Digital image processing techniques as a tool for evaluating and mapping patinas on granite monuments

Monument conservation is related to the interaction between the original petrological parameters of the rock and external factors in the area where the building is sited, such as weather conditions, pollution, and so on. Depending on the environmental conditions and the characteristics of the materials used, different types of weathering predominate. In all, the appearance of surface crusts constitutes a first stage, whose origin can often be traced to the properties of the material itself. In the present study, different colours of “patinas” were distinguished by defining the threshold levels of greys associated with “pathology” in the histogram. These data were compared to background information and other parameters, such as mineralogical composition, porosity, and so on, as well as other visual signs of deterioration. The result is a map of the pathologies associated with “cover films” on monuments, which generate images by relating colour characteristics to desired properties or zones of interest.

Self-positioning and mapping of rectangular rooms with sectorized narrowband antennas

A system for simultaneous 2D estimation of rectangular room and transceiver localization is proposed. The system is based on two radio transceivers, both capable of full duplex operations (simultaneous transmission and reception). This property enables measurements of channel impulse response (CIR) at the same place the signal is transmitted (generated), commonly known as self-to-self CIR. Another novelty of the proposed system is the spatial CIR discrimination that is possible with the receiver antenna design which consists of eight sectorized antennas with 45° aperture in the horizontal plane and total coverage equal to the isotropic one. The dimensions of a rectangular room are reconstructed directly from spatial radio impulse responses by extracting the information regarding round trip time (RTT). Using radar approach estimation of walls and corners positions is derived. Tests using measured data were performed, and the simulation results confirm the feasibility of the approach.

Environmental variables modeling based on remote sensing data using time series analysis: forestry and agricultural applications

En la actualidad, el seguimiento de la dinámica de los procesos medio ambientales está considerado como un punto de gran interés en el campo medioambiental. La cobertura espacio temporal de los datos de teledetección proporciona información continua con una alta frecuencia temporal, permitiendo el análisis de la evolución de los ecosistemas desde diferentes escalas espacio-temporales. Aunque el valor de la teledetección ha sido ampliamente probado, en la actualidad solo existe un número reducido de metodologías que permiten su análisis de una forma cuantitativa. En la presente tesis se propone un esquema de trabajo para explotar las series temporales de datos de teledetección, basado en la combinación del análisis estadístico de series de tiempo y la fenometría. El objetivo principal es demostrar el uso de las series temporales de datos de teledetección para analizar la dinámica de variables medio ambientales de una forma cuantitativa. Los objetivos específicos son: (1) evaluar dichas variables medio ambientales y (2) desarrollar modelos empíricos para predecir su comportamiento futuro. Estos objetivos se materializan en cuatro aplicaciones cuyos objetivos específicos son: (1) evaluar y cartografiar estados fenológicos del cultivo del algodón mediante análisis espectral y fenometría, (2) evaluar y modelizar la estacionalidad de incendios forestales en dos regiones bioclimáticas mediante modelos dinámicos, (3) predecir el riesgo de incendios forestales a nivel pixel utilizando modelos dinámicos y (4) evaluar el funcionamiento de la vegetación en base a la autocorrelación temporal y la fenometría. Los resultados de esta tesis muestran la utilidad del ajuste de funciones para modelizar los índices espectrales AS1 y AS2. Los parámetros fenológicos derivados del ajuste de funciones permiten la identificación de distintos estados fenológicos del cultivo del algodón. El análisis espectral ha demostrado, de una forma cuantitativa, la presencia de un ciclo en el índice AS2 y de dos ciclos en el AS1 así como el comportamiento unimodal y bimodal de la estacionalidad de incendios en las regiones mediterránea y templada respectivamente. Modelos autorregresivos han sido utilizados para caracterizar la dinámica de la estacionalidad de incendios y para predecir de una forma muy precisa el riesgo de incendios forestales a nivel pixel. Ha sido demostrada la utilidad de la autocorrelación temporal para definir y caracterizar el funcionamiento de la vegetación a nivel pixel. Finalmente el concepto “Optical Functional Type” ha sido definido, donde se propone que los pixeles deberían ser considerados como unidades temporales y analizados en función de su dinámica temporal. ix SUMMARY A good understanding of land surface processes is considered as a key subject in environmental sciences. The spatial-temporal coverage of remote sensing data provides continuous observations with a high temporal frequency allowing the assessment of ecosystem evolution at different temporal and spatial scales. Although the value of remote sensing time series has been firmly proved, only few time series methods have been developed for analyzing this data in a quantitative and continuous manner. In the present dissertation a working framework to exploit Remote Sensing time series is proposed based on the combination of Time Series Analysis and phenometric approach. The main goal is to demonstrate the use of remote sensing time series to analyze quantitatively environmental variable dynamics. The specific objectives are (1) to assess environmental variables based on remote sensing time series and (2) to develop empirical models to forecast environmental variables. These objectives have been achieved in four applications which specific objectives are (1) assessing and mapping cotton crop phenological stages using spectral and phenometric analyses, (2) assessing and modeling fire seasonality in two different ecoregions by dynamic models, (3) forecasting forest fire risk on a pixel basis by dynamic models, and (4) assessing vegetation functioning based on temporal autocorrelation and phenometric analysis. The results of this dissertation show the usefulness of function fitting procedures to model AS1 and AS2. Phenometrics derived from function fitting procedure makes it possible to identify cotton crop phenological stages. Spectral analysis has demonstrated quantitatively the presence of one cycle in AS2 and two in AS1 and the unimodal and bimodal behaviour of fire seasonality in the Mediterranean and temperate ecoregions respectively. Autoregressive models has been used to characterize the dynamics of fire seasonality in two ecoregions and to forecasts accurately fire risk on a pixel basis. The usefulness of temporal autocorrelation to define and characterized land surface functioning has been demonstrated. And finally the “Optical Functional Types” concept has been proposed, in this approach pixels could be as temporal unities based on its temporal dynamics or functioning.

The Spreading of Christianity and the introduction of Modern Architecture in Shannxi, China (1840-1949): Christian churches and traditional Chinese architecture

La arquitectura china ha experimentado grandes cambios a lo largo de un extenso proceso histórico. El hito de mayor importancia es el que da paso al denominado Tiempo Moderno, periodo en el cual irrumpe por vez primera en China la arquitectura occidental, que comienza a tener una influencia muy activa y significativa sobre los rasgos y la identidad de la arquitectura tradicional china, hasta ese momento el único estilo o forma de hacer –muy diferente, en cuanto a su concepción y fisonomía, de los planteamientos occidentales- que había sobrevivido sin desvíos significativos, configurando un panorama milenario bastante homogéneo en los aspectos técnicos y artísticos en el desarrollo de esa arquitectura. Por un cúmulo de complejas razones, la mayor parte de la arquitectura china del periodo feudal -es decir el que forman todos los años anteriores a 1849- ha desaparecido. Sin embargo, desde la fecha indicada hasta la Revolución de 1949 (el denominado periodo semicolonial o semifeudal), sí se conservan muchas edificaciones, que fueron mejor construidas y mantenidas luego, destacando por su importancia en ese sentido las iglesias cristianas. Dichos templos representan cronológicamente, no sólo la primera irrupción de la arquitectura clásica occidental en China, sino el inicio de un proceso de modernización de la profundamente enraizada y, en buena medida, estancada arquitectura vernácula, combinando técnicas y estilos de ambos planteamientos, para dar como resultado originales edificaciones de un singular eclecticismo que caracterizarían buena parte de la arquitectura de dicha etapa semicolonial. En términos generales, últimamente se ha ido prestando cada vez más atención a esta arquitectura de los tiempos modernos, aunque las iglesias cristianas de la provincia de Shaanxi no han sido objeto de estudio específico, a pesar de que su tipología es muy representativa de las construcciones de esta clase en otras regiones del interior de China. La investigación que desarrolla la presente tesis doctoral sale al paso de esa deficiencia, abriendo puertas a la continuación del trabajo referido, extendido a otras zonas o arquitecturas, y, por extensión, a la profundización analítica de la hibridación arquitectónica y cultural entre China y Occidente. Sobre las bases de investigación documental, estudios de campo y dibujo, la tesis plantea un estudio aclaratorio de los rasgos y raíces de la arquitectura tradicional china, al que sigue otro histórico y tipológico de los templos cristianos en la provincia de Shaanxi, deteniéndose en sus características fundamentales, situación (uso) actual y estado de conservación. Se ha considerado imprescindible añadir al trabajo, como apéndice, un elaborado glosario conceptual ilustrado de términos básicos arquitectónicos y constructivos, en chino, inglés y español. ABSTRACT The Chinese architecture has gone through great changes during the long process of history. The tremendous changing period was the named Modern Times of China when, for the very first time, the western architecture was introduced into China and became to influence majorly on the traditional Chinese architecture. Before that, the traditional Chinese architecture which has its own, yet totally different system from the occidental architecture system was the only architectural style could be found in China. Although, due to many historical, conceptual and architectural characteristic reasons, large amount of the ancient Chinese architecture built in the feudal China was not preserved, there are a lot of buildings of semi-feudal China that was well constructed and conserved. The most important architectural type of the semi-feudal China is the Christian Churches. It was not only the first western architectural form that was brought into and well developed in China, but also was the beginner of the modernization process of Chinese architecture. Because of the deep root of the 2000-year traditional Chinese architecture, all the Christian Churches built in China during the semi-colonial society has a combined style of both the traditional Chinese architecture and the classic western churches. They are a priceless asset of the Chinese architectural history. Recently, more and more attention had been paid on the Chinese Modern Times architecture, however, the Christian Churches in Shaanxi Province, the province which has a unique history with the Christian, but less economically developed have never been researched yet. The Christian Churches of Shaanxi Province reflect the general feature of developing history of the Christian Churches of common inner-land regions in China. The research opens the door to further study on other Christian Churches and related buildings, and also for the further study on the Chinese-western architectural and culture communication. On the base of document research, field survey and mapping, in this thesis, an in-depth study had been done on the general history of the features and roots of the traditional Chinese architecture, the developing history of the Christian Churches of Shaanxi Province and the architectural types, examples, characteristics, present situation and conservation status. By comparing the Christian Churches of the cities in Shaanxi province to the Christian Churches in other more developed cities, and by comparing the Christian Churches in China to the classic western churches, the architectural combination feature of the Christian Churches in China are highlighted. The thesis is a fundamental research on which many further studies about the architectural developing history, characteristics and conservation of the Christian Churches in China could be done. It is considered essential to add to the work, as an appendix, an elaborate conceptual illustrated glossary of architectural and construction terms in Chinese, English and Spanish.

Estimating the computational cost of logic programs

Information about the computational cost of programs is potentially useful for a variety of purposes, including selecting among different algorithms, guiding program transformations, in granularity control and mapping decisions in parallelizing compilers, and query optimization in deductive databases. Cost analysis of logic programs is complicated by nondeterminism: on the one hand, procedures can return múltiple Solutions, making it necessary to estímate the number of solutions in order to give nontrivial upper bound cost estimates; on the other hand, the possibility of failure has to be taken into account while estimating lower bounds. Here we discuss techniques to address these problems to some extent.

Comparison of fractal dimensions based on segmented NDVI fields obtained from different remote sensors.

Satellite image data have become an important source of information for monitoring vegetation and mapping land cover at several scales. Beside this, the distribution and phenology of vegetation is largely associated with climate, terrain characteristics and human activity. Various vegetation indices have been developed for qualitative and quantitative assessment of vegetation using remote spectral measurements. In particular, sensors with spectral bands in the red (RED) and near-infrared (NIR) lend themselves well to vegetation monitoring and based on them [(NIR - RED) / (NIR + RED)] Normalized Difference Vegetation Index (NDVI) has been widespread used. Given that the characteristics of spectral bands in RED and NIR vary distinctly from sensor to sensor, NDVI values based on data from different instruments will not be directly comparable. The spatial resolution also varies significantly between sensors, as well as within a given scene in the case of wide-angle and oblique sensors. As a result, NDVI values will vary according to combinations of the heterogeneity and scale of terrestrial surfaces and pixel footprint sizes. Therefore, the question arises as to the impact of differences in spectral and spatial resolutions on vegetation indices like the NDVI. The aim of this study is to establish a comparison between two different sensors in their NDVI values at different spatial resolutions.

Comparison of NDVI fields obtained from different remote sensors

Satellite image data have become an important source of information for monitoring vegetation and mapping land cover at several scales. Beside this, the distribution and phenology of vegetation is largely associated with climate, terrain characteristics and human activity. Various vegetation indices have been developed for qualitative and quantitative assessment of vegetation using remote spectral measurements. In particular, sensors with spectral bands in the red (RED) and near-infrared (NIR) lend themselves well to vegetation monitoring and based on them [(NIR - RED) / (NIR + RED)] Normalized Difference Vegetation Index (NDVI) has been widespread used. Given that the characteristics of spectral bands in RED and NIR vary distinctly from sensor to sensor, NDVI values based on data from different instruments will not be directly comparable. The spatial resolution also varies significantly between sensors, as well as within a given scene in the case of wide-angle and oblique sensors. As a result, NDVI values will vary according to combinations of the heterogeneity and scale of terrestrial surfaces and pixel footprint sizes. Therefore, the question arises as to the impact of differences in spectral and spatial resolutions on vegetation indices like the NDVI and their interpretation as a drought index. During 2012 three locations (at Salamanca, Granada and Córdoba) were selected and a periodic pasture monitoring and botanic composition were achieved. Daily precipitation, temperature and monthly soil water content were measurement as well as fresh and dry pasture weight. At the same time, remote sensing images were capture by DEIMOS-1 and MODIS of the chosen places. DEIMOS-1 is based on the concept Microsat-100 from Surrey. It is conceived for obtaining Earth images with a good enough resolution to study the terrestrial vegetation cover (20x20 m), although with a great range of visual field (600 km) in order to obtain those images with high temporal resolution and at a reduced cost. By contranst, MODIS images present a much lower spatial resolution (500x500 m). The aim of this study is to establish a comparison between two different sensors in their NDVI values at different spatial resolutions. Acknowledgements. This work was partially supported by ENESA under project P10 0220C-823. Funding provided by Spanish Ministerio de Ciencia e Innovación (MICINN) through project no. MTM2009-14621 and i-MATH No. CSD2006-00032 is greatly appreciated.

Estudio del impacto del usuario final en los procesos de desarrollo de sistemas de información

Durante décadas y aun en la actualidad muchas organizaciones, a nivel mundial, continúan afrontando pérdidas significativas debido a fracasos parciales y totales respecto a sus inversiones en sistemas de información (SI), planteando serios retos a los niveles gerenciales y los profesionales de SI. Estadísticas alarmantes y décadas de experiencia en la praxis en el área de SI en diversas organizaciones llevan al autor a poner el énfasis en los usuarios finales internos (UF) que son designados como representantes (UFR) de sus pares en los proyectos de desarrollo de SI (PDSI) por considerarlos como factores influyentes de manera significativa en el problema. Particularmente, con enfoque en ciertos factores de los UFR críticos para el éxito de los PDSI, con dimensiones analizadas de forma aislada o incompleta en otros estudios empíricos, a la fecha. No se encontraron estudios en Latinoamérica ni en otras latitudes que abordasen el fenómeno del éxito/fracaso de los SI desde el punto de vista adoptado en esta tesis. Por ello, esta investigación empírica ha evaluado en qué grado estos factores pudiesen influenciar los resultados durante el desarrollo e implementación de SI y su posible impacto en la satisfacción de los UF, siendo esta última aceptada por variados autores como la principal medida del éxito de los SI. Este estudio fue realizado en América Latina en las cuatro grandes empresas industriales que integran verticalmente el sector aluminio de Venezuela, sometidas a un macro PDSI para instalar el paquete, de tipo ERP, SAP/R3. Experimentados profesionales fueron encuestados o entrevistados, tales como altos ejecutivos, desarrolladores, líderes de proyecto y líderes de los UF. Un enfoque metodológico de triangulación permitió combinar un análisis cuantitativo con un análisis cualitativo interpretativo del tipo hermenéutico/dialéctico, hallándose resultados convergentes y complementarios. Un análisis estadístico, utilizando Partial Least Squares (PLS), seguido de un análisis hermenéutico/dialéctico. Los resultados confirmaron un hecho importante: en los casos problemáticos, paradójicamente, los orígenes de las razones de rechazo de esos SI argumentadas por los UF, en alto grado, apuntaron a los UFR o a ellos mismos. Los resultados también confirmaron la prevalencia de factores de orden cognitivo, conductual y político en estas organizaciones sobre los tecnológicos, al igual que el alto riesgo de dar por sentado la presencia y calidad de los factores requeridos de los UFR y de los otros factores estudiados. La validación estadística del modelo propuesto reveló al constructo conocimientos de los UFR como la principal variable latente, con los variables indicadoras que componen este constructo ejerciendo la mayor influencia sobre la calidad y el éxito de los SI. Un hallazgo contrario al de otros estudios, mostró que los conocimientos sobre las tecnologías de la información (TI) fueron los menos relevantes. Los SI de nómina y de administración de los RRHH fueron los más problemáticos, como suele ser el caso, por su complejidad en organizaciones grandes. Las conclusiones principales confirman el decisivo rol de los UF para el éxito de los PDSI y su relación con la creciente problemática planteada, la cual amerita más investigación y de las organizaciones una mayor atención y preparación. Descuidar los factores humanos y sociales así como una efectiva planificación y gestión de los mismos en preparación para estos proyectos origina serios riesgos. No obstante las limitaciones de este trabajo, la problemática analizada suele influir en los PDSI en diversas organizaciones, indistintamente de su tamaño o tipo de SI, estimándose, por tanto, que los resultados, conclusiones y recomendaciones de esta investigación tienen un alto grado de generalización. Una relación de indicadores claves es suministrada con fines preventivos. Finalmente, los factores evaluados pueden usarse para ampliar el modelo reconocido de DeLone y McLean (2003), conectándolos como variables latentes de sus variables independientes calidad de la información y calidad del SI. ABSTRACT For decades, many organizations worldwide have been enduring heavy losses due to partial and total failures regarding their investments in information systems (IS), posing serious challenges to all management levels and IS practitioners. Alarming statistics in this regard and decades of practice in the IS area lead the author to place an emphasis on the end users (EU) who are appointed in representation of their peers (EUR) to IS development projects (ISDP), considering them as highly influential factors on the problem. Especially, focusing on certain EUR success factors, and their dimensions, deemed critical to any IS development and implementation, omitted or not thoroughly analyzed neither in the theory nor in the empirical research on the subject, so far. No studies were found in Latin America or elsewhere addressing the phenomenon of IS success/failure from the perspective presented herein. Hence, this empirical research has assessed to what degree such factors can influence the outcomes of an ISDP and their feasible impact on the EU´s satisfaction, being the latter accepted by several authors as the main measure of IS success. This study was performed in Latin America embracing four major industrial enterprises, which vertically integrate the aluminum sector of Venezuela, subjected to a macro ISDP to install the ERP-type package SAP/R3. The field work included surveying and interviewing experienced professionals such as IS executives, IS developers, IS project leaders and end-user project leaders. A triangulation methodological approach allowed combining quantitative and interpretive analyses, obtaining convergent and complementing results. A statistical analysis, using Partial Least Squares (PLS), was carried out followed by a hermeneutical/dialectical analysis. Results confirmed a major finding: in problematic cases, paradoxically, the origins of IS rejection reasons argued by the EU, at a high degree, were usually traceable to the EUR and themselves. The results also confirmed the prevalence of cognitive, behavioral and political factors in these organizations as well as the high risk of taking for granted the presence and quality of those factors demanded from the EUR. The statistical validation of the proposed model revealed the construct EUR knowledge as the main latent variable, with its items exerting a major influence on IS quality and success. Another finding, in contradiction with that of other studies, proved knowledge of information technology (IT) aspects to be irrelevant. The payroll and the human resources administration IS were the most problematic, as is usually the case in large companies. The main conclusions confirm the EU´s decisive role for IS success and their relationship with the problem, which continues, demanding more research and, from organizations, more attention and preparation. Neglecting human and social factors in organizations as well as their effective planning and management in preparation for ISDP poses serious risks. Despite the limitations of this work, the analyzed problem tends to influence ISDP in a wide range of organizations; regardless of their size or type of IS, thus showing a high degree of generalization. Therefore it is believed that the results, conclusions and suggestions of this research have a high degree of generalization. A detailed checklist comprising key measures is provided for preventive actions. Finally, the factors evaluated can be used to expand the well-known model of DeLone & McLean (2003), by connecting them as latent variables of its independent variables information quality and IS quality.

El sistema de escuelas primarias de Juan O'Gorman, arquitecto : modernidad y eficiencia

El proceso de proyecto, llevado a cabo por Juan O’Gorman, para proyectar y construir más de veinticinco Escuelas Primarias en el Distrito Federal en menos de seis meses en 1932, necesariamente debió regirse por una metodología que permitiera conseguirlo. Esta investigación plantea la existencia de un método de proyecto que engloba toda la arquitectura de la etapa funcionalista de O’Gorman. Se considera la metodología, denominada en esta tesis Sistema Modular de las Escuelas Primarias, como un procedimiento proyectual evolutivo, conseguido a través de una investigación y experimentación continua. Inicia en 1929 con la realización de dos proyectos de vivienda particular, continúa con la génesis de un esquema de modulación que surge en unos proyectos de vivienda colectiva, se perfecciona en los proyectos de Escuelas Primarias del D.F. introduciendo criterios de estandarización y culmina con la adaptación a diversas circunstancias geométricas y climáticas que define la ubicación, en los casos concretos de la Escuela Vocacional Industrial de Tolsá y Tresguerras y la Escuela Primaria de Tampico en 1934. Este planteamiento destaca el valor de la obra funcionalista de aquel joven arquitecto, no sólo por lo novedoso que este nuevo lenguaje supuso en el México neo-colonial de los años 30, sino especialmente por la importancia que significó para la arquitectura mexicana contemporánea, la sistematización de procesos de proyecto -modulación y estandarización- para abordar una arquitectura inexistente en la época -la arquitectura social- de manera moderna y eficiente. La metodología empleada en la tesis implica la catalogación y mapeado de las Escuelas Primarias del D.F., lo cual aporta documentación original inédita. ABSTRACT The project process, carried out by Juan O’Gorman, to design and build more than twenty five elementary schools in less than six months in Mexico City in 1932, must have necessarily been governed by a thorough methodology in order to achieve this. This research posits the existence of a project method that encompasses all the architecture of O’Gorman’s functionalist stage. The methodology, known as “Modular System of Elementary Schools” in this thesis, is regarded as an evolutionary proyectual process, achieved through continuous research and experimentation. This methodology, which started in 1929 with the completion of two projects of private dwellings, continued with the creation of a modulation scheme arising from collective housing projects, later perfected in the Elementary School projects of Mexico City by introducing standardization criteria. Finally, it culminated in the adaptation to various geometric and climatic circumstances defined by the location, in the specific cases of the Industrial Vocational School of Tolsá and Tresguerras and Tampico’s Elementary School in 1934. This approach highlights the value of the young architect’s functionalist work, not only for the novelty of this new language in the neo-colonial Mexico of the 1930s, but especially because of the importance it meant to contemporary Mexican architecture, the systematization of project processes, -modulation and standardization- and addressing a nonexistent ‘social architecture’ at the time in a modern and efficient way. The methodology used in this thesis involves cataloging and mapping O’Gorman’s Elementary Schools in Mexico City, which provides unprecedented original documentation.

Asymptotically Toeplitz Hessenberg Operators and the Rieman mapping

In a recent work the authors have established a relation between the limits of the elements of the diagonals of the Hessenberg matrix D associated with a regular measure, whenever those limits exist, and the coe?cients of the Laurent series expansion of the Riemann mapping ?(z) of the support supp(?), when this is a Jordan arc or a connected nite union of Jordan arcs in the complex plane C. We extend here this result using asymptotic Toeplitz operator properties of the Hessenberg matriz.

Mapping of the Music Ontology to the Media Value Chain Ontology and the PROV Ontology

Mapping of the Music Ontology to the Media Value Chain Ontology and the PROV Ontology

Magnetic resonance imaging based signal intensity mapping predicts appropriate therapies after prophylactic ventricular tachycardia substrate ablation in patients with previous myocardial infarction and secondary prevention implantable cardioverter-defibrillator implantation

The aim of this study was to determine the capability of ceMRI based signal intensity (SI) mapping to predict appropriate ICD therapies after PVTSA.

Mapping Genetic Diversity of Cherimoya (Annona cherimola Mill.): Application of Spatial Analysis for Conservation and Use of Plant Genetic Resources.

There is a growing call for inventories that evaluate geographic patterns in diversity of plant genetic resources maintained on farm and in species' natural populations in order to enhance their use and conservation. Such evaluations are relevant for useful tropical and subtropical tree species, as many of these species are still undomesticated, or in incipient stages of domestication and local populations can offer yet-unknown traits of high value to further domestication. For many outcrossing species, such as most trees, inbreeding depression can be an issue, and genetic diversity is important to sustain local production. Diversity is also crucial for species to adapt to environmental changes. This paper explores the possibilities of incorporating molecular marker data into Geographic Information Systems (GIS) to allow visualization and better understanding of spatial patterns of genetic diversity as a key input to optimize conservation and use of plant genetic resources, based on a case study of cherimoya (Annona cherimola Mill.), a Neotropical fruit tree species. We present spatial analyses to (1) improve the understanding of spatial distribution of genetic diversity of cherimoya natural stands and cultivated trees in Ecuador, Bolivia and Peru based on microsatellite molecular markers (SSRs); and (2) formulate optimal conservation strategies by revealing priority areas for in situ conservation, and identifying existing diversity gaps in ex situ collections. We found high levels of allelic richness, locally common alleles and expected heterozygosity in cherimoya's putative centre of origin, southern Ecuador and northern Peru, whereas levels of diversity in southern Peru and especially in Bolivia were significantly lower. The application of GIS on a large microsatellite dataset allows a more detailed prioritization of areas for in situ conservation and targeted collection across the Andean distribution range of cherimoya than previous studies could do, i.e. at province and department level in Ecuador and Peru, respectively.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.