Teaching automatic control in non-specialist engineering schools

Automatic Control Teaching in the new degree syllabus has reduced both, its contents and its implementation course, with regard to traditional engineering careers. On the other hand, where the qualification is not considered as automatic control specialist, it is required an adapted methodology to provide the minimum contents that the student needs to assimilate, even in the case that students do not perceive these contents as the most important in their future career. In this paper we present the contents of a small automatic course taught Naval Architecture and Marine Engineering Degrees at the School of Naval Engineering of the Polytechnic University of Madrid. We have included the contents covered using the proposed methodology which is based on practical work after lectures. Firstly, the students performed exercises by hand. Secondly, they solve the exercises using informatics support tools, and finally, they validate their previous results and their knowledge in the laboratory platforms.

Preface. The Language of Architecture and Civil Engineering

Preface

La aportación de la Península Ibérica a la tecnología naval analizada a través de la interpretación de los documentos y la reproducción de los buques descritos en ellos (1570-1620)

El período de la Historia comprendido entre 1570 y 1620 nos ha dejado un importante conjunto de documentos relacionados con la construcción naval en la Península Ibérica. En una época convulsa en la que los reinos de España y Portugal se aglutinaron bajo una misma Corona, surgen una serie de manuscritos, libros y leyes que reflejan la creciente preocupación de la sociedad por el tema naval. Entre sus páginas encontramos las descripciones del proceso constructivo de los buques que sus autores consideraban más significativos para las demandas que se planteaban en ese momento. Este proceso que combinaba generación de formas y construcción del buque provenía de una secular tradición nacida en el Mediterráneo. Mediante reglas geométricas sencillas, el constructor naval trazaba las secciones centrales y el perfil de la nao, quedando los extremos de la misma (hasta más de la mitad de la eslora) a su buen hacer y experiencia. Las herramientas informáticas de generación de superficies mediante NURBs (Non- Uniform Rational B-spline) permiten reconstruir las formas de los navíos reproduciendo con fiabilidad las carenas de los mismos a partir de los documentos de la época. Mediante un estudio detallado de interpretación de los textos y transcribiendo los procesos, llegamos a obtener con un buen grado de precisión las carenas de los buques descritos en sus páginas. A partir de ahí y mediante el análisis cualitativo y cuantitativo de los parámetros obtenidos es posible valorar si las soluciones representadas por los barcos respondían a las preguntas planteadas por sus autores , la influencia de factores externos a la construcción naval tales como las regulaciones del Estado o identificar su relación con el germen y la expansión de la teoría que ha determinado los efectos de la Ciencia en la Arquitectura Naval. Comenzando por la nao veneciana de 1550, heredera de la secular tradición constructiva mediterránea, hasta llegar a las Reales Ordenanzas promulgadas en 1618, se reproducen hasta nueve carenas a partir de otros tantos documentos, se dibujan sus planos de formas y se exportan para su análisis hidrostático. El trabajo requiere la realización de otros estudios en paralelo necesarios para entender aquellos factores que formaron parte del desarrollo tecnológico naval como son, las unidades de medida en uso en los astilleros, los distintos sistemas de arqueo impuestos por la Corona y la representación de los diferentes instrumentos geométricos de modificación de los parámetros de diseño. A lo largo del trabajo se dan respuesta a interrogantes planteados por la arqueología en relación con el desarrollo de la arquitectura naval poniendo en evidencia que durante este período quedaron establecidos los fundamentos teórico-prácticos de lo que más adelante se convirtió en la ciencia de la ingeniería naval y se plantean nuevos retos para aquellos que deseen continuar la apasionante tarea de la investigación científica de nuestra historia. ABSTRACT The period of the History comprised between 1570 and 1620 has left an important set of shipbuilding documents in the Iberian Peninsula. In a turbulent time in which the kingdoms of Spain and Portugal were ruled under the same Crown, manuscripts, books and laws that reflect the growing concern of society for the naval theme arose. We found among their pages shipbuilding process descriptions of the more relevant vessels that responded to claims that arose at that time. This process brought together hull generation and shipbuilding and came from a secular tradition born in the Mediterranean. By means of simple geometric rules, the shipbuilder traced the central sections and profile of the ship, leaving the ends thereof (almost half of the length) to its good performance and experience. 3D computer modelling software by NURBs (Non-Uniform Rational B-spline) surfaces helps to reconstruct ships hulls from contemporary documents. Through a detailed texts interpretation and transcription processes, we manage to reach with a good degree of accuracy the ship hulls described in its pages. From there and through qualitative and quantitative analysis of the parameters obtained we can assess whether the solutions represented by ships gave response to the questions raised by the authors, the influence of external factors such as shipbuilding state regulations or identify their relationship to the origin and expansion of the theory that has determined the effects of Science in Naval Architecture. From the 1550 Venetian nao, inheritor of the secular Mediterranean building tradition, to the Royal Ordinances enacted in 1618, as nine hulls are reproduced, their line drawings are traced and exported for analysis hydrostatic. Further studies are needed to understand the factors that were part of shipbuilding technology development as the units of measure in use in shipyards, the different official regulations for calculating ship tonnage and the different geometric instruments to amend the design parameters. The work gives response to questions raised by archaeology in relation to the development of naval architecture highlighting that during this period were established the theoretical and practical foundations of what later became the science of naval engineering and raising new challenges for those wishing to continue the exciting task of scientific research of our History.

Integrated learning of computer applications for production engineering

A high productivity rate in Engineering is related to an efficient management of the flow of the large quantities of information and associated decision making activities that are consubstantial to the Engineering processes both in design and production contexts. Dealing with such problems from an integrated point of view and mimicking real scenarios is not given much attention in Engineering degrees. In the context of Engineering Education, there are a number of courses designed for developing specific competencies, as required by the academic curricula, but not that many in which integration competencies are the main target. In this paper, a course devoted to that aim is discussed. The course is taught in a Marine Engineering degree but the philosophy could be used in any Engineering field. All the lessons are given in a computer room in which every student can use each all the treated software applications. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using Ms-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity, ending up with the case of vessel construction. The second part of the course is dedicated to the use of a database manager, Ms-ACCESS, for managing production related information. A series of increasing complexity examples is treated ending up with the management of the pipe database of a real vessel. This database consists of a few thousand of pipes, for which a production timing frame is defined, which connects this part of the course with the first one. Finally, the third part of the course is devoted to the work with FORAN, an Engineering Production package of widespread use in the shipbuilding industry. With this package, the frames and plates where all the outfitting will be carried out are defined through cooperative work by the studens, working simultaneously in the same 3D model. In the paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feed-back from their experience as well as to assess their satisfaction with the learning process. Results from these surveys are discussed in the paper

Therapeutic metaphors in engineering: how to cure a building structure

Cognitive linguistics have conscientiously pointed out the pervasiveness of conceptual mappings, particularly as conceptual blending and integration, that underlie language and that are unconsciously used in everyday speech (Fauconnier 1997, Fauconnier & Turner 2002; Rohrer 2007; Grady, Oakley & Coulson 1999). Moreover, as a further development of this work, there is a growing interest in research devoted to the conceptual mappings that make up specialized technical disciplines. Lakoff & Núñez 2000, for example, have produced a major breakthrough on the understanding of concepts in mathematics, through conceptual metaphor and as a result not of purely abstract concepts but rather of embodiment. On the engineering and architecture front, analyses on the use of metaphor, blending and categorization in English and Spanish have likewise appeared in recent times (Úbeda 2001, Roldán 1999, Caballero 2003a, 2003b, Roldán & Ubeda 2006, Roldán & Protasenia 2007). The present paper seeks to show a number of significant conceptual mappings underlying the language of architecture and civil engineering that seem to shape the way engineers and architects communicate. In order to work with a significant segment of linguistic expressions in this field, a corpus taken from a widely used technical Spanish engineering journal article was collected and analysed. The examination of the data obtained indicates that many tokens make a direct reference to therapeutic conceptual mappings, highlighting medical domains such as diagnosing,treating and curing. Hence, the paper illustrates how this notion is instantiated by the corresponding bodily conceptual integration. In addition, we wish to underline the function of visual metaphors in the world of modern architecture by evoking parts of human or animal anatomy, and how this is visibly noticeable in contemporary buildings and public works structures.

Bilingual Polytechnic Dictionary of Metaphors: Spanish to English

This paper provides an overview of an ongoing research project work: “A Polytechnical Bilingual Dictionary of Metaphors: Spanish-English/English-Spanish” done by the UPM consolidated research group “DISCYT” (Estudios Cognitivos del Discurso Científico-Técnico). A detailed explanation of the method adopted to identify key metaphors collected from the different subject areas is included. Drawing from recognized empirical methods (Pragglejaz 2007, Cameron 2007, Steen 2007), the examples have been examined according to the main tenets of conceptual metaphor and conceptual integration theory (Deignan 2005, Gibbs 2008, Lakoff 1993, Lakoff & Johnson 1999, Steen 2007, Fauconnier & Turner 2008). This forthcoming dictionary comprises metaphors of over 10 scientific and technical areas such as Aeronautical engineering, Agronomy, Architecture, Biotechnology, Civil engineering, Geology and Mining, Mechanical engineering, Nanotechnology, Naval and Maritime engineering, Sports and Telecommunications. In this paper, we focus on the study of examples taken from civil engineering, materials engineering and naval engineering. Representative cases are analyzed from several points of view (multimodal metaphor, linguistic information strategies and translation into target language) highlighting cross linguistic variations between Spanish and English.

A time-domain finite element method for seakeeping and wave resistance problems

El objetivo de la tesis es la investigación de algoritmos numéricos para el desarrollo de herramientas numéricas para la simulación de problemas tanto de comportamiento en la mar como de resistencia al avance de buques y estructuras flotantes. La primera herramienta desarrollada resuelve el problema de difracción y radiación de olas. Se basan en el método de los elementos finitos (MEF) para la resolución de la ecuación de Laplace, así como en esquemas basados en MEF, integración a lo largo de líneas de corriente, y en diferencias finitas desarrollados para la condición de superficie libre. Se han desarrollado herramientas numéricas para la resolución de la dinámica de sólido rígido en sistemas multicuerpos con ligaduras. Estas herramientas han sido integradas junto con la herramienta de resolución de olas difractadas y radiadas para la resolución de problemas de interacción de cuerpos con olas. También se han diseñado algoritmos de acoplamientos con otras herramientas numéricas para la resolución de problemas multifísica. En particular, se han realizado acoplamientos con una herramienta numérica basada de cálculo de estructuras con MEF para problemas de interacción fluido-estructura, otra de cálculo de líneas de fondeo, y con una herramienta numérica de cálculo de flujos en tanques internos para problemas acoplados de comportamiento en la mar con “sloshing”. Se han realizado simulaciones numéricas para la validación y verificación de los algoritmos desarrollados, así como para el análisis de diferentes casos de estudio con aplicaciones diversas en los campos de la ingeniería naval, oceánica, y energías renovables marinas. ABSTRACT The objective of this thesis is the research on numerical algorithms to develop numerical tools to simulate seakeeping problems as well as wave resistance problems of ships and floating structures. The first tool developed is a wave diffraction-radiation solver. It is based on the finite element method (FEM) in order to solve the Laplace equation, as well as numerical schemes based on FEM, streamline integration, and finite difference method tailored for solving the free surface boundary condition. It has been developed numerical tools to solve solid body dynamics of multibody systems with body links across them. This tool has been integrated with the wave diffraction-radiation solver to solve wave-body interaction problems. Also it has been tailored coupling algorithms with other numerical tools in order to solve multi-physics problems. In particular, it has been performed coupling with a MEF structural solver to solve fluid-structure interaction problems, with a mooring solver, and with a solver capable of simulating internal flows in tanks to solve couple seakeeping-sloshing problems. Numerical simulations have been carried out to validate and verify the developed algorithms, as well as to analyze case studies in the areas of marine engineering, offshore engineering, and offshore renewable energy.

Assessment of work performed by paired students: a pedagogical experience

“Teamwork” is one of the abilities most valued by employers. In [16] we describe the process of adapting to the ECTS methodologies (for ongoing assessment), a course in computer programming for students in a technical degree (Marine Engineering, UPM) not specifically dedicated to computing. As a further step in this process we have emphasized cooperative learning. For this, the students were paired and the work of each pair was evaluated via surprise tests taken and graded jointly, and constituting a substantial part of the final grade. Here we document this experience, discussing methodological aspects, describing indicators for measuring the impact of these methodologies on the educational experience, and reporting on the students’ opinion of it.

Hacia un Plano de Directrices Territoriales y Urbanísticas como instrumento esencial para la Habitabilidad Básica

La habitabilidad precaria (HaP) constituye hoy el primer problema mundial del urbanismo, la ordenación del territorio y varias otras disciplinas, como la arquitectura y varias ingenierías que, en conjunto, estructuran e impulsan el sector de la construcción mundial que se centra en atender el alojamiento humano en su diversidad de funciones. En la Conferencia Habitat II, celebrada en 1996 en Estambul, ante el desmesurado crecimiento cuantitativo de la HaP mundial, se planteó la prioridad de prevenir el problema de los nuevos asentamientos precarios: “paliar los problemas relacionados con los asentamientos humanos espontáneos mediante programas y políticas que se anticipen a los asentamientos no planeados”1, sin embargo, tras casi veinte años, aún no existe una herramienta sustantiva y específica que facilite a los políticos responsables de gestionar el desarrollo urbano en ciudades con bajos recursos de países en desarrollo, tomar decisiones que transformen de la forma más eficiente posible el fenómeno de la proliferación de asentamientos informales en una oportunidad de progreso y prosperidad para sus ciudades. La presente tesis parte de la convicción, que trata de fundamentar objetivamente a lo largo del desarrollo de su documentación, de que dicha herramienta fundamental ha de buscarse, a partir de la teoría Habitabilidad Básica, como un soporte esencial con el que reconducir los futuros procesos de ocupación espontánea periurbana. El propósito de la investigación se concreta en caracterizar, y conocer la óptima aplicabilidad, de un instrumento operativo elemental que ayude en la toma de decisiones estratégicas de las autoridades responsables sobre la mejor ubicación de los asentamientos que, hasta la existencia y aplicabilidad de este instrumento, se consideran espontáneos. Asentamientos espontáneos éstos que, en condiciones normales quedarían sujetos durante años a la precariedad mientras que por medio de tal instrumento abandonarían su génesis espontánea para acceder a través de planificación elemental a condiciones de Habitabilidad Básica. La materialización concreta de esta herramienta sería un plano sintético de directrices de ordenación territorial y urbana denominado Plano de Elección del Sitio (PES). Diseñado como un Modelo Teórico Elemental, su aplicación estaría preferentemente orientada a ciudades pequeñas de países en desarrollo que presenten escaso nivel institucional, limitada capacidad económica y técnica, así como ausencia o ineficacia en su planeamiento. A través de un proceso de investigación basado en: la mencionada teoría de la Habitabilidad Básica, la literatura científica de la materia y las experiencias de casos recientes de planificación urbana mediante la aplicación de sistemas de información del suelo, se propone una caracterización y aplicabilidad preliminar de la herramienta. Tras analizar pormenorizadamente sus fortalezas y debilidades y contando con la participación de un grupo de expertos independientes, el trabajo concluye con una nueva caracterización de la herramienta y la reformulación de la hipótesis inicial. ABSTRACT Nowadays, the precarious habitability (PHa) is the main problem of urbanism around the world, land-use planning and several other disciplines such as architecture and different engineering studies that, as a whole, structure and boost the global construction sector which focuses on meeting the Human accommodation in its functional diversity. In the Habitat II Conference in Istanbul in 1996, in light of the excessive quantitative growth of the global PHa, the priority of preventing the problem of new squatter settlements was raised: "to alleviate the problems related to spontaneous human settlements through programs and policies that anticipate unplanned settlements"2, however, after nearly twenty years, there is still no substantive and specific tool to facilitate policy makers to manage urban development for towns with low-income in developing countries, taking decisions that transform as efficiently as possible the phenomenon of the proliferation of informal settlements into an opportunity for progress and prosperity for their cities. This thesis is based on the conviction, which tries to objectively substantiate along the development of its documentation, that this fundamental tool has to be sought from the Basic Habitability theory as an essential support to redirect the future processes of peri-urban spontaneous occupation. The purpose of the research is carried out to characterize, and know the optimum applicability of a basic operational tool to assist in the strategic decisions making of the responsible authorities on the best location of settlements that, until the existence and applicability of this instrument, are considered spontaneous. Spontaneous settlements which, under normal conditions would be subject to the precariousness for years while under that instrument they would abandon their spontaneous genesis for accessing by elemental planning to the Basic Habitability. The concretionary materialization of this tool would be a synthetic guidelines plan of territorial and urban planning called Site Election Plan (SEP). Designed as a Elementary Theoretical Model, its application would preferably be oriented for small towns in developing countries that represent a low institutional, economic and technical limited capacity, as well as the absence or ineffectiveness in their planning. Throughout a research process based on: the aforementioned theory of Basic Habitability, the scientific literature of the subject and the experiences of recent cases of urban planning through the application of soil information systems, characterization and preliminary applicability of the tool is proposed. After attentively analyzing their strengths and weaknesses and with the participation of a group of independent experts, the paper concludes with a new characterization of the tool and the reformulation of the initial hypothesis.

Integrated learning of production engineering software applications in a shipbuilding context

Acourse focused on the acquisition of integration competencies in ship production engineering, organized in collaboration with selected industry partners, is presented in this paper. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using MS-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity with the final one being the construction planning of a vessel. The second part of the course is dedicated to the use of a database manager, MS-ACCESS, in managing production related information.Aseries of increasing complexity examples is treated, the final one being the management of the piping database of a real vessel. This database consists of several thousand pipes, for which a production timing frame is defined connecting this part of the course with the first one. Finally, the third part of the course is devoted to working withFORAN,an Engineering Production application developed bySENERand widely used in the shipbuilding industry. With this application, the structural elements where all the outfittings will be located are defined through cooperative work by the students, working simultaneously in the same 3D model. In this paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feedback from their experience as well as to assess their satisfaction with the learning process, compared to more traditional ones. Results from these surveys are discussed in the paper.

Specific skills assessment learned by students of building engineering and technical architecture in topics relating to durability and control of concrete structures

In many university courses such as Building Engineering or Technical Architectural, the high density of the contents included in the curriculum, make the student, after graduation, unable to develop the skills already acquired and evaluated in the disciplines of the first courses. From the Group of Educational Innovation at the Polytechnic University of Madrid (UPM) "Teaching of Structural Concrete" (GIEHE) we have conducted a study in which are valued specific skills acquired by students after the first courses of career. We have worked with students from UPM fourth-year career and with Technical Architecture students who have completed their studies and also have completed the Adaptation Course of Technical Architecture to the Building Engineer. The work is part of the Educational Innovation Project funded by the UPM "Integration of training and assessment of generic and specific skills in structural concrete" We have evaluated specific skills learned in the areas of durability and control of structural concrete structures. The results show that overall, students are not able to fully develop the skills already acquired earlier, even being these essential to their professional development. Possibly, the large amount of content taught in these degrees together with a teaching and assessment of "flat profile", ie, which are presented and evaluated with the same intensity as the fundamental and the accessory, are causes enough to cause these results.

El nuevo escenario global y un modelo de negocio para la industria naval militar del 2025

Los retos y oportunidades a los que se enfrentan las organizaciones y administraciones de las primeras décadas del siglo XXI se caracterizan por una serie de fuerzas perturbadoras como la globalización, el avance de las tecnologías emergentes y el desequilibrio económico, que están actuando como impulsores de la transformación del mercado. La acción conjunta de estos factores está obligando a todas las empresas industriales a tener que trabajar con mayores y más exigentes niveles de productividad planteándose continuamente como mejorar y lograr satisfacer los requerimientos de los clientes. De esta situación surge la necesidad de volver a plantearse de nuevo ¿quién es el cliente?, ¿qué valora el cliente? y ¿cómo se pueden generan beneficios sostenibles? La aplicación de esta reflexión a la industria naval militar marca los objetivos a los que esta tesis doctoral busca dar respuesta. El primer objetivo, de carácter general, consiste en la definición de un modelo de negocio sostenible para la industria naval militar del 2025 que se adapte a los requisitos del cliente y al nuevo escenario político, económico, social, tecnológico y ambiental que rodea esta industria. El segundo objetivo, consecuencia del modelo general, trata de desarrollar una metodología para ejecutar programas de apoyo al ciclo de vida del “buque militar”. La investigación se estructura en cuatro partes: en la primera se justifica, por un lado, la necesidad del cambio de modelo y por otro se identifican los factores estructurantes para la definición del modelo. La segunda parte revisa la literatura existente sobre uno de los aspectos básicos para el nuevo modelo, el concepto Producto-Servicio. La tercera parte se centra totalmente en la industria naval militar estudiando los aspectos concretos del sector y, en base al trabajo de campo realizado, se identifican los puntos que más valoran las Marinas de Guerra y como estas gestionan al buque militar durante todo su ciclo de vida. Por último se presentan los principios del modelo propuesto y se desarrollan los pilares básicos para la ejecución de proyectos de Apoyo al Ciclo de Vida (ACV). Como resultado de la investigación, el modelo propuesto para la industria naval militar se fundamenta en once principios: 1. El buque militar (producto de alto valor añadido) debe ser diseñado y construido en un astillero del país que desarrolla el programa de defensa. 2. El diseño tiene que estar orientado al valor para el cliente, es decir, se tiene que diseñar el buque militar para que cumpla su misión, eficaz y eficientemente, durante toda su vida operativa, asegurando la seguridad del buque y de las personas y protegiendo el medio ambiente de acuerdo con las regulaciones vigentes. 3. La empresa debe suministrar soluciones integrales de apoyo al ciclo de vida al producto. 4. Desarrollar y mantener las capacidades de integración de sistemas complejos para todo el ciclo de vida del buque militar. 5. Incorporar las tecnologías digitales al producto, a los procesos, a las personas y al propio modelo de negocio. 6. Desarrollar planes de actuación con el cliente domestico a largo plazo. Estos planes tienen que estar basados en tres premisas: (i) deben incluir el ciclo de vida completo, desde la fase de investigación y desarrollo hasta la retirada del buque del servicio; (ii) la demanda debe ser sofisticada, es decir las exigencias del cliente, tanto desde la óptica de producto como de eficiencia, “tiran” del contratista y (iii) permitir el mantenimiento del nivel tecnológico y de las capacidades industriales de la compañía a futuro y posicionarla para que pueda competir en el mercado de exportación. 7. Impulsar el sector militar de exportación mediante una mayor actividad comercial a nivel internacional. 8. Fomentar la multilocalización ya que representa una oportunidad de crecimiento y favorece la exportación posibilitando el suministro de soluciones integrales en el país destino. 9. Reforzar la diplomacia institucional como palanca para la exportación. 10. Potenciar el liderazgo tecnológico tanto en producto como en procesos con políticas activas de I + D+ i. 11. Reforzar la capacidad de financiación con soluciones innovadoras. El segundo objetivo de esta tesis se centra en el desarrollo de soluciones integrales de Apoyo al Ciclo de Vida (ACV). La metodología planteada trata de minimizar la brecha entre capacidades y necesidades a lo largo de la vida operativa del barco. Es decir, el objetivo principal de los programas de ACV es que la unidad conserve durante toda su vida operativa, en términos relativos a las tecnologías existentes, las capacidades equivalentes a las que tendrá cuando entre en servicio. Los ejes de actuación para conseguir que un programa de Apoyo al Ciclo de Vida cumpla su objetivo son: el diseño orientado al valor, la ingeniería de Apoyo al Ciclo de Vida, los proyectos de refresco de tecnología, el mantenimiento Inteligente y los contratos basados en prestaciones. ABSTRACT On the first decades of the 21st century, organizations and administrations face challenges and come across opportunities threatened by a number of disruptive forces such as globalization, the ever-changing emerging technologies and the economic imbalances acting as drivers of the market transformation. This combination of factors is forcing all industrial companies to have more and higher demanding productivity levels, while bearing always in mind how to improve and meet the customer’s requirements. In this situation, we need to question ourselves again: Who is the customer? What does the customer value? And how can we deliver sustainable economic benefits? Considering this matter in a military naval industry framework sets the goals that this thesis intends to achieve. The first general goal is the definition of a new sustainable business model for the 2025 naval industry, adapted to the customer requirements and the new political, economic, social, technological and environmental scenario. And the second goal that arises as a consequence of the general model develops a methodology to implement “warship” through life support programs. The research is divided in four parts: the first one justifies, on the one hand, the need to change the existing model and, on the other, identifies the model structural factors. On the second part, current literature regarding one of the key issues on the new model (the Product-Service concept) is reviewed. Based on field research, the third part focuses entirely on military shipbuilding, analyzing specific key aspects of this field and identifying which of them are valued the most by Navies and how they manage through life cycles of warships. Finally, the foundation of the proposed model is presented and also the basic grounds for implementing a Through Life Support (TLS) program are developed. As a result of this research, the proposed model for the naval industry is based on eleven (11) key principles: 1. The warship (a high added value product) must be designed and built in a shipyard at the country developing the defense program. 2. Design must be customer value oriented, i.e.warship must be designed to effectively fulfill its mission throughout its operational life, ensuring safety at the ship and for the people and protecting the environment in accordance with current regulations. 3. The industry has to provide integrated Through Life Support solutions. 4. Develop and maintain integrated complex systems capabilities for the entire warship life cycle. 5. Introduce the product, processes, people and business model itself to digital technologies. 6. Develop long-term action plans with the domestic customer. These plans must be based on three premises: (i) the complete life cycle must be included, starting from the research and development stage throughout the ship’s disposal; (ii) customer demand has to be sophisticated, i.e. customer requirements, both from the efficiency and product perspective, "attract" the contractor and (iii) technological level and manufacturing capabilities of the company in the future must be maintained and a competitive position on the export market has to be achieved. 7. Promote the military exporting sector through increased international business. 8. Develop contractor multi-location as it entails an opportunity for growth and promote export opportunities providing integrated solutions in the customer's country. 9. Strengthen institutional diplomacy as a lever for export. 10. Promote technological leadership in both product and processes with active R & D & I policies (Research & Development & Innovation) 11. Strengthen financing capacity through innovative solutions. The second goal of this thesis is focused on developing integrated Through Life Support (TLS) solutions. The proposed methodology tries to minimize the gap between needs and capabilities through the ship operational life. It means, the main TLS program objective is to maintain the ship’s performance and capabilities during operational life, in relative terms to current technologies, equivalent to those the ship had when it entered service. The main actions to fulfill the TLS program objectives are: value-oriented design, TLS engineering, technology updating projects, intelligent maintenance and performance based contracts.

Contribución a las nuevas tendencias en el diseño de tuberías en construcción naval

En la situación actual, tanto las posibilidades de contratar como los resultados económicos de un astillero, dependen de su capacidad para construir un buque en el plazo mas corto posible. Dentro de los trabajos de diseño y construcción de de un buque el trabajo de tuberías ha sido el que tradicionalmente ha condicionado los plazos de construcción. En este estudio se considerara que se han tenido en cuenta los criterios necesarios para que las instalaciones del buque funcionen correctamente y se verá como los sistemas de diseño influyen en el coste y plazo del buque y, por tanto, en la productividad del astillero. Se estudian los distintos procesos de diseño, fabricación y montaje de tuberías, la evolución de estos procesos a lo largo del tiempo, los módulos de armamento que se realizan en los astilleros, los modelos de cámara de máquinas, y los sistemas de ayuda al diseño por ordenador. El autor, en su puesto de Jefe de la Oficina Tecnológica de la Factoría de Sevilla de Astilleros Españoles en los últimos 12 años, ha tomado parte activa en esta evolución, formando parte de un equipo que ha situado a este astillero entre los mas avanzarlos de Europa. Todo lo anterior sirve de base para la segunda parte de este estudio, donde se abordan las que, en opinión del autor, son las nuevas tendencias en el diseño de tuberías en la construcción naval. V Integración del CAD/CAM o CIM : CAD = computer aided design o diseño asistido por ordenador, CAM = computer aided manufacturing o fabricación asistida por ordenador, CIM = computer integrated manufacturing o fabricación integrada por ordenador. Se estudia la integración de los procesos de diseño con el resto de los procesos de gestión y de producción de un astillero, proponiéndose un modelo de cómo el autor ve esta integración. Se comenta la actual tendencia a pasar de las automatizaciones duras con maquinas especializadas para cada proceso, a las automatizaciones blandas en las que un robot puede realizar distintos procesos modificando su programación. Se estudian las nuevas posibilidades de la normal i zacio'n, de los planos parametrizados y de la tecnología de grupos aportando algunos ejemplos. Se estudia también como los procesos anteriores conducirán a una optimización del producto en sí, es decir a conseguir mejores buques. En las conclusiones destacamos como el camino que tienen los países desarrollados, como el nuestro, para mantener una industria competitiva de construcción naval va por la mecanización de los procesos constructivos siguiendo las tendencias anteriores y obteniendo buques optimizados. vi SUMMARY Under the present situation the possibilities to contract and the economical results of a Shipyard depend on its capacity to build a ship within the shortest time. i Within the works of design and construction of a ship, piping work has traditionally conditioned the construction time. In this study it shall be considered that the necessary criteria for the ship installations to operate correctly have been taken into account and it shall be noticed how the design systems influence on the cost and time of a ship and therefore on the Shipyard's productivity. Studies are made of different design processes, manufacturing and installation of piping, evolution of these processes along the time, outfitting modules made in the Shipyard, engine room models and computerized design aid systems. The author, in his post of Chief of the Technological Office of Sevilla Shipyard of Astilleros Españoles for the last 12 years, has taken an active part in this evolution, making part of a team which has placed this Shipyard among the most advanced in Europe. All of the above is used for the second part of this study, whereby an approach is made to those who, in the author's opinion, are the new trends in the piping design of shipbuilding. vii Integration of CAD/CAM or CIM: CAD = computer aided design, CAM = computer aided manufacturing, CIM = computer integrated manufacturing. i A study is made of the integration of design processes with the remaining step and production Shipyard processes, proposing a model of how the author views this integration. Comments are made on the present trend to go from hard automations with specialized machines for each process to soft automations, in which a robot can carry out different processes modifying its programmes. Studies are made of: New possibility of standardization, parametrized drawings and group technology, bringing some examples. It is also studied how the above processes shall lead to optimize the product itself, that is, to obtain better ships. In the conclusions we stand out how the way of developed countries (as ours) to maintain a competitive shipbuilding industry is by computerizing constructive processes, following the above trends and obtaining better ships.

Engineering Agent Systems for Decision Support

This paper discusses how agent technology can be applied to the design of advanced Information Systems for Decision Support. In particular, it describes the different steps and models that are necessary to engineer Decision Support Systems based on a multiagent architecture. The approach is illustrated by a case study in the traffic management domain.

Final year project: students and instructors perceptions as a competence-strengthening tool for engineering students

This work indicates the importance of the Final Year Project (FYP) in the strengthening of competences of engineering students. The study also shows which personal competences of students are reinforced most during the FYP process,including the preparation, elaboration, presentation and defence stages. In order to gather information on this subject, a survey was conducted at two different Spanish technical universities—one public and one private—and a comparative analysis was performed of the questionnaires collected. The competence model considered is that used by the Accreditation Board for Engineering and Technology (ABET), since the official title of the public university has been accredited by this model. The results indicate which personal and professional competences of students are reinforced well by undertaking the FYP. Any significant differences in response by university are explained in the study. For validation purposes, the results were contrasted with the instructor’s perspective using the triangulation methodology. Finally, the conclusions drawn will permit the design of new study plans to cope more effectively with the challenges of the FYP in the new Bologna framework.