A 2D computational parametric analysis of the sheltering effect of fences on a railway vehicle standing on a bridge and experiencing crosswinds

In a crosswind scenario, the risk of high-speed trains overturning increases when they run on viaducts since the aerodynamic loads are higher than on the ground. In order to increase safety, vehicles are sheltered by fences that are installed on the viaduct to reduce the loads experienced by the train. Windbreaks can be designed to have different heights, and with or without eaves on the top. In this paper, a parametric study with a total of 12 fence designs was carried out using a two-dimensional model of a train standing on a viaduct. To asses the relative effectiveness of sheltering devices, tests were done in a wind tunnel with a scaled model at a Reynolds number of 1 × 105, and the train’s aerodynamic coefficients were measured. Experimental results were compared with those predicted by Unsteady Reynolds-averaged Navier-Stokes (URANS) simulations of flow, showing that a computational model is able to satisfactorily predict the trend of the aerodynamic coefficients. In a second set of tests, the Reynolds number was increased to 12 × 106 (at a free flow air velocity of 30 m/s) in order to simulate strong wind conditions. The aerodynamic coefficients showed a similar trend for both Reynolds numbers; however, their numerical value changed enough to indicate that simulations at the lower Reynolds number do not provide all required information. Furthermore, the variation of coefficients in the simulations allowed an explanation of how fences modified the flow around the vehicle to be proposed. This made it clear why increasing fence height reduced all the coefficients but adding an eave had an effect mainly on the lift force coefficient. Finally, by analysing the time signals it was possible to clarify the influence of the Reynolds number on the peak-to-peak amplitude, the time period and the Strouhal number.

A simplified approach to determine aerodynamic damping of railway overheads

The railway overhead (or catenary) is the system of cables responsible for providing electric current to the train. This system has been reported as wind-sensitive (Scanlon et al., 2000), and particularly to the occurrence of galloping phenomena. Galloping phenomena of the railway overhead consists of undamped cable oscillations triggered by aerodynamic forces acting on the contact wire. As is well known, aerodynamic loads on the contact wire depends on the incident flow mean velocity and the angle of attack. The presence of embankments or hills modifies both vertical velocities profiles and angles of attack of the flow (Paiva et al., 2009). The presence of these cross-wind related oscillations can interfere with the safe operation of the railway service (Johnson, 1996). Therefore a correct modelling of the phenomena is required to avoid these unwanted oscillations.

Dynamic analysis using finite elements to calculate the critical wear section of the contact wire in suburban railway overhead conductor rails

The purpose of this study is to determine the critical wear levels of the contact wire of the catenary on metropolitan lines. The study has focussed on the zones of contact wire where localised wear is produced, normally associated with the appearance of electric arcs. To this end, a finite element model has been developed to study the dynamics of pantograph-catenary interaction. The model includes a zone of localised wear and a singularity in the contact wire in order to simulate the worst case scenario from the point of view of stresses. In order to consider the different stages in the wire wear process, different depths and widths of the localised wear zone were defined. The results of the dynamic simulations performed for each stage of wear let the area of the minimum resistant section of the contact wire be determined for which stresses are greater than the allowable stress. The maximum tensile stress reached in the contact wire shows a clear sensitivity to the size of the local wear zone, defined by its width and depth. In this way, if the wear measurements taken with an overhead line recording vehicle are analysed, it will be possible to calculate the potential breakage risk of the wire. A strong dependence of the tensile forces of the contact wire has also been observed. These results will allow priorities to be set for replacing the most critical sections of wire, thereby making maintenance much more efficient. The results obtained show that the wire replacement criteria currently borne in mind have turned out to be appropriate, although in some wear scenarios these criteria could be adjusted even more, and so prolong the life cycle of the contact wire.

An example of Learning based on competences: Use of Maxima in Linear Algebra for Engineers

This paper analyzes the role of Computer Algebra Systems (CAS) in a model of learning based on competences. The proposal is an e-learning model Linear Algebra course for Engineering, which includes the use of a CAS (Maxima) and focuses on problem solving. A reference model has been taken from the Spanish Open University. The proper use of CAS is defined as an indicator of the generic ompetence: Use of Technology. Additionally, we show that using CAS could help to enhance the following generic competences: Self Learning, Planning and Organization, Communication and Writing, Mathematical and Technical Writing, Information Management and Critical Thinking.

Great marquee in the new railway station on Málaga

The commercial centre VIALIA and the new railway station of the AVE (high speed train) in Malaga was inaugurated in November 2006, just on the place of the former railway station. The new railway station with an investment of 134,7 million Euros occupies a surface of 51.377 m2, five times the surface of the former station. The enclosure is the biggest intermodal and commercial centre of Spain which comprises a parking of 21.000 m2 for 1300 parking places, one commercial area and a hotel with a total extension constructed of approximately 100.000 m2. The spaces of leisure contain cinemas, shops, restaurants, bowling, gymnasium, swimming pool and zones of passenger's traffic.

Bridges E-2 and E-3 in the new railway to the Northwest of Spain

During the years 2001 to 2007 it has been constructed in Spain the new railway line of high speed (L. H. S.)that connects Madrid with Valladolid with a length of 179.6 kilometres.

Great marquee for high-speed trains in the new railway station of Malaga

The commercial centre VIALIA and the new railway station of the AVE (high speed train) in Malaga was inaugurated in November 2006, just on the place of the former railway station. The new railway station with an investment of 134,7 million Euros occupies a surface of 51.377 m2, five times the surface of the former station. The enclosure is the biggest intermodal and commercial centre of Spain which comprises a parking of 21.000 m2 for 1300 parking places, one commercial area and a hotel with a total extension constructed of approximately 100.000 m2. The spaces of leisure contain cinemas, shops, restaurants, bowling, gymnasium, swimming pool and zones of passenger's traffic.

Great roof marquee in the new railway station for high speed trains of Málaga

The new railway station of María Zambrano for AVE (Spanish high-speed trains) located in Malaga, has been inaugurated in November 2006, just on the site of the former railway station. The new railway station with an investment of 134.7 million Euros occupies a surface of 51.377 m2, five times the surface of the former station. The enclosure is the biggest intermodal transport and commercial center of Spain which comprises a parking of 21,000 m2 for 1,300 parking places, one commercial area and a hotel of 35 m height, with a total extension constructed of approximately 100,000 m2.

Broadband access in complex environments: LTE on railway

This paper assesses the main challenges associated with the propagation and channel modeling of broadband radio systems in a complex environment of high speed and metropolitan railways. These challenges comprise practical simulation, modeling interferences, radio planning, test trials and performance evaluation in different railway scenarios using Long Term Evolution (LTE) as test case. This approach requires several steps; the first is the use of a radio propagation simulator based on ray-tracing techniques to accurately predict propagation. Besides the radio propagation simulator, a complete test bed has been constructed to assess LTE performance, channel propagation conditions and interference with other systems in real-world environments by means of standard-compliant LTE transmissions. Such measurement results allowed us to evaluate the propagation and performance of broadband signals and to test the suitability of LTE radio technology for complex railway scenarios.

Analysis of the railway track as a spatially periodic structure

This article presents a new and computationally efficient method of analysis of a railway track modelled as a continuous beam of 2N spans supported by elastic vertical springs. The main feature of this method is its important reduction in computational effort with respect to standard matrix methods of structural analysis. In this article, the whole structure is considered to be a repetition of a single one. The analysis presented is applied to a simple railway track model, i.e. to a repetitive beam supported on vertical springs (sleepers). The proposed method of analysis is based on the general theory of spatially periodic structures. The main feature of this theory is the possibility to apply Discrete Fourier Transform (DFT) in order to reduce a large system of q(2N + 1) linear stiffness equilibrium equations to a set of 2N + 1 uncoupled systems of q equations each. In this way, a dramatic reduction of the computational effort of solving the large system of equations is achieved. This fact is particularly important in the analysis of railway track structures, in which N is a very large number (around several thousands), and q = 2, the vertical displacement and rotation, is very small. The proposed method allows us to easily obtain the exact solution given by Samartín [1], i.e. the continuous beam railway track response. The comparison between the proposed method and other methods of analysis of railway tracks, such as Lorente de Nó and Zimmermann-Timoshenko, clearly shows the accuracy of the obtained results for the proposed method, even for low values of N. In addition, identical results between the proposed and the Lorente methods have been found, although the proposed method seems to be of simpler application and computationally more efficient than the Lorente one. Small but significative differences occur between these two methods and the one developed by Zimmermann-Timoshenko. This article also presents a detailed sensitivity analysis of the vertical displacement of the sleepers. Although standard matrix methods of structural analysis can handle this railway model, one of the objectives of this article is to show the efficiency of DFT method with respect to standard matrix structural analysis. A comparative analysis between standard matrix structural analysis and the proposed method (DFT), in terms of computational time, input, output and also software programming, will be carried out. Finally, a URL link to a MatLab computer program list, based on the proposed method, is given

Contribución al conocimiento de los primeros geotécnicos del siglo XX

Leyendo distintos artículos en la Revista de Obras Públicas (Jiménez Salas, 1945) uno recuerda a las grandes figuras como Coulomb (1773), Poncelet (1840), Rankine (1856), Culmann (1866), Mohr (1871), Boussinesq (1876) y otros muchos, que construyeron la base de un conocimiento que poco a poco irían facilitando la complicada tarea que suponía la construcción. Pero sus avances eran aproximaciones que presentaban notables diferencias frente al comportamiento de la naturaleza. Esas discrepancias con la naturaleza llegó un momento que se hicieron demasiado patentes. Importantes asientos en la construcción de los modernos edificios, rotura de presas de materiales sueltos y grandes corrimientos de tierras, por ejemplo durante la construcción del canal de Panamá, llevaron a la Sociedad Americana de Ingenieros Civiles (ASCE) a crear un comité que analizase las prácticas de la construcción de la época. Hechos similares se producían en Europa, por ejemplo en desmontes para ferrocarriles, que en el caso de Suecia supusieron unas cuantiosas perdidas materiales y humanas. El ingeniero austriaco-americano Karl Terzaghi (1883) había podido comprobar, en su práctica profesional, la carencia de conocimientos para afrontar muchos de los retos que la naturaleza ofrecía. Inicialmente buscó la respuesta en la geología pero encontró que ésta carecía de la definición necesaria para la práctica de la ingeniería, por lo que se lanzó a una denodada tarea investigadora basada en el método experimental. Comenzó en 1917 con escasos medios, pero pronto llegó a desarrollar algunos ensayos que le permitieron establecer los primeros conceptos de una nueva ciencia, la Mecánica de Suelos. Ciencia que ve la luz en 1925 con la publicación de su libro Erdbaumechanik auf bodenphysikalischer Grundlage. Rápidamente otras figuras empezaron a hacer sus contribuciones científicas y de divulgación, como es el caso del ingeniero austriaco-americano Arthur Casagrande (1902), cuya iniciativa de organizar el primer Congreso Internacional de Mecánica de Suelos e Ingeniería de Cimentaciones proporcionó el altavoz que necesitaba esa nueva ciencia para su difusión. Al mismo tiempo, más figuras internacionales se fueron uniendo a este período de grandes avances e innovadores puntos de vista. Figuras como Alec Skempton (1914) en el Reino Unido, Ralph Peck (1912) en los Estados Unidos o Laurits Bjerrum (1918) en Noruega sobresalieron entre los grandes de la época. Esta tesis investiga las vidas de estos geotécnicos, artífices de múltiples avances científicos de la nueva ciencia denominada Mecánica de Suelos. Todas estas grandes figuras de la geotecnia fueron presidentes, en distintos periodos, de la Sociedad Internacional de Mecánica de Suelos e Ingeniería de Cimentaciones. Se deja constancia de ello en las biografías que han sido elaboradas a partir de fuentes de variada procedencia y de los datos cruzados encontrados sobre estos extraordinarios geotécnicos. Así, las biografías de Terzaghi, Casagrande, Skempton, Peck y Bjerrum contribuyen no solo a su conocimiento individual sino que constituyen conjuntamente un punto de vista privilegiado para la comprensión de los acontecimientos vividos por la Mecánica de Suelos en el segundo tercio del siglo XX, extendiéndose en algunos casos hasta los albores del siglo XXI. Las aportaciones científicas de estos geotécnicos encuentran también su lugar en la parte técnica de esta tesis, en la que sus contribuciones individuales iniciales que configuran los distintos capítulos conservan sus puntos de vista originales, lo que permite tener una visión de los principios de la Mecánica de Suelos desde su mismo origen. On reading several articles in the journal, Revista de Obras Públicas (Jiménez Salas, 1945), one recalls such leading figures as Coulomb (1773), Poncelet (1840), Rankine (1856), Culmann (1866), Mohr (1871) and Boussinesq (1876) among many others, who created the basis of scientific knowledge that would make the complicated task of construction progressively easier. However, their advances were approximations which suffered considerable discrepancies when faced with the behaviour of the forces of nature. There came a time when such discrepancies became all too evident. Substantial soil settlements when constructing modern buildings, embankment dam failures and grave landslides, during the construction of the Panama Canal for example, led the American Society of Civil Engineers (ASCE) to form a committee in order to analyse construction practices of the time. Similar incidents had taken place in Europe, for example with railway slides, which in the case of Sweden, had resulted in heavy losses in both materials and human lives. During the practice of his career, the Austrian-American engineer Karl Terzaghi (1883) had encountered the many challenges posed by the forces of nature and the lack of knowledge at his disposal with which to overcome them. Terzaghi first sought a solution in geology only to discover that this lacked the necessary accuracy for the practice of engineering. He therefore threw himself into tireless research based on the experimental method. He began in 1917 on limited means but soon managed to develop several tests, which would allow him to establish the basic fundamentals of a new science; Soil Mechanics, a science which first saw the light of day on the publication of Terzaghi’s book, Erdbaumechanik auf bodenphysikalischer Grundlage. Other figures were quick to make their own scientific contributions. Such was the case of Austrian-American engineer, Arthur Casagrande (1902), whose initiative to organize the first International Congress of Soil Mechanics and Foundation Engineering provided the springboard that this science needed. At the same time, other international figures were becoming involved in this period of great advances and innovative concepts. Figures including the likes of Alec Skempton (1914) in the United Kingdom, Ralph Peck (1912) in the United States, and Laurits Bjerrum (1918) in Norway stood out amongst the greatest of their time. This thesis investigates the lives of these geotechnical engineers to whom we are indebted for a great many scientific advances in this new science known as Soil Mechanics. Moreover, each of these eminent figures held the presidency of the International Society of Soil Mechanics and Foundation Engineering, record of which can be found in their biographies, drawn from diverse sources, and by crosschecking and referencing all the available information on these extraordinary geotechnical engineers. Thus, the biographies of Terzaghi, Casagrande, Skempton, Peck and Bjerrum not only serve to provide knowledge on the individual, but moreover, as a collective, they present us with an exceptional insight into the important developments which took place in Soil Mechanics in the second third of the 20th century, and indeed, in some cases, up to the dawn of the 21st. The scientific contributions of these geotechnical engineers also find their place in the technical part of this thesis in which the initial individual contributions which make up several chapters retain their original approaches allowing us a view of the principles of Soil Mechanics from its very beginnings.

Vanguardias figurativas y arquitectura industrial en el período entreguerras (1918-1939)

Una de las características más interesantes que define a las Vanguardias Figurativas de comienzos del siglo XX es su fascinación por el mundo industrial como punto de ruptura con el pasado y fe en el progreso: la velocidad, la industrialización, las posibilidades de la electricidad, el maquinismo?, son elementos comunes a movimientos como el Futurismo o el Constructivismo, donde Arte, Arquitectura e Ingeniería se dan la mano en obras integradoras a medio camino entre lo utópico y lo visionario. De especial interés resulta el estudio de las obras industriales diseñadas y construidas en el período denominado de "entreguerras" (entre la Primera y la Segunda Guerra Mundial, 1918-1939), entre las que podríamos destacar los dibujos de Sant¿Elia, la presa de Klingenberg, de Poelzig y, sobre todo, los proyectos de Casto Fernández-Shaw. Este singular arquitecto ideó, entre 1918 y 1919, lo que él llamaría un "Monumento al Triunfo de la Civilización, a las Grandes Conquistas de la Idea, a las Victorias del Hombre sobre la Naturaleza, a la Paz Universal". Se trata en realidad de una gran presa (construcción que Casto asocia con el avance de la tecnología y el conocimiento humano), de aires egipcios con dos potentísimos pilonos que arrojan sendos haces de luz hacia el cielo. Aunque el proyecto nunca se llevó a cabo, estas ideas futuristas y utópicas nunca abandonarían a Casto y supondrían una notable influencia en el resto de su obra. En esta comunicación analizaremos estos interesantes ejemplos de arquitectura industrial, relacionándolos no sólo entre sí y con el resto de obras de sus autores, sino también con otros edificios construidos posteriormente pero profundamente influidos por estas corrientes vanguardistas (como la presa de Grandas de Salime, 1948-1954, de Joaquín Vaquero Palacios).