor y sus variantes (Crowdsourcing, Open Innovation e Innovación Orientada por las Personas), que permita determinar el grado de importancia del usuario como generador de valor. Posteriormente, en la parte práctica, se llevará a cabo un amplio estudio de mercado, a partir de una encuesta online realizada a un conjunto de empresas, cuidadosamente seleccionadas de entre más de 100.000 compañías, según su sector de actividad, número de empleados y volumen de negocios anual, y cuyos resultados serán analizados con la intención de obtener una visión clara del comportamiento global de las empresas seleccionadas. Por último, tomaremos de referencia las dos últimas publicaciones anuales del “Observatorio sobre el uso de las Redes Sociales en las Pymes españolas” (2011 y 2013), estudios dedicados íntegramente a Redes Sociales y Pymes, y cuya información, junto con los resultados obtenidos de nuestro estudio, nos permitirán determinar la tendencia actual y futura, y en consecuencia, obtener las conclusiones oportunas que nos permitan dar respuesta a las cuestiones planteadas durante la realización del proyecto, y determinar si nos encontramos o no ante una verdadera fuente de éxito empresarial. ABSTRACT. In a world where more and more people are using the Internet to perform their communications and relationships, both personally and professionally, Social Networks have become a social interaction tool, indispensable for many people. Throughout this project we will perform a thorough analysis of the characteristics of the Social Media Phenomenon, focusing on the advantages and disadvantages of such activity in a business scope. Given that we have not found no study on the Social Media Phenomenon in Small Business of the Spanish ICT sector, the main objective of this project is to establish the influence that Social Networks are generating in the business strategy of this business sector, the characteristics and peculiarities that make them a unique and different business model and whose number has increased in recent years, perhaps due to the crisis the country is facing. To do this, we will discuss the advantages and disadvantages derived from its use, how it affects value creation, and finally, what is the level of involvement and / or investment that the Small Business has taken in this regard. In this context, we intend to make a special emphasis on the concept of value co-creation and its variants (Crowdsourcing, Open Innovation and People Oriented Innovation), to determine the degree of importance of the user to value generator. Subsequently, on the practical section, out a comprehensive market study will be carried, based on an online test to a group of enterprises, carefully selected from more than 100,000 companies, according to their sector of activity, number of employees and annual turnover, and the results will be analyzed with the intention to get a clear view of the selected company's overall performance. Finally, we will take as reference the last two annual publications of the "Observatory on the use of Social Networks in Spanish SMEs" (2011 and 2013), entirely dedicated to Social Media and SMEs studies, and whose information, together with the results obtained in our study will allow us to determine the current and future trends, and consequently, obtain the appropriate conclusions to respond to the raised questions throughout the project, and determine whether or not they are a real source of business success.

Innovation in consulting firms: an area to explore

Services are the most representative sector in developed economies due to their contribution to GDP and employment. Consulting firms are classified as part of the Knowledge Intensive Business Services (KIBS) and provide professional services to all types of organizations. Consulting firms usually innovate with their customers and suppliers in a nurturing environment for value co-creation. This environment is project-based, process-oriented and with intensive knowledge exchange among all stakeholders. Based on literature review, it has been found that despite the existence of frameworks for service innovation, none of them have specifically focused on consulting firms. Further implications on this issue are addressed for both academics and practitioners.

Co-creación de semiconductores

El mercado de los semiconductores está saturado de productos similares y de distribuidores con una propuesta de servicios similar. Los procesos de Co-Creación en los que el cliente colabora en la definición y desarrollo del producto y proporciona información sobre su utilidad, prestaciones y valor percibido, con el resultado de un producto que soluciona sus necesidades reales, se están convirtiendo en un paso adelante en la diferenciación y expansión de la cadena de valor. El proceso de diseño y fabricación de semiconductores es bastante complejo, requiere inversiones cada vez mayores y demanda soluciones completas. Se requiere un ecosistema que soporte el desarrollo de los equipos electrónicos basados en dichos semiconductores. La facilidad para el diálogo y compartir información que proporciona internet, las herramientas basadas en web 2.0 y los servicios y aplicaciones en la nube; favorecen la generación de ideas, el desarrollo y evaluación de productos y posibilita la interacción entre diversos co-creadores. Para iniciar un proceso de co-creación se requiere métodos y herramientas adecuados para interactuar con los participantes e intercambiar experiencias, procesos para integrar la co-creación dentro de la operativa de la empresa, y desarrollar una organización y cultura que soporten y fomenten dicho proceso. Entre los métodos más efectivos están la Netnografía que estudia las conversaciones de las comunidades en internet; colaboración con usuarios pioneros que van por delante del Mercado y esperan un gran beneficio de la satisfacción de sus necesidades o deseos; los estudios de innovación que permiten al usuario definir y a menudo crear su propia solución y la externalización a la multitud, que mediante una convocatoria abierta plantea a la comunidad retos a resolver a cambio de algún tipo de recompensa. La especialización de empresas subcontratistas en el desarrollo y fabricación de semiconductores; facilita la innovación abierta colaborando con diversas entidades en las diversas fases del desarrollo del semiconductor y su ecosistema. La co-creación se emplea actualmente en el sector de los semiconductores para detectar ideas de diseños y aplicaciones, a menudo mediante concursos de innovación. El servicio de soporte técnico y la evaluación de los semiconductores con frecuencia es fruto de la colaboración entre los miembros de la comunidad fomentada y soportada por los fabricantes del producto. Con el programa EBVchips se posibilita el acceso a empresas pequeñas y medianas a la co-creación de semiconductores con los fabricantes en un proceso coordinado y patrocinado por el distribuidor EBV. Los semiconductores configurables como las FPGAs constituyen otro ejemplo de co-creación mediante el cual el fabricante proporciona el circuito integrado y el entorno de desarrollo y los clientes crean el producto final definiendo sus características y funcionalidades. Este proceso se enriquece con bloques funcionales de diseño, IP-cores, que a menudo son creados por la comunidad de usuarios. ABSTRACT. The semiconductor market is saturated of similar products and distributors with a similar proposal for services. The processes of co-creation in which the customer collaborates in the definition and development of the product and provides information about its utility, performance and perceived value, resulting in a product that solves their real needs, are becoming a step forward in the differentiation and expansion of the value chain. The design and semiconductor manufacturing process is quite complex, requires increasingly higher investments and demands complete solutions. It requires an ecosystem that supports the development of electronic equipments based on such semiconductors. The ease of dialogue and sharing information that provides internet, web 2.0-based tools and services and applications in the cloud; favor the generation of ideas, the development and evaluation of products and allows the interaction between various co-creators. To start a process of co-creation adequate methods and tools are required to interact with the participants and exchange experiences, processes to integrate the co-creation within the operations of the company, and developing an organization and culture that support and promote such process. Among the most effective methods are the Netnography that studies the conversations of the communities on the internet; collaboration with Lead Users who are ahead of the market and expect a great benefit from the satisfaction of their needs or desires; Innovation studies that allow the user to define and often create their own solution and Crowdsourcing, an open call to the community to solve challenges in exchange for some kind of reward. The specialization of subcontractors in the development and manufacture of semiconductors; facilitates open innovation in the context of collaboration with different entities working in the different phases of the development of the semiconductor and its ecosystem. Co-creation is used currently in the semiconductor sector to detect ideas of designs and applications, often through innovation’s contests. Technical support and evaluation of semiconductors frequently is the result of collaboration between members of the community fostered and supported by the manufacturers of the product. The EBVchips program provides access to small and medium-sized companies to the co-creation of semiconductors with manufacturers in a process coordinated and sponsored by the Distributor EBV. Configurable semiconductors like FPGAs are another example of co-creation whereby the manufacturer provides the integrated circuit and the development environment and customers create the final product by defining their features and functionality. This process is enriched with IP-cores, designs blocks that are often created by the user community.

Contribution to flexible service coordination in mobile prosumer environments

Este trabajo de Tesis se desarrolla en el marco de los escenarios de ejecución distribuida de servicios móviles y contribuye a la definición y desarrollo del concepto de usuario prosumer. El usuario prosumer se caracteriza por utilizar su teléfono móvil para crear, proveer y ejecutar servicios. Este nuevo modelo de usuario contribuye al avance de la sociedad de la información, ya que el usuario prosumer se transforma de creador de contenidos a creador de servicios (estos últimos formados por contenidos y la lógica para acceder a ellos, procesarlos y representarlos). El objetivo general de este trabajo de Tesis es la provisión de un modelo de creación, distribución y ejecución de servicios para entorno móvil que permita a los usuarios no programadores (usuarios prosumer), pero expertos en un determinado dominio, crear y ejecutar sus propias aplicaciones y servicios. Para ello se definen, desarrollan e implementan metodologías, procesos, algoritmos y mecanismos adaptables a dominios específicos, para construir entornos de ejecución distribuida de servicios móviles para usuarios prosumer. La provisión de herramientas de creación adaptadas a usuarios no expertos es una tendencia actual que está siendo desarrollada en distintos trabajos de investigación. Sin embargo, no se ha propuesto una metodología de desarrollo de servicios que involucre al usuario prosumer en el proceso de diseño, desarrollo, implementación y validación de servicios. Este trabajo de Tesis realiza un estudio de las metodologías y tecnologías más innovadoras relacionadas con la co‐creación y utiliza este análisis para definir y validar una metodología que habilita al usuario para ser el responsable de la creación de servicios finales. Siendo los entornos móviles prosumer (mobile prosumer environments) una particularización de los entornos de ejecución distribuida de servicios móviles, en este trabajo se tesis se investiga en técnicas de adaptación, distribución, coordinación de servicios y acceso a recursos identificando como requisitos las problemáticas de este tipo de entornos y las características de los usuarios que participan en los mismos. Se contribuye a la adaptación de servicios definiendo un modelo de variabilidad que soporte la interdependencia entre las decisiones de personalización de los usuarios, incorporando mecanismos de guiado y detección de errores. La distribución de servicios se implementa utilizando técnicas de descomposición en árbol SPQR, cuantificando el impacto de separar cualquier servicio en distintos dominios. Considerando el plano de comunicaciones para la coordinación en la ejecución de servicios distribuidos hemos identificado varias problemáticas, como las pérdidas de enlace, conexiones, desconexiones y descubrimiento de participantes, que resolvemos utilizando técnicas de diseminación basadas en publicación subscripción y algoritmos Gossip. Para lograr una ejecución flexible de servicios distribuidos en entorno móvil, soportamos la adaptación a cambios en la disponibilidad de los recursos, proporcionando una infraestructura de comunicaciones para el acceso uniforme y eficiente a recursos. Se han realizado validaciones experimentales para evaluar la viabilidad de las soluciones propuestas, definiendo escenarios de aplicación relevantes (el nuevo universo inteligente, prosumerización de servicios en entornos hospitalarios y emergencias en la web de la cosas). Abstract This Thesis work is developed in the framework of distributed execution of mobile services and contributes to the definition and development of the concept of prosumer user. The prosumer user is characterized by using his mobile phone to create, provide and execute services. This new user model contributes to the advancement of the information society, as the prosumer is transformed from producer of content, to producer of services (consisting of content and logic to access them, process them and represent them). The overall goal of this Thesis work is to provide a model for creation, distribution and execution of services for the mobile environment that enables non‐programmers (prosumer users), but experts in a given domain, to create and execute their own applications and services. For this purpose I define, develop and implement methodologies, processes, algorithms and mechanisms, adapted to specific domains, to build distributed environments for the execution of mobile services for prosumer users. The provision of creation tools adapted to non‐expert users is a current trend that is being developed in different research works. However, it has not been proposed a service development methodology involving the prosumer user in the process of design, development, implementation and validation of services. This thesis work studies innovative methodologies and technologies related to the co‐creation and relies on this analysis to define and validate a methodological approach that enables the user to be responsible for creating final services. Being mobile prosumer environments a specific case of environments for distributed execution of mobile services, this Thesis work researches in service adaptation, distribution, coordination and resource access techniques, and identifies as requirements the challenges of such environments and characteristics of the participating users. I contribute to service adaptation by defining a variability model that supports the dependency of user personalization decisions, incorporating guiding and error detection mechanisms. Service distribution is implemented by using decomposition techniques based on SPQR trees, quantifying the impact of separating any service in different domains. Considering the communication level for the coordination of distributed service executions I have identified several problems, such as link losses, connections, disconnections and discovery of participants, which I solve using dissemination techniques based on publish‐subscribe communication models and Gossip algorithms. To achieve a flexible distributed service execution in mobile environments, I support adaptation to changes in the availability of resources, while providing a communication infrastructure for the uniform and efficient access to resources. Experimental validations have been conducted to assess the feasibility of the proposed solutions, defining relevant application scenarios (the new intelligent universe, service prosumerization in hospitals and emergency situations in the web of things).

Introducción de las plataformas tecnológicas 2.0 y la innovación abierta en la estrategia empresarial: estudio del sector de componentes electrónicos

Este proyecto se encuadra dentro de los estudios de impacto que están produciendo en las empresas el desarrollo e incorporación de las nuevas tecnologías, y más concretamente la implantación de las aplicaciones provenientes de la denominada web 2.0. Se conoce con este nombre a las herramientas web que permiten una comunicación bidireccional, es decir, el usuario y la empresa pueden intercambiar opiniones, de manera que el usuario adquiere un nuevo papel más protagonista, presentando ideas, aclaraciones, gustos, críticas...que son tenidas en cuenta por la empresa para realizar su actividad. De esta manera se ha roto con el modelo anterior donde el usuario solo podía consultar la información de una página web, era simple receptor de la información. El objetivo de este estudio es conocer cómo las empresas están incorporando estas tecnologías 2.0 a su estrategia empresarial, y cómo términos como innovación abierta o co-creación están tomando mayor importancia en el entorno empresarial gracias a estas nuevas tecnologías. Si bien existen estudios a nivel de consultoría que generalmente aportan información sobre cuáles son las plataformas 2.0 más utilizadas en el mundo empresarial, no se han encontrado hasta ahora estudios que vinculen estas plataformas entre ellas y con la estructura empresarial, para poder definir un perfil de la organización que trabaja con ellas o el nivel de madurez de la incorporación de estas tecnologías en las organizaciones. Analizar cualitativamente estos aspectos, significa estudiar los nuevos conceptos incorporados a las tecnologías 2.0 en la empresa. Un análisis cuantitativo nos llevaría a estudiar de manera práctica que tipo de recursos y en qué cantidad se están utilizando y su vinculación con la estructura de la organización. Para ello: En una primera parte, nos centraremos en las diferentes formas en las que se puede acceder a Internet, y a continuación enfocaremos el estudio en los dispositivos móviles que nos permiten la conexión desde cualquier lugar y en cualquier instante. Con esto conseguiremos tener una situación actual del mercado de las TIC y veremos cómo las empresas han ido construyendo nuevas políticas para cambiar su estrategia con el fin de estar presentes en los nuevos dispositivos móviles y no perder cuota de mercado. Tras ello, veremos porqué conceptos como el de innovación abierta y proceso de co-creación han sido posibles gracias a la implantación de las tecnologías 2.0 en el ámbito empresarial, facilitando que la empresa y el usuario final cooperen y vayan de la mano en una misma dirección; la empresa se surte de las aportaciones que los usuarios ofrecen, y por otra parte el usuario se siente valorado por la empresa para conseguir la meta final. Es aquí donde comprobaremos la transformación que ha sufrido la empresa en sus distintos sectores departamentales (marketing, ventas, recursos humanos y atención al cliente) como consecuencia de la incorporación de las herramientas 2.0 al mundo laboral. Por todo ello, se enumerarán los distintos usos que realizan las empresas de las redes social más habituales, y además se describirán las principales herramientas y/o aplicaciones para monitorizar las redes sociales que servirán a la empresa para hacer un seguimiento de las mismas. La segunda parte del proyecto será un caso práctico y servirá para ofrecer una visión más real del estado actual de las empresas y su relación con las redes sociales. Para la recopilación de los datos se han escogido las empresas que pertenecen al sector de la “Fabricación de productos informáticos, electrónicos y ópticos”. En cuento a las redes sociales elegidas, han sido Facebook y Twitter. Este estudio práctico nos hará entender mejor el impacto directo que tienen las redes sociales en la actividad diaria de las empresas. Finalmente se realizarán una serie de consideraciones a modo de directrices que servirán para tratar de entender cómo se están utilizando las redes sociales en el entorno empresarial y cuál puede ser la manera más óptima de utilizarlas según el estudio presentado. ABSTRACT. This project is part of the impact studies arisen in companies by the development and incorporation of new technologies and, specifically, by the implementation of applications from the so-called web 2.0. That is how we call the web tools that allow bidirectional communication, this is, user and company can exchange opinions, in such a way that users acquire a leading role, submitting ideas, explanations, preferences, criticism... considered by the company when performing its activities. This way, we have broken with the previous model, where users could only check information from a web page and were simple information recipients. The objective of this study is to get to know how companies are incorporating these technologies 2.0 to their business strategy and how terms such as open innovation or co-creation are becoming more important in the business sphere thanks to these new technologies. Even if there are consulting studies that generally provide information about which are the platforms 2.0 more used in the business world, no studies have been found until now that link such platforms among them and with the business structure, in order to define a profile of the organization that works with them or the level of development of the incorporation of these technologies in the organizations. A qualitative analysis of these aspects involves studying the new concepts incorporated to technologies 2.0 by companies. A qualitative analysis would lead us to study in a practical manner what kind of resources and what amount are being used and their relation with the organization structure. Therefore: First, we will focus on the different ways to gain access to the Internet and, afterwards, we will focus the study on mobile devices that allow us to be connected everywhere any time. This way, we will manage to obtain a present situation of the ICT market and we will see how companies have constructed new policies to change their strategy in order to be present in the new mobile devices without losing their market share. Later, we will review why concepts such as open innovation and co-creation process have been possible thanks to the implementation of technologies 2.0 in the business environment, facilitating that companies and final users cooperate and walk hand in hand in the same direction; companies stock up on the contributions offered by users and, on the other hand, users feel appreciated by companies in the achievement of the final goal. Here we will confirm the transformation suffering by companies in different department sectors (marketing, sales, human resources and customer service) as a result of the incorporation of tools 2.0 to the work environment. Therefore, we will enumerate the different uses that companies make of the most common social networks, describing the main tools and/or applications to monitor social networks used by companies to follow them up. The second part of the project will be a case study to offer a more real vision of the present status of companies and their relation with social networks. To collect the data, we have selected companies from the “Manufacture of computer, electronic and optical products” industry. The social networks chosen are Facebook and Twitter. This case study will help us to get a better understanding of the direct impact of social networks in companies’ daily activity. Finally, we will offer a series of considerations and guidelines to try to understand how are social networks being used in the business environment and what can be the most suitable manner to use them according to this study.

Understanding the main drivers of value creation in an open innovation program

Innovation has been identified as the single most relevant element in fuelling corporations’ competitive advantage and ultimate value creation. Corporations no longer rely on a single, linear structure of innovation; the new paradigm of open innovation opens up new possibilities of organizing innovation within the ecosystem, thus giving rise to new drivers for value creation. These value drivers have an impact on the strategic position of the firm and have the ability to create superior financial performance. In this paper we explore the close relationship between open innovation and value creation and propose a framework to analyze this process as well as the most critical elements involved.

A bi-cubic transformation for the numerical evaluation of the Cauchy principal value integrals in boundary methods

The numerical strategies employed in the evaluation of singular integrals existing in the Cauchy principal value (CPV) sense are, undoubtedly, one of the key aspects which remarkably affect the performance and accuracy of the boundary element method (BEM). Thus, a new procedure, based upon a bi-cubic co-ordinate transformation and oriented towards the numerical evaluation of both the CPV integrals and some others which contain different types of singularity is developed. Both the ideas and some details involved in the proposed formulae are presented, obtaining rather simple and-attractive expressions for the numerical quadrature which are also easily embodied into existing BEM codes. Some illustrative examples which assess the stability and accuracy of the new formulae are included.

NEMAWASHI: Attaining Value Stream alignment within Complex Organizational Networks

In the process of value creation, organizations perform an intense intra-organizational dialog through which internal VS alignment is achieved towards certain strategic objectives. Within the context of complex organizational networks, were goal conflicts are preprogrammed through incentive structures, VS alignment as legitimation of action towards strategic goals has special interest. On the one hand it facilitates the access to necessary resources for goal achievement and on the other it increases the sustainability and supports commonly agreed upon decisions leading to success. This paper provides a winnerless process (WLP) differential equations model for quantifying intra-organizational value stream (VS) alignment dynamics that can help design sustainable lean management solutions. This paper presents ongoing research results that show how the model was implemented in one industrial facility.

Co-simulation Methodologies for Hybrid and Electric Vehicle Dynamics

In recent decades, full electric and hybrid electric vehicles have emerged as an alternative to conventional cars due to a range of factors, including environmental and economic aspects. These vehicles are the result of considerable efforts to seek ways of reducing the use of fossil fuel for vehicle propulsion. Sophisticated technologies such as hybrid and electric powertrains require careful study and optimization. Mathematical models play a key role at this point. Currently, many advanced mathematical analysis tools, as well as computer applications have been built for vehicle simulation purposes. Given the great interest of hybrid and electric powertrains, along with the increasing importance of reliable computer-based models, the author decided to integrate both aspects in the research purpose of this work. Furthermore, this is one of the first final degree projects held at the ETSII (Higher Technical School of Industrial Engineers) that covers the study of hybrid and electric propulsion systems. The present project is based on MBS3D 2.0, a specialized software for the dynamic simulation of multibody systems developed at the UPM Institute of Automobile Research (INSIA). Automobiles are a clear example of complex multibody systems, which are present in nearly every field of engineering. The work presented here benefits from the availability of MBS3D software. This program has proven to be a very efficient tool, with a highly developed underlying mathematical formulation. On this basis, the focus of this project is the extension of MBS3D features in order to be able to perform dynamic simulations of hybrid and electric vehicle models. This requires the joint simulation of the mechanical model of the vehicle, together with the model of the hybrid or electric powertrain. These sub-models belong to completely different physical domains. In fact the powertrain consists of energy storage systems, electrical machines and power electronics, connected to purely mechanical components (wheels, suspension, transmission, clutch…). The challenge today is to create a global vehicle model that is valid for computer simulation. Therefore, the main goal of this project is to apply co-simulation methodologies to a comprehensive model of an electric vehicle, where sub-models from different areas of engineering are coupled. The created electric vehicle (EV) model consists of a separately excited DC electric motor, a Li-ion battery pack, a DC/DC chopper converter and a multibody vehicle model. Co-simulation techniques allow car designers to simulate complex vehicle architectures and behaviors, which are usually difficult to implement in a real environment due to safety and/or economic reasons. In addition, multi-domain computational models help to detect the effects of different driving patterns and parameters and improve the models in a fast and effective way. Automotive designers can greatly benefit from a multidisciplinary approach of new hybrid and electric vehicles. In this case, the global electric vehicle model includes an electrical subsystem and a mechanical subsystem. The electrical subsystem consists of three basic components: electric motor, battery pack and power converter. A modular representation is used for building the dynamic model of the vehicle drivetrain. This means that every component of the drivetrain (submodule) is modeled separately and has its own general dynamic model, with clearly defined inputs and outputs. Then, all the particular submodules are assembled according to the drivetrain configuration and, in this way, the power flow across the components is completely determined. Dynamic models of electrical components are often based on equivalent circuits, where Kirchhoff’s voltage and current laws are applied to draw the algebraic and differential equations. Here, Randles circuit is used for dynamic modeling of the battery and the electric motor is modeled through the analysis of the equivalent circuit of a separately excited DC motor, where the power converter is included. The mechanical subsystem is defined by MBS3D equations. These equations consider the position, velocity and acceleration of all the bodies comprising the vehicle multibody system. MBS3D 2.0 is entirely written in MATLAB and the structure of the program has been thoroughly studied and understood by the author. MBS3D software is adapted according to the requirements of the applied co-simulation method. Some of the core functions are modified, such as integrator and graphics, and several auxiliary functions are added in order to compute the mathematical model of the electrical components. By coupling and co-simulating both subsystems, it is possible to evaluate the dynamic interaction among all the components of the drivetrain. ‘Tight-coupling’ method is used to cosimulate the sub-models. This approach integrates all subsystems simultaneously and the results of the integration are exchanged by function-call. This means that the integration is done jointly for the mechanical and the electrical subsystem, under a single integrator and then, the speed of integration is determined by the slower subsystem. Simulations are then used to show the performance of the developed EV model. However, this project focuses more on the validation of the computational and mathematical tool for electric and hybrid vehicle simulation. For this purpose, a detailed study and comparison of different integrators within the MATLAB environment is done. Consequently, the main efforts are directed towards the implementation of co-simulation techniques in MBS3D software. In this regard, it is not intended to create an extremely precise EV model in terms of real vehicle performance, although an acceptable level of accuracy is achieved. The gap between the EV model and the real system is filled, in a way, by introducing the gas and brake pedals input, which reflects the actual driver behavior. This input is included directly in the differential equations of the model, and determines the amount of current provided to the electric motor. For a separately excited DC motor, the rotor current is proportional to the traction torque delivered to the car wheels. Therefore, as it occurs in the case of real vehicle models, the propulsion torque in the mathematical model is controlled through acceleration and brake pedal commands. The designed transmission system also includes a reduction gear that adapts the torque coming for the motor drive and transfers it. The main contribution of this project is, therefore, the implementation of a new calculation path for the wheel torques, based on performance characteristics and outputs of the electric powertrain model. Originally, the wheel traction and braking torques were input to MBS3D through a vector directly computed by the user in a MATLAB script. Now, they are calculated as a function of the motor current which, in turn, depends on the current provided by the battery pack across the DC/DC chopper converter. The motor and battery currents and voltages are the solutions of the electrical ODE (Ordinary Differential Equation) system coupled to the multibody system. Simultaneously, the outputs of MBS3D model are the position, velocity and acceleration of the vehicle at all times. The motor shaft speed is computed from the output vehicle speed considering the wheel radius, the gear reduction ratio and the transmission efficiency. This motor shaft speed, somehow available from MBS3D model, is then introduced in the differential equations corresponding to the electrical subsystem. In this way, MBS3D and the electrical powertrain model are interconnected and both subsystems exchange values resulting as expected with tight-coupling approach.When programming mathematical models of complex systems, code optimization is a key step in the process. A way to improve the overall performance of the integration, making use of C/C++ as an alternative programming language, is described and implemented. Although this entails a higher computational burden, it leads to important advantages regarding cosimulation speed and stability. In order to do this, it is necessary to integrate MATLAB with another integrated development environment (IDE), where C/C++ code can be generated and executed. In this project, C/C++ files are programmed in Microsoft Visual Studio and the interface between both IDEs is created by building C/C++ MEX file functions. These programs contain functions or subroutines that can be dynamically linked and executed from MATLAB. This process achieves reductions in simulation time up to two orders of magnitude. The tests performed with different integrators, also reveal the stiff character of the differential equations corresponding to the electrical subsystem, and allow the improvement of the cosimulation process. When varying the parameters of the integration and/or the initial conditions of the problem, the solutions of the system of equations show better dynamic response and stability, depending on the integrator used. Several integrators, with variable and non-variable step-size, and for stiff and non-stiff problems are applied to the coupled ODE system. Then, the results are analyzed, compared and discussed. From all the above, the project can be divided into four main parts: 1. Creation of the equation-based electric vehicle model; 2. Programming, simulation and adjustment of the electric vehicle model; 3. Application of co-simulation methodologies to MBS3D and the electric powertrain subsystem; and 4. Code optimization and study of different integrators. Additionally, in order to deeply understand the context of the project, the first chapters include an introduction to basic vehicle dynamics, current classification of hybrid and electric vehicles and an explanation of the involved technologies such as brake energy regeneration, electric and non-electric propulsion systems for EVs and HEVs (hybrid electric vehicles) and their control strategies. Later, the problem of dynamic modeling of hybrid and electric vehicles is discussed. The integrated development environment and the simulation tool are also briefly described. The core chapters include an explanation of the major co-simulation methodologies and how they have been programmed and applied to the electric powertrain model together with the multibody system dynamic model. Finally, the last chapters summarize the main results and conclusions of the project and propose further research topics. In conclusion, co-simulation methodologies are applicable within the integrated development environments MATLAB and Visual Studio, and the simulation tool MBS3D 2.0, where equation-based models of multidisciplinary subsystems, consisting of mechanical and electrical components, are coupled and integrated in a very efficient way.

Business, development and inclusive supply chains. Exploring pathways for the sustainable incorporation of the poor as suppliers in agrifood supply chains

El panorama global está cambiando, y esto influye sobre la forma en la que entendemos y tratamos de alcanzar un desarrollo humano sostenible. El crecimiento de la población conlleva una mayor presión sobre los recursos, pero también supone una mayor cantidad de mano de obra y de talento; la concentración en áreas urbanas está cambiando las dinámicas sociales y desafiando los canales de comercialización tradicionales, pero también genera nuevos mercados y fomenta la innovación; los cambios en la economía global están reduciendo los tradicionales desequilibrios de poder entre los países occidentales y el resto del mundo; y las crecientes interconexiones crean nuevos riesgos pero también oportunidades para lanzar iniciativas de alcance global. Todas estas tendencias nos están obligando a repensar qué es el desarrollo humano y de qué manera deberíamos afrontar el reto de la pobreza. Es comúnmente aceptado que la globalización implica interdependencia y que, para conseguir un desarrollo humano sostenible, la colaboración entre actores de distintos ámbitos es necesaria. Se observa una creciente convergencia de temas, intereses y soluciones en torno al desarrollo sostenible, incluso en diferentes países y sectores, lo que está facilitando la colaboración estratégica entre empresas, gobiernos y sociedad civil. Existen pocas duda a día de hoy sobre el papel fundamental que las empresas deben desempeñar en la transición mundial hacia la sostenibilidad ambiental y la erradicación de la pobreza. Las empresas están evolucionando desde un enfoque tradicional centrado en la maximización de beneficios económicos hacia un enfoque holístico que integra la sostenibilidad y la responsabilidad social como parte del núcleo de negocio de las compañías. En el ámbito medioambiental, muchas empresas ya han comenzado a actuar y tratan de reducir sus emisiones, sus desechos y su consumo de energía. Sin embargo la contribución de las empresas a la reducción de la pobreza no está tan clara. Actualmente en torno a 1,2 miles de millones de personas viven en situación de extrema pobreza. La mayoría de estas personas aún vive en zonas rurales donde la mayor parte de la población activa trabaja en el sector agrícola. Por lo tanto, mejorar las oportunidades y reducir los riesgos de los productores más vulnerables en el sector de la agricultura puede ser un motor de desarrollo rural y reducción de la pobreza, especialmente en países de bajo nivel de desarrollo cuyas economías están fundamentalmente basadas en la agricultura. Algunas empresas comienzan a incluir a los pobres en sus operaciones como consumidores, proveedores y emprendedores. Esta tesis se centra en las potenciales oportunidades relacionadas con la incorporación sostenible de los pobres como proveedores de productos y/o de mano de obra. La colaboración entre empresas y productores vulnerables de países en desarrollo es un tema relativamente nuevo y todavía poco estudiado. La pregunta que guía esta tesis es: “¿Cómo pueden las empresas facilitar la inclusión sostenible en cadenas de suministro de productores vulnerables de los países menos desarrollados?”. Para responder a la pregunta anterior, la autora ha aplicado una metodología de casos de estudio. Esta metodología se considera apropiada porque la investigación sobre cadenas de suministro inclusivas es todavía escasa y porque es necesario entender en profundidad un fenómeno de la vida real, y para ello es fundamental conocer su contexto. En primer lugar, se realiza una revisión de literatura para identificar las proposiciones y los constructos teóricos que guiarán la posterior recogida de datos. La revisión de literatura se divide en dos partes: una más general que explora la dimensión social de la sostenibilidad en cadenas de suministro, y una más específica que se centra en la incorporación de los pobres como proveedores en cadenas de suministro. A lo largo de la última década, ha habido un crecimiento exponencial de los estudios académicos sobre la sostenibilidad de las cadenas de suministro, pero la mayoría de los esfuerzos se han dirigido hacia la dimensión medioambiental de la sostenibilidad. Por lo tanto la revisión de literatura, que se presenta en la Sección 3.1 (página 35) y que profundiza en la sostenibilidad social de las cadenas de suministro, puede considerarse una contribución en sí misma. Esta revisión de literatura revela que la investigación sobre aspectos sociales en cadenas de suministro está cobrando impulso en distintas áreas de conocimiento, principalmente en los ámbitos de investigación sobre “gestión de cadenas de suministro”, “responsabilidad social corporativa” y “estudios del desarrollo”. La investigación existente sobre sostenibilidad social de cadenas de suministro se centra en tres temas: aclarar la definición de sostenibilidad social; analizar la implementación de estrategias de sostenibilidad social en cadenas de suministro; y estudiar el apoyo de las em presas líderes a proveedores vulnerables para facilitar su transición hacia la sostenibilidad. Un marco conceptual que resume los principales hallazgos de esta primera parte de la revisión de literatura es planteado en la Figura 7 (página 48). No obstante, en el área de investigación que está emergiendo en torno a la sostenibilidad social de las cadenas de suministro, los estudios relacionados con la reducción de la pobreza son aún escasos. Además se aprecia una falta de contribuciones desde y sobre los países menos desarrollados, así como una clara tendencia a reflejar la visión de las empresas líderes de las cadenas de suministro, olvidando la perspectiva de los proveedores. La segunda parte de la revisión de literatura presentada en la Sección 3.2 (página 51) profundiza en tres líneas de investigación que exploran, desde distintas perspectivas, la inclusión de los pobres en cadenas de suministro. Estas líneas son “Global Value Chains” (GVC), “Base of the Pyramid” (BoP) y “Sustainable Supply Chain Management” (SSCM). La investigación en GVC analiza las cadenas de suministro desde la perspectiva de la globalización económica y el comercio internacional, poniendo especial énfasis en las implicaciones para los países en desarrollo y las comunidades vulnerables. GVC caracteriza las cadenas de suministro según la forma en la que son gobernadas, las oportunidades de mejora que existen para los productores que forman parte de la cadena y el grado de inclusión o exclusión de las comunidades más pobres y vulnerables. La investigación en BoP explora las relaciones comerciales entre empresas y comunidades pobres. La premisa fundamental del concepto BoP es la posibilidad de combinar la generación de beneficios con la reducción de la pobreza. La propuesta original es que mediante la venta de productos y servicios a las comunidades pobres de países en desarrollo, la pobreza puede ser reducida al tiempo que las empresas incrementan sus beneficios, especialmente las grandes empresas multinacionales. Esta idea ha ido evolucionando y, a día de hoy, los investigadores BoP consideran la incorporación de los pobres no sólo como consumidores sino también como empleados, proveedores y co-creadores. La investigación en SSCM ha estado fundamentalmente orientada al estudio de la dimensión medioambiental de la sostenibilidad de cadenas de suministro. Sin embargo, la creciente externalización de la producción a países en desarrollo y las demandas de los grupos de interés para que las empresas aborden todos los aspectos de la sostenibilidad han llevado a los académicos de SSCM a reconocer la importancia de integrar asuntos relacionados con la reducción de la pobreza en sus investigaciones. Algunos estudios comienzan a apuntar los principales retos a los que se enfrentan las empresas para colaborar con productores vulnerables en sus cadenas de suministro. Estos retos son: falta de comunicación, altos costes de transacción y el incremento de la complejidad de las operaciones. Las contribuciones de estas tres líneas de investigación son complementarias para el estudio de las cadenas de suministro inclusivas. Sin embargo, raramente han sido consideradas conjuntamente, ya que pertenecen a ámbitos de conocimiento distintos. Esta tesis integra las aportaciones de GVC, BoP y SSCM en un marco conceptual para la creación y gestión de cadenas de suministro inclusivas. Este marco conceptual para cadenas de suministro inclusivas queda representado en la Figura 9 (página 68). El marco conceptual refleja las motivaciones que llevan a las empresas a colaborar con productores vulnerables, los retos a los que se enfrentan al hacerlo, y los caminos o estrategias que están siguiendo para construir y operar cadenas de suministro inclusivas de manera que sean beneficiosas tanto para la empresa como para los productores vulnerables. A fin de validar y refinar el marco conceptual propuesto, tres casos de estudio se llevan a cabo. Las cadenas de suministro analizadas por los casos de estudio pertenecen al sector agrícola y sus principales proveedores se encuentran en países de África subsahariana. Múltiples métodos de recolección de datos y triangulación son utilizados para mejorar la fiabilidad de los datos. La autora desarrolló trabajos de campo en Senegal, Etiopía y Tanzania. Estos viajes permitieron enriquecer el proceso de recogida de información mediante entrevistas semiestructuradas y conversaciones informales con los principales actores de la cadena de suministro y mediante la observación directa de los procesos y las interacciones entre productores vulnerables y empresas. El Caso de estudio A (Sección 5.1 en página 96) es un caso de estudio único. Analiza la cadena de suministro local de verduras en Senegal. La organización focal es Manobi, una empresa senegalesa que provee servicios de bajo coste a emprendedores locales del sector agrícola. El Caso de estudio A proporciona un interesante análisis del funcionamiento de una cadena de suministro local en un país en desarrollo y muestra como la provisión de servicios profesionales puede mejorar el desempeño de productores vulnerables. El Caso de estudio B (Sección 5.2 en página 122) es un caso de estudio único. Analiza la cadena de suministro global de flor cortada con origen en Etiopía. La organización focal es EHPEA, la Asociación Etíope de Productores y Exportadores Hortícolas, cuya misión es promover y salvaguardar la posición competitiva del sector agrícola etíope en el mercado global. El Caso de estudio B ayuda a comprender mejor la perspectiva de los proveedores respecto a los requerimiento de sostenibilidad del mercado global. También muestra cómo la inclusión de los productores en el proceso de desarrollo de un estándar privado facilita su implementación posterior. El Caso de estudio C (Sección 5.3 en página 143) es un caso de estudio múltiple. Analiza la cadena de suministro global de café especial con origen en Tanzania. Las organizaciones focales son comerciantes que conectan de manera directa a pequeños agricultores de café en países en desarrollo con empresas tostadoras de café en países desarrollados. El Caso de estudio C muestra cómo un pequeño agricultor puede proveer un producto “premium” al mercado global, y participar en un segmento diferenciado del mercado a través de una cadena de suministro transparente y eficiente. Las aportaciones empíricas de los casos de estudio ayudan a validar y mejorar el marco conceptual sobre cadenas de suministro inclusivas (ver discusión en el Capítulo 6 en página 170). El resultado es la propuesta de una nueva versión del marco conceptual representado en la Figura 40 (página 195). Los casos de estudio también proporcionan interesantes aportaciones en relación a la gestión de cadenas de suministro inclusivas y muestran las perspectivas de distintos actores implicados. Esta tesis arroja luz sobre el papel de las empresas en la creación y la gestión de cadenas de suministro inclusivas llevando a cabo una revisión de literatura multidisciplinar y analizando tres casos de estudio en países africanos. Como resultado, esta tesis presenta una serie de contribuciones empíricas y teóricas al ámbito de investigación emergente en torno a las cadenas de suministro inclusivas (Capítulo 7). Esta tesis también pretende ser útil a profesionales que deseen facilitar la incorporación de los pobres como proveedores en condiciones justas y beneficiosas. ABSTRACT The global outlook is changing, and this is influencing the way we understand and try to achieve sustainable human development. Population growth entails increasing pressure over resources, but it also provides greater workforce and talent; concentration in urban areas is changing social dynamics and challenging traditional marketing channels, but also creating news markets and driving innovation; the global economy shift is rebalancing the traditional power imbalance between Western countries and the rest of the world, making new opportunities to arise; and interconnections and global interdependence create new risks but also opportunities for launching initiatives with a global reach. All these trends are impelling us to rethink what development is and in which way poverty alleviation should be approached. It is generally agreed that globalization implies interdependence and, in order to achieve sustainable human development, collaboration of all actors is needed. A convergence of issues, interests and solutions related to sustainable development is being observed across countries and sectors, encouraging strategic collaboration among companies, governments and civil society. There is little doubt nowadays about the crucial role of the private sector in the world’s path towards environmental sustainability and poverty alleviation. Businesses are evolving from a “business as usual” stance to a more sustainable and responsible approach. In the environmental arena, many companies have already “walk the talk”, implementing environmental management systems and trying to reduce emissions and energy consumption. However, regarding poverty alleviation, their contribution is less clear. There are around 1.2 billion people living in extreme poverty. Most of this people still live in rural areas where the agricultural sector employs a big part of the active population. Therefore, improving opportunities and reducing risks for vulnerable producers in the agri-food sector can be a primary engine of rural development and poverty alleviation, particularly in the poor, agriculture-based economies of least developed countries. Some companies are beginning to include the poor into their operations as consumers, suppliers and entrepreneurs. This thesis focuses specifically on the potential opportunities related to the sustainable incorporation of the poor as suppliers of products and/or labor. Business collaboration with vulnerable producers in developing countries is a relatively new trend and it is still understudied. The overall question guiding this thesis is: “How can businesses facilitate the sustainable inclusion of vulnerable producers from least developed countries into supply chains?”. In order to answer the research question, the author has applied a case study research strategy. This methodology is considered appropriate because research about inclusive supply chains is still at an early stage, and because there is a need to understand a real-life phenomenon in depth, but such understanding encompasses important contextual conditions. First, a literature review is conducted, in order to identify the research propositions and theoretical constructs that will guide the data collection. The literature review is divided in two parts: a more general one that explores the social dimension of sustainability of supply chains, and a more specific one that focuses on the incorporation of the poor as suppliers in supply chains. During the last decade, there has been an exponential growth of studies in the field of supply chain sustainability, but research efforts have traditionally been directed towards the analysis of the environmental dimension. Therefore, the literature review presented in Section 3.1 (page 35) that delves into social sustainability of supply chains can be considered a contribution in itself. This literature review reveals that the investigation of social issues in supply chains is gaining momentum and comes from different academic disciplines, namely Supply Chain Management, Corporate Social Responsibility and Development Studies. Existing research about social sustainability of supply chains focuses on three issues: clarify the definition of social sustainability; analyze the implementation of social sustainability strategies in supply chains; and study lead companies’ support to vulnerable suppliers in their transition towards sustainability. A conceptual framework that outlines the main findings that emerge from this first part of literature review is proposed in Figure 7 (page 48). Nevertheless, in this nascent field of social sustainability of supply chains, studies related to poverty alleviation are still scarce. Moreover, a lack of contributions from and about least developed countries has been observed, as well as a tendency to reflect on the lead firms’ standpoint, neglecting the suppliers’ perspective. The second part of the literature review (Section 3.2 in page 51) delves into three research streams that are exploring the inclusion of the poor into supply chains from different viewpoints. These research streams are Global Value Chains (GVC), Base of the Pyramid (BoP) and Sustainable Supply Chain Management (SSCM). GVC research discusses the dynamics of economic globalization and international trade, putting special emphasis in the implications for developing countries and vulnerable communities. GVC characterizes supply chains by the way they are governed, the upgrading opportunities that exist for producers in the chain and the degree of inclusion or exclusion of impoverished communities. BoP research explores trading relationships between businesses and impoverished communities. The core premise of the BoP concept is the possibility to combine profits with poverty alleviation. The original BoP proposition is that by marketing innovative products and services to poor communities in developing countries, poverty would be reduced and companies would increase their benefits, especially multinational companies. This idea has evolved to consider the incorporation of the poor to business activities not only as consumers, but also as employees, entrepreneurs and co-creators. The SSCM school of thought has mainly focused on studying the environmental dimension of supply chain sustainability, neglecting the consideration of the social perspective. However, in recent years, increasing outsourcing of production to developing countries and stakeholders’ demands for a more holistic approach to business sustainability have led SSCM scholars to acknowledge the importance of integrating poverty concerns in this field’s research agenda. Some SSCM studies identify the main operational challenges for companies which engage with vulnerable suppliers in their supply chains: missing communication, higher transactional and operational costs and increased complexity. Contributions from these three research streams are complementary for the study of inclusive supply chains. However, they have been rarely considered together, since they belong to different research areas. This thesis seeks to play a dovetailing role in this scenario by proposing a conceptual framework for creating and operating inclusive supply chains that builds on contributions from GVC, SSCM and BoP research. This framework for inclusive supply chains is depicted in Figure 9 (page 68), and explains the motivations that drive businesses to collaborate with vulnerable suppliers, the chal lenges they face in doing so, and the pathways they are following in order to build and operate inclusive supply chains profitably for both buying companies and vulnerable suppliers. In order to validate and refine the proposed framework, three case studies are carried out. The supply chains analyzed by the case studies belong to the agri-food sector and source from Sub-Saharan African countries. Multiple data collection methods and triangulation are used in order to improve reliability of findings. The author carried out field work in Senegal, Ethiopia and Tanzania. These travels enriched the data collection process, providing semi-structured interviews and informal conversations with the main actors in the supply chains, as well as direct observation of processes and interactions among companies and vulnerable suppliers. Case study A (Section 5.1 in page 96) is a single case study. It analyzes a local supply chain in Senegal providing vegetables to the local market. The focal organization is Manobi, a Senegalese inclusive business which provides affordable ICT services to local entrepreneurs in the agri-food sector. Case study A provides interesting insights into the dynamics of local supply chains and how professional services can help to improve their performance. Case study B (Section 5.2 in page 122) is a single case study. It analyzes a global supply chain with origin in Ethiopia providing cut flowers to the global commodity market. The focal organization is EHPEA, Ethiopian Horticulture Producers and Exporters Association, whose mission is to promote and safeguard the competitive position of the Ethiopian horticulture sector within the global market. Case study B helps to better understand the suppliers’ perspective regarding global market sustainability requirements and shows how the inclusion of suppliers in the process of development of a private standard has a positive impact in its implementation. Case study C (Section 5.3 in page 143) is a multiple case study. It analyzes a global supply chain with origin in Tanzania providing coffee to the global niche market of specialty coffee. The focal organizations are traders who are directly connecting smallholder coffee farmers in developing countries to coffee roasters in developed countries. Case study C shows how smallholder farmers can supply a premium product and be incorporated in a differentiated market segment through a transparent and efficient supply chain. The empirical findings from the case studies help to validate and refine the conceptual framework (see discussion in Chapter 6). The proposal of a new version of the conceptual framework is depicted in Figure 40 (page 195). The case studies also provide interesting insights related to the management of inclusive supply chains and show the perspectives of the different actors involved. This thesis sheds some light on the role of businesses in the creation and operation of inclusive supply chains by carrying out a cross-disciplinary literature review and analyzing three case studies in African countries. In doing so, this thesis presents a series of theoretical and empirical contributions to the emerging academic field of inclusive supply chains (Chapter 7). This thesis also intends to be useful to practitioners willing to improve the incorporation of the poor as suppliers in fair and profitable conditions.