Models for Lateral Dynamic Interaction of High-Speed Trains and Bridges

In this work a methodology for analysing the lateral coupled behavior of large viaducts and high-speed trains is proposed. The finite element method is used for the structure, multibody techniques are applied for vehicles and the interaction between them is established introducing wheel-rail nonlinear contact forces. This methodology is applied for the analysis of the railway viaduct of the R´ıo Barbantino, which is a very long and tall bridge in the north-west spanish high-speed line.

Robust rolling stock in rapid transit network

This paper focuses on the railway rolling stock circulation problem in rapid transit networks, in which frequencies are high and distances are relatively short. Although the distances are not very large, service times are high due to the large number of intermediate stops required to allow proper passenger flow. The main complicating issue is the fact that the available capacity at depot stations is very low, and both capacity and rolling stock are shared between different train lines. This forces the introduction of empty train movements and rotation maneuvers, to ensure sufficient station capacity and rolling stock availability. However, these shunting operations may sometimes be difficult to perform and can easily malfunction, causing localized incidents that could propagate throughout the entire network due to cascading effects. This type of operation will be penalized with the goal of selectively avoiding them and ameliorating their high malfunction probabilities. Critic trains, defined as train services that come through stations that have a large number of passengers arriving at the platform during rush hours, are also introduced. We illustrate our model using computational experiments drawn from RENFE (the main Spanish operator of suburban passenger trains) in Madrid, Spain. The results of the model, achieved in approximately 1 min, have been received positively by RENFE planners

Local burning velocity in a Bunsen jet flame

A PIV-based system has been set-up for the simultaneous measurement of the local burning velocity of premixed flames and the flame stretch due to the flame front curvature and the incoming flow strain rate. For moderately short jet flames, these measurements allow an indirect determination of the Markstein length, according to Clavin and Joulin (C–J) theory. For tall flames, the flame curvature becomes relatively large in a region around the tip where the C–J theory breaks down. However, our experiments confirm the appearance of a new linear relation between burning velocity and curvature at the flame tip. This relation defines a new proportionality factor which is probably associated to the evolution from rounded tips to slender tips when the jet velocity is increased.

The Dynamics of High-Speed Railway Bridges: A Review of Design Issues and New Research for Lateral Dynamics

The dynamic effects of high-speed trains on viaducts are important issues for the design of the structures, as well as for the consideration of safe running conditions for the trains. In this work we start by reviewing the relevance of some basic design aspects. The significance of impact factor envelopes for moving loads is considered first. Resonance which may be achieved for high-speed trains requires dynamic analysis, for which some key aspects are discussed. The relevance of performing a longitudinal distribution of axle loads, the number of modes taken in analysis, and the consideration of vehicle-structure interaction are discussed with representative examples. The lateral dynamic effects of running trains on bridges is of importance for laterally compliant viaducts, such as some very tall structures erected in new high-speed lines. The relevance of this study is mainly for the safety of the traffic, considering both internal actions such as the hunting motion as well as external actions such as wind or earthquakes [1]. These studies require three-dimensional dynamic coupled vehicle-bridge models, and consideration of wheel to rail contact, a phenomenon which is complex and costly to model in detail. We describe here a fully nonlinear coupled model, described in absolute coordinates and incorporated into a commercial finite element framework [2]. The wheel-rail contact has been considered using a FastSim algorithm which provides a compromise between accuracy and computational cost, and captures the main nonlinear response of the contact interface. Two applications are presented, firstly to a vehicle subject to a strong wind gust traversing a bridge, showing the relevance of the nonlinear wheel-rail contact model as well as the dynamic interaction between bridge and vehicle. The second application is to a real HS viaduct with a long continuous deck and tall piers and high lateral compliance [3]. The results show the safety of the traffic as well as the importance of considering features such as track alignment irregularities.

Efectos dinámicos laterales en vehículos y puentes ferroviarios sometidos a la acción de vientos transversales

En las últimas décadas el aumento de la velocidad y la disminución del peso de los vehículos ferroviarios de alta velocidad ha provocado que aumente su riesgo de vuelco. Además, las exigencias de los trazados de las líneas exige en ocasiones la construcción de viaductos muy altos situados en zonas expuestas a fuertes vientos. Esta combinación puede poner en peligro la seguridad de la circulación. En esta tesis doctoral se estudian los efectos dinámicos que aparecen en los vehículos ferroviarios cuando circulan sobre viaductos en presencia de vientos transversales. Para ello se han desarrollado e implementado una serie de modelos numéricos que permiten estudiar estos efectos de una forma realista y general. Los modelos desarrollados permiten analizar la interacción dinámica tridimensional tren-estructura, formulada mediante coordenadas absolutas en un sistema de referencia inercial, en un contexto de elementos _nitos no lineales. Mediante estos modelos se pueden estudiar de forma realista casos extremos como el vuelco o descarrilamiento de los vehículos. Han sido implementados en Abaqus, utilizando sus capacidades para resolver sistemas multi-cuerpo para el vehículo y elementos finitos para la estructura. La interacción entre el vehículo y la estructura se establece a través del contacto entre rueda y carril. Para ello, se han desarrollado una restricción, que permite establecer la relación cinemática entre el eje ferroviario y la vía, teniendo en cuenta los posibles defectos geométricos de la vía; y un modelo de contacto rueda-carril para establecer la interacción entre el vehículo y la estructura. Las principales características del modelo de contacto son: considera la geometría real de ambos cuerpos de forma tridimensional; permite resolver situaciones en las que el contacto entre rueda y carril se da en más de una zona a la vez; y permite utilizar distintas formulaciones para el cálculo de la tensión tangencial entre ambos cuerpos. Además, se ha desarrollado una metodología para determinar, a partir de formulaciones estocásticas, las historias temporales de cargas aerodinámicas debidas al viento turbulento en estructuras grandes y con pilas altas y flexibles. Esta metodología tiene cuenta la variabilidad espacial de la velocidad de viento, considerando la correlación entre los distintos puntos; considera las componentes de la velocidad del viento en tres dimensiones; y permite el cálculo de la velocidad de viento incidente sobre los vehículos que atraviesan la estructura. La metodología desarrollada en este trabajo ha sido implementada, validada y se ha aplicado a un caso concreto en el que se ha estudiado la respuesta de un tren de alta velocidad, similar al Siemens Velaro, circulando sobre el viaducto del río Ulla en presencia viento cruzado. En este estudio se ha analizado la seguridad y el confort de la circulación y la respuesta dinámica de la estructura cuando el tren cruza el viaducto. During the last decades the increase of the speed and the reduction of the weight of high-speed railway vehicles has led to a rise of the overturn risk. In addition, the design requests of the railway lines require some times the construction of very tall viaducts in strong wind areas. This combination may endanger the traffic safety. In this doctoral thesis the dynamic effects that appear in the railway vehicles when crossing viaducts under strong winds are studied. For this purpose it has been developed and implemented numerical models for studying these effects in a realistic and general way. The developed models allow to analyze the train-structure three-dimensional dynamic interaction, that is formulated by using absolute coordinates in an inertial reference frame within a non-linear finite element framework. By means of these models it is possible to study in a realistic way extreme situations such vehicle overturn or derailment. They have been implemented for Abaqus, by using its capabilities for solving multi-body systems for the vehicle and finite elements for the structure. The interaction between the vehicle and the structure is established through the wheel-rail contact. For this purpose, a constraint has been developed. It allows to establish the kinematic relationship between the railway wheelset and the track, taking into account the track irregularities. In addition, a wheel-rail contact model for establishing the interaction of the vehicle and the structure has been developed. The main features of the contact model are: it considers the real geometry During the last decades the increase of the speed and the reduction of the weight of high-peed railway vehicles has led to a rise of the overturn risk. In addition, the design requests of the railway lines require some times the construction of very tall viaducts in strong wind areas. This combination may endanger the traffic safety. In this doctoral thesis the dynamic effects that appear in the railway vehicles when crossing viaducts under strong winds are studied. For this purpose it has been developed and implemented numerical models for studying these effects in a realistic and general way. The developed models allow to analyze the train-structure three-dimensional dynamic interaction, that is formulated by using absolute coordinates in an inertial reference frame within a non-linear finite element framework. By means of these models it is possible to study in a realistic way extreme situations such vehicle overturn or derailment. They have been implemented for Abaqus, by using its capabilities for solving multi-body systems for the vehicle and finite elements for the structure. The interaction between the vehicle and the structure is established through the wheel-rail contact. For this purpose, a constraint has been developed. It allows to establish the kinematic relationship between the railway wheelset and the track, taking into account the track irregularities. In addition, a wheel-rail contact model for establishing the interaction of the vehicle and the structure has been developed. The main features of the contact model are: it considers the real geometry

Analysis of lateral dynamics of railway vehicles on viaducts with coupled models

The study of lateral dynamics of running trains on bridges is of importance mainly for the safety of the traffic, and may be relevant for laterally compliant bridges. These studies require 3D coupled vehicle-bridge models, and consideration of wheel to rail contact, a phenomenon which is complex and costly to model in detail. We describe here a fully nonlinear coupled model, described in absolute coordinates and incorporated into a commercial finite element framework. Two applications are presented, firstly to a vehicle subject to a strong wind gust traversing a br idge, showing the relevance of the nonlinear wheel-rail contact model as well as the interaction between bridge and vehicle. The second application is to a real viaduct in a high-speed line, with a long continuous deck and tall piers with high lateral compliance. The results show the safety of the traffic as well as the relevance of considering the wind action and the nonlinear response.

Dinámica vegetal desde el tardiglaciar en la cuenca del Duero: interacciones con clima, fuego e impacto humano

La cuenca del Duero constituye un vasto territorio ibérico cuyo paisaje se encuentra actualmente muy alterado por la mano del hombre y es prácticamente imposible localizar alguna manifestación de su cubierta vegetal natural. Aunque la historia de la vegetación en los sectores central y oriental es relativamente bien conocida, en su mitad occidental los registros paleoecológicos estudiados hasta la fecha son prácticamente inexistentes. Esto hace que se desconozca la respuesta de la vegetación a las diferentes oscilaciones climáticas que se han producido desde el Último Máximo Glaciar, cuál fue el impacto de las diferentes culturas sobre el medio, cuándo se produjo una alteración profunda de la vegetación natural y cuál ha sido la historia de los incendios. Este último aspecto, el papel e importancia de los incendios, reviste un especial interés en la península Ibérica dada su situación geográfica y climática dentro de la cuenca Mediterránea, donde el fuego es un factor ecológico de primer nivel. Las distintas técnicas paleoecológicas son las más adecuadas para abordar todas estas preguntas. De este modo, los avatares de la vegetación a través del tiempo se han reconstruido mediante el análisis polínico y de macrofósiles, el impacto humano se ha trazado utilizando indicadores polínicos ligados a actividades antrópicas y esporas de hongos coprófilos, estudiándose los incendios a partir del registro de partículas microscópicas de carbón. La alta resolución temporal y taxonómica alcanzada en estos análisis, así como la amplia superficie abarcada con los yacimientos estudiados, hacen que la información obtenida sea altamente detallada y complete el conocimiento que se tiene sobre la cuenca del Duero. El Tardiglaciar se registra por primera vez en la Meseta Norte Ibérica en la secuencia de Ayoó de Vidriales, donde una vegetación esteparia prácticamente desarbolada domina durante los periodos fríos. Durante el interestadial Bølling/Allerød la expansión forestal (pinos, abedules) fue muy leve y tardía y fue interrumpida bruscamente por el Dryas Reciente. Al final del Dryas Reciente o al inicio del Holoceno se produjo una acusada y rápida expansión de los bosques. Esta dinámica sugiere que no hubo refugios glaciares importantes en esta zona de la Meseta durante el “Mystery Interval”, aparentemente el periodo más frío y seco. Los incendios fueron muy escasos, aumentando de forma muy brusca al inicio del Holoceno por el aumento de biomasa y las condiciones relativamente cálidas y secas. A partir de los registros de Ayoó y El Maíllo se consolida la importancia del gradiente oceanicidad-continentalidad en el Sistema Central y la Meseta Norte, que se manifiesta principalmente en la dominancia más prolongada de los pinares hacia el interior. Además, otra de las principales contribuciones de la presente tesis es proporcionar evidencia sobre la sucesión de distintos tipos de bosques en el noroeste de la Meseta, precisando el marco temporal en el que suceden. Así, se ha constatado que hubo un máximo desarrollo del bosque caducifolio durante el Holoceno medio en Ayoó de Vidriales y una baja incidencia del fuego que sugieren que el clima fue más húmedo que en el Holoceno inicial. El estudio de macrofósiles leñosos ha permitido detectar procesos que con el análisis polínico habrían pasado desapercibidos, como la persistencia hasta el Holoceno final de Pinus sylvestris en la sierra del Teleno y la sustitución de P. sylvestris por P. pinaster en la sierra de Francia durante el Holoceno inicial. También el estudio de los carbones procedentes de los arenales de Tierra de Pinares han proporcionado la prueba definitiva de la naturalidad de los pinares de P. pinaster. El impacto humano se detecta temprano en las secuencias del oeste de la cuenca del Duero, durante el Neolítico, aunque ha sido mucho más acusado desde la Edad del Hierro (ca 2700-2500 años cal BP). Para la detección del impacto humano temprano ha sido clave el análisis de esporas de hongos coprófilos, cuyo análisis fue incorporado en la secuencia de Ayoó de Vidriales. Una de sus principales consecuencias fue el establecimiento de comunidades de matorral (brezales, piornales) sobre amplias extensiones del occidente de la cuenca del Duero, vinculado al recrudecimiento de los regímenes de incendios. A pesar de que los incendios han sido ecológicamente importantes desde el inicio del Holoceno, los cambios introducidos por el hombre en sus regímenes sobrepasaron la resiliencia de los bosques originales, lo cual condujo a su sustitución sostenida por matorrales. ABSTRACT The Duero Basin constitutes a vast Iberian territory which is currently strongly disturbed due to human activities, so it is very difficult to find any remnant of the natural vegetation. Vegetation history for the eastern and western sectors of the Basin is relatively well-known but, in contrast, there is an almost complete lack of palaeoecological record in the western area. Consequently, there exists a profound ignorance about vegetation responses to the climatic oscillations occurred since the Last Glacial Maximum, the environmental impact of the different cultures, when a severe disturbance of the natural vegetation took place and fire history. The last question, the role and importance of fire, has a special interest in the Iberian Peninsula due to its geographic and climatic framework, the Mediterranean Basin, where fire is a major ecological factor. The diverse palaeoecological techmiques are the most suitable tools to address all these questions. Thus, vegetation shifts through time have been reconstructed using pollen and macrofossil analyses, human impact has been tracked by means of anthropogenic pollen indicators and dung fungal spores, while fire history has been studied from the quantification of microscopic charcoal particles. The high taxonomic and time resolution attained along with the extensive surface covered by the studied sites provide detailed information very useful to complete the knowledge on landscape dynamics in the Duero Basin. The Lateglacial is recorded for the first time in the Northern Iberian Plateau in the sequence from Ayoó de Vidriales, showing that almost treeless steppic vegetation dominated during the cold periods. Tree expansion (pines, birches) was late and slight during the Bølling/Allerød interstadial and was sharply interrupted by the Younger Dryas (YD) climatic reversal. By the end of the YD or the onset of the Holocene, a rapid forest expansion occurred. This forest dynamics suggests an absence of important glacial refugia for trees in this area of the Plateau during the Mystery Interval, apparently the coldest and driest period. Fires were fairly rare, increasing abruptly at the beginning of the Holocene due to the relatively warm and dry climate and the accumulation of biomass. The records from Ayoó and El Maíllo reinforce the role of the oceanicity-continentality gradient in the vegetation history of the Iberian Central Range and the Iberian Northern Plateau, reflected mainly in the longer dominance of pine forests towards inland areas. Further, another important contribution of this PhD Thesis is providing evidence on the succession of different forest types in the northestern fringe of the Plateau, specifying the chronological framework. A maximum of deciduous forest development and low fire activity have been detected in Ayoó de Vidriales during the mid-Holocene, suggesting that climate was wetter than in the early Holocene. The study of woody macrofossils has allowed detecting processes which would have remained unnoticed using pollen analysis alone, such as the persistence of Pinus sylvestris until the late Holocene in the Teleno Mountains and the early Holocene replacement of P. sylvestris with P. pinaster in the sierra de Francia range. The study of macroscopic charcoal fragments from palaeosols of the Tierra de Pinares has also provided the definitive proof of naturalness for the P. pinaster stands gorwing over this area at present. Early human impact, during the Neolithic, has been detected in the sequences from the western sector of the Duero Basin, although human disturbance has been more severe from the Iron Age onwards (ca 2700-2500 cal yr BP). The analysis of coprophilous fungi incorporated in the sequence of Ayoó de Vidriales has played a key role in recognizing that early human impact. One of the main consequences of human disturbance was the establishment of shrubland communities (heaths, brooms) over huge areas of the western Duero Basin, linked to severe and/or frequent fires. Despite fires has been ecologically important since the onset of the Holocene, human-induced changes in fire regimes have exceeded the resilience of original forests leading to a sustained replacement with shrublands.

Space-time analysis of the urban-rural grafient in the metropolitan area of Madrid and ist surroundings -Guadalajara and Toledo.

According to UN provisions in the period from 2007 to 2050 world population will grow up to 9200 million people. In fact, for the first time in history, in the year 2008 world urban population became higher than rural population. The increase of urban areas and their transport infrastructures has influenced agricultural land use due to their irreversible change, especially when they remain as periurban vacant land, losing their character and identity. In the Europe of the nineties, the traditional urban-rural gradient, characterized by a neat contact between both land types, has become so complex that it has change to a gradient in which it is difficult to separate urban and rural land uses. [Antrop 2004]. A literature review has been made on methodologies used for the urban-rural gradient analysis. One of these methodologies was selected that integrates ecological characterization based on the use of spatial metrics and geographical characterization based on spatial components. Cartographical sources used were Corine Land Cover at 1: 100000 scale and the Spanish Land Use Information System at 1:25000 scale. Urban-rural gradient paradigm is an analysis methodology, coming from landscape ecology, which enables to investigate how urbanization provokes changes in ecological patterns and processes into landscape. [Hahs and McDonnell 2006].The present research adapt this methodology to study the urban-rural gradient in the outskirts of Madrid, Toledo and Guadalajara. Both scales (1:25000 and 1:100000) were simultaneously used to reach the next objectives: 1) Analysis of landscape pattern dynamics in relation to distance to the town centre and major infrastructures. 2) Analysis of landscape pattern dynamics in the fringe of protected areas. The paper presents a new approach to the urban-rural relationship which allows better planning and management of urban áreas.

Investigación experimental del flujo aerodinámico sobre helipuertos embarcados

La investigación del flujo aerodinámico sobre helipuertos embarcados se encuentra estrechamente relacionada con la operación segura de las aeronaves, pues las condiciones del flujo que tiene lugar en ese entorno pueden exceder los límites para los que están certificadas dichas aeronaves. El ambiente aerodinámico en las inmediaciones de un barco es altamente complejo y se encuentra influenciado por gran número de factores (chimeneas, antenas, mástiles, etc.) relacionados con la configuración específica del propio barco. El flujo objeto de investigación corresponde a la estela que se desarrolla sobre la cubierta de vuelo de una fragata, el cual está fuertemente influenciado por la superestructura de la misma, y que cualitativamente es similar al flujo que tiene lugar entre edificios altos o helipuertos situados en áreas urbanas, pues comprende estructuras tipo caja, con bordes afilados, que generan flujos tridimensionales altamente turbulentos. En esta Tesis se aborda el estudio del problema desde el punto de vista experimental, mediante simulación en túnel aerodinámico y medida de las variables del campo fluido sobre maquetas de fragatas a escala reducida. Las herramientas empleadas para tal cometido, han sido técnicas experimentales, tales como la visualización del flujo, la velocimetría láser por imágenes de partículas, la anemometría láser Doppler y los scanners electrónicos de presión, que han permitido investigar el flujo problema con objeto de obtener información, y adquirir así, un conocimiento más profundo de dicho flujo. La explotación de este conocimiento, ha dado lugar al diseño de una nueva solución, basada en la modificación de geometría básica de la fragata, por medio del cambio de la curvatura del techo del hangar, permitiendo suavizar el escalón descendente que se produce aguas abajo del mismo. Las geometrías modificadas han sido ensayada en túnel mediante la misma metodología empleada para la fragata original, de modo que, ha podido establecerse un análisis comparativo, para valorar la efectividad de la solución propuesta, el cual ha mostrado resultados satisfactorios, retirando el flujo adverso de la zona de operación de helicópteros y desplazándolo hacia el hangar, donde resulta menos peligroso, de modo que se reduce la carga del piloto y los riesgos de accidente durante las operaciones a bordo de embarcaciones. ABSTRACT The investigation of aerodynamic flow above the ship’s heliports is directly related to the aircraft safe operation, because the environment flow conditions may exceed the aircraft certification limits. Aerodynamic ship’s environment is highly complex and it is influenced by a large number of factors (stacks, antennae, masts, …) related to each specific ship configuration. The flow under investigation occurs into the wake produced above the flight deck of a frigate, that is strongly influenced by the superstructure. This flow is similar to one produced around tall buildings or heliports located in urban areas, thus in both of them, the air is flowing around sharp-edges box-like structures, producing three-dimensional and highly turbulent flows. This Thesis studies the problem from an experimental point of view, by means of wind tunnel simulations and measurements of the flow field around reduced scale frigates models. Tools used in this work are the experimental techniques, as flow visualization, particle image velocimetry, laser Doppler anemometry and pressure electronic scanners. These techniques provide information about the flow in order to obtain a more complete insight of this kind of flows. The exploitation of this insight is used for the design of a new flow control concept, based on the modification of the basic frigate geometry. This new design consists in the hangar roof curvature modification that produces a smoothing of the descendent step located downstream the hangar. Modified geometries are tested in wind tunnel by means of the same methodology as the original frigate, thus a comparative analysis is established in order to perform an assessment of effectiveness. This analysis has shown good results in displacing the adverse flow from the helicopter operation path to the nearest hangar region, reducing the pilot load and the accident risks during on board operations.

Diseño de una arquitectura escalable y de alta disponibilidad para un sistema middleware

El objetivo de este proyecto es el estudio de soluciones de escalabilidad y alta disponibilidad en sistemas distribuidos, así como su implantación en aquel de los sistemas analizados por Telefónica Digital, PopBox y Rush, que se consideré más adecuado. Actualmente, muchos servicios y aplicaciones están alojados directamente en laWeb, permitiendo abaratar el uso de ciertos servicios y mejorando la productividad y la competitividad de las empresas que los usan. Este crecimiento de las tecnologías en cloud experimentado en los últimos años plantea la necesidad de realizar sistemas que sean escalables, fiables y estén disponibles la mayor parte del tiempo posible. Un fallo en el servicio no afecta a una sola empresa, sino a todas las que están haciendo uso de dicho servicio. A lo largo de este proyecto se estudiarán las soluciones de alta disponibilidad y escalabilidad implementadas en varios sistemas distribuidos y se realizará una evaluación crítica de cada una de ellas. También se analizará la idoneidad de estas soluciones para los sistemas en los que posteriormente se aplicarán: PopBox y Rush. Se han diseñado diferentes soluciones para las plataformas implicadas, siguiendo varias aproximaciones y realizando un análisis exhaustivo de cada una de ellas, teniendo en cuenta el rendimiento y fiabilidad de cada aproximación. Una vez se ha determinado cuál es la estrategia más adecuada, se ha realizado una implementación fiable del sistema. Para cada uno de los módulos implementados se ha llevado a cabo una fase de testing unitario y de integración para asegurar el buen comportamiento del sistema y la integridad de éste cuando se realicen cambios. Específicamente, los objetivos que se alcanzarán son los siguientes: 1. Análisis exhaustivo de los sistemas de escalabilidad y alta escalabilidad que existen actualmente. 2. Diseño de una solución general HA1 y escalable teniendo en cuenta el objetivo anterior. 3. Análisis de la idoneidad de los sistemas PopBox y Rush para el diseño de un entorno distribuido escalable. 4. Diseño e implantación de una solución ad-hoc en el sistema elegido. ---ABSTRACT---The aim of this project is the study of solutions in scalability and high availability in distributed systems, and also its implementation in one of the systems developed y Telefónica I+D, PopBox and Rush, deemed more suitable. Nowadays, a lot of services and applications are stored directly in the Web, allowing companies to reduce the costs of using certain services and improving the productivity and competitiveness of those who use these services. This increase of the use of cloud tecnologies experimented in the last few years has led to the need of developing high available, scalable, and reliable systems. A failure in the service does not affect a single company but all the companies using this service. Throughout this project, I will study several solutions in High Availability and Scalability developed in some distributed systems and I will make a critic analysis of each one. Also I will analize the suitability of these solutions in the systems in which they will be applied: PopBox and Rush. I have designed different solutions for the platforms involved, following several approaches and making an exhaustive analysis of each one, taking into account their performance and reliability of each approach. Once I had determined which is the best strategy, I have developed a reliable implementation of the system. For each module implemented, I have carried out a set of unitary and integration tests to ensure the good behaviour of the system and the integrity of it when it changes. Specifically, the objectives to be achieved are as follows: 1. Exhaustive analysis of the systems in scalability and high availability that currently exist. 2. Design of a general solution taking into account the previous point. 3. Analysis of the suitability of the sistems PopBox and Rush for the design of a scalable distributed system. 4. Design and implementation of an ad-hoc solution in the chosen system.

COST Action Urban Agriculture Europe Training School «Urban agriculture inside the city:alternatives for vacant lots and public space»

The third Training School of the Action took place in Vitoria-Gasteiz (Basque country, Spain) from 24th to 26th September 2014. Vitoria-Gateiz has experimented an important urban outgrowth in the last decade, mainly through the planning and development of two new neighborhoods, Zabalgana and Salburúa, situated at the eastern and western border of the city, by the Greenbelt. These new development are well-equipped and designed according to sustainability principles. Nevertheless, among the main problems they present is their over-dimensioned public space, which creates some areas lacking enough density and mix of uses. On the other hand it is very expensive for the municipality to maintain these public space with the high Vitorian urban standards for public space. The proposed solution for this problem is a strategy of "re-densification" through the insertion of new uses The debate has arisen about which are the most adequate uses to insert in order to get an increasing of urban vitality, specially considering that housing has reached its peak and that Vitoria-Gasteiz is well served with social and sport amenities. The main goal of the TS was to offer an opportunity for the reflection about how urban agriculture might be an optimal alternative for the re-qualifying of this over-dimensioned public space in the new neighbourhoods, especially considering it synergic potential as a tool for production, leisure and landscaping, including the possibility of energy crops within the limits of urban space. Continuity with rural and natural surrounding area through alternatives for urban fringe at the small scale is a relevant issue to be considered as well within the reflection. Taking Zabalgana neighbourhood as a practical field for experiment, the Training School is conceived as a practical and intensive design charrette to be held during a whole day after two days of local knowledge-deepening through field visits and presentations.

Technical evolution of 3d modular construction from the nineteenth century to world war II

3D Modular construction is poorly known and scarcely published in technical literature. In spite of that there are an increasing number of manufacturers offering their products in different countries. This method has largely evolved from early examples such as the American Gold Rush prefabrication in the nineteenth century, the Sears precut homes or Voisin´s prototypes for modular homes, to the end of the first half of the twentieth century. In this period a non negligible number of attempts in 3D modular construction have been carried out, ranging from theoretical proposals to several hundred or thousand units produced. Selected examples of modular architecture will be analyses in order to illustrate its technical evolution, concerning materials, structure, transportation and on site assembly. Success and failure factors of the different systems will be discussed. Conclusions about building criteria shown in them and their applicability in current architecture will be drawn.

An interactive web-based learning assistant for structural analysis of continuous beams

There are significant levels of concern about the relevance and the difficulty of learning some issues on Strength of Materials and Structural Analysis. Most students of Continuum Mechanics and Structural Analysis in Civil Engineering usually point out some key learning aspects as especially difficult for acquiring specific skills. These key concepts entail comprehension difficulties but ease access and applicability to structural analysis in more advanced subjects. Likewise, some elusive but basic structural concepts, such as flexibility, stiffness or influence lines, are paramount for developing further skills required for advanced structural design: tall buildings, arch-type structures as well as bridges. As new curricular itineraries are currently being implemented, it appears appropriate to devise a repository of interactive web-based applications for training in those basic concepts. That will hopefully train the student to understand the complexity of such concepts, to develop intuitive knowledge on actual structural response and to improve their preparation for exams. In this work, a web-based learning assistant system for influence lines on continuous beams is presented. It consists of a collection of interactive user-friendly applications accessible via Web. It is performed in both Spanish and English languages. Rather than a “black box” system, the procedure involves open interaction with the student, who can simulate and virtually envisage the structural response. Thus, the student is enabled to set the geometric, topologic and mechanic layout of a continuous beam and to change or shift the loading and the support conditions. Simultaneously, the changes in the beam response prompt on the screen, so that the effects of the several issues involved in structural analysis become apparent. The system is performed through a set of web pages which encompasses interactive exercises and problems, written in JavaScript under JQuery and DyGraphs frameworks, given that their efficiency and graphic capabilities are renowned. Students can freely boost their self-study on this subject in order to face their exams more confidently. Besides, this collection is expected to be added to the "Virtual Lab of Continuum Mechanics" of the UPM, launched in 2013 (http://serviciosgate.upm.es/laboratoriosvirtuales/laboratorios/medios-continuos-en-construcci%C3%B3n)

Lateral Dynamic Models for High-Speed Railway Bridges and Vehicles

The analysis of the running safety of railway vehicles on viaducts subject to strong lateral actions such as cross winds requires coupled nonlinear vehicle-bridge interaction models, capable to study extreme events. In this paper original models developed by the authors are described, based on finite elements for the structure, multibody and finite element models for the vehicle, and specially developed interaction elements for the interface between wheel and rail. The models have been implemented within ABAQUS and have full nonlinear capabilities for the structure, the vehicle and the contact interface. An application is developed for the Ulla Viaduct, a 105 m tall arch in the Spanish high-speed railway network. The dynamic analyses allow obtaining critical wind curves, which define the running safety conditions for a given train in terms of speed of circulation and wind speed

Extending the expressiveness of fuzzy logic languages

En el trabajo que aquí presentamos se incluye la base teórica (sintaxis y semántica) y una implementación de un framework para codificar el razonamiento de la representación difusa o borrosa del mundo (tal y como nosotros, seres humanos, entendemos éste). El interés en la realización de éste trabajo parte de dos fuentes: eliminar la complejidad existente cuando se realiza una implementación con un lenguaje de programación de los llamados de propósito general y proporcionar una herramienta lo suficientemente inteligente para dar respuestas de forma constructiva a consultas difusas o borrosas. El framework, RFuzzy, permite codificar reglas y consultas en una sintaxis muy cercana al lenguaje natural usado por los seres humanos para expresar sus pensamientos, pero es bastante más que eso. Permite representar conceptos muy interesantes, como fuzzificaciones (funciones usadas para convertir conceptos no difusos en difusos), valores por defecto (que se usan para devolver resultados un poco menos válidos que los que devolveríamos si tuviésemos la información necesaria para calcular los más válidos), similaridad entre atributos (característica que utilizamos para buscar aquellos individuos en la base de datos con una característica similar a la buscada), sinónimos o antónimos y, además, nos permite extender el numero de conectivas y modificadores (incluyendo modificadores de negación) que podemos usar en las reglas y consultas. La personalización de la definición de conceptos difusos (muy útil para lidiar con el carácter subjetivo de los conceptos borrosos, donde nos encontramos con que cualificar a alguien de “alto” depende de la altura de la persona que cualifica) es otra de las facilidades incluida. Además, RFuzzy implementa la semántica multi-adjunta. El interés en esta reside en que introduce la posibilidad de obtener la credibilidad de una regla a partir de un conjunto de datos y una regla dada y no solo el grado de satisfacción de una regla a partir de el universo modelado en nuestro programa. De esa forma podemos obtener automáticamente la credibilidad de una regla para una determinada situación. Aún cuando la contribución teórica de la tesis es interesante en si misma, especialmente la inclusión del modificador de negacion, sus multiples usos practicos lo son también. Entre los diferentes usos que se han dado al framework destacamos el reconocimiento de emociones, el control de robots, el control granular en computacion paralela/distribuída y las busquedas difusas o borrosas en bases de datos. ABSTRACT In this work we provide a theoretical basis (syntax and semantics) and a practical implementation of a framework for encoding the reasoning and the fuzzy representation of the world (as human beings understand it). The interest for this work comes from two sources: removing the existing complexity when doing it with a general purpose programming language (one developed without focusing in providing special constructions for representing fuzzy information) and providing a tool intelligent enough to answer, in a constructive way, expressive queries over conventional data. The framework, RFuzzy, allows to encode rules and queries in a syntax very close to the natural language used by human beings to express their thoughts, but it is more than that. It allows to encode very interesting concepts, as fuzzifications (functions to easily fuzzify crisp concepts), default values (used for providing results less adequate but still valid when the information needed to provide results is missing), similarity between attributes (used to search for individuals with a characteristic similar to the one we are looking for), synonyms or antonyms and it allows to extend the number of connectives and modifiers (even negation) we can use in the rules. The personalization of the definition of fuzzy concepts (very useful for dealing with the subjective character of fuzziness, in which a concept like tall depends on the height of the person performing the query) is another of the facilities included. Besides, RFuzzy implements the multi-adjoint semantics. The interest in them is that in addition to obtaining the grade of satisfaction of a consequent from a rule, its credibility and the grade of satisfaction of the antecedents we can determine from a set of data how much credibility we must assign to a rule to model the behaviour of the set of data. So, we can determine automatically the credibility of a rule for a particular situation. Although the theoretical contribution is interesting by itself, specially the inclusion of the negation modifier, the practical usage of it is equally important. Between the different uses given to the framework we highlight emotion recognition, robocup control, granularity control in parallel/distributed computing and flexible searches in databases.