Optimization of the irrigation time and irrigation frequency by using Hydrus-2D and a capacitance FDR sensor

The evolution of water content on a sandy soil during the sprinkler irrigation campaign, in the summer of 2010, of a field of sugar beet crop located at Valladolid (Spain) is assessed by a capacitive FDR (Frequency Domain Reflectometry) EnviroScan. This field is one of the experimental sites of the Spanish research center for the sugar beet development (AIMCRA). The objective of the work focus on monitoring the soil water content evolution of consecutive irrigations during the second two weeks of July (from the 12th to the 28th). These measurements will be used to simulate water movement by means of Hydrus-2D. The water probe logged water content readings (m3/m3) at 10, 20, 40 and 60 cm depth every 30 minutes. The probe was placed between two rows in one of the typical 12 x 15 m sprinkler irrigation framework. Furthermore, a texture analysis at the soil profile was also conducted. The irrigation frequency in this farm was set by the own personal farmer 0 s criteria that aiming to minimizing electricity pumping costs, used to irrigate at night and during the weekend i.e. longer irrigation frequency than expected. However, the high evapotranspiration rates and the weekly sugar beet water consumption—up to 50mm/week—clearly determined the need for lower this frequency. Moreover, farmer used to irrigate for six or five hours whilst results from the EnviroScan probe showed the soil profile reaching saturation point after the first three hours. It must be noted that AIMCRA provides to his members with a SMS service regarding weekly sugar beet water requirement; from the use of different meteorological stations and evapotranspiration pans, farmers have an idea of the weekly irrigation needs. Nevertheless, it is the farmer 0 s decision to decide how to irrigate. Thus, in order to minimize water stress and pumping costs, a suitable irrigation time and irrigation frequency was modeled with Hydrus-2D. Results for the period above mentioned showed values of water content ranging from 35 and 30 (m3/m3) for the first 10 and 20cm profile depth (two hours after irrigation) to the minimum 14 and 13 (m3/m3) ( two hours before irrigation). For the 40 and 60 cm profile depth, water content moves steadily across the dates: The greater the root activity the greater the water content variation. According to the results in the EnviroScan probe and the modeling in Hydrus-2D, shorter frequencies and irrigation times are suggested.

Time-frequency characterization of a sound propagation channel as an educational tool

This paper discusses the use of sound waves to illustrate multipath radio propagation concepts. Specifically, a procedure is presented to measure the time-varying frequency response of the channel. This helps demonstrate how a propagation channel can be characterized in time and frequency, and provides visualizations of the concepts of coherence time and coherence bandwidth. The measurements are very simple to carry out, and the required equipment is easily available. The proposed method can be useful for wireless or mobile communication courses.

Time and space partition platform for safe and secure flight software.

There are a number of research and development activities that are exploring Time and Space Partition (TSP) to implement safe and secure flight software. This approach allows to execute different real-time applications with different levels of criticality in the same computer board. In order to do that, flight applications must be isolated from each other in the temporal and spatial domains. This paper presents the first results of a partitioning platform based on the Open Ravenscar Kernel (ORK+) and the XtratuM hypervisor. ORK+ is a small, reliable real-time kernel supporting the Ada Ravenscar Computational model that is central to the ASSERT development process. XtratuM supports multiple virtual machines, i.e. partitions, on a single computer and is being used in the Integrated Modular Avionics for Space study. ORK+ executes in an XtratuM partition enabling Ada applications to share the computer board with other applications.

HERMES: Towards an Integrated Toolbox to Characterize Functional and Effective Brain Connectivity

The analysis of the interdependence between time series has become an important field of research in the last years, mainly as a result of advances in the characterization of dynamical systems from the signals they produce, the introduction of concepts such as generalized and phase synchronization and the application of information theory to time series analysis. In neurophysiology, different analytical tools stemming from these concepts have added to the ‘traditional’ set of linear methods, which includes the cross-correlation and the coherency function in the time and frequency domain, respectively, or more elaborated tools such as Granger Causality. This increase in the number of approaches to tackle the existence of functional (FC) or effective connectivity (EC) between two (or among many) neural networks, along with the mathematical complexity of the corresponding time series analysis tools, makes it desirable to arrange them into a unified-easy-to-use software package. The goal is to allow neuroscientists, neurophysiologists and researchers from related fields to easily access and make use of these analysis methods from a single integrated toolbox. Here we present HERMES (http://hermes.ctb.upm.es), a toolbox for the Matlab® environment (The Mathworks, Inc), which is designed to study functional and effective brain connectivity from neurophysiological data such as multivariate EEG and/or MEG records. It includes also visualization tools and statistical methods to address the problem of multiple comparisons. We believe that this toolbox will be very helpful to all the researchers working in the emerging field of brain connectivity analysis.

Time and space partitioning the EagleEye reference mission

We discuss experiences gained by porting a Software Validation Facility (SVF) and a satellite Central Software (CSW) to a platform with support for Time and Space Partitioning (TSP). The SVF and CSW are part of the EagleEye Reference mission of the European Space Agency (ESA). As a reference mission, EagleEye is a perfect candidate to evaluate practical aspects of developing satellite CSW for and on TSP platforms. The specific TSP platform we used consists of a simulate D LEON3 CPU controlled by the XtratuM separation micro-kernel. On top of this, we run five separate partitions. Each partition ru n s its own real-time operating system or Ada run-time kernel, which in turn are running the application software of the CSW. We describe issues related to partitioning; inter-partition communication; scheduling; I/O; and fault-detection, isolation, and recovery (FDIR)

HERMES: towards an integrated toolbox to characterize functional and effective brain connectivity

The analysis of the interdependence between time series has become an important field of research in the last years, mainly as a result of advances in the characterization of dynamical systems from the signals they produce, the introduction of concepts such as generalized and phase synchronization and the application of information theory to time series analysis. In neurophysiology, different analytical tools stemming from these concepts have added to the ?traditional? set of linear methods, which includes the cross-correlation and the coherency function in the time and frequency domain, respectively, or more elaborated tools such as Granger Causality. This increase in the number of approaches to tackle the existence of functional (FC) or effective connectivity (EC) between two (or among many) neural networks, along with the mathematical complexity of the corresponding time series analysis tools, makes it desirable to arrange them into a unified, easy-to-use software package. The goal is to allow neuroscientists, neurophysiologists and researchers from related fields to easily access and make use of these analysis methods from a single integrated toolbox. Here we present HERMES (http://hermes.ctb.upm.es), a toolbox for the Matlab® environment (The Mathworks, Inc), which is designed to study functional and effective brain connectivity from neurophysiological data such as multivariate EEG and/or MEG records. It includes also visualization tools and statistical methods to address the problem of multiple comparisons. We believe that this toolbox will be very helpful to all the researchers working in the emerging field of brain connectivity analysis.

Characterization of tomato Cycling Dof Factors reveals conserved and new functions in the control of flowering time and abiotic stress responses.

DNA binding with One Finger (DOF) transcription factors are involved in multiple aspects of plant growth and development but their precise roles in abiotic stress tolerance are largely unknown. Here we report a group of five tomato DOF genes, homologous to Arabidopsis Cycling DOF Factors (CDFs), that function as transcriptional regulators involved in responses to drought and salt stress and flowering-time control in a gene-specific manner. SlCDF1?5 are nuclear proteins that display specific binding with different affinities to canonical DNA target sequences and present diverse transcriptional activation capacities in vivo. SlCDF1?5 genes exhibited distinct diurnal expression patterns and were differentially induced in response to osmotic, salt, heat, and low-temperature stresses. Arabidopsis plants overexpressing SlCDF1 or SlCDF3 showed increased drought and salt tolerance. In addition, the expression of various stress-responsive genes, such as COR15, RD29A, and RD10, were differentially activated in the overexpressing lines. Interestingly, overexpression in Arabidopsis of SlCDF3 but not SlCDF1 promotes late flowering through modulation of the expression of flowering control genes such as CO and FT. Overall, our data connect SlCDFs to undescribed functions related to abiotic stress tolerance and flowering time through the regulation of specific target genes and an increase in particular metabolites

Association of breakfast consumption with objectively measured and self-reported physical activity, sedentary time and physical fitness in European adolescents: the HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Study

Objective: To examine the association of breakfast consumption with objectively measured and self-reported physical activity, sedentary time and physical fitness. Design: The HELENA (Healthy Lifestyle in Europe by Nutrition in Adolescence) Cross-Sectional Study. Breakfast consumption was assessed by two non-consecutive 24 h recalls and by a ‘Food Choices and Preferences’ questionnaire. Physical activity, sedentary time and physical fitness components (cardiorespiratory fitness, muscular fitness and speed/agility) were measured and self-reported. Socio-economic status was assessed by questionnaire. Setting: Ten European cities. Subjects: Adolescents (n 2148; aged 12?5–17?5 years). Results: Breakfast consumption was not associated with measured or self-reported physical activity. However, 24 h recall breakfast consumption was related to measured sedentary time in males and females; although results were not confirmed when using other methods to assess breakfast patterns or sedentary time. Breakfast consumption was not related to muscular fitness and speed/agility in males and females. However, male breakfast consumers had higher cardiorespiratory fitness compared with occasional breakfast consumers and breakfast skippers, while no differences were observed in females. Overall, results were consistent using different methods to assess breakfast consumption or cardiorespiratory fitness (all P#0?005). In addition, both male and female breakfast skippers (assessed by 24 h recall) were less likely to have high measured cardiorespiratory fitness compared with breakfast consumers (OR50?33; 95% CI 0?18, 0?59 and OR50?56; 95 %CI 0?32, 0?98,respectively). Results persisted across methods. Conclusions: Skipping breakfast does not seem to be related to physical activity,sedentary time or muscular fitness and speed/agility as physical fitness components in European adolescents; yet it is associated with both measured and self-reported cardiorespiratory fitness, which extends previous findings.

Análisis de micromovilidad en vástagos femorales mediante ensayo dinámico de oscilaciones libres

La artroplastia de cadera se considera uno de los mayores avances quirúrgicos de la Medicina. La aplicación de esta técnica de Traumatología se ha incrementado notablemente en los últimos anos, a causa principalmente del progresivo incremento de la esperanza de vida. En efecto, con la edad aumentan los problemas de artrosis y osteoporosis, enfermedades típicas de las articulaciones y de los huesos que requieren en muchos casos la sustitución protésica total o parcial de la articulación. El buen comportamiento funcional de una prótesis depende en gran medida de la estabilidad primaria, es decir, el correcto anclaje de la prótesis en el momento de su implantación. Las prótesis no cementadas basan su éxito a largo plazo en la osteointegración que tiene lugar entre el material protésico y el tejido óseo, y para lograrla es imprescindible conseguir unas buenas condiciones de estabilidad primaria. El aflojamiento aséptico es la principal causa de fallo de artroplastia total de cadera. Este es un fenómeno en el que, debido a complejas interacciones de factores mecánicos y biológicos, se producen movimientos relativos que comprometen la funcionalidad del implante. La minimización de los correspondientes danos depende en gran medida de la detección precoz del aflojamiento. Para lograr la detección temprana del aflojamiento aséptico del vástago femoral se han ensayado diferentes técnicas, tanto in vivo como in vitro: análisis numéricos y técnicas experimentales basadas en sensores de movimientos provocados por cargas transmitidas natural o artificialmente, tales como impactos o vibraciones de distintas frecuencias. Los montajes y procedimientos aplicados son heterogéneos y, en muchas ocasiones, complejos y costosos, no existiendo acuerdo sobre una técnica simple y eficaz de aplicación general. Asimismo, en la normativa vigente que regula las condiciones que debe cumplir una prótesis previamente a su comercialización, no hay ningún apartado referido específicamente a la evaluación de la bondad del diseño del vástago femoral con respecto a la estabilidad primaria. El objetivo de esta tesis es desarrollar una metodología para el análisis, in vitro, de la estabilidad de un vástago femoral implantado, a fin de poder evaluar las técnicas de implantación y los diferentes diseños de prótesis previamente a su oferta en el mercado. Además se plantea como requisito fundamental que el método desarrollado sea sencillo, reversible, repetible, no destructivo, con control riguroso de parámetros (condiciones de contorno de cargas y desplazamientos) y con un sistema de registro e interpretación de resultados rápido, fiable y asequible. Como paso previo, se ha realizado un análisis cualitativo del problema de contacto en la interfaz hueso-vástago aplicando una técnica optomecánica del campo continuo (fotoelasticidad). Para ello se han fabricado tres modelos en 2D del conjunto hueso-vástago, simulando tres tipos de contactos en la interfaz: contacto sin adherencia y con holgura, contacto sin adherencia y sin holgura, y contacto con adherencia y homogéneo. Aplicando la misma carga a cada modelo, y empleando la técnica de congelación de tensiones, se han visualizado los correspondientes estados tensionales, siendo estos más severos en el modelo de unión sin adherencia, como cabía esperar. En todo caso, los resultados son ilustrativos de la complejidad del problema de contacto y confirman la conveniencia y necesidad de la vía experimental para el estudio del problema. Seguidamente se ha planteado un ensayo dinámico de oscilaciones libres con instrumentación de sensores resistivos tipo galga extensométrica. Las muestras de ensayo han sido huesos fémur en todas sus posibles variantes: modelos simplificados, hueso sintético normalizado y hueso de cadáver, seco y fresco. Se ha diseñado un sistema de empotramiento del extremo distal de la muestra (fémur) con control riguroso de las condiciones de anclaje. La oscilación libre de la muestra se ha obtenido mediante la liberación instantánea de una carga estética determinada y aplicada previamente, bien con una maquina de ensayo o bien por gravedad. Cada muestra se ha instrumentado con galgas extensométricas convencionales cuya señal se ha registrado con un equipo dinámico comercial. Se ha aplicado un procedimiento de tratamiento de señal para acotar, filtrar y presentar las respuestas de los sensores en el dominio del tiempo y de la frecuencia. La interpretación de resultados es de tipo comparativo: se aplica el ensayo a una muestra de fémur Intacto que se toma de referencia, y a continuación se repite el ensayo sobre la misma muestra con una prótesis implantada; la comparación de resultados permite establecer conclusiones inmediatas sobre los efectos de la implantación de la prótesis. La implantación ha sido realizada por un cirujano traumatólogo utilizando las mismas técnicas e instrumental empleadas en el quirófano durante la práctica clínica real, y se ha trabajado con tres vástagos femorales comerciales. Con los resultados en el dominio del tiempo y de la frecuencia de las distintas aplicaciones se han establecido conclusiones sobre los siguientes aspectos: Viabilidad de los distintos tipos de muestras sintéticas: modelos simplificados y fémur sintético normalizado. Repetibilidad, linealidad y reversibilidad del ensayo. Congruencia de resultados con los valores teóricos deducidos de la teoría de oscilaciones libres de barras. Efectos de la implantación de tallos femorales en la amplitud de las oscilaciones, amortiguamiento y frecuencias de oscilación. Detección de armónicos asociados a la micromovilidad. La metodología se ha demostrado apta para ser incorporada a la normativa de prótesis, es de aplicación universal y abre vías para el análisis de la detección y caracterización de la micromovilidad de una prótesis frente a las cargas de servicio. ABSTRACT Total hip arthroplasty is considered as one of the greatest surgical advances in medicine. The application of this technique on Traumatology has increased significantly in recent years, mainly due to the progressive increase in life expectancy. In fact, advanced age increases osteoarthritis and osteoporosis problems, which are typical diseases of joints and bones, and in many cases require full or partial prosthetic replacement on the joint. Right functional behavior of prosthesis is highly dependent on the primary stability; this means it depends on the correct anchoring of the prosthesis at the time of implantation. Uncemented prosthesis base their long-term success on the quality of osseointegration that takes place between the prosthetic material and bone tissue, and to achieve this good primary stability conditions is mandatory. Aseptic loosening is the main cause of failure in total hip arthroplasty. This is a phenomenon in which relative movements occur, due to complex interactions of mechanical and biological factors, and these micromovements put the implant functionality at risk. To minimize possible damage, it greatly depends on the early detection of loosening. For this purpose, various techniques have been tested both in vivo and in vitro: numerical analysis and experimental techniques based on sensors for movements caused by naturally or artificially transmitted loads, such as impacts or vibrations at different frequencies. The assemblies and methods applied are heterogeneous and, in many cases, they are complex and expensive, with no agreement on the use of a simple and effective technique for general purposes. Likewise, in current regulations for governing the conditions to be fulfilled by the prosthesis before going to market, there is no specific section related to the evaluation of the femoral stem design in relation to primary stability. The aim of this thesis is to develop a in vitro methodology for analyzing the stability of an implanted femoral stem, in order to assess the implantation techniques and the different prosthesis designs prior to its offer in the market. We also propose as a fundamental requirement that the developed testing method should be simple, reversible, repeatable, non-destructive, with close monitoring of parameters (boundary conditions of loads and displacements) and with the availability of a register system to record and interpret results in a fast, reliable and affordable manner. As a preliminary step, we have performed a qualitative analysis of the contact problems in the bone-stem interface, through the application of a continuous field optomechanical technique (photoelasticity). For this proposal three 2D models of bone–stem set, has been built simulating three interface contact types: loosened an unbounded contact, unbounded and fixed contact, and bounded homogeneous contact. By means of applying the same load to each model, and using the stress freezing technique, it has displayed the corresponding stress states, being more severe as expected, in the unbounded union model. In any case, the results clearly show the complexity of the interface contact problem, and they confirm the need for experimental studies about this problem. Afterward a free oscillation dynamic test has been done using resistive strain gauge sensors. Test samples have been femur bones in all possible variants: simplified models, standardized synthetic bone, and dry and cool cadaveric bones. An embedding system at the distal end of the sample with strong control of the anchoring conditions has been designed. The free oscillation of the sample has been obtained by the instantaneous release of a static load, which was previously determined and applied to the sample through a testing machine or using the gravity force. Each sample was equipped with conventional strain gauges whose signal is registered with a marketed dynamic equipment. Then, it has applied a signal processing procedure to delimit, filter and present the time and frequency response signals from the sensors. Results are interpreted by comparing different trials: the test is applied to an intact femur sample which is taken as a reference, and then this test is repeated over the same sample with an implanted prosthesis. From comparison between results, immediate conclusions about the effects of the implantation of the prosthesis can be obtained. It must be said that the implementation has been made by an expert orthopedic surgeon using the same techniques and instruments as those used in clinical surgery. He has worked with three commercial femoral stems. From the results obtained in the time and frequency domains for the different applications the following conclusions have been established: Feasibility of the different types of synthetic samples: simplified models and standardized synthetic femur. Repeatability, linearity and reversibility of the testing method. Consistency of results with theoretical values deduced from the bars free oscillations theory. Effects of introduction of femoral stems in the amplitude, damping and frequencies of oscillations Detection of micromobility associated harmonics. This methodology has been proved suitable to be included in the standardization process of arthroplasty prosthesis, it is universally applicable and it allows establishing new methods for the analysis, detection and characterization of prosthesis micromobility due to functional loads.

Scalable UWB photonic generator based on the combination of doublet pulses

We propose and experimentally demonstrate a scalable and reconfigurable optical scheme to generate high order UWB pulses. Firstly, various ultra wideband doublets are created through a process of phase-tointensity conversion by means of a phase modulation and a dispersive media. In a second stage, doublets are combined in an optical processing unit that allows the reconfiguration of UWB high order pulses. Experimental results both in time and frequency domains are presented showing good performance related to the fractional bandwidth and spectral efficiency parameters.

Simulation of scheduling gains in LTE

This paper describes the implementation of an LTE downlink simulator that is able to precisely model the fast time and frequency variations existing in a multipath channel. This is decisive to properly simulate the gains achievable by the channeldependent scheduling LTE is capable of. The aim of this study is to investigate the relationship between the throughput achieved by a base station and parameters of active users in the cell (such as SINR or speed). The ultimate goal is to obtain a model that can predict throughput as a function of a few selected parameters that characterize users’ conditions. A proportional fair scheduler is used because of its ability to maximize the BS throughput while preventing user starvation. Some conclusions are drawn on the main parameters affecting the BS throughput based on results obtained so far.

Descripción de parámetros glóticos basados en el modelado de los pliegues vocales para la detección de patología de la voz

Las patologías de la voz se han transformado en los últimos tiempos en una problemática social con cierto calado. La contaminación de las ciudades, hábitos como el de fumar, el uso de aparatos de aire acondicionado, etcétera, contribuyen a ello. Esto alcanza más relevancia en profesionales que utilizan su voz de manera frecuente, como, por ejemplo, locutores, cantantes, profesores o teleoperadores. Por todo ello resultan de especial interés las técnicas de ayuda al diagnóstico que son capaces de extraer conclusiones clínicas a partir de una muestra de la voz grabada con un micrófono, frente a otras invasivas que implican la exploración utilizando laringoscopios, fibroscopios o videoendoscopios, técnicas en cualquier caso mucho más molestas para los pacientes al exigir la introducción parcial del instrumental citado por la garganta, en actuaciones consideradas de tipo quirúrgico. Dentro de aquellas técnicas se ha avanzado mucho en un período de tiempo relativamente corto. En lo que se refiere al diagnóstico de patologías, hemos pasado en los últimos quince años de trabajar principalmente con parámetros extraídos de la señal de voz –tanto en el dominio del tiempo como en el de la frecuencia– y con escalas elaboradas con valoraciones subjetivas realizadas por expertos a hacerlo también con parámetros procedentes de estimaciones de la fuente glótica. La importancia de utilizar la fuente glótica reside, a grandes rasgos, en que se trata de una señal vinculada directamente al estado de la estructura laríngea del locutor y también en que está generalmente menos influida por el tracto vocal que la señal de voz. Es conocido que el tracto vocal guarda más relación con el mensaje hablado, y su presencia dificulta el proceso de detección de patología vocal. Estas estimaciones de la fuente glótica han sido obtenidas a través de técnicas de filtrado inverso desarrolladas por nuestro grupo de investigación. Hemos conseguido, además, profundizar en la naturaleza de la señal glótica: somos capaces de descomponerla y relacionarla con parámetros biomecánicos de los propios pliegues vocales, obteniendo estimaciones de elementos como la masa, la pérdida de energía o la elasticidad del cuerpo y de la cubierta del pliegue, entre otros. De las componentes de la fuente glótica surgen también los denominados parámetros biométricos, relacionados con la forma de la señal, que constituyen por sí mismos una firma biométrica del individuo. También trabajaremos con parámetros temporales, relacionados con las diferentes etapas que se observan dentro de la señal glótica durante un ciclo de fonación. Por último, consideraremos parámetros clásicos de perturbación y energía de la señal. En definitiva, contamos ahora con una considerable cantidad de parámetros glóticos que conforman una base estadística multidimensional, destinada a ser capaz de discriminar personas con voces patológicas o disfónicas de aquellas que no presentan patología en la voz o con voces sanas o normofónicas. Esta tesis doctoral se ocupa de varias cuestiones: en primer lugar, es necesario analizar cuidadosamente estos nuevos parámetros, por lo que ofreceremos una completa descripción estadística de los mismos. También estudiaremos cuestiones como la distribución de los parámetros atendiendo a criterios como el de normalidad estadística de los mismos, ocupándonos especialmente de la diferencia entre las distribuciones que presentan sujetos sanos y sujetos con patología vocal. Para todo ello emplearemos diferentes técnicas estadísticas: generación de elementos y diagramas descriptivos, pruebas de normalidad y diversos contrastes de hipótesis, tanto paramétricos como no paramétricos, que considerarán la diferencia entre los grupos de personas sanas y los grupos de personas con alguna patología relacionada con la voz. Además, nos interesa encontrar relaciones estadísticas entre los parámetros, de cara a eliminar posibles redundancias presentes en el modelo, a reducir la dimensionalidad del problema y a establecer un criterio de importancia relativa en los parámetros en cuanto a su capacidad discriminante para el criterio patológico/sano. Para ello se aplicarán técnicas estadísticas como la Correlación Lineal Bivariada y el Análisis Factorial basado en Componentes Principales. Por último, utilizaremos la conocida técnica de clasificación Análisis Discriminante, aplicada a diferentes combinaciones de parámetros y de factores, para determinar cuáles de ellas son las que ofrecen tasas de acierto más prometedoras. Para llevar a cabo la experimentación se ha utilizado una base de datos equilibrada y robusta formada por doscientos sujetos, cien de ellos pertenecientes al género femenino y los restantes cien al género masculino, con una proporción también equilibrada entre los sujetos que presentan patología vocal y aquellos que no la presentan. Una de las aplicaciones informáticas diseñada para llevar a cabo la recogida de muestras también es presentada en esta tesis. Los distintos estudios estadísticos realizados nos permitirán identificar aquellos parámetros que tienen una mayor contribución a la hora de detectar la presencia de patología vocal. Alguno de los estudios, además, nos permitirá presentar una ordenación de los parámetros en base a su importancia para realizar la detección. Por otra parte, también concluiremos que en ocasiones es conveniente realizar una reducción de la dimensionalidad de los parámetros para mejorar las tasas de detección. Por fin, las propias tasas de detección constituyen quizá la conclusión más importante del trabajo. Todos los análisis presentes en el trabajo serán realizados para cada uno de los dos géneros, de acuerdo con diversos estudios previos que demuestran que los géneros masculino y femenino deben tratarse de forma independiente debido a las diferencias orgánicas observadas entre ambos. Sin embargo, en lo referente a la detección de patología vocal contemplaremos también la posibilidad de trabajar con la base de datos unificada, comprobando que las tasas de acierto son también elevadas. Abstract Voice pathologies have become recently in a social problem that has reached a certain concern. Pollution in cities, smoking habits, air conditioning, etc. contributes to it. This problem is more relevant for professionals who use their voice frequently: speakers, singers, teachers, actors, telemarketers, etc. Therefore techniques that are capable of drawing conclusions from a sample of the recorded voice are of particular interest for the diagnosis as opposed to other invasive ones, involving exploration by laryngoscopes, fiber scopes or video endoscopes, which are techniques much less comfortable for patients. Voice quality analysis has come a long way in a relatively short period of time. In regard to the diagnosis of diseases, we have gone in the last fifteen years from working primarily with parameters extracted from the voice signal (both in time and frequency domains) and with scales drawn from subjective assessments by experts to produce more accurate evaluations with estimates derived from the glottal source. The importance of using the glottal source resides broadly in that this signal is linked to the state of the speaker's laryngeal structure. Unlike the voice signal (phonated speech) the glottal source, if conveniently reconstructed using adaptive lattices, may be less influenced by the vocal tract. As it is well known the vocal tract is related to the articulation of the spoken message and its influence complicates the process of voice pathology detection, unlike when using the reconstructed glottal source, where vocal tract influence has been almost completely removed. The estimates of the glottal source have been obtained through inverse filtering techniques developed by our research group. We have also deepened into the nature of the glottal signal, dissecting it and relating it to the biomechanical parameters of the vocal folds, obtaining several estimates of items such as mass, loss or elasticity of cover and body of the vocal fold, among others. From the components of the glottal source also arise the so-called biometric parameters, related to the shape of the signal, which are themselves a biometric signature of the individual. We will also work with temporal parameters related to the different stages that are observed in the glottal signal during a cycle of phonation. Finally, we will take into consideration classical perturbation and energy parameters. In short, we have now a considerable amount of glottal parameters in a multidimensional statistical basis, designed to be able to discriminate people with pathologic or dysphonic voices from those who do not show pathology. This thesis addresses several issues: first, a careful analysis of these new parameters is required, so we will offer a complete statistical description of them. We will also discuss issues such as distribution of the parameters, considering criteria such as their statistical normality. We will take special care in the analysis of the difference between distributions from healthy subjects and the distributions from pathological subjects. To reach these goals we will use different statistical techniques such as: generation of descriptive items and diagramas, tests for normality and hypothesis testing, both parametric and nonparametric. These latter techniques consider the difference between the groups of healthy subjects and groups of people with an illness related to voice. In addition, we are interested in finding statistical relationships between parameters. There are various reasons behind that: eliminate possible redundancies in the model, reduce the dimensionality of the problem and establish a criterion of relative importance in the parameters. The latter reason will be done in terms of discriminatory power for the criterion pathological/healthy. To this end, statistical techniques such as Bivariate Linear Correlation and Factor Analysis based on Principal Components will be applied. Finally, we will use the well-known technique of Discriminant Analysis classification applied to different combinations of parameters and factors to determine which of these combinations offers more promising success rates. To perform the experiments we have used a balanced and robust database, consisting of two hundred speakers, one hundred of them males and one hundred females. We have also used a well-balanced proportion where subjects with vocal pathology as well as subjects who don´t have a vocal pathology are equally represented. A computer application designed to carry out the collection of samples is also presented in this thesis. The different statistical analyses performed will allow us to determine which parameters contribute in a more decisive way in the detection of vocal pathology. Therefore, some of the analyses will even allow us to present a ranking of the parameters based on their importance for the detection of vocal pathology. On the other hand, we will also conclude that it is sometimes desirable to perform a dimensionality reduction in order to improve the detection rates. Finally, detection rates themselves are perhaps the most important conclusion of the work. All the analyses presented in this work have been performed for each of the two genders in agreement with previous studies showing that male and female genders should be treated independently, due to the observed functional differences between them. However, with regard to the detection of vocal pathology we will consider the possibility of working with the unified database, ensuring that the success rates obtained are also high.

Scalable high-order UWB pulse generation employing an FBG-based photonic superstructure

In this letter, we propose and experimentally demonstrate a compact, flexible, and scalable ultrawideband (UWB) generator based on the merge of phase-to-intensity conversion and pulse shaping employing an fiber Bragg Grating-based superstructure. Our approach offers the capacity for generating high-order UWB pulses by means of the combination of various low-order derivatives. Moreover, the scheme permits the implementation of binary and multilevel modulation formats. Experimental measurements of the generated UWB pulses, in both time and frequency domain, are presented revealing efficiency and a proper fit in terms of Federal Communications Commission settled standards.

Loss model for a high frequency and low load DC/DC synchronous buck converter

This work presents a behavioral-analytical hybrid loss model for a buck converter. The model has been designed for a wide operating frequency range up to 4MHz and a low power range (below 20W). It is focused on the switching losses obtained in the power MOSFETs. Main advantages of the model are the fast calculation time and a good accuracy. It has been validated by simulation and experimentally with one Ga, power transistor and two Si MOSFETs. Results show good agreement between measurements and the model.