Risk of Leaching in Soils Amended by Compost and digestate from Municipal Solid Waste

New European directives have proposed the direct application of compost and digestate produced from municipal solid wastes as organic matter sources in agricultural soils. Therefore information about phosphorus leaching from these residues when they are applied to the soil is increasingly mportant. Leaching experiments were conducted to determine the P mobility in compost and digestate mixtures, supplying equivalent amounts to 100 kg P ha?1 to three different types of soils. The tests were performed in accordance with CEN/TS 14405:2004 analyzing the maximum dissolved reactive P and the kinetic rate in the leachate. P biowaste fractionation indicated that digestate has a higher level of available P than compost has. In contrast, P losses in leaching experiments with soil-compost mixtureswere higher than in soil-digestate mixtures. For bothwastes, therewas no correlation between disolved reactive P lost and the water soluble P.The interaction between soil and waste, the long experimentation time, and the volume of leachate obtained caused the waste?s wettability to become an influential parameter in P leaching behavior. The overall conclusion is that kinetic data analysis provides valuable information concerning the sorption mechanism that can be used for predicting the large-scale behavior of soil systems.

Impact of a value chain approach on the sustainability of solid waste management in Mukuru Kwa njenga informal settlements Nairobi, Kenya

En un mundo altamente urbanizado, la gestión de residuos sólidos es un problema primordial en toda ciudad. Las ciudades de paises en desarrollo deben además afrontar retos que no afectan a las ciudades de paises desarrollados. En los paises en desarrollo muchas municipalidades sufren un crecimiento descontrolado de los asentamientos informales sin planificación urbana que hace muy complicada una adecuada gestión de los residuos sólidos urbanos, situación que se agrava al no contar estas con suficientes recursos económicos para llevar a cabo su responsabilidad en cuanto a provisión del sevicio básico de recogida de residuos. La provisión de servicio de recogida de residuos por parte de SHGs (grupos de ayuda comunitarios) en estos asentamientos informales puede ayudar a resolver algunos de estos problemas. Para que esta oportunidad sea completamente explotada, los ingresos de estos grupos deben ser garantizados, teniendo en cuenta que la sostenibilidad de estos grupos depende enteramente de ello. Este estudio pretende averiguar cómo un enfoque de cadena de valor puede mejorar la sostenibilidad de la gestión de residuos sólidos, permitiendo asegurar los ingresos de los recolectores informales de residuos. El estudio propondrá después de analizado el actual sistema, mejoras que permitan desarrollar un medio ambiente saludable en los asentamientos informales donde se desarrolla el estudio. Para alcanzar este objetivo, se ha desarrollado una investigación específica en Nairobi (Kenia) en el asentamiento precario de Mukuru Kwa Njenga, analizando los distintos aspectos relevantes que tienen influencia en una gestión integrada de residuos sólidos y las relaciones entre los distintos actores que tienen influencia en la misma.

Desarrollo de conglomerados con la incorporación de cenizas volantes procedentes de la incineración de residuos sólidos urbanos

Esta tesis presenta los resultados de la investigación realizada sobre la inertización de cenizas volantes procedentes de residuos sólidos urbanos y su posterior encapsulación en distintas matrices de mortero. Durante el proceso de inertización, se ha logrado la inertización de éste residuo tóxico y peligroso (RTP) y también su valorización como subproducto. De esta forma se dispone de nueva “materia prima” a bajo coste y la eliminación de un residuo tóxico y peligroso con la consiguiente conservación de recursos naturales alternativos. La caracterización química de las cenizas analizadas refleja que éstas presentan altas concentraciones de cloruros, Zn y Pb. Durante la investigación se ha desarrollado un proceso de inertización de las cenizas volantes con bicarbonato sódico (NaHCO3) que reduce en un 99% el contenido en cloruros y mantiene el pH en valores óptimos para que la concentración de los metales pesados en el lixiviado sea mínima debido a su estabilización en forma de carbonatos insolubles. Se han elaborado morteros con cuatro tipos distintos de cementos (CEM-I, CEM-II, CAC y CSA) incorporando cenizas volantes inertizadas en una proporción igual a un 10% en peso del árido utilizado. Los morteros ensayados abarcan distintas dosificaciones tanto en la utilización de áridos con distintos diámetros (0/2 y 0/4), como en la relación cemento/árido (1/1 y 1/3). Se han obtenido las propiedades físicas y mecánicas de estos morteros mediante ensayos de Trabajabilidad, Estabilidad Dimensional, Carbonatación, Porosidad y Resistencias Mecánicas. De igual forma, se presentan resultados de ensayos de lixiviación de Zn, Pb, Cu y Cd, sobre probetas monolíticas de los morteros con los mejores comportamientos físico/mecánicos, donde se ha analizado el contenido en iones de dichos metales pesados lixiviados mediante determinación voltamperométrica de redisolución anódica Se concluye que todos los morteros ensayados son técnicamente aceptables, siendo los más favorables los elaborados con Cemento de Sulfoaluminato de Calcio (CSA) y con Cemento de Aluminato de Calcio (CAC). En este último caso, se mejoran las resistencias a compresión de los morteros de referencia en más de un 48%, y las resistencias a flexión en más de un 67%. De igual forma, los ensayos de lixiviado revelan la completa encapsulación de los iones de Zn y la mitigación en el lixiviado de los iones de Pb. Ambos morteros podrían ser perfectamente validos en actuaciones en las que se necesitase un producto de fraguado rápido, altas resistencias iniciales y compensación de las retracciones con una elevada estabilidad dimensional. En base a esto, el material podría ser utilizado como mortero de reparación en viales y pavimentos que requiriesen altas prestaciones, tales como: soleras industriales, pistas de aterrizaje, aparcamientos, etc. O bien, para la confección de elementos prefabricados sin armaduras estructurales, dada su elevada resistencia a flexión. ABSTRACT This dissertation presents the results of a research on inerting fly ash from urban solid waste and its subsequent encapsulation in mortar matrixes. The inerting of this hazardous toxic waste, as well as its valorization as a by-product has been achieved. In this way, a new "raw material" is available through a simple process and the toxic and hazardous waste is eliminated, and consequently, conservation of alternative natural resources is strengthened. Chemical analysis of the ashes analyzed shows high concentrations of soluble chlorides, Zn and Pb. An inerting process of fly ash with sodium bicarbonate (NaHCO3) has been developed which reduces 99% the content of chlorides and maintains pH at optimal values, so that the concentration of heavy metals in the leachate is minimum, due to its stabilization in the form of insoluble carbonates. Mortars with four different types of cements (CEM-I, CEM-II, CAC and CSA) have been developed by the addition of inertized fly ash in the form of carbonates, in the proportion of 10% in weight of the aggregates used. The samples tested include different proportions in the use of aggregates with different sizes (0/2 and 0/4), and in the cement/aggregate ratio (1/1 and 1/3). Physical/mechanical properties of these mortars have been studied through workability, dimensional stability, carbonation, porosity and mechanic strength tests. Leaching tests of Zn, Pb, Cu and Cd ions are also being performed on monolithic samples of the best behavioral mortars. The content in leachated heavy metal ions is being analyzed through stripping voltammetry determination. Conclusions drawn are that the tested CAC and CSA cement mortars present much better behavior than those of CEM-I and CEM-II cement. The results are especially remarkable for the CAC cement mortars, improving reference mortars compression strengths in more than 48%, and also bending strengths in more than 67%. Leaching tests confirm that the encapsulation of Zn and Pb is achieved and leachate of both ions is mitigated within the mortar matrixes. For the above stated reasons, it might be concluded that mortars made with calcium aluminate cements or calcium sulfoaluminate with the incorporation of treated fly ash, may be perfectly valid for uses in which a fast-curing product, with high initial strength and drying shrinkage compensation with a high dimensional stability is required. Based on this, the material could be used as repair mortar for structures, roads and industrial pavements requiring high performance, such as: industrial floorings, landing tracks, parking lots, etc. Alternatively, it could also be used in the manufacture of prefabricated elements without structural reinforcement, given its high bending strength.

Factors impacting the market share of Construction and Demolition (C&D) Waste recycling solutions

Current EU Directives force the Member States to assure by 2020 that 70% of the Construction and Demolition (C&D) waste is recovered instead of landfilled. While some countries have largely achieved this target, others still have a long way to go. For better understanding the differences arising from local disparities, six factors related to technical, economic, legislative and environmental aspects have been identified as crucial influences in the market share of C&D waste recycling solutions. These factors are able to identify the causes that limit the recycling rate of a certain region. Moreover, progress towards an efficient waste management can vary through the improvement of a single factor. This study provides the background for further fine-tuning the factors and their combination into a mathematical model for assessing the market share of C&D recycling solutions.

Approach to the use of indicators for the assessment of the environmental level of construction products

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this research, the environmental level of a construction product has been defined as its quality of accomplishing the construction requirements needed by causing the minimum ecological impact in its surrounding environment. This information allows building actors to choose suitable materials for building needs and also for the environment, mainly in the project stage or on the building site, contributing to improve the relationship between buildings and environment. For the assessment of the environmental level of construction products, five indicators have been identified regarding their global environmental impact through the product life cycle: CO2 emissions provoked during their production, volume and toxicity of waste generated on the building site, durability and recycling capacity after their useful life. Therefore, the less environmental impact one construction product produces, the higher environmental level performs. The model has been tested in 30 construction products that include environmental criteria in their description. The results obtained will be discussed in this article. Furthermore, this model can lay down guidelines for the selection of ecoefficient construction products and the design of new eco-competitive and eco-committed ones

Use of alternative fuels obtained from renewable sources in brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Use of alternative fuels obtained from renowable sources in Brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Carbon dioxide emissions from semi-arid soils amended with biochar alone or combined with mineral and organic fertilizers

Semi-arid soils cover a significant area of Earth s land surface and typically contain large amounts of inorganic C. Determining the effects of biochar additions on CO2 emissions fromsemi-arid soils is therefore essential for evaluating the potential of biochar as a climate change mitigation strategy. Here, we measured the CO2 that evolved from semi-arid calcareous soils amended with biochar at rates of 0 and 20 t ha?1 in a full factorial combination with three different fertilizers (mineral fertilizer, municipal solid waste compost, and sewage sludge) applied at four rates (equivalent to 0, 75, 150, and 225 kg potentially available N ha?1) during 182 days of aerobic incubation. A double exponential model, which describes cumulative CO2 emissions from two active soil C compartments with different turnover rates (one relatively stable and the other more labile), was found to fit verywell all the experimental datasets. In general, the organic fertilizers increased the size and decomposition rate of the stable and labile soil C pools. In contrast, biochar addition had no effects on any of the double exponential model parameters and did not interact with the effects ascribed to the type and rate of fertilizer. After 182 days of incubation, soil organic and microbial biomass C contents tended to increase with increasing the application rates of organic fertilizer, especially of compost, whereas increasing the rate of mineral fertilizer tended to suppress microbial biomass. Biochar was found to increase both organic and inorganic C contents in soil and not to interactwith the effects of type and rate of fertilizer on C fractions. As a whole, our results suggest that the use of biochar as enhancer of semi-arid soils, either alone or combined with mineral and organic fertilizers, is unlikely to increase abiotic and biotic soil CO2 emissions.

Implantación de un sistema de depósito, devolución y retorno en el mercado retail español

“Quien contamina, paga“, con esta premisa surgió la idea de este Trabajo Fin de Máster, en adelante TFM, cuyo objetivo era identificar medidas alternativas reales para una optimización del proceso actual de gestión de residuos sólidos urbanos ante una sociedad cada vez más superpoblada y con mayores ratios de consumo. Cada español genera anualmente un volumen de 485 Kg de residuos, de los cuales únicamente el 33 % son reciclados y pueden volver a un flujo normal de uso, especialmente preocupante durante los últimos años es el auge de los productos envasados, tanto de bebidas como de alimentos , cuya utilización se ha duplicado en la última década. La motivación de este trabajo Fin de Máster ha sido la de poner de manifiesto que la sostenibilidad con el medioambiente puede ir de la mano de la rentabilidad y del progreso. Durante este TFM se ha estudiado y analizado la viabilidad económica de implantación de un nuevo modelo de depósito, devolución y retorno en el mercado retail español y como con la adopción de este nuevo sistema se pueden lograr beneficios tanto para el propio minorista, como para el medio ambiente con ratios de reciclado superiores al 98%. La preocupación por el medio ambiente empieza a ser una constante entre los consumidores españoles y dicha preocupación comienza a ser influenciadora en las decisiones de compra (productos eco, sostenibilidad…). Nuestra propuesta consiste en dotar a los principales distribuidores del sector retail español de un sistema de depósito, devolución y retorno para envases de bebidas capaz de generar diferenciación, innovación y rentabilidad frente a la competencia. Dicho sistema consiste en pagar un depósito por cada envase de bebida que se adquiera y su correspondiente devolución en la siguiente compra, una vez que se devuelva vacío al establecimiento. Para ello se ha analizado el sector de la distribución en España, especialmente la distribución de bebidas. Se trata de un sector muy competitivo, que presenta varios formatos en función del tamaño del establecimiento (Hipermercados, Supermercados, tiendas tradicionales). Las principales empresas distribuidoras (Carrefour, Mercadona, Alcampo, Eroski, DIA) se encuentran en procesos de cambios estratégicos para lograr atraer a más consumidores hacia sus tiendas, por lo que nuestra propuesta podrá añadir valor a la hora de influenciar en la decisión del lugar de compra. En nuestro caso, nos dirigiremos principalmente a las grandes empresas distribuidoras, Hipermercados de más de 2.500 m2 ,que cuentan con más de 500 puntos de venta y distribución donde existe la posibilidad real de implantar un SDDR. Además se ha realizado un estudio de mercado sobre la influencia de dicho sistema en el consumidor final, donde se ha detectado dos segmentos principales cuya decisión de compra se vería muy influenciada por la implantación de un SDDR, un segmento Sénior, entre 45-54 años, preocupados por el medio ambiente y con poder adquisitivo suficiente como para que el pago del depósito no sea bloqueante, y un segmento Junior, entre 18-24 años, también muy concienciado el medio ambiente, de capacidad económica menor pero qué influye en la decisión de compra de sus progenitores. Para llevar a cabo este plan de negocio será necesario una inversión inicial de 57.000 €, con unas expectativas de recuperación de dicha inversión en el primer año y una TIR del 56%, presentando un VAN de 127.961 € para los 7 años de vida del proyecto. Para dar a conocer a los clientes del Hipermercado los beneficios de utilizar un sistema SDDR, se realizarán campañas de marketing a través de diferentes canales, promociones de apertura, acciones de marketing exteriores y planes de fidelización. La organización e implantación en el Hipermercado será muy sencilla con roles claramente diferenciados, únicamente involucraría a unos 9 recursos definidos y en aproximadamente 3 meses desde el inicio del proyecto ya se podría ofertar dicho servicio a los clientes del Hipermercado. Además se han analizado los principales riesgos a los que se enfrentaría el negocio, ponderándose en una matriz impacto-probabilidad. Se han establecido medidas correctoras en el caso que dicho riesgo aflore. Habrá que tener especialmente precaución con la pérdida de ventas durante el arranque del negocio en el caso que esto ocurra, por lo que se deberá controlar el gasto, fomentar la captación de clientes y mantener un fondo de maniobra lo suficientemente elevado como para absorber dicho riesgo.---ABSTRACT---“Polluters pay”, with this premise this TFM aimed at identifying real alternative measures for optimization of the current process of solid waste management in a crowded society and with greater consumption ratios. Spaniards generates an annual volume of 485 kg of waste; only 33 % are recycled and can return to a normal flow. Specially concern is the increased of packaged product in recent years, mainly drink and food, their use has been duplicated in the last decade. The motivation for this Thesis was to highlight that sustainability, profitability and progress can go together. During this TFM has been studied and analyzed the economic feasibility of implementing a new model of deposit , refund and return in the Spanish retail market and as with the adoption of this new system can achieve benefits for the retailer itself therefore to the environment with ratios above 98% recycled. Concern for the environment is becoming a constant among Spanish consumers , and this concern is becoming influencer in purchasing decisions ( eco, sustainability ... ) . Our proposal is to provide the main distributors of the Spanish retail sector a system of deposit, refund and return for beverage containers capable of generating differentiation, innovation and profitability over the competition. This system is to pay a deposit for each beverage container they purchase and their corresponding return in the next purchase, once they return empty to the establishment. For this we have analyzed the distribution sector in Spain, especially the distribution of beverages. This is a highly competitive industry, which features various formats depending on the size of establishments (hypermarkets, supermarkets, traditional shops). The main distribution companies (Carrefour, Mercadona, Alcampo, Eroski, DIA) are in the process of strategic changes in order to attract more consumers to their stores, so that our approach can add value in influencing the decision of place shopping. In our case, we will go mainly to large distributors, Hypermarkets of over 2,500 m2, which have more than 500 outlets and distribution where there is a real possibility of implementing a SDDR. It has also conducted a market study on the influence of that system on the final consumer, which has detected two main segments whose purchasing decisions would be greatly influenced by the introduction of a SDDR, a Senior segment, 45-54 years concerned about the environment and purchasing power enough that the deposit is not blocking, and a Junior Segment, aged 18-24, also concern with environment, lower economic capacity but what influences the decision purchase of their parents). To carry out this business plan will require an initial investment of 57,000 €, with expectations of recovery of such investment in the first year and an IRR of 56%, with an NPV of € 127,961 for the 7 years of the project . To publicize hypermarket customers the benefits of using a SDDR system, marketing campaigns conducted through different channels, opening promotions, marketing activities and external loyalty schemes. The organization and implementation in the Hypermarket is easy with distinct roles, involve only about 9 resourced and in about 3 months from the start of the project and could offer this service to customers in the hypermarket. We have also analyzed the main risks and established corrective measures to surface that risk . We should take caution with lost sales during startup of the business, such as control spending, customer retention and maintaining enough working capital.

Análisis de la degradación, desintegración y biodegradabilidad de bolsas de poliéster y almidón en compostaje de residuos urbanos: escalas de laboratorio e industrial

El principal objetivo de esta tesis es verificar que las bolsas biodegradables de copoliéster (PBAT) con base de almidón (UNE 13432: 2001) alcanzan los niveles de degradación y desintegración requeridos para su certificación (%D= ≥ 90%), medido en condiciones reales de compostaje industrial. Para lograr mayor representatividad, los ensayos se han realizado en dos plantas de tratamiento de residuos urbanos en las que se aplican las técnicas de compostaje más comunes en el ámbito europeo y nacional, pila y túnel, mediante el compostaje de la FORSU. Se llevaron a cabo dos tipos de ensayos. Por un lado se realizó un ensayo escala de laboratorio (ISO 14855), orientado como indicador de la biodegradabilidad del polímero en el formato bolsa comercializado. Por otro lado, se desarrollaron una batería de ensayos realizados en dos plantas de compostaje de residuos urbanos: el Centro de Tratamiento de Residuos de Torija (Ávila), que realiza el compostaje mediante pila volteada, y el Centro de Tratamiento de Residuos de Arenas de San Pedro (Ávila), que realiza el compostaje en túnel. Para la obtención de resultados se han contrastado parámetros como el porcentaje de biodegradación (%B), el porcentaje de desintegración (%D), degradación superficial de las muestras, calidad de la FORSU inicial (caracterizaciones y análisis físico-químico) y calidad del MB final (análisis físico-químico e IG). Atendiendo al objetivo general se demuestra que las bolsas de copoliéster con base de almidón certificadas (UNE EN 13432:2001) han alcanzado el 94,37% ± 0,007% de desintegración en la planta de compostaje de FORSU con pila volteada; y el 86,36% ± 0,151% en la planta de compostaje de FORSU con túnel estático. A pesar de la aparente diferencia, el resultado del análisis concluye que no existen diferencias estadísticamente significativas entre técnicas de compostaje. La presencia de impropios y el contendido de metales pesados en la FORSU no han influido en la desintegración de las bolsas de estudio. En cambio, se ha detectado una influencia estadísticamente significativa entre el contenido de materia orgánica total y de nutrientes de la FORSU y el porcentaje de desintegración de las muestras. No se detectado una relación estadísticamente significativa entre la presencia de bolsas de estudio en las concentraciones definidas, y la calidad del MB, medido mediante el análisis físico-químico, microbiológico y el IG del MB. La concentración de los metales pesados en la mayoría de las muestras de material bioestabilizado cumplió con los límites establecidos para la categoría A, aplicable al “compost” procedente de la fracción orgánica recogida de forma separada según el RD 506/2013 de productos fertilizantes. También se detectó fitotoxicidad alta (FA) según la metodología y criterios de valoración definidos. Esta fitotoxicidad no está relacionada con la presencia de las bolsas de estudio sino con la calidad de la FORSU de partida y/o con los productos liberados durante el proceso de compostaje. ABSTRACT The main objective of this thesis is to verify that the copolyester (PBAT) starch based (UNE 13432: 2001) biodegradable bags reach levels of degradation and disintegration required for it´s certification (% D = ≥ 90%), measured in terms of real industrial composting. The tests were performed at two municipal solid waste (MSW) treatment plants, where the most common composting techniques applied at European and national level were represented, windrow and tunnel. Two types of tests were carried out: First, a laboratory scale test (ISO 14855), as an indicator of the polymer biodegradation of the commercialized bag format. Second, a battery of tests was conducted at two MSW composting plants, Waste Treatment Center of Torija (Guadalajara), that makes compost by turned pile, and the Waste Treatment Center of Arenas de San Pedro (Ávila), where makes compost by static tunnel. To obtain the results, the parameters such as the biodegradation percentage (% B), the disintegration percentage (% D), surface degradation of the samples, the initial quality of FORSU (characterizations and physico-chemical analysis) and bioestabilithated material (MB) quality (physico-chemical analysis and IG) have been compared. In reference to the general aim It shows that the copolyester starch based certified (UNE-EN 13432) bags have reached 94.37% ± 0.007% of disintegration in the composting turned pile; and 86.36% ± 0.151% in the static tunnel. Despite the apparent difference, the result of the analysis concludes that there are no statistically significant differences between composting techniques. The presence of non-compostable materials and the heavy metals content in the FORSU has not affected in the disintegration of the bags. Instead, It has been detected a statistically significant influence over the total organic matter content and nutrient content in the FORSU and the samples disintegration percentage. A statistically significant relationship between the bag presence in the defined concentrations and the quality of MB measured by physical-chemical analysis, microbiological analysis and IG of the MB is not detected. The concentration of heavy metals in most MB samples was within the limits of A-Class, applicable to "compost" from organic waste collected separately according to RD 506/2013 of fertilizers. High phytotoxicity (FA) was also detected according to the methodology and evaluation defined. The phytotoxicity is not related to the presence of bags but it is with the FORSU initial quality and/or with the products released during the composting process.