On the Statistical Distribution of Object-Oriented System Properties

The statistical distributions of different software properties have been thoroughly studied in the past, including software size, complexity and the number of defects. In the case of object-oriented systems, these distributions have been found to obey a power law, a common statistical distribution also found in many other fields. However, we have found that for some statistical properties, the behavior does not entirely follow a power law, but a mixture between a lognormal and a power law distribution. Our study is based on the Qualitas Corpus, a large compendium of diverse Java-based software projects. We have measured the Chidamber and Kemerer metrics suite for every file of every Java project in the corpus. Our results show that the range of high values for the different metrics follows a power law distribution, whereas the rest of the range follows a lognormal distribution. This is a pattern typical of so-called double Pareto distributions, also found in empirical studies for other software properties.

TALISMAN+: Intelligent System for Follow-Up and Promotion of Personal Autonomy

The TALISMAN+ project, financed by the Spanish Ministry of Science and Innovation, aims to research and demonstrate innovative solutions transferable to society which offer services and products based on information and communication technologies in order to promote personal autonomy in prevention and monitoring scenarios. It will solve critical interoperability problems among systems and emerging technologies in a context where heterogeneity brings about accessibility barriers not yet overcome and demanded by the scientific, technological or social-health settings.

A Mobile Feedback System for Integrated E-health Platforms to improve Self-Care and Compliance of Diabetes Mellitus Patients

Exploiting the full potential of telemedical systems means using platform based solutions: data are recovered from biomedical sensors, hospital information systems, care-givers, as well as patients themselves, and are processed and redistributed in an either centralized or, more probably, decentralized way. The integration of all these different devices, and interfaces, as well as the automated analysis and representation of all the pieces of information are current key challenges in telemedicine. Mobile phone technology has just begun to offer great opportunities of using this diverse information for guiding, warning, and educating patients, thus increasing their autonomy and adherence to their prescriptions. However, most of these existing mobile solutions are not based on platform systems and therefore represent limited, isolated applications. This article depicts how telemedical systems, based on integrated health data platforms, can maximize prescription adherence in chronic patients through mobile feedback. The application described here has been developed in an EU-funded R&D project called METABO, dedicated to patients with type 1 or type 2 Diabetes Mellitus

The ciao module system: A new module system for prolog

Ciao Prolog incorporates a module system which allows sepárate compilation and sensible creation of standalone executables. We describe some of the main aspects of the Ciao modular compiler, ciaoc, which takes advantage of the characteristics of the Ciao Prolog module system to automatically perform sepárate and incremental compilation and efficiently build small, standalone executables with competitive run-time performance, ciaoc can also detect statically a larger number of programming errors. We also present a generic code processing library for handling modular programs, which provides an important part of the functionality of ciaoc. This library allows the development of program analysis and transformation tools in a way that is to some extent orthogonal to the details of module system design, and has been used in the implementation of ciaoc and other Ciao system tools. We also describe the different types of executables which can be generated by the Ciao compiler, which offer different tradeoffs between executable size, startup time, and portability, depending, among other factors, on the linking regime used (static, dynamic, lazy, etc.). Finally, we provide experimental data which illustrate these tradeoffs.

Evaluación y análisis de la trazabilidad metrológica en redes para la verificación y calibración de instrumental GNSS (Global Navigation Satellite System)

Los estudios realizados hasta el momento para la determinación de la calidad de medida del instrumental geodésico han estado dirigidos, fundamentalmente, a las medidas angulares y de distancias. Sin embargo, en los últimos años se ha impuesto la tendencia generalizada de utilizar equipos GNSS (Global Navigation Satellite System) en el campo de las aplicaciones geomáticas sin que se haya establecido una metodología que permita obtener la corrección de calibración y su incertidumbre para estos equipos. La finalidad de esta Tesis es establecer los requisitos que debe satisfacer una red para ser considerada Red Patrón con trazabilidad metrológica, así como la metodología para la verificación y calibración de instrumental GNSS en redes patrón. Para ello, se ha diseñado y elaborado un procedimiento técnico de calibración de equipos GNSS en el que se han definido las contribuciones a la incertidumbre de medida. El procedimiento, que se ha aplicado en diferentes redes para distintos equipos, ha permitido obtener la incertidumbre expandida de dichos equipos siguiendo las recomendaciones de la Guide to the Expression of Uncertainty in Measurement del Joint Committee for Guides in Metrology. Asimismo, se han determinado mediante técnicas de observación por satélite las coordenadas tridimensionales de las bases que conforman las redes consideradas en la investigación, y se han desarrollado simulaciones en función de diversos valores de las desviaciones típicas experimentales de los puntos fijos que se han utilizado en el ajuste mínimo cuadrático de los vectores o líneas base. Los resultados obtenidos han puesto de manifiesto la importancia que tiene el conocimiento de las desviaciones típicas experimentales en el cálculo de incertidumbres de las coordenadas tridimensionales de las bases. Basándose en estudios y observaciones de gran calidad técnica, llevados a cabo en estas redes con anterioridad, se ha realizado un exhaustivo análisis que ha permitido determinar las condiciones que debe satisfacer una red patrón. Además, se han diseñado procedimientos técnicos de calibración que permiten calcular la incertidumbre expandida de medida de los instrumentos geodésicos que proporcionan ángulos y distancias obtenidas por métodos electromagnéticos, ya que dichos instrumentos son los que van a permitir la diseminación de la trazabilidad metrológica a las redes patrón para la verificación y calibración de los equipos GNSS. De este modo, ha sido posible la determinación de las correcciones de calibración local de equipos GNSS de alta exactitud en las redes patrón. En esta Tesis se ha obtenido la incertidumbre de la corrección de calibración mediante dos metodologías diferentes; en la primera se ha aplicado la propagación de incertidumbres, mientras que en la segunda se ha aplicado el método de Monte Carlo de simulación de variables aleatorias. El análisis de los resultados obtenidos confirma la validez de ambas metodologías para la determinación de la incertidumbre de calibración de instrumental GNSS. ABSTRACT The studies carried out so far for the determination of the quality of measurement of geodetic instruments have been aimed, primarily, to measure angles and distances. However, in recent years it has been accepted to use GNSS (Global Navigation Satellite System) equipment in the field of Geomatic applications, for data capture, without establishing a methodology that allows obtaining the calibration correction and its uncertainty. The purpose of this Thesis is to establish the requirements that a network must meet to be considered a StandardNetwork with metrological traceability, as well as the methodology for the verification and calibration of GNSS instrumental in those standard networks. To do this, a technical calibration procedure has been designed, developed and defined for GNSS equipment determining the contributions to the uncertainty of measurement. The procedure, which has been applied in different networks for different equipment, has alloweddetermining the expanded uncertainty of such equipment following the recommendations of the Guide to the Expression of Uncertainty in Measurement of the Joint Committee for Guides in Metrology. In addition, the three-dimensional coordinates of the bases which constitute the networks considered in the investigationhave been determined by satellite-based techniques. There have been several developed simulations based on different values of experimental standard deviations of the fixed points that have been used in the least squares vectors or base lines calculations. The results have shown the importance that the knowledge of experimental standard deviations has in the calculation of uncertainties of the three-dimensional coordinates of the bases. Based on high technical quality studies and observations carried out in these networks previously, it has been possible to make an exhaustive analysis that has allowed determining the requirements that a standard network must meet. In addition, technical calibration procedures have been developed to allow the uncertainty estimation of measurement carried outby geodetic instruments that provide angles and distances obtained by electromagnetic methods. These instruments provide the metrological traceability to standard networks used for verification and calibration of GNSS equipment. As a result, it has been possible the estimation of local calibration corrections for high accuracy GNSS equipment in standardnetworks. In this Thesis, the uncertainty of calibration correction has been calculated using two different methodologies: the first one by applying the law of propagation of uncertainty, while the second has applied the propagation of distributions using the Monte Carlo method. The analysis of the obtained results confirms the validity of both methodologies for estimating the calibration uncertainty of GNSS equipment.

Community Structurein Soil Porous System.

Soil is well recognized as a highly complex system. The interaction and coupled physical, chemical, and biological processes and phenomena occurring in the soil environment at different spatial and temporal scales are the main reasons for such complexity. There is a need for appropriate methodologies to characterize soil porous systems with an interdisciplinary character. Four different real soil samples, presenting different textures, have been modeled as heterogeneous complex networks, applying a model known as the heterogeneous preferential attachment. An analytical study of the degree distributions in the soil model shows a multiscaling behavior in the connectivity degrees, leaving an empirically testable signature of heterogeneity in the topology of soil pore networks. We also show that the power-law scaling in the degree distribution is a robust trait of the soil model. Last, the detection of spatial pore communities, as densely connected groups with only sparser connections between them, has been studied for the first time in these soil networks. Our results show that the presence of these communities depends on the parameter values used to construct the network. These findings could contribute to understanding the mechanisms of the diffusion phenomena in soils, such as gas and water diffusion, development and dynamics of microorganisms, among others.

Decarbonization of toll plazas: impact assessment of toll collection system management

Transport climate change impacts have become a worldwide concern. The use of Intelligent Transport Systems (ITS) could contribute to a more effective use of resources in toll road networks. Management of toll plazas is central to the reduction of greenhouse gas (GHG) emissions, as it is there that bottlenecks and congestion occur. This study focuses on management strategies aimed at reducing climate change impacts of toll plazas by managing toll collection systems. These strategies are based on the use of different collection system technologies – Electronic Toll Collection (ETC) and Open Road Tolling (ORT) – and on queue management. The carbon footprint of various toll plazas is determined by a proposed integrated methodology which estimates the carbon dioxide (CO2) emissions of the different operational stages at toll plazas (deceleration, service time, acceleration, and queuing) for the different toll collection systems. To validate the methodology, two main-line toll plazas of a Spanish toll highway were evaluated. The findings reveal that the application of new technologies to toll collection systems is an effective management strategy from an environmental point of view. The case studies revealed that ORT systems lead to savings of up to 70% of CO2 emissions at toll plazas, while ETC systems save 20% comparing to the manual ones. Furthermore, queue management can offer a 16% emissions savings when queue time is reduced by 116 seconds. The integrated methodology provides an efficient environmental management tool for toll plazas. The use of new technologies is the future of the decarbonization of toll plazas.

Analysis of a thermal system through remote laboratories

This paper describes the experiences using remote laboratories for thorough analysis of a thermal system, including disturbances. Remote laboratories for education in subjects of control, is a common resorted method, used by universities. This method is applied to offer a flexible service in schedules so as to obtain greater and better results of available resources. Remote laboratories have been used for controlling physical devices remotely. Furthermore, remote labs have been used for transfer function identification of real equipment. Nevertheless, remote analyses of disturbances have not been done. The aim of this contribution is thereby to apply the experience of remote laboratories in the study of disturbances. Some experiments are carried out to demonstrate the effectiveness in using remote laboratories for complete analysis of a thermal system. Considering the remote access to thermal system, “Sistema de Laboratorios a Distancia” (SLD) was used.

System supporting public transport based on geolocation

El propósito de este proyecto de fin de Grado es el estudio y desarrollo de una aplicación basada en Android que proporcionará soporte y atención a los servicios de transporte público existentes en Cracovia, Polonia. La principal funcionalidad del sistema será consultar la posición de un determinado autobús o tranvía y mostrar su ubicación con exactitud. Para lograr esto, necesitaremos tres fases de desarrollo. En primer lugar, deberemos implementar un sistema que obtenga las coordenadas geográficas de los vehículos de transporte público en cada instante. A continuación, tendremos que registrar todos estos datos y almacenarlos en una base de datos en un servidor web. Por último, desarrollaremos un sistema cliente que realice consultas a tiempo real sobre estos datos almacenados, obteniendo la posición para una línea determinada y mostrando su ubicación con un marcador en el mapa. Para hacer el seguimiento de los vehículos, sería necesario tener acceso a una API pública que nos proporcionase la posición registrada por los GPS que integran cada uno de ellos. Como esta API no existe actualmente para los servicios de autobús, y para los tranvías es de uso meramente privado, desarrollaremos una segunda aplicación en Android que hará las funciones del lado servidor. En ella podremos elegir mediante una simple interfaz el número de línea y un código específico que identificará a cada vehículo en particular (e.g. podemos tener 6 tranvías recorriendo la red al mismo tiempo para la línea 24). Esta aplicación obtendrá las coordenadas geográficas del teléfono móvil, lo cual incluye latitud, longitud y orientación a través del proveedor GPS. De este modo, podremos realizar una simulación de como el sistema funcionará a tiempo real utilizando la aplicación servidora desde dentro de un tranvía o autobús y, al mismo tiempo, utilizando la aplicación cliente haciendo peticiones para mostrar la información de dicho tranvía. El cliente, además, podrá consultar la ruta de cualquier línea sin necesidad de tener acceso a Internet. Almacenaremos las rutas y paradas de cada línea en la memoria del teléfono móvil utilizando ficheros XML debido al poco espacio que ocupan y a lo útil que resulta poder consultar un trayecto en cualquier momento, independientemente del acceso a la red. El usuario también podrá consultar las tablas de horarios oficiales para cada línea. Aunque en este caso si será necesaria una conexión a Internet debido a que se realizará a través de la web oficial de MPK. Para almacenar todas las coordenadas de cada vehículo en cada instante necesitaremos crear una base de datos en un servidor. Esto se resolverá mediante el uso de MYSQL y PHP. Se enviarán peticiones de tipo GET y POST a los servicios PHP que se encargarán de traducir y realizar la consulta correspondiente a la base de datos MYSQL. Por último, gracias a todos los datos recogidos relativos a la posición de los vehículos de transporte público, podremos realizar algunas tareas de análisis. Comparando la hora exacta a la que los vehículos pasaron por cada parada y la hora a la que deberían haber pasado según los horarios oficiales, podremos descubrir fallos en estos. Seremos capaces de determinar si es un error puntual debido a factores externos (atascos, averías,…) o si por el contrario, es algo que ocurre muy a menudo y se debería corregir el horario oficial. ABSTRACT The aim of this final Project (for University) is to develop an Android application thatwill provide support and feedback to the public transport services in Krakow. The main functionality of the system will be to track the position of a desired bus or tram line, and display its position on the map. To achieve this, we will need 3 stages: the first one will be to implement a system that sends the geographical position of the public transport vehicles, the second one will be to collect this data in a web server, and the last one will be to get the last location registered for the desired line and display it on the map. For tracking the vehicles, we would need to have access to a public API that should be connected with each bus/tram GPS. As this doesn’t exist in Krakow or at least is not available for public use, we will develop a second android application that will do the server side job. We will be able to choose in a simple interface the line number and a code letter to identify each vehicle (e.g. we can have 6 trams that belong to the line number 24 working at the same time). It will take the current mobile geolocation; this includes getting latitude, longitude and bearing from the GPS provider. Thus, we will be able to make a simulation of how the system works in real time by using the server app inside a tram and at the same time, using the client app and making requests to display the information of that tram. The client will also be able to check the path of the desired line without internet access. We will store the path and stops for each line locally in the phone memory using xml files due to the few requirements of available space it needs and the usefulness of checking a path when needed. This app will also offer the functionality of checking the timetable for the line, but in this case, it will link to the official Mpk website, so Internet access will be required. For storing all the coordinates for each vehicle at every moment we will need to create a database on a server. We have decided that the easiest way is to use Mysql and PHP for the deployment of the service. We will send GET and POST requests to the php files and those files will make the according queries to our database. Finally, based on all the collected data, we will be able to get some information about errors in the system of public transport timetables. We will check at what time a line was in each specific stop and compare it with the official timetable to find mistakes of time. We will determine if it is something that happens occasionally and related to external factors (e.g. traffic jams, breakdowns…) or if on the other hand, it is something that happens very often and the public transport timetables should be looked over and corrected.

Distributed Web Interface for Real-Time Spatial Audio Reproduction System

SSR es el acrónimo de SoundScape Renderer (tool for real-time spatial audio reproduction providing a variety of rendering algorithms), es un programa escrito en su mayoría en C++. El programa permite al usuario escuchar tanto sonidos grabados con anterioridad como sonidos en directo. El sonido o los sonidos se oirán, desde el punto de vista del oyente, como si el sonido se produjese en el punto que el programa decida, lo interesante de este proyecto es que el sonido podrá cambiar de lugar, moverse, etc. Todo en tiempo real. Esto se consigue sin modificar el sonido al grabarlo pero sí al emitirlo, el programa calcula las variaciones necesarias para que al emitir el sonido al oyente le llegue como si el sonido realmente se generase en un punto del espacio o lo más parecido posible. La sensación de movimiento no deja de ser el punto anterior cambiando de lugar. La idea era crear una aplicación web basada en Canvas de HTML5 que se comunicará con esta interfaz de usuario remota. Así se solucionarían todos los problemas de compatibilidad ya que cualquier dispositivo con posibilidad de visualizar páginas web podría correr una aplicación basada en estándares web, por ejemplo un sistema con Windows o un móvil con navegador. El protocolo debía de ser WebSocket porque es un protocolo HTML5 y ofrece las “garantías” de latencia que una aplicación con necesidades de información en tiempo real requiere. Nos permite una comunicación full-dúplex asíncrona sin mucho payload que es justo lo que se venía a evitar al no usar polling normal de HTML. El problema que surgió fue que la interfaz de usuario de red que tenía el programa no era compatible con WebSocket debido a un handshacking inicial y obligatorio que realiza el protocolo, por lo que se necesitaba otra interfaz de red. Se decidió entonces cambiar a JSON como formato para el intercambio de mensajes. Al final el proyecto comprende no sólo la aplicación web basada en Canvas sino también un servidor funcional y la definición de una nueva interfaz de usuario de red con su protocolo añadido. ABSTRACT. This project aims to become a part of the SSR tool to extend its capabilities in the field of the access. SSR is an acronym for SoundScape Renderer, is a program mostly written in C++ that allows you to hear already recorded or live sound with a variety of sound equipment as if the sound came from a desired place in the space. Like the web-page of the SSR says surely better explained: “The SoundScape Renderer (SSR) is a tool for real-time spatial audio reproduction providing a variety of rendering algorithms.” The application can be used with a graphical interface written in Qt but has also a network interface for external applications to use it. This network interface communicates using XML messages. A good example of it is the Android client. This Android client is already working. In order to use the application should be run it by loading an audio source and the wanted environment so that the renderer knows what to do. In that moment the server binds and anyone can use the network interface. Since the network interface is documented everyone can make an application to interact with this network interface. So the application can have as many user interfaces as wanted. The part that is developed in this project has nothing to do neither with audio rendering nor even with the reproduction of the spatial audio. The part that is developed here is about the interface used in the SSR application. As it can be deduced from the title: “Distributed Web Interface for Real-Time Spatial Audio Reproduction System”, this work aims only to offer the interface via web for the SSR (“Real-Time Spatial Audio Reproduction System”). The idea is not to make a new graphical interface for SSR but to allow more types of interfaces and communication. To accomplish the objective of allowing more graphical interfaces this project is going to use a new network interface. By now the SSR application is using only XML for data interchange but this new network interface support JSON. This project comprehends the server that launch the application, the user interface and the new network interface. It is done with these modules in order to allow creating new user interfaces that can communicate with the server or new servers that can communicate with the user interface by defining a complete network interface for data interchange.

Unattended motion detection system based on the mammalian retina

Sensing systems in living bodies offer a large variety of possible different configurations and philosophies able to be emulated in artificial sensing systems. Motion detection is one of the areas where different animals adopt different solutions and, in most of the cases, these solutions reflect a very sophisticated form. One of them, the mammalian visual system, presents several advantages with respect to the artificial ones. The main objective of this paper is to present a system, based on this biological structure, able to detect motion, its sense and its characteristics. The configuration adopted responds to the internal structure of the mammalian retina, where just five types of cells arranged in five layers are able to differentiate a large number of characteristics of the image impinging onto it. Its main advantage is that the detection of these properties is based purely on its hardware. A simple unit, based in a previous optical logic cell employed in optical computing, is the basis for emulating the different behaviors of the biological neurons. No software is present and, in this way, no possible interference from outside affects to the final behavior. This type of structure is able to work, once the internal configuration is implemented, without any further attention. Different possibilities are present in the architecture to be presented: detection of motion, of its direction and intensity. Moreover, some other characteristics, as symmetry may be obtained.

Influencia de un nuevo marco jurídico en la competitividad del sistema portuario español

El sistema portuario español movió en el año 2013 aproximadamente 458,54 millones de toneladas, 13,8 millones de TEUs, con un total de 131.128 buques que accedieron a puerto para el conjunto de las 28 Autoridades Portuarias. Con el 62% de las exportaciones y el 86% de las importaciones realizadas por vía marítima, una rentabilidad del 2,34 %, muy cerca del objetivo del 2,5 % de rentabilidad media annual establecida legalmente, y una cifra de negocios aproximada de 1.028 millones de euros equivalentes al 1,1 % del PIB que genera un empleo directo e indirecto vinculado de 145.000 personas, concluimos que estamos hablando de un sector estratégico para la economía del país. Desde hace décadas, en muchos puertos del mundo se han venido desarrollando terminales “hub” o de concentración y distribución de cargas. Las navieras concentran entre este tipo de terminales sus líneas transoceánicas con buques de enormes dimensiones y capacidad de carga para producir los tránsitos de contenedores desde estas líneas a otras líneas llamadas “feeder”, con buques de menor tamaño que enlazan el “hub” con los puertos de su área marítima de influencia. La excepcional ubicación geoestratégica de España, con aproximadamente ocho mil kilómetros de costa, ha originado que los puertos españoles de mayor dimensión aspiren a incorporarse a esta red marítima internacional de contenedores y determina que en nuestro sistema portuario los movimientos de contenedores de tránsito tengan gran importancia. Sin embargo, la crisis económica ha tenido un efecto decisivo en el sector marítimo, determinando una lucha feroz entre todos los puertos, nacionales e internacionales, por captar este tipo de tráficos, lo que origina una búsqueda de las compañías navieras de puertos cada vez más eficientes en términos calidad/coste del servicio. La entrada en vigor del Texto Refundido de la Ley de Puertos y la piedra angular de su reforma, la Ley 33/2010, plantea como objetivo principal la mejora de la competitividad del sistema portuario español y liderar su recuperación, ofreciendo unas condiciones de entorno favorables a los puertos españoles que acaben por incentivar la captación de tráficos e inversión privada a través de una oferta de servicios e infraestructura de calidad y a precios competitivos que consoliden su posición dentro del tráfico marítimo mundial. Surge, por tanto, la conveniencia de investigar la influencia de las medidas propuestas por dicha norma legal y las soluciones ofrecidas a las demandas de un sector considerado estratégico para la economía del país, y cuya resolución se considera imprescindible para consolidar su recuperación. Por eso, se han analizado los aspectos más importantes de la reforma mediante la realización de un resumen ejecutivo y se ha estudiado la influencia de las medidas que incorpora desde el punto de vista de tres factores, que previamente se han considerado como fundamentales para la recuperación del sistema portuario español, y que históricamente habían sido demandados por el mismo, como son, en primer lugar, un progresivo sistema de flexibilización tributaria que permitiera a los puertos españoles ganar en términos de competitividad respecto a otros modelos portuarios mucho más flexibles en materia tarifaria, en segundo lugar, una necesaria liberalización del régimen de prestación de los servicios portuarios que posibilite el libre acceso a cualquier interesado en su prestación y, en último lugar, el progresivo abaratamiento de los costes inherentes a dichos servicios, fundamentalmente la manipulación de mercancías. Con posterioridad se ha investigado el trámite parlamentario al que se ha sometido la ley, fruto del enorme consenso alcanzado entre las dos principales fuerzas políticas del país, que determinó que se presentaran más de 700 enmiendas al proyecto original, y en algunos casos, se ha prestado especial atención a determinadas enmiendas que se consideran, en opinión de este investigador, novedosas y aventuradas, razón por la cual quizás no fueron incorporadas definitivamente al texto legal. Y se han analizado las principales demandas y aportaciones extraídas de la Sesión Informativa sobre la tramitación del entonces proyecto de ley ofrecida por la Comisión de Fomento del Congreso de los Diputados a los principales representantes del sector, comunidad portuaria, universidad y sindicatos. Siendo conscientes de la incidencia que tiene el servicio portuario de manipulación de mercancías en el paso de la mercancía por el puerto, se ha hecho una referencia concreta al peculiar régimen jurídico y laboral del personal vinculado al servicio. Avanzamos que las características de la relación laboral especial, y su peculiar régimen jurídico, con una dualidad de relaciones laborales, tiene una influencia decisiva en la nómina del trabajador que se repercute en los usuarios del servicio, fundamentalmente el naviero y el operador de la terminal, que en definitiva, incide en la competitividad del puerto. Y se ha constatado el auge aperturista de numerosas legislaciones portuarias europeas, prestando especial atención al proyecto frustrado de liberalización de los servicios portuarios en la Unión Europea de la conocida como Directiva Loyola de Palacio del año 2003 y al Libro Blanco de Transportes del año 2011. Así como a las deficiencias advertidas por el Dictamen de la Comisión Europea de fecha 27/09/2012 en relación al régimen jurídico del servicio portuario de manipulación de mercancías, que lo considera disconforme y contrario con las normas de libertad de establecimiento en Europa y que amenaza con una previsible reforma unilateral de la legislación portuaria española, a instancias europeas. Bajo este planteamiento, se ha procedido a analizar el marco de prestación de dichos servicios desde el punto de vista de la propia comunidad portuaria. Inicialmente, a través de un estudio de fuerzas de la competitividad del sector de los servicios portuarios en el sistema portuario español que nos permitirá trazar un mapa estratégico del mismo a través del “Modelo de las Cinco Fuerzas de Porter” concluyendo, que el poder de los prestadores de servicios portuarios como proveedores de los mismos, fundamentalmente en la manipulación de mercancías, es máximo, con un único colectivo, los estibadores portuarios, que al amparo de la normativa legal vigente tienen la exclusividad de su prestación. Dichas circunstancias restan competitividad al sistema frente a alternativas portuarias más flexibles y desincentivan la inversión privada. Y, en segundo lugar, mediante un proceso participativo en distintas encuestas sobre el modelo legislativo y sobre el marco formativo del sector con los propios agentes afectados dentro de la comunidad portuaria, desde la triple perspectiva de la vertiente pública que representan las Autoridades Portuarias, como gestores de las infraestructuras, la vertiente privada que representan los usuarios y prestadores de servicios, como principal cliente del puerto y desde el punto de vista de la propia mano de obra portuaria materializada en la representación sindical de dichos trabajadores. Los resultados nos permitirán concluir, respectivamente, la incidencia del servicio portuario mercancía por el puerto, por representar más de la mitad de los costes. Así como la aspiración de los trabajadores adscritos a dicho servicio de consolidar un título formativo que unifique y potencie su capacitación profesional, circunstancia esta última, también demandada por toda comunidad portuaria. Analizadas las conclusiones extraídas en cada una de las líneas de investigación se han detectado una serie de ineficiencias dentro del mismo que dicho marco regulador no ha sabido resolver, por lo que se ha considerado la conveniencia de formular, como herramienta de ayuda a gestores del sistema portuario español, una relación de medidas que, en opinión de este investigador, se consideran necesarias para mejorar el régimen de prestación de los servicios portuarios y se ha propuesto un borrador de modificación del actual Texto Refundido que pueda servir de base para materializar una futura reforma legal. Las conclusiones obtenidas en la investigación deben sentar las bases de una profunda reflexión sobre la necesidad de encaminar, como alternativa a una previsible modificación a instancias europeas, una reforma legal que decididamente apueste por la competitividad del sistema portuario español desde el punto de vista de la liberalización de servicios, el abaratamiento de los costes de la estiba y la necesaria profesionalización de los trabajadores adscritos al servicio portuario de manipulación de mercancías. During 2013 the Spanish Port System moved nearly 458,54 million tons of freight, 13,8 million TEUs, involving a total of 131.128 ships for the 28 existing Port Authorities. With 62% of exports and 86% of imports made through sea transportation, a 2,34% profit, close to the 2,5% average annual profit goal legally established, revenues of 1.028 million € equivalent to a 1.1% of Spain’s GDP and a figure of 145.000 people a directly or indirectly employed we can conclude that maritime industry is undoubtedly one of the strategic and key sectors for the country’s economy. Since several decades many ports in the world have been increasingly developing “Hub” terminals, those which concentrate and distribute freight. Shipping companies place among these type of terminals their transoceanic sea liners along with huge dimension & capacity ships to make the container transit from these liners to other called “feeder” which are smaller freight ships that connect the “hub” with the ports within its maritime area of influence. Spain’s exceptional geostrategic location with over 8.000 km of coastline has originated that those big dimension Spanish ports aspire to become a part of a container international maritime network which also determines that transit container move is key within our port system. Nevertheless the economic crisis has had a decisive impact on the maritime sector originating a fierce battle between all ports, national and international ones, all of them fight against each other to catch this type of maritime traffic which triggers an ongoing shipping companies search in cost/service quality efficient ports. The cornerstone of the Restated Text of Port Law is Law 33/2010, which lays out as main goal the Spanish Port System competitiveness improvement and lead its recovery offering favorable environment conditions to Spanish ports which help encourage maritime traffic attraction and private investment through a wide offer of services, quality of infrastructure and competitive prices which can consolidate its positioning within the world’s maritime traffic. It is therefore key to investigate the influence of the measures proposed by the above mentioned law and also the solutions offered to the demands of a sector which is considered strategic for the country’s economy and which solution is essential to consolidate the recovery. It is because of this that the most important aspects of the reform have been analyzed through the making of an executive summary and it has also been studied the influence of the measures it includes from the point of view of three factors which have previously been considered as key for the Spanish port system recovery. The system has historically demanded a progressive tax flexibility, which would permit Spanish ports be more competitive compared to other port models much more flexible in rates, a necessary liberalization of the port service provision regime and last but not least, to cut the price of costs related to those services, mainly freight handling. Following this, the parliamentary process of the law has also been studied as a consequence of the vast consensus reached by the main political forces in the country which clearly determined that more than 700 amendments to the original project were presented. In some cases the focus has been on amendments which are adventurous and new, reason why they were finally not included to the final legal text. Being well aware of the importance that freight handling procedure has, I have made a specific reference to the legal and working framework of those employees related to this service. We conclude that the special working relationship, its different legal regime, along with the working relationship dualism has a big impact and decisive influence over the worker’s salary which also affects service users, mainly shipowners and terminal operators, having a bad effect on the port’s competitiveness. The above confirms the new opening trend of main European port laws with special attention to the frustrated European Union port services liberalization project, also known as Directive Loyola de Palacio (2003) and the White Paper on Transports (2011). It is important to highlight that the European Commission has also observed several deficiencies with regard to the freight handling port service Law Regime being in disagreement with it, considering it is against the free establishment rules in Europe. The Commission is likely to present a unilateral reform to the Spanish Port Law. Under this approach the service provision framework is being analyzed from the Port Community point of view. Initially the analysis will focus on the study of the competition forces within the port services industry in Spain, this will allow us to draw up an strategic map through “Porter’s Five Forces Model” concluding that the power of port services providers as freight handlers is maximum, with an only collective, stevedores, which has the exclusivity for their services. All these circumstances not only decrease the system’s competitiveness versus other more flexible but also restrain private investments. Secondly, through a participating procedure in different surveys about the legislative model and about the training framework with the affected agents within the port community, there is a triple perspective: Public point of view represented by Port Authorities as infrastructure managers, Private point of view represented by users and service suppliers as main Port’s customer and finally, port workforce, represented by union leaders. Results will let us conclude that freight handling service is the most critical port service and represents more than half of the costs. This service related workers aspire to obtain a training certificate that unifies and boosts their professional role which is also chased by the entire port community. Once conclusions have been analyzed for all research lines, several deficiencies have been found and the regulatory framework hasn’t yet been able to solve them, it has therefore been a series of necessary measures that help improve the port services provision regime. A new proposal to the Restated Law Text has been drafted as the first step to embrace a future legal reform. Conclusions obtained on the research should set the new basis of a deep reflection about the need to bent on a new legal reform which firmly bets on Spanish port system competitiveness from three key points of view, service liberalization, ship load cost reduction and professionalization of freight handling related workers.

Ontology-driven legal support-system in air transport passenger domain

This paper aims to present a preliminary version of asupport-system in the air transport passenger domain. This system relies upon an underlying on-tological structure representing a normative framework to facilitatethe provision of contextualized relevant legal information.This information includes the pas-senger's rights and itenhances self-litigation and the decision-making process of passengers.Our contribution is based in the attempt of rendering a user-centric-legal informationgroundedon case-scenarios of the most pronounced incidents related to the consumer complaints in the EU.A number ofadvantages with re-spect to the current state-of-the-art services are discussed and a case study illu-strates a possible technological application.

Magnetic Attitude Control System for a Small Satellite. Impact on the Thermal Performance

El principal objetivo de la tesis es estudiar el acoplamiento entre los subsistemas de control de actitud y de control térmico de un pequeño satélite, con el fin de buscar la solución a los problemas relacionados con la determinación de los parámetros de diseño. Se considera la evolución de la actitud y de las temperaturas del satélite bajo la influencia de dos estrategias de orientación diferentes: 1) estabilización magnética pasiva de la orientación (PMAS, passive magnetic attitude stabilization), y 2) control de actitud magnético activo (AMAC, active magnetic attitude control). En primer lugar se presenta el modelo matemático del problema, que incluye la dinámica rotacional y el modelo térmico. En el problema térmico se considera un satélite cúbico modelizado por medio de siete nodos (seis externos y uno interno) aplicando la ecuación del balance térmico. Una vez establecido el modelo matemático del problema, se estudia la evolución que corresponde a las dos estrategias mencionadas. La estrategia PMAS se ha seleccionado por su simplicidad, fiabilidad, bajo coste, ahorrando consumo de potencia, masa coste y complejidad, comparado con otras estrategias. Se ha considerado otra estrategia de control que consigue que el satélite gire a una velocidad requerida alrededor de un eje deseado de giro, pudiendo controlar su dirección en un sistema inercial de referencia, ya que frecuentemente el subsistema térmico establece requisitos de giro alrededor de un eje del satélite orientado en una dirección perpendicular a la radiación solar incidente. En relación con el problema térmico, para estudiar la influencia de la velocidad de giro en la evolución de las temperaturas en diversos puntos del satélite, se ha empleado un modelo térmico linealizado, obtenido a partir de la formulación no lineal aplicando un método de perturbaciones. El resultado del estudio muestra que el tiempo de estabilización de la temperatura y la influencia de las cargas periódicas externas disminuye cuando aumenta la velocidad de giro. Los cambios de temperatura se reducen hasta ser muy pequeños para velocidades de rotación altas. En relación con la estrategia PMAC se ha observado que a pesar de su uso extendido entre los micro y nano satélites todavía presenta problemas que resolver. Estos problemas están relacionados con el dimensionamiento de los parámetros del sistema y la predicción del funcionamiento en órbita. Los problemas aparecen debido a la dificultad en la determinación de las características magnéticas de los cuerpos ferromagnéticos (varillas de histéresis) que se utilizan como amortiguadores de oscilaciones en los satélites. Para estudiar este problema se presenta un modelo analítico que permite estimar la eficiencia del amortiguamiento, y que se ha aplicado al estudio del comportamiento en vuelo de varios satélites, y que se ha empleado para comparar los resultados del modelo con los obtenidos en vuelo, observándose que el modelo permite explicar satisfactoriamente el comportamiento registrado. ABSTRACT The main objective of this thesis is to study the coupling between the attitude control and thermal control subsystems of a small satellite, and address the solution to some existing issues concerning the determination of their parameters. Through the thesis the attitude and temperature evolution of the satellite is studied under the influence of two independent attitude stabilization and control strategies: (1) passive magnetic attitude stabilization (PMAS), and (2) active magnetic attitude control (AMAC). In this regard the mathematical model of the problem is explained and presented. The mathematical model includes both the rotational dynamics and the thermal model. The thermal model is derived for a cubic satellite by solving the heat balance equation for 6 external and 1 internal nodes. Once established the mathematical model of the problem, the above mentioned attitude strategies were applied to the system and the temperature evolution of the 7 nodes of the satellite was studied. The PMAS technique has been selected to be studied due to its prevalent use, simplicity, reliability, and cost, as this strategy significantly saves the overall power, weight, cost, and reduces the complexity of the system compared to other attitude control strategies. In addition to that, another control law that provides the satellite with a desired spin rate along a desired axis of the satellite, whose direction can be controlled with respect to the inertial reference frame is considered, as the thermal subsystem of a satellite usually demands a spin requirement around an axis of the satellite which is positioned perpendicular to the direction of the coming solar radiation. Concerning the thermal problem, to study the influence of spin rate on temperature evolution of the satellite a linear approach of the thermal model is used, which is based on perturbation theory applied to the nonlinear differential equations of the thermal model of a spacecraft moving in a closed orbit. The results of this study showed that the temperature stabilization time and the periodic influence of the external thermal loads decreases by increasing the spin rate. However, the changes become insignificant for higher values of spin rate. Concerning the PMAS strategy, it was observed that in spite of its extended application to micro and nano satellites, still there are some issues to be solved regarding this strategy. These issues are related to the sizing of its system parameters and predicting the in-orbit performance. The problems were found to be rooted in the difficulties that exist in determining the magnetic characteristics of the ferromagnetic bodies (hysteresis rods) that are applied as damping devices on-board satellites. To address these issues an analytic model for estimating their damping efficiency is proposed and applied to several existing satellites in order to compare the results with their respective in-flight data. This model can explain the behavior showed by these satellites.

Changes in the governance system for higher education in Peru to meet the challenges of the 21st century

The competition in markets, the distribution of limited resources based on productivity and performance, and the efficient management of universities are changing the criteria of trust and legitimacy of the educational system in Peru. Universities are perceived more as institutions of the public sector, while the services they offer must rather contribute to the modernization of the emerging society and the knowledge economy. Higher Educations reforms - initiated in the 1980s - have been inspired by the successful university organizations that have managed to change their governance and addressed to transform certain bureaucratic institutions into organizations capable of playing active role in this global competition for resources and best talent. Within this context, Peruvian universities are facing two major challenges: adapting themselves to new global perspectives and being able to develop a better response to society demands, needs and expectations. This article proposes a model of governance system for higher education in Peru that gives a comprehensive solution to these challenges, allowing dealing with the problems of universities for their development and inclusion within the global trends. For this purpose, a holistic and qualitative methodologic approach was developed, considering an integrated method which considered educational reality as a whole, understanding its facts, components and elements that affects its outcomes. It is proposed to define a policy for university education in Peru that permeates society, by changing the planning model from a social reform model to a policy analysis model, where the Peruvian State acts as sole responsible for responding to the demanding society as its legal representative complemented with some external and independent bodies that define the basis of best practice, as it is being done in many university models worldwide.