Ni lo uno, ni lo otro: posibilidad de lo neutro en arquitectura

Esta investigación se ocupa de comprobar la viabilidad de un término, un concepto que se detecta como posible instrumento para nombrar algunas operaciones en arquitectura. Ese concepto es Lo Neutro. Frente al sistema de dualidades con el que enunciamos lo real, lo Neutro se sitúa, no tanto en el punto medio, como en el punto opuesto a ambos términos. No es la conjunción de contrarios, sino aquello que desvía la propia pregunta que obliga a elegir. Próximo a los conceptos de indefinición, indiferencia e inacción, lo Neutro se revela como un mecanismo fundamental de disolución. Reconociendo en la lengua varios sentidos para el término, con cada capítulo, la tesis va construyendo una definición ampliada de lo Neutro hasta configurar un conjunto de significados aplicables a la arquitectura. El primero de ellos es el que se deriva del concepto de indiferencia funcional. Tras un análisis del contexto teórico sobre el que se asienta la dialéctica bi-direccional forma-función, su consolidación en los primeros años del siglo XX y también su puesta en crisis mediante la introducción de nociones multi-relacionales como ‘entorno’ y ‘sistema’, la investigación propone tres modelos de estudio: la Planta Tipo, la Planta Única y la Planta de Equivalencias. En cada uno de estos casos, aunque el tema fundamental es la neutralidad programática, se reconoce también la presencia de los mecanismos geométricos y operaciones conceptuales que lo Neutro utiliza para generar respectivamente condiciones de ‘soporte’, de ‘marco’ o de ‘campo’. Estas tres condiciones espaciales apuntan a un entendimiento de lo Neutro que asocia su fórmula de doble negación (ni lo uno, ni lo otro) con el estado más incipiente de la materia, aquel en el que todavía no es pero que contiene ya todos los elementos de posibilidad de ser: lo Neutro como potencia. Aquello que la lógica nos impide afirmar, que una cosa es y no-es al mismo tiempo, nos lo concede la categoría aristotélica de la potencia. Por ello, en la última parte de la tesis se desarrollan de forma más autónoma aquellos temas vinculados con estos tres tipos de espacio que se basan en la renuncia, abordando la cuestión de la potencialidad desde la negación. Partiendo de dos condiciones superficiales básicas, la del muro vertical y la del suelo horizontal, se analizan algunos discursos basados en una restricción radical a estos dos elementos. Así, el muro ciego encuentra su precedente artístico en el lienzo en blanco y la tabula rasa se pone en relación con el concepto de ‘terrain vague’. Por último, la posibilidad de toda potencia de no actualizarse lleva a explorar el no-hacer como renuncia voluntaria y su capacidad de transformarse en acto de resistencia. ABSTRACT The concern of this research is to test the feasibility of a term, a concept that has been detected as a potential tool to name some architectural operations. That concept is the Neutral. In front of the dualities system with which we enounce the real, the Neutral places itself, not so much in the midpoint as in the opposite point of both terms. It is not the conjunction of the contraries, but that which deflects the question itself that compels us to make a choice. Recognizing the multiple interpretations of the term in the common language, with each chapter, the thesis builds an expanded definition of the Neutral to configure a set of meanings applicable to architecture. The first of them is the one that derives from the concept of functional indifference. After an analysis of the theoretical context in which the two-way dialectic between form and function lies, its consolidation in the early twentieth century and its call into crisis by the introduction of multi-relational concepts such as 'environment' and 'system', the research suggests three study models: the Typical Plan, the Single Plan and the Equivalents Plan. In each of these cases, although the fundamental issue is programmatic neutrality, it also recognizes the presence of geometric mechanisms and conceptual operations that the Neutral uses to generate respectively 'support', 'frame' or 'field' conditions. These three spatial conditions point to an understanding of the Neutral which associates its double negation formula (neither one nor the other) with the most incipient state of matter, that in which it not yet is, but already contains every element of the possibility of being: the neutral as potentiality. That which logic does not allow us to affirm, that one thing is and is-not at the same time, it is granted by the Aristotelian category of potentiality. Therefore, in the last part of the thesis, the topics relating these three types of space which are based on renouncement are more autonomously developed, addressing the issue of potentiality from the standpoint of denial. Starting from two basic surface conditions, the vertical wall and the horizontal floor, some speeches based on a radical restriction on these two elements are analyzed. Thus, the blind wall finds its artistic precedent in the blank canvas and the tabula rasa attitude gets in relation to the concept of ‘terrain vague’. Finally, the possibility of any potency of not being updated leads to explore the not-doing as voluntary resignation and its ability to transform itself into an act of resistance.

Ni lo uno, ni lo otro: posibilidad de lo neutro en arquitectura

Esta investigación se ocupa de comprobar la viabilidad de un término, un concepto que se detecta como posible instrumento para nombrar algunas operaciones en arquitectura. Ese concepto es Lo Neutro. Frente al sistema de dualidades con el que enunciamos lo real, lo Neutro se sitúa, no tanto en el punto medio, como en el punto opuesto a ambos términos. No es la conjunción de contrarios, sino aquello que desvía la propia pregunta que obliga a elegir. Próximo a los conceptos de indefinición, indiferencia e inacción, lo Neutro se revela como un mecanismo fundamental de disolución. Reconociendo en la lengua varios sentidos para el término, con cada capítulo, la tesis va construyendo una definición ampliada de lo Neutro hasta configurar un conjunto de significados aplicables a la arquitectura. El primero de ellos es el que se deriva del concepto de indiferencia funcional. Tras un análisis del contexto teórico sobre el que se asienta la dialéctica bi-direccional forma-función, su consolidación en los primeros años del siglo XX y también su puesta en crisis mediante la introducción de nociones multi-relacionales como ‘entorno’ y ‘sistema’, la investigación propone tres modelos de estudio: la Planta Tipo, la Planta Única y la Planta de Equivalencias. En cada uno de estos casos, aunque el tema fundamental es la neutralidad programática, se reconoce también la presencia de los mecanismos geométricos y operaciones conceptuales que lo Neutro utiliza para generar respectivamente condiciones de ‘soporte’, de ‘marco’ o de ‘campo’. Estas tres condiciones espaciales apuntan a un entendimiento de lo Neutro que asocia su fórmula de doble negación (ni lo uno, ni lo otro) con el estado más incipiente de la materia, aquel en el que todavía no es pero que contiene ya todos los elementos de posibilidad de ser: lo Neutro como potencia. Aquello que la lógica nos impide afirmar, que una cosa es y no-es al mismo tiempo, nos lo concede la categoría aristotélica de la potencia. Por ello, en la última parte de la tesis se desarrollan de forma más autónoma aquellos temas vinculados con estos tres tipos de espacio que se basan en la renuncia, abordando la cuestión de la potencialidad desde la negación. Partiendo de dos condiciones superficiales básicas, la del muro vertical y la del suelo horizontal, se analizan algunos discursos basados en una restricción radical a estos dos elementos. Así, el muro ciego encuentra su precedente artístico en el lienzo en blanco y la tabula rasa se pone en relación con el concepto de ‘terrain vague’. Por último, la posibilidad de toda potencia de no actualizarse lleva a explorar el no-hacer como renuncia voluntaria y su capacidad de transformarse en acto de resistencia. ABSTRACT The concern of this research is to test the feasibility of a term, a concept that has been detected as a potential tool to name some architectural operations. That concept is the Neutral. In front of the dualities system with which we enounce the real, the Neutral places itself, not so much in the midpoint as in the opposite point of both terms. It is not the conjunction of the contraries, but that which deflects the question itself that compels us to make a choice. Recognizing the multiple interpretations of the term in the common language, with each chapter, the thesis builds an expanded definition of the Neutral to configure a set of meanings applicable to architecture. The first of them is the one that derives from the concept of functional indifference. After an analysis of the theoretical context in which the two-way dialectic between form and function lies, its consolidation in the early twentieth century and its call into crisis by the introduction of multi-relational concepts such as 'environment' and 'system', the research suggests three study models: the Typical Plan, the Single Plan and the Equivalents Plan. In each of these cases, although the fundamental issue is programmatic neutrality, it also recognizes the presence of geometric mechanisms and conceptual operations that the Neutral uses to generate respectively 'support', 'frame' or 'field' conditions. These three spatial conditions point to an understanding of the Neutral which associates its double negation formula (neither one nor the other) with the most incipient state of matter, that in which it not yet is, but already contains every element of the possibility of being: the neutral as potentiality. That which logic does not allow us to affirm, that one thing is and is-not at the same time, it is granted by the Aristotelian category of potentiality. Therefore, in the last part of the thesis, the topics relating these three types of space which are based on renouncement are more autonomously developed, addressing the issue of potentiality from the standpoint of denial. Starting from two basic surface conditions, the vertical wall and the horizontal floor, some speeches based on a radical restriction on these two elements are analyzed. Thus, the blind wall finds its artistic precedent in the blank canvas and the tabula rasa attitude gets in relation to the concept of ‘terrain vague’. Finally, the possibility of any potency of not being updated leads to explore the not-doing as voluntary resignation and its ability to transform itself into an act of resistance.

Flow and wakes in large wind farms in complex terrain and offshore

Power losses due to wind turbine wakes are of the order of 10 and 20% of total power output in large wind farms. The focus of this research carried out within the EC funded UPWIND project is wind speed and turbulence modelling for large wind farms/wind turbines in complex terrain and offshore in order to optimise wind farm layouts to reduce wake losses and loads.

Flow and wakes in complex terrain and offshore. Model development and verification in UPWIND

The paper presents research conducted in the Flow workpackage of the EU funded UPWIND project which focuses on improving models for flow within and downwind of large wind farms in complex terrain and offshore. The main activity is modelling the behaviour of wind turbine wakes in order to improve power output predictions.

Sensitivity analysis on turbulence models for the ABL in complex terrain

Análisis de sensibilidad de modelos de turbulencia para un modelo CFD de viento aplicados a un emplazamiento en terreno complejo. Validación con datos de viento y turbulencia registrados a 3 alturas en 3 torres de medida.

Simulation of wind farms in flat and complex terrain using CFD

Use of computational fluid dynamic (CFD) methods to predict the power production from wind entire wind farms in flat and complex terrain is presented in this paper. Two full 3D Navier–Stokes solvers for incompressible flow are employed that incorporate the k–ε and k–ω turbulence models respectively. The wind turbines (W/Ts) are modelled as momentum absorbers by means of their thrust coefficient using the actuator disk approach. The WT thrust is estimated using the wind speed one diameter upstream of the rotor at hub height. An alternative method that employs an induction-factor based concept is also tested. This method features the advantage of not utilizing the wind speed at a specific distance from the rotor disk, which is a doubtful approximation when a W/T is located in the wake of another and/or the terrain is complex. To account for the underestimation of the near wake deficit, a correction is introduced to the turbulence model. The turbulence time scale is bounded using the general “realizability” constraint for the turbulent velocities. Application is made on two wind farms, a five-machine one located in flat terrain and another 43-machine one located in complex terrain. In the flat terrain case, the combination of the induction factor method along with the turbulence correction provides satisfactory results. In the complex terrain case, there are some significant discrepancies with the measurements, which are discussed. In this case, the induction factor method does not provide satisfactory results.

CFD modelling of wind farms in complex terrain

Modelling of entire wind farms in flat and complex terrain using a full 3D Navier–Stokes solver for incompressible flow is presented in this paper. Numerical integration of the governing equations is performed using an implicit pressure correction scheme, where the wind turbines (W/Ts) are modelled as momentum absorbers through their thrust coefficient. The k–ω turbulence model, suitably modified for atmospheric flows, is employed for closure. A correction is introduced to account for the underestimation of the near wake deficit, in which the turbulence time scale is bounded using a general “realizability” constraint for the fluctuating velocities. The second modelling issue that is discussed in this paper is related to the determination of the reference wind speed for the thrust calculation of the machines. Dealing with large wind farms and wind farms in complex terrain, determining the reference wind speed is not obvious when a W/T operates in the wake of another WT and/or in complex terrain. Two alternatives are compared: using the wind speed value at hub height one diameter upstream of the W/T and adopting an induction factor-based concept to overcome the utilization of a wind speed at a certain distance upwind of the rotor. Application is made in two wind farms, a five-machine one located in flat terrain and a 43-machine one located in complex terrain.

Analysis and validation of CFD wind farm models in complex terrain. Effects induced by topography and wind turbines

Wind farms have been extensively simulated through engineering models for the estimation of wind speed and power deficits inside wind farms. These models were designed initially for a few wind turbines located in flat terrain. Other models based on the parabolic approximation of Navier Stokes equations were developed, making more realistic and feasible the operational resolution of big wind farms in flat terrain and offshore sites. These models have demonstrated to be accurate enough when solving wake effects for this type of environments. Nevertheless, few analyses exist on how complex terrain can affect the behaviour of wind farm wake flow. Recent numerical studies have demonstrated that topographical wakes induce a significant effect on wind turbines wakes, compared to that on flat terrain. This circumstance has recommended the development of elliptic CFD models which allow global simulation of wind turbine wakes in complex terrain. An accurate simplification for the analysis of wind turbine wakes is the actuator disk technique. Coupling this technique with CFD wind models enables the estimation of wind farm wakes preserving the extraction of axial momentum present inside wind farms. This paper describes the analysis and validation of the elliptical wake model CFDWake 1.0 against experimental data from an operating wind farm located in complex terrain. The analysis also reports whether it is possible or not to superimpose linearly the effect of terrain and wind turbine wakes. It also represents one of the first attempts to observe the performance of engineering models compares in large complex terrain wind farms.

Modelling wake effects in large wind farms in complex terrain: the problem, the methods and the issues

Computational fluid dynamic (CFD) methods are used in this paper to predict the power production from entire wind farms in complex terrain and to shed some light into the wake flow patterns. Two full three-dimensional Navier–Stokes solvers for incompressible fluid flow, employing k − ϵ and k − ω turbulence closures, are used. The wind turbines are modeled as momentum absorbers by means of their thrust coefficient through the actuator disk approach. Alternative methods for estimating the reference wind speed in the calculation of the thrust are tested. The work presented in this paper is part of the work being undertaken within the UpWind Integrated Project that aims to develop the design tools for next generation of large wind turbines. In this part of UpWind, the performance of wind farm and wake models is being examined in complex terrain environment where there are few pre-existing relevant measurements. The focus of the work being carried out is to evaluate the performance of CFD models in large wind farm applications in complex terrain and to examine the development of the wakes in a complex terrain environment.

How vague can your patent be? Vagueness strategies in U.S. patents

Patent claims defi ne the protection scope of the intellectual property sought by the patent applicant or patentee. Broad claims are valuable as they can describe more expansive rights to the invention. Therefore, if these claims are too broad a potential infringer will more easily argue against them. But if the claims are too narrow the scope of protection of the intellectual property is greatly reduced. Patent claims have to be, on the one hand, determinate and precise enough and, on the other hand, as inclusive as possible. Therefore patent applicants must fi nd a balance in the broadness of the scope defi ned by their claims. This balance can be achieved by the choice of words with a convenient degree of semantic indeterminacy, by the choice of modifi ers or other strategies. In fact, vagueness in patent claims is a desirable characteristic for such documents. A quantitative and qualitative analysis of a corpus of 350 U.S. patents provides a promising starting point to understand the linguistic instruments used to achieve the balance between property claim scope and precision of property description. To conclude, some issues relating vagueness and pragmatics are suggested as a line of further research.

Aerial video geo-registration using terrain models from dense and coherent stereo matching

In the context of aerial imagery, one of the first steps toward a coherent processing of the information contained in multiple images is geo-registration, which consists in assigning geographic 3D coordinates to the pixels of the image. This enables accurate alignment and geo-positioning of multiple images, detection of moving objects and fusion of data acquired from multiple sensors. To solve this problem there are different approaches that require, in addition to a precise characterization of the camera sensor, high resolution referenced images or terrain elevation models, which are usually not publicly available or out of date. Building upon the idea of developing technology that does not need a reference terrain elevation model, we propose a geo-registration technique that applies variational methods to obtain a dense and coherent surface elevation model that is used to replace the reference model. The surface elevation model is built by interpolation of scattered 3D points, which are obtained in a two-step process following a classical stereo pipeline: first, coherent disparity maps between image pairs of a video sequence are estimated and then image point correspondences are back-projected. The proposed variational method enforces continuity of the disparity map not only along epipolar lines (as done by previous geo-registration techniques) but also across them, in the full 2D image domain. In the experiments, aerial images from synthetic video sequences have been used to validate the proposed technique.

Technical criteria for the desing of foundation slabs and perimetral wall in difficult terrain in Madrid. Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Technical criteria for the design of foundation slabs and perimetral wall in difficult terrain in south east Madrid, Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Lidar uncertainty in complex terrain development of a bias correction methodology

El autor ha trabajado como parte del equipo de investigación en mediciones de viento en el Centro Nacional de Energías Renovables (CENER), España, en cooperación con la Universidad Politécnica de Madrid y la Universidad Técnica de Dinamarca. El presente reporte recapitula el trabajo de investigación realizado durante los últimos 4.5 años en el estudio de las fuentes de error de los sistemas de medición remota de viento, basados en la tecnología lidar, enfocado al error causado por los efectos del terreno complejo. Este trabajo corresponde a una tarea del paquete de trabajo dedicado al estudio de sistemas remotos de medición de viento, perteneciente al proyecto de intestigación europeo del 7mo programa marco WAUDIT. Adicionalmente, los datos de viento reales han sido obtenidos durante las campañas de medición en terreno llano y terreno complejo, pertenecientes al también proyecto de intestigación europeo del 7mo programa marco SAFEWIND. El principal objetivo de este trabajo de investigación es determinar los efectos del terreno complejo en el error de medición de la velocidad del viento obtenida con los sistemas de medición remota lidar. Con este conocimiento, es posible proponer una metodología de corrección del error de las mediciones del lidar. Esta metodología está basada en la estimación de las variaciones del campo de viento no uniforme dentro del volumen de medición del lidar. Las variaciones promedio del campo de viento son predichas a partir de los resultados de las simulaciones computacionales de viento RANS, realizadas para el parque experimental de Alaiz. La metodología de corrección es verificada con los resultados de las simulaciones RANS y validadas con las mediciones reales adquiridas en la campaña de medición en terreno complejo. Al inicio de este reporte, el marco teórico describiendo el principio de medición de la tecnología lidar utilizada, es presentado con el fin de familiarizar al lector con los principales conceptos a utilizar a lo largo de este trabajo. Posteriormente, el estado del arte es presentado en donde se describe los avances realizados en el desarrollo de la la tecnología lidar aplicados al sector de la energía eólica. En la parte experimental de este trabajo de investigación se ha estudiado los datos adquiridos durante las dos campañas de medición realizadas. Estas campañas has sido realizadas en terreno llano y complejo, con el fin de complementar los conocimiento adquiridos en casa una de ellas y poder comparar los efectos del terreno en las mediciones de viento realizadas con sistemas remotos lidar. La primer campaña experimental se desarrollo en terreno llano, en el parque de ensayos de aerogeneradores H0vs0re, propiedad de DTU Wind Energy (anteriormente Ris0). La segunda campaña experimental se llevó a cabo en el parque de ensayos de aerogeneradores Alaiz, propiedad de CENER. Exactamente los mismos dos equipos lidar fueron utilizados en estas campañas, haciendo de estos experimentos altamente relevantes en el contexto de evaluación del recurso eólico. Un equipo lidar está basado en tecnología de onda continua, mientras que el otro está basado en tecnología de onda pulsada. La velocidad del viento fue medida, además de con los equipos lidar, con anemómetros de cazoletas, veletas y anemómetros verticales, instalados en mástiles meteorológicos. Los sensores del mástil meteorológico son considerados como las mediciones de referencia en el presente estudio. En primera instancia, se han analizado los promedios diez minútales de las medidas de viento. El objetivo es identificar las principales fuentes de error en las mediciones de los equipos lidar causadas por diferentes condiciones atmosféricas y por el flujo no uniforme de viento causado por el terreno complejo. El error del lidar ha sido estudiado como función de varias propiedades estadísticas del viento, como lo son el ángulo vertical de inclinación, la intensidad de turbulencia, la velocidad vertical, la estabilidad atmosférica y las características del terreno. El propósito es usar este conocimiento con el fin de definir criterios de filtrado de datos. Seguidamente, se propone una metodología para corregir el error del lidar causado por el campo de viento no uniforme, producido por la presencia de terreno complejo. Esta metodología está basada en el análisis matemático inicial sobre el proceso de cálculo de la velocidad de viento por los equipos lidar de onda continua. La metodología de corrección propuesta hace uso de las variaciones de viento calculadas a partir de las simulaciones RANS realizadas para el parque experimental de Alaiz. Una ventaja importante que presenta esta metodología es que las propiedades el campo de viento real, presentes en las mediciones instantáneas del lidar de onda continua, puede dar paso a análisis adicionales como parte del trabajo a futuro. Dentro del marco del proyecto, el trabajo diario se realizó en las instalaciones de CENER, con supervisión cercana de la UPM, incluyendo una estancia de 1.5 meses en la universidad. Durante esta estancia, se definió el análisis matemático de las mediciones de viento realizadas por el equipo lidar de onda continua. Adicionalmente, los efectos del campo de viento no uniforme sobre el error de medición del lidar fueron analíticamente definidos, después de asumir algunas simplificaciones. Adicionalmente, durante la etapa inicial de este proyecto se desarrollo una importante trabajo de cooperación con DTU Wind Energy. Gracias a esto, el autor realizó una estancia de 1.5 meses en Dinamarca. Durante esta estancia, el autor realizó una visita a la campaña de medición en terreno llano con el fin de aprender los aspectos básicos del diseño de campañas de medidas experimentales, el estudio del terreno y los alrededores y familiarizarse con la instrumentación del mástil meteorológico, el sistema de adquisición y almacenamiento de datos, así como de el estudio y reporte del análisis de mediciones. ABSTRACT The present report summarizes the research work performed during last 4.5 years of investigation on the sources of lidar bias due to complex terrain. This work corresponds to one task of the remote sensing work package, belonging to the FP7 WAUDIT project. Furthermore, the field data from the wind velocity measurement campaigns of the FP7 SafeWind project have been used in this report. The main objective of this research work is to determine the terrain effects on the lidar bias in the measured wind velocity. With this knowledge, it is possible to propose a lidar bias correction methodology. This methodology is based on an estimation of the wind field variations within the lidar scan volume. The wind field variations are calculated from RANS simulations performed from the Alaiz test site. The methodology is validated against real scale measurements recorded during an eight month measurement campaign at the Alaiz test site. Firstly, the mathematical framework of the lidar sensing principle is introduced and an overview of the state of the art is presented. The experimental part includes the study of two different, but complementary experiments. The first experiment was a measurement campaign performed in flat terrain, at DTU Wind Energy H0vs0re test site, while the second experiment was performed in complex terrain at CENER Alaiz test site. Exactly the same two lidar devices, based on continuous wave and pulsed wave systems, have been used in the two consecutive measurement campaigns, making this a relevant experiment in the context of wind resource assessment. The wind velocity was sensed by the lidars and standard cup anemometry and wind vanes (installed on a met mast). The met mast sensors are considered as the reference wind velocity measurements. The first analysis of the experimental data is dedicated to identify the main sources of lidar bias present in the 10 minute average values. The purpose is to identify the bias magnitude introduced by different atmospheric conditions and by the non-uniform wind flow resultant of the terrain irregularities. The lidar bias as function of several statistical properties of the wind flow like the tilt angle, turbulence intensity, vertical velocity, atmospheric stability and the terrain characteristics have been studied. The aim of this exercise is to use this knowledge in order to define useful lidar bias data filters. Then, a methodology to correct the lidar bias caused by non-uniform wind flow is proposed, based on the initial mathematical analysis of the lidar measurements. The proposed lidar bias correction methodology has been developed focusing on the the continuous wave lidar system. In a last step, the proposed lidar bias correction methodology is validated with the data of the complex terrain measurement campaign. The methodology makes use of the wind field variations obtained from the RANS analysis. The results are presented and discussed. The advantage of this methodology is that the wind field properties at the Alaiz test site can be studied with more detail, based on the instantaneous measurements of the CW lidar. Within the project framework, the daily basis work has been done at CENER, with close guidance and support from the UPM, including an exchange period of 1.5 months. During this exchange period, the mathematical analysis of the lidar sensing of the wind velocity was defined. Furthermore, the effects of non-uniform wind fields on the lidar bias were analytically defined, after making some assumptions for the sake of simplification. Moreover, there has been an important cooperation with DTU Wind Energy, where a secondment period of 1.5 months has been done as well. During the secondment period at DTU Wind Energy, an important introductory learning has taken place. The learned aspects include the design of an experimental measurement campaign in flat terrain, the site assessment study of obstacles and terrain conditions, the data acquisition and processing, as well as the study and reporting of the measurement analysis.

Propagation of DEM Varying Accuracy into Terrain-Based Analysis.

Análisis de precisión en modelos digitales de elevación globales. ABSTRACT: Terrain-Based Analysis results in derived products from an input DEM and these products are needed to perform various analyses. To efficiently use these products in decision-making, their accuracies must be estimated systematically. This paper proposes a procedure to assess the accuracy of these derived products, by calculating the accuracy of the slope dataset and its significance, taking as an input the accuracy of the DEM. Based on the output of previously published research on modeling the relative accuracy of a DEM, specifically ASTER and SRTM DEMs with Lebanon coverage as the area of study, analysis have showed that ASTER has a low significance in the majority of the area where only 2% of the modeled terrain has 50% or more significance. On the other hand, SRTM showed a better significance, where 37% of the modeled terrain has 50% or more significance. Statistical analysis deduced that the accuracy of the slope dataset, calculated on a cell-by-cell basis, is highly correlated to the accuracy of the input DEM. However, this correlation becomes lower between the slope accuracy and the slope significance, whereas it becomes much higher between the modeled slope and the slope significance.