Triple-junction solar cell performance under Fresnel-based concentrators taking into account chromatic aberration and off-axis operation

Concentration photovoltaic (CPV) systems might produce quite uneven irradiance distributions (both on their level and on their spectral distribution) on the solar cell. This effect can be even more evident when the CPV system is slightly off-axis, since they are often designed to assure good uniformity only at normal incidence. The non-uniformities both in absolute irradiance and spectral content produced by the CPV systems, can originate electrical losses in multi-junction solar cells (MJSC). This works is focused on the integration of ray-tracing methods for simulating the irradiance and spectrum maps produced by different optic systems throughout the solar cell surface, with a 3D fully distributed circuit model which simulates the electrical behavior of a state-of-the-art triple-junction solar cell under the different light distributions obtained with ray-tracing. In this study four different CPV system (SILO, XTP, RTP, and FK) comprising Fresnel lenses concentrating sunlight onto the same solar cell are modeled when working on-axis and 0.6 degrees off-axis. In this study the impact of non-uniformities on a CPV system behavior is revealed. The FK outperforms other Fresnel-based CPV systems in both on-axis and off-axis conditions.

Digital Coherent Receivers and Advanced Optical Modulation Formats in 100 and 200 Gb/s DWDM Systems

Recent advances in coherent optical receivers is reviewed. Digital-Signal-Processing (DSP) based phase and polarization management techniques make coherent detection robust and feasible. With coherent detection, the complex field of the received optical signal is fully recovered, allowing compensation of linear and nonlinear optical impairments including chromatic dispersion (CD) and polarization-mode dispersion (PMD) using digital filters. Coherent detection and advanced optical modulation formats have become a key ingredient to the design of modern dense wavelength-division multiplexed (DWDM) optical broadband networks. In this paper, firstly we present the different subsystems of a digital coherent optical receiver, and secondly, we will compare the performance of some multi-level and multi-dimensional modulation formats in some physical impairments and in high spectral-efficiency (SE) and high-capacity DWDM transmissions, simulating the DSP with Matlab and the optical network performance with OptiSystem software.

Identification of pore spaces in 3D CT soil images using a PFCM partitional clustering

Recent advances in non-destructive imaging techniques, such as X-ray computed tomography (CT), make it possible to analyse pore space features from the direct visualisation from soil structures. A quantitative characterisation of the three-dimensional solid-pore architecture is important to understand soil mechanics, as they relate to the control of biological, chemical, and physical processes across scales. This analysis technique therefore offers an opportunity to better interpret soil strata, as new and relevant information can be obtained. In this work, we propose an approach to automatically identify the pore structure of a set of 200-2D images that represent slices of an original 3D CT image of a soil sample, which can be accomplished through non-linear enhancement of the pixel grey levels and an image segmentation based on a PFCM (Possibilistic Fuzzy C-Means) algorithm. Once the solids and pore spaces have been identified, the set of 200-2D images is then used to reconstruct an approximation of the soil sample by projecting only the pore spaces. This reconstruction shows the structure of the soil and its pores, which become more bounded, less bounded, or unbounded with changes in depth. If the soil sample image quality is sufficiently favourable in terms of contrast, noise and sharpness, the pore identification is less complicated, and the PFCM clustering algorithm can be used without additional processing; otherwise, images require pre-processing before using this algorithm. Promising results were obtained with four soil samples, the first of which was used to show the algorithm validity and the additional three were used to demonstrate the robustness of our proposal. The methodology we present here can better detect the solid soil and pore spaces on CT images, enabling the generation of better 2D?3D representations of pore structures from segmented 2D images.

Vortex-induced vibrations on bridges : the interaction mechanism in complex sections and a new proposed semi-empirical model

El presente trabajo de investigación se ocupa del estudio de las vibraciones verticales inducidas por vórtices (VIV) en aquellos puentes que, por sus características geométricas y propiedades dinámicas, muestran cierta sensibilidad este tipo de fenómeno aeroelástico. El objeto principal es el análisis del mecanismo de interacción viento-estructura sobre secciones no fuseladas de geometría simple, con objeto de realizar una adecuada caracterización del problema y poder abordar posteriormente el análisis de otras secciones de geometría más compleja, representativas de los principales elementos estructurales de los puentes, como arcos, tableros, torres y pilas. Este aspecto es fundamental durante la fase de diseño del puente, donde deberán tenerse en cuenta también una serie de detalles que pueden influir significativamente su sensibilidad ante problemas aerodinámicos, como la morfología y dimensiones principales de la sección transversal del tablero, la disposición de barreras de seguridad y barreras cortaviento, o las riostras que unen diferentes elementos estructurales. La configuración de dos elementos en tándem o la construcción de un puente en las inmediaciones de otro existente son otros aspectos a considerar respecto a la sensibilidad frente a efectos aeroelásticos. El estudio se ha llevado a cabo principalmente mediante la implementación de simulaciones numéricas que reproducen la interacción entre la corriente de aire y secciones representativas de modelos estructurales, a partir de un código CFD basado en el método de las partículas de vórtices (VPM), siguiendo por tanto un esquema Lagrangiano. Los resultados han sido validados con datos experimentales existentes, valores procedentes de ensayos en túnel de viento y registros reales a partir de diferentes casos de estudio: Alconétar (2006), Niterói (1980), Trans- Tokyo Bay (1995) y Volgogrado (2010). Finalmente, se propone un modelo semi-empírico para la estimación del rango de velocidades críticas y amplitudes de oscilación basado en la utilización de las derivadas de flameo de Scanlan, y la densidad espectral de las fuerzas aerodinámicas en el dominio de la frecuencia. The present research work concerns the study of vertical vortex-induced vibrations (VIV) in bridges which show certain sensitivity to this type of aeroelastic phenomenon. It focuses on the analysis of the wind-structure interaction mechanism on bluff sections, with the objective of making a good characterisation of the problem and subsequently addressing the analysis of sections with a complex geometry, which are representative of the bridge structural elements, such as arches, decks, towers and piers. This issue is of relative importance during the bridge design phase, since minor details of the aforementioned elements can significantly influence its sensitivity to aerodynamic problems. The shape and main dimensions of the deck cross section, the addition of safety barriers and windshields, the presence of braces to enhance the structure mechanical properties, the utilisation of cross sections in tandem arrangement, or the erection of a new bridge in the vicinity of another existing one are some of the aspects to be considered regarding the sensitivity to the aeroelastic effects. The study has been carried out mainly through the implementation of numerical simulations that reproduces the interaction between the airflow and the representative cross section of a structural bridge model, by the use of a CFD code based on the vortex particle method (VPM), thus following a Lagrangian scheme. The results have been validated with existing experimental data, values from wind tunnel tests and full scale observations from the different case studies: Alconétar (2006), Niterói (1980), Trans-Tokyo Bay (1995) and Volgograd (2010). Finally, a new semi-empirical model is proposed for the estimation of the critical wind velocity ranges and oscillation amplitudes based on the use of the Scanlan’s flutter derivatives and the power spectral density of aerodynamic force time history in the frequency domain.

Determination of a refractive index and an extinction coefficient of standard production of CVD-graphene

The refractive index and extinction coefficient of chemical vapour deposition grown graphene are determined by ellipsometry analysis. Graphene films were grown on copper substrates and transferred as both monolayers and bilayers onto SiO2/Si substrates by using standard manufacturing procedures. The chemical nature and thickness of residual debris formed after the transfer process were elucidated using photoelectron spectroscopy. The real layered structure so deduced has been used instead of the nominal one as the input in the ellipsometry analysis of monolayer and bilayer graphene, transferred onto both native and thermal silicon oxide. The effect of these contamination layers on the optical properties of the stacked structure is noticeable both in the visible and the ultraviolet spectral regions, thus masking the graphene optical response. Finally, the use of heat treatment under a nitrogen atmosphere of the graphene-based stacked structures, as a method to reduce the water content of the sample, and its effect on the optical response of both graphene and the residual debris layer are presented. The Lorentz-Drude model proposed for the optical response of graphene fits fairly well the experimental ellipsometric data for all the analysed graphene-based stacked structures.

Smart and sustainable public transport systems through improving level and quality of service

Buses are considered a slow, low comfort and low reliability transport system, thus its negative and por image. In the framework of the 3iBS project (2012), several examples of innovative and/or effective solutions regarding the Level of Service (LoS) were analysed aiming to provide operators, practitioners and policy makers with a set of Good Practice Guidelines to strengthen the competitiveness of the bus in the urban environment. The identification of the key indicators regarding vehicles, infrastructure and operation was possible through the analysis of a set of case studies -among which Barcelona (Spain), Cagliari (Italy), London (United Kingdom), Paris and Nantes (France). A cross comparison between the case studies was carried out for contrasting the level of achievement of the different criteria considered. The information provided on Regulatory, Financial and Technical issues allows the identification of a number of specific factors influencing the implementation of a high quality transport scheme, and set the basis for the elaboration of a set of Guidelines for the implementation of an intelligent, innovative and integrated bus system, including the main barriers to be tackled.

Desarrollo de un modelo de formación del valor inmobiliario en áreas de crecimiento suburbano. Aplicación a la comarca de la Vega Baja del Segura en el litoral alicantino

Una de las principales líneas de investigación de la economía urbana es el comportamiento del mercado inmobiliario y sus relaciones con la estructura territorial. Dentro de este contexto, la reflexión sobre el significado del valor urbano, y abordar su variabilidad, constituye un tema de especial importancia, dada la relevancia que ha supuesto y supone la actividad inmobiliaria en España. El presente estudio ha planteado como principal objetivo la identificación de aquellos factores, ligados a la localización que explican la formación del valor inmobiliario y justifican su variabilidad. Definir este proceso precisa de una evaluación a escala territorial estableciendo aquellos factores de carácter socioeconómico, medioambiental y urbanístico que estructuran el desarrollo urbano, condicionan la demanda de inmuebles y, por tanto, los procesos de formación de su valor. El análisis se centra en valores inmobiliarios residenciales localizados en áreas litorales donde la presión del sector turístico ha impulsado un amplio. Para ello, el ámbito territorial seleccionado como objeto de estudio se sitúa en la costa mediterránea española, al sur de la provincia de Alicante, la comarca de la Vega Baja del Segura. La zona, con una amplia diversidad ecológica y paisajística, ha mantenido históricamente una clara distinción entre espacio urbano y espacio rural. Esta dicotomía ha cambiado drásticamente en las últimas décadas, experimentándose un fuerte crecimiento demográfico y económico ligado a los sectores turístico e inmobiliario, aspectos que han tenido un claro reflejo en los valores inmobiliarios. Este desarrollo de la comarca es un claro ejemplo de la política expansionista de los mercados de suelo que ha tenido lugar en la costa española en las dos últimas décadas y que derivado en la regeneración de un amplio tejido suburbano. El conocimiento del marco territorial ha posibilitado realizar un análisis de variabilidad espacial mediante un tratamiento masivo de datos, así como un análisis econométrico que determina los factores que se valoran positivamente y negativamente por el potencial comprador. Estas relaciones permiten establecer diferentes estructuras matemáticas basadas en los modelos de precios hedónicos, que permiten identificar rasgos diferenciales en los ámbitos económico, social y espacial y su incidencia en el valor inmobiliario. También se ha sistematizado un proceso de valoración territorial a través del análisis del concepto de vulnerabilidad estructural, entendido como una situación de fragilidad debida a circunstancias tanto sociales como económicas, tanto actual como de tendencia en el futuro. Actualmente, esta estructura de demanda de segunda residencia y servicios ha mostrado su fragilidad y ha bloqueado el desarrollo económico de la zona al caer drásticamente la inversión en el sector inmobiliario por la crisis global de la deuda. El proceso se ha agravado al existir un tejido industrial marginal al que no se ha derivado inversiones importantes y un abandono progresivo de las explotaciones agropecuarias. El modelo turístico no sería en sí mismo la causa del bloqueo del desarrollo económico comarcal, sino la forma en que se ha implantado en la Costa Blanca, con un consumo del territorio basado en el corto plazo, poco respetuoso con aspectos paisajísticos y medioambientales, y sin una organización territorial global. Se observa cómo la vinculación entre índices de vulnerabilidad y valor inmobiliario no es especialmente significativa, lo que denota que las tendencias futuras de fragilidad no han sido incorporadas a la hora de establecer los precios de venta del producto inmobiliario analizado. El valor muestra una clara dependencia del sistema de asentamiento y conservación de las áreas medioambientales y un claro reconocimiento de tipologías propias del medio rural aunque vinculadas al sector turístico. En la actualidad, el continuo descenso de la demanda turística ha provocado una clara modificación en la estructura poblacional y económica. Al incorporar estas modificaciones a los modelos especificados podemos comprobar un verdadero desmoronamiento de los valores. Es posible que el remanente de vivienda construida actualmente vaya dirigido a un potencial comprador que se encuentra en retroceso y que se vincula a unos rasgos territoriales ya no existentes. Encontrar soluciones adaptables a la oferta existente, implica la viabilidad de renovación del sistema poblacional o modificaciones a nivel económico. La búsqueda de respuestas a estas cuestiones señala la necesidad de recanalizar el desarrollo, sin obviar la potencialidad del ámbito. SUMMARY One of the main lines of research regarding the urban economy focuses on the behavior of the real estate market and its relationship to territorial structure. Within this context, one of the most important themes involves considering the significance of urban property value and dealing with its variability, particularly given the significant role of the real estate market in Spain, both in the past and present. The main objective of this study is to identify those factors linked to location, which explain the formation of property values and justify their variability. Defining this process requires carrying out an evaluation on a territorial scale, establishing the socioeconomic, environmental and urban planning factors that constitute urban development and influence the demand for housing, thereby defining the processes by which their value is established. The analysis targets residential real estate values in coastal areas where pressure from the tourism industry has prompted large-scale transformations. Therefore, the focal point of this study is an area known as Vega Baja del Segura, which is located on the Spanish Mediterranean coast in southern Alicante (province). Characterized by its scenic and ecological diversity, this area has historically maintained a clear distinction between urban and rural spaces. This dichotomy has drastically changed in past decades due to the large increase in population attributed to the tourism and real estate markets – factors which have had a direct effect on property values. The development of this area provides a clear example of the expansionary policies which have affected the housing market on the coast of Spain during the past two decades, resulting in a large increase in suburban development. Understanding the territorial framework has made it possible to carry out a spatial variability analysis through massive data processing, as well as an econometric analysis that determines the factors that are evaluated positively and negatively by potential buyers. These relationships enable us to establish different mathematical systems based on hedonic pricing models that facilitate the identification of differential features in the economic, social and spatial spheres, and their impact on property values. Additionally, a process for land valuation was established through an analysis of the concept of structural vulnerability, which is understood to be a fragile situation resulting from either social or economic circumstances. Currently, this demand structure for second homes and services has demonstrated its fragility and has inhibited the area’s economic development as a result of the drastic fall in investment in the real estate market, due to the global debt crisis. This process has been worsened by the existence of a marginal industrial base into which no important investments have been channeled, combined with the progressive abandonment of agricultural and fishing operations. In and of itself, the tourism model did not inhibit the area’s economic development, rather it is the result of the manner in which it was implemented on the Costa Brava, with a land consumption based on the short-term, lacking respect for landscape and environmental aspects and without a comprehensive organization of the territory. It is clear that the link between vulnerability indexes and property values is not particularly significant, thereby indicating that future fragility trends have not been incorporated into the problem in terms of establishing the sale prices of the analyzed real estate product in question. Urban property values are clearly dependent on the system of development and environmental conservation, as well as on a clear recognition of the typologies that characterize rural areas, even those linked to the tourism industry. Today, the continued drop in tourism demand has provoked an obvious modification in the populational and economic structures. By incorporating these changes into the specified models, we can confirm a real collapse in values. It’s possible that the surplus of already-built homes is currently being marketed to a potential buyer who is in recession and linked to certain territorial characteristics that no longer exist. Finding solutions that can be adapted to the existing offer implies the viability of renewing the population system or carrying out modifications on an economic level. The search for answers to these questions suggests the need to reform the development model, without leaving out an area’s potentiality.

Relational and Allegorical Semantics for Constraint Logic Programming

El cálculo de relaciones binarias fue creado por De Morgan en 1860 para ser posteriormente desarrollado en gran medida por Peirce y Schröder. Tarski, Givant, Freyd y Scedrov demostraron que las álgebras relacionales son capaces de formalizar la lógica de primer orden, la lógica de orden superior así como la teoría de conjuntos. A partir de los resultados matemáticos de Tarski y Freyd, esta tesis desarrolla semánticas denotacionales y operacionales para la programación lógica con restricciones usando el álgebra relacional como base. La idea principal es la utilización del concepto de semántica ejecutable, semánticas cuya característica principal es el que la ejecución es posible utilizando el razonamiento estándar del universo semántico, este caso, razonamiento ecuacional. En el caso de este trabajo, se muestra que las álgebras relacionales distributivas con un operador de punto fijo capturan toda la teoría y metateoría estándar de la programación lógica con restricciones incluyendo los árboles utilizados en la búsqueda de demostraciones. La mayor parte de técnicas de optimización de programas, evaluación parcial e interpretación abstracta pueden ser llevadas a cabo utilizando las semánticas aquí presentadas. La demostración de la corrección de la implementación resulta extremadamente sencilla. En la primera parte de la tesis, un programa lógico con restricciones es traducido a un conjunto de términos relacionales. La interpretación estándar en la teoría de conjuntos de dichas relaciones coincide con la semántica estándar para CLP. Las consultas contra el programa traducido son llevadas a cabo mediante la reescritura de relaciones. Para concluir la primera parte, se demuestra la corrección y equivalencia operacional de esta nueva semántica, así como se define un algoritmo de unificación mediante la reescritura de relaciones. La segunda parte de la tesis desarrolla una semántica para la programación lógica con restricciones usando la teoría de alegorías—versión categórica del álgebra de relaciones—de Freyd. Para ello, se definen dos nuevos conceptos de Categoría Regular de Lawvere y _-Alegoría, en las cuales es posible interpretar un programa lógico. La ventaja fundamental que el enfoque categórico aporta es la definición de una máquina categórica que mejora e sistema de reescritura presentado en la primera parte. Gracias al uso de relaciones tabulares, la máquina modela la ejecución eficiente sin salir de un marco estrictamente formal. Utilizando la reescritura de diagramas, se define un algoritmo para el cálculo de pullbacks en Categorías Regulares de Lawvere. Los dominios de las tabulaciones aportan información sobre la utilización de memoria y variable libres, mientras que el estado compartido queda capturado por los diagramas. La especificación de la máquina induce la derivación formal de un juego de instrucciones eficiente. El marco categórico aporta otras importantes ventajas, como la posibilidad de incorporar tipos de datos algebraicos, funciones y otras extensiones a Prolog, a la vez que se conserva el carácter 100% declarativo de nuestra semántica. ABSTRACT The calculus of binary relations was introduced by De Morgan in 1860, to be greatly developed by Peirce and Schröder, as well as many others in the twentieth century. Using different formulations of relational structures, Tarski, Givant, Freyd, and Scedrov have shown how relation algebras can provide a variable-free way of formalizing first order logic, higher order logic and set theory, among other formal systems. Building on those mathematical results, we develop denotational and operational semantics for Constraint Logic Programming using relation algebra. The idea of executable semantics plays a fundamental role in this work, both as a philosophical and technical foundation. We call a semantics executable when program execution can be carried out using the regular theory and tools that define the semantic universe. Throughout this work, the use of pure algebraic reasoning is the basis of denotational and operational results, eliminating all the classical non-equational meta-theory associated to traditional semantics for Logic Programming. All algebraic reasoning, including execution, is performed in an algebraic way, to the point we could state that the denotational semantics of a CLP program is directly executable. Techniques like optimization, partial evaluation and abstract interpretation find a natural place in our algebraic models. Other properties, like correctness of the implementation or program transformation are easy to check, as they are carried out using instances of the general equational theory. In the first part of the work, we translate Constraint Logic Programs to binary relations in a modified version of the distributive relation algebras used by Tarski. Execution is carried out by a rewriting system. We prove adequacy and operational equivalence of the semantics. In the second part of the work, the relation algebraic approach is improved by using allegory theory, a categorical version of the algebra of relations developed by Freyd and Scedrov. The use of allegories lifts the semantics to typed relations, which capture the number of logical variables used by a predicate or program state in a declarative way. A logic program is interpreted in a _-allegory, which is in turn generated from a new notion of Regular Lawvere Category. As in the untyped case, program translation coincides with program interpretation. Thus, we develop a categorical machine directly from the semantics. The machine is based on relation composition, with a pullback calculation algorithm at its core. The algorithm is defined with the help of a notion of diagram rewriting. In this operational interpretation, types represent information about memory allocation and the execution mechanism is more efficient, thanks to the faithful representation of shared state by categorical projections. We finish the work by illustrating how the categorical semantics allows the incorporation into Prolog of constructs typical of Functional Programming, like abstract data types, and strict and lazy functions.

Modelización del registro y proceso de datos espectrales, referidos a superficies líticas, en un ámbito arqueológico.

La determinación del origen de un material utilizado por el hombre en la prehistoria es de suma importancia en el ámbito de la arqueología. En los últimos años, los estudios de procedencia han utilizado técnicas que suelen ser muy precisas pero con el inconveniente de ser metodologías de carácter destructivo. El fenómeno de la minería a gran escala es una de las características que acompaña al Neolítico, de ahí que la revolución correspondiente a este periodo sea una de las etapas más importantes para la humanidad. El yacimiento arqueológico de Casa Montero es una mina de sílex neolítica ubicada en la Península Ibérica, de gran importancia por su antigüedad y su escala productiva. Este sitio arqueológico corresponde a una cantera de explotación de rocas silícicas desarrollada en el periodo neolítico en la que solamente se han encontrado los desechos de la extracción minera, lo cual incrementa la variabilidad de las muestras analizadas, de las que se desconoce su contexto económico, social y cultural. Es de gran interés arqueológico saber por qué esos grupos neolíticos explotaban de forma tan intensiva determinados tipos de material y cuál era el destino de la cadena productiva del sílex. Además, por ser una excavación de rescate, que ha tenido que procesar varias toneladas de material, en un tiempo relativamente corto, requiere de métodos expeditivos de clasificación y manejo de dicho material. Sin embargo,la implementación de cualquier método de clasificación debe evitar la alteración o modificación de la muestra,ya que,estudios previos sobre caracterización de rocas silícicas tienen el inconveniente de alterar parcialmente el objeto de estudio. Por lo que el objetivo de esta investigación fue la modelización del registro y procesamiento de datos espectrales adquiridos de rocas silícicas del yacimiento arqueológico de Casa Montero. Se implementó la metodología para el registro y procesamiento de datos espectrales de materiales líticos dentro del contexto arqueológico. Lo anterior se ha conseguido con la aplicación de modelos de análisis espectral, algoritmos de suavizado de firmas espectrales, reducción de la dimensionalidad de las características y la aplicación de métodos de clasificación, tanto de carácter vectorial como raster. Para la mayoría de los procedimientos se ha desarrollado una aplicación informática validada tanto por los propios resultados obtenidos como comparativamente con otras aplicaciones. Los ensayos de evaluación de la metodología propuesta han permitido comprobar la eficacia de los métodos. Por lo que se concluye que la metodología propuesta no solo es útil para materiales silícicos, sino que se puede generalizar en aquellos procesos donde la caracterización espectral puede ser relevante para la clasificación de materiales que no deban ser alterados, además, permite aplicarla a gran escala, dado que los costes de ejecución son mínimos si se comparan con los de métodos convencionales. Así mismo, es de destacar que los métodos propuestos, representan la variabilidad del material y permiten relacionarla con el estado del yacimiento, según su contenido respecto de las tipologías de la cadena operativa. ABSTRACT: The determination of the origin of a material used by man in prehistory is very important in the field of archaeology. In recent years the provenance studies have used techniques that tend to be very precise but with the drawback of being destructive methodologies. The phenomenon of mining on a large scale is a feature that accompanies the Neolithic period; the Neolithic revolution is one of the most important periods of humanity. The archaeological site of Casa Montero is a Neolithic flint mine located in the Iberian Peninsula of great importance for its antiquity and its scale. This archaeological site corresponds to a quarry exploitation of silicic rocks developed in the Neolithic period, in which only found debris from mining, which increases the variability of the samples analyzed, including their economic, social and cultural context is unknown. It is of great archaeological interest to know why these Neolithic groups exploited as intensive certain types of material and what the final destination of flint was in the productive chain. In addition, being an excavation of rescue that had to process several tons of material in a relatively short time requires expeditious methods of classification and handling of the material. However, the implementation of any method of classification should avoid the alteration or modification of the sample, since previous studies on characterization of silicic rocks have the disadvantage of destroying or partially modify the object of study. So the objective of this research wasthe modeling of the registration and processing of acquired spectral data of silicic rocks of the archaeological site of Casa Montero. The methodology implemented for modeling the registration and processing of existing spectral data of lithic materials within the archaeological context, was presented as an alternative to the conventional classification methods (methods destructive and expensive) or subjective methods that depend on the experience of the expert. The above has been achieved with the implementation of spectral analysis models, smoothing of spectral signatures and the dimensionality reduction algorithms. Trials of validation of the proposed methodology allowed testing the effectiveness of the methods in what refers to the spectral characterization of siliceous materials of Casa Montero. Is remarkable the algorithmic contribution of the signal filtering, improve of quality and reduction of the dimensionality, as well the proposal of using raster structures for efficient storage and analysis of spectral information. For which it is concluded that the proposed methodology is not only useful for siliceous materials, but it can be generalized in those processes where spectral characterization may be relevant to the classification of materials that must not be altered, also allows to apply it on a large scale, given that the implementation costs are minimal when compared with conventional methods.

Characterization of an 241AmBe neutron irradiation facility by different spectrometric techniques

An automated panoramic irradiator with a 3 Ci 241Am-Be neutron source is installed in a bunker-type large room at the Universidad Politécnica de Madrid (UPM). It was recently modified and a neutron spectrometry campaign was organized to characterize the neutron fields in different measurement points along the irradiation bench. Four research groups working with different Bonner Sphere Spectrometers (BSS) and using different spectral unfolding codes took part to this exercise. INFN-LNF used a BSS formed by 9 spheres plus bare detector, with cylindrical, almost point like, 6LiI(Eu) scintillator (4 mm x 4 mm, from Ludlum); UAZ-UPM employed a similar system but with only 6 spheres plus bare detector; UAB worked with a 3He filled proportional counter at 8kPa filling pressure, cylindrical 9 mm x 10 mm (05NH1 from Eurisys) with 11 spheres configuration; and CIEMAT used 12 spheres with an spherical 3He SP9 counter (Centronic Ltd., UK) with very high sensitivity due to the large diameter (3.2 cm) and the filling pressure of the order of 228 kPa. Each group applied a different spectral unfolding method: INFN and UAB worked with FRUIT ver. 3.0 with their own response matrixes; UAZ-UPM used the BUNKIUT unfolding code with the response matrix UTA4 and CIEMAT employed the GRAVEL-MAXED-IQU package with their own response matrix. The paper shows the main results obtained in terms of neutron spectra at fixed distances from the source as well as total neutron fluence rate and ambient dose equivalent rate H*(10) determined from the spectra. The latter are compared with the readings of a common active survey-meter (LB 6411). The small differences in the results of the various groups are discussed.

Brain dynamics of mild cognitive impairment during face encoding

Brain oscillations are closely correlated with human information processing and fundamental aspects of cognition. Previous literature shows that due to the relation between brain oscillations and memory processes, spectral dynamics during such tasks are good candidates to study and characterize memory related pathologies. Mild cognitive impairment (MCI), defined as a clinical condition characterized by memory impairment and/ or deterioration of additional cognitive domains, is considered a preliminary stage in the dementia process. In consequence, the study of its brain patterns could help to achieve an early diagnosis of Alzheimer Disease.

La videovigilancia : tecnologías actuales y aspectos sociopolíticos

En este Proyecto de fin de carrera titulado: LA VÍDEOVIGILANCIA: TECNOLOGÍAS ACTUALES Y ASPECTOS SOCIOPOLÍTICOS, tiene como objetivo hacer un estudio en los sistemas de Vídeovigilancia basado en cámaras-IP, con fines de seguridad, control o supervisión. Nos basaremos en exponer los sistemas Vídeovigilancia basados en cámara-IP actuales de ultima generación, cuya principal virtud de estos sistemas, es la comunicación con otros lugares, o espacios públicos como privados y poder visualizar tanto en vivo como en diferido lo que este pasando en ese lugar y en ese momento o haya pasado a través del protocolo de comunicación-IP. Se explicara desde el más básico al más complejo sistema de videovigilancia-IP, también explicaremos su puesta en practica mediante los múltiples interconexiones que estos conlleven. Llegando a este punto, se nos plantea las siguientes cuestiones que da origen a este PFC. Estos sistemas de Vídeovigilancia-IP, captan las imágenes por medio de las cámaras-IP, proporcionando su facilidad tanto de visionado/grabacion, como de control, ya que no es necesario estar presente e interactuando con otros sistemas digitales de diverso índole actuales, gracias al protocolo-IP. Estos sistemas-IP, tienen su puesta en práctica mediante las instalaciones requeridas ,estas podrán ser sencillas o muy complejas de todos los sistemas-IP. Debido al gran aumento masivo, las tecnologías actuales de diverso índole de cámaras-IP en materia de la vídeovigilancia en lugares públicos, y privados en nuestra sociedad actual, lo hace un medio particularmente invasivo y por ello resulta necesario tanto la concurrencia de condiciones que legitimen los tratamientos de datos de personas identificables, como la definición de los principios y garantías que deban aplicarse ya que estas, repercutirán sobre los derechos de las personas, lo que obligara a fijar ciertas garantías. Se nos plantea los casos en los que la captación y/o tratamiento de imágenes con fines de Vídeovigilancia que pertenezcan a personas identificadas o identificables, ha obligado a España, y según dispuesto por la Directiva 95/46/CE del Parlamento Europeo, a regularizar esta situación mediante la Ley Orgánica de Protección de Datos (LOPD) 15/1999 de 13 de diciembre, bajo los procedimientos del Estado español en materia sociopolítica, y dando vigor a esta ley, mediante la aprobación de la Instrucción 1/2006 de 8 de noviembre de 2006, cuyo máximo organismo es la Agencia española de Protección de Datos (AGPD). Una vez planteada la motivación y justificación del proyecto, se derivan unos objetivos a cumplir con la realización del mismo. Los objetivos del proyecto se pueden diferenciar en dos clases principalmente. Los objetivos principales y objetivos secundarios. Los objetivos principales de este PFC, nacen directamente de las necesidades planteadas originalmente en materia de Vídeovigilancia, tanto tecnológicamente basado en las cámaras-IP en la captación y/o tratamiento de imágenes, así como sociopolíticamente donde trataremos de describirlo mediante las indicaciones y criterios con casos prácticos y de cómo deben de aplicarse según la instrucción 1/2006 mediante la LOPD en materia de Vídeovigilancia, en cuanto a la protección de datos que puedan repercutir sobre el derecho de las personas. Por otra parte los objetivos secundarios, son la extensión del objetivo primario y son de orden cuantificador en este PFC, dando una explicación más exhaustiva del objetivo principal. ABSTRACT In this final year project, entitled: THE VIDEOSURVEILLANCE: CURRENT TECHNOLOGIES AND POLITICALSOCIALS ASPECTS, aims to make a study of video surveillance systems based on IP cameras, for security, control or supervision. We will rely on to expose the camera based video surveillance systems IP-current last generation, whose main virtue of these systems, is communication with other places, or public and private spaces and to view both live and time so this happening in that place and at that time or passed through-IP communication protocol. He explained from the most basic to the most complex-IP video surveillance system, also explain its implementation into practice through multiple interconnections that these entail. Arriving at this point, we face the following issues which gave rise to this PFC. These IP-video surveillance systems, captured images through IP-cameras, providing both ease of viewing / recording, as a control, since it is not necessary to be present and interacting with other digital systems such diverse today, thanks IP-protocol. These systems-IP, have their implementation through the facilities required, these can be simple or very complex all-IP video surveillance systems. Due to the large increase in mass, current technologies of different kinds of IP cameras for video surveillance in public places, and private in our society, it makes a particularly invasive and therefore attendance is necessary both conditions that legitimize data processing of identifiable people, as the definition of the principles and safeguards to be applied as these will impact on the rights of the people, which forced to set certain guarantees. We face those cases in which the uptake and / or image processing video surveillance purposes belonging to identified or identifiable, has forced Spain, and as required by Directive 95/46/EC of the European Parliament, to regularize this situation by the Organic Law on Data Protection (LOPD) 15/1999 of December 13, under the procedures of the Spanish State in sociopolitical, and giving effect to this Act, with the approval of the Instruction 1/2006 of 8 November 2006, the governing body is the Spanish Agency for Data Protection (AGPD). Once raised the motivation and justification for the project, resulting in meeting targets to achieve the same. Project objectives can be differentiated into two main classes, the main objectives and secondary objectives: The main objectives of this PFC, born directly from requirements originally raised for capturing both technologically imaging me and try to describe where sociopolitically, the details and criteria as case studies and should be applied according to the instruction 1 / 2006 by the LOPD on video surveillance system in terms of data protection that could impact on the right people. Moreover the secondary objectives are the extension of the primary and are of a quantifier in this PFC, giving a fuller explanation of the main objective.

An integrated framework for office information systems design and management

Information Technologies are complex and this is true even in the smallest piece of equipment. But this kind of complexity is nothing comparejwith the one that arises when this technology interact with society. Office Automation has been traditionally considered as a technical field but there is no way to find solutions from a technical point of view when the problems are primarily social in their origin. Technology management has to change its focus from a pure technical perspective to a sociotechnical point of view. To facilitate this change, we propose a model that allows a better understanding between the managerial and the technical world, offering a coherent, complete and integrated perspective of both. The base for this model is an unfolding of the complexity found in information Technologies and a matching of these complexities with several levels considered within the Office, Office Automation and Human Factors dimensions. Each one of these domains is studied trough a set of distinctions that create a new and powerful understanding of its reality. Using this model we build up a map of Office Automation to be use^not only by managers but also by technicians because the primaty advantage of such a framework is that it allows a comprehensive evaluation of technology without requhing extensive technical knowledge. Thus, the model can be seen as principle for design and diagnosis of Office Automation and as a common reference for managers and specialist avoiding the severe limitations arising from the language used by the last

Detección de patrones y anomalías espectrales del terreno mediante espectrometría de imagen de alta resolución : reconocimiento, optimización y evaluación multiescenario

El objeto de esta Tesis doctoral es el desarrollo de una metodologia para la deteccion automatica de anomalias a partir de datos hiperespectrales o espectrometria de imagen, y su cartografiado bajo diferentes condiciones tipologicas de superficie y terreno. La tecnologia hiperespectral o espectrometria de imagen ofrece la posibilidad potencial de caracterizar con precision el estado de los materiales que conforman las diversas superficies en base a su respuesta espectral. Este estado suele ser variable, mientras que las observaciones se producen en un numero limitado y para determinadas condiciones de iluminacion. Al aumentar el numero de bandas espectrales aumenta tambien el numero de muestras necesarias para definir espectralmente las clases en lo que se conoce como Maldicion de la Dimensionalidad o Efecto Hughes (Bellman, 1957), muestras habitualmente no disponibles y costosas de obtener, no hay mas que pensar en lo que ello implica en la Exploracion Planetaria. Bajo la definicion de anomalia en su sentido espectral como la respuesta significativamente diferente de un pixel de imagen respecto de su entorno, el objeto central abordado en la Tesis estriba primero en como reducir la dimensionalidad de la informacion en los datos hiperespectrales, discriminando la mas significativa para la deteccion de respuestas anomalas, y segundo, en establecer la relacion entre anomalias espectrales detectadas y lo que hemos denominado anomalias informacionales, es decir, anomalias que aportan algun tipo de informacion real de las superficies o materiales que las producen. En la deteccion de respuestas anomalas se asume un no conocimiento previo de los objetivos, de tal manera que los pixeles se separan automaticamente en funcion de su informacion espectral significativamente diferenciada respecto de un fondo que se estima, bien de manera global para toda la escena, bien localmente por segmentacion de la imagen. La metodologia desarrollada se ha centrado en la implicacion de la definicion estadistica del fondo espectral, proponiendo un nuevo enfoque que permite discriminar anomalias respecto fondos segmentados en diferentes grupos de longitudes de onda del espectro, explotando la potencialidad de separacion entre el espectro electromagnetico reflectivo y emisivo. Se ha estudiado la eficiencia de los principales algoritmos de deteccion de anomalias, contrastando los resultados del algoritmo RX (Reed and Xiaoli, 1990) adoptado como estandar por la comunidad cientifica, con el metodo UTD (Uniform Targets Detector), su variante RXD-UTD, metodos basados en subespacios SSRX (Subspace RX) y metodo basados en proyecciones de subespacios de imagen, como OSPRX (Orthogonal Subspace Projection RX) y PP (Projection Pursuit). Se ha desarrollado un nuevo metodo, evaluado y contrastado por los anteriores, que supone una variacion de PP y describe el fondo espectral mediante el analisis discriminante de bandas del espectro electromagnetico, separando las anomalias con el algortimo denominado Detector de Anomalias de Fondo Termico o DAFT aplicable a sensores que registran datos en el espectro emisivo. Se han evaluado los diferentes metodos de deteccion de anomalias en rangos del espectro electromagnetico del visible e infrarrojo cercano (Visible and Near Infrared-VNIR), infrarrojo de onda corta (Short Wavelenght Infrared-SWIR), infrarrojo medio (Meadle Infrared-MIR) e infrarrojo termico (Thermal Infrared-TIR). La respuesta de las superficies en las distintas longitudes de onda del espectro electromagnetico junto con su entorno, influyen en el tipo y frecuencia de las anomalias espectrales que puedan provocar. Es por ello que se han utilizado en la investigacion cubos de datos hiperepectrales procedentes de los sensores aeroportados cuya estrategia y diseno en la construccion espectrometrica de la imagen difiere. Se han evaluado conjuntos de datos de test de los sensores AHS (Airborne Hyperspectral System), HyMAP Imaging Spectrometer, CASI (Compact Airborne Spectrographic Imager), AVIRIS (Airborne Visible Infrared Imaging Spectrometer), HYDICE (Hyperspectral Digital Imagery Collection Experiment) y MASTER (MODIS/ASTER Simulator). Se han disenado experimentos sobre ambitos naturales, urbanos y semiurbanos de diferente complejidad. Se ha evaluado el comportamiento de los diferentes detectores de anomalias a traves de 23 tests correspondientes a 15 areas de estudio agrupados en 6 espacios o escenarios: Urbano - E1, Semiurbano/Industrial/Periferia Urbana - E2, Forestal - E3, Agricola - E4, Geologico/Volcanico - E5 y Otros Espacios Agua, Nubes y Sombras - E6. El tipo de sensores evaluados se caracteriza por registrar imagenes en un amplio rango de bandas, estrechas y contiguas, del espectro electromagnetico. La Tesis se ha centrado en el desarrollo de tecnicas que permiten separar y extraer automaticamente pixeles o grupos de pixeles cuya firma espectral difiere de manera discriminante de las que tiene alrededor, adoptando para ello como espacio muestral parte o el conjunto de las bandas espectrales en las que ha registrado radiancia el sensor hiperespectral. Un factor a tener en cuenta en la investigacion ha sido el propio instrumento de medida, es decir, la caracterizacion de los distintos subsistemas, sensores imagen y auxiliares, que intervienen en el proceso. Para poder emplear cuantitativamente los datos medidos ha sido necesario definir las relaciones espaciales y espectrales del sensor con la superficie observada y las potenciales anomalias y patrones objetivos de deteccion. Se ha analizado la repercusion que en la deteccion de anomalias tiene el tipo de sensor, tanto en su configuracion espectral como en las estrategias de diseno a la hora de registrar la radiacion prodecente de las superficies, siendo los dos tipos principales de sensores estudiados los barredores o escaneres de espejo giratorio (whiskbroom) y los barredores o escaneres de empuje (pushbroom). Se han definido distintos escenarios en la investigacion, lo que ha permitido abarcar una amplia variabilidad de entornos geomorfologicos y de tipos de coberturas, en ambientes mediterraneos, de latitudes medias y tropicales. En resumen, esta Tesis presenta una tecnica de deteccion de anomalias para datos hiperespectrales denominada DAFT en su variante de PP, basada en una reduccion de la dimensionalidad proyectando el fondo en un rango de longitudes de onda del espectro termico distinto de la proyeccion de las anomalias u objetivos sin firma espectral conocida. La metodologia propuesta ha sido probada con imagenes hiperespectrales reales de diferentes sensores y en diferentes escenarios o espacios, por lo tanto de diferente fondo espectral tambien, donde los resultados muestran los beneficios de la aproximacion en la deteccion de una gran variedad de objetos cuyas firmas espectrales tienen suficiente desviacion respecto del fondo. La tecnica resulta ser automatica en el sentido de que no hay necesidad de ajuste de parametros, dando resultados significativos en todos los casos. Incluso los objetos de tamano subpixel, que no pueden distinguirse a simple vista por el ojo humano en la imagen original, pueden ser detectados como anomalias. Ademas, se realiza una comparacion entre el enfoque propuesto, la popular tecnica RX y otros detectores tanto en su modalidad global como local. El metodo propuesto supera a los demas en determinados escenarios, demostrando su capacidad para reducir la proporcion de falsas alarmas. Los resultados del algoritmo automatico DAFT desarrollado, han demostrado la mejora en la definicion cualitativa de las anomalias espectrales que identifican a entidades diferentes en o bajo superficie, reemplazando para ello el modelo clasico de distribucion normal con un metodo robusto que contempla distintas alternativas desde el momento mismo de la adquisicion del dato hiperespectral. Para su consecucion ha sido necesario analizar la relacion entre parametros biofisicos, como la reflectancia y la emisividad de los materiales, y la distribucion espacial de entidades detectadas respecto de su entorno. Por ultimo, el algoritmo DAFT ha sido elegido como el mas adecuado para sensores que adquieren datos en el TIR, ya que presenta el mejor acuerdo con los datos de referencia, demostrando una gran eficacia computacional que facilita su implementacion en un sistema de cartografia que proyecte de forma automatica en un marco geografico de referencia las anomalias detectadas, lo que confirma un significativo avance hacia un sistema en lo que se denomina cartografia en tiempo real. The aim of this Thesis is to develop a specific methodology in order to be applied in automatic detection anomalies processes using hyperspectral data also called hyperspectral scenes, and to improve the classification processes. Several scenarios, areas and their relationship with surfaces and objects have been tested. The spectral characteristics of reflectance parameter and emissivity in the pattern recognition of urban materials in several hyperspectral scenes have also been tested. Spectral ranges of the visible-near infrared (VNIR), shortwave infrared (SWIR) and thermal infrared (TIR) from hyperspectral data cubes of AHS (Airborne Hyperspectral System), HyMAP Imaging Spectrometer, CASI (Compact Airborne Spectrographic Imager), AVIRIS (Airborne Visible Infrared Imaging Spectrometer), HYDICE (Hyperspectral Digital Imagery Collection Experiment) and MASTER (MODIS/ASTER Simulator) have been used in this research. It is assumed that there is not prior knowledge of the targets in anomaly detection. Thus, the pixels are automatically separated according to their spectral information, significantly differentiated with respect to a background, either globally for the full scene, or locally by the image segmentation. Several experiments on different scenarios have been designed, analyzing the behavior of the standard RX anomaly detector and different methods based on subspace, image projection and segmentation-based anomaly detection methods. Results and their consequences in unsupervised classification processes are discussed. Detection of spectral anomalies aims at extracting automatically pixels that show significant responses in relation of their surroundings. This Thesis deals with the unsupervised technique of target detection, also called anomaly detection. Since this technique assumes no prior knowledge about the target or the statistical characteristics of the data, the only available option is to look for objects that are differentiated from the background. Several methods have been developed in the last decades, allowing a better understanding of the relationships between the image dimensionality and the optimization of search procedures as well as the subpixel differentiation of the spectral mixture and its implications in anomalous responses. In other sense, image spectrometry has proven to be efficient in the characterization of materials, based on statistical methods using a specific reflection and absorption bands. Spectral configurations in the VNIR, SWIR and TIR have been successfully used for mapping materials in different urban scenarios. There has been an increasing interest in the use of high resolution data (both spatial and spectral) to detect small objects and to discriminate surfaces in areas with urban complexity. This has come to be known as target detection which can be either supervised or unsupervised. In supervised target detection, algorithms lean on prior knowledge, such as the spectral signature. The detection process for matching signatures is not straightforward due to the complications of converting data airborne sensor with material spectra in the ground. This could be further complicated by the large number of possible objects of interest, as well as uncertainty as to the reflectance or emissivity of these objects and surfaces. An important objective in this research is to establish relationships that allow linking spectral anomalies with what can be called informational anomalies and, therefore, identify information related to anomalous responses in some places rather than simply spotting differences from the background. The development in recent years of new hyperspectral sensors and techniques, widen the possibilities for applications in remote sensing of the Earth. Remote sensing systems measure and record electromagnetic disturbances that the surveyed objects induce in their surroundings, by means of different sensors mounted on airborne or space platforms. Map updating is important for management and decisions making people, because of the fast changes that usually happen in natural, urban and semi urban areas. It is necessary to optimize the methodology for obtaining the best from remote sensing techniques from hyperspectral data. The first problem with hyperspectral data is to reduce the dimensionality, keeping the maximum amount of information. Hyperspectral sensors augment considerably the amount of information, this allows us to obtain a better precision on the separation of material but at the same time it is necessary to calculate a bigger number of parameters, and the precision lowers with the increase in the number of bands. This is known as the Hughes effects (Bellman, 1957) . Hyperspectral imagery allows us to discriminate between a huge number of different materials however some land and urban covers are made up with similar material and respond similarly which produces confusion in the classification. The training and the algorithm used for mapping are also important for the final result and some properties of thermal spectrum for detecting land cover will be studied. In summary, this Thesis presents a new technique for anomaly detection in hyperspectral data called DAFT, as a PP's variant, based on dimensionality reduction by projecting anomalies or targets with unknown spectral signature to the background, in a range thermal spectrum wavelengths. The proposed methodology has been tested with hyperspectral images from different imaging spectrometers corresponding to several places or scenarios, therefore with different spectral background. The results show the benefits of the approach to the detection of a variety of targets whose spectral signatures have sufficient deviation in relation to the background. DAFT is an automated technique in the sense that there is not necessary to adjust parameters, providing significant results in all cases. Subpixel anomalies which cannot be distinguished by the human eye, on the original image, however can be detected as outliers due to the projection of the VNIR end members with a very strong thermal contrast. Furthermore, a comparison between the proposed approach and the well-known RX detector is performed at both modes, global and local. The proposed method outperforms the existents in particular scenarios, demonstrating its performance to reduce the probability of false alarms. The results of the automatic algorithm DAFT have demonstrated improvement in the qualitative definition of the spectral anomalies by replacing the classical model by the normal distribution with a robust method. For their achievement has been necessary to analyze the relationship between biophysical parameters such as reflectance and emissivity, and the spatial distribution of detected entities with respect to their environment, as for example some buried or semi-buried materials, or building covers of asbestos, cellular polycarbonate-PVC or metal composites. Finally, the DAFT method has been chosen as the most suitable for anomaly detection using imaging spectrometers that acquire them in the thermal infrared spectrum, since it presents the best results in comparison with the reference data, demonstrating great computational efficiency that facilitates its implementation in a mapping system towards, what is called, Real-Time Mapping.

Horizontal visibility graphs generated by type-I intermittency

The type-I intermittency route to (or out of) chaos is investigated within the horizontal visibility (HV) graph theory. For that purpose, we address the trajectories generated by unimodal maps close to an inverse tangent bifurcation and construct their associatedHVgraphs.We showhowthe alternation of laminar episodes and chaotic bursts imprints a fingerprint in the resulting graph structure. Accordingly, we derive a phenomenological theory that predicts quantitative values for several network parameters. In particular, we predict that the characteristic power-law scaling of the mean length of laminar trend sizes is fully inherited by the variance of the graph degree distribution, in good agreement with the numerics. We also report numerical evidence on how the characteristic power-law scaling of the Lyapunov exponent as a function of the distance to the tangent bifurcation is inherited in the graph by an analogous scaling of block entropy functionals defined on the graph. Furthermore, we are able to recast the full set of HV graphs generated by intermittent dynamics into a renormalization-group framework, where the fixed points of its graph-theoretical renormalization-group flow account for the different types of dynamics.We also establish that the nontrivial fixed point of this flow coincides with the tangency condition and that the corresponding invariant graph exhibits extremal entropic properties.