Promoting mixed stands through conversion treatments. Effect of holm oak coppices thinning on black pine regeneration

The effects of conversion treatments, depending on ecological factors and silvicultural parameters (thinning intensity, thinning type and rotation, among others) have been studied during the last fifteen years in an experimental trial in Central Spain. The general climate is continental Mediterranean; soils are low depth and limy; vegetation is an homogeneous dense coppices of Quercus ilex with isolated Pinus nigra trees. The experimental design (three locations) includes different thinning intensities (from 0 to 100% of extracted basal area). Inventories have been carried out in 1994 and 2010; thinning treatments were done in 1995 and 2011. Analysis of the effects of the conversion treatment show the increment of diameter and height growth rates, the canopy recovery and the stand resprouting, finding differences in these effects between thinning treatments. Besides the induced changes at holm oak stand, the application of conversion treatment clearly changed the woodland dynamics. Fifteen years after the thinnings, floristic composition varied and an abundant pine regeneration was installed in the woodland. In this work we describe the changes between inventories in tree species composition and diameter distribution, specially in the case of black pine. The conversion treatment caused changes in forest dynamics in the short term, increasing biodiversity and diversifying the forest structure. The fast installation of Pinus regeneration suggests the potential of the zone for the establishment of multipurpose mixed Quercus-Pinus stands in wide areas where Quercus species were favoured by human populations for firewood production. Conversion treatment of coppices, with the creation of mixed stands, constitutes a good management alternative for extensive areas and an interesting technique to adaptation to global change.

Cu(In,Ga)Se2 absorber thinning and the homo-interface model: Influence of Mo back contact and 3-stage process on device characteristics

Thinning the absorber layer is one of the possibilities envisaged to further decrease the production costs of Cu(In,Ga)Se2 (CIGSe) thin films solar cell technology. In the present study, the electronic transport in submicron CIGSe-based devices has been investigated and compared to that of standard devices. It is observed that when the absorber is around 0.5 μm-thick, tunnelling enhanced interface recombination dominates, which harms cells energy conversion efficiency. It is also shown that by varying either the properties of the Mo back contact or the characteristics of 3-stage growth processing, one can shift the dominating recombination mechanism from interface to space charge region and thereby improve the cells efficiency. Discussions on these experimental facts led to the conclusions that 3-stage process implies the formation of a CIGSe/CIGSe homo-interface, whose location as well as properties rule the device operation; its influence is enhanced in submicron CIGSe based solar cells.

Accident Management Actions In An Upper-Head Small-Break Loss-Of-Coolant Accident With High-Pressure Safety Injection Failed

Since the Three Mile Island accident, an important focus of pressurized water reactor (PWR) transient analyses has been a small-break loss-of-coolant accident (SBLOCA). In 2002, the discovery of thinning of the vessel head wall at the Davis Besse nuclear power plant reactor indicated the possibility of an SBLOCA in the upper head of the reactor vessel as a result of circumferential cracking of a control rod drive mechanism penetration nozzle - which has cast even greater importance on the study of SBLOCAs. Several experimental tests have been performed at the Large Scale Test Facility to simulate the behavior of a PWR during an upper-head SBLOCA. The last of these tests, Organisation for Economic Co-operation and Development Nuclear Energy Agency Rig of Safety Assessment (OECD/NEA ROSA) Test 6.1, was performed in 2005. This test was simulated with the TRACE 5.0 code, and good agreement with the experimental results was obtained. Additionally, a broad analysis of an upper-head SBLOCA with high-pressure safety injection failed in a Westinghouse PWR was performed taking into account different accident management actions and conditions in order to check their suitability. This issue has been analyzed also in the framework of the OECD/NEA ROSA project and the Code Applications and Maintenance Program (CAMP). The main conclusion is that the current emergency operating procedures for Westinghouse reactor design are adequate for these kinds of sequences, and they do not need to be modified.

Utilización del cultivo plurianual de pataca (Helianthus tuberosus L.) para la producción de hidratos de carbono fermentables a partir de los tallos

La pataca (Helianthus tuberosus L.) es una especie de cultivo con un alto potencial en la producción de hidratos de carbono de reserva en forma de polifructanos, especialmente inulina, que se acumulan temporalmente en los tallos en forma de polisacáridos para translocarse posteriormente a los tubérculos, donde son almacenados. Aunque tradicionalmente el producto de interés del cultivo son los tubérculos, que acumulan gran cantidad de hidratos de carbono fermentables (HCF) cuando se recogen al final del ciclo de desarrollo, en este trabajo se pretende evaluar el potencial de la pataca como productor de HCF a partir de los tallos cosechados en el momento de máximo contenido en HCF, mediante un sistema de cultivo plurianual. Se han realizado los siguientes estudios: i) Determinación del momento óptimo de cosecha en ensayos con 12 clones ii) Potencial del cultivo plurianual de la pataca en términos de producción anual de biomasa aérea y de HCF en cosechas sucesivas, iii) Ensayos de conservación de la biomasa aérea, iv) Estimación de los costes de las dos modalidades de cultivo de pataca para producción de HCF y v) Estimación de la sostenibilidad energética de la producción de bioetanol mediante la utilización de los subproductos. Para la determinación del momento óptimo de la cosecha de la biomasa aérea se ensayaron 12 clones de diferente precocidad en Madrid; 4 tempranos (Huertos de Moya, C-17, Columbia y D-19) y 8 tardíos (Boniches, China, K-8, Salmantina, Nahodka, C-13, INIA y Violeta de Rennes). El máximo contenido en HCF tuvo lugar en el estado fenológico de botón floral-flor que además coincidió con la máxima producción de biomasa aérea. De acuerdo con los resultados obtenidos, la cosecha de los clones tempranos se debería realizar en el mes de julio y en los clones tardíos en septiembre, siendo éstos últimos más productivos. La producción media más representativa entre los 12 clones, obtenida en el estado fenológico de botón floral fue de 23,40 t ms/ha (clon INIA), con un contenido medio en HCF de 30,30 % lo que supondría una producción potencial media de 7,06 t HCF/ha. La producción máxima en HCF se obtuvo en el clon Boniches con 7,61 t/ha y 22,81 t ms/ha de biomasa aérea. En el sistema de cultivo plurianual la cantidad de tallos por unidad de superficie aumenta cada año debido a la cantidad de tubérculos que van quedando en el terreno, sobre todo a partir del 3er año, lo que produce la disminución del peso unitario de los tallos, con el consiguiente riesgo de encamado. El aclareo de los tallos nacidos a principios de primavera mediante herbicidas tipo Glifosato o mediante una labor de rotocultor rebaja la densidad final de tallos y mejora los rendimientos del cultivo. En las experiencias de conservación de la biomasa aérea se obtuvo una buena conservación por un período de 6 meses de los HCF contenidos en los tallos secos empacados y almacenados bajo cubierta. Considerando que el rendimiento práctico de la fermentación alcohólica es de 0,5 l de etanol por cada kg de azúcar, la producción potencial de etanol para una cosecha de tallos de 7,06 t de HCF/ha sería de 3.530 l/ha. El bagazo producido en la extracción de los HCF de la biomasa aérea supondría 11,91 t/ha lo que utilizado para fines térmicos supone más de 3 veces la energía primaria requerida en el proceso de producción de etanol, considerando un poder calorífico inferior de 3.832,6 kcal/kg. Para una producción de HCF a partir de la biomasa aérea de 7,06 t/ha y en tubérculos al final del ciclo de 12,11 t/ha, los costes de producción estimados para cada uno de ellos fueron de 184,69 €/t para los HCF procedentes de la biomasa aérea y 311,30 €/t para los de tubérculos. Como resultado de este trabajo se puede concluir que la producción de HCF a partir de la biomasa aérea de pataca en cultivo plurianual, es viable desde un punto de vista técnico, con reducción de los costes de producción respecto al sistema tradicional de cosecha de tubérculos. Entre las ventajas técnicas de esta modalidad de cultivo, cabe destacar: la reducción de operaciones de cultivo, la facilidad y menor coste de la cosecha, y la posibilidad de conservación de los HCF en la biomasa cosechada sin mermas durante varios meses. Estas ventajas, compensan con creces el menor rendimiento por unidad de superficie que se obtiene con este sistema de cultivo frente al de cosecha de los tubérculos. Jerusalem artichoke (Helianthus tuberosus L.) (JA) is a crop with a high potential for the production of carbohydrates in the form of polyfructans, especially inulin, which are temporarily accumulated in the stems in the form of polysaccharides. Subsequently they are translocated to the tubers, where they are finally accumulated. In this work the potential of Jerusalem artichoke for fermentable carbohydrates from stems that are harvested at their peak of carbohydrates accumulation is assessed as compared to the traditional cultivation system that aims at the production of tubers harvested at the end of the growth cycle. Tubers are storage organs of polyfructans, namely fermentable carbohydrates. Studies addressed in this work were: i) Determination of the optimum period of time for stem harvesting as a function of clone precocity in a 12-clone field experiment; ii) Study of the potential of JA poly-annual crop regarding the annual yield of aerial biomass and fermentable carbohydrates (HCF) over the years; iii) Tests of storage of the aerial biomass, iv) Comparative analysis of the two JA cultivation systems for HCF production: the poly-annual system for aerial biomass harvesting versus the annual cultivation system for tubers and v) Estimation of the energy sustainability of the bioethanol production by using by-products of the production chain. In order to determine the best period of time for aerial biomass harvesting twelve JA clones of different precocity were tested in Madrid: four early clones (Huertos de Moya, C-17, Columbia and D-19) and eight late clones (Boniches, China, K-8 , Salmantina, Nahodka, C-13, INIA and Violeta de Rennes). Best time was between the phenological stages of floral buds (closed capitula) and blossom (opened capitula), period in which the peak of biomass production coincides with the peak of HCF accumulation in the stems. According to the results, the early clones should be harvested in July and the late ones in September, being the late clones more productive. The clone named INIA was the one that exhibited more steady yields in biomass over the 12 clones experimented. The average potential biomass production of this clone was 23.40 t dm/ha when harvested at the floral buds phenological stage; mean HCF content is 30.30%, representing 7.06 t HCF/ha yield. However, the highest HCF production was obtained for the clone Boniches, 7.61 t HCF/ha from a production of 22.81 t aerial biomass/ha. In the poly-annual cultivation system the number of stems per unit area increases over the years due to the increase in the number of tubers that are left under ground; this effect is particularly important after the 3rd year of the poly-annual crop and results in a decrease of the stems unit weight and a risk of lodging. Thinning of JA shoots in early spring, by means of an herbicide treatment based on glyphosate or by means of one pass with a rotary tiller, results in a decrease of the crop stem density and in higher crop yields. Tests of biomass storing showed that the method of keeping dried stems packed and stored under cover results in a good preservation of HCF for a period of six months at least. Assuming that the fermentation yield is 0.5 L ethanol per kg sugars and a HCF stem production of 7.06 t HCF/ha, the potential for bioethanol is estimated at 3530 L/ha. The use of bagasse -by-product of the process of HCF extraction from the JA stems- for thermal purposes would represent over 3 times the primary energy required for the industrial ethanol production process, assuming 11.91 t/ha bagasse and 3832.6 kcal/kg heating value. HCF production costs of 7.06 t HCF/ha yield from aerial biomass and HCF production costs of 12.11 t HCF/ha from tubers were estimated at 184.69 €/t HCF and 311.30 €/t HCF, respectively. It can be concluded that the production of HCF from JA stems, following a poly-annual cultivation system, can be feasible from a technical standpoint and lead to lower production costs as compared to the traditional annual cultivation system for the production of HCF from tubers. Among the technical advantages of the poly-annual cultivation system it is worth mentioning the reduction in crop operations, the ease and efficiency of harvesting operations and the possibility of HCF preservation without incurring in HCF losses during the storage period, which can last several months. These advantages might compensate the lower yield of HCF per unit area that is obtained in the poly-annual crop system, which aims at stems harvesting, versus the annual one, which involves tubers harvesting.

An integral model for natural regeneration of Pinus pinea L. in the Northern Plateau (Spain) = Modelo integral de regeneración natural para Pinus pinea L. en la Meseta Norte (España)

Natural regeneration is an ecological key-process that makes plant persistence possible and, consequently, it constitutes an essential element of sustainable forest management. In this respect, natural regeneration in even-aged stands of Pinus pinea L. located in the Spanish Northern Plateau has not always been successfully achieved despite over a century of pine nut-based management. As a result, natural regeneration has recently become a major concern for forest managers when we are living a moment of rationalization of investment in silviculture. The present dissertation is addressed to provide answers to forest managers on this topic through the development of an integral regeneration multistage model for P. pinea stands in the region. From this model, recommendations for natural regeneration-based silviculture can be derived under present and future climate scenarios. Also, the model structure makes it possible to detect the likely bottlenecks affecting the process. The integral model consists of five submodels corresponding to each of the subprocesses linking the stages involved in natural regeneration (seed production, seed dispersal, seed germination, seed predation and seedling survival). The outputs of the submodels represent the transitional probabilities between these stages as a function of climatic and stand variables, which in turn are representative of the ecological factors driving regeneration. At subprocess level, the findings of this dissertation should be interpreted as follows. The scheduling of the shelterwood system currently conducted over low density stands leads to situations of dispersal limitation since the initial stages of the regeneration period. Concerning predation, predator activity appears to be only limited by the occurrence of severe summer droughts and masting events, the summer resulting in a favourable period for seed survival. Out of this time interval, predators were found to almost totally deplete seed crops. Given that P. pinea dissemination occurs in summer (i.e. the safe period against predation), the likelihood of a seed to not be destroyed is conditional to germination occurrence prior to the intensification of predator activity. However, the optimal conditions for germination seldom take place, restraining emergence to few days during the fall. Thus, the window to reach the seedling stage is narrow. In addition, the seedling survival submodel predicts extremely high seedling mortality rates and therefore only some individuals from large cohorts will be able to persist. These facts, along with the strong climate-mediated masting habit exhibited by P. pinea, reveal that viii the overall probability of establishment is low. Given this background, current management –low final stand densities resulting from intense thinning and strict felling schedules– conditions the occurrence of enough favourable events to achieve natural regeneration during the current rotation time. Stochastic simulation and optimisation computed through the integral model confirm this circumstance, suggesting that more flexible and progressive regeneration fellings should be conducted. From an ecological standpoint, these results inform a reproductive strategy leading to uneven-aged stand structures, in full accordance with the medium shade-tolerant behaviour of the species. As a final remark, stochastic simulations performed under a climate-change scenario show that regeneration in the species will not be strongly hampered in the future. This resilient behaviour highlights the fundamental ecological role played by P. pinea in demanding areas where other tree species fail to persist.

Experimental and modeling analysis of internal luminescence in III-V solar cells

In high quality solar cells, the internal luminescence can be harnessed to enhance the overall performance. Internal confinement of the photons can lead to an increased open-circuit voltage and short-circuit current. Alternatively, in multijunction solar cells the photons can be coupled from a higher bandgap junction to a lower bandgap junction for enhanced performance. We model the solar cell as an optical cavity and compare calculated performance characteristics with measurements. We also describe how very high luminescent coupling alleviates the need for top-cell thinning to achieve current-matching.

Ice volume changes (1936-1990-2007) and ground-penetrating radar studies of Ariebreen, Hornsund, Spitsbergen

Ariebreen is a small (0.37 km2) valley glacier located in southern Spitsbergen. Our ground-penetrating radar surveys of the glacier show that it is less than 30 m thick on average, with a maximum thickness of 82 m, and it appears to be entirely cold. By analysing digital terrain models of the ice surface from different dates, we determine the area and volume changes during two periods, 1936-1990 and 1990-2007. The total ice volume of the glacier has decreased by 73% during the entire period 1936-2007, which is equivalent to a mean mass balance rate of -0.6190.17 m/yr w.eq. The glacier thinning rate has increased markedly between the first and second periods, from -0.5090.22 to -0.9590.17 m/yr w.eq.

Gestión de la fertilidad de suelos y la nutrición de plantaciones de teca (Tectona grandis L.f.) en América Central

La teca (Tectona grandis L.f.) ha sido tradicionalmente considerada como una madera preciosa en los países del SE Asiático, de donde es originaria, pero durante las últimas décadas ha alcanzado especial relevancia en el sector internacional de las maderas tropicales duras de buena calidad. La especie ha sido ampliamente establecida en América Central, donde tiene una gran importancia socioeconómica, tanto por el impacto de las grandes empresas multinacionales que gestionan grandes plantaciones en la región, como por el gran número de pequeños y medianos propietarios que han elegido esta especie para reforestar sus tierras. Pese a la gran importancia de esta especie, se ha desarrollado relativamente poca investigación acerca de su nutrición y de la gestión del suelo necesaria para su establecimiento y mantenimiento en condiciones sostenibles y productivas. En la presente Tesis Doctoral, tras realizar una amplia revisión bibliográfica, se caracterizan los suelos y la nutrición de las plantaciones de teca en América Central y se proponen varias herramientas para la mejora de su gestión. Las plantaciones de teca de América Central presentan habitualmente deficiencias de K y P, además de algunos problemas de acidez ocasionales. Estos se originan, principalmente, por la mala selección de sitio que se realizó en las últimas dos décadas del siglo XX y por el establecimiento de plantaciones de teca por pequeños propietarios en terrenos que no tienen características propicias para la especie. Además, estos problemas comunes relativos a la baja disponibilidad de P y de K en el suelo son causantes de las relativamente bajas concentraciones foliares de estos elementos (0,88±0,07% K y 0,16±0,04% P) encontradas en plantaciones de teca características de la región. Se presentan varios modelos estadísticos que permiten a los gestores: (a) usarlos como referencia para la interpretación de análisis foliares, ya que ofrecen valores que se consideran característicos de plantaciones de teca con un buen estado nutricional; (b) estimar la cantidad de nutrientes acumulados en la biomasa aérea de sus plantaciones y, sobre todo, su extracción a través de la madera en un aprovechamiento forestal, bien sea una clara o la corta final. La gran acumulación de N, P y K en plantaciones de teca ha de ser considerada como un factor fundamental en su gestión. Además, P y K adquieren mayor relevancia aún ya que su extracción del sistema a través de la madera y su escasa disponibilidad en los suelos hacen que se presente un importante desequilibrio que pone en riesgo la sostenibilidad del sistema. En ese sentido, cambiar la época de cosecha, de la actual (en Enero-Mayo) a Septiembre o Diciembre, puede reducir entre un 24 y un 28% la salida de N asociada a la extracción de madera, un 29% la de P y entre un 14 y un 43% la de K. Se estima que la concentración foliar de P es un factor limitante de la productividad de plantaciones de teca en América Central, proponiéndose un nivel crítico de 0,125%. Además, la teca presenta una tolerancia muy baja a suelos salinos, tendencia que no había sido señalada hasta el momento, siendo muy alta la probabilidad de que la plantación tenga un crecimiento lento o muy lento cuando la Saturación de Na es mayor de 1,1%. Por otro lado, se confirma que K es uno de los elementos clave en la nutrición de las plantaciones de teca en la región centroamericana, proponiéndose un nivel crítico provisional de 3,09% para la Saturación de K, por encima del cual es muy probable que la plantación tenga un crecimiento muy alto. Se ha comprobado que las técnicas estadísticas de análisis multivariante pueden ser usadas como herramientas para agrupar los rodales en base a sus similitudes en cuanto a la fertilidad del suelo y mejorar así el diseño de planes de fertilización en plantaciones con una superficie relativamente grande. De esta manera, se pueden ajustar planes de fertilización más eficientes a escala de grupos de rodales, como un primer paso hacia la selvicultura de precisión, intensificando y diversificando la gestión en función de las diferencias edáficas. Finalmente, aunque los análisis foliares y de suelos indiquen la existencia de deficiencias nutricionales, la fertilización de las plantaciones no siempre va a producir efectos positivos sobre su crecimiento si no se diseña adecuadamente teniendo en cuenta varios factores que pueden estar influyendo negativamente en dicha respuesta, como la densidad de las plantaciones (sinergias con la programación de los clareos y claras) y la elección de la dosis y del producto a aplicar (habitualmente dosis bajas de N-P-K en lugar de incluir otros nutrientes como Mg, B y Zn o usar otros productos como micorrizas, biofertilizantes etc…). ABSTRACT Teak (Tectona grandis L.f.) has been traditionally considered as a precious wood in SE Asia, where it is indigenous. However, during recent decades the species has reached worldwide relevance in the tropical high quality hardwood sector. Teak has been widely established in Central America, where it has become a key species in the forest sector due to its socioeconomic impact, either because of the big-scale plantations of transnational companies and the abundant small-scale plantations established by many farmers. Despite the relevance of the species, little research has been carried out regarding its soil fertility and nutrition management, a key issue both for sustainability and productivity. The present Thesis performs a literature review to this respect, characterize the soil fertility and the nutrition of teak plantations of Central America and propose several management tools. Soil deficiencies of K and P are usually found in teak plantations in Central America, in addition to occasional acidity problems. These problems are mainly derived of (a) a poor site selection performed during 80s and 90s; and (b) small-scale plantations by farmers in sites which are not adequate for the species. These common soil fertility problems related with P and K soil availability are probably the cause of the relatively low P and K foliar concentration (0,88±0,07% K y 0,16±0,04% P) found in representative teak plantations of the region. Several statistical models are proposed, which allow forest managers to: (a) use them as a reference for foliar analysis interpretation, as they show values considered as representative for teak plantations with an adequate nutritional status in the region; (b) estimate the amount of nutrients accumulated in the aerial biomass of the plantations and, especially, the amount of them which are extracted from the systems as wood is harvested in thinning or final clearcuts. The accumulation of N, P and K result in a key factor for teak management in the region. This turns out to be especially relevant for the P and K because their high output rate by timber extraction and the low soil availability result in an important unbalance which constitutes a risk regarding the sustainability of the system. To this respect, modifying the harvesting time from the usual right now (January-May, business as usual scenario) to September or December (proposed alternatives) can reduce between 24 and 28% the N output associated to timber extraction, 29% the P output and between 14 and 43% the K. Foliar P concentration is a main limiting factor for teak plantations productivity in Central America and a 0.125% critical level is proposed. In addition, the results show a very low tolerance for soil salinity, tendency which was not previously reported. Hence, the probability of teak plantations to have low or very low Site Index is high when Na Saturation is higher than 1.1%. On the other hand, K is confirmed as one of the key nutrients regarding teak nutrition in Central America and a 3.09% provisional critical level is proposed for K Saturation; when values are above this level the probability of having very high Site Index is high. Multivariate statistical analyses have been successfully tested to be used as tools to group forest stands according to their soil fertility similarities. Hence, more efficient fertilization plans can be designed for each group of stands, intensifying and diversifying nutritional management according to soil fertility differences. This methodology, which is considered as a first step towards precision forestry, is regarded as helpful tool to design fertilization plans in big scale plantations. Finally, even though foliar and soil analysis would point out some nutritional deficiencies in a forest stand, the results show how the fertilization is not always going to have a positive effect over forest growth if it is not adequately designed. Some factors have been identified as determinants of tree response to fertilization: density (synergisms between fertilization and thinning scheduling) and the appropriate selection of dosages and product (usually low dosages are applied and N-P-K is preferred instead of applying other nutrients such as Mg, B or Zn or using other alternatives such as mycorrhizas or biofertilizers).

Component integration strategies in metamorphic 4-junction III-V concentrator solar cells

Progressing beyond 3-junction inverted-metamorphic multijunction solar cells grown on GaAs substrates, to 4-junction devices, requires the development of high quality metamorphic 0.7 eV GaInAs solar cells. Once accomplished, the integration of this subcell into a full, Monolithic, series connected, 4J-IMM structure demands the development of a metamorphic tunnel junction lattice matched to the 1eV GaInAs subcell. Moreover, the 0.7 eV junction adds about 2 hours of growth time to the structure, implying a heavier annealing of the subcells and tunnel junctions grown first. The final 4J structure is above 20 Pm thick, with about half of this thickness used by the metamorphic buffers required to change the lattice constant throughout the structure. Thinning of these buffers would help reduce the total thickness of the 4J structure to decrease its growth cost and the annealing time. These three topics: development of a metamorphic tunnel junction for the 4th junction, analysis of the annealing, and thinning of the structure, are tackled in this work. The results presented show the successful implementation of an antimonide-based tunnel junction for the 4th junction and of pathways to mitigate the impact of annealing and reduce the thickness of the metamorphic buffers.

Unearthing the roots of degradation of Quercus pyrenaica coppices: an integrative perspective from clonal structure to carbon budgets

Quercus pyrenaica es una especie rebrotadora de raíz intensa e históricamente aprovechada en monte bajo para la obtención de leñas, carbón y pastos. Debido al éxodo rural y a la aparición de nuevas fuentes energéticas, este aprovechamiento fue abandonado en la década de 1970. Desde entonces, las bajas producciones de madera y bellota y el puntisecado de los pies evidencian el generalizado estancamiento de estas masas. Uno de los mayores retos actuales de la selvicultura en el ámbito mediterráneo es encontrar usos alternativos para estos montes abandonados, siendo la conversión a monte alto una de las alternativas preferidas. Se han realizado resalveos de conversión, sin embrago, éstos se aplican sin un conocimiento integral de las causas de la degradación. En esta tesis doctoral, estudiamos un hipotético desequilibrio entre la parte radical y la parte aérea (R:S) de las cepas de rebollo como causa subyacente de su decaimiento. En una parcela experimental, aprovechada al menos desde el siglo XII, se realizaron análisis genéticos a priori para elucidar la estructura genética del rodal, y así estudiar la influencia del tamaño clonal en el funcionamiento de las cepas. Las cepas de mayor tamaño presentaron un menor crecimiento diametral de sus pies, así como mayores tasas de respiración radical, estimadas a partir de flujos internos de CO2 a través del xilema (FT) y de los flujos de CO2 del suelo. Estos resultados sugieren que el desequilibrio R:S aumenta con el tamaño clonal, dado que la eliminación periódica de órganos aéreos, al mismo tiempo que las raíces permanecen intactas, da lugar a un gran desarrollo del sistema radical que consume gran parte de los carbohidratos no estructurales (NSC) en respiración de mantenimiento, comprometiendo así el desarrollo de órganos aéreos. Se excavaron y pesaron dos cepas compuestas por cuatro y ocho pies, las cuales mostraron ratios R:S (0.5 y 1, respectivamente) superiores a los registrados en pies de origen sexual. Al igual que en otras especies rebrotadoras de raíz, se observaron altas concentraciones de NSC en las raíces (> 20% en primavera) y una gran proporción de albura en el sistema radical (52%) que alberga una notable reserva de NSC (87 kg en la cepa de mayor tamaño). En el sistema radical de dicha cepa, estimada mediante dataciones radiocarbónicas en 550 años de edad, se contaron 248 uniones radicales. La persistencia de sistemas radicales grandes, viejos, y altamente interconectados sugiere que la gran cantidad de recursos almacenados y consumidos en las raíces compensan un pobre desarrollo aéreo con una alta resiliencia vegetativa. Para un mejor entendimiento de los balances de carbono y del agotamiento de NSC en las cepas de rebollo, se midieron los flujos internos y externos de CO2 en troncos y los flujos de CO2 del suelo, y se estimó la respiración de órganos aéreos (RS) y subterráneos (RR). Estacionalmente, RS y RR reflejaron las dinámicas de flujo de savia y de crecimiento del tronco, y estuvieron determinadas principalmente por los flujos externos de CO2, dada la escasa contribución de FT a RS y RR (< 10% y < 2%, respectivamente). En una escala circadiana, la contribución de FT a RS aumentó hasta un 25% en momentos de alta transpiración. Las bajas concentraciones de CO2 en el xilema ([CO2] hasta un 0.11%) determinaron comparativamente unos bajos FT, probablemente causados por una limitada respiración del xilema y una baja resistencia a la difusión radial del CO2 impuestos por la sequía estival. Los pulsos de [CO2] observados tras las primeras lluvias de otoño apoyan esta idea. A lo largo del periodo vegetativo, el flujo medio de CO2 procedente del suelo (39 mol CO2 day-1) fue el mayor flujo respiratorio, tres y cuatro veces superior a RS (12 mol CO2 day-1) y RR (8-9 mol CO2 day-1), respectivamente. Ratios RR/RS menores que la unidad evidencian un importante peso de la respiración aérea como sumidero de carbono adicional. Finalmente, se ensayó el zanjado de raíces y el anillamiento de troncos como tratamientos selvícolas alternativos con el objetivo de aumentar las reservas de NSC en los troncos de las cepas. Los resultados preliminares desaconsejan el zanjado de raíces por el alto coste derivado posiblemente de la cicatrización de las heridas. El anillado de troncos imposibilitó el transporte de NSC a las raíces y aumentó la concentración de almidón por encima de la zona anillada, mientras que sistema radical se mantiene por los pies no anillados de la cepa. Son necesarias más mediciones y datos adicionales para comprobar el mantenimiento de esta respuesta positiva a largo plazo. Para concluir, destacamos la necesidad de estudios multidisciplinares que permitan una comprensión integral de la degradación de los rebollares ibéricos para poder aplicar a posteriori una gestión adecuada en estos montes bajos abandonados. ABSTRACT Quercus pyrenaica is a vigorous root-resprouting species intensively and historically coppiced for firewood, charcoal and woody pastures. Due to the rural exodus and the appearance of new energy sources, coppicing was abandoned towards 1970. Since then, tree overaging has resulted in stand stagnation displayed by slow stem growth, branch dieback, and scarce acorn production. The urgent need to find new alternative uses for abandoned coppices is recognized as one of the biggest challenges which currently faces Mediterranean silviculture; conversion into high forest by thinning is one of the preferred alternatives. For this aim, thinning has been broadly applied and seldom tested, although without a comprehensive understanding of the causes of stand stagnation. In this PhD study, we test the hypothesis of an imbalance between above- and below-ground organs, result of long term coppicing, as the underlying cause of Q. pyrenaica decay. In an experimental plot coppiced since at least the 12th century, genetic analyses were performed a priori to elucidate inconspicuous clonal structure of Q. pyrenaica to evaluate how clonal size affects the functioning of these multi-stemmed trees. Clonal size negatively affected diametric stem growth, whereas root respiration rates, measured by internal fluxes of CO2 through xylem (FT) and soil CO2 efflux, increased with clonal size. These results suggest root-to-shoot (R:S) imbalance intensifying with clonal size: periodic removal of aboveground organs whilst belowground organs remain undisturbed may have led to massive root systems which consume a great proportion of non-structural carbohydrates (NSC) for maintenance respiration, thus constraining aboveground performance. Furthermore, excavation of two multi-stemmed trees, composed by four and eight stems, revealed R:S ratios (0.5 and 1, respectively) greater than those reported for sexually regenerated trees. Moreover, as similarly observed in several root-resprouting species, NSC allocation to roots was favored ([NSC] > 20% in spring): a large proportion of sapwood maintained throughout the root system (52%) stored a remarkable NSC pool of 87 kg in the case of the largest clone. In this root system of the eight-stemmed tree, 248 root connections were counted and, by radiocarbon dating, its age was estimated to be 550-years-old. Persistence of massive, old and highly interconnected root systems suggests that enhanced belowground NSC storage and consumption reflects a trade-off between vegetative resilience and aboveground development. For a better understanding of tree carbon budget and the potential role of carbon starvation in Q. pyrenaica decay, internal and external stem CO2 fluxes and soil CO2 effluxes were monitored to evaluate respiratory costs above- and below-ground. On a seasonal scale, stem and root respiration (RS and RR) mirrored sap flow and stem growth dynamics. Respiration was determined to the greatest extent by external fluxes of CO2 to the atmosphere or soil, since FT accounted for a low proportion of RS and RR (< 10% and < 2%, respectively). On a diel scale, the contribution of FT to RS increased up to 25% at high transpiration rates. Comparatively low FT was determined by the low concentration of xylem CO2 registered ([CO2] as low as 0.11%), likely as a consequence of constrained xylem respiration and reduced resistance to CO2 radial diffusion imposed by summer drought. Xylem [CO2] pulses following first autumn rains support this idea. Averaged over the growing season, soil CO2 efflux was the greatest respiratory flux (39 mol CO2 day-1), three and four times greater than RS (12 mol CO2 day-1) and RR (8-9 mol CO2 day-1), respectively. Ratios of RR/RS below one evidence an additional and important weight of aboveground respiration as a tree carbon sink. Finally, root trenching and stem girdling were tested as complimentary treatments to thinning as a means to improve carbon reserves in stems of clonal trees. Preliminary results discouraged root trenching due to the high cost likely incurred for wound closure. Stem girdling successfully blocked NSC translocation downward, increasing starch concentrations above the girdled zone whilst the root system is fed by non-girdled stems within the clone. Further measurements and ancillary data are necessary to verify that this positive effect hold over time. To conclude, the need of multidisciplinary approaches for an integrative understanding on the functioning of abandoned Q pyrenaica coppices is highlighted for an appropriate management of these stands.

Influence of the training system on the agronomic behavior and grape composition of Albariño in Rías Baixas apellation

The aim of this study was to evaluate if early defoliation can be an alternative to bunch thinning in limiting yield and improving quality in grapes of the white cultivar Loureiro (Vitis vinifera L.), grafted onto 1103P. The field trial had been set up in a commercial vineyard in Vinhos Verdes Region (Northwest of Portugal, 41º 48? 53? N, 8º 24? 42? W). Treatments studied, performed five days before full bloom were: LR5 ? Leaf removal of the first five basal leaves, performed manually, LR8 ? Leave removal of the first eight basal leaves, LRM ? mechanical leaf removal and C ? the control, without defoliation. This paper reports the results of four years (2010-2013). The results presented a significant removal of main leaf area after defoliation principally in the most intensive treatment (LR8) but at harvest, the total leaf area had been compensated by lateral regrowth and no statistical differences between the treatments and the control were found. Early defoliation caused a decrease in fruit set and also a significant reduction in the diameter of the berry within the more severe defoliation treatments (LR5 and LR8). Yield factors were also significantly affected by the defoliation, causing a reduction of bunch weight and in 2013 a yield reduction in LR8 and LRM, and in 2010 in LR8. Conversely, LR5 presented a yield always similar to the control C. The reduction of cluster compactness and the substantial improvement of the microclimate at the cluster level significantly reduced bunch rot incidence in the defoliated modalities compared to control. No carry-over effects, along the four years trial were observed Early defoliation proved to be a canopy management technique that can have a strong impact in the final quality of grapes, reducing the compactness and lower the incidence and intensity of bunch rot, even if the reduction of yield observed in other papers had not been observed in all modalities.