Storm evolution characterization for analysing stone armour damage progression

Storm evolution is fundamental for analysing the damage progression of the different failure modes and establishing suitable protocols for maintaining and optimally sizing structures. However, this aspect has hardly been studied and practically the whole of the studies dealing with the subject adopt the Equivalent triangle storm. As against this approach, two new ones are proposed. The first is the Equivalent Triangle Magnitude Storm model (ETMS), whose base, the triangular storm duration, D, is established such that its magnitude (area describing the storm history above the reference threshold level which sets the storm condition),HT, equals the real storm magnitude. The other is the Equivalent Triangle Number of Waves Storm (ETNWS), where the base is referred in terms of the real storm's number of waves,Nz. Three approaches are used for estimating the mean period, Tm, associated to each of the sea states defining the storm evolution, which is necessary to determine the full energy flux withstood by the structure in the course of the extreme event. Two are based on the Jonswap spectrum representativity and the other uses the bivariate Gumbel copula (Hs, Tm), resulting from adjusting the storm peaks. The representativity of the approaches proposed and those defined in specialised literature are analysed by comparing the main armour layer's progressive loss of hydraulic stability caused by real storms and that relating to theoretical ones. An empirical maximum energy flux model is used for this purpose. The agreement between the empirical and theoretical results demonstrates that the representativity of the different approaches depends on the storm characteristics and point towards a need to investigate other geometrical shapes to characterise the storm evolution associated with sea states heavily influenced by swell wave components.

Storm characterization for analyzing stone armour damage progression

Storm evolution is fundamental for analysing the damage progression of the different failure modes and establishing suitable protocols for maintaining and optimally sizing structures. However, this aspect has hardly been studied and practically the whole of the studies dealing with the subject adopt the Equivalent triangle storm. As against this approach, two new ones are proposed. The first is the Equivalent Triangle Magnitude Storm model (ETMS), whose base, the triangular storm duration, D, is established such that its magnitude (area describing the storm history above the reference threshold level which sets the storm condition),HT, equals the real storm magnitude. The other is the Equivalent Triangle Number of Waves Storm (ETNWS), where the base is referred in terms of the real storm's number of waves,Nz. Three approaches are used for estimating the mean period, Tm, associated to each of the sea states defining the storm evolution, which is necessary to determine the full energy flux withstood by the structure in the course of the extreme event. Two are based on the Jonswap spectrum representativity and the other uses the bivariate Gumbel copula (Hs, Tm), resulting from adjusting the storm peaks. The representativity of the approaches proposed and those defined in specialised literature are analysed by comparing the main armour layer's progressive loss of hydraulic stability caused by real storms and that relating to theoretical ones. An empirical maximum energy flux model is used for this purpose. The agreement between the empirical and theoretical results demonstrates that the representativity of the different approaches depends on the storm characteristics and point towards a need to investigate other geometrical shapes to characterise the storm evolution associated with sea states heavily influenced by swell wave components.

Identification of Degraded Land in the Canary Islands; Tests and Reviews

Degraded Land is an area that either by natural causes (fires, floods, storms or volcanic eruptions) or more by direct or indirect causes of human action, has been altered or modified from its natural state. Restoration is an activity that initiates or accelerates the recovery of an ecosystem. It can be defined as the set of actions taken in order to reverse or reduce the damage caused in the territory. In the case of the Canary Islands there is a high possibility for the territory to suffer processes that degrade the environment, given that the islands are very fragile ecosystems. Added to this they are territories isolated from the continent, which complicates the process of restoring them. In this paper, the different types of common degraded areas in the Canary Islands are identified, as well as the proposed solutions for remediation, such as afforestation of agricultural land or landfill closure and restoration.

Caracterización multivariada de los temporales para su aplicación en el dimensionamiento del manto principal

En esta tesis se presenta una metodología para la caracterización del oleaje, dentro del marco de las nuevas Recomendaciones para Obras Marítimas (ROM 0.0.-00 y ROM 1.0-09), por ser una de las principales acciones que afectan a la estabilidad de las estructuras marítimas. Debido al carácter aleatorio intrínsecamente multivariado de la acción considerada, las tormentas, su caracterización paramétrica se realiza en términos de funciones cópula uniparamétricas. Las variables consideradas son altura de ola significante del pico de la tormenta, el periodo medio asociado y la magnitud, o número de olas, de todo el ciclo de solicitación. Para establecer un patrón teórico de evolución de la tormenta que permita extrapolar las muestras fuera de la región con datos se analizan los modelos teóricos existentes, comprobándose que no reproducen adecuadamente las tormentas constituidas por estados de mar con un peso importante de oleaje swell. Para evitar esta limitación se proponen cuatro modelos teóricos de evolución de tormentas con distintas formas geométricas. El análisis de los modelos existentes y los propuestos pone de relieve que el Modelo Magnitud Equivalente de Tormenta (EMS= Equivalent Magnitude Storm) con la forma triangular es el que mejor adapta las tormentas constituidas por estados de mar típicos del viento. Para tormentas con un mayor grado de desarrollo, el modelo teórico de tormenta EMS con la forma trapezoidal es el adecuado. De las aproximaciones propuestas para establecer el periodo medio de los sucesivos estados de mar del ciclo de solicitación. la propuesta por Martín Soldevilla et al., (2009) es la más versátil y , en general , mejor reproduce la evolución de todo tipo de tormentas. La caracterización de las tormentas se complementa con la altura de ola máxima. Debido a la mayor disponibilidad y longitud temporal de los datos sintéticos frente a las registros, la práctica totalidad de los análisis de extremos se realizan con tormentas sintéticas en las que la distribución de olas individuales es desconocida. Para evitar esta limitación se utilizan modelos teóricos de distribución de olas acordes a las características de cada uno de los estados de mar que conforman la tormenta sintética. Para establecer dichas características se utiliza la curtosis y en función de su valor la altura de ola máxima se determina asumiendo una determinada distribución de olas. Para estados de mar lineales la distribución de olas individuales de Rayleigh es la considerada. Para condiciones no lineales de gran ancho de banda el modelo de distribución de olas propuesto por Dawson, (2004) es el utilizado y si es de banda estrecha las predicciones de (Boccotti, (1989), Boccotti et al., (2013)) se compara con las resultantes del modelo de Dawson. La caracterización de la evolución de las tormentas en términos multivariados es aplicada al estudio de la progresión del daño del manto principal de diques en talud, y al rebase de las olas. Ambos aspectos cubren el segundo objetivo de la tesis en el que se propone una nueva formulación para el dimensionamiento de mantos constituidos por bloques cúbicos de hormigón. Para el desarrollo de esta nueva formulación se han utilizado los resultados recogidos en los estudios de estabilidad del manto principal de diques talud realizados en modelo físico a escala reducida en el Centro de Estudios de Puertos y Costas (CEDEX) desde la década de los 80 empleando, en su mayoría, bloques paralelepípedos cúbicos de hormigón. Por este motivo y porque los últimos diques construidos en la costa Española utilizan este tipo de pieza, es por lo que la formulación planteada se centra en este tipo de pieza. Después de un primer análisis de las fórmulas de cálculo y de evolución existentes, se llega a la conclusión de que es necesario realizar un esfuerzo de investigación en este campo, así como ensayos en laboratorio y recogida de datos in-situ con base a desarrollar fórmulas de evolución de daño para mantos constituidos por piezas diferentes a la escollera, que tenga en cuenta las principales variables que condiciona su estabilidad. En esta parte de la tesis se propone un método de análisis de evolución de daño, que incluye el criterio de inicio de avería, adecuada para diques en talud constituidos por bloque cúbicos de hormigón y que considera la incidencia oblicua, el daño acumulado y el rebase. This thesis proposes a methodology to estimate sea waves, one of the main actions affecting the maritime structures stability, complying with (ROM 0.0.-00 & ROM 1.0-09.Due to the multivariate behavior of sea storms, the characterization of the structures of sea storms is done using copula function. The analyzed variables are the significant height wave, mean period and magnitude or number of waves during the storm history. The storm evolution in terms of the significant height wave and the mean period is also studied in other to analyze the progressive failure modes. The existing models of evolution are studied, verifying that these approximations do not adjust accurately for developed waves. To overcome this disadvantage, four evolution models are proposed, with some geometrical shapes associated to fit any development degree. The proposed Equivalent Magnitude Storm model, EMS, generally obtains the best results for any kind of storm (predominant sea, swell or both). The triangle is recommended for typical sea storms whereas the trapezoid shape is much more appropriate for more developed storm conditions.The Martín Soldevilla et al., (2009) approach to estimate the mean period is better than others approaches used.The storm characterization is completed with the maximum wave height of the whole storm history. Due to synthetic historical waves databases are more accessible and longer than recorded database, the extreme analyses are done with synthetic data. For this reason the individual waves’ distribution is not known. For that limitation to be avoided, and depending on the characteristics of every sea states, one theoretical model of waves is choose and used. The kurtosis parameter is used to distinguish between linear and nonlinear sea states. The Rayleigh model is used for the linear sea states. For the nonlinear sea states, Dawson, (2004) approach is used for non-narrow bandwidth storms, comparing the results with the Boccotti, (1989), Boccotti et al., (2013) approach, with is used for narrow bandwidth storms. The multivariate and storm evolution characterization is used to analyze of stone armour damage progression and wave overtopping discharge. Both aspects are included in the second part of the thesis, with a new formula is proposed to design cubes armour layer. The results the stability studies of armour layer, done in the Centre for Harbours and Coastal Studies (CEDEX) laboratory are used for defining a new stability formula. For this reason and because the last biggest breakwater built in Spain using the cube, the damage progression is analyze for this kind of concrete block. Before to analyze the existing formulae, it is concluded that it is necessary more investigation, more tests in laboratory and data gathering in situ to define damage evolution formulae to armour of other kind of pieces and that takes to account the principal variables. This thesis proposed a method to calculate the damage progression including oblique waves, accumulated damage, and overtopping effect. The method also takes account the beginning of the movement of the blocks.

Metodología para la gestión integral de las presas de laminación de avenidas y su aplicación a la cuenca hidrográfica del Segura

En el levante español se producen periódicamente intensos aguaceros (gota fría), que generan grandes riadas, desbordándose los cauces y asolando los campos y las ciudades, ocasionando graves daños en la economía local y con frecuencia, por desgracia, víctimas personales. La Confederación Hidrográfica del Segura ha puesto en marcha un vasto sistema de protección, conocido como Plan de Defensa contra Avenidas, del que ya se encuentran en explotación un conjunto de presas cuyo objetivo prioritario es la laminación de las avenidas. Las presas de laminación ubicadas en esta área mediterránea son estructuras muy singulares, al estar ubicadas en cuencas extremadamente secas, con alta pendiente, rápida respuesta, picos altos de caudal, y gran poder erosivo del flujo. Las aguas arrastran en suspensión un alto porcentaje de aporte sólido y flotantes, que quedan retenidos en el embalse, aterrándolo e inutilizando los desagües. En esta tesis doctoral se analizan los criterios de actuación para la gestión de estas presas de laminación, con objeto de que se puedan introducir en las Normas de Explotación innovaciones destinadas a mejorar la eficiencia del conjunto, de manera que se consiga la máxima protección posible y al mismo tiempo se puedan aprovechar las aguas, sin menoscabo de su objetivo prioritario, para otros fines complementarios. Como consecuencia del trabajo realizado se indica la conveniencia de establecer un conjunto de normas de actuación comunes a todas las presas del sistema, como es la estrategia de recibir siempre a los hidrogramas de la riada con las compuertas de los desagües de fondo cerrados, o la conveniencia de que en todas las presas se dispongan compuertas en estos órganos. También se dictan recomendaciones en la gestión del vaciado, para conseguir el máximo aprovechamiento del agua, introduciendo el concepto innovador de los trasvases virtuales. Asimismo, se analiza la conveniencia de fijar normas diferenciales específicas atendiendo a las peculiaridades de cada presa, en cuanto se refiere al nivel máximo de explotación, al cumplimiento de los condicionantes ambientales, al mantenimiento de la calidad del agua, y a otros aspectos singulares que caracterizan a cada uno de estos embalses. The Spanish Mediterranean region hydrology is characterised by low rainfall, but concentrated in extreme convective events. Those heavy rains and storms lead to large, flash-floods which cause devastation of fields, villages and, unfortunately, loss of lives. Segura River Basin Authority has developed an ambitious plan for flood protection and control that is constituted by a system of flood protection dams, river channelling, river diversions diversions and levees. Flood protection dams placed on this area, are distinct structures, as they are located on extremely dry basins, with high slopes and limited vegetal covering. These facts, along with the very high rainfall intensity, are determinants of a rapid response and a very erosive flow. The flow transports a large rate of solids in suspension, and also debris, which many times block and clog the outlets intakes, disabling them. In such a case, the dam would be inoperative, in an emergency state and remedial measures should be taken. This PhD thesis analyses the flood protection dams operation criteria, for providing managers a methodology to analyse each individual case and also the flood protection system as a whole. Additionally practical rules and recommendations, to cope with the objectives of dam safety, flood protection and water resources use, are given. The rules consider the specific differences and risks that may be faced by the dams. To that end, they were grouped, depending on their characteristics: allowance for permanent water storage, environmental restrictions, water quality, geotechnical problems, type of structure, etc. As a result of this research, it is recommended to design these dams with valves for regulating the bottom outlets. The availability of valves is linked with the routing strategy of receiving flood with the outlets closed. This has been shown as the best measure to prevent clogging and opens the possibility of storing temporarily the water, making then a scheduled emptying of the reservoir, which could be computed as a virtual transfer to the regulating dams. Emptying should be done in accordance with the situation of the other dams of the system and of the rivers downstream. This detention time would make possible also the beginning of the sedimentation process which is necessary for using the water with the modern irrigation systems that are in use in this area.

Proyecto y lugar en la arquitectura doméstica de Jørn Utzon

En medio de un bosque danés, de altos arboles que se mueven al fuerte viento nórdico bajo el débil sol de las latitudes altas, y cargado de unos cuantos tableros de madera que consiguió de una exposición ya terminada, realizó Utzon su maqueta a escala real de su primera casa familiar en Hellebæk (1950-52) a la edad de treinta y dos años. De la misma manera que el pintor William Turner necesitó atarse a lo alto de un mástil de un barco, para vivir en directo una de las muchas tormentas que tantas y tantas veces había pintado en sus cuadros, el joven Utzon consideró indispensable introducirse dentro de la maqueta de su propia casa antes de construirla, para valorar in situ las potencialidades de aquel proyecto en relación al lugar. La obra de Jørn Utzon (1918-2008) es una arquitectura expectante y atenta del lugar donde se ubica. Jørn Utzon es un arquitecto de origen nórdico, que descubre su verdadera idiosincrasia en la cultura mediterránea, cultura en la que reside durante casi la mitad de toda su vida. Esta tesis se ha centrado en analizar exhaustivamente la relación de su arquitectura doméstica con el lugar donde se halla. Aspecto tan citado en la bibliografía existente de su obra, aunque nunca desarrollado de manera exhaustiva. El objetivo del análisis ha sido intentar encontrar invariantes o patrones que pudieran subyacer en su obra residencial en relación a ese tema. Para dicho análisis, se ha tomado una muestra suficientemente amplia de veinte viviendas o conjuntos residenciales (entre ellas sus cuatro viviendas familiares proyectadas), repartidas por cinco países (Suecia, Dinamarca, Reino Unido, España y Nueva Gales del Sur), que constituyen la tercera parte de su obra doméstica y la mitad de su obra construida residencial, así como las citas explícitas del autor sobre este tema en su obra escrita, y los planos o croquis de su obra gráfica. Como metodología de trabajo se ha recurrido a la consulta de las fuentes primarias: viajando y conociendo in-situ las casas seleccionadas en Dinamarca, Suecia, España y Australia; viviendo un mes en una de las casas (Can Lis) gracias a una beca del Gobierno danés y la Utzon Foundation; y realizando entrevistas a las personas que más cerca estuvieron del arquitecto en su entorno familiar y profesional. Asimismo, también se ha publicado parte de su contenido en medios internacionales: 4th International Utzon Symposium (7/3/2013-9/3/2014) y la página web oficial de Can Lis dependiente de la Utzon Foundation (www.canlis.dk). Las doce invariantes encontradas en relación al proyecto y lugar en los proyectos seleccionados, han sido agrupadas en torno a tres grandes elementos sobre los que Utzon constantemente reflexiona en sus escritos propios: horizonte, sol y material autóctono. Elementos que tienen su origen en la influencia que la navegación tuvo en su vida, y en su carácter espiritual y austero en lo material. La historia de Utzon es la de un nórdico, de vocación navegante, que encuentra su lugar en la cultura mediterránea, rodeado entre piedras de Marés, mientras divisa en silencio el horizonte marino en el umbral entre luz y sombra. ABSTRACT In the middle of a Danish forest, with high trees which move with the Nordic wind under the weak sun of high latitudes, and with the help of some wooden canvases acquired from an already completed exhibition, Jørn Utzon built a real-scale model of his first family house in Hellebæk (1950-52) at the age of thirty-two. In the same way that William Turner needed to be tied up on the top of a boat flagpole in order to have a first-hand experience of one of the many storms that he had depicted in his paintings so many times before, the young Utzon thought it was crucial to go into the model of his own house before building it, to evaluate in situ the potential of that project in relation to the place. Utzon’s work is architecture interested in and attentive of the place where it is situated. Jørn Utzon (1918-2008) is an architect of Nordic origin who discovered his own idiosyncrasy in the Mediterranean culture, in which he resided for half of his live. This thesis has focused on an exhaustive analysis of the relation between his domestic architecture and the place where it is located. This issue has been often cited in the existing bibliography, although it has never been exhaustively developed. The analysis objective has been to attempt to find invariants and patterns that could exist in his domestic work in relation to this subject. For this analysis, a sufficiently large sample has been selected: twenty houses or housing complexes (among others his own four family houses), distributed in five countries (Sweden, Denmark, United Kingdom, Spain and New South Wales), which constitute the third part of his domestic work, and half of his residential constructed projects, as well as Utzon’s written texts about this theme, and the drawings and sketches of his graphic work. The methodology used was based on consultation of primary sources: travelling and examining in situ the selected houses in Denmark, Sweden, Spain and Australia; living for a month in one of the houses (Can Lis) thanks to a research grant from the Danish Government and the Utzon Foundation; and interviewing people from his closest family and professional circles. Furthermore, part of the thesis has been published in international media: 4th International Utzon Symposium (7/3/2013-9/3/2014) and on the official web site of Can Lis, an Utzon Foundation subsidiary(www.canlis.dk). The twelve invariants discovered in relation to the project and the location of the selected projects, have been grouped according to three elements which Utzon continuously reflects upon in his own writings: the horizon, the sun and autochthonous material. Elements which originate from the influence that navigation had in his life, and from his spiritual and austere character. The story of Utzon is that of a Nordic person, with the vocation of a navigator, who found his place in the Mediterranean culture, surrounded with Marés stones, while silently making out the sea horizon on the threshold between light and shadow.

Improvement of theoretical storm characterization for different climate conditions

The different theoretical models related with storm wave characterization focus on determining the significant wave height of the peak storm, the mean period and, usually assuming a triangle storm shape, their duration. In some cases, the main direction is also considered. Nevertheless, definition of the whole storm history, including the variation of the main random variables during the storm cycle is not taken into consideration. The representativeness of the proposed storm models, analysed in a recent study using an empirical maximum energy flux time dependent function shows that the behaviour of the different storm models is extremely dependent on the climatic characteristics of the project area. Moreover, there are no theoretical models able to adequately reproduce storm history evolution of the sea states characterized by important swell components. To overcome this shortcoming, several theoretical storm shapes are investigated taking into consideration the bases of the three best theoretical storm models, the Equivalent Magnitude Storm (EMS), the Equivalent Number of Waves Storm (ENWS) and the Equivalent Duration Storm (EDS) models. To analyse the representativeness of the new storm shape, the aforementioned maximum energy flux formulation and a wave overtopping discharge structure function are used. With the empirical energy flux formulation, correctness of the different approaches is focussed on the progressive hydraulic stability loss of the main armour layer caused by real and theoretical storms. For the overtopping structure equation, the total volume of discharge is considered. In all cases, the results obtained highlight the greater representativeness of the triangular EMS model for sea waves and the trapezoidal (nonparallel sides) EMS model for waves with a higher degree of wave development. Taking into account the increase in offshore and shallow water wind turbines, maritime transport and deep vertical breakwaters, the maximum wave height of the whole storm history and that corresponding to each sea state belonging to its cycle's evolution is also considered. The procedure considers the information usually available for extreme waves' characterization. Extrapolations of the maximum wave height of the selected storms have also been considered. The 4th order statistics of the sea state belonging to the real and theoretical storm have been estimated to complete the statistical analysis of individual wave height