Theoretical analysis and numerical verification of the consistency of viscous smoothed-particle-hydrodynamics formulations in simulating free-surface flows

The theoretical formulation of the smoothed particle hydrodynamics (SPH) method deserves great care because of some inconsistencies occurring when considering free-surface inviscid flows. Actually, in SPH formulations one usually assumes that (i) surface integral terms on the boundary of the interpolation kernel support are neglected, (ii) free-surface conditions are implicitly verified. These assumptions are studied in detail in the present work for free-surface Newtonian viscous flow. The consistency of classical viscous weakly compressible SPH formulations is investigated. In particular, the principle of virtual work is used to study the verification of the free-surface boundary conditions in a weak sense. The latter can be related to the global energy dissipation induced by the viscous term formulations and their consistency. Numerical verification of this theoretical analysis is provided on three free-surface test cases including a standing wave, with the three viscous term formulations investigated.

Comportamiento a fatiga de uniones a solape simple con adhesivo epoxi de acero y acero prepintado

(SPA)Las propiedades mecánicas de las uniones adhesivas no solo dependen de la naturaleza y propiedades de los adhesivos; hay muchos otros parámetros que influyen directamente en el comportamiento de las uniones adhesivas. Algunos de los más significativos son: el acabado superficial de los materiales, área y espesor de la capa adhesiva, un diseño adecuado, secuencia de aplicación, propiedades químicas de la superficie y preparación de los sustratos antes de aplicar el adhesivo. La resistencia mecánica de las uniones adhesivas está íntimamente relacionada con el proceso de rotura, directamente dependiente del mecanismo cohesión-adhesión. El objeto de este trabajo es analizar la influencia de dos acabados superficiales diferentes, sobre el comportamiento a fatiga de uniones con adhesivo epoxi. Los resultados muestran que la compatibilidad química entre el adhesivo y la capa prepintada mejora la adhesión de las uniones y la resistencia mecánica frente a cargas estáticas y dinámicas. Se ha obtenido el límite de fatiga para las uniones de ambas superficies. (ENG)The mechanical properties of adhesive joints depend not only on the nature and properties of the adhesives; there are many parameters which influence the behaviour of the adhesive joints. Some of more significant parameters are: the surface conditions of materials, area and thickness of adhesive layer, compatibility of the design, applying sequence, chemical properties of surface and the surface treatments of substrates prior to be bonded. The mechanical resistance of adhesive joints is interrelated to the fracture process depended on cohesion-adhesion mechanism. The aim of this paper is analyse the influence of two different surfaces on the fatigue behaviour of epoxy adhesive joints. The results show that chemical compatibility of adhesive and paint improve adhesion of joints and the mechanical resistance against static and dynamic loads. The fatigue limited has been obtained for joints with both surfaces.

Ni lo uno, ni lo otro: posibilidad de lo neutro en arquitectura

Esta investigación se ocupa de comprobar la viabilidad de un término, un concepto que se detecta como posible instrumento para nombrar algunas operaciones en arquitectura. Ese concepto es Lo Neutro. Frente al sistema de dualidades con el que enunciamos lo real, lo Neutro se sitúa, no tanto en el punto medio, como en el punto opuesto a ambos términos. No es la conjunción de contrarios, sino aquello que desvía la propia pregunta que obliga a elegir. Próximo a los conceptos de indefinición, indiferencia e inacción, lo Neutro se revela como un mecanismo fundamental de disolución. Reconociendo en la lengua varios sentidos para el término, con cada capítulo, la tesis va construyendo una definición ampliada de lo Neutro hasta configurar un conjunto de significados aplicables a la arquitectura. El primero de ellos es el que se deriva del concepto de indiferencia funcional. Tras un análisis del contexto teórico sobre el que se asienta la dialéctica bi-direccional forma-función, su consolidación en los primeros años del siglo XX y también su puesta en crisis mediante la introducción de nociones multi-relacionales como ‘entorno’ y ‘sistema’, la investigación propone tres modelos de estudio: la Planta Tipo, la Planta Única y la Planta de Equivalencias. En cada uno de estos casos, aunque el tema fundamental es la neutralidad programática, se reconoce también la presencia de los mecanismos geométricos y operaciones conceptuales que lo Neutro utiliza para generar respectivamente condiciones de ‘soporte’, de ‘marco’ o de ‘campo’. Estas tres condiciones espaciales apuntan a un entendimiento de lo Neutro que asocia su fórmula de doble negación (ni lo uno, ni lo otro) con el estado más incipiente de la materia, aquel en el que todavía no es pero que contiene ya todos los elementos de posibilidad de ser: lo Neutro como potencia. Aquello que la lógica nos impide afirmar, que una cosa es y no-es al mismo tiempo, nos lo concede la categoría aristotélica de la potencia. Por ello, en la última parte de la tesis se desarrollan de forma más autónoma aquellos temas vinculados con estos tres tipos de espacio que se basan en la renuncia, abordando la cuestión de la potencialidad desde la negación. Partiendo de dos condiciones superficiales básicas, la del muro vertical y la del suelo horizontal, se analizan algunos discursos basados en una restricción radical a estos dos elementos. Así, el muro ciego encuentra su precedente artístico en el lienzo en blanco y la tabula rasa se pone en relación con el concepto de ‘terrain vague’. Por último, la posibilidad de toda potencia de no actualizarse lleva a explorar el no-hacer como renuncia voluntaria y su capacidad de transformarse en acto de resistencia. ABSTRACT The concern of this research is to test the feasibility of a term, a concept that has been detected as a potential tool to name some architectural operations. That concept is the Neutral. In front of the dualities system with which we enounce the real, the Neutral places itself, not so much in the midpoint as in the opposite point of both terms. It is not the conjunction of the contraries, but that which deflects the question itself that compels us to make a choice. Recognizing the multiple interpretations of the term in the common language, with each chapter, the thesis builds an expanded definition of the Neutral to configure a set of meanings applicable to architecture. The first of them is the one that derives from the concept of functional indifference. After an analysis of the theoretical context in which the two-way dialectic between form and function lies, its consolidation in the early twentieth century and its call into crisis by the introduction of multi-relational concepts such as 'environment' and 'system', the research suggests three study models: the Typical Plan, the Single Plan and the Equivalents Plan. In each of these cases, although the fundamental issue is programmatic neutrality, it also recognizes the presence of geometric mechanisms and conceptual operations that the Neutral uses to generate respectively 'support', 'frame' or 'field' conditions. These three spatial conditions point to an understanding of the Neutral which associates its double negation formula (neither one nor the other) with the most incipient state of matter, that in which it not yet is, but already contains every element of the possibility of being: the neutral as potentiality. That which logic does not allow us to affirm, that one thing is and is-not at the same time, it is granted by the Aristotelian category of potentiality. Therefore, in the last part of the thesis, the topics relating these three types of space which are based on renouncement are more autonomously developed, addressing the issue of potentiality from the standpoint of denial. Starting from two basic surface conditions, the vertical wall and the horizontal floor, some speeches based on a radical restriction on these two elements are analyzed. Thus, the blind wall finds its artistic precedent in the blank canvas and the tabula rasa attitude gets in relation to the concept of ‘terrain vague’. Finally, the possibility of any potency of not being updated leads to explore the not-doing as voluntary resignation and its ability to transform itself into an act of resistance.

Ni lo uno, ni lo otro: posibilidad de lo neutro en arquitectura

Esta investigación se ocupa de comprobar la viabilidad de un término, un concepto que se detecta como posible instrumento para nombrar algunas operaciones en arquitectura. Ese concepto es Lo Neutro. Frente al sistema de dualidades con el que enunciamos lo real, lo Neutro se sitúa, no tanto en el punto medio, como en el punto opuesto a ambos términos. No es la conjunción de contrarios, sino aquello que desvía la propia pregunta que obliga a elegir. Próximo a los conceptos de indefinición, indiferencia e inacción, lo Neutro se revela como un mecanismo fundamental de disolución. Reconociendo en la lengua varios sentidos para el término, con cada capítulo, la tesis va construyendo una definición ampliada de lo Neutro hasta configurar un conjunto de significados aplicables a la arquitectura. El primero de ellos es el que se deriva del concepto de indiferencia funcional. Tras un análisis del contexto teórico sobre el que se asienta la dialéctica bi-direccional forma-función, su consolidación en los primeros años del siglo XX y también su puesta en crisis mediante la introducción de nociones multi-relacionales como ‘entorno’ y ‘sistema’, la investigación propone tres modelos de estudio: la Planta Tipo, la Planta Única y la Planta de Equivalencias. En cada uno de estos casos, aunque el tema fundamental es la neutralidad programática, se reconoce también la presencia de los mecanismos geométricos y operaciones conceptuales que lo Neutro utiliza para generar respectivamente condiciones de ‘soporte’, de ‘marco’ o de ‘campo’. Estas tres condiciones espaciales apuntan a un entendimiento de lo Neutro que asocia su fórmula de doble negación (ni lo uno, ni lo otro) con el estado más incipiente de la materia, aquel en el que todavía no es pero que contiene ya todos los elementos de posibilidad de ser: lo Neutro como potencia. Aquello que la lógica nos impide afirmar, que una cosa es y no-es al mismo tiempo, nos lo concede la categoría aristotélica de la potencia. Por ello, en la última parte de la tesis se desarrollan de forma más autónoma aquellos temas vinculados con estos tres tipos de espacio que se basan en la renuncia, abordando la cuestión de la potencialidad desde la negación. Partiendo de dos condiciones superficiales básicas, la del muro vertical y la del suelo horizontal, se analizan algunos discursos basados en una restricción radical a estos dos elementos. Así, el muro ciego encuentra su precedente artístico en el lienzo en blanco y la tabula rasa se pone en relación con el concepto de ‘terrain vague’. Por último, la posibilidad de toda potencia de no actualizarse lleva a explorar el no-hacer como renuncia voluntaria y su capacidad de transformarse en acto de resistencia. ABSTRACT The concern of this research is to test the feasibility of a term, a concept that has been detected as a potential tool to name some architectural operations. That concept is the Neutral. In front of the dualities system with which we enounce the real, the Neutral places itself, not so much in the midpoint as in the opposite point of both terms. It is not the conjunction of the contraries, but that which deflects the question itself that compels us to make a choice. Recognizing the multiple interpretations of the term in the common language, with each chapter, the thesis builds an expanded definition of the Neutral to configure a set of meanings applicable to architecture. The first of them is the one that derives from the concept of functional indifference. After an analysis of the theoretical context in which the two-way dialectic between form and function lies, its consolidation in the early twentieth century and its call into crisis by the introduction of multi-relational concepts such as 'environment' and 'system', the research suggests three study models: the Typical Plan, the Single Plan and the Equivalents Plan. In each of these cases, although the fundamental issue is programmatic neutrality, it also recognizes the presence of geometric mechanisms and conceptual operations that the Neutral uses to generate respectively 'support', 'frame' or 'field' conditions. These three spatial conditions point to an understanding of the Neutral which associates its double negation formula (neither one nor the other) with the most incipient state of matter, that in which it not yet is, but already contains every element of the possibility of being: the neutral as potentiality. That which logic does not allow us to affirm, that one thing is and is-not at the same time, it is granted by the Aristotelian category of potentiality. Therefore, in the last part of the thesis, the topics relating these three types of space which are based on renouncement are more autonomously developed, addressing the issue of potentiality from the standpoint of denial. Starting from two basic surface conditions, the vertical wall and the horizontal floor, some speeches based on a radical restriction on these two elements are analyzed. Thus, the blind wall finds its artistic precedent in the blank canvas and the tabula rasa attitude gets in relation to the concept of ‘terrain vague’. Finally, the possibility of any potency of not being updated leads to explore the not-doing as voluntary resignation and its ability to transform itself into an act of resistance.

Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study

Nowadays, one of the main objectives that affects the development of any new product is the respect for the environment. Until the late 80's, the development and manufacture of the most of the product were aimed to achieve maximum quality in time and costs with environmental issues relegated to secondary importance. On the other hand, in the 90's, the pressure from factors such as markets, financial and legislative factors, led to environmental considerations being taken into account. In this context, the current aeronautical industry strategies are based on the search for economic, environmental and energy efficiency considerations for all the processes involved in the aircraft manufacturing.

High optical sensitivity to ambient conditions of uncapped InGaAs surface quantum dots

The influence of the environment on the optical properties of self-assembled In0.5Ga0.5As surface quantum dots is studied as a function of different ambient conditions for sensing applications. Their room temperature photoluminescence (PL) quenches under vacuum and decreases strongly under dry O2 or N2 environments. Nevertheless, they have a strong signal at 1.55 lm in air or in a wet atmosphere. The presence of water molecules in the environment improves the PL intensity likely due to its polar character and therefore its easier adsorption by the surface dangling bonds, leading to a suppression of the non-radiative recombination centers.

Analysis of adaptive responses of Pinus pinaster to changing environmental conditions in the Mediterranean region

Recent climate evolution studies highlight the progressive temperature increase and prevalence of seasonal drought, with specially incidence in the Mediterranean region. Although conifers are very important species regarding forest conservation, sustainability and productivity, given the large forest surface they cover in Spain and their active role in preventing soil erosion and desertification, we know little about the molecular mechanisms which control adaptation in this ancient taxonomic group

Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys

Profiting by the increasing availability of laser sources delivering intensities above 10 9 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically steels and Al and Ti alloys) under different LSP irradiation conditions are presented