Underground dwellings in the Tajuña valley, Madrid, Spain and their bioclimatic adaptation

Underground dwellings are the maximum example of the vernacular architecture adaptation to the climatic conditions in areas with high annual and daily thermal fluctuations. This paper summarizes the systematic research about the energy performance of this popular architecture and their adaptation to the outdoor conditions in the case of the low area of the River Tajuña and its surroundings. Some considerations on their maintenance and renovation arise from the research.

Safety assessment of underground vehicles passing over highly resilient straight tracks in the presence of a broken rail

In this paper, vehicle-track interaction for a new slab track design, conceived to reduce noise and vibration levels has been analyzed, assessing the derailment risk for trains running on curved track when encountering a broken rail. Two different types of rail fastening systems with different elasticities have been analysed and compared. Numerical methods were used in order to simulate the dynamic behaviour of the train-track interaction. Multibody system (MBS) modelling techniques were combined with techniques based on the finite element method (FEM). MBS modelling was used for modelling the vehicle and FEM for simulating the elastic track. The simulation model was validated by comparing simulated results to experimental data obtained in field testing. During the simulations various safety indices, characteristic of derailment risk, were analysed. The simulations realised at the maximum running velocity of 110 km/h showed a similar behaviour for several track types. When reducing the running speed, the safety indices worsened for both cases. Although the worst behaviour was observed for the track with a greater elasticity, in none of the simulations did a derailment occur when running over the broken rail.

Safety assessment of underground vehicles passing over highly resilient curved tracks in the presence of a broken rail

Vehicle–track interaction for a new resilient slab track designed to reduce noise and vibration levels was analysed, in order to assess the derailment risk on a curved track when encountering a broken rail. Sensitivity of the rail support spacing of the relative position of the rail breakage between two adjacent rail supports and of running speed were analysed for two different elasticities of the rail fastening system. In none of the cases analysed was observed an appreciable difference between either of the elastic systems. As was expected, the most unfavourable situations were those with greater rail support spacing and those with greater distance from the breakage to the nearest rail support, although in none of the simulations performed did a derailment occur when running over the broken rail. When varying the running speed, the most favourable condition was obtained for an intermediate speed, due to the superposition of two antagonistic effects.

Improved design of an overhead rail current conductor for application in underground lines

Overhead rail current collector systems for railway traction offer certain features, such as low installation height and reduced maintenance, which make them predominantly suitable for use in underground train infrastructures. Due to the increased demands of modern catenary systems and higher running speeds of new vehicles, a more capable design of the conductor rail is needed. A new overhead conductor rail has been developed and its design has been patented [13]. Modern simulation and modelling techniques were used in the development approach. The new conductor rail profile has a dynamic behaviour superior to that of the system currently in use. Its innovative design permits either an increase of catenary support spacing or a higher vehicle running speed. Both options ensure savings in installation or operating costs. The simulation model used to optimise the existing conductor rail profile included both a finite element model of the catenary and a three-dimensional multi-body system model of the pantograph. The contact force that appears between pantograph and catenary was obtained in simulation. A sensitivity analysis of the key parameters that influence in catenary dynamics was carried out, finally leading to the improved design.

Comparison of vibration and rolling noise emission of resilient and solid monobloc railway wheels in underground lines

Flat or worn wheels rolling on rough or corrugated tracks can provoke airborne noise and ground-borne vibration, which can be a serious concern for nearby neighbours of urban rail transit lines. Among the various treatments used to reduce vibration and noise, resilient wheels play an important role. In conventional resilient wheels, a slightly prestressed V­shaped rubber ring is mounted between the steel wheel centre and tyre. The elastic layer enhances rolling noise and vibration suppression, as well as impact reduction on the track. In this paper the effectiveness of resilient wheels in underground lines, in comparison to monobloc ones, is assessed. The analysed resilient wheel is able to carry greater loads than standard resilient wheels used for light vehicles. It also presents a greater radial resiliency and a higher axial stiffness than conventional V­wheels. The finite element method was used in this study. A quarter car model was defined, in which the wheelset was modelled as an elastic body. Several simulations were performed in order to assess the vibrational behaviour of elastic wheels, including modal, harmonic and random vibration analysis, the latter allowing the introduction of realistic vertical track irregularities, as well as the influence of the running speed. Due to numerical problems some simplifications were needed. Parametric variations were also performed, in which the sensitivity of the whole system to variations of rubber prestress and Poisson’s ratio of the elastic material was assessed.Results are presented in the frequency domain, showing a better performance of the resilient wheels for frequencies over 200 Hz. This result reveals the ability of the analyzed design to mitigate rolling noise, but not structural vibrations, which are primarily found in the lower frequency range.

Underground parking structure built with deep foundations and vault precast elements in Spain

In many cases the only places available for the construction of a new car park are the existing streets or roads. These streets may also have important or historic buildings very close to the structure, which means that they cannot be disturbed in any way during the construction of the parking structure. In many cases the only places available for the construction of a new car park are the existing streets or roads. These streets may also have important or historic buildings very close to the structure, which means that they cannot be disturbed in any way during the construction of the parking structure.

Application of protection means against explosions in underground mines

Underground coal mines explosions generally arise from the inflammation of a methane/air mixture. This explosion can also generate a subsequent coal dust explosion. Traditionally such explosions have being fought eliminating one or several of the factors needed by the explosion to take place. Although several preventive measures are taken to prevent explosions, other measures should be considered to reduce the effects or even to extinguish the flame front. Unlike other protection methods that remove one or two of the explosion triangle elements, namely; the ignition source, the oxidizing agent and the fuel, explosion barriers removes all of them: reduces the quantity of coal in suspension, cools the flame front and the steam generated by vaporization removes the oxygen present in the flame. The present paper is essentially based on the comprehensive state-of–the-art of Protective Systems in underground coal mines, and particularly on the application of Explosion Barriers to improve safety level in Spanish coal mining industry. After an exhaustive study of series EN 14591 standards covering explosion prevention and protection in underground mines, authors have proven explosion barriers effectiveness in underground galleries by Full Scale Tests performed in Polish Barbara experimental mine, showing that the barriers can reduce the effects of methane and/or flammable coal dust explosions to a satisfactory safety level.

Natural ventilation in underground wine cellars

The main objective of this research is to promote passive thermal design techniques in the construction of wineries. Natural ventilation in underground cellars is analyzed, focusing on the entrance tunnel, the ventilation chimney and the cave. A monitoring system was designed in order to detect changes in the indoor conditions and outdoor air infiltration. Monitoring process was carried out during one year. Results show the influence of outside temperature, ventilation chimney and access tunnel on the conditions inside the underground cellar. During hot periods, natural ventilation has a negligible influence on the indoor ambience, despite the permanently open vents in the door and chimney. The tunnel and ventilation chimney work as a temperature regulator, dampening outside fluctuations. Forced ventilation is necessary when a high air exchange ratio is needed. During cold periods, there is greater instability as a result of increased natural ventilation. The temperature differences along the tunnel are reduced, reflecting a homogenization and mixing of the air. The ventilation flow is sufficient to modify the temperature and relative humidity of the cave. Forced ventilation is not necessary in this period. During the intermediate periods --autumn and spring-- occurs different behaviors based on time of day.

Characterization of underground cellars in the Duero Basin by GNSS, LIDAR and GPR techniques

The underground cellars of the Duero River basin are part of spread and damaged agricultural landscape which is in danger of disappearing. These architectural complexes are allocated next to small towns. Constructions are mostly dug in the ground with a gallery down or "barrel" strait through which you access the cave or cellar. This wider space is used to make and store wine. Observation and detection of the winery both on the outside and underground is essential to make an inventory of the rural heritage. Geodetection is a non-invasive technique, suitable to determinate with precision buried structures in the ground. The undertaken works include LIDAR survey techniques, GNSS and GPR obtained data. The results are used to identify with centimetric precision construction elements forming the winery. Graphic and cartographic obtained documents allow optimum visualization of the studied field and can be used in the reconstruction of the place.

Observation and Detection of Underground Cellars in the Duero Basin By GNSS, Lidar and Ground Penetrating Radar Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor. It is a unique architectural complex, facing rising, built on a smooth hillock as shown in Fig. 1. These constructions are excavated in the ground. The access to the cave or underground cellar has a shape of a narrow tube or down gallery. Immediately after, this space gets wider. There, wine is produced and stored [1]. Observation and detection of the underground cellar, both on the outside and underground, it is essential to make an inventory of the rural patrimony [2]. The geodetection is a noninvasive technique, adequate to accurately locate buried structures in the ground. Works undertaken include topographic work with the LIDAR techniques and integration with data obtained by GNSS and GPR.

La habitación subterránea en la Península Ibérica : investigación geológica

La habitación rupestre en la Península Ibérica conforma un amplio conjunto de manifestaciones cuyos orígenes son difíciles de dilucidar. Existen conjuntos primitivos, posiblemente horadados durante la Antigüedad Clásica y Tardía, y otros que probablemente se originaron y excavaron en la Alta Edad Media, en los que se mezclan grupos de origen religioso y otros de probable uso defensivo. El conjunto peninsular es sin duda el más variado de Europa Occidental, pues recibió influencias árabes y usos de la cristiandad antigua, importados de Oriente Próximo, que por tanto relacionan estas manifestaciones con otras del arco mediterráneo. La supervivencia del uso de las cuevas a lo largo de la Baja Edad Media -una vez afianzada la Reconquista- es una incógnita, pero los usos rupestres volvieron a generalizarse en ciertos sectores de la Península durante la Edad Moderna, toda vez que el hábitat cuevero manifestó una eclosión relacionada con la peripecia de los moriscos, primero desterrados de sus habitaciones en el Sur y Este peninsular y luego expulsados en los albores del siglo XVII. Los que quedaron, nominalmente conversos, debieron habitar de nuevo cuevas en sus lugares de origen. Esos núcleos son los más abundantes, particularmente en la provincia de Granada y aledañas. Este substrato fue seguramente el punto de apoyo para la proliferación de las cuevas de habitación a partir del siglo XIX, en el cual un creciente proletariado agrícola y urbano necesitó de alojamientos baratos y no hizo sino imitar usos preexistentes, que se pueden rastrear en muchos de los núcleos rupestres que sobrevivieron mayoritariamente hasta bien entrado el siglo XX, y que se abandonaron gradualmente a partir de los años 60 de esa centuria. Para entonces, existían barrios de cuevas extensos en muchas provincias, destacando, aparte de las andaluzas, ciertas zonas de la Cuenca del Ebro (aragonesa, navarra y riojana), del arco periurbano de Valencia, del Sur de Madrid, de la Mancha toledana, o de las provincias de Albacete, Guadalajara, Murcia e incluso de Palencia. Los núcleos antiguos se excavaron -en razón de su origen dedicado a defensa y refugio- en lugares poco accesibles, que mayoritariamente se dan en relieves anfractuosos, en las orlas marginales detríticas y carbonatadas de las cuencas terciarias y en terrenos más antiguos de la geológicamente denominada Cuenca Vasco Cantábrica, en las cuales florecieron centros de eremitismo del primitivo condado de Castilla. También son lugares inaccesibles los riscos asomados a cantiles fluviales, cuya regularización morfológica natural ha sido causa de la ruina de múltiples hipogeos que se labraron con las mismas intenciones de refugio, defensa o retiro espiritual. Los núcleos modernos se han excavado ya en terrenos más propicios (los que componen las cuencas terciarias o "España arcillosa", mayoritariamente), y por ello observamos cómo abundan las litologías sedimentarias, que son aquellas en las que se horadaron casi todas las "colmenas" de habitación moderna en la Península. En unos casos y otros, existen rasgos comunes en lo relativo a la litología y comportamiento de los materiales excavados, y también en lo relativo a su evolución, meteorización y conservación. Se han estudiado por ello estas pautas comunes -como un posible avance para el establecimiento futuro de estudios de geoconservación del patrimonio rupestre habitado-, que se traducen en la determinación de los procesos de meteorización más característicos en los antros de la Península Ibérica -sean modernos o antiguos- y en la determinación de las relaciones más habituales entre geomorfología y tipología de las cuevas de habitación. También se exponen algunas conclusiones relativas a la resistencia de los tipos pétreos en relación a la antigüedad de los emplazamientos. Esta relación se explica bien si tenemos en cuenta que las cuevas antiguas trataban de ser lugares apartados en los que dominan rocas más resistentes -como se ha explicado- y que en las modernas se ha buscado la habitación permanente, en los materiales más blandos ocupan las depresiones terciarias del Centro, Este y Sur de la Península, colonizados no ya como refugios sino de modo seguro, y ya en arrabales "extramuros" de las ciudades. Geomorfológicamente, esta razón histórica tiene consecuencias sobre la posición de las cuevas, sobre su organización, y sobre su conservación. La extensión del dominio estudiado obliga prácticamente a bosquejar algunas de estas conclusiones geológicas, pero permite a su vez proporcionar una visión global acerca del patrimonio troglodítico desde una perspectiva geológica, y en ello radica la principal novedad de la investigación. Cave dwelling in the Iberian Peninsula comprises a great deal of examples whose origins are sometimes difficult to elucidate. There are primitive groups of caves, probably belonging to Classical and Late Antiquity, and other settlements that appear to have been created and excavated in the Early Middle Ages. Some of them are due to religious reasons and some others may probably have served for defensive uses. The Peninsular group is very likely the most diverse in Western Europe, for it was not only influenced by Arabs, but it also assimilated uses from the Antique Christendom, imported from the Middle East. In this sense, Iberian cave dwellings connect with those of the Mediterranean area. There is not total certainty about the survival of caves serving for dwelling throughout the Late Middle Ages, once the Reconquista was a fact. However, underground excavations for human habitation were once again dispread in certain zones of the Peninsula during the Early Modern period. This growth of underground habitats appears in connexion with Morisco’s vicissitudes; first of all, their removal from their settlements in South and Eastern Peninsula, and finally their expulsion from Spanish territory at the very beginning of XVII th century. Those of them who rested in Spain –and that were nominally “converts”- seem to have returned to cave dwelling in their places of origin, particularly in the province of Granada and its neighbouring zones. This substrate may have been the toehold for a new spreading of cave dwellings since XIX th century, when the increasing rural and urban proletariat returned to the pre-existent uses of caves in order to solve the necessity of affordable housing. This fact can still be detected in many of the rock settlements that have survived during a great part of the XX th century and which were gradually abandoned from the 60´s onwards. There were important cave dwelling districts in many Spanish territories by that time, and not only in Andalusia. We also find them in certain areas of the Ebro basin (those of Aragon, Navarra and La Rioja), in the peri-urban arc of Valencia, in the South of Madrid province and also in the provinces of Toledo (the so called “Mancha toledana”), Albacete, Guadalajara, Murcia or even Palencia as well. Due to their defensive and refuge uses, primitive underground habitats were dug in hardly accessible places. The majority of them are located in mountainous and rough areas, when not in the marginal borders of Tertiary basins, where coarse detritic and carbonate formations outcrop. Cave dwellings can also be found in more ancient rock masses, such as those of the Basque Cantabrian Mesozoic Basin, which is the area where hermit centres of the primitive County of Castile first flourished. Cliffs surrounding fluvial valleys are as well inaccessible places, but here we find that geological evolution has caused the destruction of many rock sanctuaries and cliff dwellings that were originally dug with the same purposes of defence, refuge and spiritual retreat. Later modern cave settlements were dug in quite more favourable terrains, mainly in the soils that compose the Tertiary basins, generally known as “España arcillosa” or “Clayey Spain”. Therefore, we find abundant sedimentary fine and medium grained lithologies, which are the ones that have hosted the majority of Modern Era warren cave dwellings in the Iberian Peninsula. Actually, both types of cave dwelling share some standards regarding the lithology of the excavated materials, and they share as well certain patterns that affect to their evolution, weathering and preservation. These common patterns have been studied here in order to determine the most characteristic weathering processes that affect the majority of the Iberian caves, both Antique and Modern. And also with a view to establish the most habitual relationships between geomorphology and typology of cave dwellings. The study may as well provide a first basis for future studies on geo-preservation of cave dwellings heritage. We also reach some conclusions about the strength of different rocks concerning the antiquity of the sites. As we have already pointed out, this relation comes from the fact that ancient caves were placed in remote or isolated locations, where harder rocks outcrop, while more modern ones result from people´s search of permanent dwelling. In this sense, the softer rocks of the Tertiary Basins of Middle, East and South Peninsula provided a secure colonization to this second and modern group. And moreover, considering geomorphological features, this historical reason has had an effect not only on the position and location of the caves, but also on their organisation/structure/distribution and preservation. The huge extension of our domain of interest almost forces to sketch out some of these geological conclusions. But at the same time it gives a global panorama of Spanish troglodyte heritage, seen from a geological perspective. And here is the main novelty of this research.

Characterization of Underground Cellars in the Duero Basin by GNSS, LIDAR and GPR Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor.

Assessment of Underground Wine Cellars Using Geographic Information Technologies

Geographic information technologies (GIT) are essential to many fields of research, such as the preservation and dissemination of cultural heritage buildings, a category which includes traditional underground wine cellars. This article presents a methodology based on research carried out on this type of rural heritage building. The data were acquired using the following sensors: EDM, total station, close-range photogrammetry and laser scanning, and subsequently processed with a specific software which was verified for each case, in order to obtain a satisfactory graphic representation of these underground wine cellars. Two key aspects of this work are the accuracy of the data processing and the visualization of these traditional constructions. The methodology includes an application for geovisualizing these traditional constructions on mobile devices in order to contribute to raising awareness of this unique heritage.